Related
Hi All this is just a quick tutorial to help you all root your devices, on later firmwares
This 100% works ive done it over and over without any problems. I am currently on october patch latest firmware for my A105FN. As you may know Samsung have now added extra security meaning even if you have already unlocked your bootloader after you patch the firmware with magisk, flash patched firmware and reboot you will be greeted with that dreadfull message, Only official binaries allowed and your device will be locked and wont boot untill you reflash stock firmware again. The below will help get you out of the prenormal kg state, and save's you a 7 days waiting period as we dont have any TWRP available for our device at this time. Also note due to the extra security magisk cant be flashed with the whole firmware no more, as each time you flash the firmware your back at square 1.
Note: You will need 7-zip - google is your freind
1. Download odin: https://odindownloader.com/download/odin3-v3-13-3.
2. download the latest stock firmware for your device via SamMobile
3. Download latest Magisk Manager - https://www.google.co.uk/amp/s/forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445/amp/
4. Flash latest firmware via odin and let device boot up and finish setting up.
5. Grab Your Firmware AP_A105FXXXX.tar.md5 remove the md5 so its a tar file makes it easier to work with. Copy it to your device storage.
6. Install latest magisk manager, and open check advanced settings to make sure recovery is checked, select install image / patch image and select the AP file you put on your device, magisk will patch and save as magisk_patched on your internal storage. Copy this back to your pc and extract it.
7. Download this https://forum.xda-developers.com/attachment.php?attachmentid=4818715&d=1568308074 thanks to @droidzer1 and extract the vbmeta.img.
8. Make a new folder on you pc it's temporary so you know where your files are. From the Ap magisk_patch.tar you extracted, copy the boot.img, recovery.img, and the downloaded vbmeta.img from step 7. And place them in the new folder you created, using your mouse select all 3 and right click select 7-zip add to archive, select tar format and name it magisk.tar.
9. Now we have all the files ready back to your device, if your bootloader is already unlocked skip this step and move to the next. For those that havent unlocked there bootloader go to settings - about phone - Software Information - tap multiple times on "Build number" - This will open developer option.
Now in settings at the end, you will have new option "Developer options" - look for OEM unlocking - Enable it, if the OEM switch is not there proceed to step 10. If it is and you enabled it it might ask you to factory reset if not it will be this way to complete the unlock bootloader.......
switch off your device and reboot to download mode.
To put device in download mode - Press Volume Up & then Press Volume Down (Keep holding both) and connect device to PC with USB cable
When device start to download mode, long press volume up to unlock the bootloader. This will wipe your data and automatically reboot.
10. Remove any account you have on your device go to settings, look for time and date automatic time zones, turn it off and set date back 8 days from now (example 30th today change date to 22nd) restart device. Now go straight back into automatic time zones settings and turn it back on. Again reboot device, when device reboots turn it off. You can now enter download mode and it should say checking instead of prenormal that means you good to go. Those of you that had no OEM switch in developer mode please now check.... if it's there enable it and go back to step 10 unlocking bootloader then proceed to step 11.
11. Open odin and select in the ap tab the magisk.tar you created earlier. Plug in your usb whilst holding vol-up and vol-down together to boot into download, press vol-up to proceed. Press start on odin and soon as it finishes and device reboots and you see the bootloader message hold power and vol-up until into stock recovery, select wipe factory reset then select reboot device, this the same as soon as you see bootloader unlocked message hold power and the vol-up together this time count to 7.... and release. Phone wont boot it will go blackscreen and reboot, dont worry this is normal, again do the exact same at bootloader unlocked msg screen hold power and vol-up count to 7... release, now phone will boot and you can set it up.
Note: you will need to reinstall magisk manager and on 1st open it will ask do to additional setup, let it do its thing, then device will reboot,
Remeber every time your device reboots you will have to do the power and vol-up to boot system with root.
I hope this guide help you and a big thank you to @afaneh92 for his original guide
thnaks man
how do i install twrp?
if it is possible, can i flash GSI?
tttt7hhhhjjjk said:
thnaks man
how do i install twrp?
if it is possible, can i flash GSI?
Click to expand...
Click to collapse
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.
mikeyb123 said:
No the twrp that was made for our device, wont work with new versions of magisk, or any newer firmware we are going to have to wait until the the new kernel source is released by samsung unfortunatly, its impossible to say when or if they do.... so its just root for now.
