{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Xperia XZ Premium [Maple]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
Known issues
Test and Tell
DON'T FLASH GAPPS, ALREADY INCLUDED
See POST #
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 10.0.0_r35
Security patch level: May 2020
Build author/Device Maintainer: Shujath
Kernel Source: https://github.com/Yoshino-StockDevelopment
Source code: https://github.com/PixelExperience
ROM Developer: Shujath
XDA:DevDB Information
AOSP Pixel Experience for Xperia XZ PRemium, ROM for the Sony Xperia XZ Premium
Contributors
Shujath, modpunk, derf elot
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: 47.2.A.10.107
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1
Created 2020-05-22
Last Updated 2020-05-22
Instructions :
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
Install Latest Firmware
Grab the Sony Stock firmware using e.g. XPeriFrim. You should always flash the firmware matching the LOS build.
Grab newflasher and put it in the same folder as the firmware files.
Read the newflasher original post on XDA for general instructions!
Remove the following from the folder so they won't get flashed:
all *.ta files (keep the one in the boot/ directory)
Turn off your phone
Hold the volume down button and attach it via USB to your system till you see LED turning green
Run newflasher from within this directory to flash the remaining files
Skip the second optional step (dumping of trim area), it's useless if your bootloader is unlocked already and takes a long time.
Hit Yes for all the next questions asked in Newflasher(Only dumpin of trim area should be selected no and rest all questions should be selected as yes.
Once Newflasher flashes the Stock rom, boot into it and make sure volte is available.(VOLTE WILL NOT WORK ON BLISS IF YOU DO NOT HAVE IT IN STOCK ROM.
Incase you are not able to see volte icon in stock either your carrier does not support it or there is an issue with the stock rom(Try flashing it again).
Once you confirm Volte is available in stock, Flash the TWRP recovery and follow below instructions carefully.
Boot into recovery >> Format Data >> Power off the Phone.
Again boot into recovery >> Format Data >> Power off the Phone.
This time boot into recovery >> Wipe Internal Storage.
Flash ROM, Gapps, Magisk.
In the setup wizard select SIM 1 as the default sim for calls data and message.
Once Boot is complete, wait patiently for few mins.
Gto *#*#4363#*#* >> Phone Information >> IMS status.
Voilllaa you should have volte and dual sim both enabled.
Google Apps
Gapps are already included in the ROM and no need to flash it again.
FEATURES AND ISSUES
Code:
- Boot: Ok
- Bluetooth: Ok
- WiFi: Ok
- WiFi Hotspot: Ok
- RIL - Phone - Data: Ok
- VoLTE: Ok
- GPS: Partially OK(Working with carrier network)
- Camera: Ok (SONY Stock Camera)
- Camcorder: Ok (SONY Stock Camera)
- Lights: Ok
- MicroSD: Ok
- Accelerometer: Ok
- Compass: Ok
- Gyroscope: Ok
- QTI sensors: Ok
- Touchscreen: Ok
- FM Radio: NA
- Fingerprint: Ok
- Vibrator: Ok
- Microphone: Ok
- Audio & music: Ok
- Bluetooth audio: Ok
- NFC: Ok(Need Testing)
- Kernel: Ok
- Graphics: Ok
- 3D Rendering: Ok
- Clock: Ok
- Offline Charging: Ok
- USB: Ok
- USB OTG: (Need Testing)
- Encryption: Broken
- Live Display (Profile changing on Reboot)
- SEPolicies: Enforcing
[/SIZE]
Known Issues
Please test and reply
Changelog :
22nd May'2020 : Initial Release.
Added stock cam and sony Music
Bugs :
- Vendor mismatch for Single sim users.
- SIM detection takes upto 3 mins for Dual SIM users.
- Volte not working.
Link : https://www.androidfilehost.com/?w=files&flid=312750
2nd June 2020 :
* Enabled VoLTE
* Dual SIM Fixed
* Vendor Mismatch error at boot fixed.
* Enabled most of the carriers in the world who support VoLTE.
* Kernel up streamed.
* Many other upstream changes from PE.
* Various other bug fixes.
https://www.androidfilehost.com/?fid=4349826312261824101
12th June 2020
Changelog :
* Bumped June's Security Update
* Migrated from Pixel Experience >> Pixel Experience PLUS Edition
* SafetyNet passes out of the box.
Download link : https://www.androidfilehost.com/?fid=8889791610682868582
17th August 2020 :
Changelog :
* Updated thermals for Fast Charging
Managed to get RIL and Volte working wihtout
* Modem Switcher
* Customization Selector
* Modem Customization
* Fixed Random loss of Network on both Single and Dual SIM.
* Fixed Maps Crash, Huge thanks to @rcmiku
* Added Xperia Album thanks to @
* Removed Unncessary volte props causing crashes on the system.
* Satery net still passing out of the box
* Removed unused Symlinks for Adreno.
* Downgraded android.hardware.gnss to 1.0
* Upgraded display vendor vendor.display.config to 1.9
* Added GNSS packages in try to fix offline GPS.
* Added CNE packages for better connectivity.
* Added IWlanService for VoWifi(Still not working)
* Added NXP hal for NFC
* Addressed CND Denails.
* Fixed Android Debugging
- Fixed Stock Camera memory Leak (Thanks to @ )
- Completely disabled Doze which was causing UI crashes
* Unified Device Trees (Device will get props accordingly)
* Fixed data issue on single SIM devices(No need to toggle WiFI)
* Removed Vulkan rendering which was causing Blank screen on various apps.
* Added Sony Stock Movie Creator App
* Removed buggy DT2W
* Added Xperia Email and Xperia Keyboard.
Download Link : https://www.androidfilehost.com/?fid=8889791610682916825
08th Dec'2020
ROM UPDATE : Thanks to @No1Alien for compiling the ROM.
* Compiled with latest source and security patches.
* Kernel Upstream.
Download : https://androidfilehost.com/?fid=10763459528675599243
EOL
Kernel version ?
SilverGamer_YT said:
Kernel version ?
Click to expand...
Click to collapse
4.4.218
Thank you
This is the Pixel Experience or the Pixel Experience Plus edition?
Diego0007 said:
This is the Pixel Experience or the Pixel Experience Plus edition?
Click to expand...
Click to collapse
Read the title
Is dual card normal?
Is the SIM card reading speed normal?
I used the following version before and found that reading the SIM is very slow, more than 5 minutes, and the signal is a bit poor.
https://forum.xda-developers.com/xz-premium/development/rom-pixel-experience-plus-edition-t4088483
sunday01 said:
Is dual card normal?
Is the SIM card reading speed normal?
I used the following version before and found that reading the SIM is very slow, more than 5 minutes, and the signal is a bit poor.
https://forum.xda-developers.com/xz-premium/development/rom-pixel-experience-plus-edition-t4088483
Click to expand...
Click to collapse
True, since I'm using the XZP as first phone, that's essential for me... Didn't try this new ROM yet but signal reception in the rcmiku Pixel Experience one was very poor... Except that, most stuff works fine... But you know, if you have an emergency you can't wait 5 or more minutes for the signal to kick in
Any feedback on SIM card reading in this ROM?
sunday01 said:
Is dual card normal?
