Related
Hello all, new here and I just purchased a Note 8 from Verizon. The device is paid off fully and i wish to use my T-Mobile simcard in it but it does not seem to be picking up a signal. I did update the verizon software to the latest version when i had my verizon sim card inserted. Verizon customer service told me i need to reset to factor setting then my t-mobile sim should work but this has not helped.
How can i get my t-mobile sim to work? Any help appreciated as i am new to android phones!
Thanks
Hi there, you must flash the new N950U1 2BQK1 or N950U 2BQK2 stock firmware to have full access of T-MOBILE Network. It's the only way it will work, I have AT&T NOTE 8 working on Verizon network with zero problem.
---------- Post added at 02:35 PM ---------- Previous post was at 02:31 PM ----------
It's a very easy process to flash the 4 US Carriers firmware, I have done it more than 50 times and I'm not a developer.
kdecoteau1 said:
Hi there, you must flash the new N950U1 2BQK1 or N950U 2BQK2 stock firmware to have full access of T-MOBILE Network. It's the only way it will work, I have AT&T NOTE 8 working on Verizon network with zero problem.
---------- Post added at 02:35 PM ---------- Previous post was at 02:31 PM ----------
It's a very easy process to flash the 4 US Carriers firmware, I have done it more than 50 times and I'm not a developer.
Click to expand...
Click to collapse
I would like to know where to get the firmware and with what do you flash it with? Is there a instructions thread or link.
It's been over 5 years since I have tinkered with a Samsung device.
Hi there. You'll need to have your Note 8 Bootloader version on level 2, meaning 2BQK2, 2BQJA or anything with 2 before the last 4 digits.
1) tmobile SIM card in device
2) Odin v3.12.7 make sure extract
3) 2BQK2 firmware extract all files
4) put all 4 set of firmware files in the right manner, bl,ap,cp and csc. Don't used home-csc only CSC.
Odin and firmware https://androidfilehost.com/?fid=673791459329067572 2BQK2
https://androidfilehost.com/?fid=962157660013069130 2BQL5
https://drive.google.com/open?id=1bRz4RQzmloSgsuYmyLu92cktT_f8hIYp
Unlock firmware
1) any carrier SIM card
2) Odin v3.12.5 Prince Comsey or modified Odin, make sure extract
3) 2BQK1 firmware, extract all files.
4) put all 4 set of firmware files in the right manner, bl,ap,cp and csc. Don't used home-csc only CSC
Odin and firmware https://androidfilehost.com/?fid=745849072291691586 2BQK1
https://androidfilehost.com/?fid=817906626617955896 2BQL2
https://drive.google.com/open?id=1Lw79Q5npvMRdME33-ioqy692ClZ36n4U
First instructions is for if you want stock US CARRIER BLOATWARE FIRMWARE, second instructions is if you want SAMSUNG STOCK FIRMWARE. Follow steps and everything will be fine, happy flashing.
So wait, I have a Verizon Note 8 (currently using MetroPCS perfectly), but I wanted a stock Samsung ROM (without the Verizon crap on it), I can just flash the second set of files instead and done with it?
Yes
Can I use a gsm sim card and a verizon sim card at the same time on verizon branded phone? I see you have to flash the firmware above but am wondering if this would help me.
So much misinformation in this thread.
I don't even know where to start:
The OP was asking why his T-Monile SIM wouldn't work. It doesnt matter which firmware you're on, if the Note 8 is unlocked (the Verizon Note 8 IS unlocked), and it has a clean IMEI, and your SIM is already activated, then it will get 4G LTE. I know. I have a Verizon Note 8, and use it on Tmobile. I used it for over 24 hours with my T-Mo SIM but running thr Verizon firmware with no issues. Only reason I flashed T-Mobile firmware was to rid myself of Verizon bloat and to get wifi calling.
As far as bootloader, that has no effect on the SIM card working. The OP would need a v2 bootloader firmware if his current firmwarealso had the v2 bootload. It probably does, so thats a moot point, but the implication was the v2 bootloader was the only one that would make his SIM work.
I hope the OP got it all figured out.
mmdpkaaa said:
Hello all, new here and I just purchased a Note 8 from Verizon. The device is paid off fully and i wish to use my T-Mobile simcard in it but it does not seem to be picking up a signal. I did update the verizon software to the latest version when i had my verizon sim card inserted. Verizon customer service told me i need to reset to factor setting then my t-mobile sim should work but this has not helped.
