i hope im wrong but you cant use the xda aas a remote for tv etc (cif)?
try TV remote controller 5.5 from www.pdawin.com... works perfect with my thomson tv set and my spv m2000
website states
Note: iPAQ 19xx is not supported so far!
Note: XDA 2 is not supported so far!
You can use XDA II as remote for your TV tunner or Amp. Install Novi Remote new version and don't forget to enable IR beam in Settings menu.
Asim
installed tvremote did learn and noyhing, well it did lwearn just didnt send a signal. where would i change those settings for the beam
really want to get this up and running tonight, i have set the beam settings on the ppc to "receive all incoming beams". i have tv remote 5.5 installed and using the XDA IIs. any ideas????
ok done some research and the ir in the xda is weak due to not being Consumer ir. but it is still usable as a remote but just has a weaker signal giving you 1.5 - 3m range.
So i now placed the pda right up 2 the tv but still nothing... anyone have a link for novi, is novi nevo????
Hi. I use "total remote" from griffin technologies. This works very well as a remote controller (although the range is a little short).
The software records and plays back absolutely fine.
I couldn't get the hardware sender to work, I believe the new PDA2K has a different headphone design (??)
Baz
THOUGHT OF SOMETHING, I HAVE NOT INSTALLED THE 02 SOFTWARE could this be the reason why??
have tried : Total remote and tv remote controler 5.5
had some trouble with the macro in total remote. to record a signal from my tv remote to the pda you macro >strart recoding marco> then press channel 1 on pda followed by press the remote for 5 sec, then???
still not working, does the o2 cabs hold drivers or software
Apec said:
still not working, does the o2 cabs hold drivers or software
Click to expand...
Click to collapse
There is nothing in the O2 or WM2003 cabs which will help. The I/R system in the XDA devices is simply not compatible with domestic remotes (psuter was obviously lucky with his Thomson TV).
The only way over this is by using a hardware adapter from Griffin Total Remote, or wait for the planned SDIO adapter from NoviBlaster.
The Griffin Solution is a pain with the XDA II due to the siting, and size of the headphone socket.
In short does this mean that i will not be able to use the remote with exra hardware being plugged into the xda iis?
I have used an xda 1 and xda 2 with remote software, the range isnt great but it works, it also acts as learning remote with no problems.
c-t , can you remember which software you used? I'd love to get this working. Any advice gratefully received.
take a peek at this url I found
http://www.tekguru.co.uk/phpBB2/viewtopic.php?t=3583&view=next
So were pretty much agreed- we can use as remote control but only at a distance of around 1- 2m. s there a way of reconfiguring the hardware? If not is there some sort of sdio IR that we could use for remote control?
remote
i have been looking for Remote control...pls cud u send it to my [email protected]
Related
Hey Everyone,
Has anybody identified a good program for having "remote control" functionality with the Hermes? I was in a place with REALLY bad TV where I would have killed for the ability to change the f-ing channel.
Thanks!
Try NoviiRemote Deluxe!
ViktorX said:
Try NoviiRemote Deluxe!
Click to expand...
Click to collapse
Seconded, it's superb. Had to manually program all the codes in though myself, as it refused to work with preprogrammed ones.
Forget IR-Remote with Hermes. The IR-beam is too weak, has only max. 1 meter radius
Doesn't look like it is actively produced anymore (but you can still track it down - http://www.shentech.com/totalremote.html ) I've still got a Griffin Total Remote and it'd be interesting to see if it would work with the headphone adapter etc. Essentially it is software and a powerful IR adapter that converts audio signals from your headphone jack to IR signals...
it is weak but it is better than nothing. i am using it my tytn as remote controller for my dslr on trips
Je possède la PS3. La télécommande est bluetooth. Existe t-il un soft pour commander la PS3 avec nos PDA ?
***********
I have PS3. The remote control is bluetooth. Is there a soft to order PS3 with our PDA Artemis ?
I would be interested in the opposite - can you control your WM phone with the PS3 bluetooth remote, and can you do it while connected to another A2DP device which does not use the A2DP profile. e.g. the Motorola DC800
http://www.pocketnow.com/index.php?a=portal_detail&t=reviews&id=808
Surur
i'm with Zen, someone needs to develop an app to emulate the ps3 bluetooth remote control on wm5/6 pda.
agreed
I concur. This would be a great application.... do it up!
-cope
I agree! The perfect application for the windows mobile should allow you to use your PDA as bluetooth remote control and keyboard. It would make it a lot easier to use the PS3 chats or blu-ray movies, than the PS3 Sixaxis.
bump
i totally agree - anyone made any progress on this yet?!
Me too... would be an awesome app...
Or how about an app to use a PPC with a keyboard (Mogul\Titan, Tilt, Raphael, etc) as a BT keyboard...with the PS3...
this was my idea too.
