Related
Hi All
having a problem here, windows 7 detect my phone, but in Hansoon 2000 and launch the cmd Getvar All, cmd unable to detect my phone
FYI my phone was already rooted and s-off, i totally forget how i did it
Reason to use Hansoon 2000 is because i had downloaded the official Lollipop update (1.44GB Asia) but have no means and ways to flash it even with twrp build in.
There is not supersu and does not seems root after i have **** up the OS.
Hope anyone here can guide me step by step, i getting confuse after looking for information on google and on XDA forums
Regards
Andy
cosmickiller said:
Hi All
having a problem here, windows 7 detect my phone, but in Hansoon 2000 and launch the cmd Getvar All, cmd unable to detect my phone
FYI my phone was already rooted and s-off, i totally forget how i did it
Reason to use Hansoon 2000 is because i had downloaded the official Lollipop update (1.44GB Asia) but have no means and ways to flash it even with twrp build in.
There is not supersu and does not seems root after i have **** up the OS.
Hope anyone here can guide me step by step, i getting confuse after looking for information on google and on XDA forums
Regards
Andy
Click to expand...
Click to collapse
i can help you over teamviewer just pm me.
cosmickiller said:
Hi All
having a problem here, windows 7 detect my phone, but in Hansoon 2000 and launch the cmd Getvar All, cmd unable to detect my phone
FYI my phone was already rooted and s-off, i totally forget how i did it
Reason to use Hansoon 2000 is because i had downloaded the official Lollipop update (1.44GB Asia) but have no means and ways to flash it even with twrp build in.
There is not supersu and does not seems root after i have **** up the OS.
Hope anyone here can guide me step by step, i getting confuse after looking for information on google and on XDA forums
Regards
Andy
Click to expand...
Click to collapse
You shouldn't use toolkits. Are you s-off?
Yes S-off
xunholyx said:
You shouldn't use toolkits.
Click to expand...
Click to collapse
Agreed. Why use a toolkit for what is accomplished with a single adb command? Toolkit just adds unnecessary complexity, and another point of potential failure.
Is the phone in recovery or booted into OS? getvar is an adb command, and adb only works under those conditions. Also, adb needs to be activated in the phone's settings.
This guide was inspired by:
http://reviewroots.com/root-Huawei-MediaPad-M2-with-or-without-pc
http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html
http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Big THANKS
Note: I am not responsible for any damage made by doing this.
I have tried some root practices on my Huawei Mediapad M2 8.0, but this is the only that worked for me. This practice is without PC, using Kingroot. It worked for me for first try.
If you are new and don't know what is root, you probably don't need it. But for education, check THIS
What will this do?
Root your device
Install Kingoot app (should be uninstalled by itself, or you can manually uninstall it)
Install SuperSU app
GUIDE
Allow unknown sources in Settings/Security
Download and install View attachment NewKingrootV4.80.apk
Click 'Start root' button when it appears
After a few minutes, it should be completed.
Now you are ROOTED. But for now, KingRoot is the root managing app. If you are OK with this, then you are done. If you want SuperSU continue:
Install Terminal Emulator
Download View attachment Replace_Kinguser_with_SuperSU-v2.4.zip and unzip the mrw folder to your internal SD
Open Terminal Emulator and type:
Code:
su
Now it should ask for root permissions, click allow (Don't type this line)
sh /sdcard/mrw/root.sh
Don't worry if it display an error, just let it continue
Now, the Kingroot should disappear and SuperSU should appear. In my case, SuperSU didn't appear because the installation crashed. So if can you see SuperSU app, jump to 9th step.
If you don't see SuperSU app, check it in Google Play if it's installed. If it's not, just install it.
When you first open SuperSU is should ask you for updating binary, click install normally and then reboot you phone.
Now everything is done, I just wanted to have 10 steps, so I give you my advice: It's better to support SuperSU developer, but if you don't want, you can get pro functions free and legally :
Open SuperSU app
Go to settings tab
Find and check Enable Pro setting
Restart the app and now you are PseudoPro
Thanks for you attention!
If you found this helpful, please click the Thanks! button.
Please check the posts I was inspired by
If you think something is wrong, feel free to tell it
PS: Sorry for my bad English
Supersu update failed..plz reboot
dopi2010 said:
Supersu update failed..plz reboot
Click to expand...
