Related
[Mi5][KERNEL][HMP/MIUI][Linux 3.18.31] Floppy Kernel [RC1.3][13/01/18]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Floppy is kernel for all custom rom based on LineageOS 14.1, 15.1 and Miui , support the Xiaomi Mi5
Code:
#include <disclaimer.h>
* Your warranty is now void. *
* No guaranteed this'll explode your device, be careful, follow the instructions ! *
*don't point at me if your alarm dies after flashing this kernel ! *
Based on Linux Kernel 3.18.31
Based on LineageOS Kernel
GCC Linaro 7.2.1, UBERTC 8.0, SaberMod 7.0 and Google 4.9
Governors: Impulse, Despair, Zzmove, Darkness, Blu_active, ElementalX, Interactive, Conservative, Ondemand, Powersave, Lionheart, Userspace, Bioshock, Alucard, Hyper, Wheatley, Nightmare, Dancedance, Adaptive, Pegasusq, Chill, Cafactive and Performance.
I/O Schedulers: Noop, Deadline, Cfq, Fiops, Bfq, Zen, Sio, Sioplus, Maple and Tripndroid.
Compiled with -Os
Full Linaro Optimizations ON
Optimized Parameters from L Speed @Paget96
Standard MSM8996 Frequency CPU | GPU for all variants - credits : whyorean
Overclock CPU Big core at 2265Mhz and Little core at 1728Mhz
Google Snappy Algorithm
ARM RWSEM Algorithm
Charge Control module - credits : xNombre
Wireless adapter (LIB80211, RTL8180, RTL8187, MAC80211, EEPROM: LEGACY, MAX6875, 93CX6, 93XX46)
Spectrum support
Kexec HardBoot support
Wireguard
Kernel Samepage Merging (KSM)
Dynamic File Sync and Asynchronous FIle Sync - credits : andip71 | Francisco Franco
Passing SafetyNet
[*] Frandom - Entropy Generator
USB OTG NTFS r/w Support
SYSInterface Gentle Fair Sleepers
[*] Some CFLAGS optimizations
Performance enhancements
OC Slimbus frequencies to provide better sound quality
Lazyplug - credits : arter97 | frap129
Backlight Dimmer
Arch Power saving - credits : kirananto | Cl3Kener
Adreno Idler- credits : arter97 | yarpiin
[*] Intelli-Thermal v3.0 - credits : faux123
Sound Control - credits : flar2 | me
Support f2fs, exfat, ntfs filesystem
Quick WakeUp Driver and power suspend 1.7 - credits : Paul Reioux | Jean-Pierre Rasquin | Francisco Franco
Support cpu boost, cpu input boost and fingerprint boost
MDSS color control (Kcal v2) - credits : flar2 | andip71
Sysfs interface to Enable/Disable CRC - credits : whyorean
[*] Sysfs interface CPU Vdd levels
Boeffla wl blocker v1.1.0: sensor_ind, msm_hsic_host, wlan_rx, wlan_ctrl, wlan, ipa, qcom rx and more - credits : Francisco Franco | andip71
Vibration Control Intensity
TCP Congestion Algorithms: Westwood (default), Reno, Bic, Highspeed, Hybla, HTCP, Vegas, Scalable, Lp, Yeah and Illinois.
And much more!
First time:
Reboot to recovery
Flash FloppyKernel.zip
Flash magisk (optional to get root)
Wipe cache e dalvik cache
Reboot
Update the kernel:
Reboot to recovery
Flash FloppyKernel.zip
Wipe cache e dalvik cache
Reboot
Coming from another kernel:
Reboot to recovery
Flash your ROM
Flash FloppyKernel.zip
Flash magisk (optional to get root)
Wipe cache e dalvik cache
Reboot
Floppykernel
FloppyKernel's Autonomous Builds
FloppyTeam
FloppyReleases
Donate here, if you like my work!!!
LineageOS
Mi5Devs
@GreekDragon
XDA:DevDB Information
FloppyKernel, Kernel for the Xiaomi Mi 5
Contributors
Jonas Cardoso, InsideMuz
Source Code: https://github.com/JonasCardoso/android_kernel_xiaomi_msm8996
Kernel Special Features: A magical support, I am all day here, reading the publications of the posts, ready to help in any doubt (unless you have not read the OP that contains the information that you need).
Version Information
Status: Stable
Current Stable Version: RC1.3
Stable Release Date: 2018-01-13
Created 2017-11-29
Last Updated 2018-08-20
RC1 - 28/11/2017
Changes from source "LineageOS/android_kernel_xiaomi_msm8996"
kernel: support for GCC 5, 6 and 7
cpufreq: added new governor
block: added new iosched
filesystem: add NTFS r/w support
power : power_suspend 1.7 - credits : Paul Reioux | Jean-Pierre Rasquin
sched: Add SysInterface for GENTLE_FAIR_SLEEPERS
int_sqrt: Improve 3x faster integer sqrt
sync: Dynamic Sync Control 2.0
fs: Async I/O latency to a ssd greatly increased, 34% gain (Creds: kl…
include: Set 1024KB as Max Read ahead - more performance now
thermal : intelli-Thermal v3.0
ASoC: wcd9335: Sound control
msm8996: all variants same clock
staging: Google Snappy
Power : Add Quick WakeUp Driver
cmdline: Safetynet
fs: add exfat support
cpufreq: show cpu voltages via sysfs 009a6c0
cpufreq: Add CPU Input Boost Driver : SultanXDA
cpufreq: cpu-boost: Optimizations
fs: Dynamic Sync Control 2.0 and MDSS color control
drivers: Slimbus Overclock
gemini: Enable All TCP Congestion Algorithms
OC : Standard MSM8996 Frequency CPU | GPU
devfreq : Add Adreno Idler
cpufreq: add fingerprintboost and lazyplug
drivers: intelli-Thermal v3.0
version: floppykernel RC1
RC1.1 - 10/12/2017
SoundControl: fixed speaker \o/
ramdisk: add tweaks on init.floppy.rc
char: disabled frandom
gemini: enabled ksm
gcc: support gcc 7.x and 8.0 (Linaro and UBERTC)
zip-creator: add spectrum support
drivers: misc: implement usb fast charge mode
version: floppykernel RC1.1 62e569c
zip-creator: delete zip build 8ae3d63
RC1.2 - 27/12/2017
android: binder
ALSA: compress: Add DSD format support for ALSA
ALSA: compress: Add APTX format support in ALSA
firmware: Update synaptic
firmware: Update fte8716
spectrum: don't change clock cpu
kernel: added support to lithium
kernel: added support to natrium
kernel: added support to scorpio
msm8996: Overclocking frequencies
msm: qdsp6v2: Allow 320K AAC encoding
Add Kexec HardBoot Support
Revert "drivers: intelli-Thermal v3.0"
Merge tag 'LA.UM.5.5.r1-06400-8x96.0' into HEAD
drivers: staging: Update qcacld-2.0 driver
version: floppykernel rc1.2
build.sh: update device.prop
defconfig: CPU and GPU more battery-friendly
wakeup: More Wakelocks
RC1.3 - 13/01/2018
zip-creator: update AnyKernel2
build.sh: update device.prop
defconfig: CPU and GPU more battery-friendly
zip-creator: update AnyKernel Setup
wakeup: More Wakelocks
msm: mdss: kcal: Add KCAL support for post processing control [v2] 6b40a22
zram: LZ4 after LZ0
block: Add Maple I/O Scheduler
zip-creator: Patch to remove dm-verity
gcc8: fix warnings
defconfig: Wireless Adapter
net/wireguard: add wireguard importer
zip-creator: device check
dtbTool: now dtbTool will be built
travis: GitHub Release
zip-creator: update patchs
boeffla_wl_blocker: update to wakelock blocker driver v1.1.0 3efdcbf
defconfig: enable lazyplug a9785fe
defconfig: enable adreno idler a5d0558
cpufreq : Add Chill CPU Governor - credits : Joe Maples (@frap129) 6d26826
cpufreq: Add CAF-Active Governer - credits : Jean-Pierre Rasquin 4ba764b
version: floppykernel rc1.3 34479b6
travis: deploy in lineage-14.1 branch e5f4308
Frequently asked questions
Q: Will this conflict with any mod I'm using?