Is the SIM card reading speed normal?
I used the following version before and found that reading the SIM is very slow, more than 5 minutes, and the signal is a bit poor.
https://forum.xda-developers.com/xz-premium/development/rom-pixel-experience-plus-edition-t4088483
Click to expand...
Click to collapse
Jujub said:
True, since I'm using the XZP as first phone, that's essential for me... Didn't try this new ROM yet but signal reception in the rcmiku Pixel Experience one was very poor... Except that, most stuff works fine... But you know, if you have an emergency you can't wait 5 or more minutes for the signal to kick in
Any feedback on SIM card reading in this ROM?
Click to expand...
Click to collapse
For Dual sim users its taking about 2-5 mins for sim detection and second sim is not getting detected for.
Till now I have not experienced any network issues, as this uses the same source as Bliss there should not be any issue with signal reception.
Stock camera continued FC
Hi shujath, can you include the " plus edition" i. The future soon..also i have question, is it "okay" if i dont remove any files from the firmware before i fladh it with newflasher?? Because i like to clean flash for my phone..thank you sir for maintaining alot of roms... Damn i cant imagine how difficult it was to maintain the stability and improving the rom at the same time.. thats really alot of time.. but overall good job sir really good work..thank you
I can't install larom, when installing everything in the boot it asks me for a password, help please
Guetto Design said:
I can't install larom, when installing everything in the boot it asks me for a password, help please
Click to expand...
Click to collapse
Format data
Volte not working？
Brilliant work!
Thanks for ur working !!
minuitsun said:
Volte not working？
Click to expand...
Click to collapse
Added volte support to Bliss
Will b adding here later next week
Shujath said:
Added volte support to Bliss
Will b adding here later next week
Click to expand...
Click to collapse
Wow, great！Thank you for your contribution。
Only the dual version (G1842) appears in the download, can it be installed in the normal version (G1841)?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo) which is designed to increase performance and reliability over stock Android for your device. All the source code for LineageOS is available in the LineageOS GitHub repo and if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Official LineageOS website
Official LineageOS changelogs
About the LineageOS 15.1 features
Downloads Links
GDrive
Google Applications (optional) :
OpenGapps (Use packages for ARM64, Android 8.1.x, Micro)
Information : Flash the GApps before the first boot. If not, a clean flash is recommended.
Audio Workaround for ZE601KL (Not Officially Supported) Users by Superbezo: Mega | AFH
Flashing and updating
LineageOS clean install :
- Flash the LineageOS ROM zip from recovery
- (Optional) Flash a GApps package to have the Google Applications
- (Optional) Every additional zip you want to flash
- Wipe the dalvik & cache
- Reboot
LineageOS addonsu for root access :
- (Download) Download the addonsu for arm64
- (Optional) Flash the zip on a working Lineage installation (once)
- (Information) Upon ROM updates, the addonsu is preserved
- Reboot
About the builds
- Device Side Sources are here.
Issues and reports
- Report issues only if you use the ROM kernel
- If an additional mod is installed, make sure it's unrelated, and mention it
- Make sure the issue wasn't discussed earlier in the threads
- Share a log of the error
LineageOS available for Z00L/T also thanks to :
- LuK1337
- Google AOSP
- The LineageOS Team
- CodeAurora Forums
- The CyanogenMod Team
XDA:DevDB Information
LineageOS-15.1, ROM for the Zenfone 2 Laser
Contributors
TheImpulson
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: 15.1
Stable Release Date: 2018-03-31
Created 2018-03-31
Last Updated 2019-01-09
FEATURES AND ISSUES
Code:
- Boot : Ok
- GApps : OpenGApps Micro recommended
- Partitions (Data) : Ext4 and F2FS supported
- Bluetooth : Ok
- WiFi : Ok
- WiFi Hotspot : Ok
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Ok
- LED Lights : Ok
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- AOSP sensors : Ok
- Touchscreen : Ok
- FM Radio : Ok
- Vibrator : Ok
- Microphone : Ok
- Audio & music : Ok
- Bluetooth audio : Ok
- Kernel : Ok
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- DRM : Ok
- Offline Charging : Ok
- USB : Ok
- USB OTG : Ok
- Encryption : Ok
- SEPolicies : Enforcing
Changelogs:
Code:
[B]20180625[/B]
[B]Device Changes:[/B]
- Shorten wait time to optimize shutdown time
- Shorten wait time for services exit to optimize shutdown time
- Disable SystemUI anti-falsing on the lock screen
- Build text classifier's smart selection
- Use sched_fifo for render thread and activity manager
- Inform Trust about legacy encryption support
- Disable QS panel transparency
- Switch to unified fstab
- Use sdfat instead of vfat
- Use sdfat for exfat (Asus used to ship native exfat module with stock)
- Move device dependent modules to /vendor
[B]Kernel Changes:[/B]
- Import sdfat & port to 3.10
- Regenerate defconfigs
- Fix "hide su" patch for 3.10
[B]Vendor Changes:[/B]
- Hexedit GPS blobs to load config files from the vendor
Other Lineage OS-15.1 specific changes up to 25/06/2018
[B]20180615[/B]
- Disabled display transformation support to fix lags during live display.
- Replaced current GPS configs with stock configs to fix location issues.
- Implemented a dummy qti-telephony-service to enable SIM card to enable/disable options (Might be buggy).
- Implemented ZenfoneDoze (Might consume more battery if enabled).
- Added vendor security patch level for Trust
- Updated bspcapability string and added permissions to fix Pixel master camera support.
[B]20180606[/B]
- Removed HWC2 Support & binderized Live display
- Imported GPS configs from klte-common
- Enabled Internal Storage view by default in File Manager
[B]20180531[/B]
- Removed Shutdown timeout to fix buggy reboot options
- Binderized Live display and added overlay for HWC
- Updated extract and makefile scripts
- Enabled Automatic brightness and disabled Bluetooth on first boot.
- Added location overlay
- Removed deprecated Snap camera overlay
- Other Lineage OS related changes
[B]20180526/27[/B]
- Added back btnvtool to fix Bluetooth MAC address. Thanks to @AmolAmrit
- Reverted back to OSS liblight to fix notification LED
- Removed ZuK Doze for now
- Fix a bunch of SELinux denials
- Other Lineage OS specific changes [URL="https://lineageos.org/Changelog-18/"]here[/URL]
[B]20180520[/B]
- Fixed more audio related SELinux Denials
- Added Advance Doze options ported from ZuK Devices
- Updated F2FS
Another Reserve
cant wait releases for z00t, many thanks devs !!!
Is the ROM smooth and reliable
Is there any issues that are very complex and deal breakers
No words can express how much I'm thankful for continuous work with this device! I will try and flash this soon.
Nova Sangeeth said:
Is there any issues that are very complex and deal breakers
Click to expand...
Click to collapse
Check 2nd post
Owh god you are awesome man..... I am very much happy now
This phone is not complete with out this rom. Thank you dev.
Pushed Z00T build.
TheImpulson said:
Pushed Z00T build.
Click to expand...