Click to collapse
I am sorry to hear that. Please make sure you followed steps 6 and 7 with success.
The Tablet must have the bootloader 'unlocked', first of all. I used dc-unlocker2client.exe, to get the code; I paid £4 for the privilage of receiving the unlock code.
I then used ADB to to unlock the tablet.
I then flashed TRWP via ADB
I then flashed the beta-SuperUser via TRWP
Forget the Kingo and One Click rooting methods, they didn't work for me.
See March 25th thread for a complete explanation.
To me it worked like a charm with B005, with the latest B006 it doesn't anymore..
thanks you so much its just worked like a charm on my m2 8
inkyadrian said:
The Tablet must have the bootloader 'unlocked', first of all. I used dc-unlocker2client.exe, to get the code; I paid £4 for the privilage of receiving the unlock code.
I then used ADB to to unlock the tablet.
I then flashed TRWP via ADB
I then flashed the beta-SuperUser via TRWP
Forget the Kingo and One Click rooting methods, they didn't work for me.
See March 25th thread for a complete explanation.
Click to expand...
Click to collapse
Hi......... I have Huawei mediapad 2 10.0 64gb and I got the unlock code of bootloader from the website of huawei but i dont know how to unlock bootloader and root the device .......plz help !!
Ahmadfreihat17 said:
Hi......... I have Huawei mediapad 2 10.0 64gb and I got the unlock code of bootloader from the website of huawei but i dont know how to unlock bootloader and root the device .......plz help !!
Click to expand...
Click to collapse
it's all in here: http://forum.xda-developers.com/mediapad-m2/how-to/guide-unlock-bootlader-twrp-root-huawei-t3322340
It doesn t works
yeah same here, installed kingroot apk, and it tells me no root strategy available and then puts me into a research request?
it does not work
Let me dry 32% in the rooting and says: 1423 ppls, research requests is not enough, please wait.
Same for me.. not working & not enough research requests in the Kingroot .apk
Thanks so much, it worked
ubermenchp said:
Thanks so much, it worked
Click to expand...
Click to collapse
How Did It Worked?
Hi everyone. I am new and I agree that I am complete noob in this field. I have never did any update to my stock vibe p1 ROM because it runs very smoothly and I never encountered a single issue like other users had. Now I want to just Root it but I don't want any upgrades( in terms of version update). I know that this question may have been answered earlier but all the listed method is so confusing. Can anyone please just put the step by step instruction on how to root my vibe p1 and please share the link of the necessary files in this thread. I am sorry for wasting your time but I need to root it to gain access to my network settings. Thanks in advance. :angel:
VIPNEXXT said:
Hi everyone. I am new and I agree that I am complete noob in this field. I have never did any update to my stock vibe p1 ROM because it runs very smoothly and I never encountered a single issue like other users had. Now I want to just Root it but I don't want any upgrades( in terms of version update). I know that this question may have been answered earlier but all the listed method is so confusing. Can anyone please just put the step by step instruction on how to root my vibe p1 and please share the link of the necessary files in this thread. I am sorry for wasting your time but I need to root it to gain access to my network settings. Thanks in advance. :angel:
Click to expand...
Click to collapse
Try Kingo Root.
All you need is an laptop or pc, or you could try Kingo Root apk file.
Look on uncle Google for this app.
Good luck.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
stympy said:
Try Kingo Root.
All you need is an laptop or pc, or you could try Kingo Root apk file.
Look on uncle Google for this app.
Good luck.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Click to expand...
Click to collapse
Genie root, kingoroot , vroot and many other I tried and all of them failed. Thanks for reply grandma.
VIPNEXXT said:
Genie root, kingoroot , vroot and many other I tried and all of them failed. Thanks for reply grandma.
Click to expand...
Click to collapse
You could tell this important information in your o.p. so we can skip this step.
Now... write here what your system is, like what is written in: Settings/About phone/Device information/Build number.
What you have to do is to read some articles from here: http://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
I think, if you dont know what to do, go to someone who knows and can help you.
Good Luck.
stympy said:
Try Kingo Root.
All you need is an laptop or pc, or you could try Kingo Root apk file.
Look on uncle Google for this app.