A: As long as it doesn't have any entropy related stuff, its okay. Since the kernel already comes with an inbuilt entropy generator, it will conflict with the ones from mod, causing a poor, stuttered performance!
Q: Deep Sleep isnt working for me, Google Services causing wake-locks, what to do?
A: Go to settings, Privacy, Privacy Guard, All apps, long press Google Services, and deny/disable wake-locks! (Thanks to @Paget96 for the solution)
Q: Which version should I flash?
A: Flash kernel with toolchain that you prefer.
Q: What is the difference between the UBERTC, Linaro, SaberMod and Google toolchain? Which one is the best?
A: It's a good read on the toolchain UBERTC you are wanting to know more about it, this for Linaro, this for SaberMod and this for Google.
Q: What is the difference between the HMP and Miui kernel?
A: Miui folder is for miui roms -> xiaomi.eu, MiuiBR and other derivatives from miui official. HMP folder is for aosp rom and derivatives -> Aosp, Lineage and other derivatives from aosp
Q: Is your kernel secure?
A: You MAY face some issues, but it's safe! My cell phone has not exploded yet.
Q: WiFi doesnt work for me.
A: Reflash ROM and Kernel.
Q: All variants of the Xiaomi Mi5 have the same CPU and GPU clock?
A: Yeeh.
Q: I have problems with the sound control of the speaker and microphone
A: Yeeh, I have too, bugs today, bugs tomorrow, bugs forever.
Q: What application can I use to configure the kernel?
A: Use Spectrum, and if you have enough knowledge of what to modify or do in the application use together Kernel Adiutor.
Q: Can I use the kernel source in my ROM?
A: If you want to use my kernel in your ROM, just put my name in the credit, just like I did.
Q: Does your kernel support writing to the NTFS file system?
A: Yeeh, you can use flash drives and HD with NTFS via OTG.
Q: My cpu clock is locked in 1190Mhz with any governor.
A: Just disable the thermal control in the kernel temperature settings.
Q: I have problems with your kernel.
A: Take a logcat and kmesg, this website and this video should help you
Q: Why does my magisk and root disappear after installing your kernel?
A: The kernel script makes changes that directly interfere with both, reinstall the magisk that it will function normally, follow this installation line always: FloppyKernel -> Magisk -> Reboot system.
Q: Does your kernel support Miui ROM?
A: Yes, support was added in "RC1.1".
Q: What is the "Battery" profile in the spectrum?
A: Based on Project Zhana & X.A.N.A was made for trying to be as efficient as possible without compromising the performance. Thanks to the discovery on Voltages used by our SD820 I could make a profile that utilizes more the BIG cluster. My first attempt was to move ALL the load to the BIG cluster, it was against anything that I have learned about little. BIG CPU but I tried, it turned really good at first, low usage was just amazing... But on more usage things didn't go that good. So what I did it was to give a twist to things, but not such twist. It kind of works like Nameless and Shotgun, Mostafa Wael and I worked the same idea. #LITTLE cluster will be running on low-mid frequencies but delivers full performance when is needed. # BIG Cluster will help LITTLE ease Load, but in a great way than before. Things can be done faster and more efficient giving us profit in form of battery. It should run smooth on all scenarios, but you guys tell me. You can easily get around 7~9 hours SOT for 24 hours even more If you don't play game. This will, of course, may vary, but it will definitely be better.
Q: What is the "Balanced" profile in the spectrum?
A: Based on GhostPepper was made to uses a quantized, frequency-aligned parametric curve to influence low core clock rates while providing extremely smooth transitions from each clock rate and exceptional battery life. Really well-defined clock speed escalation for a good battery and performance.
Q: What is the "Performance" profile in the spectrum?
A: Based on FusionP this profile brings a more "agressive" way to scale frequencies. It will scale frequencies sooner(regarding load values from cpu) and will use more the big cluster to provide more performance doing the tasks on hands. Battery should not take a big hit but using heavy demanding tasks you can expect a higher drain.
Q: What is the "Gaming" profile in the spectrum?
A: Based on Burnout PR5, this profile's main goal is to provide absolute maximum performance when needed, but lies low quite well. You see, some times I see the CPU hitting some of the high freqs of 1190 while making something as simple as watching YouTube or playing some spotify tracks needlessly, and sometimes I feel it is a bit slower than it should be in things like brute multitasking. Most profiles do aim at bringing a mid-ground to rest on. But with the sensible words of one of my favourite idols Jeremy Clarkson, he says 'Power solves everything' and right he is. By eliminating the mid freqs of the Little cluster and efficiently using some specific frequency steps, you get some power savings by staying on lower freqs as much as possible, and even on brutal tasks you get the job done faster as well, since the CPU will give you all the power to finish the job as fast as it can, and hit back to idle faster.
Q: I want more information about your spectrum profiles.
A: Read this thread.
Q: I want more information about governors, I/O Scheduler, Hotplug, TCP Algorithms and other things.
A: Read this thread.
Thx to @musabcel
Antutu Benchmark
Geekbench
It seems a very nice kernel, big up for the dev, Im hoping that this kernel will be updated for Oreo?
Francesco0301 said:
It seems a very nice kernel, big up for the dev, Im hoping that this kernel will be updated for Oreo
Click to expand...
Click to collapse
I'm just waiting for the Oreo ROMs become more stable
Im following you from your L7 development times. And i have l7 and mi5. Now im using jdc oreo but i will install LOS for try your work. I hope you will continue your work for oreo.