Click to collapse
will try soon thank you:good:
Hello and thank you for your work. Can you please tell, will you become Z00T maintainer for Lineage OS, or are these builds completely unofficial (I mean without further possibility to go official 15.1 build) and we better stick to AEX 5.X?
Also can you tell, are there any differences between your build and Luke's last one, apart from Fire Kernel?
casper_wh said:
Hello and thank you for your work. Can you please tell, will you become Z00T maintainer for Lineage OS, or are these builds completely unofficial (I mean without further possibility to go official 15.1 build) and we better stick to AEX 5.X?
Also can you tell, are there any differences between your build and Luke's last one, apart from Fire Kernel?
Click to expand...
Click to collapse
I doubt it will become official ever first of all. All HAL1 devices are not yet official due to camera issues and will probably won't. Apart from FireKernel difference is that I compiled it using SDCLANG, did some updates for GPS, and other files, Disabled transparent QS and fixed video recording partially by importing commits from xperia devices. Nothing more.
TheImpulson said:
I doubt it will become official ever first of all. All HAL1 devices are not yet official due to camera issues and will probably won't. Apart from FireKernel difference is that I compiled it using SDCLANG, did some updates for GPS, and other files, Disabled transparent QS and fixed video recording partially by importing commits from xperia devices. Nothing more.
Click to expand...
Click to collapse
Ok, thank you for your answer. Do I understand correctly that all the LOS 15.1 changes for the past month also included, I mean, is it based on the last builds, right?
casper_wh said:
Ok, thank you for your answer. Do I understand correctly that all the LOS 15.1 changes for the past month also included, I mean, is it based on the last builds, right?
Click to expand...
Click to collapse
I synced yesterday and compiled. So, yes all changes by lineageOS till yesterday are there.
TheImpulson said:
I synced yesterday and compiled. So, yes all changes by lineageOS till yesterday are there.
Click to expand...
Click to collapse
Great to hear that, downloading the ROM
TheImpulson said:
I doubt it will become official ever first of all. All HAL1 devices are not yet official due to camera issues and will probably won't. Apart from FireKernel difference is that I compiled it using SDCLANG, did some updates for GPS, and other files, Disabled transparent QS and fixed video recording partially by importing commits from xperia devices. Nothing more.
Click to expand...
Click to collapse
So kind of you , I will wait for official one
TheImpulson said:
I doubt it will become official ever first of all. All HAL1 devices are not yet official due to camera issues and will probably won't. Apart from FireKernel difference is that I compiled it using SDCLANG, did some updates for GPS, and other files, Disabled transparent QS and fixed video recording partially by importing commits from xperia devices. Nothing more.
Click to expand...
Click to collapse
Hi @TheImpulson I read on one of the other threads that the video recording bug was completely fixed. AEX if I'm not wrong. I hope I'm not mistaken. If it is fixed, is there a chance of it becoming official?
Whiskeym said:
Hi @TheImpulson I read on one of the other threads that the video recording bug was completely fixed. AEX if I'm not wrong. I hope I'm not mistaken. If it is fixed, is there a chance of it becoming official?
Click to expand...
Click to collapse
Let's see. All there left is a green line to be fixed and if it does, I will apply for official tag.
AospExtended ROM for XZ1 Compact
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AEX for android 10 you can find HERE
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
IMPORTANT: Make sure you have an unlock Bootloader
Please if you have Locked Bootloader you may check this http://developer.sonymobile.com/unlockbootloader/
Code:
WORKING
- RIL
- Mic
- Sound (Speaker and Headset)
- LED
- Thermal Manager
- Audio and Video Decoders/Encoders
- Camera
Code:
BUGS
- Not finding
- Post in this thread
Code:
HOW-TO INSTALL
- You need have stock ROM 47.2.A.11.228
- Download ROM zip
- Download Gapps zip
- Copy to your phone
- Enter to custom recovery and make format (not wipe) data
- Install ROM & Gapps
- Turn off your phone & then on
- First time phone restart itself this is normal
Code:
ADD. INFO
- If you want right bootanimation then delete bootanimation.zip on path /oem/media/
- Sim detect ~30 sec.
- [B]Kernel already pre-rooted and have force permissive mode[/B]
Code:
[B]DOWNLOAD
[URL="https://drive.google.com/open?id=1K5-KNGQkPpL5VEUpXY0yqubd8ZLGya6O"]HERE[/URL][/B]
XDA:DevDB Information
[Treble/Pie/XZ1c], ROM for the Sony Xperia XZ1 Compact
Contributors
russel5, phhusson, ishubhamsingh, AEX & Treble team
Source Code: https://github.com/phhusson/treble_experimentations
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: 47.2.A.11.228
Version Information
Status: Beta
Current Beta Version: 12
Beta Release Date: 2019-08-09
Created 2019-04-14
Last Updated 2019-10-18
v1:
- initial release
v2:
- fix bluetooth audio
- create overlay app with parameters from stock framework-res
- added some stock info to build.prop
v3:
- aex 6.5
- firmware 47.2.A.10.45
- kernel updated to ^^ version
- kernel pre-rooted with latest magisk
v4:
- security patch 05.19
- some minor fixes
v5:
- fix bug with sim card when phone rebooted after lose it
- added libaptX, libaptXHD and some stock libs
v6:
- make enabled 'reboot to recovery' from power menu
- make enabled camera button for camera app
- livedisplay function (added official by AEX team)
v7:
- base 47.2.A.10.62
- security patch
- turn back AOD
- pocket detection (official by AEX team)
v8:
- AEX v6.6
- low performance issue fixed
- increase min_big_cpu_online to 2 (like on stock)
v9:
- 47.2.A.10.80 base
- security patch
- some sources update
v10:
- fix white text on white background on black theme in some apps (at last)
- change Gallery to Lineage source (make video playback more useful)
- change music player to Lineage's Eleven
- make possible delete files from SD card by gallery and music apps
v10_fix:
- fix bootloop when using stock camera module
v11:
- AEX 6.7
- security patch
- some sources fix
- base firmware 47.2.A.10.107
v12:
- security patch
- some sources fix
v13
- base 11.228
- security patch (like new script work you will see September security patch = 11.228 version)
- new script that made your phone like a stock (for safetynet)
- no need module anymore, stock sony camera is in a ROM
- wireguard update to latest version
v14
- seems VoLTE is working now, try and feedback
v15
- fix bug when another users can't get access to memory
- fix camera button
- removed build-in camera, now only sony stock camera in the rom
- fix 'ok google'
Magisk modules
* with Sony stock camera --> HERE
* wireguard --> HERE
Thanks, works great so far! Raw capture/gcam doesn't seem to work though. Is this possible to fix?
I believe this Rom uses stock vendor, raw only works with oem vendor
Sent from my G8441 using Tapatalk
Mara-X said:
Thanks, works great so far! Raw capture/gcam doesn't seem to work though. Is this possible to fix?
Click to expand...
Click to collapse
Nope, as @Wyzco say, this rom used stock vendor blobs, but it's working very well so far.
Thread updated
See post #2
My adaptive brightness was lost last night. No option for it in settings>display. The thing at the end of quick settings slider also does nothing. Otherwise no probs after 1 day.
Also some settings like handwave gesture dont do anything but are probably there as remnants or for future use?
