Develop Bugs

Install CWM 5

Hi, can I install last clockworkmod recovery 5.0.1.0 from another recovery (4Ext) choosing install from zip file?
I tried android flasher but I had error problem. [PVT4, CM7-r2 hboot]

U can install from an other recovery, but it will a fake flash..its like a temp recovery, after reboot u lost it..its not a permanent one
to change permanently the recovery, u need s-off, then do this steps
-install htc sync drivers (install htc sync, uninstall it but leave drivers)
-download this file and extract on ur computer (its a minimal set of files to use fastboot commands)
-put the recovery img file in the same folder u extract the above files
-in the shell, navigate to ur above folder..like cd C:\folder-name
-put ur phone in fastboot mode, plug the usb
-from ur computer start/run/cmd, then write fastboot flash recovery recovery-name.img
-fastboot reboot
that's all
(u will find all this by searching )

[Q] Stuck HTC One X with an empty internal sdcard?

Hi all,
Today after having weak wifi issue on my stock rom, decided to flash Maximus 21.0 rom 4.2.2.
Flashed kernel and then installed rom succesfully (it booted only once)
Then I updated rom with 21.1 ota.zip with wifi fix.
After this update my phone is stuck on "htc brilliant quality" boot screen.
Accidentally I had formatted the SDCARD as well
(so I don't have any rom.zip file inside sdcard)
I can enter into TWRP recovery, I can see fastboot screen, I can flash boot.img from cmd.
What do you suggest to do?
I would like to flash 4.2.2 stock rom or arhd 31.2 into the device if I succeed to copy rom into sdcard.
HBOOT version : 1.72
HTC One X Tegra 3
CID HTC__203
Thanks for your help.

Hello, I had almost the same problem as you do. What I did was ,downloading the rom you want to install to your PC (put it into "C:/" directory (easier)),then get into recovery -connecting phone via USB - type adb devices in cmd to check if your pc recognizes your phone if it does type "adb push c:/"ROM NAME.zip /sdcard/ when completed type adb shell in CMD after that - "ls /sdcard/" check if you see your rom if you see it choose install from sdcard or something like that and install .If you do not see the file google "adb push" commands .Hope I helped ,sorry if something doesn't make sense I'm tired. I'll check this post frequently to see if I can help anymore.
EDIT:IF you want to install stock rom ,download it ,push it and recover. You should have in mind that if you get error installing system you should flash the proper recovery

Flash this recovery .
http://db.tt/7Pcsg6sj
Then go into mounts & storage and mount as usb storage !
Leave it for a minute or so and the sdcard pop ups at windows. Copy a rom .....
sent from my venomized piece of technology

Thanks for the reply i've done it by using twrp & cwm recovery and selecting 'mount usb storage' this time it gave mounting sdcard error with twrp but rom flashing succeeded with cwm.
HTC One X cihazımdan Tapatalk 4 ile gönderildi

Adb not configuring on yu yureka!

Hey friends can someone please help me with configuring adb in yu yureka!!
I actually want to flash TESLA OS on my yureka..
so i followed the steps and unlocked my bootloader using adb and fastboot..
now after i unlocked my bootloader i wanted to flash cwm recovery.
so i booted my phone in fastboot and tried flashing cwm recovery now its showing " WAITING FOR DEVICE"!!
and when i boot my yureka in system it gets detected in adb mode!!!
i am only able to unlock my bootloader but cannot flash recovery...
I am using the following tools:-
1. adb setup 1.4.2
2. pda net +
3. universal adb drivers
4. yu yureka tool box
5. minimal adb and fastboot.
i tried everything but nothing worked!!!
PLEASEEEE HELP!!!!!!!!

if you unlocked your ""bootloader"" then u can root your phone.
for that you need to download ""supersu.zip"" then keep it on your external or internal storage then boot your device into recovery and apply update from sdcard or internal storage where you kept the supersu.zip file.
Now you have rooted your phone.
Download flashfy or rasher application from google play store.
Then flash twrp.img recovery or cwm.img recovery then open flashify and flash recovery through that app....
ITS DONE...!!!!!