Have sombody a prog for this?
I would be interested in this as well. I have been playing with the Gremote on my HTC touch HD and i can totally see this being usefull on my PS3 as well cause i hate having 10 remotes. I would be down to throw a lil coin in donations at this one to help out as well. You guys continue to amaze me with your work...Keep it up!
would be interested in it too.
maybe its possible to hack an usb bt stick and use it in combination:
pocket pc bluetooth stack <-> hacked usb widcomm bt stick <-> ps3 usb port
Nobody find ?
look at this: http://www.engadgetmobile.com/2009/01/10/unify4lifes-blackberry-products-demoed-at-ces/
hopefully someone can hack it for windows mobile
yep, i agree, that would be great.
It would be nice being able to use the keyboard on our phones to type messages on our ps3
http://pocketnow.com/index.php?a=portal_detail&t=news&id=6928
Tried the demo, and it works flawlessly on my laptop. On my PS3 it just keeps searching and I can't get them to pair...
Ive been searching for awhile and no remote for WinMo for the PS3. We need one
mobileSRC MobileRemote does one but I don't think that they have it working for the PS3 yet. Please can anyone get something like this working on the PS3 !!!!!!!!
this would be soooo coool. this is probably the first post that i have ever made LOL!
they now state Winremote is PS3 compatible I am just setting up will let you know how I get on. If this does indeed work my Wizard will be able to come out from the cupboard.
Yes it works in legacy mode.
Does somebody tried this soft ? : Mobile Remote 1.1
Hey guys in my searches i have found this little app. Theres an unlimited free trial available. it let's you connect any bluetooth mouse to your wm device. great app and would love to use a mouse in conjuction with my igo keyboard. I have tried pairing the mouse however it does not complete pairing and the mouse continues to sit in pairing mode. I have tried three seperate mice (logitech, targus and microsoft) If anyone is willing to give it a go and let me know how they go would be great.
Hopefully it will work for you.
http://www.teksoftco.com/index.php?section=blueinput
dlaponin said:
Hey guys in my searches i have found this little app. Theres an unlimited free trial available. it let's you connect any bluetooth mouse to your wm device. great app and would love to use a mouse in conjuction with my igo keyboard. I have tried pairing the mouse however it does not complete pairing and the mouse continues to sit in pairing mode. I have tried three seperate mice (logitech, targus and microsoft) If anyone is willing to give it a go and let me know how they go would be great.
Hopefully it will work for you.
http://www.teksoftco.com/index.php?section=blueinput
Click to expand...
Click to collapse
I used a Logitech V70 following the instructions on the site and it worked as advertised. I've also paired it with my Logitech diNovo Mini although not at the same time.
edit: Actually I installed the cab, turned on the radio, initiated a device search, then I turned on the V70 and pressed the connect button on the bottom. No password was required, I just clicked Next as soon as the mouse was recognized. I think this is a little bit different than the order specified on the website.
i'm encountering two main problems.
1) the Teksoft software is not recognising the bluetooth is on. I'm using the radio rom that comes with dutty's v1.7.
2) after I pair the mouse (with a blank password) it remains in discovery mode.
Just a bit of extra information i'm using the ig keyboard and have the igo software installed not sure if that could be causing problems. Also having read other forums the mouse i was trying to use was the microsoft 5000 and one of the guys had this working perfectly which leads me to believe its my phone.
Any help would be much appreciated.
Bluetooth stack on HTC HD2
Hi All,
I just got th HTC HD2 and I also run into difficulties connecting a bluetooth mouse. Looks like the problem lies in the Bluetooth stack.
I'm using a iGo/Thinkoutside stowaway bluetooth mouse and keyboard. The software (latest version from 2007) does not recognise that Bluetooth is on.
The keyboard is recognised as a standard HID device and works without any additional software.
I tried the Teksoftco Blueinput software and got the same problem that the software does not recognise that Bluetooth is on. Probably it only works with the MS bluetooth stack and not the one on HTC HD2 (TP2, HD, ...?).
I can connect to a bluetooth mouse but the HD2 can't find any services to use.
Anyway, If anybode has a solution please post but my hopes are verly low... :-(
Maybe a wired mouse via USB host on the car cradle will work...
HD2 with rii mini bluetooth keyboard
Hey, I have not tried to pair my bt mouse and keyboard together, however, I paired my rii mini bt keyboard and both the mouse and kb work! It is awesome. Let me know if you have any questions. Hope this helps.
anyone have the android.apk that comes on the cd?
its not on my cd and i cant pair it with my phone...
I've attached apk for Rii Mini for Android.
gonzalo_reyes said:
I've attached apk for Rii Mini for Android.
Click to expand...
Click to collapse
thanks man...
for some reason its not letting me connect to the net to register it.
rii
Did you have any luck registering, I'm running into the same thing?
No drivers on the cd.