How can i get my t-mobile sim to work? Any help appreciated as i am new to android phones!
Thanks
Click to expand...
Click to collapse
If you want T-Mobile to work best follow the switching carrier guide to change CSC code to TMB and then flash the Latest T-Mobile Firmware...
https://forum.xda-developers.com/showpost.php?p=74087340&postcount=1
unitop4 said:
Can I use a gsm sim card and a verizon sim card at the same time on verizon branded phone? I see you have to flash the firmware above but am wondering if this would help me.
Click to expand...
Click to collapse
No way to dual SIM US models without trying to modify the SIM tray...and some have damaged trying to...
BlueFox721 said:
If you want T-Mobile to work best follow the switching carrier guide to change CSC code to TMB and then flash the Latest T-Mobile Firmware...
https://forum.xda-developers.com/showpost.php?p=74087340&postcount=1
No way to dual SIM US models without trying to modify the SIM tray...and some have damaged trying to...
Click to expand...
Click to collapse
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Mr. Orange 645 said:
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Click to expand...
Click to collapse
Another user had SIM issues and flashed back to factory (theirs was unlocked) then changed carriers and SIM worked again...sometimes a clean flash can work...
Hi all. For me I flash all firmware at clean wipe, never any issues. I have an unlock AT&T Note 8 unlock running the latest Verizon firmware with VZW SIM active. I also have a t-mobile S8+ unlock and running the latest U1 firmware and working with Verizon SIM active. I constantly switch my firmware between tmobile, verizon and at&t to see performance and what ever else feature added.
kdecoteau1 said:
Hi all. For me I flash all firmware at clean wipe, never any issues. I have an unlock AT&T Note 8 unlock running the latest Verizon firmware with VZW SIM active. I also have a t-mobile S8+ unlock and running the latest U1 firmware and working with Verizon SIM active. I constantly switch my firmware between tmobile, verizon and at&t to see performance and what ever else feature added.
Click to expand...
Click to collapse
How did you get ATT N8 to work on VZW? I flashed my Tmo to VZW and i could never get speeds above 1mpbs. Even with unlocked firmware it did not get anywhere with VZW. I heard that its because the IMEI is not in VZWs database.
Hi there. My AT&T Note 8 works great on Verizon network, it's running the latest N950U1 Firmware 2BQL2, everything works great. It will work good on T-Mobile too, lately tmobile network giving trouble, sometimes less than 1 mbps on download. Since June 2017 I been having trouble with tmobile network in my area and around, so I switch to Verizon, couldn't bother the crappie service. My location I get 215 mbps on my note 8, IPhone 8 plus 147mbps download. I prefer Tmobile but it's not working good in area anymore.
[/COLOR]
Mr. Orange 645 said:
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Click to expand...
Click to collapse
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will doing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Pastor X said:
[/COLOR]
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will performing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Click to expand...
Click to collapse
Nevermind, I fixed it. I had to perform the carrier switch and flash Tmo's firmware. Running perfectly!
Pastor X said:
[/COLOR]
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will doing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Click to expand...
Click to collapse
Omg exacly whats happening to me? So what steps have you guys followed? Should I switch to T-mobile, or to factory unlocked?
I have Verizon phone, unlocked, and I use T-mobile sim card.
I would appreciate the help
Sent from my SM-N950U using Tapatalk
Verizion note8 with tmobile sim card
This is what happened when I changed carriers from the original verizon note8, on verizon network, with verizon sim and the most recent verizon pie update, to a carriers sim, that is tmobile service. And what happens, I didn't even think was possible... I put the new carriers sim in, truconnect, booted and let the phone register the new sim and network. Checked for update.... the was one, let the phone download and update. And you know how Verizon's boot logo is... it wasn't anymore. Booted the tmobile boot logo and sounds, strange. I'm not super noob and the little bit of knowledge and experience that I do have with roms and updates across carriers usually require physically flashing the rom. Correct me if I'm mistaking. Continuing.... optimizing apps....., huh?! The update flashed the tmobile software, without effecting any personally installed apps. Though the update did remove all the verzion software/bloatware, without permissions, and installed tmobile apps. 2 that are meant for user usage. They are tmobiles device unlock and the tmobile app. Which I might add, do not function, I surmise, because in not on the actual main tmobile network, but a scabbed on. I have never seen or experienced anything of the short. Please tell me if this is normal.? I was a bit upset. I did not give any carrier the permission to delete or install any app on my phone. But maybe things have changed since I dabbled. And If they have, maybe this might help the people that have been using Odin to get tmobile version rom while originally being a verzion phone. I dont think it's normal. Please tell me if this has happened to you.