Letv 1 pro US install Twrp !

hey
i need any one help me to install Twrp in Letv 1 pro US version ... Thanks

This is how I did it.
susbiction said:
hey
i need any one help me to install Twrp in Letv 1 pro US version ... Thanks
Click to expand...
Click to collapse
Files required to Root and Install Custom Recovery on Letv Le 1 Pro –
1. Download ADB and fastboot driver for windows or ADB and Fastboot for Mac and install it on your PC. This will also install your device driver.
2. Download TWRP 3.0 Recovery for Letv Le 1 Pro.
3. Download SuperSu to root Letv Le 1 Pro and copy it to your phone sd card.
------------------------------
Steps to Root and Install TWRP Recovery on Letv Le 1 Pro –
1) First, enable ‘USB debugging’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
2) Download TWRP 3.0.0 for Letv Le 1 Pro from above and place it in the folder where ADB installed and rename it to ‘recovery.img’. Now you can Root and Install TWRP Recovery on Letv Le 1 Pro via fastboot method.
3) Now go to installation directory open ADB folder and open the command window thereby pressing and hold the ‘shift’ key and right-clicked anywhere in that folder.
-------------------------------------
type adb command:
adb reboot bootloader (phone will reboot)
fastboot devices ( to check that device connection)
fastboot flash recovery recovery.img (flash twrp)
fastboot reboot (right away - continuously press "volumn up button" until boot to twrp recovery. or you it won't work)
--------------------------------------------
- After reboot into twrp, install supersu.zip to root your phone.
Good luck

ThaiDude said:
Files required to Root and Install Custom Recovery on Letv Le 1 Pro –
1. Download ADB and fastboot driver for windows or ADB and Fastboot for Mac and install it on your PC. This will also install your device driver.
2. Download TWRP 3.0 Recovery for Letv Le 1 Pro.
3. Download SuperSu to root Letv Le 1 Pro and copy it to your phone sd card.
------------------------------
Steps to Root and Install TWRP Recovery on Letv Le 1 Pro –
1) First, enable ‘USB debugging’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
2) Download TWRP 3.0.0 for Letv Le 1 Pro from above and place it in the folder where ADB installed and rename it to ‘recovery.img’. Now you can Root and Install TWRP Recovery on Letv Le 1 Pro via fastboot method.
3) Now go to installation directory open ADB folder and open the command window thereby pressing and hold the ‘shift’ key and right-clicked anywhere in that folder.
-------------------------------------
type adb command:
adb reboot bootloader (phone will reboot)
fastboot devices ( to check that device connection)
fastboot flash recovery recovery.img (flash twrp)
fastboot reboot (right away - continuously press "volumn up button" until boot to twrp recovery. or you it won't work)
--------------------------------------------
- After reboot into twrp, install supersu.zip to root your phone.
Good luck
Click to expand...
Click to collapse
i updated to 5.8. now i cant enter fast boot. actually i can but few seconds later automatically exit from fastboot. i guess its locked after 5.8. how can i flash twrp now?
THank you

fuat.meydan said:
i updated to 5.8. now i cant enter fast boot. actually i can but few seconds later automatically exit from fastboot. i guess its locked after 5.8. how can i flash twrp now?
THank you
Click to expand...
Click to collapse
Try this guide by DerTech99
What i do need?
1.Usb Cable
2.The Zip File
Guide:
1.Download the zip and extract it!
2.Install the minimal fastboot and adb when you dont have it! (is included)
3.Copy the Stockrecovery.img to where you have fastboot installed!
4.Turn your phone off but be fast!
5.Press "Power + Volume down" for 5 Sec until the pinguin shows up!
6.And connect fast the usb cable to the phone good!
7.Then give followed commands in "Fastboot devices"
8.When your phone do show up yes? then your ready to rock
9.Type followed command in "Fastboot flash recovery Stockrecovery.img"
10.When its done type "Fastboot reboot"
11.Disconnect your usb cable and youre are done!
12.Enjoy!
P.S After that you can flash TWRP i put in the zip the latest file!

Deadlock to my HTC 616

Hello everyone, I have an HTC desire 616 with a custom bootloader thanks to SPflash tool (done months ago) and now I need to perform a factory reset. Unfortunately I have:
- factory resets return, I have a "mount error"
- adb is only available in sideload mode and I cannot install anything since the security check of OTA package with my device fails.
- fastboot does not help since the bootloader is locked and I don t know how to reboot the device in download mode: "fastboot reboot emergency" says something about EDL dowload but goes back stuck in logo.
I wrote deadlock cause adb regular commands dont work, I need to flash a custom recovery from fastboot but cannot unlock the bootloader nor enter in download mode which I can enter only from adb. Yippee ki yay!
I have the latest HTC Sync Manager, Adb and fastboot, java sdk, Android sdk.
Any help??