Method 1
Make Sure To First Unlock Bootloader On iQOO 3 5G Before Proceeding To Install Custom Recovery On Your Phone!
1.) First off Enable USB Debugging On iQOO 3 5G
Ad by Valueimpression
Go To Settings >> System >> About Phone >> Tap On Build Number 6-7 Times
Now Go Back >> Advanced Settings >> Developer Options >> Enable “USB Debugging”
2.) Now You Have To Setup ADB And Fastboot On Windows PC This Is Very Important Step
3.) After That Download TWRP Recovery File On Your PC And Renamed The Downloaded Recovery File Name To twrp.img.
4.) Once The Files Are Downloaded Go-To Platform Tools Folder >> Type “cmd” In The Address Bar & Press Enter To Open Command Prompt
5.) Connect Your Phone To PC/Laptop >> And Type The Following Command
adb devices
Once you write this command you must see your device (Random String). If not then you have not installed the drivers properly. So, install it properly and try again.
7.) Next Type The Following Command To Boot Your Phone Into Fastboot Mode
fastboot reboot bootloader
6.) Now Type The Following Command To Install TWRP Recovery
fastboot flash twrp.img
The flashing process with start so, wait till the flashing process completes
7.) Now type the following command to Reboot Your Phone
fastboot reboot
8.) That’s It ? You Have Successfully Install TWRP Recovery On Your iQOO 3 5G
Install TWRP Recovery On iQOO 3 5G Using TWRP App: Method 2
1.) First Off Open Play Store Search For “TWRP” & Install It.
Ad by Valueimpression
2.) After That Open TWRP App & Enable Root Access
3.) Tap On TWRP Flash >> After That It Will Ask You To Allow Root Access Just Allow It
4.) Now You Have to Search Your Device & Select It
5.) After That You Will See The List Of TWRP Image Version >> Select Latest Version Of TWRP Image & Download It On Phone Internal Storage
6.) Once Download Is Completed Go Back >> Again Tap On TWRP Flash >> Now Tap On “Select a file to flash” >> Now Locate The TWRP Image File That You Just Downloaded >> Select It & Tap On Flash To Recovery
7.) It Will Take Some Seconds To Complete The Flashing Process
8.) That’s It ? You Have Successfully Install TWRP Recovery On Your iQOO 3 5G
How To Install TWRP Recovery On iQOO 3 5G Without PC: Method 3
1.) First Off Open Play Store Search For “Flashify” & Install It.
2.) Open Flashify App >> Next Allow Root Access
Note: Backup Your Current Recovery. This Will Help You To Restore Your Current Recovery If Something Went Wrong.
3.) Now Tap On Backup/Restore >> After That Tap On Backup Current Recovery >> Select Location >> And Then Tap On Back It Up
4.) Go To Flash >> Tap On Recovery Image >> Now Tap On Download TWRP >> After That Select Latest Version Of TWRP
It Will Take Some Time To Download Recovery Files. Once The File Is Downloaded Successfully Tap On “Yup”
5.) After That Tap On Reboot Now
6.) That’s It ? You Have Successfully Install TWRP Recovery On Your iQOO 3 5G
SOURCE : MOD EDIT: Link removed
J2A9 said:
5.) After That You Will See The List Of TWRP Image Version >> Select Latest Version Of TWRP Image & Download It On Phone Internal Storage
Click to expand...
Click to collapse
Please upload here the Twrp.img if have it.
MOD ACTION:
Thread closed and link removed.
Related
This is a guide on how to use the newest TWRP that is compatible being flashed to recovery
This requires s-off and unlocked bootloader, if your boot loader is locked follow this guide steps 2 and 5 to 17: http://forum.xda-developers.com/butterfly-3/development/stock-rom-stock-5-0-2-cure-t3356875
1. Download this file and save in your adb/fastboot folder https://drive.google.com/open?id=0B6qqU5WVQ2khMVRMSUhOUWY3WU0
2. Enable adb on your phone.
3. Press shift+right click in blank space of adb/fastboot folder and select open command terminal here
4. Type adb reboot download
*phone reboot to download mode*
5. fastboot devices
*htv31 appears*
6. Type fastboot flash recovery b3twrp3.0.0.img
7. Press power button then use volume - to highlight reboot bootloader and press power to select
8. Use vol- scroll to reboot recovery select with power button
*HTC non official warning, then twrp*
9. Go to backup and create a backup on external storage (preferably)
10. Download this file and place on sd card: https://download.chainfire.eu/921/SuperSU
11. Navigate to install and then navigate to the su zip and flash it.
12. Reboot and you have root with most recent binaries.
Credit for twrp build goes to @ boa19861105
I can even flash supersu and xposed framework in relocked bootloader, so no wipe in the rooting process.
