Help !
I’m having strange issues with my DHD – Every time I try loading Android Rev. 6.1.5 or LeeDroid v4.0 my phone just hangs at the White HTC Screen…
I tried loading both Roms with Rom Manager and 4EXT – But seems to make no difference…
Even stranger if I load a small rom such as Miui or CM7 they both install ok!
Before you ask if the file is corrupt i did MD5 checks on both Andoird Rev. and LeeDroid after download and they pass!
Looking through my SD card I found the recovery log from trying to install Adriod Rev. Not being used to this Op sys. I was hoping someone could shed some light on these errors for me ?
symlink: failed to symlink /system/xbin/bb/ifconfig to /system/xbin/ifconfig: No such file or directory
symlink: failed to symlink /system/xbin/bb/route to /system/xbin/route: No such file or directory
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
about to run program [/system/xbin/busybox] with 4 args
run_program: execv failed: No such file or directory
run_program: child exited with status 1
about to run program [/sbin/grep] with 3 args
run_program: child exited with status 1
>>> Creating toolbox symlinksset_perm: chown of /system/xbin/su to 0 0 failed: No such file or directory
set_perm: chmod of /system/xbin/su to 6755 failed: No such file or directory
set_perm: chown of /system/xbin/openvpn to 1000 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/openvpn to 755 failed: No such file or directory
Help !
Did you in any way edit the roms?
Also did you do a full wipe
Sent from my Desire HD using xda premium
Hi,
No the Rom was original and i ran the super_wipe as instructed...
Have been looking around to see if it maybe my SD card, But i can extract the Rom zip with no errors....
Cheers
And this error came from recovery
Sent from my HTC Desire HD A9191 using xda premium
No errors are reported during install, But when i reboot it just hangs at the white screen HTC screen...
Have You tried flash another radio? Once i flashed ARHD ROM and when reboot it hanged at the white screen, then i flashed recommended radio and problem was solved
Finally fixed, restored phone back to factory then rooted again...
Installs all roms no probs
Sent from my Desire HD using XDA App
So I was testing out the PIMP MY ROM release which is supposed to give a bunch of customizable tweaks for your phone.
Link to thread
Here is the log with the settings I used.
*****************************************************************************************************
AROMA INSTALLER version 2.51
(c) 2012 by amarullz xda-developers
ROM Name : >>> Pimp My Rom <<<
ROM Version : 2.0
ROM Author : Androguide.fr
Device : Any android device
Start at : Fri Oct 12 14:18:47 2012
=================================
Pimp My Rom by Androguide.fr
Please be patient. I Hope you enjoyed the installer features.
=================================
Unmounting devices
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
umount: can't umount /cache: Device or resource busy
run_program: child exited with status 1
>>> Setting up installation....
>>> Mounting partitions
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
>>> Cleaning process
about to run program [/sbin/sync] with 1 args
Backing-up original build.prop for eventual use of Un-Pimp My Rom...
about to run program [/tmp/backup_buildprop.sh] with 2 args
Original build.prop backed-up
Init.d tweaks...
Installing Touchscreen responsiveness Tweaks....
about to run program [/tmp/touch] with 1 args
chmod: /sys/class/touch/switch/set_touchscreen: No such file or directory
/tmp/touch[3]: can't create /sys/class/touch/switch/set_touchscreen: No such file or directory
/tmp/touch[4]: can't create /sys/class/touch/switch/set_touchscreen: No such file or directory
/tmp/touch[5]: can't create /sys/class/touch/switch/set_touchscreen: No such file or directory
/tmp/touch[6]: can't create /sys/class/touch/switch/set_touchscreen: No such file or directory
/tmp/touch[7]: can't create /sys/class/touch/switch/set_touchscreen: No such file or directory
chmod: /sys/class/touch/switch/set_touchscreen: No such file or directory
run_program: child exited with status 1
Installing Internet Speed Tweaks....
about to run program [/tmp/netspeed] with 1 args
run_program: child exited with status 1
Installing Battery Tweaks....
about to run program [/tmp/battery] with 1 args
Applying Kernel Tweaks....
about to run program [/tmp/kernel] with 1 args
run_program: child exited with status 1
Applying Ondemand Kernel Governor Tweaks....
about to run program [/tmp/ondemand] with 1 args
Tweaking Dalvik Virtual Machine....
about to run program [/tmp/vm] with 1 args
Copying sqlite3 Defragmentation bootscript....
about to run program [/tmp/defrag] with 1 args
run_program: execv failed: No such file or directory
run_program: child exited with status 1
Setting strict minimum free memory handler...