Is there any way to get wifi calling on att with an unlocked s9 from best buy? Flashing att firmware or would it be best to get the att model? Must have wifi calling for work reasons and I hate all the bloatware but might not have a choice.
at&t probably blocks it, if you don't get their version. I have an unlocked, but on T-Mobile, and it works.
I flashed the AT&T firmware on my unlocked S9 and wifi calling and video calling worked.
With the stock firmware on the unlocked S9 nether option was there
Can you point me in the direction of a download for the stock firmware for AT&T? I'm wanting to do the same as well, but feeling pretty clueless about where to obtain it. thanks!
Same here. It works for me on T-Mobile
If I flash the att firmware will I still get firmware updates?
f10a said:
Flashing att firmware or would it be best to get the att model?
Click to expand...
Click to collapse
if you flash the att firmware or buy it straight from att you will end up a device supporting the same capabilities. So it's down to your tech skills or budget.
Where can I find the latest att firmware? I did not see it on sammobile.
How to
Step 1 Go to this thread for Firmware (thanks @iBowToAndroid)
You will want to go to the link for the U firmware and find the folder with the AT&T userdata file (RB7) download the user data file and the full firmware.
Step 2 Go to this thread to get the modified version of Odin that recognizes the GS9 firmware files. (Thanks @mweinbach and Raymondf )
You will then flash the downloaded files from Step 1 in Odin, after flashing the firmware the phone will boot into recovery and you will need to wipe data and cache.
Thanks so much... that did actually help me... as a fairly tech savvy person who doesn't really get into this stuff much, the lingo I didn't know was leading me astray... I had come across that thread but didn't recognize it as anything that would help me. Thanks again! Onward to bricking my phone!
StolenVW said:
I flashed the AT&T firmware on my unlocked S9 and wifi calling and video calling worked.
With the stock firmware on the unlocked S9 nether option was there
Click to expand...
Click to collapse
Thanks for the info. A follow-up question: is it possible to flash it back to the stock unlocked firmware? The reason is that I'll need to use foreign SIM card when I travel overseas.
handydandy said:
Thanks for the info. A follow-up question: is it possible to flash it back to the stock unlocked firmware? The reason is that I'll need to use foreign SIM card when I travel overseas.
Click to expand...
Click to collapse
I have unlocked version on TMobile and wifi calling works just fine.
Do you have to flash the att firmware to the unlocked version in order to get VoLTE? I don’t care about WiFi calling, just hd calling and being able to stay on lte when making a call, rather than have it drop to HSPA during the call.
StolenVW said:
I flashed the AT&T firmware on my unlocked S9 and wifi calling and video calling worked.
With the stock firmware on the unlocked S9 nether option was there
Click to expand...
Click to collapse
Probably wont last. Unless att has an imei number from an wifi calling att phone on that account it will eventually go away.
Thor2j said:
Probably wont last. Unless att has an imei number from an wifi calling att phone on that account it will eventually go away.
Click to expand...
Click to collapse
I have unlocked S9 - I have wifi calling on tmobile and att. It's in the phone app settings. Not the device settings.
Wifi Calling
Here's a screenshot
sd_N said:
I have unlocked S9 - I have wifi calling on tmobile and att. It's in the phone app settings. Not the device settings.
Click to expand...
Click to collapse
I understand, but unless att has changed its policies in the last month, if u do not have an imei number on that account that is an att phone with wifi calling it will turn itself off as soon as your phone is interrogated by the network. Theres 100 threads on it , applies to unlocked s8, s7, etc...
Toggle is there because of firmware, not because it works.
Thor2j said:
I understand, but unless att has changed its policies in the last month, if u do not have an imei number on that account that is an att phone with wifi calling it will turn itself off as soon as your phone is interrogated by the network. Theres 100 threads on it , applies to unlocked s8, s7, etc...