P.S. Thanks for the great guide for converting to TW rom and rooting!
need someone test this version of TWRP recovery
https://github.com/sabpprook/android_device_htc_b3tuhl/releases/download/3.0.2-0/twrp-3.0.2-0-b3.img
My Github: https://github.com/sabpprook/android_device_htc_b3tuhl
This methode work with b 2?for sure..change step 6 .img with b2,thanks
Sometimes I lost root after reboot. How to fix this?
PROCEDURE
A. UNLOCK THE BOOTLOADER
(This will wipe you data)
1. Register for an account at HTCdev.com
2. Visit this link http://www.htcdev.com/bootloader/
3. On Select Your device option, Choose All Other Supported Models
4. Follow all the steps and you will succeed to unlock the bootloade
B. FLASHING TWRP
1. Downlaod TWRP recovery from here https://mega.nz/#!4wk0Vbgb!Cg86YCp65NOFh86TkL6QfrsqbPDG-ZK_DYEIOFgJN6Q
2. Download mini-Sdk mini-sdk
3. Extract it
4. Open command prompt(Click in the extracted folder and press shift and right click then choose to open command prompt here)
5. Boot phone into Download mode by switching off the phone then hold power and volume down buttons
and connect to PC with a USB cable
6. On the command prompt, Type: fastboot flash recovery <name of recovery.img>
example: fastboot flash recovery twrp_e9s.img
7. Reboot Bootloader==> Reboot recovery
C. TO ROOT
Download UPDATE-SuperSU-v2.65-20151226141550.zip and install in recovery mode
The links are not working
The Mega links are not working.
Hi guys,
I've been using WugFresh's root toolkit to root the pixel which has worked fine thus far. Recently I upgraded OTA to Nougat 7.1.2 (N2G47O). Now I've lost root and can't seem to get it back. Attempting to root the device through the toolkit no longer works as the file dependancy hasn't updated properly - "No-Force Encrypt" needs to be downloaded/updated. The link doesn't work however. I'm suspecting that WugFresh hasn't updated to the latest file to match N2G47O.
I don't understand this properly and information online seems limited. Can anyone advise on how to get this thing rooted again? With or without the toolkit will be fine.
Thanks in advance.
Just fastboot flash TWRP then install Magisk in TWRP. Poof... root.
To elaborate on this: download the latest latest "Recovery Flashable.zip" from http://www.supersu.com/download and copy it to the Download folder of your tablet.
In NRT under "Options > Custom recovery" select "Utilize Open Recovery by Team Win Recovery", then use Advanced Utilities to either
- "Fastboot Flash > Recovery" to flash TWRP, then "Quick Tools > Reboot recovery" to start TWRP
or
- "Fastboot Boot > Custom recovery" to start TWRP only once / non-permanent.
In TWRP allow write access to /system, then "Install" SuperSU.ZIP from your Download folder and reboot.
Thanks for your help guys. There seems to be another problem now though. I've followed the steps above and attempted to install TWRP recovery using the tools on the NRT. During the process TWRP asked me for the key to decrypt system data. I don't have one as far as I'm aware. Only my regular system pin. I tried that but it isn't accepting it. I had to accept TWRP leaving the system unmodified. Now I cannot boot into the system at all, only into the TWRP recovery! Why is it encrypted? I never set up encryption...
You seem to have somehow messed up your /system image. To restore it without losing your data, follow these steps:
- find the folder where your ADB.EXE is installed. Typically that would be C:\Program Files (x86)\WugFresh Development\Nexus Root Toolkit\data
- we will call that the ADB folder
- download a Pixel C N2G47W factory image from here: https://developers.google.com/android/images
- there will be a "bootloader-dragon-google_smaug.7900.50.0.img" and a "image-ryu-n2g47w.zip" inside the downloaded ZIP file. Copy these to your ADB folder.