Installing ext4-fs Performance Tweak....
about to run program [/tmp/ext4] with 1 args
tune2fs 1.41.12 (17-May-2010)
tune2fs 1.41.12 (17-May-2010)
tune2fs 1.41.12 (17-May-2010)
Enabling misc ram tweaks....
Installing Multi-Tasking Tweaks....
Extract: /system/etc/init.d/71extreme
Installing SQLite Tweaks....
Extract: /system/etc/init.d/85sqlite
Extract: /system/xbin/sqlite3
Installing Experimental Tweaks....
Extract: /system/etc/sysctl.conf
Installing various smoothness tweaks...
Extract: /system/etc/init.d/05LagFixer
Extract: /system/etc/init.d/71net
about to run program [/tmp/smoothness] with 1 args
/tmp/smoothness[106]: $n: unexpected '$'
/tmp/smoothness[106]: $n: unexpected '$'
/tmp/smoothness[106]: $CHECK_COUNT: unexpected '$'
/tmp/smoothness[106]: $DEBUG_ECHO: unexpected '$'
/tmp/smoothness[106]: $n: unexpected '$'
/tmp/smoothness[106]: $n: unexpected '$'
/tmp/smoothness[106]: $CHECK_COUNT: unexpected '$'
/tmp/smoothness[106]: $DEBUG_ECHO: unexpected '$'
/tmp/smoothness[111]: $DEBUG_ECHO: unexpected '$'
Applying micro sdcard tweaks....
about to run program [/tmp/S83extsd] with 1 args
/tmp/S83extsd[2]: can't create /sys/block/mtdblock0/bdi/read_ahead_kb: No such file or directory
/tmp/S83extsd[3]: can't create /sys/block/mtdblock1/bdi/read_ahead_kb: No such file or directory
/tmp/S83extsd[4]: can't create /sys/block/mtdblock2/bdi/read_ahead_kb: No such file or directory
/tmp/S83extsd[5]: can't create /sys/block/mtdblock3/bdi/read_ahead_kb: No such file or directory
/tmp/S83extsd[22]: can't create $a/queue/nr_requests: No such file or directory
/tmp/S83extsd[22]: can't create $a/queue/nr_requests: No such file or directory
run_program: child exited with status 1
Internal sd I/O tweaks....
Installing zipalign binaries....
Extract: /system/etc/init.d/S70darky_zipalign
Extract: /system/xbin/zipalign
Installing Thunderbolt system_tweak....
Extract: /system/etc/init.d/S98system_tweak
Extract: /system/lib/libncurses.so
Extract: /system/xbin/sqlite3
Extract: /system/xbin/zipalign
Installing Thunderbolt cpu/gpu add-on....
Installing Thunderbolt tcp buffers tweaks....
Extract: /system/etc/init.d/S98TCPbuffers
Installing Thunderbolt sqlite3 optimization....
Extract: /system/etc/init.d/sqlite_optimize
Build.prop Tweaks...
Writing 3G build.prop Tweaks....
about to run program [/tmp/3g.sh] with 1 args
Writing Battery Saving build.prop Tweaks....
about to run program [/tmp/battery_save.sh] with 1 args
Writing Camera quality build.prop Tweaks....
about to run program [/tmp/camera.sh] with 1 args
Writing Wifi connect speed build.prop Tweaks....
about to run program [/tmp/connect_speed.sh] with 1 args
Writing Dalvik ram build.prop Tweaks....
about to run program [/tmp/dalvik_ram.sh] with 1 args
Writing Deep-Sleep build.prop Tweaks....
about to run program [/tmp/deep_sleep.sh] with 1 args
Writing Dialing time build.prop Tweaks....
about to run program [/tmp/dial_out.sh] with 1 args
Writing Jpeg quality build.prop Tweaks....
about to run program [/tmp/jpg_quality.sh] with 1 args
Locking default launcher in memory....
about to run program [/tmp/lock_launcher.sh] with 1 args
Writing internet speed tweaks....
about to run program [/tmp/net_speed.sh] with 1 args
Writing touchscreen build.prop tweaks....
about to run program [/tmp/perf_tuning.sh] with 1 args
Allowing assets to be purged....
about to run program [/tmp/purge_assets.sh] with 1 args
Writing Scrolling speed build.prop tweaks....
about to run program [/tmp/scrolling.sh] with 1 args
Writing Video Streaming build.prop tweaks....
about to run program [/tmp/streaming.sh] with 1 args
Making device boot faster....
about to run program [/tmp/quickpower.sh] with 1 args
Enabling and Disabling Features...
