Develop Bugs

[DISSECTED TUTORIAL FOR NEWBIES] recover from **stuck in htc boot screen** via cmd

Yes, there are tutorials out there on how to recover from total disaster, which is really useful. I've actually used those last month to recover from HTC BOOT SCREEN logo, but i can still see a couple of folks out there who can't get out of the problem...
This guide will be helpful to those who don't have back-up on their CWM and no ROM saved on their SD card
I'm doing this guide to at least minimize the confusions or the need in posting on how to FIX their phone, i checked the STICKY threads and there's no clear guide on how to do it VIA "CMD", all information below are gathered around the web, xda forums, and some from my experience, thanks to them
I'm just trying to help out and make things easier.
If this thread helped you with your problem, you can always HIT THANKS & RATE above and to the posts that I linked here
HERE'S HOW:
1. Turn off then plug your device, and wait till it says "Device Connected" on your task bar
2. NOW we need to check if you have the driver installed for you're device, just simply right click the "My Computer>Properties>Device Manager"
3. If there will be an EXCLAMATION MARK or QUESTION MARK (not sure of the two) on your HTC device, you need to download the correct driver
4 go here and download the correct driver
5. Once Downloaded, go back to Device Manager, Right click your connected device with Exclamation/Question mark, then choose Update Driver>Browse Files>Select your downloaded driver, once finished. you can close those windows and proceed to next step.
6. Create a New Folder into your drive C:, rename it "fastboot"
7. Download fastboot files here, extract>copy all extracted files to the fastboot folder that you've just created.
8. Now, we need to make sure that the ADB inside the fastboot folder that we created is working, on how to check? go here
9. This is important, BREATHE, RELAX, and SMILE Now to the next step....
10. We need to download the CWM here, just choose the latest unofficial test recovery with USB issues fixed and automount and any ROM that you like here
11. After downloading, we must rename the ROM to update.zip and CWM to recovery.img
12. Extract the ROM and get the boot.img inside
13. COPY boot.img, update.zip and recovery.img to fastboot folder
14. Put your phone into fastboot mode with unlocked bootloader
15. Flash boot with command "fastboot flash boot boot.img"
16. After flashing, Boot recovery using "fastboot flash recovery recovery.img" command
17. After flashing recovery.img, use command "adb push update.zip /sdcard/update.zip" to send the ROM to phone, just be patient, it might not respond for a couple of minutes since the ROM file is big which is usually 500mb,
AS PER ckpv5 there's some changes to this new recovery, see below:
ckpv5 said:
step 10 : Download the latest recovery: http://xda.richardtrip.org/HTC/reco...kwork-touch-5.8.3.1-endeavoru_fixedadbusb.img
step 16 : In fastboot mode :
fastboot flash recovery recovery-clockwork-touch-5.8.3.1-endeavoru_fixedadbusb.img
fastboot erase cache
enter recovery, the sdcard is auto-mounted, means that you can directly access the sdcard by connecting the usb cable to pc. Copy the ROM.zip or update.zip to sdcard.
step 17 : no need
step 18 : Install the ROM from update.zip in recovery
Click to expand...
Click to collapse
18. Install the ROM from update.zip in recovery
19. Reboot your phone and everything should be working again, just be patient with the first reboot, it might take some time to open
20. If still stuck? go back to fastboot usb, type this command to CMD, "fastboot erase cache" then "fastboot reboot-bootloader"
21. That's all, enjoy your One X again
*******************************************
NOTE:
- If step 17 is not happening, just don't rename the ROM file to update.zip, leave as it is, and use this command instead, "adb push update.zip /sdcard/EXACT NAME OF THE ROM.zip"
*******************************************
COMMON QUESTIONS OF THE NEWBIES:
How to enter fastboot?
- Hold down POWER BUTTON + VOLUME DOWN, wait for atleast 3-5 seconds
How to open CMD?
- Simply click the Start button of your PC, you should see there CMD or COMMAND PROMPT or you can TYPE CMD in the search panel and hit Enter
How can i open the fastboot folder via CMD?
- Once CMD is open, type "cd c:\fastboot" hit enter, then you can enter the commands, use c:\ if fastboot files is located in your drive c, d:\ if located in your drive d...
*******************************************
You can also go to this STICKY THREAD for additional reference.
If i missed something, please feel free to comment, much appreciated
That's All, hope it helps.. Have a Good Day!

mikey0105 said:
16. After flashing, Boot recovery using "fastboot boot recovery.img" command
Click to expand...
Click to collapse
I really appreciate you putting this together. As with most things on this forum, keeping it in a place where it could be easily discovered is the real trick. God help those of us that ask a question that was asked 2 years ago and is now buried deep within the forum. Lots of Android people get all twisted up about that.
Question: on step 16, did you mean to say "fastboot flash recovery recovery.img"? Or is that the Mac/Linux syntax I'm thinking of?

freicook said:
I really appreciate you putting this together. As with most things on this forum, keeping it in a place where it could be easily discovered is the real trick. God help those of us that ask a question that was asked 2 years ago and is now buried deep within the forum. Lots of Android people get all twisted up about that.
Question: on step 16, did you mean to say "fastboot flash recovery recovery.img"? Or is that the Mac/Linux syntax I'm thinking of?
Click to expand...
Click to collapse
oh! thanks, TYPO.. I'll edit it now, its should be "fastboot flash recovery recovery.img"

this is exactly what I'm lookin' for! after messing my phone.. you are a champ! thanks for compiling everything...

mr_tonysmith said:
this is exactly what I'm lookin' for! after messing my phone.. you are a champ! thanks for compiling everything...
Click to expand...
Click to collapse
No worries... feel free to go back here every time you mess your phone! just kidding..