Good luck.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Click to expand...
Click to collapse
stympy said:
You could tell this important information in your o.p. so we can skip this step.
Now... write here what your system is, like what is written in: Settings/About phone/Device information/Build number.
What you have to do is to read some articles from here: http://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
I think, if you dont know what to do, go to someone who knows and can help you.
Good Luck.
Click to expand...
Click to collapse
Thanks for reply. That is the exact thing I meant when i called myself noob. My build is p1a_42_s137_151028_ROW. I did mentioned I got confused though I know this is not a new topic. I think the process (in the link) is for upgrades and what I want is just root because I never got a 100% satisfied user after any upgrades let it be via ota(starting with 30mb patch) or custom Row. My handset works perfectly fine. No lag no heating , no battery draining, etc. I want to root because I want to tweak network settings which is not possible with non rooted mode as SQL is not accessable. Sorry i was not able to provide whole info but I truly don't use blogs or social sites so I lack the idea.
VIPNEXXT said:
Thanks for reply. That is the exact thing I meant when i called myself noob. My build is p1a_42_s137_151028_ROW. I did mentioned I got confused though I know this is not a new topic. I think the process (in the link) is for upgrades and what I want is just root because I never got a 100% satisfied user after any upgrades let it be via ota(starting with 30mb patch) or custom Row. My handset works perfectly fine. No lag no heating , no battery draining, etc. I want to root because I want to tweak network settings which is not possible with non rooted mode as SQL is not accessable. Sorry i was not able to provide whole info but I truly don't use blogs or social sites so I lack the idea.
Click to expand...
Click to collapse
Tell me one thing!
When you tried to root your phone with kingo root tool, did you activated USB Debugging option from developer section ?
If not, activate this option from developer option and try again.
To activate this option you must go to : Settings/About phone/Device information/Build number and press fast many times on it till developer tab is activated.
Go to Settings/Developer options and activate the option from there.
Write here what is going on.
stympy said:
Tell me one thing!
When you tried to root your phone with kingo root tool, did you activated USB Debugging option from developer section ?
If not, activate this option from developer option and try again.
To activate this option you must go to : Settings/About phone/Device information/Build number and press fast many times on it till developer tab is activated.
Go to Settings/Developer options and activate the option from there.
Write here what is going on.
Click to expand...
Click to collapse
Yes sir I did that via USB connect option. Did anyone had success with kingoroot? But they did not mention vibe p1 in their support list. Thanks for quick reply.
VIPNEXXT said:
Yes sir I did that via USB connect option. Did anyone had success with kingoroot? But they did not mention vibe p1 in their support list. Thanks for quick reply.
Click to expand...
Click to collapse
you are right the root for this device is not avialable by kingoroot.they r actually working on it , may be in future we will get it.
There is a bootloader lock on the phone. Applications is useless. The bootloader must first be unlocked, or root application must be installed on the rom. The best solution for you is to unlock the bootloader lock and install twrp. Please see the following page:
https://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
Fatih Firinci said:
There is a bootloader lock on the phone. Applications is useless. The bootloader must first be unlocked, or root application must be installed on the rom. The best solution for you is to unlock the bootloader lock and install twrp. Please see the following page:
https://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
Click to expand...
Click to collapse
That entire process is for unlocking the bootloader? Let's say I have done that but how can I get rooted without updating my raw row?
VIPNEXXT said:
That entire process is for unlocking the bootloader? Let's say I have done that but how can I get rooted without updating my raw row?
Click to expand...
Click to collapse
Well I can only say that with my rom 288 the process was If you have already unlocked bootloader is using QFIL and selecting rawprogram_twrp.xml put supersu zip on your sd card boot into twrp recovery and install supersu zip.
VIPNEXXT said:
That entire process is for unlocking the bootloader? Let's say I have done that but how can I get rooted without updating my raw row?
Click to expand...
Click to collapse
It probably works with the qfil file of your same rom. You need to add and flash bootloader files into the same rom(data can be deleted). ROM version is not important for the bootloader file. If the process is successful, you can install twrp and supersu.zip
S137 qfil rom:
https://drive.google.com/file/d/0B0xPm0R2ARggMHBTb3F5ZG1BRUE/view
Hi all,
I got a new ZenFone2 Z00A yesterday and installed TWRP, LineageOS 14 and root for that device. Everything worked well so far, but i cannot use root for apps. Each app claims that this device is not rooted. The Bootloader is unlocked and root access is allowed for apps and adb. Strangely enough I can su when I connect via adb, only apps cannot.
