Hi, my redmi note 5 Pro (whyred) is in Chinese rom v11.0.2.0 PEICNXM,
I tried Miflash flashed with Global v11.0.3.0 PEIMIXM but encountered error " antirbpass error".
Bootloader was Unlocked.
With OrangeFox recovery.
I have checked the anti value of current rom =4.
And the Global rom I am flashing is also =4.
They are of same equal value.
What could have gone wrong?
Please advise /help
Thank you.
nobody able to advise or help?
Zozomon said:
nobody able to advise or help?
Click to expand...
Click to collapse
This forum just basically dead, almost none of them use RN5pro anymore.
You need to flash dummy image before flashing the rom to bypass that error, search on miui forum or others to get that dummy image, i forget where to get it.
Thanks for the information.
Try to flash 11.0.3.0 via custom recovery and let me know if it works
Zozomon said:
Hi, my redmi note 5 Pro (whyred) is in Chinese rom v11.0.2.0 PEICNXM,
I tried Miflash flashed with Global v11.0.3.0 PEIMIXM but encountered error " antirbpass error".
Bootloader was Unlocked.
With OrangeFox recovery.
I have checked the anti value of current rom =4.
And the Global rom I am flashing is also =4.
They are of same equal value.
What could have gone wrong?
Please advise /help
Thank you.
Click to expand...
Click to collapse
if you have orangefox recovery you can download global 11.0.3 recovery zip and flash via recovery , no need of miflash tool
here is the direct download link of this stock recovery rom
recovery rom link
Thank you very much. I managed to flashed to the Global rom with your solution.
gursewak.10 said:
if you have orangefox recovery you can download global 11.0.3 recovery zip and flash via recovery , no need of miflash tool
here is the direct download link of this stock recovery rom
recovery rom link
Click to expand...
Click to collapse
Sidgup1998 said:
Try to flash 11.0.3.0 via custom recovery and let me know if it works
Click to expand...
Click to collapse
Thanks!
Zozomon said:
Thanks!
Click to expand...
Click to collapse
Welcome bro
Related
Hello everyone! I have a mi l2 lite with the bootloader unlocked and I installed the GSI pixel experience. Now I would like to put the Rom stock 9.6.8.0,
which steps should I do for a clean and safe job? thank you so much!
are going to root the stock rom?
do uou want to relock the bootloader?
Just download the stock ROM and flash through miflash tiol
LUNARIO said:
Just download the stock ROM and flash through miflash tiol
Click to expand...
Click to collapse
Miflash don't recognize my device....
clansman943 said:
Miflash don't recognize my device....
Click to expand...
Click to collapse
Did you activate USB-Debugging on your device and did you start MiFlash while your device was in fastboot mode?
clansman943 said:
Hello everyone! I have a mi l2 lite with the bootloader unlocked and I installed the GSI pixel experience. Now I would like to put the Rom stock 9.6.8.0,
which steps should I do for a clean and safe job? thank you so much!
Click to expand...
Click to collapse
Download IMG from https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871, then run ./flash-all.sh
Can you guys help me?
Hi, I had upgraded my Mi A2 Lite to Pie and the had Twrp installed and Rooted it with Magisk. Tried installing multiple treble ROMS, all had issues, last one had the wirless feature not working, so I gave up and went back to stock using a twrp backup that I have created before ... to my surprise wifi was still not working on stock !! Can you please let me know how you solved it and where did you obtain that stock ROM??
please help
flashed miui 11 beta rom via twrp recovery,its too buggy,i lost my custom recovery(twrp),i am trying to flash a custom recovery,its not working ,booting to custom recovery internal memmory 0, i want to roll back miui10.bootloader unlocked already
sry for my bad english
Flash miui10 fastboot rom using miflash
SunilSuni said:
Flash miui10 fastboot rom using miflash
Click to expand...
Click to collapse
it is safe？
fasilpoochengal said:
it is safe？
Click to expand...
Click to collapse
Yes it is safe.. fastboot method is always a safest method to flash MIUI ROM
Note : if your device is global variant then you can flash global ROM and lock your bootloader but if your device is Chinese variant then do not flash global ROM and lock bootloader
SunilSuni said:
Yes it is safe.. fastboot method is always a safest method to flash MIUI ROM
Note : if your device is global variant then you can flash global ROM and lock your bootloader but if your device is Chinese variant then do not flash global ROM and lock bootloader
Click to expand...
Click to collapse
Thanks
So it's safe to rollback from stable miui 11 to miui 10 stable. Bootloader's unlocked, global phone global firmware. Prob do the fastboot procedure. TIA.
Why?
Hi i want to rollback my global stable 10.3.2 to 9.5.19 . Please guide me.
SunilSuni said:
Yes it is safe.. fastboot method is always a safest method to flash MIUI ROM
Note : if your device is global variant then you can flash global ROM and lock your bootloader but if your device is Chinese variant then do not flash global ROM and lock bootloader is loc
Click to expand...
Click to collapse
My bootloader is locked. Can i flash through setting/ choose update package?
Rafiemvi said:
My bootloader is locked. Can i flash through setting/ choose update package?
Click to expand...
Click to collapse
You have to flash 10.3.1 Oreo ROM and then you can flash older version
SunilSuni said:
You have to flash 10.3.1 Oreo ROM and then you can flash older version
Click to expand...
Click to collapse
Thanx for responding. Need to know by which method i need to flash ? Fastboot with .tgz or zip file through choose update package? I tried flashing 9.5.19 zip file from choose update package it showed unable to flash old version.
Thank you.
Rafiemvi said:
Thanx for responding. Need to know by which method i need to flash ? Fastboot with .tgz or zip file through choose update package? I tried flashing 9.5.19 zip file from choose update package it showed unable to flash old version.
Thank you.
Click to expand...
Click to collapse
Go for fastboot method (requires unlocked bootloader)
Please leave "Thanks" if this thread helped you.
________________________________________
LEGEND :
(RECOVERY) : ZIP FILE FLASHED via TWRP
(FASTBOOT) : .IMG FILES FLASHED via MiFLASH
(TWRP) : Recovery .IMG file flashed via Fastboot
________________________________________
OTHER USEFULL FILES FOUND :
MIUIPRO.NET MIUI 11 9.10.10 ( RECOVERY ) : https://mega.nz/#!M8hXEYAC!e6BxOr5HngCmfNSCOo4ZVmkTKgkU8KUheaOkrKAOHyo
MIUIPRO.NET TWRP : https://mega.nz/#!004lWKjD!V2ZAWBv9zjMaNISkOAnuUlBzzet1QFIsEXFHBVFlaoM
________________________________________
Prequisites :
FASTBOOT + RECOVERY+BOOT : https://mega.nz/#!kpx2wIbY!sxWOxoRGjXribkqMuNSjJCIk94bhrf4M5MSdWpztspE
MiFLASH for REDMI NOTE 8 PRO : https://mega.nz/#!RpxkzSoK!UunxanbaWOkPVYq_NAJakWbc2D0lDygPuTNCc-OO2Og
LATEST EEA ( GLOBAL ) REDMI NOTE 8 PRO FIRMWARE : https://mega.nz/#!p8RDiCRB!2lSEAbtV364L61ZXd_tfAbs53AlsRjmQWa53JRE9BoU
________________________________________
1. Unlock bootloader.
2. Open the MiFLASH, and connect your phone via USB in Fastboot mode.
3. Your phone should be on the list of connected devices.
4. Click on "Browse" -> "Advenced|" and localize file : flash_all_except_data_storage.bat from downloaded FIRMWARE folder.
5. Click FLASH and wait patiently.
6. Phone will Reboot and wait patiently.
7. DONE
________________________________________
Q&A
Does TWRP from that chinese forum presist after flashing ?
No. Phone will go back to original RECOVERY after 2nd restart.
Does that TWRP is functional with REDMI NOTE 8 PRO ?
Some functions may work, some not.
Installing root with this TWRP will cause bootloop.
When something go wrong....
If you end up with BOOTLOOP, for any reason ( Magisk etc. )
Just flash boot.img from FASTBOOT + RECOVERY+BOOT and bring your phone back to life.
This boot.img was extracted from firmware linked above.
_____
Command : fastboot flash boot boot.img
_____
See also :
[GUIDE] How to increase cellular reception strenght in Redmi Note 8 Pro : https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-how-to-increase-cellular-t3987515
Why with TWRP? We can't use MI flash?
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
I am download MI global rom, and want to flash it instead if my EU rom that I have.
I try to unlock bootloader but must wait 52 hours more..
But I wanted to do it with Mi flash tools..can I do that?
Decryption key for mega links?
Decryption key for mega links?
tze_vitamin said:
Why with TWRP? We can't use MI flash?
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
I am download MI global rom, and want to flash it instead if my EU rom that I have.
I try to unlock bootloader but must wait 52 hours more..
But I wanted to do it with Mi flash tools..can I do that?
Click to expand...
Click to collapse
Yes, I have also done it with Mi flash tools.
polfrank said:
So, I guess we have found a way to install twrp and it persists after flashing.
How about magisk? Does it still lead to bootloop efter following this process with twrp?
And how do we do a system update after at have twrp installed?
Click to expand...
Click to collapse
i was not able to install magisk, tried it several times yesterday.
astrakid said:
i was not able to install magisk, tried it several times yesterday.
Click to expand...
Click to collapse
Ok, thanks for reporting. I guess that Magisk just does not support our phone yet.
I have also tested Magisk v20 and got bootloop.
nakedowl said:
Personal note :
It may be possible to flash that chinese TWRP permanently, by replacing recovery.img in firmware images.
And flash it with MiFLASH.
Click to expand...
Click to collapse
Hey, it isn't working. error:"Flash recovery error"
polfrank said:
Yes, I have also done it with Mi flash tools.
Click to expand...
Click to collapse
Are you using the note 8 pro?
If yes, then it is fully supported by mi flash? I think it's the safest way to flash stock rom right now because you don't have to unlock the boot loader just to flash global or china rom.
enzy29 said:
Are you using the note 8 pro?
If yes, then it is fully supported by mi flash? I think it's the safest way to flash stock rom right now because you don't have to unlock the boot loader just to flash global or china rom.
Click to expand...
Click to collapse
I think that you have to unlock the BL first before you can access fastboot flashing, even with mi flash.l
enzy29 said:
Are you using the note 8 pro?
If yes, then it is fully supported by mi flash? I think it's the safest way to flash stock rom right now because you don't have to unlock the boot loader just to flash global or china rom.
Click to expand...
Click to collapse
polfrank said:
I think that you have to unlock the BL first before you can access fastboot flashing, even with mi flash.l
Click to expand...
Click to collapse
Unlock bootloader before use Mi flash. Trust me. You don't want to resurrect phone via adl mode
polfrank said:
I guess that Magisk just does not support our phone yet.
Click to expand...
Click to collapse
I use MIUI 11 9.10.17 (MiuiPro edition) for Redmi Note 8 Pro. Magisk work without problem (19.3). Some screenshots for you (Greek Translation by Spiros Kaparos) in attachment.
BusnjukAn said:
I use MIUI 11 9.10.17 (MiuiPro edition) for Redmi Note 8 Pro. Magisk work without problem (19.3). Some screenshots for you (Greek Translation by Spiros Kaparos) in attachment.
Click to expand...
Click to collapse
please give links, thanks
BusnjukAn said:
I use MIUI 11 9.10.17 (MiuiPro edition) for Redmi Note 8 Pro. Magisk work without problem (19.3). Some screenshots for you (Greek Translation by Spiros Kaparos) in attachment.
Click to expand...
Click to collapse
how did you install magisk? it is not working for me with original miui global 10.4.2.
astrakid said:
how did you install magisk? it is not working for me with original miui global 10.4.2.
Click to expand...
Click to collapse
The ROM is based on the Chinese beta version 9.10.17 Miui 11 and the Magisk is integrated into the ROM. Just flashed the archive with ROM from TWRP. I do not have a direct link to ROM - I downloaded it from the OTA server. You need to ask on the developers site.
BusnjukAn said:
The ROM is based on the Chinese beta version 9.10.17 Miui 11 and the Magisk is integrated into the ROM. Just flashed the archive with ROM from TWRP. I do not have a direct link to ROM - I downloaded it from the OTA server. You need to ask on the developers site.
Click to expand...
Click to collapse
Which ota server is it? Which developer site?
polfrank said:
Which developer site?
Click to expand...
Click to collapse
https://miuipro.info
BusnjukAn said:
https://miuipro.info
Click to expand...
Click to collapse
There is no links to Redmi Note 8 Pro ROM
https://www.staygyan.in/miui-11-beta-update-9-10-17-for-xiaomi-devices-download-links/
robbie_lpl said:
https://www.staygyan.in/miui-11-beta-update-9-10-17-for-xiaomi-devices-download-links/
Click to expand...
Click to collapse
Is this the one that is pre rooted with magisk?
nakedowl said:
Hello everyone,
I recently decided to have a go with swapping from Chinese ROM to Global ROM.
________________________________________
Prequisites :
FASTBOOT + RECOVERY+BOOT : https://mega.nz/#!kpx2wIbY!sxWOxoRGjXribkqMuNSjJCIk94bhrf4M5MSdWpztspE
MiFLASH for REDMI NOTE 8 PRO : https://mega.nz/#!RpxkzSoK!UunxanbaWOkPVYq_NAJakWbc2D0lDygPuTNCc-OO2Og
LATEST EEA ( GLOBAL ) REDMI NOTE 8 PRO FIRMWARE : https://mega.nz/#!p8RDiCRB!2lSEAbtV364L61ZXd_tfAbs53AlsRjmQWa53JRE9BoU
________________________________________
1. Unlock bootloader.
2. Open the MiFLASH, and connect your phone via USB in Fastboot mode.
3. Your phone should be on the list of connected devices.
4. Click on "Browse" -> "Advenced|" and localize file : flash_all_except_data_storage.bat from downloaded FIRMWARE folder.
5. Click FLASH and wait patiently.
6. Phone will Reboot and wait patiently.
7. DONE
________________________________________
Q&A
Does TWRP from that chinese forum presist after flashing ?
No. Phone will go back to original RECOVERY after 2nd restart.
Does that TWRP is functional with REDMI NOTE 8 PRO ?
Some functions may work, some not.
Installing root with this TWRP will cause bootloop.
When something go wrong....
If you end up with BOOTLOOP, for any reason ( Magisk etc. )
Just flash boot.img from FASTBOOT + RECOVERY+BOOT and bring your phone back to life.
This boot.img was extracted from firmware linked above.
_____
Command : fastboot flash boot boot.img
_____
Personal note :
It may be possible to flash that chinese TWRP permanently, by replacing recovery.img in firmware images.
And flash it with MiFLASH.
Click to expand...
Click to collapse
Does the TWRP and Magisk required to flash the global rom? Or if i flash your files via Mi flash it will flash only Stock Global Rom?
I have redmi note 5 pro and I have installed the latest orange fox recovery in it. Please tell me how can i downgrade my miui 11.0.3.0 to miui 10.2.1.0 oreo without bricking my device.
Thanks in advance
I'm not sure (wait for a proper answer) but I think ROMs from MIUI 9.5.19.0 and above are ARB4. I recommend that you flash a fastboot ROM that include the proper firmware for Oreo.
Fastboot ROMs: https://xiaomifirmwareupdater.com/archive/miui/whyred/
yes I recomend fastboot way too, not recovery's
I will like to ask people why recovery downgrading is risky as with custom recovery u can have n number of possibilities
Letrix said:
I'm not sure (wait for a proper answer) but I think ROMs from MIUI 9.5.19.0 and above are ARB4. I recommend that you flash a fastboot ROM that include the proper firmware for Oreo.
Fastboot ROMs: https://xiaomifirmwareupdater.com/archive/miui/whyred/
Click to expand...
Click to collapse
Thanks buddy for ur help, I successfully downgraded to 10.2.1.0.
One more question,what is the minimum ROM version that i can downgrade to (I have ARB 4)?
Now your ARB version is 4.
You can download the offical ROM image package and exract it.
Then open the file called "flash_all.bat". Look for "set CURRENT_ANTI_VER" in this file and look at the ARB version of the package.
If the anti level is 4 , it's safe to downgrade to this version.
If it's below 4, DO NOT flash the ROM or your phone will be bricked.
Yuki1001 said:
Now your ARB version is 4.
You can download the offical ROM image package and exract it.
Then open the file called "flash_all.bat". Look for "set CURRENT_ANTI_VER" in this file and look at the ARB version of the package.
If the anti level is 4 , it's safe to downgrade to this version.
If it's below 4, DO NOT flash the ROM or your phone will be bricked.
Click to expand...
Click to collapse
Thank u Buddy
From this info i cannot flash below global stable 9.5.19
And i just flashed it.
Means i m on the border
Good Day Everyone Please Help me
How to Install TWRP and Custom rom in redmi note 8 pro eu QGGEUXM android 10
and i already flash the TWRP and custom rom.
but After the restart it is now Bootloop please help me guyz Please...
perlene said:
Good Day Everyone Please Help me
How to Install TWRP and Custom rom in redmi note 8 pro eu QGGEUXM android 10
and i already flash the TWRP and custom rom.
but After the restart it is now Bootloop please help me guyz Please...
Click to expand...
Click to collapse
First you have to downgrade to Android V9, i don't remember which MIU Version that is.
@mxpower, this is strictly not true, I have been able to install Pixel Experience ROM straight from the Global ROM V12.0.3.0.QGGMIXM A10 without needing to downgrade first.
I followed this CFW migration guide correctly (method 2) with no bootloops and all working correctly.
@perlene You probably flashed the wrong TWRP version, to be safe, Flash full MIUI firmware from SP Flash Tools or via fastboot and start over again
Same problem, I have tried few different twrps since yesterday, same keep bootlooping!! every try after flashed with full Miui firmware from Mi flash, still the same.
okubax said:
@mxpower, this is strictly not true, I have been able to install Pixel Experience ROM straight from the Global ROM V12.0.3.0.QGGMIXM A10 without needing to downgrade first.
I followed this CFW migration guide correctly (method 2) with no bootloops and all working correctly.
@perlene You probably flashed the wrong TWRP version, to be safe, Flash full MIUI firmware from SP Flash Tools or via fastboot and start over again
Click to expand...
Click to collapse
perlene said:
Good Day Everyone Please Help me
How to Install TWRP and Custom rom in redmi note 8 pro eu QGGEUXM android 10
and i already flash the TWRP and custom rom.
but After the restart it is now Bootloop please help me guyz Please...
Click to expand...
Click to collapse
Hi I follow this video,
https://youtu.be/_e-b89KhPIo and install the Android 9 twrp from the link. I did not install any preloader nor lk. only this twrp file. after finish this, reboot to recovery, it show some selection, I select recovery and press volume - buttom, then i boot up to LR twrp recovery. in the LR recovery, disable the AVR at the advance menu, and do a back up in case of lost of IMEI information. that all,
Hope it help to you.
okubax said:
@mxpower, this is strictly not true, I have been able to install Pixel Experience ROM straight from the Global ROM V12.0.3.0.QGGMIXM A10 without needing to downgrade first.
I followed this CFW migration guide correctly (method 2) with no bootloops and all working correctly.
@perlene You probably flashed the wrong TWRP version, to be safe, Flash full MIUI firmware from SP Flash Tools or via fastboot and start over again
Click to expand...
Click to collapse
Kirin_kid said:
Hi I follow this video,
https://youtu.be/_e-b89KhPIo and install the Android 9 twrp from the link. I did not install any preloader nor lk. only this twrp file. after finish this, reboot to recovery, it show some selection, I select recovery and press volume - buttom, then i boot up to LR twrp recovery. in the LR recovery, disable the AVR at the advance menu, and do a back up in case of lost of IMEI information. that all,
Hope it help to you.
Click to expand...
Click to collapse
ok bro ill try this method thanks a lot and i will feedback if what is the result thank you