- start TWRP. Press Cancel when asked for encryption key. If asked for write access to /system: allow it
- select Wipe, then Advanced Wipe. Select "Dalvik / ART Cache" and "Cache", then Swipe to Wipe
- In TWRP select Reboot, then Bootloader. If asked to install TWRP: Do Not Install. Should end up with "Waiting for fastboot command".
- alternatively: start your tablet manually into fastboot mode: Power off, then hold the volume down button, after 2 seconds shortly press the power button and hold it until a menu appears
- select "Switch to fastboot mode" with the volume buttons, start it with the power button. "Waiting for fastboot command".
- when in fastboot mode: start an administrative command prompt, CD to your ADB folder
Code:
fastboot flash bootloader bootloader-dragon-google_smaug.7900.50.0.img
fastboot reboot-bootloader
- wait until it says "Waiting for fastboot command" again
Code:
fastboot update image-ryu-n2g47w.zip
- after several flash actions (be patient!) the Pixel C will boot into Android. It may take a while and a second boot can occur.
To install SuperSU you can't use the Download folder of the tablet because /data is encrypted (sorry, my bad).
If you can use a USB stick with OTG, then:
- copy the "Recovery Flashable.zip" from http://www.supersu.com/download to the USB stick
- use NRT to start TWRP without flashing it (Advanced Utilities, Fastboot Boot, Custom Recovery)
- press Cancel when asked for encryption key. If asked for write access to /system: allow it.
- attach the USB stick
- Install, Select Storage, USB OTG, OK
- select SuperSU.ZIP from USB stick and reboot.
If you cannot attach a USB stick:
- copy SuperSU.ZIP to your ADB folder
- start TWRP as described above
- Advanced, ADB Sideload
Code:
adb sideload SuperSU-v2.78-201609011115.zip
- Reboot
This worked a treat. Now rooted and running 7.1.2! Thank you for taking the time to help out. +1
After failing some 1-click rooting methods, for the first time I tried to do it the hard way.
That turned out to be a pretty easy way thanks to some handy links to drivers and other files I found.
Infinity thanks to the thread I found platform-tools from and the website called "getdroidtips" for the Custom TWRP for the HS2.
NOTE: THIS GUIDE WILL WIPE YOUR DEVICE SO BE PREPARED
Standard warning: FOLLOW THIS GUIDE AT YOUR OWN RISK. REMEMBER, AS PER MY NAME I AM A TOTAL NUB. I DO NOT TAKE RESPONSIBILITY FOR YOUR PHONE MALFUNCTIONING, BRICKING, BLOWING UP OR DROWNING IN COOKING OIL (rip my Elephone S7)
Pastebin code for missing links: F2RGqM1A
1) Preparation
Download the latest Flashable.Zip from [ ]
Place SuperSu.zip in your sd card or internal storage
Enable Developer Options by going to Settings -> "About Phone" -> Click "Software Version" 7-8 times
Go to developer Options in Settings
Enable OEM Unlocking
Enable USB Debugging
Shutdown your phone by holding the power button
Boot into fastboot by holding the Volume Up key + Power Button
Press Volume Down key to get into fastboot
2) On your Windows PC:
Download the file from [ ] and extract the platform-tools folder (I extract to "D:\Downloads" in this example)
Download the Custom TWRP from [ ] and place it inside the platform-tools folder
Connect your device to your computer
press Win+R, type cmd and press enter
2.1) (not always needed)
If your device won't connect or the steps below don't work, try updating drivers:
Connect your phone while it's in fastboot
open start menu, search and open Device Manager
check inside Portable Devices or Android Devices for your phone's name
or look for Android Bootloader Interface
if it's not there, it might be named something else, with an icon that has a yellow triangle inside it.
Right click it, Update Driver
> Browse my computer for driver software
> Let me pick from a list of available drivers on my computer
> select Android Bootloader Interface
to check if you are connected, type "fastboot devices" in cmd and you'll see a device code
3) Unlocking Bootloader
In cmd, enter the following commands:
Code:
D:
cd D:\Downloads\platform-tools
fastboot oem unlock-go
THIS STEP WILL WIPE YOUR DEVICE DATA
wait for restart
4) Booting into TWRP
Go to device Settings again and ensure OEM Unlocking and USB Debugging are still Enabled. Reboot into fastboot.
In cmd:
Code:
fastboot boot twrp-3.1.1-0-20171128-UNOFFICIAL-HS2.img
(In case above cmd line doesn't work, type "fastboot boot twrp" and press Tab)
5) Backing up your rom and data (Optional but recommended)
Inside TWRP, Click Backup, tick everything, select desired directory and swipe to backup.