Toggle is there because of firmware, not because it works.
Click to expand...
Click to collapse
That's the way it's supposed to work.
Any help/guidance for me??
I have tried a few times to use the March 2018 RB7 files with the ATT user data to get my phone to ATT stock - primarily for the Enhanced LTE (data and voice at the same time), as well as Wifi Calling. I can't get that version to load. I did get a more recent version to load (RK1) - and maybe that is the issue. Just wondering if there is a newer set of files and what specifically I should use (AP,BL... UserData) to get the phone fully set to AT&T. I now have the wifi calling option, just can't get it enabled. Any help is appreciated.
salevine said:
I have tried a few times to use the March 2018 RB7 files with the ATT user data to get my phone to ATT stock - primarily for the Enhanced LTE (data and voice at the same time), as well as Wifi Calling. I can't get that version to load. I did get a more recent version to load (RK1) - and maybe that is the issue. Just wondering if there is a newer set of files and what specifically I should use (AP,BL... UserData) to get the phone fully set to AT&T. I now have the wifi calling option, just can't get it enabled. Any help is appreciated.
Click to expand...
Click to collapse
When you try to enable it do any of the AT&T Wifi calling configuration screens pop up?
Samsung website have note 10+ $200 off and free buds. I want to purchase the unlocked model.
1. Is it simple as get the device then stick in tmobile sim? Or there is additional step to do.
2. I going to be travel to Asia within a month or so, i can use phone for sim from oversea correct?
3. Is unlocked model have wifi calling, volte?
I should get mine Tue or Wed, I'm on ATT, I plan on just trying my SIM card...I'll try to remember to report back later in the week..
Thank, I will wait for your answer. I heard from the other post that some feature won't work with tmobile? I don't plan to root or anything
OxyEthane said:
Samsung website have note 10+ $200 off and free buds. I want to purchase the unlocked model.
1. Is it simple as get the device then stick in tmobile sim? Or there is additional step to do.
2. I going to be travel to Asia within a month or so, i can use phone for sim from oversea correct?
3. Is unlocked model have wifi calling, volte?
Click to expand...
Click to collapse
1.) - Yes it is that simple and it does work. I had done it with the U1 firmware and had no issues. If you want to ensure full compatibility (and video calling) then you will wanna consider flashing the Tmobile carrier firmware. Flashing carrier firmware onto the phone will not have any impact on the network/sim unlock status (in case if your wondering).
2.) - You will have to ask the carrier your going to use in Asia if it will be supported. Since the unlocked model has no sim/carrier lock on it you can use it with any provider that supports the phone.
3.) - Yes and No, depending on the carrier. Tmobile has been the most compatible with BYOD devices so yes to most of that. AT&T on the other hand not so much so, as they only provision things like WiFi calling, VOLTE, etc. on phones they have sold. Some people have tried to find work arounds to this AT&T restriction, so YMMV.
In Tmobile's case if I remember correctly WiFi calling should work just fine and VOLTE will. You may need to setup the APN manually, or at least make sure it is set up properly. Another option (and one I did to get video calling to work) is flashing the the firmware from Tmobile for the SM-N975U to ensure full carrier compatibility.
What do you mean full compatibly video call, isnt video go with facebook messenger or depend on apps?
I don't have to root in order to flash, right?
Is there any current issues that I need to know?
Is it worth get 5g at all?
Is there any guide or video guide to flash tmobile carrier firmware to note 10 plus unlocked? Please answer asap so i can purchase phone soon
OxyEthane said:
What do you mean full compatibly video call, isnt video go with facebook messenger or depend on apps?
Click to expand...
Click to collapse
Hopefully this will clear up any misunderstanding..
My reply was referring to carrier features and nothing more.
When I says "full compatibility" I mean any specific customization or tweaks the carrier makes to the firmware they release for the network they run. These tweaks would not be fully (or mostly) present on the U1 firmware. For example U1 firmware may not get the best speed or signal strength as opposed to the carrier released U firmware.
When I say "video calling" I am talking about starting a video call from the dialer app (same one you use to dial a random number on the telephone). This would not be present on the U1 firmware.
OxyEthane said:
I don't have to root in order to flash, right?
Click to expand...
Click to collapse
No
OxyEthane said:
Is there any current issues that I need to know?
Click to expand...
