Related
I have successfully put together a method to get Dolby Digital Plus and Viper4Android running on Redmi Note 8 Pro. Firstly I am rooted on 11.0.6 Global and using LR-TWRP as recovery. On another note I have tried nearly every recovery on this Forum but the only one that doesn't give me a black screen the LR-TWRP.
1. First you need to get the Android running in Permissive mode. For me the Magisk module DID NOT work. To get permissive I found a file on another forum that someone was using on other Redmi devices. It works perfectly with no flaws. Boot into TWRP flash Permissiver_v4_2.zip. And boot back into the device.
***Note.. If you upgrade rom using TWRP as I did from 11.0.2 to 11.0.6. You will have to reflash this file to get everything running properly.
2. Open Magisk and flash ViPER4Android_FX-v2.7.1.0(2710).zip. Reboot device and the open V4A. You should be prompted to install driver. Do so and reboot if prompted to, I don't remember for sure if it makes you or not.
3. Open Magisk and flash 2.1Audio_Modification_Library-v2.4.zip and then reboot.
***NOTE.. Only this version of Audio Modification I have had luck with getting this to run. I updated this file after having everything completely setup and working and it broke V4A and Dolby. Had to uninstall and reinstall this version..
4. Boot into TWRP, NOT Magisk and flash Dolby_Digital_Plus_v.6.5.zip
5. On reboot confirm everything is working. For me it is working flawlessly. Below is a link to the files you will need.
DOWNLOAD
Gonna try this now because the previous tutorial about v4a does work but the moment I plug in my earphones, the status changes to "abnormal"
djgilquirino said:
Gonna try this now because the previous tutorial about v4a does work but the moment I plug in my earphones, the status changes to "abnormal"
Click to expand...
Click to collapse
That is likely due to your phone not being in permissive mode. I've seen that guide as well. I took my past knowledge of getting Viper + Dolby to work and came up with this solution. Being in permissive mode is required for both apps to function
I just found out the reason why my V4A doesn't work when I plug in my headset/earphones. To all those who use poweramp and set your output to "Hi-Res Output", make sure your sample rate is set to 48khz. Setting it to 96khz and up changes the status on V4A to abormal and won't work.
Thanks bro. It is working for me as well you made my day..
rraghava10 said:
Thanks bro. It is working for me as well you made my day..
Click to expand...
Click to collapse
Awesome my dude!! Glad I could help. I'm new to writing guides but love this device and would like to encourage its development as much as I can.
When I flash V4A it functions properly however my SIM card is no longer recognize. When I uninstall V4A my sim is restored. What's up with that?
chugs said:
When I flash V4A it functions properly however my SIM card is no longer recognize. When I uninstall V4A my sim is restored. What's up with that?
Click to expand...
Click to collapse
That is extremely weird. Never heard of anything like that before. Just a couple thoughts but do you have BusyBox installed through Magisk and have your phone set to permissive already?? Also what MIUI version are you running. I have tested this successfully on 11.0.2 and 11.0.6 Global.
I'm still down on 10.4. I haven't been convinced to move to 11
Worked perfectly from EEU (EU) rom moved to 11.0.6 (Global)!
Thank you very much!
alejandromujica.rsm said:
Worked perfectly from EEU (EU) rom moved to 11.0.6 (Global)!
Thank you very much!
Click to expand...
Click to collapse
Your welcome and that's awesome.. Glad I could help bro!
https://ibb.co/YLt7r7s result miui global 11.0.2 err
anasfanani said:
https://ibb.co/YLt7r7s result miui global 11.0.2 err
Click to expand...
Click to collapse
You are not permissive. That is the exact error I got before I found the file I reference to flash to get 'permissive'. To check your status go to terminal and first 'su' to get root. Then type 'getenforce'. Make sure your device is showing permissive. If this is notthe problem I would be surprised. Let me know and I will help you work the problem..
bpawnz said:
You are not permissive. That is the exact error I got before I found the file I reference to flash to get 'permissive'. To check your status go to terminal and first 'su' to get root. Then type 'getenforce'. Make sure your device is showing permissive. If this is notthe problem I would be surprised. Let me know and I will help you work the problem..
Click to expand...
Click to collapse
Thanks. The problem is in selinux magisk module. I uninstalled and install other selinux app from https://github.com/MrBIMC/SELinuxModeChanger and its works
anasfanani said:
Thanks. The problem is in selinux magisk module. I uninstalled and install other selinux app from https://github.com/MrBIMC/SELinuxModeChanger and its works
Click to expand...
