The fingerprint option on my zenfone 5Z is not getting enabled suddenly. It was working fine suddenly it stopped...
Rgrajendran said:
The fingerprint option on my zenfone 5Z is not getting enabled suddenly. It was working fine suddenly it stopped...
Click to expand...
Click to collapse
I have same problem
Even fingerprint option not showing in lock screen setting
Related
It dosent seem to want to go to the lock screen after charging it i have CM 12.1
My tap to wake and lift to wake are not working. I tested the accelerometer and gyroscope and both are working ok. Screen rotation is working too. Does anyone have these issues?
Try lock screen immediately
By going setting/security & location/screen lock setting/automatic lock to immediately.
Android 7?1 on Pixel XL had tap to wake and lift to wake.
Android 8.0 removed all that. Doesn't exist on Pixel 2 XL.
Icyou said:
Try lock screen immediately
By going setting/security & location/screen lock setting/automatic lock to immediately.
Click to expand...
Click to collapse
I tried the screen lock immediately.. Didn't work.
Already factory reset too
nxt said:
Android 7?1 on Pixel XL had tap to wake and lift to wake.
Android 8.0 removed all that. Doesn't exist on Pixel 2 XL.
Click to expand...
Click to collapse
Sorry, not tap to wake.
It's called double tap to check and lift to check. Even twisting the phone to switch between the front and camera is not working....
ultrastranger said:
Sorry, not tap to wake.
It's called double tap to check and lift to check. Even twisting the phone to switch between the front and camera is not working....
Click to expand...
Click to collapse
just stating for the record, they all work fine in 8.1
hmmm.. so these features are not working on 8.0 for pixel 2 xl? Im just concerned whether its a hardware or software issue.
Do these features work for you guys?
The double tap and lift to check (grayed out) phone options are in ambient display settings. Double tap works, lift does not, 8.1.
ultrastranger said:
Sorry, not tap to wake.
It's called double tap to check and lift to check. Even twisting the phone to switch between the front and camera is not working....
Click to expand...
Click to collapse
Go to Settings, type Double at the top, you should see three settings for the various wake and camera flip. Make sure they're on.
Personally Lift to wake o haven't seen it work on my 2 XL. I'm pretty sure it's been removed.
My double tap n lift are both working fine on 8.0, and my hardware rev is 10 on penguin/panda
Both are working for me, 8.0. Maybe a factory reset will work?
Sent from my Pixel 2 XL using XDA-Developers Legacy app
Both work fine here on 8.0
Sent from my Pixel 2 XL using Tapatalk
Ditto, both working fine on 8.0 for weeks...
Lift to wake only works if always on display is off.
https://tunecomp.net/disable-raise-to-wake-lift-to-check-google-pixel/
I have a Pixel 2 XL and double tap to wake, ambient display, wake on receiving notifications and the camera flip gesture, are all not working on my device. Those options are all selected, and I have tried safe mode as well as a factory reset to no prevail. Google's response was to send a replacement however all of the hardware is confirmed as operational. This all occurred after a software update.
Double tap is inactive and does not work. It is selected as on.
Ambient display is on, screen is locked after 5 seconds, however the ambient display turns off after 10 seconds of inactivity.
Wake for notifications, does not wake the screen.
Flip for selfie camera does not work no matter which way I hold the phone.
Android 8.0.0
Same here, pixel 2 XL double tap to wake completely unresponsive. On 8.1 and factory reset.
I have enabled double tap to show ambient display for time and notification and i updated to 8. 1 manually no wipe or reset and that is working normal as on 8.0
Cheers ?
Sent from my Google Pixel 2 XL using XDA Labs
Hey guys
I noticed all these problems after the update to 8.1.
it seems like Google somehow messed up the proximity sensor, that's why ambient screen is turning off and you can't use double tap to wake.
there are several threads to this but nobody really has a fix.
https://forum.xda-developers.com/pixel-2-xl/help/8-1-update-broke-proximity-sensor-t3718659
for some people the problem was solved after removing their screen protector. But I don't have a screen protector so..
I hope Google is aware of this.
Hey..i found the problem
I had the same issue. the following fixed it.
Settings -> Security -> Smart lock -> Disable all.
Smart lock kept my phone unlocked at home.
After i disabled trusted places....the double tap works just fine. The Flip camera works too after i disabled smart lock.
I hope this works for you too.
Hi,
my Redmi Note 8 Pro shows problems when starting a phone call.
The display gets dark and cannot be reactivated without restarting the device.
I suppose the proximity sensor is not working properly, so I would like to disable it to confirm my idea.
But if I try to find settings for incoming or outgoing calls in the phone app there is nothing similar.
Does anyone have a hint for me ?