Reboot and follow step 5 again if needed
6) Installing SuperSU with root privileges
Inside TWRP, Click Install and select SuperSU.zip
Swipe to install and reboot
Enjoy
Please port miui 9 or lineage os 15 for micromax canvas infinity hs2
NubbyMcNubNub said:
After failing some 1-click rooting methods, for the first time I tried to do it the hard way.
That turned out to be a pretty easy way thanks to some handy links to drivers and other files I found.
Infinity thanks to the thread I found platform-tools from and the website called "getdroidtips" for the Custom TWRP for the HS2.
NOTE: THIS GUIDE WILL WIPE YOUR DEVICE SO BE PREPARED
Standard warning: FOLLOW THIS GUIDE AT YOUR OWN RISK. REMEMBER, AS PER MY NAME I AM A TOTAL NUB. I DO NOT TAKE RESPONSIBILITY FOR YOUR PHONE MALFUNCTIONING, BRICKING, BLOWING UP OR DROWNING IN COOKING OIL (rip my Elephone S7)
Pastebin code for missing links: F2RGqM1A
1) Preparation
Download the latest Flashable.Zip from [ ]
Place SuperSu.zip in your sd card or internal storage
Enable Developer Options by going to Settings -> "About Phone" -> Click "Software Version" 7-8 times
Go to developer Options in Settings
Enable OEM Unlocking
Enable USB Debugging
Shutdown your phone by holding the power button
Boot into fastboot by holding the Volume Up key + Power Button
Press Volume Down key to get into fastboot
2) On your Windows PC:
Download the file from [ ] and extract the platform-tools folder (I extract to "D:\Downloads" in this example)
Download the Custom TWRP from [ ] and place it inside the platform-tools folder
Connect your device to your computer
press Win+R, type cmd and press enter
2.1) (not always needed)
If your device won't connect or the steps below don't work, try updating drivers:
Connect your phone while it's in fastboot
open start menu, search and open Device Manager
check inside Portable Devices or Android Devices for your phone's name
or look for Android Bootloader Interface
if it's not there, it might be named something else, with an icon that has a yellow triangle inside it.
Right click it, Update Driver
> Browse my computer for driver software
> Let me pick from a list of available drivers on my computer
> select Android Bootloader Interface
to check if you are connected, type "fastboot devices" in cmd and you'll see a device code
3) Unlocking Bootloader
In cmd, enter the following commands:
THIS STEP WILL WIPE YOUR DEVICE DATA
wait for restart
4) Booting into TWRP
Go to device Settings again and ensure OEM Unlocking and USB Debugging are still Enabled. Reboot into fastboot.
In cmd:
(In case above cmd line doesn't work, type "fastboot boot twrp" and press Tab)
5) Backing up your rom and data (Optional but recommended)
Inside TWRP, Click Backup, tick everything, select desired directory and swipe to backup.
Reboot and follow step 5 again if needed
6) Installing SuperSU with root privileges
Inside TWRP, Click Install and select SuperSU.zip
Swipe to install and reboot
Enjoy
Click to expand...
Click to collapse
Hi please help me, after flashing recovery my phone is on bootloop now, what do i do
Hem97 said:
Please port miui 9 or lineage os 15 for micromax canvas infinity hs2
Click to expand...
Click to collapse
I wish I could.
Sudhangshu said:
Hi please help me, after flashing recovery my phone is on bootloop now, what do i do
Click to expand...
Click to collapse
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
NubbyMcNubNub said:
I wish I could.
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
Click to expand...
Click to collapse
Hi, "flashboot boot twrp" wasnt working at all, so i tried "flashboot flash twrp" and all i have is a bootloop. So after flashing recoveru i booted my phone to fastboot and run the command, " flashboot boot recovery recovery.img" where recovery is the custom recovery image and it booted into recovery. Then there is one more step to do that allowed me to finally boot into my os. Its working fine and i still have twrp installed on my phone
---------- Post added at 06:53 PM ---------- Previous post was at 06:49 PM ----------
NubbyMcNubNub said:
I wish I could.
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
Click to expand...
Click to collapse
Btw i dont find any pastebin links, im sorry im just a noob too..... Lol
Want custom rom for Qmobile Qinfinity
I want a custom rom for Qmobile Qinfinity.