With the latest recovery, there is no need for step 17.
Just connect the cable, the USB Storage is mounted. If it is not pop-up, open your My Computer, you will see the HTC Storage drive. Copy the ROM.zip and flash.

ckpv5 said:
With the latest recovery, there is no need for step 17.
Just connect the cable, the USB Storage is mounted. If it is not pop-up, open your My Computer, you will see the HTC Storage drive. Copy the ROM.zip and flash.
Click to expand...
Click to collapse
thanks for the info buddy! I'll edit my post and put this info!

ckpv5 said:
With the latest recovery, there is no need for step 17.
Just connect the cable, the USB Storage is mounted. If it is not pop-up, open your My Computer, you will see the HTC Storage drive. Copy the ROM.zip and flash.
Click to expand...
Click to collapse
thanks for the info buddy! I'll edit my post and put this info!
EDIT: before i edit the post, just a clarification... we cannot access the SD card from my computer if the device will not open right? can you please explain further? the process of this new recovery? thanks much!

step 10 : Download the latest recovery: http://xda.richardtrip.org/HTC/reco...kwork-touch-5.8.3.1-endeavoru_fixedadbusb.img
step 16 : In fastboot mode :
fastboot flash recovery recovery-clockwork-touch-5.8.3.1-endeavoru_fixedadbusb.img
fastboot erase cache
enter recovery, the sdcard is auto-mounted, means that you can directly access the sdcard by connecting the usb cable to pc. Copy the ROM.zip or update.zip to sdcard.
step 17 : no need
step 18 : Install the ROM from update.zip in recovery

ckpv5 said:
step 10 : Download the latest recovery: http://xda.richardtrip.org/HTC/reco...kwork-touch-5.8.3.1-endeavoru_fixedadbusb.img
step 16 : In fastboot mode :
fastboot flash recovery recovery-clockwork-touch-5.8.3.1-endeavoru_fixedadbusb.img
fastboot erase cache
enter recovery, the sdcard is auto-mounted, means that you can directly access the sdcard by connecting the usb cable to pc. Copy the ROM.zip or update.zip to sdcard.
step 17 : no need
step 18 : Install the ROM from update.zip in recovery
Click to expand...
Click to collapse
thanks! i've already added this info

still not working
first of all; thanks for this thread, this was what i was looking for. (I have a clean One X, with no rom on my sd card or something installed.)
I followed your steps -still breathing and smiling too, but i get stuck @ step 17 Cmd gives me an error: device not found. What am i doing wrong?
thanks in advance,
San
edit:
when the phone is off i get:
C:\Android>adb devices
List of devices attached
HT23KW103963 recovery
and when i turn the phone on in fastboot USB mode i get:
C:\Android>adb devices
List of devices attached

snowflakesan said:
first of all; thanks for this thread, this was what i was looking for. (I have a clean One X, with no rom on my sd card or something installed.)
I followed your steps -still breathing and smiling too, but i get stuck @ step 17 Cmd gives me an error: device not found. What am i doing wrong?
thanks in advance,
San
edit:
when the phone is off i get:
C:\Android>adb devices
List of devices attached
HT23KW103963 recovery
and when i turn the phone on in fastboot USB mode i get:
C:\Android>adb devices
List of devices attached
Click to expand...
Click to collapse
there's a quoted instruction @ page 1...
AS PER ckpv5 there's some changes to this new recovery, see below:
Originally Posted by ckpv5
step 10 : Download the latest recovery: http://xda.richardtrip.org/HTC/recov...ixedadbusb.img
step 16 : In fastboot mode :
fastboot flash recovery recovery-clockwork-touch-5.8.3.1-endeavoru_fixedadbusb.img
fastboot erase cache
enter recovery, the sdcard is auto-mounted, means that you can directly access the sdcard by connecting the usb cable to pc. Copy the ROM.zip or update.zip to sdcard.
step 17 : no need
step 18 : Install the ROM from update.zip in recovery

argh, it was kinda late, so i must have missed that part
Working like a charm now, thanks man!

snowflakesan said:
argh, it was kinda late, so i must have missed that part
Working like a charm now, thanks man!
Click to expand...
Click to collapse
good for you buddy! enjoy

