Develop Bugs

Odin Firmware error

Hello, I am trying to install stock firmware on my note 4. I think I downloaded the correct firmware, but I am not technologically savvy and when I try to use Odin, I receive this error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone please help me??

glopez12323 said:
Hello, I am trying to install stock firmware on my note 4. I think I downloaded the correct firmware, but I am not technologically savvy and when I try to use Odin, I receive this error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone please help me??
Click to expand...
Click to collapse
On what firmware are you and what firmware did you download? Did you tried different version of ODIN?
Clicking from the Edge of Galaxy

norbarb said:
On what firmware are you and what firmware did you download? Did you tried different version of ODIN?
Clicking from the Edge of Galaxy
Click to expand...
Click to collapse
My phone was on 6.0.1 but I could not find the right firmware online so I tried to downgrade. Is that possible? And yes, I tried different versions of Odin :/

glopez12323 said:
My phone was on 6.0.1 but I could not find the right firmware online so I tried to downgrade. Is that possible? And yes, I tried different versions of Odin :/
Click to expand...
Click to collapse
When you go to settings ->about device what is your baseband version?
Clicking from the Edge of Galaxy

Unfortunately I do not have access to my phone anymore menus anymore. I can only access download mode and emergency recovery screen.

glopez12323 said:
Unfortunately I do not have access to my phone anymore menus anymore. I can only access download mode and emergency recovery screen.
Click to expand...
Click to collapse
In THIS THREAD is firmware EPH5 and ODIN witch worked on so many phones. Try this.

Stuck on system.img |fixed|

Hi guys
I flashed a custom twrp recovery & LOS rom for first time on my S9
and now I'm trying to flash stock rom back again I wiped my system and data and booted into download mode and trying to flash stock rom via odin but it keep tuck on system.img
Code:
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> dqmdbg.img
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 5284 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> up_param.bin
<ID:0/003> cm.bin
<ID:0/003> keystorage.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
also I've tried different versions of odin but still getting same problem.
or there is something I must do befor flashing stock rom on s9
It was a file problem I redownloaded the rom and it worked

abdelrahmannagi said:
Hi guys
I flashed a custom twrp recovery & LOS rom for first time on my S9
and now I'm trying to flash stock rom back again I wiped my system and data and booted into download mode and trying to flash stock rom via odin but it keep tuck on system.img
Code:
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> dqmdbg.img
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 5284 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> up_param.bin
<ID:0/003> cm.bin
<ID:0/003> keystorage.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
also I've tried different versions of odin but still getting same problem.
or there is something I must do befor flashing stock rom on s9
Click to expand...
Click to collapse
You messed up a S9 that's crazy
([emoji3590]09-09-18[emoji3590])

abdelrahmannagi said:
Hi guys
I flashed a custom twrp recovery & LOS rom for first time on my S9
and now I'm trying to flash stock rom back again I wiped my system and data and booted into download mode and trying to flash stock rom via odin but it keep tuck on system.img
also I've tried different versions of odin but still getting same problem.
or there is something I must do befor flashing stock rom on s9
Click to expand...
Click to collapse
How long have you waited? It takes a long time to flash system

PoochyX said:
You messed up a S9 that's crazy
Click to expand...
Click to collapse
Thank you for your helpless post
Haxomen said:
How long have you waited? It takes a long time to flash system
Click to expand...
Click to collapse
but how long I've waited for around 30 Mins :crying:

Really sunk. Can anyone help?