Click to collapse
Awesome. The file I reference will change se status from boot. That app I think you have to set it after every reboot if I remember correctly. Regardless I'm glad you got it working. FYI.. Dolby won't show up as an installed app if your not running permissive as well. I know that from trial and error. Glad you got it working!
Steps work. Will confirm if this is any better than standalone V4A
[Update]
Yup. Definitely way better sound quality comparing to the previous methods i used. Also thanks for sharing permissiver.. The previous way i used to change SELinux was a massive pain in my neck. (Global phone on 11.0.2 Global ROM) Looking to see how v4a will fare in upcoming custom ROMs.
Do we have any dual speaker audio sound mod for our note 8 pro global?
+1 to dual speaker mod!
bpawnz said:
Awesome. The file I reference will change se status from boot. That app I think you have to set it after every reboot if I remember correctly. Regardless I'm glad you got it working. FYI.. Dolby won't show up as an installed app if your not running permissive as well. I know that from trial and error. Glad you got it working!
Click to expand...
Click to collapse
Dolby digital is not working after android 10 update... need the version update
Dear all, please note and be aware, this mod will not work on android 10 because
1. dolby digital version is not supported as i stated earlier..
2. when we change SE linux to permissive, phone becomes laggy and many secured application will not work... i have personally tried that may be because of high security of android 10.. i think we will need a custom rom
It's that time of the year....
Recovery: download (6th Mar '21)
Gapps: download (16th Feb '21)
Lineage 18.1: download (8th Mar '21)
Please report stuff that doesn't work in this thread.
Update: 8th March
Recently fixed:
Bluetooth
Setting a lock screen
AUX / Line Out
Encryption
Gallery speed
Limitations of the current Lineage version:
VoLTE is disabled (will unfortunately not be able to fix that easily)
Dual SIM is not working (for devices that have Dual SIM)
Speakers do not sound as good as on stock
Camera is not as good as stock
Battery life when the screen is on is better on stock than on Lineage
------------
For developers:
device: https://review.lineageos.org/c/LineageOS/android_device_motorola_clark/+/304226/2
kernel: https://review.lineageos.org/c/LineageOS/android_kernel_motorola_msm8992/+/304218/1
vendor: https://github.com/chrmhoffmann/proprietary_vendor_motorola/tree/lineage-18.1
Note: Credits go to the usual lineage team from whom the device benefits enormously. Also the previous device maintainers have done a great job and we're still benefiting from that. E.g. the camera reverse engineering.
chrmhoffmann said:
It's that time of the year....
Recovery: download (16th Feb '21)
Gapps: download (16th Feb '21)
Lineage 18.1: download (16th Feb '21)
Please report stuff that doesn't work in this thread.
------------
For developers:
device: https://review.lineageos.org/c/LineageOS/android_device_motorola_clark/+/304226/2
kernel: https://review.lineageos.org/c/LineageOS/android_kernel_motorola_msm8992/+/304218/1
vendor: https://github.com/chrmhoffmann/proprietary_vendor_motorola/tree/lineage-18.1
Click to expand...
Click to collapse
Hello Chris, first of all, thanks for continuing on 18.1. I installed the rom and it booted fine. The set-up was buggy and laggy an kept crashing on setting up screen pattern. So I can't set screen pattern/pincode/password. Also I installed some apps from play store like whatsapp,gmail, telegram and they are doing fine. The phone gets hot and battery drains fast. Ambient display is a bit buggy, it's not working everytime. Anyways for the first build it's quite good. Thanks again
Maybe anybody else can also test?
Yes, setting up lock screen is broken. Will fix it in next build.
Chris
!
[QUOTE = "chrmhoffmann, post: 84511557, member: 361777"]
Да, не работает настройка экрана блокировки. Исправлю в следующей сборке.
Крис
[/ ЦИТИРОВАТЬ]
Dear Chris, everything is superb, but the function of broadcasting the screen in the quick settings menu does not work when connected (miracast) the phone is overloaded
I think bluetooth headsets are broken.
Chris
chrmhoffmann said:
I think bluetooth headsets are broken.
Chris
Click to expand...
Click to collapse
I can confirm that, it connects with my Haylou GT1 Pro but no sound.
Fixed. Uploading new build that fixes bluetooth and screen lock.