Enabling Just-In-Time Compiler for Dalvik VM....
about to run program [/tmp/dalvik_jit.sh] with 1 args
Disabling Normalized Sleeper....
about to run program [/tmp/normsleep.sh] with 1 args
chmod: /sys/kernel/debug/sched_features: No such file or directory
/tmp/normsleep.sh[4]: can't create /sys/kernel/debug/sched_features: No such file or directory
chmod: /sys/kernel/debug/sched_features: No such file or directory
run_program: child exited with status 1
Multitasking...
about to run program [/tmp/lmk_chmod] with 1 args
ZRAM...
sysctl multitasking tweaks...
Tweaking kernel's stability on high memory-consumption conditions...
about to run program [/tmp/sysctl_kernel.sh] with 1 args
kernel.panic = 0
kernel.panic_on_oops = 1
kernel.msgmni = 2048
kernel.msgmax = 64000
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 268435456
kernel.sem = 500 512000 64 2048
kernel.sched_compat_yield = 1
kernel.sched_child_runs_first = 0
kernel.threads-max = 5000
fs.lease-break-time = 10
fs.file-max = 65536
Tweaking Dalvik VM's handling of high multitasking conditions...
about to run program [/tmp/sysctl_vm.sh] with 1 args
vm.drop_caches = 1
vm.drop_caches = 3
vm.oom_kill_allocating_task = 0
vm.panic_on_oom = 0
vm.dirty_background_ratio = 60
vm.dirty_ratio = 95
sysctl: error: malformed setting 'vm.vfs_cache_pressure='
vm.overcommit_memory = 1
vm.min_free_order_shift = 4
vm.laptop_mode = 0
vm.block_dump = 0
vm.oom_dump_tasks = 1
vm.swappiness = 0
vm.dirty_writeback_centisecs = 2000
vm.dirty_expire_centisecs = 1000
sysctl: error: malformed setting 'vm.min_free_kbytes='
run_program: child exited with status 1
Networks & Internet
Stability : increasing queue and buffer size of TCP sockets...
about to run program [/tmp/sysctl_queue.sh] with 1 args
vm.drop_caches = 1
vm.drop_caches = 3
vm.oom_kill_allocating_task = 0
vm.panic_on_oom = 0
vm.dirty_background_ratio = 60
vm.dirty_ratio = 95
sysctl: error: malformed setting 'vm.vfs_cache_pressure='
vm.overcommit_memory = 1
vm.min_free_order_shift = 4
vm.laptop_mode = 0
vm.block_dump = 0
vm.oom_dump_tasks = 1
vm.swappiness = 0
vm.dirty_writeback_centisecs = 2000
vm.dirty_expire_centisecs = 1000
sysctl: error: malformed setting 'vm.min_free_kbytes='
run_program: child exited with status 1
Stability : Allowing system to re-use sockets in TIME-WAIT state....
about to run program [/tmp/sysctl_timewait.sh] with 1 args
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_tw_reuse = 1
Speed : Using sysctl to tweak ipv4 protocol behaviour....
about to run program [/tmp/sysctl_ipv4.sh] with 1 args
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_sack = 1
net.ipv4.tcp_fack = 1
net.ipv4.tcp_congestion_control = cubic
net.ipv4.tcp_window_scaling = 1
Speed : Applying dns & ppp0 tweaks....
about to run program [/tmp/dnsppp.sh] with 1 args
GPS Configuration...
Updating your gps.conf to match your country....
Deleting old configuration...
Copying new config...
Extract: /system/etc/gps.conf
gps.conf file updated, the gps is now more accurate and locks faster...
Installing Smart Stay EX...
Allowing Writes to Complete, Please Wait....
Extra Features
Installing Adrenaline Boost scripts....
Generating Adblock hosts file....