Wich is better, Linaro Or UBERTC?
What's the difference between linaro and ubertc?
hi.. I'm was installed Linero version for my Mi5pro. i have questions.
- why my model phone goes to Samsung Galaxy Note 7.
- my magisk root gone, after intalled these kernel version.
Thanks.
roomraditz said:
hi.. I'm was installed Linero version for my Mi5pro. i have questions.
- why my model phone goes to Samsung Galaxy Note 7.
- my magisk root gone, after intalled these kernel version.
Thanks.
Click to expand...
Click to collapse
First question: idk, my model phone is normal, Mi5, try install boot.img and after kernel, are you using any modifications ?
Second question: normal, after install kernel magisk gone, you have to install again, because in the installation it is lost
Good to see new kernel ?? will flash and try
miui support ?
Linaro or UBERTC?
I use the version with Linaro and I am very satisfied, I recommend that you test both versions and see which one is best for you
gunnered14 said:
miui support ?
Click to expand...
Click to collapse
No, dont try flash this, is only for aosp, LOS and its variants
Jonas Cardoso said:
First question: idk, my model phone is normal, Mi5, try install boot.img and after kernel, are you using any modifications ?
Second question: normal, after install kernel magisk gone, you have to install again, because in the installation it is lost
Click to expand...
Click to collapse
thank you, that problem solved. and can you explain difference Liberio and Ubertcc.. ?.
thank you so much for this kernel. Smooth and good battery
hope you keep dev this kernel
roomraditz said:
thank you, that problem solved. and can you explain difference Liberio and Ubertcc.. ?.
Click to expand...
Click to collapse
Here
i'm use u'r kernel since this thread open.
I use ubertc version, it's very smooth.. but sometimes my device freeze, but no problem at all coz the true culprit is magisk magic charging module..
but just now im trying linaro build.. i hope no problem like ubertc build..
Im suggesting fast charging module bro like dragonxia 3.8 OC..
Don't work with Miui rom ?
Envoyé de mon MI 5 en utilisant Tapatalk
[KERNEL][OC/UC/UV] ꓘⓄ - 4.7.1 [DragonTC 8.0 + Linaro 7.3][.147 + 6.2.r1-10500][EOL]
ꓘⓄ KernelEOL NO MORE UPDATES (exams) FLASH ANY OTHER KERNEL
Telegram DISCUSSION & TESTING GROUP
General Improvements:
Built with DragonTC 8.0 and Linaro 7.3 gcc
Always up to date with Linux stable and latest CAF tag
CPU & GPU Improvements:
Overclocked Big cluster to 2.3Ghz and Little to 1.9Ghz
Underclocked Big and little to 300mhz
Undervolted and voltages adjusted
Several CPU Governors available - Chill, Alucard, Nightmare, Ironactive, Cultivation, Impulse, ZZMoove big.LITTLE Edition, Blu active, Tripndroid, Cafactive
Adreno Idler and Adrenoboost available
Network improvements:
Implemented Wireguard VPN support usable with Azire VPN
Enhanced TCP methods - cubic, westwood, vegas, scalable, CHINA, Agile-SD, many more
I/O improvements:
Several I/O control tweaks
Added schedulers - Maple, Zen, Vr, Tripndroid, Sioplus, SIO, FIOPS, Fifo
Adaptive LMK
Added UKSM
Dynamic FileSync toggle
Disabled I/O CRC check for more performance
Screen Improvements:
sRGB and KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
Backlight dimmer for lower minimum brightness
Battery improvements:
USB Fast Charge
Boeffla Wakelock blocker available
Miscellaneous improvements:
Vibrator Strength tunable
Added Nav Bar gesture
Much more, refer git
DOWNLOADS
XDA:DevDB Information
ꓘⓄ Kernel, Kernel for the Asus ZenFone Max Pro M1
Contributors
Sudeep Duhoon
Source Code: https://github.com/SudeepDuhoon/KO.git
Kernel Special Features: Always up to date with linux stable and caf sources, feature rich and stable
Version Information
Status: Stable
Created 2018-07-18
Last Updated 2018-08-16
ChangeLogs :-
v4.7
nu time to update changelogs sry
flash and feel the difference
v4.0
Check github
v2.5
Merged .141 & .142
Merged LA.UM.6.2.r2-04700
Permissive denials logging disabled
Enable core control
Adrenoboost:conservative governor
Allow 320K AAC encoding
Powersuspend PM kernel driver
Gentle fair sleepers disabled by default
State notifier updates and switch removed
TCP congestion algorithm: CHINA & Agile-SD
Governor: Cafactive
Slow charging fix? (test)
Lot more under the hood changes and improvements
v2-
1. Merged .141
2. CPU governors added:-
Chill
Interactive (additions)
Add Support to Display State
Add powersave bias tunable
Add screen off max frequency tunable
3. Fixed min frequency of Little cluster stuck at 1536
4. CRC Check toggle
5. Added KSM, UKSM
6. Added Nav Bar gesture
7. Added Simple GPU Algorithm.
8. Added CAKE packet scheduler
9. Disabled adreno idler by default
10. LZ4 compressor updates
11. O3 Optimizations
12. Turned off Core Control Hotplug and Performance Hotplug (testing)
13. Updated anykernel2
v1-
1. Merged .140
2. Latest CAF Tag
3. CPU governors:-
alucard, nightmare, ironactive, cultivation, impulse, ZZMoove big.LITTLE Edition, blu active, tripndroid.
4. I/O Scheduler:-
Maple, zen, vr, tripndroid, sioplus, SIO, FIOPS, fifo.
5. TCP congestion algorithms:-
cubic, westwood, vegas, scalable.
6. CRC Check disabled (toggle from next build)
7. State Notifier (enabled by default)
8. WakeLock Toggles
9. KCAL Control
10. Arch Power
11. Arch Capacity
12. Gentle Fair Sleepers
13. Powersuspend
14. Enable FP Boost (testing needed)
15. Adreno Idler
16. Adreno Boost
17. CPU Wake Boost
18. Wireguard Support
19. Boeffla WakeLock Blocker
20. Fsync on/off support
21. USB fast charge
22. MSM Preserve Memory
23. File System Improvements
24. Better Decompression Performance
this kernel works only custom or both stock and customrom ?
savijaysalem said:
this kernel works only custom or both stock and customrom ?
Click to expand...
Click to collapse
both
Sudeep Duhoon said:
both
Click to expand...
Click to collapse
does/would usb otg work after flashing this? see my post here. thanks for any help.
This kernel has increased my mobile's memory management score on DOT OS
Steps to flash !!
anandushari said:
Steps to flash !!
Click to expand...
Click to collapse
Download kernel zip ,flash in recovery , wipe cache/dalvik(not compulsory) , reboot
james11705 said:
Download kernel zip ,flash in recovery , wipe cache/dalvik(not compulsory) , reboot
Click to expand...
