Related
Hi
Someone have at eonon GA5165F for BMW E9X?
I need to know the original configuration for this unit.
Rui tomas said:
Hi
Someone have at eonon GA5165F for BMW E9X?
I need to know the original configuration for this unit.
Click to expand...
Click to collapse
What do you mean by "original configuration" ?
Which head unit manufacturer is it ?
GA5165F BMW 323i E90 2011
typos1 said:
What do you mean by "original configuration" ?
Which head unit manufacturer is it ?
Click to expand...
Click to collapse
I may not be of any help now because I have flashed Malaysk May rom a few days after I received my unit.
I hope we can help each other in the future.
I'm, also, trying to findout WHAT and WHO is MTCB-ZD9-V2.72 ??? Was expecting KGL-790 for a BMW E90.
Here was my Malaysk install comments: http://forum.xda-developers.com/showpost.php?p=67143277&postcount=4486
Thank you all
noise672 said:
I may not be of any help now because I have flashed Malaysk May rom a few days after I received my unit.
I hope we can help each other in the future.
I'm, also, trying to findout WHAT and WHO is MTCB-ZD9-V2.72 ??? Was expecting KGL-790 for a BMW E90.
Here was my Malaysk install comments: http://forum.xda-developers.com/showpost.php?p=67143277&postcount=4486
Thank you all
Click to expand...
Click to collapse
It doesnt matter that you have flashed Malaysk's ROM - I think hes talking about the buttons when he says "configuration" which is MCU controlled not Android. But you still cant help as its not possible to get a copy of the MCU software from a unit.
"ZD9" units have been appearing recently, we dont know the name of the company yet (we may never), but its not that important as long as copies of MCU updates become available, check Malaysk's MCU thread. None there yet.
Hi, I do not know where I have to post to see if they can help me
Mod Edit: Thread Closed By OP Request
litoalberto said:
Hi, I do not know where I have to post to see if they can help me
I buy a radio in aliexpress for seat 2 din 8 ".I don´t know the mark, is MTCD_HXD-v2.05 the wifi is not working and bluetooth not work, not linked, not connects not seeks,
Desperate because the seller does not solve me the problem. I have managed to enter recovery mode and reinstall the system in case it was damaged and still the same, I installed another new system but it turns out it is not HXD, it is mtcd_MX-v2.15_1 and the radio works but with the Same problems of wifi and bluetooth, I tried to install with recovery the MTCD_HXD_v2.05 but it does not leave me.
What can I do to fix the wifi and the bluetooth?
What can i do to get back to hxd?
Click to expand...
Click to collapse
Try to change the MCU version
Tamer amer said:
Try to change the MCU version
Click to expand...
Click to collapse
I tray to came back to original MCU but not possible. I dont know why.
litoalberto said:
I tray to came back to original MCU but not possible. I dont know why.
Click to expand...
Click to collapse
Try to change the MCU and then make MCU update
If it doesn't work so I don't have any other solution because I'm not expert
litoalberto said:
I tray to came back to original MCU but not possible. I dont know why.
Click to expand...
Click to collapse
Thank you but not run I search other MCU and try to install
smile.amazon.com/Standard-Android-Navigation-Bluetooth-Mirrorlink/dp/B01JULCTYE/ref=sr_1_3?ie=UTF8&qid=1504553078&sr=8-3&keywords=android+hizpo"]https://smile.amazon.com/Standard-Android-Navigation-Bluetooth-Mirrorlink/dp/B01JULCTYE/ref=sr_1_3?ie=UTF8&qid=1504553078&sr=8-3&keywords=android+hizpo
I searched on google and on this forum and maybe theres a simple reason i cant find much info about this unit.
what customizations can be done? is there custom software? Id like it so the weather shows when it starts up or something.
Im primarily using the bluetooth feature to play music but im having troubles with the sound quality. can I use a different amp software through bluetooth?
Im also planning to connect 1 or 2 amps to it. I see it has subwoofer control. anyone have any experience using a sub amp or a 4 channel amp with these android units?
