Hello, I am trying to install stock firmware on my note 4. I think I downloaded the correct firmware, but I am not technologically savvy and when I try to use Odin, I receive this error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone please help me??
glopez12323 said:
Hello, I am trying to install stock firmware on my note 4. I think I downloaded the correct firmware, but I am not technologically savvy and when I try to use Odin, I receive this error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone please help me??
Click to expand...
Click to collapse
On what firmware are you and what firmware did you download? Did you tried different version of ODIN?
Clicking from the Edge of Galaxy
norbarb said:
On what firmware are you and what firmware did you download? Did you tried different version of ODIN?
Clicking from the Edge of Galaxy
Click to expand...
Click to collapse
My phone was on 6.0.1 but I could not find the right firmware online so I tried to downgrade. Is that possible? And yes, I tried different versions of Odin :/
glopez12323 said:
My phone was on 6.0.1 but I could not find the right firmware online so I tried to downgrade. Is that possible? And yes, I tried different versions of Odin :/
Click to expand...
Click to collapse
When you go to settings ->about device what is your baseband version?
Clicking from the Edge of Galaxy
Unfortunately I do not have access to my phone anymore menus anymore. I can only access download mode and emergency recovery screen.
glopez12323 said:
Unfortunately I do not have access to my phone anymore menus anymore. I can only access download mode and emergency recovery screen.
Click to expand...
Click to collapse
In THIS THREAD is firmware EPH5 and ODIN witch worked on so many phones. Try this.
Related
Hello Xda Devs and members. I am stuck in a serious problem for me. I've recently flashed the lastest mj5 bootloader and today i wanted to flash philz or twrp(i have both on pc). The problem is that odin doesn't want to flash them. <ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am on 4.1.2 and I want to upgrade to 4.4.2. Help pls. Thank you!
So, can anyone help me pls!
So, can anyone help me pls!
I was trying to downgrade through Odin 3.10 to 4.4.4.. now i'm stuck with a error
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Some one please help me if there is any way to fix this problem..
flash the orginaal stock firmware wait for the root. dont attempt to downgrade to 4.4.4 its not gonna work
Any help new to all this any input of knowledge is greatly appreciated Is there a way to install Twrp on a Samsung s7 edge version sm-g935v qualcomm nougat? I seen a post to convert your s7 edge into the s8 with custom ROM, but to download that ROM for the s7 g935v devices its through twrp. Ihaven't been able to find a direct way to install it. Thanks in advance
I wished the same. I have not been able to figure out how to do a full backup of phone given all options say you must have a custom recovery or TWRP which none support the US qualcomm SM-g935v.
i need g935v 8.0 oreo twrp
i installed twrp in odin i face this error
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 23 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello,
My s4 mini suddenly stopped working. I almost read the whole forum. Tried to update the pit file with odin etc.... But no chance? Can someone point me somewhere usefull because I am kinsda lost at the moment.
This is what happens when I try to wipe the data:
imgur.com/a/IOuZe
Odin log when I try to update the pit file:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Thank you!
Hello, I need to bypass FRP since my sister-in-law somehow got locked out from her Google account
Firmware version is A520FXXSFCTG8
I tried to use combination file method but when flashing back to A520FXXSFCTG8 it fails on hidden.img
Code:
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4586 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what I should do?