mikey0105 said:
Yes, there are tutorials out there on how to recover from total disaster, which is really useful. I've actually used those last month to recover from HTC BOOT SCREEN logo, but i can still see a couple of folks out there who can't get out of the problem...
This guide will be helpful to those who don't have back-up on their CWM and no ROM saved on their SD card
I'm doing this guide to at least minimize the confusions or the need in posting on how to FIX their phone, i checked the STICKY threads and there's no clear guide on how to do it VIA "CMD", all information below are gathered around the web, xda forums, and some from my experience, thanks to them
I'm just trying to help out and make things easier.
If this thread helped you with your problem, you can always HIT THANKS & RATE above and to the posts that I linked here
HERE'S HOW:
1. Turn off then plug your device, and wait till it says "Device Connected" on your task bar
2. NOW we need to check if you have the driver installed for you're device, just simply right click the "My Computer>Properties>Device Manager"
3. If there will be an EXCLAMATION MARK or QUESTION MARK (not sure of the two) on your HTC device, you need to download the correct driver
4 go here and download the correct driver
5. Once Downloaded, go back to Device Manager, Right click your connected device with Exclamation/Question mark, then choose Update Driver>Browse Files>Select your downloaded driver, once finished. you can close those windows and proceed to next step.
6. Create a New Folder into your drive C:, rename it "fastboot"
7. Download fastboot files here, extract>copy all extracted files to the fastboot folder that you've just created.
8. Now, we need to make sure that the ADB inside the fastboot folder that we created is working, on how to check? go here
9. This is important, BREATHE, RELAX, and SMILE Now to the next step....
10. We need to download the CWM here, just choose the latest unofficial test recovery with USB issues fixed and automount and any ROM that you like here
11. After downloading, we must rename the ROM to update.zip and CWM to recovery.img
12. Extract the ROM and get the boot.img inside
13. COPY boot.img, update.zip and recovery.img to fastboot folder
14. Put your phone into fastboot mode with unlocked bootloader
15. Flash boot with command "fastboot flash boot boot.img"
16. After flashing, Boot recovery using "fastboot flash recovery recovery.img" command
17. After flashing recovery.img, use command "adb push update.zip /sdcard/update.zip" to send the ROM to phone, just be patient, it might not respond for a couple of minutes since the ROM file is big which is usually 500mb,
AS PER ckpv5 there's some changes to this new recovery, see below:
18. Install the ROM from update.zip in recovery
19. Reboot your phone and everything should be working again, just be patient with the first reboot, it might take some time to open
20. If still stuck? go back to fastboot usb, type this command to CMD, "fastboot erase cache" then "fastboot reboot-bootloader"
21. That's all, enjoy your One X again
*******************************************
NOTE:
- If step 17 is not happening, just don't rename the ROM file to update.zip, leave as it is, and use this command instead, "adb push update.zip /sdcard/EXACT NAME OF THE ROM.zip"
*******************************************
COMMON QUESTIONS OF THE NEWBIES:
How to enter fastboot?
- Hold down POWER BUTTON + VOLUME DOWN, wait for atleast 3-5 seconds
How to open CMD?
- Simply click the Start button of your PC, you should see there CMD or COMMAND PROMPT or you can TYPE CMD in the search panel and hit Enter
How can i open the fastboot folder via CMD?
- Once CMD is open, type "cd c:\fastboot" hit enter, then you can enter the commands, use c:\ if fastboot files is located in your drive c, d:\ if located in your drive d...
*******************************************
You can also go to this STICKY THREAD for additional reference.
If i missed something, please feel free to comment, much appreciated
That's All, hope it helps.. Have a Good Day!
Click to expand...
Click to collapse
16 don't make sense. Think you meant flash recovery not boot.
(at the recovery part ).

Just used this method to dig myself out of a whole I stupidly dug for myself.
Top work!
---------- Post added at 01:33 PM ---------- Previous post was at 01:26 PM ----------
This thread should really be stickied or some such. perfect for n00bs who've done silly things...

I hope you can help me. I thought I was having the same problem as snowflakesan, but I've tried these steps and I can't get into CWM. I've tried flashing every version I can find of clockworkmod, 5.8.3.1, the fixedadbusb version of 5.8.3.1, and 5.8.4.0. Each time I get stuck on the HTC screen with a message at the bottom saying
"This build is for development purposes only. Do not distribute outside of HTC without HTC's written permission. Failure to comply may lead to legal action."
I can flash TWRP v2.1.7, but not CWM. TWRP seems to work fine except that I can't transfer any files to the sdcard from TWRP because adb says "device not found."
Any ideas on what to try next?

have you installed the drivers for your computer? try and follow the steps carefully from number 1, you might have missed something?

wile i am try to update anything over cmd i am getting following messeg on cmd error: device not found.
and i have correctly installed the driver files too
can you help on this please

Didn't work
I had an one x that was stuck at boot screen. I installed the clockwork 5.8.4.0 and cleaned cache (both through fastboot) but now when i try to load the new recovery the phone just keeps rebooting. I load bootloader, choose recovery and then it just keeps restaring...what do you think could be the problem?
Thanks again for all your help. It is much appreciated.

[RECOVERIES & ROOT] Yureka custom recoveries & Root without Changing Stock Recovery