I also cant get a 3g dongle to work when I have it connected. im sure its something im overlooking this is the one im using smile.amazon.com/Unlocked-Huawei-E397u-53-Worldwide-Required/dp/B01M0JY15V/ref=sr_1_2?s=electronics&ie=UTF8&qid=1504553313&sr=1-2&keywords=Unlocked+Modem+USB+4G+LTE+Huawei+%27"]Unlocked Modem USB 4G LTE Huawei E397u-53 Worldwide Hotspot Service Required Only T-mobile in US
more or less I want the best sound quality, total control of my amps and just to know what cool stuff you can do with these things. thanks!
Hi,I try all day to find MCU update and stock rom for MTDC-XRC 2GB ANDROID 7.1.2 but no lucky,is this MCU so unusual or what ??????
Please for everyone to try to help me?????
bisy said:
Hi,I try all day to find MCU update and stock rom for MTDC-XRC 2GB ANDROID 7.1.2 but no lucky,is this MCU so unusual or what ??????
Please for everyone to try to help me?????
Click to expand...
Click to collapse
That's the most recent one I coult find (2.66): https://forum.xda-developers.com/showpost.php?p=74833101&postcount=1057
kabelgleichung said:
That's the most recent one I coult find (2.66): https://forum.xda-developers.com/showpost.php?p=74833101&postcount=1057
Click to expand...
Click to collapse
Thanx wery much my friend !!!!
Only one question,do I must use file from (Yandex) or from (attached file) ????
Because this files have different extension and different size !!!!
File from "Yandex" is img.-213 kb. and file from "attached" is cfg.-525 bytes !
Thanx .
bisy said:
Thanx wery much my friend !!!!
Only one question,do I must use file from (Yandex) or from (attached file) ????
Because this files have different extension and different size !!!!
File from "Yandex" is img.-213 kb. and file from "attached" is cfg.-525 bytes !
Thanx .
Click to expand...
Click to collapse
Use the image-file from yandex.
For this MCU update,do we need only img.file or and cfg.file together copy in root folder ???
bisy said:
For this MCU update,do we need only img.file or and cfg.file together copy in root folder ???
Click to expand...
Click to collapse
You only need the image file.
P.S.: You '?' butten seems to be stuck!
kabelgleichung said:
P.S.: You '?' butten seems to be stuck!
Click to expand...
Click to collapse
I don't understood you,what do you think for that ????
I'm not sure if this is aloud or has been posted already but I'd just like to thank the kind gents at 4PDA for the file host and their site !
I dont know if this is indeed all files but here is a ton if anyone is looking :good::good:
MCU Files for all units are in the 2nd folder
https://yadi.sk/d/umCvHqCDzHccr
Hi, i have a px3 unit hzc brand 7.1 rom. Can i use any of these px3 7.1 roms.
Thanks alot for this!
Skickat från min ONEPLUS A3003 via Tapatalk
Cid6.7 said:
I'm not sure if this is aloud or has been posted already but I'd just like to thank the kind gents at 4PDA for the file host and their site !
I dont know if this is indeed all files but here is a ton if anyone is looking :good::good:
MCU Files for all units are in the 2nd folder
https://yadi.sk/d/umCvHqCDzHccr
Click to expand...
Click to collapse
Thank you for this. Can you please make folder listing or at least explain what this file from attached picture is for? It looks like Oreo Image but it is RAR instead of ZIP?
Thanks a lot man! but is there a way you can give me the "how-to" tutorial?
Can I use the latest GS mcu even if I dont have Android 8 on my GS device?
catu said:
Can I use the latest GS mcu even if I dont have Android 8 on my GS device?
Click to expand...
Click to collapse
Yes, MCUs are not processor or OS specific.
Thanks a lot for this, can anybody guide me how to figure out which one of these I need to install. My device mcu version says: 023042bGS-CIC-HW7-180516[B1280_170325].
I Guess it should be GS
cagdas said:
Thanks a lot for this, can anybody guide me how to figure out which one of these I need to install. My device mcu version says: 023042bGS-CIC-HW7-180516[B1280_170325].
I Guess it should be GS
Click to expand...
Click to collapse
If your MCU does not start wth "MTCD" or "MTCE" its not MTCD/E unit, try the Android Headunit general forum.
Thanks I found the right one finally but the hu says please wait and news starts the process.
cagdas said:
Thanks I found the right one finally but the hu says please wait and news starts the process.
Click to expand...
Click to collapse
Where did you find it ?