Extract: /system/etc/hosts
Fixing Permissions...
Pimp My Rom is checking if all the pimpin' went right, please stand by....
about to run program [/tmp/aroma/sleep] with 2 args
run_program: execv failed: Permission denied
run_program: child exited with status 1
Unmounting /data and /system
Finished, enjoy your freshly Pimped rom !
script result was [1]
Installer Sucessfull (Status 0)
End at : Fri Oct 12 14:18:56 2012
*****************************************************************************************************************************
After running the 10.10.12 version of CM10, I put it to sleep and it had the black screen of death and it couldn't boot up and was stuck at the LG logo screen. I just started CWM Recovery and flashed the ROM again which erased the tweaks.
As for right now, I'm only using the Lightning Zap v1 tweak on my 10.10.12 CM10 Nightly and its so smooth and even think it's saving me quite a bit of battery.
TL;DR: If you're going to test out PIMP MY ROM, be warned that some tweaks may cause your phone to be stuck on boot loop.
Also got stuck on LG logo on boot. But one question. How many tweaks did u apply at once? It does say not to apply all at once. Maybe the number of tweaks applied at one time is the issue? I have the lightning zap as well as the v6 supercharger and my phone is the fastest I've ever had it. Running paranoidandroid 2.5x by utacka.
Sent from my LG-P930, ParanoidAndroid, Supercharged, using xda premium
So I have done all the steps to installing Backtrack 5 on my SM-T210 correctly, but when i try to boot it up using "bootbt" i get an error like this:
"[email protected]:/ $
130|[email protected]:/ $ cd /storage/extSdCard/BT5
[email protected]:/storage/extSdCard/BT5 $ su
[email protected]:/storage/extSdCard/BT5 # sh bootbt
Loop device exists
open backing file failed: No such file or directory
mount: No such file or directory
mount: No such file or directory
mount: No such file or directory
net.ipv4.ip_forward = 1
bootbt[23]: can't create /data/local/mnt/etc/resolv.conf: No such file or directory
bootbt[24]: can't create /data/local/mnt/etc/hosts: No such file or directory
chroot: can't execute '/bin/bash': No such file or directory
Shutting down BackTrack ARM For Xoom
failed: No such file or directory
failed: No such file or directory
failed: No such file or directory
failed: Invalid argument
1|[email protected]:/storage/extSdCard/BT5 #"
any suggestions? Im new to android.
http://forum.xda-developers.com/showthread.php?t=1074723
This thread covers installing backtrack on the Xoom tablet. Also implies it can be installed on other devices. Last activity in the thread was in 2012 but there still may be some helpful information.
sent from a buggy xda app by some miracle
Hello,
I am trying to flash a new one onto my new HTC one 2014 Verizon. I grabbed the Viper and Revolution Roms, got S-Off, and TWRP installed however once TWRP seemed like I (or it) cleared the system partition some how without a stock backup (It said 0MB when checking the partitions).
Anyway, continued on my way to flashing...Well, heres some logs... ~.~
Code:
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : ViperOneM8
ROM Version : 1.3.0
ROM Author : Team Venom
Device : HTC One M8
Start at : Wed Apr 23 08:56:03 2014
I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
load_volume_table: Can't get the /proc/emmc table
===========================================
ViperOneM8 1.3.0 By Team Venom
about to run program [/sbin/getprop] with 2 args
m8
about to run program [/sbin/getprop] with 2 args
m8
Be patient - 1st boot may take a while
===========================================
Extracting tools
Installing Venom Tools
Extracting Build Tools
about to run program [/sbin/busybox] with 3 args
Setting permissions
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 3 args
mount: mounting /dev/block/mmcblk0p45 on /system failed: Invalid argument
run_program: child exited with status 255
about to run program [/sbin/busybox] with 7 args
Setting HostsFileExists to 0 in /tmp/VenomSettings.prop
Formatting Partitions
Formatting /system
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Warning: the fs_type small is not defined in mke2fs.conf
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
5632 inodes, 22528 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=25165824
1 block group
32768 blocks per group, 32768 fragments per group
5632 inodes per group
Writing inode tables: 0/1done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 29 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Formatting /cache
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
172032 inodes, 688128 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=704643072
21 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Writing inode tables: 0/21 1/21 2/21 3/21 4/21 5/21 6/21 7/21 8/21 9/2110/2111/2112/2113/2114/2115/2116/2117/2118/2119/2120/21done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Wiping /data except for /data/media
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
system files from SD Card
about to run program [/sbin/sleep] with 2 args
Extracting Files
Writing System
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
Writing Data
Installing Mods
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
Installing Viper Boot
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
about to run program [/sbin/busybox] with 7 args
Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveMediaPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting KeyboardsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 5 args
/sdcard/Venom/Tools/SetSetting.sh: line 2: /system/xbin/sqlite3: not found
run_program: child exited with status 127
about to run program [/sbin/busybox] with 7 args
Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
about to run program [/sbin/busybox] with 7 args
Setting KernelExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/dd] with 3 args
16524+0 records in
16524+0 records out
8460288 bytes (8.1MB) copied, 1.438112 seconds, 5.6MB/s
Kernel Flashed.