[RECOVERIES & ROOT] Yureka custom recoveries & Root without Changing Stock Recovery
Note : This tutorial is for YU Yureka based on CM11 (KK 4.4.4) 32bit architecture
and
do it on your own risk, I will not be responsible if you brick your phone
Here is the detailed guide and collection of stock and all custom recoveries for YU Yureka and detailed guide to Root YU Yureka without changing Stock Recovery
Requirements
1. YU Yureka (obviously) with USB Data cable
2. PC / Laptop (Having Windows installed at least Windows 7 or above)
3. Drivers (Windows Automatically detect and install the required drivers)
4. ADB & Fastboot binary package that can be downloaded from XDA 15 seconds ADB Installer v1.4.2']http://forum.xda-developers.com/showthread.php?t=2588979
5. Custom Recovery (Anyone in which you are interested CWM, PhiZ, TWRP)
6. Latest SuperSU.zip file to root your phone
Warning: This process may delete all data stored in internal storage so better backup all the files stored in internal storage.
Step One
Enable USB Debugging on your device you can just follow these steps:
Go to Settings> About phone and keep taping on build number at least 7 times or till it appears "You are a developer now",
Now again go to settings>developer option (only after the previous step it will be enabled)> check/select USB debugging.
Step Two
Unlock your bootloader to flash custom recovery and root.
Here is the process
1. Download the adb & fastboot binary package and install it.
2. Put your phone into FASTBOOT mode by following anyone from below methods :
Method 1 (easiest)
-------------------
a. Power down phone
b. Plug USB cable to your PC
c. Press and hold Vol Up button and plug other end of USB to your device, soon you will see the fastboot screen.
(or without plugging USB Cable, Press and Hold Power and Vol Up buttons simultaneously, until you see the screen
"FASTBOOT MODE"
Method 2
---------
a. While your phone is Power On, plug USB Data Cable with PC and Phone (USB Debuging must be Enable)
b. Open Command Prompt on your PC (with Administartor rights) and type the following command
adb -s 0x1ebf devices
You will get results something like that :
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
3a289c2 device
*Note : If you get "authorization message" then look on your mobile screen and authorize your PC and run the command again.
c. Now note down the device no. (for e.g. in above "3a289c2") and type the following command
adb -s 3a289c2 reboot bootloader
[*Note replace the device id with your id (here 3a289c2), that you got in last command]
Now your phone must be booted into fastboot mode. A screen with "Fastboot Mode" should be appear on your phone.
3. Device drivers will get installed by windows (please wait for the driver installation to complete)
4. After driver installation is done go to the folder where you have extracted the package
5. Now open elevated DOS command prompt (terminal) on your PC and go into the same folder where you saved the recovery file
(*Note : to start command prompt directly from desired folder, while holding the Shift Key Right Click on folder and select start "open command window here")
6. Type the following command to check if the device was detected in fastboot mode
fastboot -i 0x1ebf devices
you should get output like : 2a25d00 fastboot
if you don't get similar output it means that the drivers weren't correctly installed or the device wasn't connected properly
7. If the output is similar to above then run the following command:
fastboot -i 0x1ebf oem unlock
you should get output something like :
.....
OKAY [ 0.003s]
finished. total time: 0.004s
8. Now your bootloader is now unlocked.
*Note : if you want to re-lock your bootloader again (for warranty on any other reason), again boot into fastboot mode and this time type the following command and enter
fastboot -i 0x1ebf oem lock
Step Three
Boot your phone into recovery (temporarily or permanently) and root your phone
1. Download SuperSU.zip and put it on root of your internal or external SD card
2. To load custom recovery (CWM / TWRP / PhiZ) temporarily, now type this command in terminal :
fastboot -i 0x1ebf boot CWM_6.0.5.1_recovery-yu.img
*Note 1 : if you want to flash the custom recovery permanently then us the following command
fastboot -i 0x1ebf flash CWM_6.0.5.1_recovery-yu.img
*Note 2 : if your download custom recovery is named differently (here CWM_6.0.5.1_recovery-yu.img) then while writing the above commands you need to put the name of the recovery same as as your saved file name (anyone CWM / Phiz / TWRP)
3. Done ! You loaded custom recovery temporarily, if command used with "boot" hence to root your phone, proceed to next section (step 5).
or
If you flashed recovery permanently, using command with "flash" then boot your phone into recovery. To do so, you have Two options
i) type the following command and press enter : adb -s 3a289c2 reboot recovery
or
ii) power off your phone, after then press and hold "Vol up+ Vol down + Power" buttons simultaneously to boot into custom recovery.
Now to root your phone proceed with next section (step 5).
Root your phone
5. To gain root access, flash SuperSu.zip that is stored on your internal or external SD card (in step 1)
6. Choose reboot phone and enjoy rooted phone with stock or custom recovery !
Special Note 1
I didn't tested, but came to know that root doesn't effect OTA update on Yureka.
You can get OTA updates with root but after the OTA update is flashed you will loose root access. To keep it or to avoid this please go to System Settings -> Developer Options -> UNTICK -"Update CM Recovery" (update recovery while installing system updates)
Even though if someone want to go back to Stock recovery, then download the official stock recovery (link no. 6 above) and flash it using command in fastboot mode (second command in step 2 under head "STEP THREE")
Downloads
1. 15 seconds ADB Installer v1.4.2 http://forum.xda-developers.com/showthread.php?t=2588979
2. Super SU latest v2.46 http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
3. CWM 6.0.5.1 https://s.basketbuild.com/devs/vishal_android_freak/yu/yureka
OR http://d-h.st/ElAe
4. PhilZTouch 6.59 based on CWM v6.0.5.1 http://www.androiddevs.net/downloads/
OR http://d-h.st/UqWK
5. TWRP 2.8.5.0 http://techerrata.com/browse/twrp2/tomato
OR https://www.androidfilehost.com/?fid=95916177934528156
OR http://d-h.st/5wDD
6. YU Yureka Official Stock Recovery http://d-h.st/tQ1k
Special Note 2
Without the vendor id, phone will not get detected in fastboot mode.
Like if you want to check fastboot type this :
fastboot -i 0x1ebf devices
therefore, always add "i -0x1ebf" after fastboot and then write your command