Click to collapse
do root is required or not
anandushari said:
do root is required or not
Click to expand...
Click to collapse
No , but u need to unlock ur bootloader and flash a custom recovery like twrp or red Wolf , before flashing this zip.
I do not understand half of the things listed in the improvements. However, something caught my attention: USB Fast Charge. Does this means the phone will support fast charging once this kernel is flashed?
After installing. My phone is asking to format sd card and shows currpted. Rebooted and clear dalvik cache same error back to stock kernel. Using stock rom 316
Update 2.5
Merged .141 & .142
Merged LA.UM.6.2.r2-04700
Permissive denials logging disabled
Enable core control
Adrenoboost:conservative governor
Allow 320K AAC encoding
Powersuspend PM kernel driver
Gentle fair sleepers disabled by default
State notifier updates and switch removed
TCP congestion algorithm: CHINA & Agile-SD
Governor: Cafactive
Slow charging fix? (test)
Lot more under the hood changes and improvements
Aftab_khatri said:
After installing. My phone is asking to format sd card and shows currpted. Rebooted and clear dalvik cache same error back to stock kernel. Using stock rom 316
Click to expand...
Click to collapse
send boot time log
don't wipe anything, just reboot
are you using xposed module?
abubin said:
I do not understand half of the things listed in the improvements. However, something caught my attention: USB Fast Charge. Does this means the phone will support fast charging once this kernel is flashed?
Click to expand...
Click to collapse
through USB 3 port, yes
Dumb question.
How should I use boeffla wake lock blocker
Dt2w support?
Sent from my G5 SE using XDA Labs
Sudeep Duhoon said:
send boot time log
don't wipe anything, just reboot
are you using xposed module?
Click to expand...
Click to collapse
How to take log ? And no i don't use xpose its battery hog and makes.device laggy
Is it possible that we get WiFi 5ghz band as the SoC supports it? And also what about Qualcomm quick charge?
How fast does it charge? 3000mA at 4V? Or even more?
Welcome to The HeliosPro Kernel Thread for Galaxy J7 2016
Built with Various Oreo 7870 Source
Linaro GCC 6.1.1
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Compiled with Linaro6.1.1
[x]Native BlueLight Filter To J710X Panel
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]Fsync
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 8.0/8.1
[x]WireGaurd Support
[x]CPU VoltageControl
[x]CPU OC upto 1700MHz
[x]GPU OC Upto 1146MHz
[x]GCC 6/7 Support
[x]CRC Disabled by default
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Adoptable SD patched
[x]Deodex oreo support
[x]Many ram improvments
[x]No sim breaking with 8.1 rooting
[x]Encryption Support for StockRoms
[x]And many more listed in changelogs below
[x]Pre-Rooted
The kernel comes included with EliteTuner to control various kernel parts.
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock
Flash TWRP Recovery that can be found in J710 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
First time rooting, Open magisk app Once to ensure root is working
--Basic Info --
This kernel is mainly for users who want more than just root, As permissive allows for more flexibility with some of the mods found on xda
You are free to use this kernel in any future rom aslong as you Link this thread / Github Source
-- Credits --
@ananjaser1211 for this golden kernel and adding support for our device.
@BlackMesa123 and @corsicanu for working with my projects
@topjonhuw For Magisk
@geiti94 For Wifi password Fix
@Noxxxious For general helpAnd my Elite-Team for their contributions to my projects and being Awesome.
Download <> Changelog <> More info In second Post
Github Source : https://github.com/ananjaser1211/Helios_7870
XDA:DevDB Information
HeliosPro Kernel V2.6, Kernel for the Samsung Galaxy J7
Contributors
mohitmallick17, AnanJaser1211, corsicanu
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V2.6
Stable Release Date: 2019-02-27
Created 2019-02-27
Last Updated 2019-02-27
HeliosPro V2.6 Update
This is TOUCHWIZ only. The new compiler greatly improves performance on both 8.0 and 8.1 Based roms.
Enjoy, i know im not making any roms due to time, but i can support this kernel.
Changelog :-
- Native BlueLight Filter To J710X Panel
- Compiled with Linaro 6.1.1 Compiler
- Performance and battery greatly improved with new compiler
- Fixed custom ramdisk scripts
- Deodex Supported well with magisk
- GMS Blocker
- 99Killer service (kills gms in idle for better sleep)
- NFC Should work now
- More precise cpu voltage
- Magisk 18.1 Included
Follow the Full change log on the Github source.
Download : Google Drive
Size : 29.1MB
HeliosPro Kernel V2.5
Android 8.0/8.1 Only
J710F/FN/G/M/MN/GM (And any J7(6) variant)
Changelog :-
-Supports both 8.0 and 8.1.1 Stock/Ported TouchWiz Roms
- Updated drivers to latest J530F 8.1 Source
- Adoptable Storage (not tested)
- Encryption Support (on stock roms only)
- Improvements to GPU CPU Over clocking Thanks @renoxtv
- Ensure you have LATEST TWRP otherwise you wont be able to read Internal storage in TWRP
- Removed 160mhz GPU as it didnt work and caused issues
- Fixed CPU Undervolting (overvolting doesnt work well)
- GPU overclocking and Control now works on EliteTuner
- Updated Camera and WiFi to latest 8.1 Firmware
- Magisk 17.2 Included
- some other minor improvements to pretty much everything
Follow the Full change log on the Github source.