Click to collapse
No.. but I would suggest that you do some google searches and read up on how to do this. This way you have an understanding on what you will need odin for and how to use it.
OxyEthane said:
Is it worth get 5g at all?
Click to expand...
Click to collapse
IMHO in the USA I wouldn't just yet.. Not unless you want the shiny shiny to show off to your friends. It's not widely available and once it is I would still wait for them to work out all the kinks before spending the extra money. The LTE speeds I get as it is are sufficient enough for what I do, but eventually I will end up getting 5G after it gets fully released and the carriers get it stabilized.
OxyEthane said:
Is there any guide or video guide to flash tmobile carrier firmware to note 10 plus unlocked? Please answer asap so i can purchase phone soon
Click to expand...
Click to collapse
Yes tutorials and videos are on the internet.
I would encourage you to put some effort into finding the answer. I will tell you that the steps to do this are the same for the S9+ and a person was just recently discussing flashing 975U firmware to the 975U1 firmware on this forum.
I wonder if this video good idea to follow
https://www.google.com/url?sa=t&sou...BMAJ6BAgHEAQ&usg=AOvVaw18C8vlQDueUAkGQjTDOMve
OxyEthane said:
I wonder if this video good idea to follow
https://www.google.com/url?sa=t&sou...BMAJ6BAgHEAQ&usg=AOvVaw18C8vlQDueUAkGQjTDOMve
Click to expand...
Click to collapse
It is pretty decent.. but here's a few more things you will want to do.
If you have a google account on the phone already be sure to factory data reset it to remove FRP lock.
If not already mentioned in the video use the CSC_*** file and not the home_csc file.
Flash the USERDATA file included with the tmobile firmware. You can easily see where to place the USERDATA file in tge odin flashing tool.
After you get done flashing the phone be sure to factory data reset it to ensure everything works (OTA, etc).
I bought my mom the A505U for Mother's Day and she is on T-Mobile.
She has it all set up and says calling and everything worked automatically but when she start up the phone it has the Verizon splash screen, so it looks like came with Verizon firmware. Is it recommended to put different firmware on their, like the "USA" firmware from Sammobile or is there really not much difference. I think she said she also had trouble with the voicemail, but she eventually got it setup but says it doesn't work the same as her old T-Mobile phone. Also, if I put a different firmware on their via Odin, will it wipe her phone?
Thanks in advance.
"if I put a different firmware on their via Odin, will it wipe her phone?" - yes
How often does she restart it? its not really a problem just branding, im sure you could get the t-mobile one and it would have the t-mobile boot screen instead, most a50s are the same inside - its really user preference
InFam0us-1985 said:
"if I put a different firmware on their via Odin, will it wipe her phone?" - yes
How often does she restart it? its not really a problem just branding, im sure you could get the t-mobile one and it would have the t-mobile boot screen instead, most a50s are the same inside - its really user preference
Click to expand...
Click to collapse
I didn't see a T-Mobile firmware on the site. I only saw Verizon, Sprint, Comcast, and USA. I'm guessing USA is the unlocked version. I don't think T-mobile carries the A50.
I think she restarts her phone very little, probably only when it dies. I guess it's not that big of deal. Just an annoyance i guess.
J3STUR said:
I didn't see a T-Mobile firmware on the site. I only saw Verizon, Sprint, Comcast, and USA. I'm guessing USA is the unlocked version. I don't think T-mobile carries the A50.
I think she restarts her phone very little, probably only when it dies. I guess it's not that big of deal. Just an annoyance i guess.
Click to expand...
Click to collapse
the phone has multi csc meaning it doesnt matter which firmware is used.. it should change with the sim card inserted.
you could try entering into dial pad *#272*IMEI# then selecting TMB.. this will most likely wipe the phone tho
elliwigy said:
the phone has multi csc meaning it doesnt matter which firmware is used.. it should change with the sim card inserted.
you could try entering into dial pad *#272*IMEI# then selecting TMB.. this will most likely wipe the phone tho
Click to expand...
Click to collapse
Yeah, I think she would rather deal with the splash screen then wiping her phone. She has it all setup and everything. Everything works fine, it's just the splash screen, and I think the voicemail works differently but she got it working though. I will ask her what specifically is different with the voicemail but I'm pretty sure she rarely turns it off anyways. I will talk to her about it and ask her if it's worth it to wipe the phone or not.