Hi I have a car radio Px3 (1024x600) android 7.1.2 with mcu mtcd chs Vs 2.56 july 2017 can I update it without risk with the file mtce chs v2, 75 June 2018?
g.mariano85 said:
Hi I have a car radio Px3 (1024x600) android 7.1.2 with mcu mtcd chs Vs 2.56 july 2017 can I update it without risk with the file mtce chs v2, 75 June 2018?
Click to expand...
Click to collapse
Can you share a link to the file ?
And post a screen shot of your MCU ? (it should b "v2.56" not "Vs 2.56").
typos1 said:
Can you share a link to the file ?
And post a screen shot of your MCU ? (it should b "v2.56" not "Vs 2.56").
Click to expand...
Click to collapse
HI this is the link and screen. Thanks
https://yadi.sk/d/umCvHqCDzHccr/All dmcu for PX3, PX5, Intel Sofia3g/CHS
g.mariano85 said:
HI this is the link and screen. Thanks
https://yadi.sk/d/umCvHqCDzHccr/All dmcu for PX3, PX5, Intel Sofia3g/CHS
Click to expand...
Click to collapse
As far as I know you can, but Sofia mdels have the wifi on the SoM, so the MCU may have some differences, do you have a copy of an older CHS MCU ?
typos1 said:
As far as I know you can, but Sofia mdels have the wifi on the SoM, so the MCU may have some differences, do you have a copy of an older CHS MCU ?
Click to expand...
Click to collapse
No, I'm sorry, I don't have any copies. I bought it from a friend. What do you think I risk? I would like to try to update it because I have problems with Bluetooth or do you think it can solve maybe changing roms? But even I wouldn't know where to start, which rom I could put and how. Thank you
g.mariano85 said:
No, I'm sorry, I don't have any copies. I bought it from a friend. What do you think I risk? I would like to try to update it because I have problems with Bluetooth or do you think it can solve maybe changing roms? But even I wouldn't know where to start, which rom I could put and how. Thank you
Click to expand...
Click to collapse
Usually all MTCD/E units use the same MCU and I was always under the impression Sofia units did too, but as I said they have wifi on the SoM which may make a difference as on other MTCD/E units the wifi is on the motherboard, so I m not 100% certain, also the link you posted has "Sofia MCU".
So I would read this thread starting at the beginning to find out for sure.
g.mariano85 said:
No, I'm sorry, I don't have any copies. I bought it from a friend. What do you think I risk? I would like to try to update it because I have problems with Bluetooth or do you think it can solve maybe changing roms? But even I wouldn't know where to start, which rom I could put and how. Thank you
Click to expand...
Click to collapse
Hi, did you succeed with any update? ROM or MCU?
I have a similar MCU CHS 2.51, BT frequently needs a complete 10s-Powerbutton reset to work....
Tx!
Hi, I also have your same problem with the bt. No I have not tried to update I am afraid of breaking everything not being so heady
Green Daddy said:
Hi, did you succeed with any update? ROM or MCU?
I have a similar MCU CHS 2.51, BT frequently needs a complete 10s-Powerbutton reset to work....
Tx!
Click to expand...
Click to collapse
You could try changing the MCU to a different one - see @marchnz's "Verified Cross Compatible MCUs" thread.
For Dasaita PX6
Updates on Dasaita website: https://www.dasaita.com/blogs/news/update-firmware
-----
Older versions:
Android 10:
HA3_rk3399_10.0_ota(20200915)升级包 : https://yadi.sk/d/ylg0cKBTQo4P1Q
HA3_rk3399_10.0_ota(20200724)升级包 : https://yadi.sk/d/AWDSmBsznvL3gQ
MCU images - unzip and copy "img" file to flash (sd/usb):
v3.57: View attachment MTCE_HA_V3.57.zip
v3.60: View attachment MTCE_HA_V3.60.zip
v3.62: View attachment MTCE_HA_V3.62.ZIP
DMCU - unzip and copy to flash (sd/usb) together with MCU image:
for 1280x720 units: View attachment dmcu-1280x720.zip - use it if you got a wrong resolution after flashing MCU image and you need to restore your unit to 1280x720 resolution
All works for me on Dasaita PX6 MAX10 (the unit came with Android 10 from the factory)
orik13 said:
For Dasaita PX6
Android 10:
HA3_rk3399_10.0_ota(20200915)升级包 : https://yadi.sk/d/ylg0cKBTQo4P1Q
HA3_rk3399_10.0_ota(20200724)升级包 : https://yadi.sk/d/AWDSmBsznvL3gQ
MCU images - unzip and copy "img" file to flash (sd/usb):
v3.57: View attachment 5111231
v3.60: View attachment 5111233
v3.62: View attachment 5111235
DMCU - unzip and copy to flash (sd/usb) together with MCU image:
for 1280x720 units: View attachment 5111237 - use it if your unit has 1280x720 resolution, otherwise you can get 1024x600 or lower instead (no worries in this case - just reprogram)
All works for me on Dasaita PX6 MAX10 (the unit came with Android 10 from the factory)
Click to expand...