Note: If you have previously tried to setup lock screen, you will have to reset device (factory reset/wipe). Otherwise the device will crash right after bootanim stops. Sorry for that!!!
chrmhoffmann said:
Fixed. Uploading new build that fixes bluetooth and screen lock.
Note: If you have previously tried to setup lock screen, you will have to reset device (factory reset/wipe). Otherwise the device will crash right after bootanim stops. Sorry for that!!!
Click to expand...
Click to collapse
Thank you Chris, bluetooth and screen lock are fixed!
chrmhoffmann said:
Fixed. Uploading new build that fixes bluetooth and screen lock.
Note: If you have previously tried to setup lock screen, you will have to reset device (factory reset/wipe). Otherwise the device will crash right after bootanim stops. Sorry for that!!!
Click to expand...
Click to collapse
Can it be dirty flashed or should we do a clean install? It's cumbersome working with LOS recovery so the less I have to deal with it the better. Other than recovery it's a nice smooth rom. Thanks again
Wheels564 said:
Can it be dirty flashed or should we do a clean install? It's cumbersome working with LOS recovery so the less I have to deal with it the better. Other than recovery it's a nice smooth rom. Thanks again
Click to expand...
Click to collapse
I did a clean install, you can try dirty flash.
moviefirst said:
I did a clean install, you can try dirty flash.
Click to expand...
Click to collapse
I did a clean install. Since I have two of these phones I'm using this one for testing purposes for now and have 14.1 on the other one for daily use. At some point I'll change over to the 18.1 phone. I really like that dark theme is enabled on this rom that 14.1 never had It helps save battery.
which version of magisk will work?
Could someone test Netflix?
chrmhoffmann said:
Could someone test Netflix?
Click to expand...
Click to collapse
Seems to work fine in the U.S. on wifi. I'll let it run for a while to make sure it's stable. It appears to be running 1080p.
chrmhoffmann said:
Could someone test Netflix?
Click to expand...
Click to collapse
Netflix working here in the Netherlands, but the phone is lagging and takes time to open apps. Also I think battery was better in 17.1
In the camera I've noticed there's no icon to save to sdcard. also unless they've change snap camera I can't get the back or home button to come up to exit camera. I have to long press the power button to get access to home icon.
[email protected] said:
which version of magisk will work?
Click to expand...
Click to collapse
Latest version 21.4 works.
Wheels564 said:
In the camera I've noticed there's no icon to save to sdcard. also unless they've change snap camera I can't get the back or home button to come up to exit camera. I have to long press the power button to get access to home icon.
Click to expand...
Click to collapse
.
Swipe down from top to see home button. Save to sd card did not work on 17.1 so he removed the icon. Thanks for helping me find new forum!
Link to gapps is not working here.
Sorry for partial reposting this from 17.1 forum. Seems very functional on WiFi. Phone does not read VZW SIM on boot and can't pick up APN. I had to choose VZWINTERNET APN. Then LTE works for 30 seconds. Data drops for maybe a minute, then falls back to 3G which works. If LTE worked I think we would be golden.
Also get "DM config update keeps stopping" error. Not sure if this is related to SIM. I used NikGapps but don't think it is related.
Photos can not access SD card but Files has no problem. Edit. My bad. Photos works fine.
kb8no said:
Latest version 21.4 works.
.
Swipe down from top to see home button. Save to sd card did not work on 17.1 so he removed the icon. Thanks for helping me find new forum!
Link to gapps is not working here.
Sorry for partial reposting this from 17.1 forum. Seems very functional on WiFi. Phone does not read VZW SIM on boot and can't pick up APN. I had to choose VZWINTERNET VPN. Then LTE works for 30 seconds. Data drops for maybe a minute, then falls back to 3G which works. If LTE worked I think we would be golden.
Also get "DM config update keeps stopping" error. Not sure if this is related to SIM. I used NikGapps but don't think it is related.
Photos can not access SD card but Files has no problem.
Click to expand...
Click to collapse
Get a logcat when your trying to use LTE for Chris. I don't have a sim in my 18.1 phone or I would.
Link to MindTheGapps from OP is obsolete and updated link found on LOS link. I used NikGapps before and started over with clean flash using MindTheGapps but found it made no difference. Phone still does not read VZW SIM on boot and can't pick up APN. I had to again manually choose VZWINTERNET APN. Then LTE works for 30 seconds. Data drops for maybe a minute, then falls back to 3G which works and I get about 2 Mbps. Continue to get error "DM config update keeps stopping". I now believe this is related.