aabidhashmi said:
Here is is collection of all custom recoveries for YU Yureka and detailed guide to Root YU Yureka without changing Stock Recovery
Requirements
1. YU Yureka (obviously) with USB Data cable
2. PC / Laptop (Having Windows installed at least Windows 7 or above)
3. Drivers (Windows Automatically detect and install the required drivers)
4. ADB & Fastboot binary package that can be downloaded from XDA 15 seconds ADB Installer v1.4.2']http://forum.xda-developers.com/showthread.php?t=2588979
5. Custom Recovery (Anyone in which you are interested CWM, PhiZ, TWRP)
6. Latest SuperSU.zip file to root your phone
Warning: This process may delete all data stored in internal storage so better backup all the files stored in internal storage.
Step One
Enable USB Debugging on your device you can just follow these steps:
Go to Settings> About phone and keep taping on build number at least 7 times or till it appears "You are a developer now",
Now again go to settings>developer option (only after the previous step it will be enabled)> check/select USB debugging.
Step Two
Unlock your bootloader to flash custom recovery and root.
Here is the process
1. Download the adb & fastboot binary package and install it.
2. Power down phone
3. Plug USB cable to your PC
4. Press and hold Vol Up button and plug other end of USB to your device, soon you will see the fastboot screen.
(or without plugging USB Cable, Press and Hold Power and Vol Up buttons simultaneously, until you see the screen
"FASTBOOT MODE"
5. Device drivers will get installed by windows (please wait for the driver installation to complete)
6. After driver installation is done go to the folder where you have extracted the package
7. Now open elevated DOS command prompt (terminal) on your PC and go into the same folder where you saved the recovery file
* to start command prompt directly from desired folder, while holding the Shift Key Right Click on folder and select start "open command window here"
8. Type the following command to check if the device was detected in fastboot mode
fastboot -i 0x1ebf devices
you should get output like : 2a25d00 fastboot
if you don't get similar output it means that the drivers weren't correctly installed or the device wasn't connected properly
9. If the output is similar to above then run the following command:
fastboot -i 0x1ebf oem unlock
you should get output something like :
.....
OKAY [ 0.003s]
finished. total time: 0.004s
10. Now your bootloader is now unlocked.
Step Three
Root your phone without changing your stock recovery
1. Download SuperSU.zip and put it on root of your internal or external SD card
2. To load custom recovery (CWM / TWRP / PhiZ) temporarily, now type this command in terminal :
fastboot -i 0x1ebf boot recovery CWM_6.0.5.1_recovery-yu.img
*Note : if your download custom recovery is named differently (here CWM_6.0.5.1_recovery-yu.img) then while writing the above command you need to put the name of the recovery same as as your saved file name (anyone CWM / Phiz / TWRP)
Done ! You flashed custom recovery temporarily.
3. Now press and hold "Vol up+ Vol down + Power" buttons simultaneously to boot into custom recovery.
4. To gain root access flash SuperSu.zip that is stored on your internal or external SD card (in step 1)
5. Choose reboot phone and enjoy rooted phone without changing stock recovery !
Downloads
1. 15 seconds ADB Installer v1.4.2 http://forum.xda-developers.com/showthread.php?t=2588979
2. Super SU latest v2.46 http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
3. CWM 6.0.5.1 https://s.basketbuild.com/devs/vishal_android_freak/yu/yureka
OR http://d-h.st/ElAe
4. PhilZTouch 6.59 based on CWM v6.0.5.1 http://www.androiddevs.net/downloads/
OR http://d-h.st/UqWK
5. TWRP 2.8.5.0 http://techerrata.com/browse/twrp2/tomato
OR https://www.androidfilehost.com/?fid=95916177934528156
OR http://d-h.st/5wDD
Special Note
Without the vendor id, phone will not get detected in fastboot mode.
Like if you want to check fastboot type this :
fastboot -i 0x1ebf devices
therefore, always add "i -0x1ebf" after fastboot and then write your command
Click to expand...
Click to collapse
Few errors noted:
1. You can't say flashing recovery when you are booting it.
2. In step 3 point 3 is not valid because when your command is to boot it will automatically boot into recovery you need not use combination keys.
3. Last point vender id is wrong !!!
Few suggestions:
1. It feels like you have not tested this by yourself
2. There is already a guide for "rooting without flashing recovery". Search before posting.
Regards
aashking

aashking said:
Few errors noted:
1. You can't say flashing recovery when you are booting it.
2. In step 3 point 3 is not valid because when your command is to boot it will automatically boot into recovery you need not use combination keys.
3. Last point vender id is wrong !!!
Few suggestions:
1. It feels like you have not tested this by yourself
2. There is already a guide for "rooting without flashing recovery". Search before posting.
Regards
aashking
Click to expand...
Click to collapse
Dear aaskking
Thanks to inform. Here is the corrections
1 & 2 - Tutorial updated with "boot" and "flash" commands separately.
3 + Vendor ID is correct nothing wrong in it.
4 - I already tested all those procedures and commands. I never post anything without testing.
5 - Yes, I also seen that available guide, but that is not so much detailed and also required files links are not provided.
Anyway, thanks for your suggestions.

aabidhashmi said:
Dear aaskking
Thanks to inform. Here is the corrections
1 & 2 - Tutorial updated with "boot" and "flash" commands separately.
3 + Vendor ID is correct nothing wrong in it.
4 - I already tested all those procedures and commands. I never post anything without testing.
5 - Yes, I also seen that available guide, but that is not so much detailed and also required files links are not provided.
Anyway, thanks for your suggestions.
Click to expand...
Click to collapse
EDIT : You can get OTA updates with root..
After the update is flashed you will loose root access ..
To keep it or to avoid this please write the following step
STEP) In Developer Option UNTICK -"Update CM Recovery".
That's it.. Cheers mate wonderful thread.. @aabidhashmi @aashking

arjunsingh1000 said:
EDIT : You can get OTA updates with root..
After the update is flashed you will loose root access ..
To keep it or to avoid this please write the following step
STEP) In Developer Option UNTICK -"Update CM Recovery".
That's it.. Cheers mate wonderful thread.. @aabidhashmi @aashking
Click to expand...
Click to collapse
Thanks Arjun Singh @arjunsingh1000 for suggestion and appreciation
Post updated ...

aabidhashmi said:
Thanks Arjun Singh @arjunsingh1000 for suggestion and appreciation
Post updated ...
Click to expand...
Click to collapse
Great mate cheers just checked and tried that ota updates are available and work.. On stock recovery... Locked bootloader and with root..
Achieved this by downgrading to the very first cm11 firmware and got then rooted it and locked the bootloader then I just booted it and got the incremental update .. Downloaded and flashed .. Works perfectly.. Root not lost due to the untick in dev options..

Thanks again Arjun Singh, for confirming OTA updates are working.
I am already on Stock ROM & recovery {rooted} and tried the same procedure {locked the bootloader}, but no updates for me.
Is updates are really there, or something wrong with me ?
Sent from my AO5510 using Tapatalk

I am simply unable to get the device listed in command prompt after fastboot mode is enabled. my phone has option to boot into fastboot mode in power options. i tried that option, i tried using command to boot into fastboot. But somehow, when phone is in fastboot mode, it does not get detected by fastboot application (even though windows installs drivers successfully).
I have tried 3 different laptops. All had same problem. No idea how to solve this.

