Develop Bugs

Help stuck in a boot loop after installing Viper One

Hi guys, I have been having issues installing viper and I have no idea what is going on. It does not want to work with anything but the stock roms. Phone is s-off, rooted and I have TWRP installed. I have tried TWRP 2.6 and 2.7 with same results. I have also tried 3.11.605.1 firmware.zip &
3.11.605.1 NO Boot.img firmware.zip with same results. I have also made sure to clear the cache. Logs are attached, can anyone point me in the right direction please
C:\today>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 1.13.41.0109_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.605.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA37GS904869
(bootloader) imei: 990004280148895
(bootloader) meid: 99000428014889
(bootloader) product: m7_wlv
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0731000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3989mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.068s

Did you do a factory reset and you flash the right ROM!
Sent from my HTC One VZW using Tapatalk 4

coldconfession13 said:
Did you do a factory reset and you flash the right ROM!
Sent from my HTC One VZW using Tapatalk 4
Click to expand...
Click to collapse
Should I do a factory reset after installing Viper ? yes I am sure it is the right rom. Here is parts of the install log, it is too long to post on here.
AROMA INSTALLER version 2.70B6
(c) 2013 by amarullz xda-developers
ROM Name : ViperOne
ROM Version : 5.7.0
ROM Author : Team Venom
Device : HTC One
Start at : Fri Mar 14 19:27:42 2014
===========================================
ViperOne 5.7.0 By Team Venom
Be patient - 1st boot may take a while
===========================================
Extracting tools
Installing Venom Tools
Extract: /sdcard/Venom/Tools/BuildPropUpdate.sh
Extract: /sdcard/Venom/Tools/ConfigureSettings.sh
Extract: /sdcard/Venom/Tools/CopyLogFile.sh
Extract: /sdcard/Venom/Tools/DeleteDataWithoutMedia.sh
Extract: /sdcard/Venom/Tools/DeleteSystemApp.sh
Extract: /sdcard/Venom/Tools/DeleteUserApp.sh
Extract: /sdcard/Venom/Tools/EnableOTA.sh
Extract: /sdcard/Venom/Tools/ExtraTweaks
Extract: /sdcard/Venom/Tools/FileSystemCheck.sh
Extract: /sdcard/Venom/Tools/SetPropSetting.sh
Extract: /sdcard/Venom/Tools/SetSetting.sh
Extract: /sdcard/Venom/Tools/UpdateDefaultXml.sh
Extract: /sdcard/Venom/Tools/VenomCheck.sh
Extract: /sdcard/Venom/Tools/VenomMod.sh
Extract: /sdcard/Venom/Tools/VenomThemeTweaksBackup.sh
Extract: /sdcard/Venom/Tools/VenomTweaksBackup.sh
Extract: /sdcard/Venom/Tools/VenomUpdate.sh
Extract: /sdcard/Venom/Tools/fsck.ext4
Extract: /sdcard/Venom/Tools/sqlite3
Extract: /sdcard/Venom/Tools/zip
Extract: /sdcard/Venom/Tools/zipalign
Extracting Build Tools
about to run program [/sbin/busybox] with 3 args
Extract: /temp/fsck.ext4
Extract: /temp/mkfs.ext4
Extract: /temp/tune2fs.ext4
Setting permissions
about to run program [/sbin/busybox] with 7 a
and the end part
/system/xbin/openvpn
Extract: /system/xbin/rlog.sh
Extract: /system/xbin/sqlite3
Extract: /system/xbin/su
Extract: /system/xbin/sysro
Extract: /system/xbin/sysrw
Extract: /system/xbin/tcpdump
Extract: /system/xbin/unrar
Extract: /system/xbin/venom_functions.sh
Extract: /system/xbin/vim
Extract: /system/xbin/zip
Writing Data
Extract: /data/app/com.adobe.flashplayer-1.apk
Extract: /data/app/com.adobe.reader-1.apk
Extract: /data/app/com.android.chrome-1.apk
Extract: /data/app/com.dropbox.android-1.apk
Extract: /data/app/com.estrongs.android.pop-1.apk
Extract: /data/app/com.facebook.katana-1.apk
Extract: /data/app/com.google.android.apps.maps-1.apk
Extract: /data/app/com.google.android.apps.plus-1.apk
Extract: /data/app/com.google.android.gms-1.apk
Extract: /data/app/com.google.android.marvin.talkback-1.apk
Extract: /data/app/com.google.android.street-1.apk
Extract: /data/app/com.google.android.talk-1.apk
Extract: /data/app/com.google.android.youtube-1.apk
Extract: /data/app/com.htc.backup-1.apk
Extract: /data/app/com.infraware.docmaster-1.apk
Extract: /data/app/com.keramidas.TitaniumBackup-1.apk
Extract: /data/app/com.melodis.midomiMusicIdentifier.freemium-1.apk
Extract: /data/app/com.twitter.android-1.apk
Extract: /data/app/com.zoodles.kidmode-1.apk
Extract: /data/app/mobi.mgeek.TunnyBrowser-1.apk
Extract: /data/app/org.adaway-1.apk
Extract: /data/app/tunein.player-1.apk
Installing Mods
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
Generic
about to run program [/sbin/busybox] with 7 args
Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
Extract: /data/system/carrier_icon.png
about to run program [/sbin/busybox] with 7 args
Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 1 in /tmp/VenomSettings.prop
Removing User Apps
AdAway
about to run program [/sbin/busybox] with 4 args
Deleting /data/app/org.adaway-1.apk
Removing Google Apps
Removing Venom Apps
Removing System Apps
about to run program [/sbin/busybox] with 7 args
Setting RemoveMediaPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting KeyboardsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
about to run program [/sbin/busybox] with 7 args
Setting KernelExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/dd] with 3 args
13156+0 records in
13156+0 records out
6735872 bytes (6.4MB) copied, 1.532306 seconds, 4.2MB/s
Kernel Flashed.
Finalizing Install
Creating toolbox symlinks
Installing busybox
about to run program [/system/xbin/busybox] with 4 args
Creating additional symlinks
Setting permissions
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 1 in /tmp/VenomSettings.prop
Cleaning Up
Clearing Existing APNs
Wiping dalvik-cache
Wiping Venom Cache
Unmounting partitions
===========================================
New ROM flashed successfully!
===========================================
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 4 args
script succeeded: result was [0]
Installer Sucessfull (Status 0)
End at : Fri Mar 14 19:29:38 2014

No matter what ROM you are if you are switching do a factory reset
Sent from my HTC One VZW using Tapatalk 4

so the only rom I have been able to successfully boot from is the stock rom

So do a factory reset then flash venom ROM
Sent from my HTC One VZW using Tapatalk 4

factory reset>flash rom>factory reset

Don't have to do a reset after flashing ROM as long as you did it before
Sent from my HTC One VZW using Tapatalk 4

Ok going to try a reset, thanks guys

make sure to read all instructions

HTC One M8 Flashing Rom - set_perm: some changes failed

Hello,
I am trying to flash a new one onto my new HTC one 2014 Verizon. I grabbed the Viper and Revolution Roms, got S-Off, and TWRP installed however once TWRP seemed like I (or it) cleared the system partition some how without a stock backup (It said 0MB when checking the partitions).
Anyway, continued on my way to flashing...Well, heres some logs... ~.~
Code:
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : ViperOneM8
ROM Version : 1.3.0
ROM Author : Team Venom
Device : HTC One M8
Start at : Wed Apr 23 08:56:03 2014
I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
load_volume_table: Can't get the /proc/emmc table
===========================================
ViperOneM8 1.3.0 By Team Venom
about to run program [/sbin/getprop] with 2 args
m8
about to run program [/sbin/getprop] with 2 args
m8
Be patient - 1st boot may take a while
===========================================
Extracting tools
Installing Venom Tools
Extracting Build Tools
about to run program [/sbin/busybox] with 3 args
Setting permissions
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 3 args
mount: mounting /dev/block/mmcblk0p45 on /system failed: Invalid argument
run_program: child exited with status 255
about to run program [/sbin/busybox] with 7 args
Setting HostsFileExists to 0 in /tmp/VenomSettings.prop
Formatting Partitions
Formatting /system
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Warning: the fs_type small is not defined in mke2fs.conf
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
5632 inodes, 22528 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=25165824
1 block group
32768 blocks per group, 32768 fragments per group
5632 inodes per group
Writing inode tables: 0/1done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 29 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Formatting /cache
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
172032 inodes, 688128 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=704643072
21 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Writing inode tables: 0/21 1/21 2/21 3/21 4/21 5/21 6/21 7/21 8/21 9/2110/2111/2112/2113/2114/2115/2116/2117/2118/2119/2120/21done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Wiping /data except for /data/media
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
system files from SD Card
about to run program [/sbin/sleep] with 2 args
Extracting Files
Writing System
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
Writing Data
Installing Mods
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
Installing Viper Boot
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
about to run program [/sbin/busybox] with 7 args
Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveMediaPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting KeyboardsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 5 args
/sdcard/Venom/Tools/SetSetting.sh: line 2: /system/xbin/sqlite3: not found
run_program: child exited with status 127
about to run program [/sbin/busybox] with 7 args
Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
about to run program [/sbin/busybox] with 7 args
Setting KernelExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/dd] with 3 args
16524+0 records in
16524+0 records out
8460288 bytes (8.1MB) copied, 1.438112 seconds, 5.6MB/s
Kernel Flashed.
Finalizing Install
Creating toolbox symlinks
Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Wed Apr 23 08:56:34 2014
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Pretty much the same error with Android Revolution
Code:
>>> Installing SQLite Tweaks
set_perm: chown of /system/xbin/sqlite3 to 0 0 failed: No such file or directory
set_perm: chmod of /system/xbin/sqlite3 to 4755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
I have tired this multiple times, resetting to defaults or not. Deselection of features, ect...
Seems to be an issue with my system, not the rom... anyone have any ideas?
Thanks.

I'm pretty sure I read this problem yesterday. Have you searched?
Make sure you have the correct recovery for your device.

BenPope said:
I'm pretty sure I read this problem yesterday. Have you searched?
Make sure you have the correct recovery for your device.
Click to expand...
Click to collapse
I did search prior to posting, most of the 'solutions' was just to try try again from the beginning. Didn't have that option as at the time I did not have a backup.
But I was able to find one made form unofficial cwm before I switched to TWRP, and started all over.
Looks like it may be fine now.
Thanks!

Fizzy99 said:
I did search prior to posting, most of the 'solutions' was just to try try again from the beginning. Didn't have that option as at the time I did not have a backup.
But I was able to find one made form unofficial cwm before I switched to TWRP, and started all over.
Looks like it may be fine now.
Thanks!
Click to expand...
Click to collapse
I had this problem too when I was using M8 TWRP. Verizon variant is named M8_WLV. Using the M8_WLV TWRP I had no issues. XDA thread here: http://forum.xda-developers.com/showthread.php?t=2717928 Hope that helps.

Similar issue on HTC One m8 GPE, no fix yet
I have similar issue when flashing ROM on my HTC One m8 GPE from play store.
I have unlocked bootloader & s-off and installed TWRP 2.7.0.2
I tried to install ViperOne and Revolution HD (choosing HTC One m8 International variant) many times, and every time the end of the ROM flashing process is symlink: some symlinks failed.
And when I reboot, I got a bootloop into recovery.
I also tried using different custom recovery like CWM and even verizon version of TWRP, but nothing worked.
I've searched back and forth, and don't see to find solutions here.

gary7135 said:
I have similar issue when flashing ROM on my HTC One m8 GPE from play store.
I have unlocked bootloader & s-off and installed TWRP 2.7.0.2
I tried to install ViperOne and Revolution HD (choosing HTC One m8 International variant) many times, and every time the end of the ROM flashing process is symlink: some symlinks failed.
And when I reboot, I got a bootloop into recovery.
I also tried using different custom recovery like CWM and even verizon version of TWRP, but nothing worked.
I've searched back and forth, and don't see to find solutions here.
Click to expand...
Click to collapse
I am experiencing this same issue on my VZW M8. I am S off also getting failed revolution hd installs. Any fixes?

Fizzy99 said:
Hello,
I am trying to flash a new one onto my new HTC one 2014 Verizon. I grabbed the Viper and Revolution Roms, got S-Off, and TWRP installed however once TWRP seemed like I (or it) cleared the system partition some how without a stock backup (It said 0MB when checking the partitions).
Anyway, continued on my way to flashing...Well, heres some logs... ~.~
Code:
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : ViperOneM8
ROM Version : 1.3.0
ROM Author : Team Venom
Device : HTC One M8
Start at : Wed Apr 23 08:56:03 2014
I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
load_volume_table: Can't get the /proc/emmc table
===========================================
ViperOneM8 1.3.0 By Team Venom
about to run program [/sbin/getprop] with 2 args
m8
about to run program [/sbin/getprop] with 2 args
m8
Be patient - 1st boot may take a while
===========================================
Extracting tools
Installing Venom Tools
Extracting Build Tools
about to run program [/sbin/busybox] with 3 args
Setting permissions
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 3 args
mount: mounting /dev/block/mmcblk0p45 on /system failed: Invalid argument
run_program: child exited with status 255
about to run program [/sbin/busybox] with 7 args
Setting HostsFileExists to 0 in /tmp/VenomSettings.prop
Formatting Partitions
Formatting /system
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Warning: the fs_type small is not defined in mke2fs.conf
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
5632 inodes, 22528 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=25165824
1 block group
32768 blocks per group, 32768 fragments per group
5632 inodes per group
Writing inode tables: 0/1done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 29 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Formatting /cache
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
172032 inodes, 688128 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=704643072
21 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Writing inode tables: 0/21 1/21 2/21 3/21 4/21 5/21 6/21 7/21 8/21 9/2110/2111/2112/2113/2114/2115/2116/2117/2118/2119/2120/21done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Wiping /data except for /data/media
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
system files from SD Card
about to run program [/sbin/sleep] with 2 args
Extracting Files
Writing System
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
Writing Data
Installing Mods
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
Installing Viper Boot
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
about to run program [/sbin/busybox] with 7 args
Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveMediaPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting KeyboardsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 5 args
/sdcard/Venom/Tools/SetSetting.sh: line 2: /system/xbin/sqlite3: not found
run_program: child exited with status 127
about to run program [/sbin/busybox] with 7 args
Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
about to run program [/sbin/busybox] with 7 args
Setting KernelExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/dd] with 3 args
16524+0 records in
16524+0 records out
8460288 bytes (8.1MB) copied, 1.438112 seconds, 5.6MB/s
Kernel Flashed.
Finalizing Install
Creating toolbox symlinks
Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Wed Apr 23 08:56:34 2014
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Pretty much the same error with Android Revolution
Code:
>>> Installing SQLite Tweaks
set_perm: chown of /system/xbin/sqlite3 to 0 0 failed: No such file or directory
set_perm: chmod of /system/xbin/sqlite3 to 4755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
I have tired this multiple times, resetting to defaults or not. Deselection of features, ect...
Seems to be an issue with my system, not the rom... anyone have any ideas?
Thanks.
Click to expand...
Click to collapse
Your log file looked similar to mine and I tried everything to get these ROM's to install. I had been trying to install the ROM from the SD card and I had nothing else to try so figured I would copy to the internal SD and give it a shot and that fixed the issues and the ROM installed no problem. Hope this solves your install issue too. Thanks

I am having the same issue on my HTC one m8 verizon version. Trying to flash Android Revolution HD... I've tried having it on internal memory and external and I've made sure I have the right TWRP installed. Every time the install finishes it says set_perm: some changes failed and twrp crashes. Any other ideas?

In case it's helpful for someone, here's a log file. I also read in another thread that someone had success if they wiped /system before trying to install. I'll see if that helps soon.
Code:
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : Android Revolution HD
ROM Version : 10.2
ROM Author : mike1986
Device : HTC One (M8)
Start at : Mon Aug 4 12:27:28 2014
I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
load_volume_table: Can't get the /proc/emmc table
=================================
Android Revolution HD by mike1986
=================================
>>> Formatting partitions
about to run program [/sbin/umount] with 2 args
umount: can't umount /system: Invalid argument
run_program: child exited with status 1
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Warning: the fs_type small is not defined in mke2fs.conf
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
5632 inodes, 22528 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=25165824
1 block group
32768 blocks per group, 32768 fragments per group
5632 inodes per group
Writing inode tables: 0/1done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 23 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p47 on /cache failed: Device or resource busy
run_program: child exited with status 255
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p48 on /data failed: Device or resource busy
run_program: child exited with status 255
about to run program [/tmp/wipe.sh] with 1 args
>>> Mounting partitions
about to run program [/sbin/mount] with 2 args
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p48 on /data failed: Device or resource busy
run_program: child exited with status 255
>>> Cleaning process
about to run program [/tmp/clean.sh] with 1 args
>>> Writing Data & System
about to run program [/sbin/busybox] with 5 args
about to run program [/sbin/sync] with 1 args
>>> Copying U.S. Verizon related files
>>> Installing Google Chrome
>>> Installing Google Maps & Google Street
>>> Installing Google Music
>>> Installing Google Plus
>>> Installing Google Now
>>> Installing Google Keep
>>> Installing Google Hangouts
>>> Installing Google YouTube
>>> Installing Google Drive
>>> Installing ES File Explorer
>>> Installing Facebook
>>> Installing Adobe Flash Player
>>> Installing Adobe Reader
>>> Installing Twitter
about to run program [/sbin/busybox] with 3 args
mkdir: can't create directory '/system/bin/.ext': No space left on device
run_program: child exited with status 1
about to run program [/sbin/busybox] with 4 args
cp: can't stat '/system/xbin/su': No such file or directory
run_program: child exited with status 1
>>> Installing Sense 6 Toolbox & Xposed
>>> Creating toolbox symlinks
>>> Creating additional symlinks
>>> Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Mon Aug 4 12:28:54 2014
EDIT:
Wiping /system before flashing the rom was a success! No hitches at all, and had it up and running. However, since it's a verizon device, apparently the firmware isn't out yet. Because of this I had no wifi and really long boot times. I'm gonna flash back to stock until the firmware is released with the next verizon software update. Happy flashing everyone!

The solution that worked for me
I was struggling with this issue while trying to install several ROMs. The reason I was getting this is because I was starting with a GPE phone and was trying to install ROMs that we based on HTC's Sense build (Viper, ARHD, etc...)
The reason is that the partition sizes are different between GPE and stock HTC. I believe that you will encounter the same issue if you installed the GPE RUU on your phone and are trying to revert.
I followed the instructions found here: http://forum.xda-developers.com/showthread.php?t=2733523 which required me to flash the firmware from what I had back to an HTC version (after this step I got the HTC logo upon restart instead of the google logo) Flashing this firmware must set the partition sizes to the appropriate values because after this I was able to install the Viper ROM without issue.

mcarnevale said:
I was struggling with this issue while trying to install several ROMs. The reason I was getting this is because I was starting with a GPE phone and was trying to install ROMs that we based on HTC's Sense build (Viper, ARHD, etc...)
The reason is that the partition sizes are different between GPE and stock HTC. I believe that you will encounter the same issue if you installed the GPE RUU on your phone and are trying to revert.
I followed the instructions found here: http://forum.xda-developers.com/showthread.php?t=2733523 which required me to flash the firmware from what I had back to an HTC version (after this step I got the HTC logo upon restart instead of the google logo) Flashing this firmware must set the partition sizes to the appropriate values because after this I was able to install the Viper ROM without issue.
Click to expand...
Click to collapse
Hey guys
I had this same issue and here is what i did.
Boot into CWM
wipe as usual
->Mounts and Storage->format system ->format Data ->Format Cache
->install zip ->your rom
voila!
Worked for me. Thank me if it helps

[Q] Help to install RomAur v3.0 on UB

Hi... I have try to install RomAur v3.0 many times, but no success... stuck on sony logo bootloop. Aroma installer show Set_perm:failed at the end.
Here is the log.
Code:
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : RomAur
ROM Version : v3.0
ROM Author : auras76
Device : Xperia Z1c - d5503
Start at : Sat Apr 26 11:25:46 2014
=================================
RomAur by auras76
=================================
>>> Formatting partitions
Creating filesystem with parameters:
Size: 209715200
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 51200
Block groups: 2
Reserved block group size: 15
Created filesystem with 11/12800 inodes and 1865/51200 blocks
about to run program [/sbin/sleep] with 2 args
Creating filesystem with parameters:
Size: 2436890624
Block size: 4096
Blocks per group: 32768
Inodes per group: 7840
Inode size: 256
Journal blocks: 9296
Label:
Blocks: 594944
Block groups: 19
Reserved block group size: 151
Created filesystem with 11/148960 inodes and 19565/594944 blocks
about to run program [/sbin/sleep] with 2 args
mount: failed to mount /dev/block/mmcblk0p25 at /data: Device or resource busy
(data is mounted already)
about to run program [/tmp/wipe.sh] with 1 args
about to run program [/sbin/e2fsck] with 3 args
/dev/block/mmcblk0p23: clean, 11/148960 files, 19565/594944 blocks
about to run program [/sbin/e2fsck] with 3 args
/dev/block/mmcblk0p24: clean, 11/12800 files, 1865/51200 blocks
about to run program [/sbin/e2fsck] with 3 args
/sbin/e2fsck: Device or resource busy while trying to open /dev/block/mmcblk0p25
Filesystem mounted or opened exclusively by another program?
run_program: child exited with status 8
about to run program [/sbin/sleep] with 2 args
>>> Writing Data & System
mount: failed to mount /dev/block/mmcblk0p25 at /data: Device or resource busy
(data is mounted already)
Extract: /data/app/PerformanceControl-2.1.11.apk
Extract: /data/app/com.mobisystems.fileman.apk
Extract: /data/app/de.robv.android.xposed.installer_v28_8b8a7e.apk
unmount of /system failed; no such volume
(system is unmounted already)
Creating filesystem with parameters:
Size: 2436890624
Block size: 4096
Blocks per group: 32768
Inodes per group: 7840
Inode size: 256
Journal blocks: 9296
Label:
Blocks: 594944
Block groups: 19
Reserved block group size: 151
Created filesystem with 11/148960 inodes and 19565/594944 blocks
>>> Installing Softkey dpi 48
>>> Installing ads remover
Extract: /system/etc/hosts
>>> Installing Beats Audio
Extract: /system/bin/alsa_amixer
Extract: /system/bin/alsa_aplay
Extract: /system/bin/alsa_ctl
Extract: /system/bin/sox
Extract: /system/etc/AudioBTID.csv
Extract: /system/etc/AudioBTIDnew.csv
Extract: /system/etc/asound.conf
Extract: /system/etc/audio_effects.conf
Extract: /system/etc/hldm.bin
Extract: /system/etc/hltof.bin
Extract: /system/etc/hltrd.bin
Extract: /system/etc/image_beatbox_bt.bin
Extract: /system/etc/image_beats_speaker.bin
Extract: /system/etc/image_beats_wireless_bt.bin
Extract: /system/etc/image_gec.bin
Extract: /system/etc/image_gec_2vol.bin
Extract: /system/etc/image_gec_bt.bin
Extract: /system/etc/image_htc_earbud.bin
Extract: /system/etc/image_htc_earbud_2vol.bin
Extract: /system/etc/image_htc_midtier.bin
Extract: /system/etc/image_htc_midtier_2vol.bin
Extract: /system/etc/image_ibeats.bin
Extract: /system/etc/image_ibeats_2vol.bin
Extract: /system/etc/image_ibeats_solo.bin
Extract: /system/etc/image_ibeats_solo_2vol.bin
Extract: /system/etc/image_ibeats_solo_v2.bin
Extract: /system/etc/image_ibeats_solo_v2_2vol.bin
Extract: /system/etc/image_ibeats_v2.bin
Extract: /system/etc/image_ibeats_v2_2vol.bin
Extract: /system/etc/sound_mfg.txt
Extract: /system/etc/sound_mfg_DMIC.txt
Extract: /system/etc/soundimage/srs_bypass.cfg
Extract: /system/etc/soundimage/srs_geq10.cfg
Extract: /system/etc/soundimage/srs_global.cfg
Extract: /system/etc/soundimage/srsfx_trumedia_51.cfg
Extract: /system/etc/soundimage/srsfx_trumedia_movie.cfg
Extract: /system/etc/soundimage/srsfx_trumedia_music.cfg
Extract: /system/etc/soundimage/srsfx_trumedia_voice.cfg
Extract: /system/lib/libasound.so
Extract: /system/lib/libaudcal.so
Extract: /system/lib/libbeat.so
Extract: /system/lib/libbeatscorehtc.so
Extract: /system/lib/libmlplatform.so
Extract: /system/lib/libmm-abl-oem.so
Extract: /system/lib/libmm-abl.so
Extract: /system/lib/libmm-audio-resampler.so
Extract: /system/lib/libsrsprocessing.so
Extract: /system/lib/soundfx/libaudiopreprocessing.so
Extract: /system/lib/soundfx/libbeatsbass.so
Extract: /system/lib/soundfx/libbundlewrapper.so
Extract: /system/lib/soundfx/libdownmix.so
Extract: /system/lib/soundfx/libeffectproxy.so
Extract: /system/lib/soundfx/libfmas.so
Extract: /system/lib/soundfx/libicxposteffect.so
Extract: /system/lib/soundfx/libicxpreeffect.so
Extract: /system/lib/soundfx/libldnhncr.so
Extract: /system/lib/soundfx/libreverbwrapper.so
Extract: /system/lib/soundfx/libsrsfx.so
Extract: /system/lib/soundfx/libvisualizer.so
Extract: /system/usr/share/alsa/alsa.conf
Extract: /system/usr/share/alsa/cards/aliases.conf
Extract: /system/usr/share/alsa/pcm/center_lfe.conf
Extract: /system/usr/share/alsa/pcm/default.conf
Extract: /system/usr/share/alsa/pcm/dmix.conf
Extract: /system/usr/share/alsa/pcm/dpl.conf
Extract: /system/usr/share/alsa/pcm/dsnoop.conf
Extract: /system/usr/share/alsa/pcm/front.conf
Extract: /system/usr/share/alsa/pcm/iec958.conf
Extract: /system/usr/share/alsa/pcm/modem.conf
Extract: /system/usr/share/alsa/pcm/rear.conf
Extract: /system/usr/share/alsa/pcm/side.conf
Extract: /system/usr/share/alsa/pcm/surround40.conf
Extract: /system/usr/share/alsa/pcm/surround41.conf
Extract: /system/usr/share/alsa/pcm/surround50.conf
Extract: /system/usr/share/alsa/pcm/surround51.conf
Extract: /system/usr/share/alsa/pcm/surround71.conf
Extract: /system/usr/share/audio_dac/limiter_1237.tbl
Extract: /system/usr/share/audio_dac/limiter_1237_cew.tbl
Extract: /system/usr/share/audio_dac/ov_1237.tbl
Extract: /system/usr/share/audio_dac/ov_1237_cew.tbl
Extract: /system/vendor/etc/ICX1237_A2DP.bin
Extract: /system/vendor/etc/ICX1237_A2DP.elvl
Extract: /system/vendor/etc/ICX1237_HP.bin
Extract: /system/vendor/etc/ICX1237_HP.elvl
Extract: /system/vendor/etc/ICX1237_ICX1230.bin
Extract: /system/vendor/etc/ICX1237_ICX1230.elvl
Extract: /system/vendor/etc/ICX1237_ICX1230.prm
Extract: /system/vendor/etc/ICX1237_ICX1230_HR_44100.lps
Extract: /system/vendor/etc/ICX1237_ICX1230_STD_44100.lps
Extract: /system/vendor/etc/ICX1237_NC200_HR_176400.lps
Extract: /system/vendor/etc/ICX1237_NC200_HR_192000.lps
Extract: /system/vendor/etc/ICX1237_NC200_HR_44100.lps
Extract: /system/vendor/etc/ICX1237_NC200_HR_48000.lps
Extract: /system/vendor/etc/ICX1237_NC200_HR_88200.lps
Extract: /system/vendor/etc/ICX1237_NC200_HR_96000.lps
Extract: /system/vendor/etc/ICX1237_NC200_STD_44100.lps
Extract: /system/vendor/etc/ICX1237_NC31E_HR_176400.lps
Extract: /system/vendor/etc/ICX1237_NC31E_HR_192000.lps
Extract: /system/vendor/etc/ICX1237_NC31E_HR_44100.lps
Extract: /system/vendor/etc/ICX1237_NC31E_HR_48000.lps
Extract: /system/vendor/etc/ICX1237_NC31E_HR_88200.lps
Extract: /system/vendor/etc/ICX1237_NC31E_HR_96000.lps
Extract: /system/vendor/etc/ICX1237_NC31E_STD_44100.lps
Extract: /system/vendor/etc/ICX1237_NC31_HR_176400.lps
Extract: /system/vendor/etc/ICX1237_NC31_HR_192000.lps
Extract: /system/vendor/etc/ICX1237_NC31_HR_44100.lps
Extract: /system/vendor/etc/ICX1237_NC31_HR_48000.lps
Extract: /system/vendor/etc/ICX1237_NC31_HR_88200.lps
Extract: /system/vendor/etc/ICX1237_NC31_HR_96000.lps
Extract: /system/vendor/etc/ICX1237_NC31_STD_44100.lps
Extract: /system/vendor/etc/ICX1237_SP.bin
Extract: /system/vendor/etc/ICX1237_SP.elvl
Extract: /system/vendor/etc/ICX1237_SP.prm
Extract: /system/vendor/etc/ICX1237_SP_HR_44100.lps
Extract: /system/vendor/etc/ICX1237_SP_STD_44100.lps
Extract: /system/vendor/etc/audio_effects.conf
Extract: /system/vendor/etc/icx_audio_effects.conf
>>> Installing Volume Boost
Extract: /system/etc/mixer_paths.xml
>>> Creating toolbox symlinks
symlink(): created [/system/xbin]
symlink(): created [/system/fonts]
symlink(): created [/system/etc/firmware/ath6k]
symlink(): created [/system/etc/firmware/ath6k/AR6004]
symlink(): created [/system/etc/firmware/ath6k/AR6004/hw1.3]
symlink(): created [/system/etc/firmware/ath6k/AR6004/hw3.0]
symlink(): created [/system/etc/firmware/wcd9320]
symlink(): created [/system/lib/modules]
symlink(): created [/system/etc/firmware/wlan]
>>> Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Sat Apr 26 11:26:15 2014
the full log is atthached
Is my internal storage damaged?

Try re download ROM, and check MD5.
Installed v3, still getting "status 7" error. Tried to install over 1.4, even done full wipe and tried install. Errors out whichever way I do it
Click to expand...
Click to collapse
Solved. 7-Zip hadn't extracted properly. Re-downloaded and extracted again. Seems to have installed fine with DoomKernel V2.
Click to expand...
Click to collapse
http://forum.xda-developers.com/xpe...-v10-jb-4-3-10-4-b-0-569-fast-t2167064/page51

Try re download ROM, and check MD5.
Ty :laugh: is working now

[06/23][JB][FixScreenShot]AndyJellyBean│To stability as the highest guiding principle

[06/23][JB][FixScreenShot]AndyJellyBean│To stability as the highest guiding principle
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Smooth,Fast and Stable's ROM
The World"s First Android Touch And Customizable ROM Installer.
ROM basic message:
Android Version: Android 4.1.2
The version number: 6.2.B.1.96
The final version: AndyJellyBean
Device: Sony Lt26w
Unlock requirements: unlock / unlocked
Recommended Kernel: DooMKernel plus v1
Production Time: 06/23 final revision
maker: Andy881005
→ → → → Starting Forum: APK.tw ← ← ← ←
→ → → → Second Forum: XDA← ← ← ←
→ → → → To reprint, please by my consent ← ← ← ←
ROM Features:
System Part
-Base on Andy881005 ROM v5.0 final
-deodex all rom
-ROOT
-busybox
-zipalign
-init.d Optimization
-Build.prop Optimization
-Fly Engine v4.0 beta
-Moderate to streamline(about35app)
-Google Service
-Disable CPU Rendering
-Removal Off network-lift
Interface Part:
-All Xperia Z2(AROMA Can choose)
-Z2 wallpaper,icon,message,contact......app
-The Newest Theme Engine(Thanks to ExistenZ's maker:niaboc79
Media Part:
-PSA V7.7.1Z
-v4a fx/xhifi
-xperia z2 Walkman
-xperia z2 Album
-xperia z2 Video
-xperia z2 walkman tool
-Z2 S-force
More and more......waiting for you to explore!!!:laugh::laugh::laugh:
Rom Screenshot:
Thanks To:
tofupudding52
怀傑理奈
FX5280
ZeroInfinity
slsamg7112
XDA's God!!!
z7913852's AROMA
More people say countless of .....
Bug:
1) update chrome, play store, facebook app and the icon will changes back to the original
There are patches below!
2) Face Unlock FC
↑ ↑ ↑ ↑ i thinks is framework bug? ↑ ↑ ↑ ↑
3) Win8 Bug status bar has two bug:
- The top right corner of the remaining memory do not really look like
- Taskbar displays only the "press the home key" to leave the program App, press the return key to exit will not show
4)Some options icon is all white,i don't know how to deal with this ,but i think it's framework bug
like screenshot "鎖屏暫停RNG服務's icon:
ROM Download:
https://mega.co.nz/#!YoMHULIY!Uej_2RRruS01uraiGKYp-gw3HdPs1AC3D-Ja5jyqAx4
OK!Guys~I translate the Chinese aroma to English
Although it doesn't very well,but I think it's enough!
https://mega.co.nz/#!N10G1DAS!Di2t3LRKjWBqZ1fthJaZH0rIwRTQbF9UZUL2dPJuMaA
And how to use?
Please download the Rom and WinRAR(Computer) or Zarchiver(Phone)
Open the Rom by WinRAR or zarchiver
and open META-INF/.../ as long as you see aroma-config
Add the English aroma-config in the rom
You can flash it with English interface
Warning:
I just translate the aroma-config
so the install page is Chinese...I'm really sorry
but not big deal
if this have any bug,please save log and report in the thread~~
ROM installation instructions:
unlocked bootload:
1 Download Rom and put the SD card
2 reboot into CWM
3.wipe data / factory reset
4.wipe cache partition
5.advanced
Select: wipe dalvik cache
6.mount and storage
Select: format system
7 flash AndyJellyBean
8 Reboot and enjoy!
locked bootload:
1 Download Rom and put the SD card
2 reboot into CWM
3.wipe data / factory reset
4.wipe cache partition
5.advanced
Select: wipe dalvik cache
6.mount and storage
Select: format system
7 flash AndyJellyBean
8 Long press the volume + and power key until your device shutdown
9 Open the flashtool and Ensure your device is in flashmode mode
10 Select 196ftf file
11.
Look to the right
kernel.sin not hook, hook up other
See below
Clear Data To hook, hook the other is not
12 side hold the volume - and a computer with a USB connection, LED lights green if the representative has entered Flashmode mode
13 Click to start flash
14 Finish and reboot
15 Enjoy! ! !
Warning:
1)First boot in bootanimation,you need to press Volume+ and power button to reboot your device
2)I'm sorry that AROMA options is Chinese not English,but i don't have any time to translation it,please forgive me (
Rom Note:
Q1: If you install the ROM and restart play after setting a white triangle, how to do?
A1: Do not panic, quietly waiting for a few minutes, he would jump out and then boot up.
Q2: If you reboot into CWM after discovery ran E: Can "t mount / cache / recovery / command ... words, how to do?
A2: Please wipe cache partition, and reboot in system,and wipe cache partition & wipe dalvik cache again in cwm
Q3: If you find it when entering the system, it is not smooth, how to do?
A3:
(1) Flash The Rom Again
(2) report in the thread
Q4: If after entering the system finds very smooth, very slippery, how to do?
A4: entering the post and give me a score below it - but please do not return, "so good/nice" thanks~
Q5: If you want to play Dragon puzzle, how UNROOT (thank sam595 offer?
A5: Please change the name of the xbin folder, all root programs will be able to go turn off the unroot
PS For questions please private him, I dont play it so I do not know ...
Q6: How to choose other than the system's own ringtones?
A6: first create a data sdcard folder called ringtones, then ringtones into that folder, press the selector into the top right corner of the music ringtone logo, you can choose it ~
Q7: Z1 camera how to use all black ... how to do?
A7: Please see this thread: http://apk.tw/thread-395852-1-1.html ~
More questions, waiting for your discovery and recovery~ :laugh::laugh::laugh:
ROM other resource:
The icon change's package:
http://pan.baidu.com/share/link?shareid=3832819877&uk=741841427
kernel hacker(DooMKernel's Option)(but it's Chinese i'm sorry )
https://mega.co.nz/#!khlESTgB!DWAklW2qF1iijcSrfcIZsWasLteCq3ouXaPV-2Xljgc
i'm sorry for my bad English,Please forgive me
:good::good::goodlease give me thank after use my ROM:good::good::good:
​​

good job !!
Fix link Screenshot plz !!!

Thank you

Feedbacks please!! im excited that my XAS will look like a Z2 if this rom will be very stable

aroma installer is 完全在中国 only who know chinese can install in normal way or use blind installation :/

radiocity966 said:
aroma installer is 完全在中国 only who know chinese can install in normal way or use blind installation :/
Click to expand...
Click to collapse
I'm update the English aroma page in "Rom download"
Please Check it ~~

I can't install Rom
here is the [0623]AndyJellybean.zip.log.txt
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : AndyJellybean
ROM Version : First&Final
ROM Author : Andy881005
Device : XperiaAcroS
Start at : Tue Jun 24 02:05:38 2014
installing samsung updater extensions
開始安裝AndyJellybean
如果最後未出現-安裝成功-此字樣表示安裝失敗，請按左下角-safe log-並進入帖子內回報（記得把save log的資料傳給我，讓我修正這些bug）
掛載...
about to run program [/sbin/busybox] with 3 args
mount: mounting /dev/block/mmcblk0p12 on /system failed: Device or resource busy
run_program: child exited with status 255
about to run program [/sbin/busybox] with 3 args
安裝ROM...
Extract: /system/ViPER4Android/Kernel/2x.wav
Extract: /system/ViPER4Android/Kernel/5x.wav
Extract: /system/ViPER4Android/Kernel/6.wav
Extract: /system/ViPER4Android/Kernel/Air.wav
Extract: /system/ViPER4Android/Kernel/Binaural.wav
Extract: /system/ViPER4Android/Kernel/Binaural2.wav
Extract: /system/ViPER4Android/Kernel/Binaural3.wav
Extract: /system/ViPER4Android/Kernel/Blackface
Extract: /system/ViPER4Android/Kernel/Blackface
Extract: /system/ViPER4Android/Kernel/Club
Extract: /system/ViPER4Android/Kernel/Club
Extract: /system/ViPER4Android/Kernel/DBX
Extract: /system/ViPER4Android/Kernel/DBX
Extract: /system/ViPER4Android/Kernel/DBX
Extract: /system/ViPER4Android/Kernel/Fender
Extract: /system/ViPER4Android/Kernel/Hotstudio.wav
Extract: /system/ViPER4Android/Kernel/JoeMeek
Extract: /system/ViPER4Android/Kernel/JoeMeek
Extract: /system/ViPER4Android/Kernel/JoeMeek
Extract: /system/ViPER4Android/Kernel/Line6
Extract: /system/ViPER4Android/Kernel/Marshall
Extract: /system/ViPER4Android/Kernel/Marshall
Extract: /system/ViPER4Android/Kernel/Marshall
Extract: /system/ViPER4Android/Kernel/Matchless
Extract: /system/ViPER4Android/Kernel/MetalEQ.wav
Extract: /system/ViPER4Android/Kernel/No
Extract: /system/ViPER4Android/Kernel/Pod
Extract: /system/ViPER4Android/Kernel/Pod
Extract: /system/ViPER4Android/Kernel/Pod
Extract: /system/ViPER4Android/Kernel/PopEQ.wav
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Tweed
Extract: /system/ViPER4Android/Kernel/Tweed
Extract: /system/ViPER4Android/Kernel/Unitpulse2K.wav
Extract: /system/ViPER4Android/Kernel/UnitpulseDirac.wav
Extract: /system/ViPER4Android/Kernel/Urei
Extract: /system/ViPER4Android/Kernel/Urei
Extract: /system/ViPER4Android/Kernel/Vox
Extract: /system/ViPER4Android/Kernel/Vox
Extract: /system/app/AccessoryKeyDispatcher.apk
Extract: /system/app/AntHalService.apk
Extract: /system/app/ApplicationsProvider.apk
Extract: /system/app/ArtFilterCamera.apk
Extract: /system/app/AudioEffectService.apk
Extract: /system/app/Backup-Restore.apk
Extract: /system/app/Backup-wizard.apk
Extract: /system/app/BackupRestoreConfirmation.apk
Extract: /system/app/Bluetooth.apk
Extract: /system/app/Browser.apk
Extract: /system/app/CPUControl.apk
Extract: /system/app/CalendarProvider.apk
Extract: /system/app/CameraCommon.apk
Extract: /system/app/CameraExtensionPermission.apk
Extract: /system/app/CdfInfoAccessor.apk
Extract: /system/app/CertInstaller.apk
- Install userdata...
mount: failed to mount /dev/block/mmcblk0p14 at /data: Device or resource busy
Extract: /data/Fly-On/01entropy.log
Extract: /data/Fly-On/02ram_manager.log
Extract: /data/Fly-On/03sdcardspeedfix.log
Extract: /data/Fly-On/04mediakiller.log
Extract: /data/Fly-On/05Governor_tweaks.log
Extract: /data/Fly-On/06fly_engine.log
Extract: /data/Fly-On/07sqlite_optimize.log
Extract: /data/Fly-On/08cleaner.log
Extract: /data/Fly-On/09zipalign.log
Extract: /data/Fly-On/10zipaligndata.log
Extract: /data/Fly-On/11touchscreen.log
Extract: /data/app/SDMounter.apk
Extract: /data/app/Seeder.apk
Extract: /data/app/mobi.infolife.taskmanagerpro-1.apk
Extract: /data/data/mobi.infolife.taskmanagerpro/databases/google_analytics_v2.db
Extract: /data/data/mobi.infolife.taskmanagerpro/databases/google_analytics_v2.db-journal
Extract: /data/data/mobi.infolife.taskmanagerpro/files/gaClientId
Extract: /data/data/mobi.infolife.taskmanagerpro/shared_prefs/iTag.xml
Extract: /data/data/mobi.infolife.taskmanagerpro/shared_prefs/mobi.infolife.taskmanagerpro_preferences.xml
- Flashing kernel
package_extract_file: no kernel.elf in package
Auto Flashing the FIXcwm package...
- Copying files...
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p12 on /system failed: Device or resource busy
run_program: child exited with status 255
Extract: /system/app/SmallApp-Calculator.apk
Extract: /system/app/SmallApp-Timer.apk
Extract: /system/app/SmallAppManagerService.apk
Extract: /system/app/SmallAppWidget.apk
Extract: /system/app/SmallAppsLauncher.apk
Extract: /system/framework/com.sony.smallapp.jar
Setting Up-Permission
symlink(): created [/system/fonts]
symlink(): created [/system/bin]
set_perm: chown of /system/bin/ip to 0 3003 failed: No such file or directory
set_perm: chmod of /system/bin/ip to 6755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Tue Jun 24 02:05:41 2014
Xperia World
Acro S (Hikari) jb .211 Rooted UB India
NTT Docomo platted ui home launcher JB
jealybean Tab 'n' Grid Theme ICS
New batteryicon statusbar ICS
Theme project "TRON" ICS
Don't forget to hit thanks!If you Like it

xperiaworld said:
I can't install Rom
here is the [0623]AndyJellybean.zip.log.txt
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : AndyJellybean
ROM Version : First&Final
ROM Author : Andy881005
Device : XperiaAcroS
Start at : Tue Jun 24 02:05:38 2014
installing samsung updater extensions
開始安裝AndyJellybean
如果最後未出現-安裝成功-此字樣表示安裝失敗，請按左下角-safe log-並進入帖子內回報（記得把save log的資料傳給我，讓我修正這些bug）
掛載...
about to run program [/sbin/busybox] with 3 args
mount: mounting /dev/block/mmcblk0p12 on /system failed: Device or resource busy
run_program: child exited with status 255
about to run program [/sbin/busybox] with 3 args
安裝ROM...
Extract: /system/ViPER4Android/Kernel/2x.wav
Extract: /system/ViPER4Android/Kernel/5x.wav
Extract: /system/ViPER4Android/Kernel/6.wav
Extract: /system/ViPER4Android/Kernel/Air.wav
Extract: /system/ViPER4Android/Kernel/Binaural.wav
Extract: /system/ViPER4Android/Kernel/Binaural2.wav
Extract: /system/ViPER4Android/Kernel/Binaural3.wav
Extract: /system/ViPER4Android/Kernel/Blackface
Extract: /system/ViPER4Android/Kernel/Blackface
Extract: /system/ViPER4Android/Kernel/Club
Extract: /system/ViPER4Android/Kernel/Club
Extract: /system/ViPER4Android/Kernel/DBX
Extract: /system/ViPER4Android/Kernel/DBX
Extract: /system/ViPER4Android/Kernel/DBX
Extract: /system/ViPER4Android/Kernel/Fender
Extract: /system/ViPER4Android/Kernel/Hotstudio.wav
Extract: /system/ViPER4Android/Kernel/JoeMeek
Extract: /system/ViPER4Android/Kernel/JoeMeek
Extract: /system/ViPER4Android/Kernel/JoeMeek
Extract: /system/ViPER4Android/Kernel/Line6
Extract: /system/ViPER4Android/Kernel/Marshall
Extract: /system/ViPER4Android/Kernel/Marshall
Extract: /system/ViPER4Android/Kernel/Marshall
Extract: /system/ViPER4Android/Kernel/Matchless
Extract: /system/ViPER4Android/Kernel/MetalEQ.wav
Extract: /system/ViPER4Android/Kernel/No
Extract: /system/ViPER4Android/Kernel/Pod
Extract: /system/ViPER4Android/Kernel/Pod
Extract: /system/ViPER4Android/Kernel/Pod
Extract: /system/ViPER4Android/Kernel/PopEQ.wav
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Tweed
Extract: /system/ViPER4Android/Kernel/Tweed
Extract: /system/ViPER4Android/Kernel/Unitpulse2K.wav
Extract: /system/ViPER4Android/Kernel/UnitpulseDirac.wav
Extract: /system/ViPER4Android/Kernel/Urei
Extract: /system/ViPER4Android/Kernel/Urei
Extract: /system/ViPER4Android/Kernel/Vox
Extract: /system/ViPER4Android/Kernel/Vox
Extract: /system/app/AccessoryKeyDispatcher.apk
Extract: /system/app/AntHalService.apk
Extract: /system/app/ApplicationsProvider.apk
Extract: /system/app/ArtFilterCamera.apk
Extract: /system/app/AudioEffectService.apk
Extract: /system/app/Backup-Restore.apk
Extract: /system/app/Backup-wizard.apk
Extract: /system/app/BackupRestoreConfirmation.apk
Extract: /system/app/Bluetooth.apk
Extract: /system/app/Browser.apk
Extract: /system/app/CPUControl.apk
Extract: /system/app/CalendarProvider.apk
Extract: /system/app/CameraCommon.apk
Extract: /system/app/CameraExtensionPermission.apk
Extract: /system/app/CdfInfoAccessor.apk
Extract: /system/app/CertInstaller.apk
- Install userdata...
mount: failed to mount /dev/block/mmcblk0p14 at /data: Device or resource busy
Extract: /data/Fly-On/01entropy.log
Extract: /data/Fly-On/02ram_manager.log
Extract: /data/Fly-On/03sdcardspeedfix.log
Extract: /data/Fly-On/04mediakiller.log
Extract: /data/Fly-On/05Governor_tweaks.log
Extract: /data/Fly-On/06fly_engine.log
Extract: /data/Fly-On/07sqlite_optimize.log
Extract: /data/Fly-On/08cleaner.log
Extract: /data/Fly-On/09zipalign.log
Extract: /data/Fly-On/10zipaligndata.log
Extract: /data/Fly-On/11touchscreen.log
Extract: /data/app/SDMounter.apk
Extract: /data/app/Seeder.apk
Extract: /data/app/mobi.infolife.taskmanagerpro-1.apk
Extract: /data/data/mobi.infolife.taskmanagerpro/databases/google_analytics_v2.db
Extract: /data/data/mobi.infolife.taskmanagerpro/databases/google_analytics_v2.db-journal
Extract: /data/data/mobi.infolife.taskmanagerpro/files/gaClientId
Extract: /data/data/mobi.infolife.taskmanagerpro/shared_prefs/iTag.xml
Extract: /data/data/mobi.infolife.taskmanagerpro/shared_prefs/mobi.infolife.taskmanagerpro_preferences.xml
- Flashing kernel
package_extract_file: no kernel.elf in package
Auto Flashing the FIXcwm package...
- Copying files...
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p12 on /system failed: Device or resource busy
run_program: child exited with status 255
Extract: /system/app/SmallApp-Calculator.apk
Extract: /system/app/SmallApp-Timer.apk
Extract: /system/app/SmallAppManagerService.apk
Extract: /system/app/SmallAppWidget.apk
Extract: /system/app/SmallAppsLauncher.apk
Extract: /system/framework/com.sony.smallapp.jar
Setting Up-Permission
symlink(): created [/system/fonts]
symlink(): created [/system/bin]
set_perm: chown of /system/bin/ip to 0 3003 failed: No such file or directory
set_perm: chmod of /system/bin/ip to 6755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Tue Jun 24 02:05:41 2014
Click to expand...
Click to collapse
Did you try flashing the kernel first?
Sent from my Nexus 7 2013 LTE using Tapatalk

teddy0209 said:
Did you try flashing the kernel first?
Sent from my Nexus 7 2013 LTE using Tapatalk
Click to expand...
Click to collapse
How to flash Kernel sapretly when flash aroma first it's shows select Kernel...so every time it's flash Kernel

xperiaworld said:
I can't install Rom
here is the [0623]AndyJellybean.zip.log.txt
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : AndyJellybean
ROM Version : First&Final
ROM Author : Andy881005
Device : XperiaAcroS
Start at : Tue Jun 24 02:05:38 2014
installing samsung updater extensions
開始安裝AndyJellybean
如果最後未出現-安裝成功-此字樣表示安裝失敗,請按左下角-safe log-並進入帖子內回報(記得把save log的資料傳給我,讓我修正這些bug)
掛載...
about to run program [/sbin/busybox] with 3 args
mount: mounting /dev/block/mmcblk0p12 on /system failed: Device or resource busy
run_program: child exited with status 255
about to run program [/sbin/busybox] with 3 args
安裝ROM...
Extract: /system/ViPER4Android/Kernel/2x.wav
Extract: /system/ViPER4Android/Kernel/5x.wav
Extract: /system/ViPER4Android/Kernel/6.wav
Extract: /system/ViPER4Android/Kernel/Air.wav
Extract: /system/ViPER4Android/Kernel/Binaural.wav
Extract: /system/ViPER4Android/Kernel/Binaural2.wav
Extract: /system/ViPER4Android/Kernel/Binaural3.wav
Extract: /system/ViPER4Android/Kernel/Blackface
Extract: /system/ViPER4Android/Kernel/Blackface
Extract: /system/ViPER4Android/Kernel/Club
Extract: /system/ViPER4Android/Kernel/Club
Extract: /system/ViPER4Android/Kernel/DBX
Extract: /system/ViPER4Android/Kernel/DBX
Extract: /system/ViPER4Android/Kernel/DBX
Extract: /system/ViPER4Android/Kernel/Fender
Extract: /system/ViPER4Android/Kernel/Hotstudio.wav
Extract: /system/ViPER4Android/Kernel/JoeMeek
Extract: /system/ViPER4Android/Kernel/JoeMeek
Extract: /system/ViPER4Android/Kernel/JoeMeek
Extract: /system/ViPER4Android/Kernel/Line6
Extract: /system/ViPER4Android/Kernel/Marshall
Extract: /system/ViPER4Android/Kernel/Marshall
Extract: /system/ViPER4Android/Kernel/Marshall
Extract: /system/ViPER4Android/Kernel/Matchless
Extract: /system/ViPER4Android/Kernel/MetalEQ.wav
Extract: /system/ViPER4Android/Kernel/No
Extract: /system/ViPER4Android/Kernel/Pod
Extract: /system/ViPER4Android/Kernel/Pod
Extract: /system/ViPER4Android/Kernel/Pod
Extract: /system/ViPER4Android/Kernel/PopEQ.wav
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/SPL
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Studer
Extract: /system/ViPER4Android/Kernel/Tweed
Extract: /system/ViPER4Android/Kernel/Tweed
Extract: /system/ViPER4Android/Kernel/Unitpulse2K.wav
Extract: /system/ViPER4Android/Kernel/UnitpulseDirac.wav
Extract: /system/ViPER4Android/Kernel/Urei
Extract: /system/ViPER4Android/Kernel/Urei
Extract: /system/ViPER4Android/Kernel/Vox
Extract: /system/ViPER4Android/Kernel/Vox
Extract: /system/app/AccessoryKeyDispatcher.apk
Extract: /system/app/AntHalService.apk
Extract: /system/app/ApplicationsProvider.apk
Extract: /system/app/ArtFilterCamera.apk
Extract: /system/app/AudioEffectService.apk
Extract: /system/app/Backup-Restore.apk
Extract: /system/app/Backup-wizard.apk
Extract: /system/app/BackupRestoreConfirmation.apk
Extract: /system/app/Bluetooth.apk
Extract: /system/app/Browser.apk
Extract: /system/app/CPUControl.apk
Extract: /system/app/CalendarProvider.apk
Extract: /system/app/CameraCommon.apk
Extract: /system/app/CameraExtensionPermission.apk
Extract: /system/app/CdfInfoAccessor.apk
Extract: /system/app/CertInstaller.apk
- Install userdata...
mount: failed to mount /dev/block/mmcblk0p14 at /data: Device or resource busy
Extract: /data/Fly-On/01entropy.log
Extract: /data/Fly-On/02ram_manager.log
Extract: /data/Fly-On/03sdcardspeedfix.log
Extract: /data/Fly-On/04mediakiller.log
Extract: /data/Fly-On/05Governor_tweaks.log
Extract: /data/Fly-On/06fly_engine.log
Extract: /data/Fly-On/07sqlite_optimize.log
Extract: /data/Fly-On/08cleaner.log
Extract: /data/Fly-On/09zipalign.log
Extract: /data/Fly-On/10zipaligndata.log
Extract: /data/Fly-On/11touchscreen.log
Extract: /data/app/SDMounter.apk
Extract: /data/app/Seeder.apk
Extract: /data/app/mobi.infolife.taskmanagerpro-1.apk
Extract: /data/data/mobi.infolife.taskmanagerpro/databases/google_analytics_v2.db
Extract: /data/data/mobi.infolife.taskmanagerpro/databases/google_analytics_v2.db-journal
Extract: /data/data/mobi.infolife.taskmanagerpro/files/gaClientId
Extract: /data/data/mobi.infolife.taskmanagerpro/shared_prefs/iTag.xml
Extract: /data/data/mobi.infolife.taskmanagerpro/shared_prefs/mobi.infolife.taskmanagerpro_preferences.xml
- Flashing kernel
package_extract_file: no kernel.elf in package
Auto Flashing the FIXcwm package...
- Copying files...
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p12 on /system failed: Device or resource busy
run_program: child exited with status 255
Extract: /system/app/SmallApp-Calculator.apk
Extract: /system/app/SmallApp-Timer.apk
Extract: /system/app/SmallAppManagerService.apk
Extract: /system/app/SmallAppWidget.apk
Extract: /system/app/SmallAppsLauncher.apk
Extract: /system/framework/com.sony.smallapp.jar
Setting Up-Permission
symlink(): created [/system/fonts]
symlink(): created [/system/bin]
set_perm: chown of /system/bin/ip to 0 3003 failed: No such file or directory
set_perm: chmod of /system/bin/ip to 6755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Tue Jun 24 02:05:41 2014
Click to expand...
Click to collapse
hmmm...it's look like some file doesn't install in your device
it's just install system/app's file and didn't install other like bin/etc/lib...
so when set up permission
aroma can't find file to set
be sure you are 3wipe & format system
and please use recovery's mount/system
because it's something fail in it:
mount: mounting /dev/block/mmcblk0p12 on /system.
→→→→→failed: Device or resource busy←←←←←←
I really thanks you for using my Rom
and I'm sorry for my bad English
I hope you can know what I means~

xperiaworld said:
How to flash Kernel sapretly when flash aroma first it's shows select Kernel...so every time it's flash Kernel
Click to expand...
Click to collapse
this is 4.1 stock based, so flashing a a stock based 4.1 kernel should do...

andy881005 said:
hmmm...it's look like some file doesn't install in your device
it's just install system/app's file and didn't install other like bin/etc/lib...
so when set up permission
aroma can't find file to set
be sure you are 3wipe & format system
and please use recovery's mount/system
because it's something fail in it:
mount: mounting /dev/block/mmcblk0p12 on /system.
→→→→→failed: Device or resource busy←←←←←←
I really thanks you for using my Rom
and I'm sorry for my bad English
I hope you can know what I means~
Click to expand...
Click to collapse
Thanks I 'll try this...
Edited: even I mount system first then flash aroma but same things happen... Not working...
Xperia World
Acro S (Hikari)Rooted UB India
NTT Docomo platted ui home launcher JB
jealybean Tab 'n' Grid Theme ICS
New batteryicon statusbar ICS
Theme project "TRON" ICS
Don't forget to hit thanks!If you Like it

Can I see the screenshot of this ROM? Is Z2 SystemUI included?
Anyway thanks for your awesome work. :good:

toylee1992 said:
Can I see the screenshot of this ROM? Is Z2 SystemUI included?
Anyway thanks for your awesome work. :good:
Click to expand...
Click to collapse
Oh!
I'm sorry that DropBox's pic died...
I'll fix it soon!
yes!u can choose in aroma!
the formal setting is z2 style+win8 recent
I think u will like it
the other choose doesn't like z2 battery
but if u don't like win8 recent
it's nice,too.
and thanks to use my rom~

xperiaworld said:
Thanks I 'll try this...
Edited: even I mount system first then flash aroma but same things happen... Not working...
Xperia World
Acro S (Hikari)Rooted UB India
NTT Docomo platted ui home launcher JB
jealybean Tab 'n' Grid Theme ICS
New batteryicon statusbar ICS
Theme project "TRON" ICS
Don't forget to hit thanks!If you Like it
Click to expand...
Click to collapse
oh!
that's sound bad...
hmmm...I think you need to change the kernel to flash...
you can use doomkernel in my Rom
plz use winrar/other zip app to take them in andy/kernel/doomkernel/kernel.elf
I suggest you use Quickimg to flash the kernel
goodluck~

andy881005 said:
oh!
that's sound bad...
hmmm...I think you need to change the kernel to flash...
you can use doomkernel in my Rom
plz use winrar/other zip app to take them in andy/kernel/doomkernel/kernel.elf
I suggest you use Quickimg to flash the kernel
goodluck~
Click to expand...
Click to collapse
I also do that Flash doomkernel first then flash but same thing happen.
Xperia World
Acro S (Hikari)Rooted UB India
NTT Docomo platted ui home launcher JB
jealybean Tab 'n' Grid Theme ICS
New batteryicon statusbar ICS
Theme project "TRON" ICS
Don't forget to hit thanks!If you Like it

andy881005 said:
Oh!
I'm sorry that DropBox's pic died...
I'll fix it soon!
yes!u can choose in aroma!
the formal setting is z2 style+win8 recent
I think u will like it
the other choose doesn't like z2 battery
but if u don't like win8 recent
it's nice,too.
and thanks to use my rom~
Click to expand...
Click to collapse
I wanna try the rom this weekend, but couldn't download... =(
Edit: Working now... Just waiting to complete... =)

xperiaworld said:
I also do that Flash doomkernel first then flash but same thing happen.
Xperia World
Acro S (Hikari)Rooted UB India
NTT Docomo platted ui home launcher JB
jealybean Tab 'n' Grid Theme ICS
New batteryicon statusbar ICS
Theme project "TRON" ICS
Don't forget to hit thanks!If you Like it
Click to expand...
Click to collapse
hmmm...that's really sound bad....
can u port your aroma log after flash doomkernel?
if the question is can't mount system
don't post it~
and you can try both cwm or TWRP recovery to flash it

xperiaworld said:
I also do that Flash doomkernel first then flash but same thing happen.
Click to expand...
Click to collapse
Flashing a 4.1 kernel first should work, manually mount the system and format it... I used bpauls light kernel before flashing the rom..., but I reflashed and used extrasmoothv2 to change boot animation to black, and it also works... Now I'm using Doomkernel...
All I can say is, Nice and smooth UI, a lot of themes to choose from... Thanks for sharing andy!!! =)
Sent from my Nexus 7 2013 LTE using Tapatalk

Hello @andy881005 thanks for sharing your awesome ROM, some apps and win8 recent are having some Chinese words. But it's quite fast and stable and has beautiful interface. Kudos! :highfive:
Edit : How to remove wake up device by camera button?

Help with error, Install Elemental X Nexus 7

Hi every one,
I hope you can help me, Im trying to install Elemental X kernel in my Nexus 7 but always get the same error.
this is the error.
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : ElementalX
ROM Version : 4.05
ROM Author : flar2
Device : Nexus 7 (2013)
Start at : Wed Jun 24 22:27:33 2020
installing samsung updater extensions
Installing ElementalX...
CPU optimization: elementalx
Stock voltage
GPU overclock to 450MHz
default thermal throttling
ROW i/o scheduler
readahead 512
USB fastcharge enabled
OTG+Charge mode enabled
Extract: /tmp/buildconfig.sh
Extract: /tmp/busybox
Extract: /tmp/elementalx.conf
Extract: /tmp/systemcheck.sh
Mounting /system
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: No such file or directory
Cleaning up
about to run program [/tmp/systemcheck.sh] with 1 args
cp: can't create '/system/xbin/busybox': No such file or directory
chmod: /system/xbin/busybox: No such file or directory
/tmp/systemcheck.sh: line 7: /system/xbin/busybox: not found
mkdir: can't create directory '/system/etc/init.d': No such file or directory
cp: can't create '/system/etc/elementalx.conf': No such file or directory
run_program: child exited with status 1
Installing system files
Extract: /system/bin/fstrim
Extract: /system/bin/mpdecision
Extract: /system/bin/thermald.bak
Extract: /system/lib/hw/power.msm8960.so
Extract: /system/lib/modules/exfat.ko
about to run program [/tmp/buildconfig.sh] with 1 args
sh: 1: unknown operand
sh: 2: unknown operand
sh: 3: unknown operand
sh: 4: unknown operand
sh: 5: unknown operand
about to run program [/tmp/busybox] with 4 args
cp: can't create '/system/etc/elementalx.conf': Path does not exist
run_program: child exited with status 1
set_perm: chown of /system/etc/elementalx.conf to 0 0 failed: No such file or directory
set_perm: chmod of /system/etc/elementalx.conf to 666 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Wed Jun 24 22:27:34 2020

repartition to increase partition system perhaps!

Elemental X was great but you want to update to Follow MSI's work, he's done some awesome things and has his own kernel which is better/updated to elemental
Grab the lineageos 17.1 for it and follow msi's kernel rocking and it's like a 7 year old tablet better than anything new, OTG with charging and completely stable. Then add Magisk with EdExtended so you can install GravityBox for other tweaks and use SmartPack to turn on knock to wake/sleep and fastcharge, etc.
https://forum.xda-developers.com/nexus-7-2013/development/rom-lineageos-17-1-t4038425
https://forum.xda-developers.com/nexus-7-2013/development/rom-t3569067
https://lineageos.wickenberg.nu/flo/
https://drive.google.com/drive/folders/0By6p5AdQfavBUlhsLWFHZThGTnM?usp=drive_open
and yes you have to do the partition resize for the new TWRP before you do any of this, just set aside and hour, read all the instructions and do it step by step and you are done