Has anybody yet tried TWRP from 17.1 thread?
Advanced restart is missing from developer options.
Addendum: I put in my ATT SIM. It found the APN and imported it correctly. It started LTE and similarly died. Data never came back at a lower rate.
Latest rom : lineage-19.1-20220928-UNOFFICIAL-clover.zip, see this link :
Changelog :
- Sept Security Patch
- Update cam HAL to LA.UM.10.2.1.r1-03300-sdm660.0.
- Switch to 4.19 Nyx kernel
Installation instructions :
- Perform a backup of your current ROM (optional)
- Use latest 4.19 twrp created by pix106: https://androidfilehost.com/?fid=15664248565197205779)
- Reboot into recovery/twrp, format data, then reboot into recovery/twrp again.
- Flash ROM.
- Flash GApps is optional.
What's not working:
Let me know.
Known issues :
- Disabled Encryption
Please post the bug along with log (use syslog).
Source :
Kernel : clover
Device tree : sdm660
Update : latest version lineage-19.0-20211105-UNOFFICIAL-clover-new.zip pass safetynet.
Tried already in a mi pad 4 (8") and everything working so far.
Great work!
Does it support Monet theming?
Everything works OK, except I cannot change battery indicator (to circle, it just stays battery-shaped) and also can't show battery's %
Just nothing happens when i try to change these
redcord said:
Everything works OK, except I cannot change battery indicator (to circle, it just stays battery-shaped) and also can't show battery's %
Just nothing happens when i try to change these
Click to expand...
Click to collapse
Yes...some features are still not working as it depends on lineage source.
Installed Ok and runs - but with a few issues. Playstore not certified. Android system intelligence crashes regularly. It insisted on formatting my SD card so I let it but now I will have to put back all my music and books. Never mind. I will keep using it and updating for now.
Plus: I just tried my Bluetooth earbuds. They paired fine and are working with aptX
Plus: USB PD charger gives Charging rapidly
Everything works OK, except stop working Android System intelligence
Mi pad 4 (8") Wifi
GregEden said:
Installed Ok and runs - but with a few issues. Playstore not certified. Android system intelligence crashes regularly. It insisted on formatting my SD card so I let it but now I will have to put back all my music and books. Never mind. I will keep using it and updating for now.
Plus: I just tried my Bluetooth earbuds. They paired fine and are working with aptX
Plus: USB PD charger gives Charging rapidly
Click to expand...
Click to collapse
Playstore is certfied using patched boot.img by magisk and magisk hide. I didn't test using android system inteligence...will check later.
It's beautiful and quite stable, but with some minor issues.
1. Android System Intelligence keeps stop working. There's already a workaround by installing "ExtraPixel" module from this channel https://t.me/randomfilezz, but I suggest to make a fix inside the ROM.
2. Yep, Monet theming engine, ported by @kdrag0n , is open-sourced, so maybe consider adding it and makes it a better ROM. https://www.xda-developers.com/android-12-material-you-theming-system-recreated/
3. Always on display feature missing. Maybe you forgot to add it.
And the clock position and size on lock screen without notification is not accurate, compared to other devices.
Ralph Chen said:
And the clock position and size on lock screen without notification is not accurate, compared to other devices.
Click to expand...
Click to collapse
Did you compared to other device that running with lineageos 19.0?
Ralph Chen said:
It's beautiful and quite stable, but with some minor issues.
1. Android System Intelligence keeps stop working. There's already a workaround by installing "ExtraPixel" module from this channel https://t.me/randomfilezz, but I suggest to make a fix inside the ROM.
2. Yep, Monet theming engine, ported by @kdrag0n , is open-sourced, so maybe consider adding it and makes it a better ROM. https://www.xda-developers.com/android-12-material-you-theming-system-recreated/
3. Always on display feature missing. Maybe you forgot to add it.
Click to expand...
Click to collapse
Those features will be on this device once it is available in lineage source.
sabar_op said:
Did you compared to other device that running with lineageos 19.0?
Click to expand...
Click to collapse
I compared with other ROMs such as pixel experience.
Maybe it has to be in the center of the screen.
Ralph Chen said:
I compared with other ROMs such as pixel experience.
Maybe it has to be in the center of the screen.
Click to expand...