Thanks and best regards,
Erwin
Hi,
same problem here with Redmi Note 8.
I also tried PixelExperience ROM but same behaviour.
Sensor calibration in CIT can't be done because "Calibration" and "Test" buttons are greyed out.
"Proximity sensor test" app says that the sensor is always sensing something even if not covered by anything.
Are there any other possible fixes or is this a hardware defect?
only the fingerprint sensor big is fixed for me but its not available on screen off only can be used when screen in on
thearorahimanshu said:
only the fingerprint sensor big is fixed for me but its not available on screen off only can be used when screen in on
Click to expand...
Click to collapse
Coming from pie to Android 10 I can use it with the screen off
Baron60 said:
Coming from pie to Android 10 I can use it with the screen off
Click to expand...
Click to collapse
is there "4" written next to wifi in status bar and notification Toggle ?
thearorahimanshu said:
is there "4" written next to wifi in status bar and notification Toggle ?
Click to expand...
Click to collapse
Yes.. it shows you if you're on 2.4 or 5 ghz
thearorahimanshu said:
is there "4" written next to wifi in status bar and notification Toggle ?
Click to expand...
Click to collapse
It means that you are connected to a 2.4GHz WiFi network.
When you connect to a 5GHz Wifi, the "4" changes to "5".
ok so what about hotspot's "5" ?
thearorahimanshu said:
only the fingerprint sensor big is fixed for me but its not available on screen off only can be used when screen in on
Click to expand...
Click to collapse
android 9 ?
Nothing has been fixed basically
Pretty underwhelming
Fingerprint Issue is fixed.
thearorahimanshu said:
only the fingerprint sensor big is fixed for me but its not available on screen off only can be used when screen in on
Click to expand...
Click to collapse
As it was in Pie, fingerprint is back to normal.
1. Fingerprint appears even when screen is off.
2. No difference in speed.
imarchit19 said:
As it was in Pie, fingerprint is back to normal.
1. Fingerprint appears even when screen is off.
2. No difference in speed.
Click to expand...
Click to collapse
what do you mean at point 1? Has option to dont show when you move phone, that means only when you put your finger to unlock it shows.
you are so confusing.
Settings > display > advanced > lock screen display > new notifications (turn this on) by turning this on fingerprint scanner in screen off is working for me... try it
L1p1c1 said:
what do you mean at point 1? Has option to dont show when you move phone, that means only when you put your finger to unlock it shows.
you are so confusing.
Click to expand...
Click to collapse
Sorry if I sounded confusing.
What I meant by Point 1 was that despite the update and fingerprint working.
Many of my peers said the option to show fingerprint location on lockscreen wasn't working.
In my case fingerprint appeared both when my screen was on and off.
thearorahimanshu said:
Settings > display > advanced > lock screen display > new notifications (turn this on) by turning this on fingerprint scanner in screen off is working for me... try it
Click to expand...
Click to collapse
I love you buddy
I've received today March security patch in Android 9.
Size: 93.7MB
eu
Bugs
I'm still bothered by the fact that I can't change media volume when the screen is locked.
Is the proximity sensor fixed yet? I keep accidentally triggerrimg flashlight and DND mode.
Also I don't think I'll ever get the A10 update. They're so slow. This might be the last xiaomi A1 phone I buy. Or any xiaomi phone. Where to report bugs?
This is an joke
LeAntsy said:
I'm still bothered by the fact that I can't change media volume when the screen is locked.
Is the proximity sensor fixed yet? I keep accidentally triggerrimg flashlight and DND mode.
Also I don't think I'll ever get the A10 update. They're so slow. This might be the last xiaomi A1 phone I buy. Or any xiaomi phone. Where to report bugs?
Click to expand...
Click to collapse
To change the media volume with locked screen, it must be turned off - disable showing fingerprint icon and it'll work just fine. I'm using it since I bought the phone.
Proximity sensor works fine, you just need to "learn" how to use the phone - when calling, put it against your ear at angle with the top edge first, this will trigger the proximity sensor. Then push it against your ear.
To report bugs, use Feedback app from system settings.
Other phones do not need any special usage procedures, proximity sensor just works, but in A3 it is screwed.
Got this today
Hi
I have a proximity sensor issue. Firstly, there is no longer an option to turn off the proximity sensor in the Phone app setting>incoming call setting page. According to online posts this is the way to overcome the blacked out screen during a voice call. Also tried doing the proximity sensor test under CIT but the phone does not initiate any test.
Does anyone have the same issue and ways to overcome it?
Thanks
Rod
My wife's Ginkgo (Note 8), too... :crying:
Seems that latest MIUI Global 11.0.9.0 solved the proximity sensor issue.