E: Might have something to do with me fiddling with nightlight settings. Will try to see if thats the case when i have the time
Just curious if there is a Ambient Display option in this Rom/build?
EscoP said:
My adaptive brightness was lost last night. No option for it in settings>display. The thing at the end of quick settings slider also does nothing. Otherwise no probs after 1 day.
Also some settings like handwave gesture dont do anything but are probably there as remnants or for future use?
E: Might have something to do with me fiddling with nightlight settings. Will try to see if thats the case when i have the time
Click to expand...
Click to collapse
Hi, how is the battery life so far? How long does it last when fully charged?
Something like this. Works 24 hours, display 4:47
Thanks man ? Am I the only one who has double battery life on Oreo? Any reasons why it dropped so much in PIE?
I used both Oreo and Pie, but went back to Oreo because of that (for one reason) I hope that this changes one day.
Has all of the random reboots from AOSP pie finally been fixed, or is this still present in this?
Thanks!
DerSteppo said:
Thanks man Am I the only one who has double battery life on Oreo? Any reasons why it dropped so much in PIE?
I used both Oreo and Pie, but went back to Oreo because of that (for one reason) I hope that this changes one day.
Click to expand...
Click to collapse
Don't forget that i'm still have 47% of battery with 1 day and 4:47 sot
Kofoedsan said:
Has all of the random reboots from AOSP pie finally been fixed, or is this still present in this?
Thanks!
Click to expand...
Click to collapse
This ROM don't have this problem.
russel5 said:
This ROM don't have this problem.
Click to expand...
Click to collapse
That is great. I thought all AOSP based ROM had the problem though. But great to hear it, gonna give it a shot later today as I used to really like the Extended Oreo.
Thanks for your hard work, it is much appreciated.
EDIT: On AOSP Pie with Sony OEM the fingerscanner is always on, meaning if you place your finger on the scanner it will wake up. Even without pressing the power button.
Is it possible to port this feature to this rom?
Thanks in advance.
russel5 said:
Don't forget that i'm still have 47% of battery with 1 day and 4:47 sot
Click to expand...
Click to collapse
Ah yes, I did not see your status bar on my screen in the first place. I guess I will give it a shot, thanks! :good:
Are you using Google Pay by any change?
Yes, with magiskhideprops module works perfect
AMAZING!!!
WHAT A COOL ROM!!! Thanks you very much, it is incredibly: fast, clean, good-looking... Much better than Sony's ROM. Still, if I may, there are some things I think it would be great to include/improve:
- Camera app is VERY simple, and does not allow to use specific characteristics of the Xperia XZ1 Compact like slow motion or "wide" photos on front camera.
- Camera button isn't use!! You can't do pictures neither accés to the camera fast. Also, it would be great if you could personalize the button(s) the way you want!
- Sony's ROM have a very useful functionality that allows to change the screen between three modes: realistic, saturated... Please, include that, I can't live without an OLED like (saturated) display XD
- Keep updatiiiiing
Again, thanks you, I wasn't very convinced to install it but now I won't go back
Thread updated. See post #2
How to update:
* download latest firmware 47.2.A.10.45 for newflasher
* delete system.sin, userdata.sin, fotakernel.sin
* flash your phone
* turn it off
* enter to recovery and flash new aex rom
cooooooooooooool!
really cool!
<!---This is a forum post template for manitainers to use on XDA, or whatever forum you post your build(s) on. You can copy/paste what is here and edit as necessary for your purposes-->
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
step 1 : Flash Stock ROM
step 2 : Flash Recovery in Fastboot
step 3 : Flash ROM GAPPS and Magis
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/Yoshino-StockDevelopment
Download:
ROM https://crdroid.net/<device codename>
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/10.0/changelog_maple.txt
Known issues:
. Test and Tell
Visit official website @ crDroid.net
Xperia ALL ROMS Group
crDroid Community Telegram
Donate to help our team pay server costs
Contributors
Shujath, modpunk, derf elotROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: Lineage
Version Information
Status: Stable
Stable Release Date: 2020-06-29
Created 2020-06-29
Last Updated 2020-06-29
Instructions :
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
Install Latest Firmware
Grab the Sony Stock firmware using e.g. XPeriFrim. You should always flash the firmware matching the LOS build.
Grab newflasher and put it in the same folder as the firmware files.
Read the newflasher original post on XDA for general instructions!
Remove the following from the folder so they won't get flashed:
all *.ta files (keep the one in the boot/ directory)
Turn off your phone
Hold the volume down button and attach it via USB to your system till you see LED turning green
Run newflasher from within this directory to flash the remaining files
Skip the second optional step (dumping of trim area), it's useless if your bootloader is unlocked already and takes a long time.
Hit Yes for all the next questions asked in Newflasher(Only dumpin of trim area should be selected no and rest all questions should be selected as yes.
Once Newflasher flashes the Stock rom, boot into it and make sure volte is available.(VOLTE WILL NOT WORK ON BLISS IF YOU DO NOT HAVE IT IN STOCK ROM.
Incase you are not able to see volte icon in stock either your carrier does not support it or there is an issue with the stock rom(Try flashing it again).
Once you confirm Volte is available in stock, Flash the TWRP recovery and follow below instructions carefully.
Boot into recovery >> Format Data >> Power off the Phone.
Again boot into recovery >> Format Data >> Power off the Phone.
This time boot into recovery >> Wipe Internal Storage.
Flash ROM, Gapps, Magisk.
In the setup wizard select SIM 1 as the default sim for calls data and message.
Once Boot is complete, wait patiently for few mins.
Go to Settings >> Blissify >> Advanced System Icons >> Set icon for Volte.
Voilllaa you should have volte and dual sim both enabled.
Google Apps
You can download and install the Google Apps from opengapps.org. You need ARM64 and 10.x. I suggest to *always* use the pico or nano package. If you need additional apps you find them in the Play Store.
MicroG
This ROM does support Signature Spoofing. However we are watching MicroG and check if they provide newer builds e.g. for Android Pie.
FEATURES AND ISSUES
Code:
- Boot: Ok
- Bluetooth: Ok
- WiFi: Ok
- WiFi Hotspot: Ok
- RIL - Phone - Data: Ok
- VoLTE: Ok
- GPS: Partially OK(Working with carrier network)
- Camera: Ok (SONY Stock Camera)
- Camcorder: Ok (SONY Stock Camera)
- Lights: Ok
- MicroSD: Ok
- Accelerometer: Ok
- Compass: Ok
- Gyroscope: Ok
- QTI sensors: Ok
- Touchscreen: Ok
- FM Radio: NA
- Fingerprint: Ok
- Vibrator: Ok
- Microphone: Ok
- Audio & music: Ok
- Bluetooth audio: Ok
- NFC: Ok(Need Testing)
- Kernel: Ok
- Graphics: Ok
- 3D Rendering: Ok
- Clock: Ok
- Offline Charging: Ok
- USB: Ok
- USB OTG: (Need Testing)
- Encryption: Broken
- Live Display (Profile changing on Reboot)
- SEPolicies: Enforcing
[/SIZE]
Known Issues
Please test and reply
Download and Changelog:
29th June :
-- Initial Release :
Changelog :
- Enabled strict thermals for quick charging
- Updated display related props
- Fixed randomly loosing of network
- Maps Fixed.