Click to collapse
Not sure about that, perhaps it is new style of lineageos 19..or lineage source not implemented yet to center the clock in the lockscreen...
My microphones are not working, via wired or bluetooth connections.
And the internal mic is dead too.
GregEden said:
My microphones are not working, via wired or bluetooth connections.
And the internal mic is dead too.
Click to expand...
Click to collapse
Are you sure? I am test it using mictest...and it works properly.
sabar_op said:
Are you sure? I am test it using mictest...and it works properly.
Click to expand...
Click to collapse
OK it works now. I did a reboot, and that did not help. I went into the recorder settings and toggled autodetect off then back on. And now it is working. I will test again tomorrow with my Duolingo lesson.
Dear all, may I ask for help please? I just manager to load 19.0 by following the above steps. However when it comes to the initial set up page, where it says checking for updates, it goes blank. How do I resolve this?
Btayyyy said:
Dear all, may I ask for help please? I just manager to load 19.0 by following the above steps. However when it comes to the initial set up page, where it says checking for updates, it goes blank. How do I resolve this?
Click to expand...
Click to collapse
I had that issue but I do not remember how I resolved it. I think I just kept swiping up until I could select next and it move on.
Hey guys, has anyone gotten Gpay to work on lineage 19.1? I have done the following and have had very odd results. Firstly, I am passing safteynet and my device is registered as play certified in Google play store. I'm seeing where sometimes gpay won't open at all and when it does it says it is unable to load my payment methods.
Specs:
OS - linageOS 19.1 (latest build as of this post)
GAPPS - Mindthegapps (latest build as of this post)
Steps taken:
Installed magisk, enabled zygisk and rebooted
Installed magisk hide props module then rebooted
Installed shamiko module then rebooted
Installed universal safteynet fix (zygisk) then rebooted
Configured denylist in magisk checking GPS (all), and Gpay (all) rebooted
Changed device fingerprint with magisk hide props module to a certified one then rebooted
Additional steps taken:
I cleared data from GPS, play store and Gpay and rebooted
I tried a different device fingerprint and rebooted (clearing data like above afterwards and rebooting again)
I have done a complete fresh install of my OS and tried again from scratch.
I also tried seeing is renaming magisk would help at all, it didn't
It appears I'm getting nowhere with this. If anyone has gotten it to work and has some insight it's be greatly appreciated!
Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.
deathblade said:
Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.
Click to expand...
Click to collapse
Hey deathblade!
Thanks for helping me out on the other thread.
Just wanted to check in, did you use the official build or the unofficial one with the Pixel Goodies? I'm intending/hoping to have full functionalities of Google Pay using the unofficial build, but from your post it seems that I can't have the Pixel experience if I want the ROM to work with Google Pay?
HW898 said:
Hey deathblade!
Thanks for helping me out on the other thread.
Just wanted to check in, did you use the official build or the unofficial one with the Pixel Goodies? I'm intending/hoping to have full functionalities of Google Pay using the unofficial build, but from your post it seems that I can't have the Pixel experience if I want the ROM to work with Google Pay?
Click to expand...
Click to collapse
I'm using the official build. I think the unofficial has everything needed to use Gpay and have some pixel things baked in. So might be worth a look in your case
deathblade said:
I'm using the official build. I think the unofficial has everything needed to use Gpay and have some pixel things baked in. So might be worth a look in your case
Click to expand...
Click to collapse
Aite, I will try out the unofficial one and see if GPay works there too. Thanks for the headsup!
HW898 said:
Aite, I will try out the unofficial one and see if GPay works there too. Thanks for the headsup!
Click to expand...
Click to collapse
I just remembered, the unofficial is setup to pass safteynet out the box, but more maybe needed for Gpay to work. Once you flash it try it out, if you run into issues I can provide what I did to get Gpay working
deathblade said:
Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.
Click to expand...
Click to collapse
Hi there, trying out the official build after experiencing some problems on the unofficial one. Any alternatives to pixiel-ing the ROM?
HW898 said:
Hi there, trying out the official build after experiencing some problems on the unofficial one. Any alternatives to pixiel-ing the ROM?
Click to expand...
Click to collapse
Not that I've found, however I did notice if you install the pixelify module then uninstall it, it does seem to leave some stuff behind. Like I still have the option to use Hold for me and direct my call. So it might work out where you can install it to get the things you want then remove it to get Gpay working
deathblade said:
Not that I've found, however I did notice if you install the pixelify module then uninstall it, it does seem to leave some stuff behind. Like I still have the option to use Hold for me and direct my call. So it might work out where you can install it to get the things you want then remove it to get Gpay working
Click to expand...