aabidhashmi said:
Thanks again Arjun Singh, for confirming OTA updates are working.
I am already on Stock ROM & recovery {rooted} and tried the same procedure {locked the bootloader}, but no updates for me.
Is updates are really there, or something wrong with me ?
Sent from my AO5510 using Tapatalk
Click to expand...
Click to collapse
Well I guess you are on the latest build XN0PHQ I guess? Another beta update was made but not rolled out it is um XNPH08P I know its a little late but just in case you don't know..
---------- Post added at 05:30 PM ---------- Previous post was at 05:28 PM ----------
jitendragarg said:
I am simply unable to get the device listed in command prompt after fastboot mode is enabled. my phone has option to boot into fastboot mode in power options. i tried that option, i tried using command to boot into fastboot. But somehow, when phone is in fastboot mode, it does not get detected by fastboot application (even though windows installs drivers successfully).
I have tried 3 different laptops. All had same problem. No idea how to solve this.
Click to expand...
Click to collapse
Ahahahaah... I know just the way... Do not reboot via adb ...
Switch off your phone remove your battery and put it back in do not turn it on.. But connect your USB cable and at the same time hold the power up or maybe down button .. Voila your in fastboot which will get detected .. Don't forget to use the vendor id.

arjunsingh1000 said:
Ahahahaah... I know just the way... Do not reboot via adb ...
Switch off your phone remove your battery and put it back in do not turn it on.. But connect your USB cable and at the same time hold the power up or maybe down button .. Voila your in fastboot which will get detected .. Don't forget to use the vendor id.
Click to expand...
Click to collapse
I tried this method but phone does not get detected in fastboot mode at all. I have drivers installed for all different modes I connect my phone as. No luck at all.
Also, weird thing is, I have an option to directly go to fastboot mode from the power menu.

Jitendra Garg
Your driver's are not installed
As there is no special drivers setup, so connect your PC with Internet then plug your phone and let Windows install drivers automatically.
Sent from my AO5510 using Tapatalk

[root] redmi 4x root

Firstly this is my first helpful post so be gentle.
How to root the Redmi 4x
First off I am not accountable if your fry your device or shut down the power grid etc.
Alright. It took me some research and trial and error but I found the CORRECT way to root the Redmi 4x.
Needed files:
Lasted version of the magisk zip. DO NOT USE ANY VERSION OF SUPER SU. IT CAUSES BOOTLOOP.
TWRP for Redmi 4x
Lazy patcher.
Adb and fastboot files.
Step one:
Ensure your bootloader is unlocked. If not search XDA for a thread there are multiple threads showing you how to do it. Once that's done let's move on.
Step 2:
Alright let's get going with flashing TWRP first.
You need to enable developer options and enable USB debugging on your Redmi. To do that go to settings>about devices>scroll down>continually tap on MIUI version and a toast notification will tell you that you are now a developer>go to developer option under the more options tab and enable USB debugging.
Step 3:
Now that we've got USB debugging we can connect to Adb. Firstly download all aforementioned files and place them in the same folder as your Adb installation for ease of access. Now open up a command prompt in that folder by either typing "cmd" into the address bar or shift+right click and select open command window here. Now you need to connect your phone via USB to your computer and ensure it is connected by entering "adb devices" into the command window.
Step 4: commands
Here are the commands you will need to enter. I recommend making a backup of everything first.
Enter these commands
adb reboot bootloader
Fastboot flash recovery (put TWRPS full file name here including the .zip)
Wait for it to finish.
Now DO NOT BOOT TO SYSTEM.
Enter in fastboot reboot and hold volume up to enter recovery. If you boot to system it will remove twrp and you will have to reflash it.
Once in Twrp check the box to allow modifications and slide right.
Go to advanced and the ADB sideboard.
Now flashing magisk and lazy patcher.
Reconnect your phone to the computer and leave Twrp on sideload mode.
Enter this command
adb sideload (lazy patchers full file name here)
Now I made sure my phone still booted to system after this because every time I flashed SuperSU it would boot loop.
Once your back in sideload mode let's flash magisk.
adb sideload (magisks full file name here).
Once it's done select reboot to system from Twrp and enjoy your root!!
Again I say do not use any flashable root other than magisk. I don't know if I had a specific problem but every single one I tried resulted in bootloop.

Id like to beg for help with rooting my RN 8 Pro

Basically I have rooted my old Redmi Note 4 but that was past guarantee so I did not care that much.
My current RN 8 Pro is still 1 year in guarantee so I literally do not have the balls to do it on my own.
Is there any good soul who would help me out with rooting it, pretty please? Thanks very much in advance
btw. I do know stuff about Unlocking Boot Loader, installing TWRP trough Command Window and Flashing Magisk...that should be potentially enough but as I said above no balls and do not want to F things up and brick it.

Redmi Note 8 Pro Guide [Firmwares | ROOT CN/GLOBAL | TWRP Recovery]
Redmi Note 8 Pro [Begonia] [Global Version Only] WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are risking voiding your warranty! I am NOT...
forum.xda-developers.com
A great guide is here :3
Not sure you need my help for that but yeah if ya run into any problems, ill be here to help ya

Ty for responding. I read that but Im still not sure about what TWRP use on my phone (im not sure if i have to use special one or just latest version) and because I want to only root my phone Im also not sure, if I need to get a different ROM or I can do that on this STOCK ONE I have.
I bought my RN 8 Pro in EU. Im gonna try to give you more information about my phone, if you would be able to link me TWRP what I need and other files to root it...that would be awesome (its not like i cant read or im lazy f**k, its more like i dont want to F things up).
Version of MIUI: MIUI Global 12.0.5; Stable 12.05.0(QGGEUXM)
Version of Android: 10 QP1A. 190711.020
Android Level of Security: 2021-04-01
Thank you very much