old changelog
HeliosPro Kernel V2.0
Android 8.0/8.1 Only
J710F/FN/G/M (And any J7(6) variant)
This can be used on any of my 8.0 Roms and tested on stock 8.1 Rom (does not break Simcard when rooting)
its based off multiple exynos7870 sources
P.S : GPU overclocking is not yet completed, you can use it manually with OxygenControl app
instead of EliteTuner app (included in zip)
HeliosPro v2.0 Changelog
- CPU Overclock upto 1.7GHz and VoltageControl
- GPU OverClock Upto 1146GHz
- Memory Mangment improvments
- MMC improvments
- Full Wakelock Control for wlan/bt and much more
- BoefflaWakelock Blocker With preconfigured WLs
- UKSM V1.2.3
- SecBattery control and Unstable current detection
- Powersuspend Driver for display
- Fsync Toggle
- Dynamic FSync
- Tons of I/O Schedulers
- Tons of CPU Governors
- StateNotifier Driver
- CPUFreq optimizations
- DisplayState hooks
- ondemand/conservative cache improvments
- Swap/VNSwap improvments
- WireGuard Support
- F2FS Support
- Frandom Support
- Muted useless debug msgs
- Tons other than can be tracked in commits
I/O Schedulers :-
- Maple
- BFQ
- ROW
- Fifo
- Fiops
- Sio
- SioPlus
- Tripandroid
- VR
- ZEN
CPU Governors :-
- Blu_Active
- CafActive
- hyper
- bioshock
- cultivation
- dancedance
- electrodemand
- impulse
- intellidemand
- ondemandX
- pegasusq
- smartass2
- smartmax
- wheatly2
Source : Github
RefinedKernel (7.0/7.1.1)
V2.7
-WireGuard Support
-HotSpot Fix for Note 8 port
-CPU Boot frequency reduced
-GPU/CPU Frequency improvments
-InputBooster Changes
-Boosted charging limit
-Updated Ramdisk
-Magisk 16.3 included
---------------------------------
V 2.6
-CPU/GPU Overclocking support
-Support for more variants
-Fixed Magisk resetprop conflict
-Disabled DM-Verity from source
-Fixed KNOX 0X0 PATCH
-Removed Audit Spams in log
-Disabled Samsung RMM
-Disabled RKP/KAP/TIMA From source
-Slight increase to charging current
-Inputbooster ~ 1.2GHz
-CPU OC upto 1700MHz
-GPU OC Upto 1146MHz
-Allow CPU To go as low as 200MHz
---------------------------------
-V2.5
-Magisk V15.2
-Dynamic Fsync 2.0
-HTC Asynchronous Fsync
-PowerSuspend 1.5
-UKSM V1.23
-Boeffla wakelock blocker v1.1.0
-StateNotifier & SysfsHelper
-Optimized ZSwap
-Optimized Deadline I/O
-Better Input Booster
-Quicker Doze entry
-Other improvments for Batterylife and performance
----------------------------------------------------
-V2.0 Note 8 port
Rebuilt the kernel from latest source code : J530FXXU1AQI3
Added CPU Governors
Added I/O Sched
Added TCP Algorithms
Added FakeKnox
Added ResetProp
Added 7.1.1 Support
Added CPU Improvments
Reduced Wakelocks
----------------------------------------------------
-V1.0 Initial release
F.A.QQ : What benefits Does this have over stock kernel ?
A : This kernel is aimed at Android enthusiasts who like to get the most out of their phones. But also is user friendly and pre customized for the average user to figure it out
Q : Can i use Kernel Auditor ?
A : Yes, but to utilized the full potential of this kernel including overclock and many more, you should use EliteTuner included in the ZIP
Q : What is Overclocking ?
A : Basically, Slightly more performance For an extra consumption in battery. you can google it for more details
Q : Why is CRC disabled by default ?
A : The extra operations can cause a big hit on Block performance
Q : Is it safe to overclock ?
A : ive tested the kernel on the Max over clock setting (Without turning off the 4 big cores) without any problems for a month
Q : What is SamsungHotplug ?
A : its a feature from samsung that Auto-Disables Inactive Big Cores to reduce power consumption
Q : Why i cant See/set Big cores frequency?
A : thats due to hotplug removing the sysfs files that control the frequency and overwrite them by stock values
Q : Does this kernel Pass SafteyNet ?
A : Yes, The kernel has all the needed bypasses already so it can even bypass safteynet without Magisk
Q : Can i use Knox Apps ?
A : No, You cant use secure Storage, However it has PirvateMode Support built in (if your ROM supports it too)
Q : Can i use this on Stock Rom ?
A : Yes, it works on both Stock and Custom (including 8.0/8.1 Ports)
Q : What is the MAX mAH i can charge at ?
A : charging limits are changed from 1A to 1.5A
--- Reserved ---
--- Reserved ---
WoW. Good Job!
And first comment
how to turn on the blue filter? Stock rom 8.1
alik23kz said:
how to turn on the blue filter? Stock rom 8.1
Click to expand...
Click to collapse
Simple. All you need to do is to push the BlueLightFilter apk from a supported rom 8.0/8.1 to priv-app and make a reboot. Add the toggle for it, or launch it via activity launcher.
Good kernel i installed in oreo fusion
Reset?
I am using Oreo Fusion, do I still need to factory reset or wipe my data?
chechemon said:
I am using Oreo Fusion, do I still need to factory reset or wipe my data?
Click to expand...
Click to collapse
No. You don't need to wipe data or factory reset.
Just flash it!
---------- Post added at 03:19 PM ---------- Previous post was at 02:36 PM ----------
This kernel is good for fix the bluelight filter on OreoFusion Rom. It really fixes it.
chechemon said:
I am using Oreo Fusion, do I still need to factory reset or wipe my data?
Click to expand...
Click to collapse
Flash and done
Can anyone please guide me to compile kernal for nethunter please andr also tell me from which i take source kernal for j710f and the compile it for nethunter
Iam using stock oreo rom 8.1.0 from samsung. I have rooted my phone with magisk and have installed oxygen kernel. Do i have to wipe data and flash this kernel or just flash it.
Sulltan Mehmood said:
Iam using stock oreo rom 8.1.0 from samsung. I have rooted my phone with magisk and have installed oxygen kernel. Do i have to wipe data and flash this kernel or just flash it.
Click to expand...
Click to collapse
Just flash it!
No one is replying me what the heck is that
please also we want a version for AOSP
Kindly update to version 2.7 as it is already released for j7 pro
Kindly compile it to work with some external wifi adapter(WLAN1) and enable ralink drivers please.
I want to use NetHunter with J710F.
Please enable these features kindly, request to OP.
Also port some goodies from oxygen kernel e-g spectrum, new kernel from source and gpu voltage and others please a humble request.. also make sure to increase battery timing with efficient performance with lowest consumption of battery.
=BUTTERFLY KERNEL=
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
Features:
Pie base: CAF & Prima Tag by LA.UM.7.6.r1-04500-89xx.0
Oreo base: CAF & Prima Tag by LA.UM.6.6.r1-11000-89xx.0
Legacy base: not updated pure sources from MiCode github
(prima tag LA.UM.7.6.r1-05500-89xx / LA.UM.6.6.r1-11300-89xx.0)
• KCAL color control
• Vibration intensity control
• Sound gain control
• Audio codec quality improved
• exFAT Support
• NTFS support
• F2FS support
• SquahFS support
• CIFS/SMB support
• Added CPU Hotplug (default disabled)
• Set lz4 for better zram work
• Boeffla wakelock blocker
• Added defaults rules for Boeffla wakelock blocker
• Disable vendor verify and set no verity
• CRC32: disable by default & enable toogle (average 30% I/O performance profit)
• Few patches from Franco kernel (disabled a lot of debugging stuff)
• Fsync: on/off support
• Battery deep optimisation: undervolting & additional tweaks
• Added Adreno Real Idler (supported turning it on/off)
• Improved interactive governor (patch from Franco kernel)
• Improved CPU boost, default is disabled (patch from Franco kernel)
• Improved conservative governor (patch from Franco kernel)
• I/O schedulers: noop, deadline, bfq, cfq (default), sio, fiops, maple, tripndroid, zen, anxiety, sioplus, fifo, v(r)
• Added CPU governors: darkness, zzmoove, relax, impulse, electron, nonconservative, lionheart, clarity, blu_active, yankactive, intelliactive, conservativex, ondemandx, interactivex, bioshock, darknessv5, alucard, smartmax_eps, pegasusq, lionfish, hyper, despair, barry_allen, xperience, alessa, chill, ondemandplus, ironactive, culvitation, tripndroid
• Added GPU governors: guardian, balanced, msm-adreno-plus
• TCP congestion algorithms: cubic, reno, westwood (default)
• Installer include fix for Wi-Fi SELinux permission
• Kernel installer also support custom ROMs
• GCam focus fix (thanks @teftel1608 and @33bca)
• GPU: clocks table reworked (lags free, performance grew). OC max gpu freq now is 725MHz
• Added WireGuard 0.0.20190601
• Fix for goodix-fp gestures on stock (thanks to @artyom5613 & @Broomber)
• Also in the v4 installer included fix fpc-fp gestures for the customs rom
now gestures for both fingerprints is are:
* swipe2right - paste text
* others like in rom's setting
(if you not like this - change it in the /system/usr/keylayout/uinput-*.kl)
• Memory & battery life optimization due config settings for kernel
• Added a block to wakelock from wifi
• I/O optimization
• Hide unlocked bootloader state (for apps like bank clients etc)
• Patches from Franco "mido" kernel for battery life improvement
• Added gpu Adreno simple algorithm (beast!!)