- Many more which I forgot
Download : https://www.androidfilehost.com/?fid=8889791610682881314
09th August 2020
Changelog :
* We are now Official.
* Managed to get RIL and Volte working wihtout
* Modem Switcher
* Customization Selector
* Modem Customization
* Fixed Random loss of Network on both Single and Dual SIM.
* Fixed Maps Crash, Huge thanks to @rcmiku
* Added Xperia Album thanks to @
* Removed Unncessary volte props causing crashes on the system.
* Satery net still passing out of the box
* Enabled Vulkan rendering.
* Removed unused Symlinks for Adreno.
* Downgraded android.hardware.gnss to 1.0
* Upgraded display vendor vendor.display.config to 1.9
* Added GNSS packages in try to fix offline GPS.
* Added CNE packages for better connectivity.
* Added IWlanService for VoWifi(Still not working)
* Added NXP hal for NFC
* Addressed CND Denails.
* Fixed Android Debugging
* Fixed Stock Camera memory Leak
* Unified Device Trees (Device will get props accordingly)
* Fixed data issue on single SIM devices(No need to toggle WiFI)
* Removed Vulkan rendering which was causing Blank screen on various apps.
* Added Sony Stock Movie Creator App
* Removed buggy DT2W
* August Security Patch merged
* Kernel upstreamed to 4.4.232
* GPS Fixed
* Enabled Doze
* Enabled sensor based wakeups(Includes Tilt, handwave, pickup, Pocket).
Download Link : https://sourceforge.net/projects/cr...Android-10.0-20200809-maple-v6.9.zip/download
11th Feb 2021
Changelog :
* January Securty Patch
* 4.4.255 Kernel
* CrDroid code upstream.
* Encryption Fixed(Format Data if you are unable to boot).
Download : https://www.androidfilehost.com/?fid=17248734326145735327
I did try Android 11 and felt Camera quality is degraded, Will stick around to 10 for a while.
woahhhh i will try now sob ???
wowwwwww, thank you so muchh
update, I have tested this rom:
+ gmaps latest version works
+ camera hardware button works(need go to rom settings -> enable camera hardware button )
+ the rom is really smooth, but from my experience, havoc is the most smooth rom
Great work Shujath!!!
duongcuong96 said:
update, I have tested this rom:
+ gmaps latest version works
+ camera hardware button works(need go to rom settings -> enable camera hardware button )
+ the rom is really smooth, but from my experience, havoc is the most smooth rom
Great work Shujath!!!
Click to expand...
Click to collapse
Hello. Is havoc stable? Gmaps is working? How much time to detect sim card?
Thanks.
Dark mode deactivate after reboot.
Led battery bar not working.
It's possible to change "lineage_maple" to for example G8142 o Xperia G8142? Where?
Thanks
Edit. Anyone knows wth happened?
Sent from my Sony lineage_maple using XDA Labs
Where is "smart charging" fuction?
Thank you
zavros said:
Where is "smart charging" fuction?
Thank you
Click to expand...
Click to collapse
Use battery charge limit from playstore.
Sent from my Sony lineage_maple using XDA Labs
Hakkinen3K said:
Hello. Is havoc stable? Gmaps is working? How much time to detect sim card?
Thanks.
Click to expand...
Click to collapse
Hello, havoc is pretty stable, but camera button not working, sim card detect is fast, just like crDroid you are using now, Gmaps latest version did not work yet, but will be fixed soon, since our great Shujath also maintenance havoc too
Hakkinen3K said:
Dark mode deactivate after reboot.
Led battery bar not working.
It's possible to change "lineage_maple" to for example G8142 o Xperia G8142? Where?
Thanks
Edit. Anyone knows wth happened?
Click to expand...
Click to collapse
First of all if no logs provided no bugs detected
Dark mode is working fine after restart and led battery bar too
Did u follow my instructions on how to install the ROM?
duongcuong96 said:
update, I have tested this rom:
+ gmaps latest version works
+ camera hardware button works(need go to rom settings -> enable camera hardware button )
+ the rom is really smooth, but from my experience, havoc is the most smooth rom
Great work Shujath!!!
Click to expand...
Click to collapse
Very much agree, havoc is really smooth
Got a question if anybody can help me, not involve the rom but I don't know...I tried to edit Mixer_paths_tasha.xml for change values for Volume I use mix Explorer text editor, code editor, fx file manager text editor and when I save the values changed but if I reboot the phone the values back to default.
Sent from my Sony lineage_maple using XDA Labs
I installed Bliss on my wife's XZP and due to the network problem and as @Shujath mentioned that the network problem is fixed on crDroid and it will be fixed on the other roms along with July security update, I decided to use crDroid till then but now that i installed it I don't know after fixing Bliss which rom should I use: crDroid? Bliss? Havoc OS? PE? I mean all of them are great. Thanks to Shujath, you guys have a lot of options to use on XZP.
09th August 2020
Changelog :
* We are now Official.
* Managed to get RIL and Volte working wihtout
* Modem Switcher
* Customization Selector
* Modem Customization
* Fixed Random loss of Network on both Single and Dual SIM.
* Fixed Maps Crash, Huge thanks to @rcmiku
* Added Xperia Album thanks to @
* Removed Unncessary volte props causing crashes on the system.
* Satery net still passing out of the box
* Enabled Vulkan rendering.
* Removed unused Symlinks for Adreno.
* Downgraded android.hardware.gnss to 1.0
* Upgraded display vendor vendor.display.config to 1.9
* Added GNSS packages in try to fix offline GPS.
* Added CNE packages for better connectivity.
* Added IWlanService for VoWifi(Still not working)
* Added NXP hal for NFC
* Addressed CND Denails.
* Fixed Android Debugging
* Fixed Stock Camera memory Leak
* Unified Device Trees (Device will get props accordingly)
* Fixed data issue on single SIM devices(No need to toggle WiFI)
* Removed Vulkan rendering which was causing Blank screen on various apps.
* Added Sony Stock Movie Creator App
* Removed buggy DT2W
* August Security Patch merged
* Kernel upstreamed to 4.4.232
* GPS Fixed
* Enabled Doze
* Enabled sensor based wakeups(Includes Tilt, handwave, pickup, Pocket).
Head over to Post#3 for download links.
Thanks for the update, it's one of my favorite and the best rom!!
@Shujath, thanks for the update.
Is webview fix even with vulkan enabled?
Sent from my Sony G8142 using XDA Labs
I have been testing the rom for a few days and it is going quite well, only I have the doubt if there is any way to improve the audio? since at least the speaker is too low. And is there also a way to change the size of the icons at startup? since I did not find how to do it. Thank you
Habacuck said:
I have been testing the rom for a few days and it is going quite well, only I have the doubt if there is any way to improve the audio? since at least the speaker is too low. And is there also a way to change the size of the icons at startup? since I did not find how to do it. Thank you
Click to expand...
Click to collapse
For sound, edit Mixer_paths_tasha.xml search for:
Code:
<path name="SPEAKER">
replace de values 82 for 84,85, maximum 86.