Finalizing Install
Creating toolbox symlinks
Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Wed Apr 23 08:56:34 2014
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Pretty much the same error with Android Revolution
Code:
>>> Installing SQLite Tweaks
set_perm: chown of /system/xbin/sqlite3 to 0 0 failed: No such file or directory
set_perm: chmod of /system/xbin/sqlite3 to 4755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
I have tired this multiple times, resetting to defaults or not. Deselection of features, ect...
Seems to be an issue with my system, not the rom... anyone have any ideas?
Thanks.
I'm pretty sure I read this problem yesterday. Have you searched?
Make sure you have the correct recovery for your device.
BenPope said:
I'm pretty sure I read this problem yesterday. Have you searched?
Make sure you have the correct recovery for your device.
Click to expand...
Click to collapse
I did search prior to posting, most of the 'solutions' was just to try try again from the beginning. Didn't have that option as at the time I did not have a backup.
But I was able to find one made form unofficial cwm before I switched to TWRP, and started all over.
Looks like it may be fine now.
Thanks!
Fizzy99 said:
I did search prior to posting, most of the 'solutions' was just to try try again from the beginning. Didn't have that option as at the time I did not have a backup.
But I was able to find one made form unofficial cwm before I switched to TWRP, and started all over.
Looks like it may be fine now.
Thanks!
Click to expand...
Click to collapse
I had this problem too when I was using M8 TWRP. Verizon variant is named M8_WLV. Using the M8_WLV TWRP I had no issues. XDA thread here: http://forum.xda-developers.com/showthread.php?t=2717928 Hope that helps.
Similar issue on HTC One m8 GPE, no fix yet
I have similar issue when flashing ROM on my HTC One m8 GPE from play store.
I have unlocked bootloader & s-off and installed TWRP 2.7.0.2
I tried to install ViperOne and Revolution HD (choosing HTC One m8 International variant) many times, and every time the end of the ROM flashing process is symlink: some symlinks failed.
And when I reboot, I got a bootloop into recovery.
I also tried using different custom recovery like CWM and even verizon version of TWRP, but nothing worked.
I've searched back and forth, and don't see to find solutions here.
gary7135 said:
I have similar issue when flashing ROM on my HTC One m8 GPE from play store.
I have unlocked bootloader & s-off and installed TWRP 2.7.0.2
I tried to install ViperOne and Revolution HD (choosing HTC One m8 International variant) many times, and every time the end of the ROM flashing process is symlink: some symlinks failed.
And when I reboot, I got a bootloop into recovery.
I also tried using different custom recovery like CWM and even verizon version of TWRP, but nothing worked.
I've searched back and forth, and don't see to find solutions here.
Click to expand...
Click to collapse
I am experiencing this same issue on my VZW M8. I am S off also getting failed revolution hd installs. Any fixes?
Fizzy99 said:
Hello,
I am trying to flash a new one onto my new HTC one 2014 Verizon. I grabbed the Viper and Revolution Roms, got S-Off, and TWRP installed however once TWRP seemed like I (or it) cleared the system partition some how without a stock backup (It said 0MB when checking the partitions).