Thanks the reply!
elliwigy said:
the phone has multi csc meaning it doesnt matter which firmware is used.. it should change with the sim card inserted.
you could try entering into dial pad *#272*IMEI# then selecting TMB.. this will most likely wipe the phone tho
Click to expand...
Click to collapse
I get an error while doing this.
I guess I will just try to flash the "USA" firmware through Odin. I guess she is having a couple annoying problems:
Samsung Cloud is hidden and even shortcutmaker wont open it.
Voicemail/Visual voicemail problems
Splashscreen
Regular error notification that the sim is not a verizon sim.
and a couple other ones I can't remember.
I have a att note 10+ that I sim unlocked it will take a Verizon sim and work 100% but it will not work with straight talk i have no service can't call text and no data every once in awhile a text will get thru but can anyone help me with this I can't root because I can't oem unlock unless there is another way any help would be appreciated
ackaite said:
I have a att note 10+ that I sim unlocked it will take a Verizon sim and work 100% but it will not work with straight talk i have no service can't call text and no data every once in awhile a text will get thru but can anyone help me with this I can't root because I can't oem unlock unless there is another way any help would be appreciated
Click to expand...
Click to collapse
Did you set the APN information correctly?
Also are you using the N975U1 firmware or the standard AT&T firmware?
Are you using the BYOD sim card from straight talk?
What have you done over the phone with Straight Talk as far as troubleshooting? - this one can be important. If the phone isn't working with straight talk only it maybe a configuration (apn setting) or provisioning issue.
Are you sure the device is compatible with the area or region your in?
What provider/tower (Verizon, AT&T, etc.) does straight talk have you going through?
More information on what you have done to setup the phone for straight talk, troubleshooting steps you have taken, what information straight talk may have provided (etc. etc.) will help others be able to help you. Providing little or no details makes it rather hard to offer any help.
The apn won't let me put dun in the type I sim unlocked it with a puk code and got strighttalk byop I tried flashing the U1 firmware to it wouldn't take it so I did a Verizon firmware thinking that might help and same thing with the striaght talk it doesn't wanna work i put a Verizon sim in it and it works just like it did on ATT so I'm confused as to why the straight talk sim won't work they can't figure it out on their end either
I factory reset the phone reset network settings did just about everything I could with the phone besides it being funny about the apn cuz it says apn cannot be changed on this device if you put dun in the apn type i dunno the only thing I notice is when the Verizon sim card is in the phone the network mode is set to global whereas with the striaght talk its LTE/CDMA and it won't let you change it to global
ackaite said:
The apn won't let me put dun in the type I sim unlocked it with a puk code and got strighttalk byop I tried flashing the U1 firmware to it wouldn't take it so I did a Verizon firmware thinking that might help and same thing with the striaght talk it doesn't wanna work i put a Verizon sim in it and it works just like it did on ATT so I'm confused as to why the straight talk sim won't work they can't figure it out on their end either
Click to expand...
Click to collapse
Straight Talk uses different mobile providers to offer service different areas.. They utilize Verizon, AT&T, Sprint and T-Mobile (Sprint and T-Mobile have merged recently, but Sprint towers are still active).
I have seen posts across the internet that indicate you should be using the U1 firmware on the phone.. I would make sure your converting the phone to the U1 firmware properly.
If I recall correctly (this is how I did it previously) when flashing the U1 firmware make sure your doing it without the sim card installed and using the non home_csc file. Factory data reset the phone after you successfully flash the U1 firmware and then insert the sim card after setting the phone back up (so it can apply the new sim/network settings).
I would strongly suggest you do not restore a backup during initial setup when you do this. If you restore a backup it may restore previous network settings/configurations that were for what you had previously.
If flashing U1 firmware doesn't help (and since this this is a Straight Talk specific issue) then it's more then likely on the end of Straight Talk. I would call them and make sure that your sim card is the correct one for the cell towers they have you going through and the phone you have. Using an incompatible sim card (or one that is faulty) can cause issues like this. You can also have them send you another sim card to try.