For headphones, search for:
Code:
<path name="headphones">
and replace de values to 82 or 84
Recommend that you install Dolby Digital Plus.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CAF Android 11.0 - LA.UM.9.x
for the Xiaomi Redmi Note 8/8T
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's CAF?
CAF stands for Code Aurora Forum. It's a fork of AOSP which is well optimized for Qualcomm Snapdragon platforms and has a higher degree of performance, battery life, and functionality compared to plain AOSP. In addition to the opensource CAF android base, these builds also use Qualcomm's proprietary Android 11 Board Support Package (BSP) for Snapdragon 665, to ensure maximum compatibility and functionality with Android 11. It can also be called an engineered ROM, as it's built from pure CAF sources and BSP in the same way OEMs do.
CAF system version: LA.QSSI.11.0.r1-07000-qssi.0
CAF vendor version: LA.UM.9.11.r1-02100-NICOBAR.0
Security patch: November 2020
Build status: Stable | Enforcing | User | release-keys
Features on top of pure CAF 11
Merged november security patch and AOSP 11.0_r15 tag
Theming support - accents, fonts, icon packs from pixel 5
Rounded icons and corners by default
Disabled unlock animations
Black as default dark theme
Blur tweaked and enabled by default
Improved scrolling responsiveness
Faster screenshot capture and dismissal
Mini panel for wifi and NFC
QS Panel rows/columns customisation
Auto 3x3 QS panel when media player is hidden
Bluetooth battery level on statusbar
Advanced reboot options
Tweaked statusbar icon paddings
Battery light toggle (ginkgo only)
Dedicated battery saver extended to kernel-level
Removed screen recorder audio restrictions
Double tap to sleep on lockscreen
Xiaomi Parts - dirac, clear speaker
Vulkan as default UI renderer
ART and bionic optimizations
Cleaned up useless CAF apps
Permissions hub
MicroG support
Misc fixes & stability improvements
GApps build features - all of the above, and:
Inbuilt gapps replacing AOSP/CAF apps
Pixel theme by default
Pixel sounds
Pixel dark bootanimation
Pixel launcher
Pixel theme picker
Pixel live wallpapers
Pixel screenshot editor (Markeup)
Enhanced battery stats (Turbo)
Lockscreen Smart Space
Introducing QuicksilveR kernel v2 rebased on CAF's latest android 11 kernel source and 4.14 linux stable merged in!!
What's working?
Boots
RIL (Calls, SMS)
Mobile data
Bluetooth
Bluetooth Audio
WiFi/hotspot
VoLTE, VoWiFi
Media (audio/video)
Cameras
Camcorder, EIS
GPS
Fingerprint sensor
Notification LED (on ginkgo)
NFC (on willow)
DRM/widevine
Sensors
IR Blaster
WiFi Display
Enforcing SELinux
Offline charging
FM Radio
SafetyNet
ADB
etc.
What's broken?
Encryption (decrypted by default)
You tell me!
How to install?
MANDATORY - be on latest android 10 firmware
Wipe system, vendor, cache
Format data
Flash ROM
Reboot
Enjoy CAF's Android 11 goodness on your ginkgo/willow!
How to upgrade from an older build?
Wipe system, vendor, cache, dalvik
Flash ROM
Flash MagiskR.zip (optional)
Reboot
How to get root? (optional)
After 1st boot, reboot to recovery, flash MagiskR.zip and reboot.
Downloads (vanilla/gapps)
ROM: https://www.androidfilehost.com/?w=files&flid=319085
Firmware: ginkgo | willow (android 10)
Screenshots
GApps - https://imgur.com/a/6pqCD8q
Vanilla - https://imgur.com/a/hQKIix9
NOTE: Make sure to read the FAQ in post #2 before asking questions. For reporting any bugs, describe the issue properly and make sure to accompany it with a logcat. Without a logcat, bugs cannot and will not be fixed.
Don't forget to hit the thanks button to show love and support my work.
XDA:DevDB Information
CAF, ROM for the Redmi Note 8
Contributors
Adithya R
Source Code: [url]https://github.com/caf-ginkgo/kernel_msm-4.14[/URL]
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Android 10 firmware - MANDATORY
Version Information
Status: Stable
Created 2020-10-26
Changelog
Code:
caf-qssi_ginkgo-11.0-20201026
- Initial release
caf-qssi_ginkgo-11.0-20201104
- Merged november 2020 security patch
- Updated CAF system version to LA.QSSI.11.0.r1-07000-qssi.0
- Fixed reboots at bootanim
- Fixed broken sensors (eg. magnetometer)
- Added exfat sdcard support
- Improved notch cutout to be smooth like MIUI
- Improved UI performance
- Improved bootup speed
- Fixed issues with audio (crackling noise etc.)
- Fixed fingerprint access to external apps and in setup wizard
- Switched to stock thermal engine
- Updated device blobs from MIUI global stable
- Force HAL1 camera for some social media apps
- Improved memory management (scudo/lmkd)
- Fixed fingerprint sensor issues in FPC variants
- Added double tap to sleep on lockscreen
- Added permissions hub (privacy indicators)
- Removed emergency icon from lockscreen
- Other misc fixes and improvements
FAQs
Q: Is MiuiCamera included?
A: No, the MiuiCamera from android 10 doesn't work in 11, so a fresh port from Mi A3 is required whenever android 11 is released for it.
Q: What's the 4 or 5 number beside the wifi icon?
A: It's a CAF feature which shows the 802.11 generation number. 4 stands for 802.11n, 5 stands for AC, 6 for AX and so on.
Q: Does the main rear camera have yellow tint? This bug was there in AOSP 11.
A: No, it has been fixed.
Q: How to get weather in at a glance widget? It just shows me the date
A: There's a quite simple trick for this, just add another instance of at a glance widget manually onto another home screen. The one on the main home screen gets refreshed automatically!
Q: This ROM is laggy! Expected more since its CAF.
A: Most importantly, let the ROM settle after its booted, janks will eventually disappear. In my testing I've faced no lags at all except in the first 10 mins after booting. Do keep in mind that this is an initial A11 release, both from CAF and my side. The kernel used (QSv2) is also in its early stages as it's entirely rebased on android 11 kernel source.
Q: Next update when? ETA PL0X
A: Updates will be dropped as soon as CAF releases a new android 11 tag for our chipset (trinket) or when there's a new security patch available. Please do not spam XDA or telegram for ETAs.
Rom screenshots?
sunset_ms said:
Rom screenshots?
Click to expand...
Click to collapse
It's literally written in the 1st post, use your eyes.
Sir big fan. Thanks for the hard work bro
It's finally here!
stuck on google logo for like 5 Minutes. Is it normal?
pinkman420 said:
stuck on google logo for like 5 Minutes. Is it normal?
Click to expand...
Click to collapse
Have you updated the firmware?
Are the Aux Cams are working? Incl.48MPX?
Thanks for the Hard Work
Thanks for this! Works very good by just following your simple instructions!