• Found a reason for which the CPU could for a long time not to raise the frequency to the maximum, it's all in the file /vendor/etc/thermal-engine.conf
See samples how to improve situation
• Compiled with GCC 9.1.0, which gave an increase in performance and speed of the kernel
• Reworked undervolting, battery lives even longer
• Added voltage control
• Maximum CPU frequency is now 2.4GHz
• EUOC version has a maximum GPU frequency of 750MHz
• added support for display status for CPU Hotplug & some schedulers
• all schedulers that have display status support:
alucard, chill, clarity, cultivation, darkness, electron, impulse, intelliactive, ironactive, nightmare, relaxed, anxiety-iosched and maple-iosched
• added drivers for few USB-Ethernet adapters
• added nightmare and dancedance CPU governors
• updated version with 2.2GHz overclocking
• removed the patch for hiding the bootloader state (there are more problems than good with it)
• new settings for a smooth interface in installer (applied for GSI only)
- DT2W fix for fts_ts [default disabled] (thanks @33bca) * tested on customs and GSIs. for latest maybe need to enable "Handwave gesture" in "Phh Treble Settings" > "Doze features" * #TODO
- Installer include Magisk preserve #TODO
<< download Pie v5.5 || download Pie v4.4 >>
<< download Oreo v5.5 || download Oreo v4.4 >>
undervolted (U) lower voltage for decrease overheat. also incredible battery saving
overclocked (OC) CPU max frequency is 2.4GHz, GPU max frequency is 725MHz
extra-overclocked (E) GPU max frequency is 750MHz (if you will face with graphical glitches - don't use it!)
Installations:
Backup boot.img, /system/lib/modules, /system/usr/keylayout and /vendor/lib/modules folders, /vendor/bin/init.qcom.post_boot.sh file if you want to go back
Flash Zip file with any TWRP recovery, wipe Dalvik cache, reboot and enjoy ^_^
Notice: if you have Magisk with modules installed maybe you'll get bootloop.
If you have Magisk don't need reinstall it after kernel because installer will save Magisk #TODO
Right way: if you have Magisk and modules - deinstall all. Then flash stock boot.img, then custom kernel, then other stuff like TWRP and Magisk.
Enough just dirty flashing kernel and then Magisk if you need it. All yours Magisk modules will preserved.
Issues:
- DT2W not work for fts_ts touchscreen
- tell me if find
XDA:DevDB Information
Butterfly kernel for Xiaomi Mi A2 Lite "daisy"
Contributors:
eremitein
Source Code:
https://github.com/eremitein/xiaomi_kernel_msm8953_daisy_butterfly
CREDITS:
All people, who made good code for this platform
Version Information
Status: Stable/Experimental
Release Date: 2019-04-15 (UTC +0)
Created: 2019-04-07
Last Updated: 2019-08-08
.
=VARIOUS POWER PROFILES=
[BATTERY DEEP BACKUP]
CPU governor: conservative
CPU max freq: 1804 MHz
GPU governor: msm-adreno-tz or guardian
Adreno idler: on
Tune Boeffla Wakelock Blocker: read this manual
CPU Hotplug: see attached screenshot
# Give ~10 minutes SOT per 1% battery while web browsing #
[NORMAL MODE]
CPU governor: ondemand / interactive
CPU max freq: set highest
GPU governor: msm-adreno-tz or balanced if lagzzs)
Adreno idler: on
CPU Hotplug: off
# Give ~8 minutes SOT per 1% battery while web browsing #
[PERFORMANCE MODE]
CPU governor: intelliactive, blue_active or nonconservative
CPU max freq: set highest
GPU governor: performance or msm-adreno-plus
Adreno idler: on
CPU boost: on
CPU boost freq: set to 1.84, 2.0 or 2.2GHz
CPU Hotplug: off
# Give ~5 minutes SOT per 1% battery while web browsing #
.
I will not help users if they are:
- using Magisk and moreover they installed modules;
- made any kernel settings (selected exotic governors, turned on hotplug and etc.);
- using option "Disable HW overlays";
- not sure that the same problems were not on the standard kernel
- not follow installation guide
All OC versions is always have CPU 2.2GHz
if not for you, then this is maybe if:
- you SoC/voltageregulator/phone doesn't support overclocking
- your device overheated due high outside temp or high load
- you system set restrictions to overclocking
.
Now im using CAF kernel with stock rom i want to flash butterfly what should i do delete CAF then install it??and for magisk delete all modul ?
hendri88 said:
Now im using CAF kernel with stock rom i want to flash butterfly what should i do delete CAF then install it??and for magisk delete all modul ?
Click to expand...
Click to collapse
yes, thats right
you may try dirty install but this is not a guarantee what system boot due to magisk specific
best way is remove all modules from magisk, remove magisk via flashing stock kernel and then boot to twrp and install butterfly
eremitein said:
yes, thats right
you may try dirty install but this is not a guarantee what system boot due to magisk specific
best way is remove all modules from magisk, remove magisk via flashing stock kernel and then boot to twrp and install butterfly
Click to expand...
Click to collapse
Ok i will try it thx bro
added power modes samples
https://forum.xda-developers.com/showpost.php?p=79288538&postcount=2
May I ask if this kernel could be modified so we can overclock? How exactly do we need to go about and do the modifications to the PLL tables? It'd be great if you could help out and make a tutorial or something.
Zewyni said:
May I ask if this kernel could be modified so we can overclock? How exactly do we need to go about and do the modifications to the PLL tables? It'd be great if you could help out and make a tutorial or something.
Click to expand...
