i hope im wrong but you cant use the xda aas a remote for tv etc (cif)?
try TV remote controller 5.5 from www.pdawin.com... works perfect with my thomson tv set and my spv m2000
website states
Note: iPAQ 19xx is not supported so far!
Note: XDA 2 is not supported so far!
You can use XDA II as remote for your TV tunner or Amp. Install Novi Remote new version and don't forget to enable IR beam in Settings menu.
Asim
installed tvremote did learn and noyhing, well it did lwearn just didnt send a signal. where would i change those settings for the beam
really want to get this up and running tonight, i have set the beam settings on the ppc to "receive all incoming beams". i have tv remote 5.5 installed and using the XDA IIs. any ideas????
ok done some research and the ir in the xda is weak due to not being Consumer ir. but it is still usable as a remote but just has a weaker signal giving you 1.5 - 3m range.
So i now placed the pda right up 2 the tv but still nothing... anyone have a link for novi, is novi nevo????
Hi. I use "total remote" from griffin technologies. This works very well as a remote controller (although the range is a little short).
The software records and plays back absolutely fine.
I couldn't get the hardware sender to work, I believe the new PDA2K has a different headphone design (??)
Baz
THOUGHT OF SOMETHING, I HAVE NOT INSTALLED THE 02 SOFTWARE could this be the reason why??
have tried : Total remote and tv remote controler 5.5
had some trouble with the macro in total remote. to record a signal from my tv remote to the pda you macro >strart recoding marco> then press channel 1 on pda followed by press the remote for 5 sec, then???
still not working, does the o2 cabs hold drivers or software
Apec said:
still not working, does the o2 cabs hold drivers or software
Click to expand...
Click to collapse
There is nothing in the O2 or WM2003 cabs which will help. The I/R system in the XDA devices is simply not compatible with domestic remotes (psuter was obviously lucky with his Thomson TV).
The only way over this is by using a hardware adapter from Griffin Total Remote, or wait for the planned SDIO adapter from NoviBlaster.
The Griffin Solution is a pain with the XDA II due to the siting, and size of the headphone socket.
In short does this mean that i will not be able to use the remote with exra hardware being plugged into the xda iis?
I have used an xda 1 and xda 2 with remote software, the range isnt great but it works, it also acts as learning remote with no problems.
c-t , can you remember which software you used? I'd love to get this working. Any advice gratefully received.
take a peek at this url I found
http://www.tekguru.co.uk/phpBB2/viewtopic.php?t=3583&view=next
So were pretty much agreed- we can use as remote control but only at a distance of around 1- 2m. s there a way of reconfiguring the hardware? If not is there some sort of sdio IR that we could use for remote control?
remote
i have been looking for Remote control...pls cud u send it to my [email protected]
hello guys...
just wondering if anyone of you tried google voice app on our tablet? i installed it but no luck on how to run it. i signed in my google account. but theres no way to find the dialer.
need some help thanks
Add GrooVe IP and you can have it dial with Google Voice.
Phone calls sometimes have an echo on the A100 unless you use a headset. But you still have to speak into the tablet's microphone as the headset input is "out" only.
I tested it out and it works, but it's pretty inconvenient to use a 7" tablet as a phone. (Unless you're using video Skype.)
thanks. ill try it out.
sorry but... what Google Voice does exactly? Is like another VoipCalls program?
What about bluetooth, is it audio playback only? I haven't tried yet as i don't have a need for it.
Sent from my rooted Acer Icona A100 using Tapatalk.
I tried thd grooveip i love it thanks
Sent from my rooted Acer Icona A100 using Tapatalk.
dms76 said:
I tried thd grooveip i love it thanks
Sent from my rooted Acer Icona A100 using Tapatalk.
Click to expand...
Click to collapse
bluetooth is audio only. headset worth built in mic should work. Google voice is for texting and voicemail. I have sprint so I can port my number to google voice for free which allows me to recieve all voicemail and texts on tablet. in combination with grooveip I can recieve and place calls. so an incoming cal rings on tab and phone.
Sent from my A100 using Tapatalk
Does anybody know if there is a version of the plain Jane voicedialer.apk app that will work with this phone? I don't like using s voice. If there isn't a version that works then is there some way to get the google now search to come up when pressing the button on the bluetooth headset? I would rather use that than s voice.
Hi All,
I want to have google voice search on my Chinese android TV box, but by default google voice search looks for internal microphone. As my android box doesn’t come with internal microphone, so I need to try either external usb microphone or with Bluetooth headset. I’ve tried a USB Microphone (approx. 5$), but it was with lot of noise and wasn’t picking up my voice clearly. (Voice is too low because of the noise from Microphones electronics).
I know it is possible to launch Google voice search by Bluetooth headset with some Bluetooth app. ( like Bluetooth Launch) I’ve seen some videos also on YouTube explaining how to do it but all are explaining with phone, not with android TV box.
I want to use Bluetooth headset ( preferred mono) for this and I want to use Bluetooth's microphone to send search commands to android tv box , and I want audio to be heard from my Samsung tv which is connected to tv box via HDMI not through Bluetooth headset speaker.
Is it possible to achieve?
Anybody managed to pair bluetooth keyboard with android TV ??? In my case TV can see the device but its not giving me pairing code (which is required by keyboard in order to pair) - so pairing always fails
keyboard: Cooler master SK621
TV: philips 55oled803
Solved
I finally managed to pair the devices. Looks like that in order to do that you just need some patience and initiate pairing mode on keyboard in the right moment ... then you will receive pairing code on TV and everything works ...