Anyway, continued on my way to flashing...Well, heres some logs... ~.~
Code:
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : ViperOneM8
ROM Version : 1.3.0
ROM Author : Team Venom
Device : HTC One M8
Start at : Wed Apr 23 08:56:03 2014
I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
load_volume_table: Can't get the /proc/emmc table
===========================================
ViperOneM8 1.3.0 By Team Venom
about to run program [/sbin/getprop] with 2 args
m8
about to run program [/sbin/getprop] with 2 args
m8
Be patient - 1st boot may take a while
===========================================
Extracting tools
Installing Venom Tools
Extracting Build Tools
about to run program [/sbin/busybox] with 3 args
Setting permissions
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 3 args
mount: mounting /dev/block/mmcblk0p45 on /system failed: Invalid argument
run_program: child exited with status 255
about to run program [/sbin/busybox] with 7 args
Setting HostsFileExists to 0 in /tmp/VenomSettings.prop
Formatting Partitions
Formatting /system
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Warning: the fs_type small is not defined in mke2fs.conf
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
5632 inodes, 22528 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=25165824
1 block group
32768 blocks per group, 32768 fragments per group
5632 inodes per group
Writing inode tables: 0/1done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 29 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Formatting /cache
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
172032 inodes, 688128 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=704643072
21 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Writing inode tables: 0/21 1/21 2/21 3/21 4/21 5/21 6/21 7/21 8/21 9/2110/2111/2112/2113/2114/2115/2116/2117/2118/2119/2120/21done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Wiping /data except for /data/media
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
system files from SD Card
about to run program [/sbin/sleep] with 2 args
Extracting Files
Writing System
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
Writing Data
Installing Mods
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
Installing Viper Boot
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
about to run program [/sbin/busybox] with 7 args
Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveMediaPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting KeyboardsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 5 args
/sdcard/Venom/Tools/SetSetting.sh: line 2: /system/xbin/sqlite3: not found
run_program: child exited with status 127
about to run program [/sbin/busybox] with 7 args
Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
about to run program [/sbin/busybox] with 7 args
Setting KernelExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/dd] with 3 args
16524+0 records in
16524+0 records out
8460288 bytes (8.1MB) copied, 1.438112 seconds, 5.6MB/s
Kernel Flashed.
Finalizing Install
Creating toolbox symlinks
Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Wed Apr 23 08:56:34 2014
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Pretty much the same error with Android Revolution
Code:
>>> Installing SQLite Tweaks
set_perm: chown of /system/xbin/sqlite3 to 0 0 failed: No such file or directory
set_perm: chmod of /system/xbin/sqlite3 to 4755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
I have tired this multiple times, resetting to defaults or not. Deselection of features, ect...
Seems to be an issue with my system, not the rom... anyone have any ideas?
Thanks.
Click to expand...
Click to collapse
Your log file looked similar to mine and I tried everything to get these ROM's to install. I had been trying to install the ROM from the SD card and I had nothing else to try so figured I would copy to the internal SD and give it a shot and that fixed the issues and the ROM installed no problem. Hope this solves your install issue too. Thanks
I am having the same issue on my HTC one m8 verizon version. Trying to flash Android Revolution HD... I've tried having it on internal memory and external and I've made sure I have the right TWRP installed. Every time the install finishes it says set_perm: some changes failed and twrp crashes. Any other ideas?
In case it's helpful for someone, here's a log file. I also read in another thread that someone had success if they wiped /system before trying to install. I'll see if that helps soon.