I have a question: how can I enable bubble notifications / chats like you've done on the screenshots? Again, thanks a lot for bringing Android 11 to Redmi users!
ku0l
every time i reboot, it's loops 4 times which gives me anxieties... i thought the loops only at first initialization but it stays whenever i tried rebooting, thankfully its always boot to system but the loops really smh, rebooting on this rom is quite an experience
i installed that magiskR, is this the cause?
edit: clean installed once again but flash dfe after install rom and magisk at next reboot
NO BOOTLOOPS and boot very fast, rom is smooth no lag and battery usage is better than caf q (reloaded)
nneko904 said:
every time i reboot, it's loops 4 times which gives me anxieties... i thought the loops only at first initialization but it stays whenever i tried rebooting, thankfully its always boot to system but the loops really smh, rebooting on this rom is quite an experience
i installed that magiskR, is this the cause?
Click to expand...
Click to collapse
Did u format data and update firmware? For me rom works good, without magisk btw.
nemanjsb said:
Did u format data and update firmware? For me rom works good, without magisk btw.
Click to expand...
Click to collapse
you can't boot without format data, so how do i? also i use stable firmware Q
rom works good for me too, just the problem is when i rebooting it loops albeit it go system everytime it still took long time
Big fan of your work, thanks for another amazing ROM
Edit: I'm also having the reboot problems reported by @nneko904 (although they don't bother me). Also, File Transfer is not working when in system, only in recovery
Edit2: updated Magisk to v21 and Manager to 8.0.2 and seems like reboots are gone. Procedure is as follows:
- Install MagiskR.zip as described in initial post
- Boot to System, go into Magisk Manager
- Setings > Change Update Channel to "Beta"
- Update Magisk Manager via Magisk Manager's initial page
- Reboot
- Go into Magisk Manager and update Magisk. Don't use Recovery Mode, and choose Direct Install. Wait for it to finish and reboot.
CheepPlüm said:
Are the Aux Cams are working? Incl.48MPX?
Thanks for the Hard Work
Click to expand...
Click to collapse
All the auxiliary cameras are working, use trcam to use them all at one place.
---------- Post added at 03:59 AM ---------- Previous post was at 03:54 AM ----------
DarkLey said:
Big fan of your work, thanks for another amazing ROM
Edit: I'm also having the reboot problems reported by @nneko904 (although they don't bother me). Also, File Transfer is not working when in system, only in recovery
Edit2: updated Magisk to v21 and Manager to 8.0.2 and seems like reboots are gone. Procedure is as follows:
- Install MagiskR.zip as described in initial post
- Boot to System, go into Magisk Manager
- Setings > Change Update Channel to "Beta"
- Update Magisk Manager via Magisk Manager's initial page
- Reboot
- Go into Magisk Manager and update Magisk. Don't use Recovery Mode, and choose Direct Install. Wait for it to finish and reboot.
Click to expand...
Click to collapse
To fix Redmi note 8 MTP not detected (caf Android11) This fix is for Windows users who doesn't see any MTP devices on their My Computer
1. Plug In your Device
2. Click Start and Search for Device Manager.
3. Search for Android Devices/ADB(Usually at the top of the devices)
4. Uninstall Any ADB drivers installed.
5. Re-insert your phone after uninstall
[Fix Credits - http://t.me/tokatsu ]
whyredFire said:
All the auxiliary cameras are working, use trcam to use them all at one place.
Click to expand...
Click to collapse
Where can I get trcam? Pls give link of working trcam.
Always on Display
How to turn off AOD on this rom? AOD draining so much battery on my device:crying:
Is there any ways to enable encryption?
hi, thanks for your works
my question, is signature spoof is supported?
---------- Post added at 05:20 AM ---------- Previous post was at 05:20 AM ----------
hi, thanks for your works
my question, is signature spoof is supported?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ArrowOS
ABOUT
ArrowOS is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate to us
Blog: blog.arrowos.net
Checkout more documentation at (maintainership/contributing): Check this out
WHAT WORKS?
Almost everything
WHAT DOESN'T WORK?
You tell me
Be sure to include a log : check how to
DOWNLOADS
Click here to Download
Read our blog article/post about:
* HOW-TO report a bug
* GAPPS and VANILLA variants
* Checking build integrity
ROM Source: https://github.com/ArrowOS
Device Tree: Lenovo Zuk z2 plus device tree
Vendor Tree: Lenovo Zuk z2 plus vendor tree
Kernel Source: Alchemy 3.18.140 by @ZyxxeZ
Thanks to:
@MR.HACKER5476
@ZyxxeZ
@geekboyprometheus
For their work on z2 plus non treble trees
Also thanks to @sanketp60 , @Rasenkai99 , @ZyxxeZ , @aswin_a_s for the great help and assist for build help and fixing bugs.
Lastly i would thank all the tester.
Bugs :
Vo-wifi calls
Native video calls from sim card not social app ones work fine
Navbar is not present as we have utouch if someone wants navbar to use gestures install any root explorer edit system.prop present in /system and just add this line at end, save and reboot qemu.hw.mainkeys=0
Changelog :
Device Side:
03/04/2021
- Initial Build
- Massive blob updates wfd, seccomp policy, cne, dpm, drm, qmi, radio, ims, graphic, media, av, rtp, protobuf, tui, peripheral, time service, gps, perf, power off alarm, sensor, libqcmaputils, libqrtr, eMBMS, audio, blobs from LA.UM.9.6.2.r1-03600-89xx.0 thanks to @ZyxxeZ for patching and @aswin_a_s for bsp zip.
- Merged latest caf tag LA.UM.8.6.c26-02400-89xx.0 into kernel also switch from statix to alchemy all credits to @ZyxxeZ for kernel tree.
- Compiled using Proton Clang 13.0
- Fixed instagram bug where videos are glitched due to old media xml in tree now all videos play fine
- Fixed low sound after reboot, if you still face low sound then flash dolby or viper
- Switch to new display and media HALS from LA.UM.9.6.2.r1-03600-89xx.0
- Fixed Press Home To Wake PH2W
- Added custom biometric now finger print unlocks faster
- Added underclocks and undervolts in kernel to save battery and run cool for better SOT/bb
11/04/2021
- Initial TREBLE Build with latest VNDK 30.0
- Se Linux ENFORCING
- Blob updates from LA.UM.9.6.2.r1-04100-89xx.0
- Enabled Smart charging
- Replaced stock snap cam with Google Camera Go
- Fixed some apps crashing like saavn, kredivo and other banking app which needed se linux to be enforcing
- Optimized Pixel offline charging animation now its smooth
- Disabled Always on display by default
25/05/2021
- Many SE denials have been addressed compared to last build where denials were spamming in dmesg logs now no need to flash permissiver
- split fstab loading load userdata on late fs and update fstab flags
- drop bootanim services
- Drop many deprecated flag including kernel flags
- Remove I-WLAN blobs
- fix init.qcom.early_boot.sh path
- Many more optimizations and bug fixes under the hood
12/06/2021
- Update Libaudcal from LA.UM.9.6.2.r1-04100-89xx.0 this fix the annoying audio issue which was present from pie on 3.18 roms.
- BatteryMeterView: fix logcat warning spam, This spam occurs when displaying keyguard.