Because its own rom lags and does not have full features. Please give the rom like lineage os,RR,Or Stock
Please Help?:good:
hi bro,recently i just buy a new phone which is micromax canvas infinity.i have rooted my phone successfully,but there are no custom roms available for this phone.can you develop any custom rom for this phone?that will be very helpful...
I have written this comprehensive step by step guide on how to flash CRDROID android 12 ROM for the OnePlus 8 Pro. The original instructions do not cover enough detail.
Ensure you have all applicable drivers installed onto your computer by following this video tutorial:
Reset your phone through using this MSM tool to return to Oxygen OS 11: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4084953/
Install the application to your windows device
Choose the international version
Turn off the phone. Hold BOTH the VOLUME UP AND DOWN at the same time and plug into the computer. The application will now recognise the phone where you can do a factory reset to Oxygen OS 11.
Install Oxygen OS11 on BOTH Slots:
install the latest Oxygen OS 11 from the OnePlus website, as a local upgrade: https://www.oneplus.com/uk/support/softwareupgrade/details?code=PM1587123976
If the official link goes down, find the file from here: https://forum.xda-developers.com/t/oneplus-8-pro-rom-ota-oxygen-os-repo-of-oxygen-os-builds.4084315/
Restore to oos 11 using msm -> unlock bootloader -> download latest oos 11 -> transfer to phone -> then system update via local upgrade -> reboot and update via local upgrade + reboot again
Connect to the internet
Click multiple times on the build number after updating to enable developer options
Enable options of OEM unlocking and USB debugging
Once you press usb debugging, connect your device to your pc -> a window will pop up on your device -> press always allow from device. You need to do this for usb debugging to work.
Enter fastboot mode by pressing and holding the Power button to bring up the Power menu and select 'Power Off'. Once you have done that: Press and hold the Volume Up', 'Volume Down', and 'Power' keys together to enter Fastboot Mode.
Unlock the OEM:
Once you're in fastboot mode after pressing oem unlock + usb debugging toggles -> type 'fastboot oem unlock' -> press volume up + power for yes and the device will reboot.
To install the RECOVERY
Download the file named like this: crDroidAndroid-12.0-XXXXXXXX-instantnoodlep-v8.X.zip and recovery from the officaial website:
https://crdroid.net/instantnoodlep/8
put it in the same folder where your adb files are
Open CMD from the adb tools folder on your computer, and type 'fastboot devices'.
if working properly, you will see your device
Type 'fastboot flash recovery recovery.img'
Reboot to recovery
To install custom ROM from recovery
choose "Factory reset"
choose "Apply update"
adb sideload "crDroidAndroid-12.0-XXXXXXXX-instantnoodlep-v8.X.zip"
reboot recovery
choose "Apply update"
Install the correct GAPPS
You're supposed to use nikgapps-SL basic and Nikgapps-SL addons (if needed to restore from playstore backup. Use pixel wizard setup for this.) Good examples of addons you should use will be attached.
For Nikagpps-SL: https://sourceforge.net/projects/nikgapps/files/Releases/NikGapps-SL/09-Jul-2022/ and for Nikagpps-SL addons: https://sourceforge.net/projects/nikgapps/files/Releases/Addons-SL/09-Jul-2022/
adb sideload "gapps"
choose "Apply update"
adb sideload addons
Do the "Apply Update" and sideload each addon
choose "Apply update"
To root the phone:
adb sideload magisk.zip (Change magisk.apk to magisk.zip)
reboot to system
Please comment below if this has helped!
Thank you. By carefully following your guide I was able to unbrick my 8 pro and finally install a non-oxygenos android 12 build. Other guides did not work for me.
I don't see where recovery.img is on crdroid website?
This guide helped me get crdroid running, however I'm having severe issues getting ANY google apps to run. I sideloaded the ones you recommended, but play store wasn't installed, play services wasn't installed. After I downlaoded those apks it did nothing and they dont work. My biggest problem is I can't link my google account to my phone in the settings, I don't see 'Accounts' anywhere in the settings; Which has all my contacts. So at first I thought it was a success, now my phone is literally useless to me until I get my account linked to my phone which seems impossible with crdroid.
How can we do this with TWRP install? If not, why not? Why do all the instructions I see for crDroid use ADB sideload instead of just 'install zip' like every other custom ROM? Also, how do we install Magisk? The usual way via TWRP?