Code:
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : Android Revolution HD
ROM Version : 10.2
ROM Author : mike1986
Device : HTC One (M8)
Start at : Mon Aug 4 12:27:28 2014
I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
load_volume_table: Can't get the /proc/emmc table
=================================
Android Revolution HD by mike1986
=================================
>>> Formatting partitions
about to run program [/sbin/umount] with 2 args
umount: can't umount /system: Invalid argument
run_program: child exited with status 1
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Warning: the fs_type small is not defined in mke2fs.conf
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
5632 inodes, 22528 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=25165824
1 block group
32768 blocks per group, 32768 fragments per group
5632 inodes per group
Writing inode tables: 0/1done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 23 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p47 on /cache failed: Device or resource busy
run_program: child exited with status 255
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p48 on /data failed: Device or resource busy
run_program: child exited with status 255
about to run program [/tmp/wipe.sh] with 1 args
>>> Mounting partitions
about to run program [/sbin/mount] with 2 args
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p48 on /data failed: Device or resource busy
run_program: child exited with status 255
>>> Cleaning process
about to run program [/tmp/clean.sh] with 1 args
>>> Writing Data & System
about to run program [/sbin/busybox] with 5 args
about to run program [/sbin/sync] with 1 args
>>> Copying U.S. Verizon related files
>>> Installing Google Chrome
>>> Installing Google Maps & Google Street
>>> Installing Google Music
>>> Installing Google Plus
>>> Installing Google Now
>>> Installing Google Keep
>>> Installing Google Hangouts
>>> Installing Google YouTube
>>> Installing Google Drive
>>> Installing ES File Explorer
>>> Installing Facebook
>>> Installing Adobe Flash Player
>>> Installing Adobe Reader
>>> Installing Twitter
about to run program [/sbin/busybox] with 3 args
mkdir: can't create directory '/system/bin/.ext': No space left on device
run_program: child exited with status 1
about to run program [/sbin/busybox] with 4 args
cp: can't stat '/system/xbin/su': No such file or directory
run_program: child exited with status 1
>>> Installing Sense 6 Toolbox & Xposed
>>> Creating toolbox symlinks
>>> Creating additional symlinks
>>> Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Mon Aug 4 12:28:54 2014
EDIT:
Wiping /system before flashing the rom was a success! No hitches at all, and had it up and running. However, since it's a verizon device, apparently the firmware isn't out yet. Because of this I had no wifi and really long boot times. I'm gonna flash back to stock until the firmware is released with the next verizon software update. Happy flashing everyone!
The solution that worked for me
I was struggling with this issue while trying to install several ROMs. The reason I was getting this is because I was starting with a GPE phone and was trying to install ROMs that we based on HTC's Sense build (Viper, ARHD, etc...)
The reason is that the partition sizes are different between GPE and stock HTC. I believe that you will encounter the same issue if you installed the GPE RUU on your phone and are trying to revert.
I followed the instructions found here: http://forum.xda-developers.com/showthread.php?t=2733523 which required me to flash the firmware from what I had back to an HTC version (after this step I got the HTC logo upon restart instead of the google logo) Flashing this firmware must set the partition sizes to the appropriate values because after this I was able to install the Viper ROM without issue.
mcarnevale said:
I was struggling with this issue while trying to install several ROMs. The reason I was getting this is because I was starting with a GPE phone and was trying to install ROMs that we based on HTC's Sense build (Viper, ARHD, etc...)
The reason is that the partition sizes are different between GPE and stock HTC. I believe that you will encounter the same issue if you installed the GPE RUU on your phone and are trying to revert.
I followed the instructions found here: http://forum.xda-developers.com/showthread.php?t=2733523 which required me to flash the firmware from what I had back to an HTC version (after this step I got the HTC logo upon restart instead of the google logo) Flashing this firmware must set the partition sizes to the appropriate values because after this I was able to install the Viper ROM without issue.
Click to expand...
Click to collapse
Hey guys
I had this same issue and here is what i did.
Boot into CWM
wipe as usual
->Mounts and Storage->format system ->format Data ->Format Cache
->install zip ->your rom
voila!
Worked for me. Thank me if it helps