Click to collapse
I see... So these also means stuff like Now playing etc. will be gone too right?
Also, did you experience the problems I've faced in the unofficial build? sounds cannot change etc. as posted in main thread
HW898 said:
I see... So these also means stuff like Now playing etc. will be gone too right?
Also, did you experience the problems I've faced in the unofficial build? sounds cannot change etc. as posted in main thread
Click to expand...
Click to collapse
Nope now playing is still there. I really only used it the module to force call screening to show up. But I have pretty much everything I remember from stock plus a few phone related goodies. I never tried the unofficial build but on the official I do not have that issue
deathblade said:
Nope now playing is still there. I really only used it the module to force call screening to show up. But I have pretty much everything I remember from stock plus a few phone related goodies. I never tried the unofficial build but on the official I do not have that issue
Click to expand...
Click to collapse
I see... I will try installing the official one without magisk as I won't want to meddle with rooting stuff for now, will get back with results asap!
deathblade said:
Hey guys, has anyone gotten Gpay to work on lineage 19.1? I have done the following and have had very odd results. Firstly, I am passing safteynet and my device is registered as play certified in Google play store. I'm seeing where sometimes gpay won't open at all and when it does it says it is unable to load my payment methods.
Specs:
OS - linageOS 19.1 (latest build as of this post)
GAPPS - Mindthegapps (latest build as of this post)
Steps taken:
Installed magisk, enabled zygisk and rebooted
Installed magisk hide props module then rebooted
Installed shamiko module then rebooted
Installed universal safteynet fix (zygisk) then rebooted
Configured denylist in magisk checking GPS (all), and Gpay (all) rebooted
Changed device fingerprint with magisk hide props module to a certified one then rebooted
Additional steps taken:
I cleared data from GPS, play store and Gpay and rebooted
I tried a different device fingerprint and rebooted (clearing data like above afterwards and rebooting again)
I have done a complete fresh install of my OS and tried again from scratch.
I also tried seeing is renaming magisk would help at all, it didn't
It appears I'm getting nowhere with this. If anyone has gotten it to work and has some insight it's be greatly appreciated!
Click to expand...
Click to collapse
Just also wanted to clarify in the case I decide to install magisk, which module do you install exactly? All of them? Zygisk/hide props module/shamiko/universal safetynet fix?
HW898 said:
Just also wanted to clarify in the case I decide to install magisk, which module do you install exactly? All of them? Zygisk/hide props module/shamiko/universal safetynet fix?
Click to expand...
Click to collapse
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them
deathblade said:
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them
Click to expand...
Click to collapse
Aite thanks for the help mate! just installed but apparently, i couldn't find gapps despite sideloading it.. might have to reinstall again
Hmm safetynet fix seems to fail, can't pass cts profile.. any step by step guides by any chance?
deathblade said:
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them
Click to expand...
Click to collapse
HW898 said:
Hmm safetynet fix seems to fail, can't pass cts profile.. any step by step guides by any chance?
Click to expand...
Click to collapse
That's where magisk hide props comes in. I don't have a full guide that I know of but I could do a quick wtite up tomorrow for you
deathblade said:
That's where magisk hide props comes in. I don't have a full guide that I know of but I could do a quick wtite up tomorrow for you
Click to expand...
Click to collapse
I got it working after following a guide~
Unfortunately features like now playing isn't working. the rest is pretty much okay tho
HW898 said:
I got it working after following a guide~
Unfortunately features like now playing isn't working. the rest is pretty much okay tho
Click to expand...
Click to collapse
You install the pixelify module? Also can you explain how it's not working?
deathblade said:
You install the pixelify module? Also can you explain how it's not working?
Click to expand...
Click to collapse
Nope, I didn't. Other than the modules to hide from banking apps as mentioned above, I installed a pixel launch module here to make it for pixel-like: https://forum.xda-developers.com/t/app-mod-pixel-launcher.4442077/
Other than that nothing else.
It doesn't;t work in the sense that it does not pick up music, even popular ones. The settings are there though, I can see them. It just doesn't identify any songs
HW898 said:
Nope, I didn't. Other than the modules to hide from banking apps as mentioned above, I installed a pixel launch module here to make it for pixel-like: https://forum.xda-developers.com/t/app-mod-pixel-launcher.4442077/
Other than that nothing else.