Click to collapse
Before even considering this read in the other thread what happen to my unit. User name halloj,
orik13 said:
For Dasaita PX6
Android 10:
HA3_rk3399_10.0_ota(20200915)升级包 : https://yadi.sk/d/ylg0cKBTQo4P1Q
HA3_rk3399_10.0_ota(20200724)升级包 : https://yadi.sk/d/AWDSmBsznvL3gQ
MCU images - unzip and copy "img" file to flash (sd/usb):
v3.57: View attachment 5111231
v3.60: View attachment 5111233
v3.62: View attachment 5111235
DMCU - unzip and copy to flash (sd/usb) together with MCU image:
for 1280x720 units: View attachment 5111237 - use it if your unit has 1280x720 resolution, otherwise you can get 1024x600 or lower instead (no worries in this case - just reprogram)
All works for me on Dasaita PX6 MAX10 (the unit came with Android 10 from the factory)
Click to expand...
Click to collapse
Anyone reading this
*** Do not flash the DMCU.ext listed here together with the MCU ***
OP please edit this post, there is NO reason to flash dmcu.ext when flashing the same vendor MCU.
Suggest expanding on the comment "no worries just reprogram", with clear examples if making this statement.
marchnz said:
Anyone reading this
*** Do not flash the DMCU.ext listed here together with the MCU ***
OP please edit this post, there is NO reason to flash dmcu.ext when flashing the same vendor MCU.
Suggest expanding on the comment "no worries just reprogram", with clear examples if making this statement.
Click to expand...
Click to collapse
I edited it to make it more clear. Your comment is not absolutely correct: it is based on my own experience. Similar issues can be found by googling and even here at xda
Hi all I am a bit confused by how many different downloads please excuse me as a noob and first time flashing my PX6
My question is can I just jump from 3.5.8-1 to the latest 3.6.2 I believe and what files exactly do I need to load onto a flash drive.
Your help in advance is much appreciated. Cheers J
I am running a MTCE HA running 3.5.9
ToyotaJay said:
Hi all I am a bit confused by how many different downloads please excuse me as a noob and first time flashing my PX6
My question is can I just jump from 3.5.8-1 to the latest 3.6.2 I believe and what files exactly do I need to load onto a flash drive.
Your help in advance is much appreciated. Cheers J
I am running a MTCE HA running 3.5.9
Click to expand...
Click to collapse
Suggest NOT changing your MCU unless resolving a known issue. Same for Android. This is a head unit, constantly updating isn't necessary.
Update for mic issue
Hi Experts! If I want to update my Dasaita PX6 Max10 is there any preferred order which update to do first OTA or MCU? In case of OTA update at starting is it necessary to click on WIPE AND FORMAT FLASH option? Somebody is doing this, somebody is doing that... When is it suggested?
The reason why I planning to switch to latest update because during calls my mic is working strange, sometimes the others cannot hear me properly. They are complaining about low volume and faded voice. (If they are calling back they says it is better...) Have you experienced the same thing?
halloj said:
Before even considering this read in the other thread what happen to my unit. User name halloj,
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=83671635&postcount=3655
gomoriz said:
Hi Experts! If I want to update my Dasaita PX6 Max10 is there any preferred order which update to do first OTA or MCU? In case of OTA update at starting is it necessary to click on WIPE AND FORMAT FLASH option? Somebody is doing this, somebody is doing that... When is it suggested?
The reason why I planning to switch to latest update because during calls my mic is working strange, sometimes the others cannot hear me properly. They are complaining about low volume and faded voice. (If they are calling back they says it is better...) Have you experienced the same thing?