- Silence spammy logs from camera blobs
- Filter out QTI performance spam
- Fixed many things crashing in system which created a hit on performance in previous build now build runs fluid all thanks to @ZyxxeZ for many source related patches for log spam and fixing the audio issue.
- Kernel updated and improved battery on idle and fixed screen freeze issues in games
14/07/2021
* Update GPS from LA.UM.9.6.2.r1-04100-89xx.0 & cleanup gps blobs
* Fix Gps not found in waze maps app
* Import hotword blobs from qssi-user 11 RKQ1.200826.002-21.6.2 release-keys
* Fix OK/HEY Google, now works for google assistant
* Kernel - added KCAL with default sat = 50 for rich boosted colors look
* Added kernel boosts for more smooth experience
* Kernel - Enabled 10 finger multitouch
* Disabled blurs by default;
* Addressed many sepolicy denials & reduce system logspam
* Improved stability and fix lag, stutter issues in ui
13/08/2021
* Update some audio blobs from LA.UM.9.6.2.r1-04100-89xx.0
* Force disable updatable APEX
* Drop Iorapd properties
* Kernel: Remove BCL (Fix phone lag below 30%)
* Kernel: Enable Exfat & Ntfs
10/09/2021
* Update bluetooth blobs from cheeseburger (OnePlus 5)
* Added ant+
* Disabled significant motion detector which caused idle drain
* Fixed wifi and bluetooth mac
* Added drm props
* Set voice call volume steps like on stock zui
* Fixed geekbench opencl test
* Removed unneeded cmdline options
* Improved pixel offline charger animation
* Build libdac from source
* Added xml for unlimited google photos
* Compiled with Clang 13.0.2
24/12/2021
* Initial Stable Build based on Dmitrii ( @ shuttercat ) trees
* Fixed Random Reboot issue which was present on 4.9 kernel based roms
* Switched from stock Zuk msm8996 thermals to Sony msm8996 thermals in kernel
* Kernel unstreamed 4.9.290 Alchemy
* Compiled using TRB Clang 14, LTO, Polly
* Se-Linux Status Enforcing
* Safetynet Pass even without magisk
* Low audio bug which was present in 3.18 is completely fixed now
Source Side:
- https://arrowos.net/changelog.php
Reserved
Cool, will there be a gapps version?
Xu.Pa K.u said:
Cool, will there be a gapps version?
Click to expand...
Click to collapse
Probably no,
You can flash nik gapps core which has minimum things
Gapps build consume more battery than vanilla also takes lots of time to settle down this results in heating
No point in building also users want call recording in dialer which is not provided by google dialer
@Pranav Temkar Appreciate your efforts. keep up the good work. If possible please also do some other ROM's for Zuk Z2 Plus.
Abhi_T said:
@Pranav Temkar Appreciate your efforts. keep up the good work. If possible please also do some other ROM's for Zuk Z2 Plus.
Click to expand...
Click to collapse
Currently msm xtended development has come to halt the source will be back soon
So i was thinking to maintain a rom with many customization and one minimal rom
Arrow fits best its pretty stable so will work on only these two maybe i change my mind later
Nice Work Sir
xtra sharif said:
Nice Work Sir
Click to expand...
Click to collapse
Thanks a lot sir
Some more Screenshots Below
xtra sharif said:
Some more Screenshots Below
View attachment 5271511View attachment 5271511View attachment 5271513View attachment 5271515View attachment 5271517View attachment 5271513View attachment 5271515View attachment 5271517
Click to expand...
Click to collapse
Thanks these will help others much appreciated
Will this go official?
osmosi said:
Will this go official?
Click to expand...
Click to collapse
No this wont go official as confirmed i had asked kuber sir he wont be doing arrow for zuk as the phone is being used by his sister and no blind builds from him
Also there is a pact where kuber will give me official only if i work with his trees but i will continue with dmitri trees
So it wont be official, i am happy without official too the rom provides same stability being unofficial too
Pranav Temkar said:
No this wont go official as confirmed i had asked kuber sir he wont be doing arrow for zuk as the phone is being used by his sister and no blind builds from him
Also there is a pact where kuber will give me official only if i work with his trees but i will continue with dmitri trees
So it wont be official, i am happy without official too the rom provides same stability being unofficial too
Click to expand...
Click to collapse
Oh Thanks for clarifying. I don't have any problem with Unofficial either,I just hope it gets regular updates.
osmosi said:
Oh Thanks for clarifying. I don't have any problem with Unofficial either,I just hope it gets regular updates.
Click to expand...
Click to collapse
related to updates/release i will be updating this on monthly basis as soon as arrow merge security patch i will push update.
New Update is live with april security patch and major tree changes
We have finally shifted to TREBLE with latest vndk 30 & SE Linux ENFORCING
with major performance tweaks and improvements
Build Date: 11/04/2021
Changelog:
Device side
- Initial TREBLE Build with latest VNDK 30.0
- Se Linux ENFORCING
- Blob updates from LA.UM.9.6.2.r1-04100-89xx.0
- Enabled Smart charging
- Replaced stock snap cam with Google Camera Go
- Fixed some apps crashing like saavn, kredivo and other banking app which needed se linux to be enforcing
- Optimized Pixel offline charging animation now its smooth
- Disabled Always on display by default
Source Side: https://arrowos.net/changelog.php
Bugs:
- With latest ril stack from caf, Volte work only on sim 1, if you change default data sim to sim 2 then rip volte.
- Safety net pass without root, if you install magisk then make sure you have enabled magisk hide, else safety net wont pass.
- If you face low audio then increase speaker gain using kernel manager or use dolby/viper.
Download links updated on thread shifted from gdrive to source forge
Pranav Temkar said:
Bugs:
- With latest ril stack from caf, Volte work only on sim 1, if you change default data sim to sim 2 then rip volte.
Click to expand...
Click to collapse
But this ever worked on custom ROMs ?? I would be glad if you could tell me on which custom ROM it worked... THanks for your hard work!!
vbvn said:
But this ever worked on custom ROMs ?? I would be glad if you could tell me on which custom ROM it worked... THanks for your hard work!!
Click to expand...
Click to collapse
Volte switch works on roms which have zui ril stack on lineage 17.1 dd3 had picked those old zui ril blobs and this fix volte switch issue
But those old zui ril blobs have great hit on battery life as network consumption is more in old zui blobs
Latest caf ril blobs have are well optimized than those old zui blobs
For reference you can check the commit message of the zui blobs present in lineage 17.1 by dd3boh
msm8996-common: Fall back to ZUI IMS-QMI-RIL stack · LineageOS/[email protected]
* From ZUI 4.0.247DEV * This fixes VoLTE not coming back after mobile data has been switched to 2nd SIM and back to VoLTE capable 1st SIM * Probably also fixes random IMS restarts as they can...
github.com
Everything's working alright except the navigation bar. It doesn't show up & when I edit the build.prop with "qemu.hw.mainkeys=0", the phone stucks on infinite bootloop.
shashke said:
Everything's working alright except the navigation bar. It doesn't show up & when I edit the build.prop with "qemu.hw.mainkeys=0", the phone stucks on infinite bootloop.
Click to expand...
Click to collapse
Probably you did something wrong
Check ss below it works fine