I had viper Installed but phone had troubles and I factory reset, back to 4.4.3 stock and trying to install viper. Says it installs fine but won't get past boot screen. I have noticed that it installs far too quickly compared to last time and I don't get all the options I had last AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : ViperOneM8
ROM Version : ViperOneM8 2.5.0
ROM Author : Team Venom
Device : HTC One
Start at : Sun Nov 9 11:13:38 2014
===========================================
ViperOneM8 2.5.0 By Team Venom
===========================================
Installing Venom Tools
Extract: /sdcard/Venom/Tools/BuildPropUpdate.sh
Extract: /sdcard/Venom/Tools/CopyLogFile.sh
Extract: /sdcard/Venom/Tools/EnableOTA.sh
Extract: /sdcard/Venom/Tools/ExtraTweaks
Extract: /sdcard/Venom/Tools/FileSystemCheck.sh
Extract: /sdcard/Venom/Tools/SetPropSetting.sh
Extract: /sdcard/Venom/Tools/SetSetting.sh
Extract: /sdcard/Venom/Tools/VenomCheck.sh
Extract: /sdcard/Venom/Tools/VenomMod.sh
Extract: /sdcard/Venom/Tools/VenomTweaksBackup.sh
Extract: /sdcard/Venom/Tools/VenomUpdate.sh
Extract: /sdcard/Venom/Tools/enable_music_channel.sh
Extract: /sdcard/Venom/Tools/fsck.ext4
Extract: /sdcard/Venom/Tools/hide_runtime.sh
Extract: /sdcard/Venom/Tools/sqlite3
Extract: /sdcard/Venom/Tools/zip
Extract: /sdcard/Venom/Tools/zipalign
Setting Permissions
Checking Partitions for Errors
system
about to run program [/sbin/busybox] with 4 args
Found system Partition:
e2fsck 1.41.12 (17-May-2010)
/sdcard/Venom/Tools/fsck.ext4: Is a directory while trying to open /dev/block/
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
run_program: child exited with status 8
cache
about to run program [/sbin/busybox] with 4 args
Found cache Partition:
e2fsck 1.41.12 (17-May-2010)
/sdcard/Venom/Tools/fsck.ext4: Is a directory while trying to open /dev/block/
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
run_program: child exited with status 8
Mounting Partitions
Mounting /system
about to run program [/sbin/busybox] with 3 args
Mounting /data
about to run program [/sbin/busybox] with 3 args
mount: mounting /dev/block/mmcblk0p47 on /data failed: Device or resource busy
run_program: child exited with status 255
Extracting Files
Writing System
Extract: /system/app/VenomBattery.apk
Extract: /system/etc/obb/com.htc.videohighlights.obb
Extract: /system/framework/VenomFramework.jar
Extract: /system/framework/framework-res.apk
Extract: /system/framework/framework.jar
Extract: /system/framework/framework2.jar
Extract: /system/framework/framework3.jar
Extract: /system/framework/services.jar
Extract: /system/priv-app/AndroidHtcSync.apk
Extract: /system/priv-app/DownloadProvider.apk
Extract: /system/priv-app/HtcCalendarWidgets.apk
Extract: /system/priv-app/HtcLockScreen.apk
Extract: /system/priv-app/HtcNotificationWidget.apk
Extract: /system/priv-app/Keyguard.apk
Extract: /system/priv-app/Mail.apk
Extract: /system/priv-app/Phone.apk
Extract: /system/priv-app/SystemUI.apk
Extract: /system/priv-app/VenomHUB.apk
Extract: /system/priv-app/VenomTweaks.apk
Extract: /system/xbin/bb/placeholder
Extract: /system/xbin/openvpn
Writing Data
Extract: /data/app/com.adobe.flashplayer-1.apk
Extract: /data/app/com.google.android.gms-1.apk
Extract: /data/app/com.htc.album-1.apk
about to run program [/sbin/busybox] with 7 args
Setting HasSense to 1 in /tmp/VenomSettings.prop
Extracting Sense Apps
Extract: /system/priv-app/Prism.apk
about to run program [/sbin/busybox] with 7 args
Setting VenomMods to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 4 args
Installing Kernel And Modules
package_extract_file: no additions/carriers/GSM/boot.img in package
about to run program [/sbin/dd] with 3 args
dd: can't open '/tmp/boot.img': No such file or directory
run_program: child exited with status 1
Kernel Flashed.
Creating additional symlinks
Setting Permissions
Setting permissions
Unmounting partitions
===========================================
Update flashed successfully!
===========================================
script succeeded: result was [@===========================================]
Installer Sucessfull (Status 0)
End at : Sun Nov 9 11:13:46 2014
Help?
Try downloading the zip file again using only your phone .sometimes what's downloaded is not a complete file.
AT&T HTC ONE M8
Tried fresh download and still the same. The aroma installer only gives me the bit where I choose if I'm on t mobile, then it's finished. Installing only takes a few seconds compared to a good few minutes when I did it first time.
Mostive made it through is when i didn't do a wipe and it booted, but just came up with error after error and was unusable
I'm thinking a save file is conflicting somewhere bit I don't know where the installation files are
Witch HTC ONE M8 do have?
Are you S-off?
How about supercid?
AT&T HTC ONE M8
Orang001 running 4.4.3
Not s-off so can't change cid. Don't trust myself to go s_off and break something.
4.4.4 update has just been downloaded this morn, will have to flash stock recovery later and try my luck with viper 3
Post your success as an update
AT&T HTC ONE M8
Update done and viper installed perfectly, don't know what was problem last time but could tell straight away this time as aroma installer worked perfectly
Good for you sir
AT&T HTC ONE M8