Click to collapse
no, this build haven't overclock feature
Kernel updated (download v2)
Changelog v2:
Pie CAF & Prima updated to LA.UM.7.6.r1-04500-89xx.0
Improved interactive CPU governor (patch from Franco kernel)
Improved CPU boost and enable it (patch from Franco kernel)
Reworked conservative and nonconservative CPU governors
Reworked guardian, balanced and msm-adreno-plus GPU governors
Kernel installer now also support custom ROMs
Also have some changes in Power profiles
The touch sensetivity is somehow better with this kernel but I really miss dt2w... I'll be testing it for the week, hope you can fix dt2w! Thanks for your work on our device!
Eddie_53 said:
The touch sensetivity is somehow better with this kernel but I really miss dt2w... I'll be testing it for the week, hope you can fix dt2w! Thanks for your work on our device!
Click to expand...
Click to collapse
dt2w not supporting due missing stuff in official Xiaomi kernel sources
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/issues/1044
I can confirm that touch sensitivity is better on this Kernel. Gcam also runs smoother!
ExFAT support doesn't seem to be working though. I've tried to read an SD Card ExFAT formatted and it didn't work (corrupt error message).
eremitein said:
=VARIOUS POWER PROFILES=
[BATTERY DEEP BACKUP]
CPU governor: conservative
CPU max freq: 1689 MHz
GPU governor: guardian or msm-adreno-tz
Adreno idler: on
Tune Boeffla Wakelock Blocker:read this manual
CPU Hotplug: see attached screenshot
# Give 10-12 minutes SOT per 1% battery while web browsing #
[NORMAL MODE]
CPU governor: ondemand / interactive
CPU max freq: 2016 MHz
GPU governor: msm-adreno-tz or balanced if lagzzs)
Adreno idler: on
CPU Hotplug: off
# Give ~6 minutes SOT per 1% battery while web browsing #
[PERFORMANCE MODE]
CPU governor: nonconservative
CPU max freq: 2016 MHz
GPU governor: performance or msm-adreno-plus
Adreno idler: off
CPU Hotplug: off
# Give 4-5 minutes SOT per 1% battery while web browsing #
.
Click to expand...
Click to collapse
How to switch from one profile to another? I have kernel adiutor installed but there is no profile I the kernel section to select. Thanks to everyone answer and to the Dev for his work. Sorry for my English
Kr47os said:
How to switch from one profile to another? I have kernel adiutor installed but there is no profile I the kernel section to select. Thanks to everyone answer and to the Dev for his work. Sorry for my English
Click to expand...
Click to collapse
you may create various profiles in Kernel Aduitor
Tools > Profile
and which rom you using?
eremitein said:
you may create various profiles in Kernel Aduitor
Tools > Profile
and which rom you using?
Click to expand...
Click to collapse
I'm using stock ROM Pie 10.0.4 update version.
Kernel updates (see topic)
Changelog v2.99:
Added new builds:
- Oreo base CAF & Prima Tag by LA.UM.6.6.r1-11000-89xx.0
- Legacy base (not updated pure sources from MiCode github)
- Installer totally fixed for support wifi on custom roms
Oreo base is only for oreo vendors (9.6.x.0 versions)!!!
Why i built this and legacy variants?)
For compatibility. Because some people still using oreo stock or 8.1 vendor with GSI
BJumperBR said:
I can confirm that touch sensitivity is better on this Kernel. Gcam also runs smoother!
ExFAT support doesn't seem to be working though. I've tried to read an SD Card ExFAT formatted and it didn't work (corrupt error message).
Click to expand...
Click to collapse
for clean testing exFAT you need should be sure what ROM have support this FS
if with other kernel on your rom exfat work then, yeahh, something wrong with my kernel exfat
thanks for feedback)
eremitein said:
for clean testing exFAT you need should be sure what ROM have support this FS
if with other kernel on your rom exfat work then, yeahh, something wrong with my kernel exfat
thanks for feedback)
Click to expand...
Click to collapse
I'm on Stock ROM 10.0.4.0.
So, no exDAT support, right?
I am undecided whether to stay in oreo with this kernel or pie always switch to this kernel.
It is wrong to ask, instead of trying, but I don't have much time to test
No one with any feedback on the battery and stability?
(Noob question, what is it the difference of legacy kernel? )
=DRAGONHEART KERNEL=
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you
Features:
Linux upstream: 3.18.140
CAF & Prima upstream: LA.UM.7.6.r1-05500-89xx.0
• KCAL color control
• Vibration intensity control
• Sound gain control
• Audio codec quality improved
• exFAT Support
• NTFS support
• F2FS support
• SquahFS support
• CIFS/SMB support
• Added CPU Hotplug (default disabled)
• Set lz4 for better zram work
• Boeffla wakelock blocker
• Added defaults rules for Boeffla wakelock blocker
• Disable vendor verify and set no verity
• CRC32: disable by default & enable toogle (average 30% I/O performance profit)
• Few patches from Franco kernel (disabled a lot of debugging stuff)
• Fsync: on/off support
• Battery deep optimisation: undervolt & additional tweaks
• Added Adreno Real Idler (supported turning it on/off)
• Improved interactive governor (patch from Franco kernel)
• Improved CPU boost, default is disabled (patch from Franco kernel)
• Improved conservative governor (patch from Franco kernel)
• I/O schedulers: noop, deadline, bfq, cfq (default), sio, fiops, maple, tripndroid, zen, anxiety, sioplus, fifo, v(r)
• Added CPU governors: darkness, zzmoove, relax, impulse, electron, nonconservative, lionheart, clarity, blu_active, yankactive, intelliactive, conservativex, ondemandx, interactivex, bioshock, darknessv5, alucard, smartmax_eps, pegasusq, lionfish, hyper, despair, barry_allen, xperience, alessa, chill, ondemandplus, ironactive, culvitation, tripndroid
• Added GPU governors: guardian, balanced, msm-adreno-plus
• TCP congestion algorithms: cubic, reno, westwood (default)
• Installer include fix for Wi-Fi SELinux permission
• Kernel installer also support custom ROMs
• GCam focus fix (thanks @teftel1608 and @33bca)
• GPU: clocks table reworked (lags free, performance grew). OC max gpu freq now is 725MHz
• Fix for goodix-fp gestures on stock (thanks to @artyom5613 & @Broomber)
• Also in the v1 installer included fix fpc-fp gestures for the customs rom
Now gestures for both fingerprints is are:
* swipe2right - paste text
* others like in rom's setting
(if you not like this - change it in the /system/usr/keylayout/uinput-*.kl)
• Memory & battery life optimization due config settings for kernel
• Added a block to wakelock from wifi
• I/O optimization
• Added WireGuard 0.0.20190601
• Hide unlocked bootloader state (for apps like bank clients etc)
• Patches from Franco "mido" kernel for battery life improvement
• Added gpu Adreno simple algorithm (beast!!)