1. UNLOCKING BOOTLOADER :
- Download the Mi Unlock app to PC, and sign in with your Mi Account;
- Enable Developer Option in your phone by tapping the "Build Number" 7 times
- Go to Developer Options "Settings > Additional Settings > Developer Options
- Enable USB Debugging and OEM Unlocking
- Aslo add account in Mi Unlock Status (Can be found in Developer Options
- Install all the required drivers (adb drivers, vcom drivers etc.) In your PC [I'll link these below]
- Shut down your phone manually, and hold Volume down key and Power button to enter Fastboot mode
- Connect your phone to PC using USB cable and click "Unlock". In Mi Unlock Tool
- You will be given a specific time (168 hours mostly)
- Wait until that and redo Unlock process
- Your device’s bootloader is unlocked
2. FLASHING TWRP :
- Install Minimal ADB and fastboot on your PC [Link will be provided below]
- Download LR Team TWRP [This work for now, I'll provide link below and will update it after we have another proper TWRP]
- Put that TWRP in the file location of ADB and Fastboot (Right click on Minimal ADB and Fastboot icon on desktop and click on Open file location)
- rename that recovery to "twrp" for convenience (optional)
- Now Connect your phone to PC With USB Debugging on (keep phone on).
- Type
Code:
adb devices
and accept the pop up on phone's screen.
- Now reboot your phone to Fastboot mode
- Type
Code:
fastboot devices
- Your device ID will be visible on Screen.
- Then type
Code:
fastboot flash recovery twrp.img
- When it's done, Remove cable and Hold Power + Vol. Up when phone starts turning on leave the power button but keep pressing Vol. UP until TWRP splash Screen shows up.
- Done
3. ROOTING :
- In TWRP mount System
- Go to Advanced > file manager
- then go to system_root > system and delete "recovery-from-boot.p"
- Go home and again go to advanced and Select "Close AVB2.0" swipe to confirm.
- Go back and select "Install Root"
- Here you go magisk 19.4 will be installed (U can chose any other versions afterwards.)
- Reboot the device to system.
- Done!
LINKS
1. Mi Unlock tool
2. Minimal ADB and Fastboot
3. ADB Drivers for MTK
4. MTK USB Drivers
5. LR Team TWRP

Hello once again...I might need some help
I was following these steps but after flashing this TWRP I cant enter into the TWRP...so far Ive tried holding power button then pressing Volume +; holding power button and then holding Volume+; even holding them both but still without any result...any chance you might help me here, please?
*EDIT: Im flashing stock ROM

Go to the system then do
adb reboot recovery

I flashed TWRP recovery once again, then I went for "adb reboot recovery". This is what happened after I used "adb reboot recovery" (attached picture). There is no sign about TWRP. What am I doing wrong? I literally followed the guide the flash of the recovery TWRP is successful. Is there any chance that Im flashing wrong TWRP recovery? Or that Im doing it on stock ROM? Usually its problem between chair and keyboard but I dont know :-/.

So Ive tried to boot TWRP through after flashing it with "fastboot boot twrp.img". It went through but it booted like normal so I ended up in system like when you turn on your phone normally.

Anybody, anything please?

N00B92 said:
Anybody, anything please?
Click to expand...
Click to collapse
First: what version of miui?
If you're on miui 12.5 this method will cause reboot.
If your phone is < 12.0.X its okay.
It looks like flashing recovery worked.
Instead of trying to adb reboot recovery after flashing recovery try this:
- When it's done, Remove cable and Hold Power + Vol. Up when phone starts turning on leave the power button but keep pressing Vol. UP until TWRP splash Screen shows up.

Version of MIUI: MIUI Global 12.0.5; Stable 12.05.0(QGGEUXM)
Version of Android: 10 QP1A. 190711.020
Android Level of Security: 2021-04-01
I was already trying that, if I do it how you typed the screen is gonna keep blinking with MIUI logo.

I was looking for the answers and I found smth about "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable android verified boot, but dunno if its my case on stock ROM or not.

N00B92 said:
I was looking for the answers and I found smth about "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable android verified boot, but dunno if its my case on stock ROM or not.
Click to expand...
Click to collapse
First you need to enter recovery, i think you didn't flash boot.
Follow the method below exactly.
Original post and files can be found here.
If error occurs..
1. Go to Minimal ADB and Fastboot in C: of your PC. Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
2. Enter the following commands: fastboot flash boot boot.img and Enter then fastboot flash recovery recovery.img and Enter. We have flashed clean boot and TWRP.
3. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. The recovery_fromboot.p file is already deleted earlier.
5. Go to Mount in TWRP check data, system, vendor, nvdata and now you can decrypt DATA by formatting in TWRP Wipe-Fotmat Data, write yes and swipe.
6. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.

I dont have any boot.img in my folder so I cant flash the boot.img. Having stock ROM and I have no clue where to get it.

My current ROM is MIUI Global 12.0.5; Stable 12.05.0 (QGGEUXM) and I think I just found it here on this link:
https://xiaomifirmwareupdater.com/miui/begonia/stable/V12.0.5.0.QGGEUXM/
Can anybody experience confirm that Im suppose to copy out the boot.img out of it and then copy&paste it into Minimal ADB and Fastboot in C: of my PC and then going for the "fastboot flash boot boot.img" as the last msg from Donkyshot says?
Tyvm

Id appreciate any help
Everything I did try is above.