I Googled for hours, flashed the OS new but with no avail.
Has anyone a solution for this?
tosho1 said:
Hi all,
I got a new ZenFone2 Z00A yesterday and installed TWRP, LineageOS 14 and root for that device. Everything worked well so far, but i cannot use root for apps. Each app claims that this device is not rooted. The Bootloader is unlocked and root access is allowed for apps and adb. Strangely enough I can su when I connect via adb, only apps cannot.
I Googled for hours, flashed the OS new but with no avail.
Has anyone a solution for this?
Click to expand...
Click to collapse
The answer is right in LinOS thread https://forum.xda-developers.com/showthread.php?p=73934073
Sent from my ASUS_Z00AD using Tapatalk
kenbo111 said:
The answer is right in LinOS thread https://forum.xda-developers.com/showthread.php?p=73934073
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
Whow! such a tiny notice
Thanks a lot. It's working
I wonder, though, why it is not fixed in the official sources after a month. I always have ambivalent feelings installing such basic code from "I don't know, whom"
hi,
A70 is now widely sold, i try to buy one soonest but just waiting for root and twrp. it is still empty here on xda...
i found a link show how to root and install
https://myphoneupdate.com/samsung-galaxy-a70-twrp-recovery/
can i ask if some one already tried as above? looks like a copy method for all kind of phones ...
tks.
Most likely fake, the article was published a month ago. A70 only got released on 26th March.
I would definitely wait until someone posts a technique here; I tend to trust the experts here, but not so much everywhere else on the internet. I would prefer to wait a few weeks and put with an unrooted device, rather than possibly end up with a bricked (or hijacked) device.
Andre
ok i will wait...
it was like this, waited for s10+, came twrp but didnot like camera hole and waiting for A70, then waiting for twrp, then oneplus7pro release, then wait a bit for its twrp, till then note 10 pro comes soon, then wait for twrp of it....
and after 2+ year still using note8 LOL
amk said:
hi,
A70 is now widely sold, i try to buy one soonest but just waiting for root and twrp. it is still empty here on xda...
i found a link show how to root and install
https://myphoneupdate.com/samsung-galaxy-a70-twrp-recovery/
can i ask if some one already tried as above? looks like a copy method for all kind of phones ...
tks.
Click to expand...
Click to collapse
First thing I tried ofcourse, rooting the A70, but... follow the steps in the manual yourself, and you'll see that you get stuck on step 3:
3.) After That Download TWRP Recovery https://twrp.me File On Your PC And Renamed The Downloaded Recovery File Name To twrp.img.
But there is no TWRP Recovery available for the A70
I also tried the A50 manual, but that also fails (stuck on OEM lock). I can install CROM Service, but it crashes.
Captain Beretta said:
First thing I tried ofcourse, rooting the A70, but... follow the steps in the manual yourself, and you'll see that you get stuck on step 3:
3.) After That Download TWRP Recovery https://twrp.me File On Your PC And Renamed The Downloaded Recovery File Name To twrp.img.
But there is no TWRP Recovery available for the A70
I also tried the A50 manual, but that also fails (stuck on OEM lock). I can install CROM Service, but it crashes.
Click to expand...
Click to collapse
don't follow some clickbait website's...
wait for a proper and trusted dev to release twrp. the phones has barely hit the market it will take a few weeks (if not months) at least till someone builds an twrp. one think you could provide us with would be some information. is the bootloader unlockable?
In devsettings is a possible to unlock oem. Try this before flashing twrp. If twrp flashed ok, I think need to wipe all data, include internal storage, then flash DM-VERITY, FORCE ENCRYPTION, AND DISC QUOTA DISABLER
zackptg5.com/android.php
I don't try it by myself. But you can try it, if you just buy the phone, and have not important data on it
What about this guide is it worth trying or not really possible? https://topjohnwu.github.io/Magisk/install.html
Avicohen21 said:
What about this guide is it worth trying or not really possible? https://topjohnwu.github.io/Magisk/install.html
Click to expand...