Also contact them to make sure the service is properly provisioned and activated on your phone. Double check the APN with them, and see if they have an alternative one to try. It is also possible that a service outage maybe (or issue with Straight Talk internally) in your area, so I would call them to make sure that neither are not the case here.
ackaite said:
I factory reset the phone reset network settings did just about everything I could with the phone besides it being funny about the apn cuz it says apn cannot be changed on this device if you put dun in the apn type i dunno the only thing I notice is when the Verizon sim card is in the phone the network mode is set to global whereas with the striaght talk its LTE/CDMA and it won't let you change it to global
Click to expand...
Click to collapse
The Global setting doesn't really matter in this case and your phone will be set to use the towers that Straight Talk has you going through.
The only thing that I can think of that would be a problem with network mode is if your sim card from straight talk is meant for a different provider then the towers they use in your area (i.e. sim card is for AT&T but the provider they have for the area is Sprint).
the straight Talk sim works in other phones no problem a s8 and a older note im thinking att has something in the software to block other apns i dunno i unlocked it with a PUK code and flashed verizon firmware on it thinking i could get passed it but the verizon sim works 100% and the att sim works 100% too but a straighttalk sim card (verizon) towers the phone tries it shows 4g and disappears and then it shows it has service but cant call it just says emergency calls only
ackaite said:
the straight Talk sim works in other phones no problem a s8 and a older note
Click to expand...
Click to collapse
I would not use older phones as a means to say the sim card is good. Besides that's irrelevant to what is going on with the Note 10+
ackaite said:
im thinking att has something in the software to block other apns
Click to expand...
Click to collapse
Then this means one of two things... Either you didn't get the phone unlocked or else you did not convert to another carrier (or the U1 firmware XAA region) correctly.
If your using the unlocked firmware (U1 XAA region) then you should be able to edit the APN. If not then you should be able to create one.
ackaite said:
i dunno i unlocked it with a PUK code and flashed verizon firmware on it thinking i could get passed it but the verizon sim works 100% and the att sim works 100% too but a straighttalk sim card (verizon) towers the phone tries it shows 4g and disappears and then it shows it has service but cant call it just says emergency calls only
Click to expand...
Click to collapse
That sounds like either the sim card isn't good, the phone was not activated/provisioned properly in there systems (call them and double check IMEI and model information), the phone is not compatible with the service they offer in your area (I suggest using the XAA region U1 firmware in this case) or else your phone is not fully unlocked.
I would also suggest google searching or else asking them for any updated or alternative APN's to try. It maybe very likely the one you have is not suitable for the phone/area... It wouldn't be the first time I have had an issue similar to this like this.
I am opt to believe the first 3 are the most likely scenarios since the phone works on Verzion with the sim card per your indication.
Yeah and the only reason I tried the older phone is to see if the sim card is activate with the number and the phone itself pulled the apn from network when I tried to flash to U1 the phone gave me a error but it took the Verizon firmware for the 975U but its still not working do you know of a good link for the firmware your talking about so I can try that
ackaite said:
Yeah and the only reason I tried the older phone is to see if the sim card is activate with the number and the phone itself pulled the apn from network
Click to expand...
Click to collapse
From personal experience I would advise in the future you don't do that. When you activate the phone you should activate the one you are using and definitely do not use an older phone to activate a newer phone. I have had many problems with this in the past as provisioning for an older phone didn't always work for my newer ones..
ackaite said:
when I tried to flash to U1 the phone gave me a error but it took the Verizon firmware for the 975U but its still not working do you know of a good link for the firmware your talking about so I can try that
Click to expand...
Click to collapse
I waited for you to give more information on the issue, but you didn't. So I am sorry, but if you don't provide the details of what is going on it makes helping you very difficult. You didn't say what error you are getting, what the firmware version(s) are of what your trying to flash and what is currently on the phone.
Here's the last piece of help I can offer now.
I can tell you that the following can be found on the forum by searching:
Links and how to obtain the firmware - Multiple threads asking the same question exist here. Also Frija, SamFirm, SamMobile are just a few examples of what can be found referenced here.
Bootloader version(s) - what will happen when you try to downgrade and what will happen (along with a important thing) when you upgrade.
Websites to find firmware - SamMobile and some others have been mentioned.
Patched Odin - In case you need the latest version it has been mentioned here already.
I can also tell you that by using Google and searching for SM-975U1 XAA on Sammobile does in fact work.
Brother give me root file for note 10 plus SM-N975U android 10 version one Ul version 2.5 plz help me