Click to expand...
Click to collapse
thanks for the fast reply man :good:
I gave up rooting this phone, ended up bootloop 3 times and always has to flash it to get the phone working again
timba123 said:
Any chimeratool tricks for no oem unlocking in developer options? On a102u1
Click to expand...
Click to collapse
no.. chimera tool cant unlock the bl on usa variants
hello Thanks for this method but not working after install again magisk manager , say app magisk is not installed and not root
When I was creating the magisk_patch file with magisk manager go to advanced settings and check recovery mode
is it correct?
Rooting Galaxy A50 Android 9 Pie with TWRP and Magisk ASL3 Firmware for December 1, 2019 Software Update
1. Make sure the bootloader are unlocked, OEM unlock option is grey
2. Enter Download Mode : Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Reboot to bootloader.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
3. Connect to the phone to computer
4. Flashing TWRP_3.3.1_A50_A505_ASK9_MAGISK_PATCHED.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
5. DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
6. Select Wipe -> Format data.
7. Copy multidisabler-samsung-2.2.zip to phone
8. Install multidisabler-samsung-2.2.zip
9. Select Reboot to Recovery
10. Setup the phone
11. Connect the phone to Internet wait for a moment, make sure OEM unlock option is grey
Install Magisk Manager. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device. Done!
Download:
Download Magisk Manager v7.4.0
Download TWRP_3.3.1_A50_A505_ASK9_MAGISK_PATCHED.tar and multidisabler-samsung-2.2.zip
NOTE: If you lost root after restart it, to root it again: enter TWRP recovery and reboot to RECOVERY
Watch this Video:
Works perfectly on ASK9, thanks!
Hi I am on 4ASK1 this would work for me?
JABS_2109 said:
Hi I am on 4ASK1 this would work for me?
Click to expand...
Click to collapse
It may be works, you can try it. I don't test all version of the firmware
I did all
But my device is keep restarting itself
But if i booted to system no problems happened but the root access lost
hammohammo said:
I did all
But my device is keep restarting itself
But if i booted to system no problems happened but the root access lost
Click to expand...
Click to collapse
You have to downgrade magisk to the version 19.3 because the TWRP is patched with magisk 20.1 (unusable version for the a50)
is there a compatible version of TWRP for the new released Android 10 A50 update yet?
Latest recommended firmware for latest update faster: (Updated weekly).https://samfrew.com/model/SM-A715F/region/SEK/
WARNING: You can't downgrade anymore once you flashed U2 update !
You will need:
-Odin v3.14.1
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
-Galaxy A71 Latest USB Driver
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
You want to download latest firmware directly from server? (fast download)
Samfirm 0.4.1 or Frija 1.4.2
https://samfirmtool.com/samfirm-v0-4-1
https://github.com/wssyncmldm/frija/releases
Frija not working ? install both vcredist_x00 for your device !
(Check your windows settings to know which version to install).
(Microsoft Visual C++ 2010 Redistributable Package) and (Microsoft Visual C++ 2008 Redistributable Package)
-https://www.microsoft.com/en-US/download/details.aspx?id=29 (x86) 2008
-https://www.microsoft.com/en-US/download/details.aspx?id=5555 (x86) 2010
-https://www.microsoft.com/en-US/download/details.aspx?id=15336 (64bit) 2008
-https://www.microsoft.com/en-US/download/details.aspx?id=14632 (64bit) 2010
-Open Frija and type in your model (mine is SM-A715F) and your CSC : (mine is LUX).
(All CSC's and models on Samfrew: https://samfrew.com/model/SM-A715F/).
-Download and extract SM-A715XX_1_00000000000000_xxxxxxxxxx_fac.zip
On your device:
If you want to unlock bootloader:
-Go to Settings then to About phone and find your build number.
-Tap on your build number 6 times until you see “You’re now a developer”.
-Go in Developer options > enable OEM unlocking.
-Connect the device to your PC.
-Power off your device with POWER and volume DOWN and directly hold volume UP and DOWN together!
-Device will boot in DOWNLOAD MODE.
-Long press volume UP to unlock the bootloader. This will wipe your data and automatically reboot your device!
If you dont want to unlock bootloader:.
-Download and extract Odin and open it as administrator.
Still in DOWNLOAD MODE:
-Click on BL and select BL_A715FXXXU1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on AP and select AP_A715FXXXU1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5
-Click on CP and select CP_A715FXXXU1AXXX_CP14483800_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_OXM_A715FXOXM1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_OXM_A715FXOXM1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on START and wait for installation, when done you can unplug your device.
ROOTYour KNOX status will be tripped if you follow this tutorial...What's knox ? : https://www.google.com/search?q=samsung+knox+explained
-Download the latest stock firmware for your Samsung Galaxy A71 with Samfirm/Frija app (faster) or Samfrew/Sammobile website (way slower).
https://samfrew.com/model/SM-A715F/
-Extract the SM-A715XX_1_EXAMPLE_0000000000_fac.zip file with 7zip or any other unzipper.
-Copy the (AP_A715XXXXU1XXXX_CL00000000_QB00000000_REV00_user_low_ship_MULTI_CERT_meta_OS10.tar.md5) file and transfer it to your internal storage.
-Download and install Magisk Manager APK https://github.com/topjohnwu/Magisk/releases/download/manager-v7.5.1/MagiskManager-v7.5.1.apk
-Open Magisk Manager and go to Install > Install > Select and Patch a file.
-Navigate through the storage and select the extracted AP file.
The firmware will be patched and will be found in Internal Storage/Download/magisk_patched.tar.
-Transfer the patched file to your PC.
-Turn OFF your device and boot into DOWNLOAD MODE.
-In Odin, click on AP and select the patched tar file, Uncheck “Auto Reboot” and click on Install.
The tool will flash Magisk V20 on your Samsung Galaxy A71.
To boot in recovery or boot the system with Magisk installed:
1. Powering up normally → System without Magisk
2. Power + Volume Up → Bootloader warning → Release all buttons → System with Magisk
3. Power + Volume Up → Bootloader warning → Keep holding volume up → Actual recovery
Discord A series group to help users:
https://discord.gg/xrnrU8k
Don't need to dowload theses files if you don't know their purposes.
A71_EUR_OPEN.pit
https://mega.nz/#!Z1BRVQIZ!j3EkHOBbp7--iUAgZ2T56iBMzZMtKZoh17lphPqugtc
Combination firmwares:
COMBINATION_FAC_FAQ0_A715FXXU1ATA1
https://androidfilehost.com/?fid=4349826312261713325
COMBINATION_FAC_FAQ0_A715FXXU1ATA2
https://androidfilehost.com/?fid=4349826312261713327
Finally a reason to actually buy this phone, thank you
@BK☑️
Thanks for the share, would be appreciated if you can mention how to update over OTA when we have root the phone. Thanks.
Cuvillier said:
@BK
Thanks for the share, would be appreciated if you can mention how to update over OTA when we have root the phone. Thanks.
Click to expand...
Click to collapse
The reason it's not mentionned is simply because we can't, we just need to download latest firmware and patch it with magisk.
topjohnwu stated ( and i tested it myself ) that if we flash the latest OTA it will brick the device, which is logic.
We need to patch the latest firmware with magisk, if we go from a rooted environment to a non rooted it will brick.
I hope i cleared your thoughs.
BK said:
The reason it's not mentionned is simply because we can't, we just need to download latest firmware and patch it with magisk.
topjohnwu stated ( and i tested it myself ) that if we flash the latest OTA it will brick the device, which is logic.
We need to patch the latest firmware with magisk, if we go from a rooted environment to a non rooted it will brick.
I hope i cleared your thoughs.
Click to expand...
Click to collapse
Okay, so let's say if i get new OTA push notification, i download it first online and then i follow your root tutorial to update it with magisk included?
Cuvillier said:
Okay, so let's say if i get new OTA push notification, i download it first online and then i follow your root tutorial to update it with magisk included?
Click to expand...
Click to collapse
exactly, download the needed firmware and extract the AP file and put it in the download folder on your A71 device, then patch it to obtain a magisk_patched.tar file to flash in odin.
BK said:
exactly, download the needed firmware and extract the AP file and put it in the download folder on your A71 device, then patch it to obtain a magisk_patched.tar file to flash in odin.
Click to expand...
Click to collapse
Understood. Do you know if it will be possible to install twrp too ?
Cuvillier said:
Understood. Do you know if it will be possible to install twrp too ?
Click to expand...
Click to collapse
twrp is compatible, ask the developers of theses devices to build twrp for the a71 :
(the Galaxy A71 have the same Soc has theses devices)
(Snapdragon 730).
-Xiaomi Redmi K20
-Samsung Galaxy A80
-Poco X2
-Realme X2
-Oppo Reno 2
-Lenovo Z6
ill ask samsung open source release center to provide the source code for this device. (i'm an A70 user not A71).
edit: the source code will be released later this week.
edit2: source code is released. (18/02/2020)
BK said:
twrp is compatible, ask the developers of theses devices to build twrp for the a71 :
(the Galaxy A71 have the same Soc has theses devices)
(Snapdragon 730).
-Xiaomi Redmi K20
-Samsung Galaxy A80
-Poco X2
-Realme X2
-Oppo Reno 2
-Lenovo Z6
ill ask samsung open source release center to provide the source code for this device. (i'm an A70 user not A71).
edit: the source code will be released later this week.
Click to expand...
Click to collapse
Thanks, and about unlocking bootloader, is there something I should be aware of after that ?
Cuvillier said:
Thanks, and about unlocking bootloader, is there something I should be aware of after that ?
Click to expand...
Click to collapse
just that your knox bit will be tripped (0x1).
BK said:
just that your knox bit will be tripped (0x1).
Click to expand...
Click to collapse
Thank you, and got another question (sorry ), on your booting instructions, you say that to boot using using magisk we need to press vol+ and power, but will that be possible to boot as usual with power button and boot with magisk by default ?
Cuvillier said:
Thank you, and got another question (sorry ), on your booting instructions, you say that to boot using using magisk we need to press vol+ and power, but will that be possible to boot as usual with power button and boot with magisk by default ?
Click to expand...
Click to collapse
once twrp is released yes (if someone port it).
there is another method but that's another story.
BK said:
once twrp is released yes (if someone port it).
there is another method but that's another story.
Click to expand...
Click to collapse
Thanks, and about the root, if i understood, that way we can flash magisk without need to unlock bootloader ?
Cuvillier said:
Thanks, and about the root, if i understood, that way we can flash magisk without need to unlock bootloader ?
Click to expand...
Click to collapse
Nope you didn't understood, you can't root without unlocking bootloader.
It is not working
I downloaded hungarian firmware from frija, copied the AP file to my phone, patched with magisk, copied the patched file to my computer, booted my phone into download mode, flashed the ap file with odin (and yes i unchecked the auto reboot), and after it finished, I pressed the volume down and power button to reboot, and when the screen went off, I quickly changed to volume up and power button and hold until the bootloader warning appeared, and realased all buttons. After it booted, i opened magisk manager and it says magisk is not installed what can i do? ( and yes, I unlocked the bootloader)
Source code is up and can be downloaded on here! :
https://opensource.samsung.com/uploadSearch?searchValue=A715
I've tried rooting several times to no avail, I've unlocked and flashed everything with the patched magisk setup, I'm using the SM-A715F BTU firmware as that's what my phone was beforehand
When i try and do the volume up boot then release at the warning screen it just does a reboot cycle and never boots I have to force it it shut down and boot normally
I cant even restore phone to a point where SafetyNet validates so no Pokemon Go and such
can we unroot and recover the samsung knox?
Cyber Axe said:
I've tried rooting several times to no avail, I've unlocked and flashed everything with the patched magisk setup, I'm using the SM-A715F BTU firmware as that's what my phone was beforehand
When i try and do the volume up boot then release at the warning screen it just does a reboot cycle and never boots I have to force it it shut down and boot normally
I cant even restore phone to a point where SafetyNet validates so no Pokemon Go and such
Click to expand...
Click to collapse
Ok ladies and gentlemen I finally got it working, and here's what I had to do
You'll need to install 7zip or something that handles TARs and LZ4 that you can grab from github it was the second result on google for me
Once you've patched the AP file in Magisk Manager and copy it back to your pc, Open up that tar file and delete all files except recovery.img and vbmeta.img
Then open the original prepatched AP file in 7Zip and extract the boot.img.lz4 then take that file and drag it onto the lz4.exe from the lz4 utilities
you should now have a nice clean uncompressed boot.img, put that back onto the phone and patch it with magisk manager, you should now have magisk_patched.img copy that back to the pc and rename it boot.img and put it in the tar file from earlier so you should have boot.img recovery.img and vbmeta.img
With just these 3 files in the tar you dont have to worry about wiping your data again and it will patch pretty fast
Open up ODIN again and select AP and choose your new tar file and flash it
Then shut down the phone fully and power it on while holding vol up till you get to the warning screen about the unlocked bootloader let go of vol up and press power to continue and you should find that it boots properly now and magisk manager will show that magisk is installed.
Assalom-o-Alaikum!
How to Root and Flash TWRP on Samsung Galaxy A51 One UI 2.5 Android 10 CTJ1 Build number- Android security patch level: 1 October 2020. It may be work for SM-A515F, SM-A515F/DSN, SM-A515F/DS, SM-A515F/DST, SM-A515F/DSM, SM-A515F/N, SM-A515U, SM-A515U1, SM-A515W, PLEASE LET ME KNOW IF IT WORKED. This TWRP version is 3.5.0_10-1 developed and brought to you by [email protected] senior developer. You need installed TWRP for rooting or installing custom rom. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Downloads
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Make sure the bootloader are unlocked.
Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
Download and Install Samsung Mobile Phone Drivers
Download Latest Magisk and Magisk Manager
Download twrp-a51-3.5.0_10-1_ianmacd.tar
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Flashing TWRP on Galaxy A51 CTJ1 firmware Android 10 Q :
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing twrp-a51-3.5.0_10-1_ianmacd.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – select Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Select Wipe -> Format data, type ‘yes’ and confirm
Select Reboot to System
Setup the phone, Done!
Rooting Instructions
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Install Magisk Magisk-v21.2.zip or latest
Select Reboot to System
Connect the Phone to Internet
Open Magisk Manager ( If you can not see it, just wait for a moment)
Done! You can use Root Checker to check it, Enjoy!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again.
Notes / Warning!
Use at your own risk, I’m not responsible for bricking your device.
Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
If your device storage is encrypted, Rooting will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
Make sure to backup your important data before root it.
Video Link:
Credit:
1. @ianmacd
2. @redymedan
Mohd Masab said:
Assalom-o-Alaikum!
How to Root and Flash TWRP on Samsung Galaxy A51 One UI 2.5 Android 10 CTJ1 Build number- Android security patch level: 1 October 2020. It may be work for SM-A515F, SM-A515F/DSN, SM-A515F/DS, SM-A515F/DST, SM-A515F/DSM, SM-A515F/N, SM-A515U, SM-A515U1, SM-A515W, PLEASE LET ME KNOW IF IT WORKED. This TWRP version is 3.5.0_10-1 developed and brought to you by [email protected] senior developer. You need installed TWRP for rooting or installing custom rom. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Downloads
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock and USB debugging options ( Settings -> Developer options )
Make sure the bootloader are unlocked.
Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
Download and Install Samsung Mobile Phone Drivers
Download Latest Magisk and Magisk Manager
Download twrp-a51-3.5.0_10-1_ianmacd.tar
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Flashing TWRP on Galaxy A51 CTJ1 firmware Android 10 Q :
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing twrp-a51-3.5.0_10-1_ianmacd.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – select Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip Swipe to confirm Flash
Select Reboot to Recovery
Select Wipe -> Format data, type ‘yes’ and confirm
Select Reboot to System
Setup the phone, Done!
Rooting Instructions
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Install Magisk Magisk-v21.2.zip or latest
Select Reboot to System
Connect the Phone to Internet
Open Magisk Manager ( If you can not see it, just wait for a moment)
Done! You can use Root Checker to check it, Enjoy!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again.
Notes / Warning!
Use at your own risk, I’m not responsible for bricking your device.
Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
If your device storage is encrypted, Rooting will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
Make sure to backup your important data before root it.
Credit:
1. [email protected]
2. Recovery-Mode
Click to expand...
Click to collapse
Keep up to making the next tutorial on Galaxy A51
Hello
Mohd Masab
It's my first Samsung .I had 4-5 Sony ,easy to root ,a Doogee S90 (NEVER BUY THAT !).
Is your method safe ,have U seen bad effects ,what fonctions did U lost ?
Bye .
Fred
Okay, so I completed the whole process, here are my observations:
The method provided above almost works. The problem is, that everytime you reboot to system when you are not rooted, TWRP will encrypt your files. So the solution is, that you have to format data and then install dm_verity and Magisk after each other, without a reboot! After that, you can boot to your system and set up your phone.
hargitomi said:
Okay, so I completed the whole process, here are my observations:
The method provided above almost works. The problem is, that everytime you reboot to system when you are not rooted, TWRP will encrypt your files. So the solution is, that you have to format data and then install dm_verity and Magisk after each other, without a reboot! After that, you can boot to your system and set up your phone.
Click to expand...
Click to collapse
I did what you said but still encrypts after reboot. Latest Magisk.
Hi, I am having problems with internal storage, I can not create folders and there are applications that I can not download, any solution?
Could someone tell me if it is compatible with the November update CTK1?
I have managed to root the phone, you can install everything and configure it, but after turning off the phone, I can't start it does bootloop, and it returns to the prompt "The phone is not running Smasung official software ..." never finishes starting? What do you recommend me to do?
020221
I reloaded the original rom and did the procedure again, taking into account the clarification of installing install dm_verity and Magisk after each other, without a reboot, and everything went well!
Hello abraxasboot !
So,for you ,the only problem was that U had to flash the files one after the other without rebooting ?
No other problem since that ?
Is the phone reacting well ?
Where did U find the official rom ?
Thanks and have a good day !
It worked for me but i can't access themes and other system apps
Is there any solution to access themes on rooted a51
Everything working well for me, thanks !
For ameer419 ,maybe try to flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip after EACH other thing U flash in TWRP ...
Good luck !
Hello everybody !
Bootloop til this morning ,maybe my fault :I erased system apps such as Facebook ,Youtube ...nothing very important .
I tried to start the procedure at the begining ,it doesn't work ...
Any idea from anyone ?
Thanks .
fleafred said:
Hello abraxasboot !
So,for you ,the only problem was that U had to flash the files one after the other without rebooting ?
No other problem since that ?
Is the phone reacting well ?
Where did U find the official rom ?
Thanks and have a good day !
Click to expand...
Click to collapse
How are you fleafred, https://samfrew.com/es/model/SM-A515F/ here you will find the original rom. I did the procedure again and had no more problems.
Cool ,I couldn't find it!
Just have to wait for 9h now ...
Thanks a lot ,abraxasboot ,I'll tell u.
Have a nice day .
It worked !
Ouf !Thanks a lot ...
I could re-install Magisk ,Xposed ...
I'd have like to know what I desinstalled to do that ...
Have a nice day .
Thank you very much, brother. You did the perfect way
== important ==
I was unable to flash and reboot into TWRP recovery after applying the official Samsung update from March, which updates Android from 10 to 11. Reboot into recovery would not work and I would always end in a boot loop.
I had to downgrade to Samsung's official Android 10 and used the binaries from January for that: https://samfrew.com/es/model/SM-A515F
After that, flashed TWRP again and was able to boot into recovery right away as it should be
If I follow the steps and flash twrp-a51-3.5.0_10-1_ianmacd.tar file using Odin I get an message:
'Only official release binaries are allowed to be flashed (RECOVERY)
The phone was recently purchased from Samsung official store, and has android 10 official firmware from feb 1st installed
Any clue please?
hey guys i used a lyf wind 1 to flash lineage os using twrp ..... so i wiped the previous os and unknowingly flashed another unsupported version of twrp ...when entering to recovery menu its all blank .... now i have no os and recovery ...... i couldnt flash stock rom because my device is not recognised as qualcomm port .............
pls any help ????
I have a working 11R twrp and all the DRM passers mejestics etc. to run.. you can boot the os after that that is the standard Samsung OS. np u can install LINAGE os 18.1 Andys march release, the Mejestics meaning u can patch root without Needing to part the orignal Firm and copy boot.img over. etc
Here is Link With GSI as Well and 2.5 GUI Twrp working and UI3.0
Google Drive: Sign-in
antuanix46 said:
If I follow the steps and flash twrp-a51-3.5.0_10-1_ianmacd.tar file using Odin I get an message:
'Only official release binaries are allowed to be flashed (RECOVERY)
The phone was recently purchased from Samsung official store, and has android 10 official firmware from feb 1st installed
Any clue please?
Click to expand...
Click to collapse
All good in the end, I needed to install samsung's firmware in odin first
Thank you for the good work
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
This method from @MarvinMod works on Android 11 (i have Android 11 with root):
Root stock android 10 with TWRP and Magisk-
1- With the device off, hold vol up and power till the device turns on. in stock recovery, choose wipe and factory reset. Then reboot. setup using wifi or data and skip as much as possible. open developer options and make sure oem unlock is checked and power off the device.
2- Hold vol up and vol down while plugging device into PC. on the bootloader splash screen, hit vol up to enter download mode.
3- Open odin and uncheck auto reboot in the options tab. Click AP, then add Recovery.tar and click start. You should get a green pass in odin when complete. this next step is tricky so pay attention.
4- Remove the cable then Hold vol down and power till the device screen goes blank, as soon as it does immediately release all keys then press and hold vol up till the warning about unlocked bootloader appears. TWRP should boot.
5- Copy DFE to external sdcard. In Twrp click install, select storage, choose micro sd and then choose DFE then slide right to confirm and install. when complete, go back to the main screen in TWRP.
6- Click wipe, click format data, type yes and click the blue check box in lower right corner. back out and click reboot, click system, click do not install.
7-Setup device as you normally would and make sure to enable dev options. now turn off the device and boot into twrp. (vol up and power till bootloader warning.)
8- Copy Magisk to sdcard, In Twrp click install and choose Magisk, slide right to confirm, Magisk will now install.
9- Click reboot system and choose do not install. The device will reboot and you should now have Magisk in your apps, make sure to update it. If its not there, wait a few minutes and it should pop up.
Congrats, you should now have TWRP and Magisk on rooted stock rom android 10.
kac222 said:
This method from @MarvinMod works on Android 11 (i have Android 11 with root):
Root stock android 10 with TWRP and Magisk-
1- With the device off, hold vol up and power till the device turns on. in stock recovery, choose wipe and factory reset. Then reboot. setup using wifi or data and skip as much as possible. open developer options and make sure oem unlock is checked and power off the device.
2- Hold vol up and vol down while plugging device into PC. on the bootloader splash screen, hit vol up to enter download mode.
3- Open odin and uncheck auto reboot in the options tab. Click AP, then add Recovery.tar and click start. You should get a green pass in odin when complete. this next step is tricky so pay attention.
4- Remove the cable then Hold vol down and power till the device screen goes blank, as soon as it does immediately release all keys then press and hold vol up till the warning about unlocked bootloader appears. TWRP should boot.
5- Copy DFE to external sdcard. In Twrp click install, select storage, choose micro sd and then choose DFE then slide right to confirm and install. when complete, go back to the main screen in TWRP.
6- Click wipe, click format data, type yes and click the blue check box in lower right corner. back out and click reboot, click system, click do not install.
7-Setup device as you normally would and make sure to enable dev options. now turn off the device and boot into twrp. (vol up and power till bootloader warning.)
8- Copy Magisk to sdcard, In Twrp click install and choose Magisk, slide right to confirm, Magisk will now install.
9- Click reboot system and choose do not install. The device will reboot and you should now have Magisk in your apps, make sure to update it. If its not there, wait a few minutes and it should pop up.
Congrats, you should now have TWRP and Magisk on rooted stock rom android 10.
Click to expand...
Click to collapse
alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
Dont forget to format data
alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
Here is your fix. Click link and follow instructions to access twrp on Android 11.
Post in thread 'MarvinMods Galaxy A70 Guide. Root, Los 17.1/18.1, Magisk, Stock O.S. Android 10.' https://forum.xda-developers.com/t/...sk-stock-o-s-android-10.4100655/post-84754781
alanz0r said:
Any process step by step about how to install TWRP and MAGISK in Galaxy A70 with android 11 (OneUi 3.1)?
I've tryed with the same files and method that i have done with the Android 10 (OneUi 2.5 version) and i can't start in twrp to flash Magisk
And with the metod of install via Odin without Magisk give's me a bootloop
Anyone knows about this process and can help me please?
Click to expand...
Click to collapse
I have successfully rooted OneUI 3.1 and flashed it on CTK5 firmware (it was suppose for Android 10)
No more crap recovery boot combination
Real great
JakunTech1010 said:
I have successfully rooted OneUI 3.1 and flashed it on CTK5 firmware (it was suppose for Android 10)
No more crap recovery boot combination
Real great
Click to expand...
Click to collapse
So now you don't need to put the USB cable to start twrp?