• Found a reason for which the CPU could for a long time not to raise the frequency to the maximum, it's all in the file /vendor/etc/thermal-engine.conf
See samples how to improve situation
• Compiled with GCC 9.1.0, which gave an increase in performance and speed of the kernel
• Reworked undervolting, battery lives even longer
• Added voltage control
• Maximum CPU frequency is now 2.4GHz
• EUOC version has a maximum GPU frequency of 750MHz
• added support for display status for CPU Hotplug & some schedulers
• all schedulers that have display status support:
alucard, chill, clarity, cultivation, darkness, electron, impulse, intelliactive, ironactive, nightmare, relaxed, anxiety-iosched and maple-iosched
• added drivers for few USB-Ethernet adapters
• added nightmare and dancedance CPU governors
• updated version with 2.2GHz overclocking
• removed the patch for hiding the bootloader state (there are more problems than good with it)
• new preset in installer for a smooth interface (applied for GSI only)
- DT2W fix for fts_ts [default disabled] (thanks @33bca) * tested on customs and GSIs. for latest maybe need to enable "Handwave gesture" in "Phh Treble Settings" > "Doze features" * #TODO
- Installer include Magisk preserve #TODO
<< DragonHeart v3.3 || DragonHeart v2.2 >>
undervolted (U) lower voltage for decrease overheat. also incredible battery saving
overclocked (OC) CPU max frequency is 2.4GHz, GPU max frequency is 725MHz
extra-overclocked (E) GPU max frequency is 750MHz (if you will face with graphical glitches - don't use it!)
Installations:
Backup boot.img, /system/lib/modules, /system/usr/keylayout and /vendor/lib/modules folders, /vendor/bin/init.qcom.post_boot.sh file if you want to go back
Flash Zip file with any TWRP recovery, wipe Dalvik cache, reboot and enjoy ^_^
Notice: if you have Magisk with modules installed maybe you'll get bootloop.
If you have Magisk don't need reinstall it after kernel because installer will save Magisk #TODO
Right way: if you have Magisk and modules - deinstall all. Then flash stock boot.img, then custom kernel, then other stuff like TWRP and Magisk.
Enough just dirty flashing kernel and then Magisk if you need it. All yours Magisk modules will preserved.
Issues:
- DT2W not work for fts_ts touchscreen
- tell me if find
XDA:DevDB Information
DragonHeart kernel for Xiaomi Mi A2 Lite "daisy"
Contributors:
eremitein
Source Code:
https://github.com/eremitein/xiaomi_kernel_msm8953_daisy_dragonheart
CREDITS:
All people, who made good code for this platform
Version Information
Status: Stable/Experimental
Release Date: 2019-06-13 (UTC +0)
Created: 2019-06-12
Last Updated: 2019-08-08
.
reserv
I will not help users if they are:
- using Magisk and moreover they installed modules;
- made any kernel settings (selected exotic governors, turned on hotplug and etc.);
- using option "Disable HW overlays";
- not sure that the same problems were not on the standard kernel
- not follow installation guide
All OC versions is always have CPU 2.2GHz
if not for you, then this is maybe if:
- you SoC/voltageregulator/phone doesn't support overclocking
- your device overheated due high outside temp or high load
- you system set restrictions to overclocking
.
also for oreo?
What are the differences between this and ButterFly kernel?
whats the difference between this and butterfly? changelog looks the same
Same butterfly only upsteam
How to change from butterfly kernel? Just dirty flash?
Henki98 said:
also for oreo?
Click to expand...
Click to collapse
never. this base have only pie kernel
Sonthaya said:
Same butterfly only upsteam
Click to expand...
Click to collapse
you right)
syukri95 said:
How to change from butterfly kernel? Just dirty flash?
Click to expand...
Click to collapse
yes
eremitein said:
I will not help users if they are:
- using Magisk and moreover they installed modules;
- made any kernel settings (selected exotic governors, turned on hotplug and etc.);
- using option "Disable HW overlays";
- not sure that the same problems were not on the standard kernel
- not read installation guide
All OC versions is always have CPU 2.2GHz
if not for you, then this is maybe if:
- you SoC/voltageregulator/phone doesn't support overclocking
- your device overheated due high outside temp or high load
- you system set restrictions to overclocking
.
Click to expand...
Click to collapse
OC versions always run at 2.2GHz or only when under load such as playing games? If it always run at 2.2GHz, will it hurts CPU in long term?
@Funk Wizard I'll request you to look into it due to violation of GPL license in a kernel thread and also Improper kernel commit history.
What is exactly the difference between this and Butterfly kernel? Furthermore, is it recommended only to flash this on a CAF-based rom? If so, can't we only flash it on the caf-based build of PE?
akkh99 said:
OC versions always run at 2.2GHz or only when under load such as playing games? If it always run at 2.2GHz, will it hurts CPU in long term?
Click to expand...
Click to collapse
i wrote "have"
not "run"
Veran125 said:
What is exactly the difference between this and Butterfly kernel? Furthermore, is it recommended only to flash this on a CAF-based rom? If so, can't we only flash it on the caf-based build of PE?
Click to expand...
Click to collapse
all kernels for daisy is always CAF
different is in base - this base is upstreamed CAF & linux, latest butterfly based on the legacy Xiaomi sources
Tell me if it is better than butterfly.
is wifi working in UV kernel? (DragonHeart-daisy-20190612-v1-U.zip)
akkh99 said:
OC versions always run at 2.2GHz or only when under load such as playing games? If it always run at 2.2GHz, will it hurts CPU in long term?
Click to expand...
Click to collapse
I'm have many temp is down to 1689
DarkFrenzy said:
is wifi working in UV kernel? (DragonHeart-daisy-20190612-v1-U.zip)
Click to expand...
Click to collapse
why you asked?)
all builds have working wifi
but some magisk modules may brick wifi on any kernels
@eremitein is it possible to add voltage control interface so we can control it ourselves in ie. Kernel Adiutor ?
Im on Piexl Experience and magisk installed with some modules installed like youtube vanced etc.
Can i just Dirty flash it or i should i follow some steps??
aerzjee said:
@eremitein is it possible to add voltage control interface so we can control it ourselves in ie. Kernel Adiutor ?
Click to expand...
Click to collapse
maybe in future...
now i don't have much free time for developing. and also my google build server is suspended (trial time is over), so i take pause for rest
the source codes of both of my kernels are available on the Github, anyone can take and use them on the basis of the GPL - learn how to build kernel, add functionality, modify and release(with saving all copy(left)rights in the code and publish it), build into the rom... you can get quick acquainted with the GPL here
CherryFarmer8 said:
Im on Piexl Experience and magisk installed with some modules installed like youtube vanced etc.
Can i just Dirty flash it or i should i follow some steps??
Click to expand...
Click to collapse
please, people, please - read first and third posts and you'll find all answers:angel: