Develop Bugs

Xiaomi redmi 1s while flashing stops at like 14%

Hi,
I got one xiaomi redmi 1s rebooting, I hardest but not working
, so i decided to flash, via fastboot while flashing it stops in 14%.
now phone doesn't power on, while inserting usb, it detect as qualcomm usb in device manager comport.
Need help. how to revive.

riteshgpt60 said:
Hi,
I got one xiaomi redmi 1s rebooting, I hardest but not working
, so i decided to flash, via fastboot while flashing it stops in 14%.
now phone doesn't power on, while inserting usb, it detect as qualcomm usb in device manager comport.
Need help. how to revive.
Click to expand...
Click to collapse
Try Here
Read whole first, then give a try.

presetz said:
Try Here
Read whole first, then give a try.
Click to expand...
Click to collapse
Any one please share me tested solution with easy tutuorial.

riteshgpt60 said:
Any one please share me tested solution with easy tutuorial.
Click to expand...
Click to collapse
Have you read it? If its still not an easy way as it written, than might be someone can.
Sorry just tried to help.
Good luck sir.

presetz said:
Have you read it? If its still not an easy way as it written, than might be someone can.
Sorry just tried to help.
Good luck sir.
Click to expand...
Click to collapse
Hi, I finally flash with this file "armani_global_images_JHCMIBL50.0_4.3_in_111a6a27b4" and flashing process goes fine ,after flash it says to press f8 and I press OK buttom while holding f8 and PC restart, as software
Now phone shows little bip light in home button .
And now it doesn't shows qualcomm device as well, I think, boot is repair but fastboot mode not coming.
Need help.

riteshgpt60 said:
Hi, I finally flash with this file "armani_global_images_JHCMIBL50.0_4.3_in_111a6a27b4" and flashing process goes fine ,after flash it says to press f8 and I press OK buttom while holding f8 and PC restart, as software
Now phone shows little bip light in home button .
And now it doesn't shows qualcomm device as well, I think, boot is repair but fastboot mode not coming.
Need help.
Click to expand...
Click to collapse
Try previous version than 50, might be the 45 as it stable enough, i guess.
And before that, have you charged your phone? Mi recovery wont boot if under 20% battery.

presetz said:
Try previous version than 50, might be the 45 as it stable enough, i guess.
And before that, have you charged your phone? Mi recovery wont boot if under 20% battery.
Click to expand...
Click to collapse
Hi,
After flashing v50, the phone should be working, right?
Im downloading v45, but phone is not detecting with pc . no fastboot , no qualcomm usb , How can I flash now.
thank for guiding.

riteshgpt60 said:
Hi,
After flashing v50, the phone should be working, right?
Im downloading v45, but phone is not detecting with pc . no fastboot , no qualcomm usb , How can I flash now.
thank for guiding.
Click to expand...
Click to collapse
You said the led blinking a litte red light? Try to charged first till its more than 30% batt, and connect again. See if it show in pc

Thanks done after flashing v45

riteshgpt60 said:
Thanks done after flashing v45
Click to expand...
Click to collapse
Im glad to hear that, what an awesome experienced you got isnt it? At least you can learnt something from it

Hard brick P2

Hey guys, I accidentally deleted bootloader of my Lenovo p2....doesn't turn on now...only red led blinks when connected to PC...and PC is able to detect a connected device..but can't use adb....any hope for my device?

kirtikhurana said:
https://forum.xda-developers.com/lenovo-p2/how-to/how-to-restore-lenovo-p2-hard-brick-t3652900
Click to expand...
Click to collapse
Are you able to run this:
https://www.youtube.com/watch?v=-b7bx7Dl17w
That fixed my bootloop but I didn't remove the bootloader. You might be able to get in via the USB drivers in that video URL. Qualcomm_USB_Driver_2.2.0.0_Setup dot exe

Solved
kirtikhurana said:
https://forum.xda-developers.com/lenovo-p2/how-to/how-to-restore-lenovo-p2-hard-brick-t3652900
Click to expand...
Click to collapse
Thank youuuuuu so much... It worked... When I ran the blank flash file, the phone went into fastboot and I could load the bootloader and flash the ROM and recovery again...thank you...but I'm facing a problem of charging...when I plug it in, it restarts itself and doesn't charge...Everytime I plug it in to charger, it just restarts...but thank u...it works atleast..

How did your mobile got Hard Brick ? Reason ?

Accidently flashed false firmware on Xiaomi Mi Mix 2, device is dead.

Device doesn't boot anymore but still is recognized by my computer. The led blinks for a few seconds when it charges or when the power button is pressed. If you know anything that could possibly solve my problem, please do not hesitate to answer.

Victimes16 said:
Devices doesn't boot anymore but still is recognized by my computer. The led blinks for a few seconds when it charges or when the power button is pressed. If you know anything that could possibly solve my problem, please do not hesitate to answer.
Click to expand...
Click to collapse
Which firmware did you flash?
What your pc recognises?
Have you tried the XiaoMiFlash tool?

t-shock said:
Which firmware did you flash?
What your pc recognises?
Have you tried the XiaoMiFlash tool?
Click to expand...
Click to collapse
From the Xiaomi Mi 5 I think. It only recognizes that a device is connected. I did not because adb didn't identify it anymore. But I'll try. Thanks for your help!

Victimes16 said:
From the Xiaomi Mi 5 I think. It only recognizes that a device is connected. I did not because adb didn't identify it anymore. But I'll try. Thanks for your help!
Click to expand...
Click to collapse
Does Device Manager shows anything? Even on the serial ports
XiaoMiTool will actually help

t-shock said:
Does Device Manager shows anything? Even on the serial ports
XiaoMiTool will actually help
Click to expand...
Click to collapse
No I think it doesn't. I'm not at home right now but I'll try it as soon as I am. I'm really thankful that you're trying to help me.
Greetings

RedMagic 5G Global Bricked in EDL mode

Hello,
I have a RM 5G bricked in EDL mode. It will not exit this mode, I have tried Vol up/Down and Power button and various other key combos for fastboot and recovery. Nothing works. Device manager does show it in Qualcomm 9008 mode. Can someone please post the Qfil file for this device. Or if anyone knows a way to get it out of this mode, I would appreciate a response/fix. Thanks

What have u try to do? Crossflash CN / EU Rom?

skydsler said:
What have u try to do? Crossflash CN / EU Rom?
Click to expand...
Click to collapse
It belongs to a friend of mine. I don't know what he did to it. he claims he tried to update it. Device was rooted but it shouldn't have bricked. Usually OTA update throws up an error and reboots while rooted. However in this case, it is stuck in edl with black screen. Needs QFIL file for this.

I am also in the same problem I put my EDL device but I know what I did type of my device red magic 5g global version Regarding red magic play 5g and I installed it on my device and the device became in the event of EDL and does not respond to all attempts, so what should I do and I am currently searching for unbrick red magic 5g and need it if it is available with you or another solution if it gets us out of EDL mode

There's no way out of edl mode, without an unbrick tool.

VZTech said:
There's no way out of edl mode, without an unbrick tool.
Click to expand...
Click to collapse
It's sad the phone is new and goes into the EDL case
Members await you more solutions and benefit in the near future
Thank you

rabunz1105 said:
Hello,
I have a RM 5G bricked in EDL mode. It will not exit this mode, I have tried Vol up/Down and Power button and various other key combos for fastboot and recovery. Nothing works. Device manager does show it in Qualcomm 9008 mode. Can someone please post the Qfil file for this device. Or if anyone knows a way to get it out of this mode, I would appreciate a response/fix. Thanks
Click to expand...
Click to collapse
Dear could you solve the problem with your phone and exit the edl mode ?
I am edl same situation and am looking for a solution..

Aboyousf said:
Dear could you solve the problem with your phone and exit the edl mode ?
I am edl same situation and am looking for a solution..
Click to expand...
Click to collapse
Hi, Same issue, no fix yet, waiting for Bricktool.

From what i have heard, nubia will be waiting a long time before releasing the tool. Anyone who is bricked, is out of luck for a long time.

is there any improvement?

rabunz1105 said:
Hello,
I have a RM 5G bricked in EDL mode. It will not exit this mode, I have tried Vol up/Down and Power button and various other key combos for fastboot and recovery. Nothing works. Device manager does show it in Qualcomm 9008 mode. Can someone please post the Qfil file for this device. Or if anyone knows a way to get it out of this mode, I would appreciate a response/fix. Thanks
Click to expand...
Click to collapse
Hello, I have the unbrick tool for RedMagic 5G and RedMagic 5G lite. You can repair your phone in edl mode. I am going to post it on the XDA forum, please follow me.

johnny886 said:
Hello, I have the unbrick tool for RedMagic 5G and RedMagic 5G lite. You can repair your phone in edl mode. I am going to post it on the XDA forum, please follow me.
Click to expand...
Click to collapse
Dear, it useless for me i contact you without real response, my phone was completely dead even its not recognized by the usb port i need a tool or a trick like jtag test port to force the device to switched on

Question Bricked Mi PAD 5 PRO CN

Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?

Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.

mkcs said:
Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.
Click to expand...
Click to collapse
Ahh thats the thing, it won't even power on now, i cannot even access fastboot

desyncccccccc said:
Ahh thats the thing, it won't even power on now, i cannot even access fastboot
Click to expand...
Click to collapse
long press "Volume Down" + "Power" for a few seconds at the same time and then release only"Power" once the fastboot logo appears, finally release "Volume Down" to enter the fastboot mode

Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com

Keyvannn said:
Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com
Click to expand...
Click to collapse
Yeah so the only problem with this is that mine won't even show up even though i have said drivers installed.. I'm starting to think it's hard bricked

Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap

Xiaomi needs a better way to unbrick its devices instead of Authorized Mi Accounts
Xiaomi has locked down the EDL mode on all of its devices, making it nigh impossible to unbrick a device without an Authorized Mi Account. Read on for more!
www.xda-developers.com

desyncccccccc said:
Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?
Click to expand...
Click to collapse
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.

mikefnz said:
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.
Click to expand...
Click to collapse
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life

fritzeman said:
Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap
Click to expand...
Click to collapse
Where would i be able to get in contact with someone like that??

desyncccccccc said:
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life
Click to expand...
Click to collapse
Try different cable & different pc usb slot?

Try flashing using * Xiaomi professional pro tools . Buy credit and all done,

mikefnz said:
Try different cable & different pc usb slot?
Click to expand...
Click to collapse
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead

desyncccccccc said:
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead
Click to expand...
Click to collapse
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....

mikefnz said:
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....
Click to expand...
Click to collapse
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully

desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing

desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?

mkcs said:
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing
Click to expand...
Click to collapse
Could you please link me one of those? I'm over in the EU so maybe they'll be fairly easy to find?

mikefnz said:
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?
Click to expand...
Click to collapse
Yeah, i've been doing all of that. I just now found out that there's an EDL cable specifically made for flashing in that mode