N00B92 said:
My current ROM is MIUI Global 12.0.5; Stable 12.05.0 (QGGEUXM) and I think I just found it here on this link:
https://xiaomifirmwareupdater.com/miui/begonia/stable/V12.0.5.0.QGGEUXM/
Can anybody experience confirm that Im suppose to copy out the boot.img out of it and then copy&paste it into Minimal ADB and Fastboot in C: of my PC and then going for the "fastboot flash boot boot.img" as the last msg from Donkyshot says?
Tyvm
Click to expand...
Click to collapse
madsponge26 said:
Redmi Note 8 Pro
[Begonia]
[Global Version Only]​
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are risking voiding your warranty! I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
Firmwares
Global Stable
V10.4.1.0.PGGMIXM
V10.4.2.0 to V11.0.10
V11.0.1.0 PGGMIXM
V11.0.3.0 PGGMIXM
V11.0.4.0 PGGMIXM
V11.0.6.0
China Stable
V10.4.4.0.PGGCNXM
V10.4.6.0.PGGCNXM
V10.4.8.0.PGGCNXM
V10.4.9.0.PGGCNXM
V10.4.10.0.PGGCNXM
V10.4.11.0.PGGCNXM
V11.0.1.0QGGCNXM
China Beta
V9.9.25
V9.10.17
India Stable
V10.4.3.0.PGGINXM
V11.0.1.0 PGGINXM
Europe (EEA)
V10.4.5.0.PGGEUXM
Indonesia
V10.4.2.0.PGGIDXM
V11.0.1.0PGGIDXM
Russia
V10.4.2.0.PGGRUXM
USB Drivers
Download
Unlock Bootloader
Enable OEM Unlocking
Unlock Here
Installing TWRP Recovery and ROOT
Enable USB Debugging - Goto Settings / Additional settings / Developer options / USB Debugging & USB debugging (Security settings) - Enable (If you have not activated Developer options, then Goto Settings / About phone / tap MIUI version 7 times - now developer options enabled.
Global Version
GLOBAL firmware V10.4.5.0.PGGEUXM only
Drivers installed properly
Enabled USB Debugging (enabled developers menu)
1. Turn Off
2. Go to Fastboot mode (Volume - + Power)
3. Connect to the PC
4. Download and extract in C drive, "Run as administrator" and execute "ifelixit+FLASHER+TOOLKIT+Begonia.bat".
5. Choose 1 (TWRP recovery) and enter or Choose 2 (Root Only)
Immediately disconnect the phone from the PC, otherwise it will go to reboot on command and the stock recovery will be restored.
6. Put the Minimal ADB and Fastboot in C: of your PC.
Transfer the Recovery.img in Fastboot folder
Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
7. Type fastboot flash recovery recovery.img and enter (TWRP will be installed)
8. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
Stock boot IMG for V10.4.5.0.PGGEUXM just in case bootloop
TWRP for Begonia
If error occurs..
1. Go to Minimal ADB and Fastboot in C: of your PC. Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
2. Enter the following commands: fastboot flash boot boot.img and Enter then fastboot flash recovery recovery.img and Enter. We have flashed clean boot and TWRP.
3. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. The recovery_fromboot.p file is already deleted earlier.
5. Go to Mount in TWRP check data, system, vendor, nvdata and now you can decrypt DATA by formatting in TWRP Wipe-Fotmat Data, write yes and swipe.
6. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
Proof of Video that Redmi Note 8 Pro Rooted
Contributors
Nikas
esleer
Xakep1993
SPIRITic
m3lbrunton
Lyelik74
@topjohnwu
TWRP Community
XDA Community
Xiaomi Community
Click to expand...
Click to collapse
Well look here.
This is the original post the person above put soooo
Yeah the boot.img is in there.

Kenora_I said:
Well look here.
This is the original post the person above put soooo
Yeah the boot.img is in there.
Click to expand...
Click to collapse
Thanks. I used the boot.img and I was following the guide which "donkyshot" sent. But I got stucked right after I did those commands in command Window. I disconnected the phone went for the power button hold and then when it was blank I stopped holding power button and I started holding the Volume+ button. The phone was bootlooped on Xiaomi logo...I was waiting several times but nothing. At the end I had to flash the phone with stock ROM I downloaded through MiFlash...I really dont know what I was doing wrong.

Oppo A83 [CPH1729] TWRP RECOVERY

⚠Warning: This is not official TWRP, use it at your own risk!!!
Data will be erased. Back up if neccessary
This device is kind of weird so to flash twrp you need these things:
1. Prepare materials​
Install driver so as to have access to preloader (Just install automatically and no need to do anything in device manager)
This software to access to preloader -> fastboot (fastboot is somehow not available via adb methods) Enter fastboot
This tool for flashing
2. Unlock bootloader (need testpoint, python, git (optional) - you can search on google)​
Use this tool - go to this section. Follow guides to unlock bootloader (remember to use testpoint not hardware buttons)
3. Enter fastboot mode​
Use latest MTK META Ultility tool
Select Reboot Fastboot Mode in BRom section
Hold volume down button. While holding connect it to your computer
*Now your phone is in fastboot mode​4. Flash​
Open platform-tools folder in Downloads folder
Shift + Right click then "open command window here"
Input these commands into cmd
fastboot flash boot drag twrp file to cmd
fastboot flash recovery drag twrp file to cmd.
fastboot reboot. Swipe to allow modification in twrp (to make sure that stockboot wont replace twrp). After that reboot to recovery to make it installed on your device permanently.
Now your recovery is ready to flash file you can push stock image file to your root folder using adb command: "adb push. Drag the stock image file. /" (Because Decryption right now doesnt work on my device yet)
Enjoy
*Sounds crazy but it is required to make sure twrp is installed correctly​*If successful, when you power on, you will get a red section on top of your device. If you want to recover to stock recovery, flash the recovery.img below.​*Also, if you want to make your own twrp, you can try recovery.img below.​
Also thanks SebaUbuntu and Mofadal El-Tayeb (مُفَضَّل) for awesome apps
​
​​
​

Here is the PBRB version for this device

Hey I'm stuck in the third step.can you please help me?

Sorry for late reply. What problems do you have?

Is this the stock boot image you provided?

SAMIUL ISLAM 0 said:
Is this the stock boot image you provided?
Click to expand...
Click to collapse
Yes it is. I took it from OTA update

Hey friends
I want to upgrade my oppo a 83 fone to a costum rom to upgrade my androide to android 8 or higher

mahmoud2503 said:
Hey friends
I want to upgrade my oppo a 83 fone to a costum rom to upgrade my androide to android 8 or higher
Click to expand...
Click to collapse
Unfortunately, I have no custom roms available for this phone (