Click to collapse
Need to try
hello everyone I find a good deal on galaxy a70 is anyone succeed in rooting?
celoxocis said:
... is the bootloader unlockable?
Click to expand...
Click to collapse
i have opened 2 sealed box of A70 and there was no OEM unlock option in developer mode. then got another with tick to choose. baterry is so good but look like i have touch panel issue. waiting for update and then root, twrp...
amk said:
i have opened 2 sealed box of A70 and there was no OEM unlock option in developer mode.
Click to expand...
Click to collapse
Mine (bought direct from Samsung UK) has the OEM Unlock option in the Developer Options menu. Not tried it yet, not really much point until there is a reliable and tested root out there.
Andre
Hey guys manegd to root with this guide https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
Seems to work good I'll notify if I'll notice any bugs. If you have twrp porting guide send me and I'll try to Port. If you want I can open a new thread with more details and upload the AP file I used. BTW I have the Israeli version SM-705FN
Avicohen21 said:
Hey guys manegd to root with this guide https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
Seems to work good I'll notify if I'll notice any bugs. If you have twrp porting guide send me and I'll try to Port. If you want I can open a new thread with more details and upload the AP file I used. BTW I have the Israeli version SM-705FN
Click to expand...
Click to collapse
make a topic please
sanakess said:
make a topic please
Click to expand...
Click to collapse
Ok when I get home I'll open a thread with detailed explanation of what I did
Samsung account
Hello. My dumbass bought used A70 with samsung account. I can't make a factory reset, because it needs password from old owner account which i don't know. But I have my Google account on that phone and Google find my device enabled. Will I need to enter samsung account information when I make a reset via Google find my device? So when reset is made, phone will be locked only by FRP? And then when I login in my old Google account can i create a new Samsung account or do I need to login in existing that was on that phone first? Sorry for offtopic.
Any news about TWRP? SuperSu or Magisk?
Hello All, still can't find TWRP for sm-a705fn
Can I flash TWRP for another Exynos phone, like Galaxy 9, to my A70 ?
Also, can I still use SuperSu with Pie/A70 ? I failed to root my previous Galaxy Tab8 with custom Pie using SuperSU, had to root with Magisk instead,
it worked just fine, but the link to topjohnwu mentioned in previous posts, tells scary things about Samsung/Pie/Magisk -
like, I have to switch between two recoveries... Is that really the case?
I haven't noticed any issue with Tab8/Pie/Magisk, but SuperSu would be still more familiar to me.
used2brick said:
Hello All, still can't find TWRP for sm-a705fn
Can I flash TWRP for another Exynos phone, like Galaxy 9, to my A70 ?
Also, can I still use SuperSu with Pie/A70 ? I failed to root my previous Galaxy Tab8 with custom Pie using SuperSU, had to root with Magisk instead,
it worked just fine, but the link to topjohnwu mentioned in previous posts, tells scary things about Samsung/Pie/Magisk -
like, I have to switch between two recoveries... Is that really the case?
I haven't noticed any issue with Tab8/Pie/Magisk, but SuperSu would be still more familiar to me.
Click to expand...
Click to collapse
No, you can't use twrp for a different device, and don't use SuperSU neither. It was sold by chainfire to a Chinese company years ago and have been basically abandoned since 2017. I'm pretty sure Magisk is the better choice on any device running android 5 - 9.
Sent from my motorola one vision
Hello,
The problem with the post you mentioned is that there is no valid twrp attached. And I noticed that only Odin detects the fastboot mode of this device. If you enable USB debugging let's say, the command "adb devices" will detect the device and list it; whereas, if you reboot it to bootloader mode(fastboot), the command fastboot devices doesn't detect the phone. So in fastboot mode, only Odin will detect the device. Meaning, that the post of fake and not tested.
Regards,
Wael
amk said:
i have opened 2 sealed box of A70 and there was no OEM unlock option in developer mode. then got another with tick to choose. baterry is so good but look like i have touch panel issue. waiting for update and then root, twrp...
Click to expand...
Click to collapse
That's weird. I do have the Bootloader unlock option in the developer settings and can do/undo it just fine. Looks like Samsung is using different Firmware versions on the A70?