It doesn't;t work in the sense that it does not pick up music, even popular ones. The settings are there though, I can see them. It just doesn't identify any songs
Click to expand...
Click to collapse
This is the pixelify module I installed then removed, you can give it a try.
GitHub - Kingsman44/Pixelify: Magisk module to enables pixel exclusive features and ui
Magisk module to enables pixel exclusive features and ui - GitHub - Kingsman44/Pixelify: Magisk module to enables pixel exclusive features and ui
github.com
My camera doesn't work anymore since this update but I have magisk and the universal safety net fix module (last version)
it is not a hardware problem the camera works well with the bootloader locked
What?
Pinokaille said:
My camera doesn't work anymore since this update but I have magisk and the universal safety net fix module (last version)
it is not a hardware problem the camera works well with the bootloader locked
Click to expand...
Click to collapse
solution: downgrade lol
Pinokaille said:
My camera doesn't work anymore since this update but I have magisk and the universal safety net fix module (last version)
it is not a hardware problem the camera works well with the bootloader locked
Click to expand...
Click to collapse
Same issue for me..... previous release no issue..... model XEF device
Pinokaille said:
My camera doesn't work anymore since this update but I have magisk and the universal safety net fix module (last version)
it is not a hardware problem the camera works well with the bootloader locked
Click to expand...
Click to collapse
So it does not "break the camera", it makes your camera stop working IF you have the bootloader unlocked.
Stop being so dramatic in post titles, you are not being specific and you are only scaring people for no reason.
Arobase40 said:
Except than your phone is NOT a French one as you imported from Italy as you said before then you flashed a French firmware which won't change the camera issue... l
Arobase40 said:
Except than your phone is NOT a French one as you imported from Italy as you said before then you flashed a French firmware which won't change the camera issue... lol
Click to expand...
Click to collapse
ITV model retturened to Amazon i bought a french model
Click to expand...
Click to collapse
Arobase40 said:
@rafik25
If you really have a new French A52S phone so you should never have this camera issue anytime whatever the firmware !
Click to expand...
Click to collapse
ok im a lier
CVE2 also breaks camera
Arobase40 said:
I don't understand why you are trying to say ?
Do you mean you really have a camera issue even with a real French phone ???
If that is real then it's a very bad news for all of us !!!
You should know that Amazon France is also selling phones from different countries and you didn't know...
Can you post a screenshot of the software information where the CSC is shown ?
Click to expand...
Click to collapse
ok
Retrying rooting with April Realease and camera works..... weird
My camera works with the April release, magisk 24.3, zygisk turned on and safety net 2.2.1 installed. In the may release the camera fails with same setup. Curious if SElinux permissive helps hmmmmm but can't be bothered trying because of the hassle of starting from scratch to go back to april release.
Arobase40 said:
What I notice is that you are using a weird, uncommon and unusual version of Magisk 24313 !
I didn't even know it existed and I don't know if it's an official one or not...
I will try it and report as it is the first time I have a report from a French phone having this camera issue !!!
Finally, I also see you are using "SELinux permissive" module which I never used so I don't know if it can affect your camera...
I will test both of them to see if one of them can cause the camera issue and I will report... ^^
Click to expand...
Click to collapse
Magisk canary on Github ! I am not completely stupid to go download anywhere
I discovered that (if you have Magisk of course) you can use the MagiskHide Props Config module to force "BASIC key attestation" (Download and install the module, reboot, open terminal emulator, type "su", then type "props") by spoofing to have a different device (Galaxy A5 2017 is the one I use, others should work fine too though). That way, the camera works, even when SafetyNet fails, without having to force-close after every reboot. Hope this helps.
Pokemetti2 said:
I discovered that (if you have Magisk of course) you can use the MagiskHide Props Config module to force "BASIC key attestation" (Download and install the module, reboot, open terminal emulator, type "su", then type "props") by spoofing to have a different device (Galaxy A5 2017 is the one I use, others should work fine too though). That way, the camera works, even when SafetyNet fails, without having to force-close after every reboot. Hope this helps.
Click to expand...
Click to collapse
Thx a lot bro. it works for me. Yeah..... may update CVE2 XEF csc
I can confirm this works on my phone with LUX firmware with the May update CVE2. Set it to use A52 5G (SM-526B). Camera working without reboot. Great find and thanks!!