Click to expand...
Click to collapse
Are you sure it is not a h/w issue? Did you try other mic?
orik13 said:
Are you sure it is not a h/w issue? Did you try other mic?
Click to expand...
Click to collapse
I use the internal microphone, not yet tried an external one. I checked the mic with apps, basically it is working however its volume seems to be a little bit low, but it is not faded. I feel it is rather a noise suppression issue (coming from sw side), therefore I hope that an update could help.
orik13 said:
I edited it to make it more clear. Your comment is not absolutely correct: it is based on my own experience. Similar issues can be found by googling and even here at xda
Click to expand...
Click to collapse
I respectfully disagree based on years of experience: there's no need to flash the MCU configuration file DMCU with an MCU that matches the manufacturer of your head unit. I.e. HA to HA, JY to JY etc.
Your well meaning advice resulted in a configuration not appropriate (which messed up the screen) for another members screen type/resolution.
The 'similar issues' stated are probably your misunderstanding of what the DMCU file is and possibly where others have installed a different vendor MCU. E.g. GS on HLA
Hello, with dasaita px6 android 10 1024/600 firmware HA3, the update "HA3_rk3399_10.0_ota (20200915) 升级 包" and MCU "MTCE_HA_V3.62": all is ok , thank you
A few questions...
1) Anybody able to modify steering wheel controls? I open the app and it is blank.
2) Also, can you summon siri/google via the steering wheel when in carplay/android auto?
3) I have an OBD dongle but am unable to get the headunit to connect to it. I see it in the available devices but nothing happens after i select "yes" to connect.
I have the max10 600p resolution version for highlander. A canbus was included and I am able to change vol/toggle modes.
h0va4life said:
A few questions...
1) Anybody able to modify steering wheel controls? I open the app and it is blank.
2) Also, can you summon siri/google via the steering wheel when in carplay/android auto?
3) I have an OBD dongle but am unable to get the headunit to connect to it. I see it in the available devices but nothing happens after i select "yes" to connect.
I have the max10 600p resolution version for highlander. A canbus was included and I am able to change vol/toggle modes.
Click to expand...
Click to collapse
When you install a harness with a CAN adapter the steering wheel signals a routed for you to the CAN decoder box. It worked for me to reroute them to my own circuit. It should be equally fine to connect them to the KEY1 and KEY2 inputs, that is if your car has resistive buttons and only one or two. Then you can program them as desired.
Flashed 20200915 and the 2.62_1 (with a different dmcu.ext provided by dasaita that had screen:18 inside it). Everything has been working great but there is an annoying notification everytime I switch the car on that shows the version number - is there anyway to get rid of this?
woggles said:
Flashed 20200915 and the 2.62_1 (with a different dmcu.ext provided by dasaita that had screen:18 inside it). Everything has been working great but there is an annoying notification everytime I switch the car on that shows the version number - is there anyway to get rid of this?
Click to expand...
Click to collapse
I noticed that the first time I installed that update, then I went back to the prior version I had, one more time I gave it a try and I started to try to remove that annoying notification, but then I thought why waste time on that, also I notice that saving a screenshot was giving me an error, so once again I went back to the prior version I had installed.
I can’t decide whether to put this up or Malayk’s ROM. I don't really need pre-installed programs, I know which launcher, music player, etc.. I want to use, but there may be settings in it that I can't solve on this ROM.
woggles said:
Flashed 20200915 and the 2.62_1 (with a different dmcu.ext provided by dasaita that had screen:18 inside it). Everything has been working great but there is an annoying notification everytime I switch the car on that shows the version number - is there anyway to get rid of this?
Click to expand...
Click to collapse
Try
https://forum.xda-developers.com/showpost.php?p=83767241&postcount=3694
bad for me
thienthanty said:
Try
https://forum.xda-developers.com/showpost.php?p=83767241&postcount=3694
Click to expand...
Click to collapse
hello, with this firmware "HA3_rk3399_10.0_ota (20201016) 升级 包", I can no longer make a call with "google voice".
thienthanty said:
Try
https://forum.xda-developers.com/showpost.php?p=83767241&postcount=3694
Click to expand...
Click to collapse
Thanks, the annoying pop up is gone but as another use mentioned using call x from Google Assistant doesn't work anymore!