Long and sordid tale, but here I go (apologies in advance for length):
* 2 weeks ago an OTA update was available and I initiated the download and update right before going to sleep. I wake up to a blue screen that says unauthorized software had been flashed and I'd need to take the phone to the carrier and could be charged for repair
* Completely uninitiated to ROM flashing, after googling, downloading Odin 3.14.1B (patched) and 3.14.4 along with the latest Tmobile firmware, I try to no avail to get the firmware flashed. I figure it's because I don't have USB debugging selected and have no way to get to the option. Holding the up volume and Bixby keys could not get me to the bootloader either. By chance try to restart the phone one last time and boom, it works!
* I enable USB debugging, I back everything up. Everything seems fine. A week goes by, I'm working in an app, it hard freezes, and in trying to restart it happens again.
* Luckily, I still have everything I downloaded, and this time it was a quick task to flash the firmware and get everything working again. Post flash, the bootloader worked and I took the opportunity to clear the cache. I thought I finally cleared out whatever problem I was having with a clean download and cleared cache.
* Another week passes and tonight, same thing. Working in an app, freeze, restart, and blue screen. Frustrated, but I knew the fix. I attempted the same thing, but Odin 3.14.1B hangs at initializing for 30 min. I stupidly disconnect the phone and close Odin with the intent of starting the process over. Now I can't even get to the download screen or bootloader and a new error message reads: "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
* Smart Switch does not recognize a device and in attempting the recovery option there are no devices listed.
* In googling, I've found that if I immediately hold the up and down volume buttons right after restarting, my pc recognizes the device and Odin shows it as being added. I try flashing using the same ROM (G986USQU1ATCU), it gets pretty far and I'm encouraged, but then I get the following FAIL error:
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> quest.fv
<ID:0/003> testvector.fv
<ID:0/003> spunvm.bin
<ID:0/003> persist.img
<ID:0/003> carrier.img
<ID:0/003> dqmdbg.img
<ID:0/003> userdata.img
<ID:0/003> metadata.img
<ID:0/003> misc.bin
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 8868 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> xbl.elf
<ID:0/003> xbl_config.elf
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> aop.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> qupv3fw.elf
<ID:0/003> NON-HLOS.bin
<ID:0/003> dspso.bin
<ID:0/003> km4.mbn
<ID:0/003> storsec.mbn
<ID:0/003> sec.elf
<ID:0/003> bksecapp.mbn
<ID:0/003> tz_iccc.mbn
<ID:0/003> tz_hdm.mbn
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> uefi_sec.mbn
<ID:0/003> multi_image.mbn
<ID:0/003> vbmeta.img
<ID:0/003> vaultkeeper.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> super.img
<ID:0/003> dtbo.img
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And a message in red letters on the phone appears at the top left that reads: SECURE CHECK FAIL : super Image Extract failed. Googling this returns nothing.
* I download Android SDK along with tools package to try and start the phone in download mode to flash, but typing ADB Devices in the command line shows a blank "List of devices attached", even after killing and restarting the ADB server. I see "Samsung Mobile USB CDC Composite Device" in my computer's device list and this is the most updated driver. Attempting to load legacy Android ADB interface, Android composite ADB interface, or Samsung Android ADB interface results in an unrecognized device and still ADB Devices does not show any results. Dead end.
Having spent the last 8 hours on this, I'm at wits end. This may be the last time I purchase an Android device! Simply ridiculous that something like this could happen. I'm not reading the same problem anywhere else so it sounds like it's just me so possibly some sort of lemon.
Can anyone please help me? I'm really stuck and would be super appreciative. Thanks in advance!!

Only thing i can suggest is open odin as administrator and CSC file not HOME-CSC, home-csc doesn't wipe

I cannot do a hard reset or change rom of my boot looped(infinite loop in the phone logo) phone

I did put my Samsung Galaxy Tab 3 Lite SM-110 to charge and suddenly he begins a kind of boot loop.
Note: I did try so many things and had no way to me enter in the hard reset menu or in recovery mode(it is impossible by pressing buttons(believe me I tried every combination existing))
Note 2: The unique access possible is by download mode then, give me some solution that is by download mode.
Note 3: I did discover T110XXUANG2 is my PDA number based on the buy date 08/2014
Note 4: I did try every single one rom of my device(it had 5 based on my country) in each field(BL, AP, CP, CSC) and each one returns me the same error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> timh.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> obm.bin
<ID:0/003> DTim.Recovery
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Note 5: I did try to remove the DTim.Recovery of the rom with the 7zip but, when I remove it appears other error of another file and when I remove another one appears another one and that continue until over every file in the rom.

What checkboxes do you press in Odin?

A5 (2017) FRP bypass problem

Hello, I need to bypass FRP since my sister-in-law somehow got locked out from her Google account
Firmware version is A520FXXSFCTG8
I tried to use combination file method but when flashing back to A520FXXSFCTG8 it fails on hidden.img
Code:
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4586 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what I should do?