The software doesn't work on my Touch HD
I tried the V 1.5RC4 but it always displays: "The BlueInput driver is not responding. You need to reinstall this software."
Is it possibly, that I have a altered bluetooth stack with my ROM (Energy)?
Would appreciate any help to get this to work!
playdo said:
The software doesn't work on my Touch HD
I tried the V 1.5RC4 but it always displays: "The BlueInput driver is not responding. You need to reinstall this software."
Is it possibly, that I have a altered bluetooth stack with my ROM (Energy)?
Would appreciate any help to get this to work!
Click to expand...
Click to collapse
I had exactly the same problem in my Touch HD with Energy ROM and found the solution. Our problem is because the bluetooth HID libraries are missing in the Energy ROM. Thus, first, you need to restore them by using TRV_Bth_HID.cab attached. Restart. Then, you need to pair your mouse and to ensure, that the service "input device" has appeared and marked in the bluetooth manager. Restart with the turned on bluetooth and the mouse connected. Only after these steps, you can install V1.5RC4. Note, that V1.5RC4 overwrites the library \Windows\bthhid.dll, which was in TRV_Bth_HID.cab. As a result, after V1.5RC4 installation, your mouse will be seen as "disconnected" in the bluetooth manager - this is normal. But, if you need to install new device, you will have to repeat all steps above.
Help
Please help if any body found. Rii mini bluetooth keyboard connected with desire hd
Advance thanks
nagagaya said:
Please help if any body found. Rii mini bluetooth keyboard connected with desire hd
Advance thanks
Click to expand...
Click to collapse
you look at http://ipadgeartalk.com/ipad/anker-...5-0-cellphones-computer-laptop-notebook-black
I've been having problems with my UK Vodafone Touch Pro 2's bluetooth, can anyone recommend a decent Bluetooth keyboard that works with it?
I've tried the Apple Wireless Keyboard to no avail and my Freedom Universal, which worked on my Kaiser, can't. I found the iPaq hack that someone posted on this site, but unfortunately the keys are almost randomly changed, making it useless.
Thanks for any help.
Bluetooth Keyboard
DH953 is the Dell part number for BT keyboard which I purchased bundled with BT mouse off Ebay minus the dongle. Only cost around $35.00 USD. Have been using both for over a year on my 2 laptops and desktop pc. Using it with the TP2 for anything allowed such as internet, email, sms, etc... Hope this helps you.
But what about PDA
But what about PDA
do it support PDA asus p750
Using Freedom here. Don't use the disk, the phone just pairs up without any additional drivers.
Thanks for the tips. I managed to get the Apple keyboard working with my old Kaiser using BlueInput, but only after a hard reset to remove the Freedom HID.
Think I'll hold out until BlueInput supports Broadcomm
Hi,
I'm trying to connect the microsoft intellimouse explorer for bluetooth to the xoom.
Unfortunately the xoom BT requires a passkey to be entered to pair the device.
The Microsoft mouse is not using a passkey to pair.
What am I doing wrong?
Any workaround for this?
i have tried to enter 0000 or 1234 but did no pair.
Please HELP
Thanks
MS and Targus mice su**s.
Maybe 0123?
found this thread with some numbers, but they didn't have any luck either. May be one of them will work for you. good luck.
http://forum.xda-developers.com/showthread.php?t=1079805
I too have one of these guys, if we're talking about the same one its the very first BT mouse that MS made, soft touch blue with a silver dongle stand and a matching blue dongle? I read somewhere that it came out before HID profile was finalized so it relied on intellipoint to tell the dongle to initiate the pairing process. Mac guys had problems with pairing until they updated the software to include the mouse so i'm inclined to believe that explaination. If the device doesn't have the ability to pair without using a passkey, theres no way to pair the mouse as it has no passkey in it. I've tried the usual keys on my transformer as well as TP with cm9 and 2 evos all to no avail.
If u can't get that one to work for u, I use the Microsoft Bluetooth notebook mouse 9000. Works great!
Sent from my Xoom using xda premium
i also have Microsoft Bluetooth notebook mouse 9000 and it is working fine.
Hey! Just found a solution!!! https://play.google.com/store/apps/details?id=com.jpn.frontia.waka.Bluetooth
Worked on my Samsung N7000 and BT Genius mouse:
1.Install app and open it
2.Make BT devices search and find your mouse
3.Push single button on the top of application screen
4.Little message apperes below like "ChineseSymbols!"
5.Turn your BT off and on
6. Take a look at you paired BT devices
7. PROFIT!!!
via: http://code.google.com/p/android/issues/detail?id=26041
Click to expand...
Click to collapse
I can confirm it works on my Samsung Galaxy S3. Btw, the app is in Japanese not Chinese. After you clicked on the mouse in the app to pair it you will need to go to the settings of the mouse and use it as a pointer.