Develop Bugs

[ROM][Z3/DUAL] LineageOS 14.1 [Updated 11/21][UN-OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What it is
LineageOS 14.1 is built from official LineageOS sources devices trees and fresh caf 3.4 kernel port. This rom is worked to be as stable as possible to be used as a daily driver.​
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Who can use it
It's only for Z3/DUAL users with UNLOCKED UPGRADED BOOTLOADER (Devices on 23.5.A.1.291 release)​
How to install
First time install:
Make sure your rom is on 23.5.A.1.291 (Marshmallow release)
Power of the device and go into fastboot mode (plug usb + vol down key = blue led)
Flash latest TWRP version | If you are a Dual user, flash zip below before installing Dual version. / Also, if you already have a working TWRP (kernel/adv kernel) you can use the flashable zips below instead.
Shutdown the device
Maintain volume down & power until you see twrp splash screen
Wipe system, dalvik/cache and data
Install rom zip (+ gapps if you need it)
Reboot
Rolling back to Stock
Flash stock rom with emma or flashtool
If you flash with flashtool remember to check wipe apps_log and userdata partitions to get a clean install
LATEST RELEASE
2017-11-21:
Xperia Z3/Dual
Download
Xperia Z3: TWRP 3.1.1 - 2017/08/25
Xperia Z3 Dual: TWRP 3.1.1 - 2017/08/25
Previous release: https://drive.google.com/file/d/0B5VgArZxRLnTWk50dVpqeFFENE0/view?usp=sharing
Code:
[INDENT]
[B]What's new[/B]:
- Fixed some RIL issues
- Hybrid builds (Z3 and Dual support in one package)
- November security updates
[/INDENT]
About TWRP
To access Recovery press Power On+Volume Down button with your phone off.
If it's your first time flashing it, unpack recovery.img and flash it via fastboot with the following command: fastboot flash FOTAKernel <filename>
Release Timeline
Code:
2017-10-21
- KRACK vulnerability fix
- Bluetooth CVE-2017-1000251
2017-10-10:
- Minor device init cleanup
- October security updates
- Updated Adreno RenderScript driver
2017-09-26:
- September security patch
- Blueborne vulnerability fix
- Default AVRCP to 1.4
- Native DC_HSPAP support
- Disabled VOIP Compress offload (use standard path instead)
- Updated netmgrd service
2017-08-25:
- Removed In-Device Diagnostics (not needed anymore)
- Removed old Google Widevine implementation
- Updated Sony specific binaries
- Updated configuration files for Radio/Data
- Updated Phone Vibrator settings
- Partially updated Sepolicy
- Added CPU configuration for TWRP
- Fixed TWRP usb mode for file transfer (when plugged in MTP mode is enabled)
- Fixed ADB support for TWRP (you can use "adb shell" command now)
2017-08-08:
- August security fixes
- Fixed daily reboot issue
- Fixed NFC Payments
- Fully updated blobs to Stock .291 (SHA1 sum verified)
- Fixed device build fingerprint (for upcoming builds with SafetyNet enabler mode)
- Cleaned a lot the device init files
2017-07-27:
- Fixed mac addresses
- Fixed device permissions
- Updated blobs
2017-07-22:
- Reworked init for MPdecision Android/TWRP
- Fixed audio crashes
- Updated mixer_paths
- Phone init cleanups
- Updated RIL
- Sepolicy denial fixes
- Final bluetooth audio calling fixes
2017-07-17:
- Added Sony device identifier for PlayStore (now you can download sony apps straight from playstore)
- Updated TWRP build.
- [URL="https://cve.lineageos.org/android_kernel_sony_msm8974"]Lots of kernel CVE fixes[/URL]
- Fresh .291 blobs
- Updated fstab
- Improved power config for os and recovery
- Added back 44100Hz audio output
- Bluetooth audio fixes
- AVRCP 1.5 enabled
2017-07-07:
- Official welcome back MPDecision!
- July 5 Security Patch
- Kernel patches
- Enabled AVRCP 1.5 Profile again
- Experimental 3AM reboot fix (Needs feedback)
2017-07-01:
- Updated Camera profiles
- Reworked Z3 Dual RIL (again)
- Stock led color pattern for battery charging
- Reworked thermanager
- Cleaned up init files
- More autobrightness tweaks
- Kernel security patches
- Added Hexagon DSP services
- Fixed init permissions
- Latest firmware for BCM4339 WiFi/BT/Radio chip
- Some minor audio changes to adress issues
- Changes to BT audio devices. (AVRCP-HFP)
Sources
Repository
Liking my work? A donation is always helpful to make up with real life expenses
XDA:DevDB Information
LineageOS, ROM for the Sony Xperia Z3
Contributors
xkeita
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2017-10-10
Created 2017-07-02
Last Updated 2017-11-25

What is not working
HW Encryption, --> 2017-04-16
60/120fps video recording
How to post
Reports without logs or step to reproduce are useless (read contribute).
Substratum is officially not supported into Lineage.
You are welcome to post your review: what is working, not working, etc... Check into know issues before.
You are welcome to report any typo, error, etc...
Try to keep thread clean as a dev reference. Thanks in advance.​
How to report problems
How to get logs
Here you have some info about how collecting log. It is always better to include reference to the Installed version. This guide is really detailed and explained everything about bug reports.​How to contribute
Code is like hieroglyphs for me:
No worries you can contribute anyway! Install the rom, do tests, read failure logs, look at internet for potential fix/similar users experience, is the biggest part of debugging. Then collect all of this and write your results here.
Code is like hieroglyphs for me and logs are worst:
No problem, collects logs the right way if you can, explain how you encounter the problem: detailed step to reproduce could be enough: explain exactly how you encounter the error/problem, it should produce each time someone repeat your steps. Then we will be able to fix it.

Credits : A big nyan to them!
Head developers
@xkeita
@tomascus
@nailyk
External contributors
@derf elot​
Testers
@tomgus1
@gr8st
@mcgi5sr2
@doriandiaconu
@Robot76
@panzerox123​

Downloading

Thanks for all your work, a years ago it was totally impossible tout imagine such a stable rom so thanks for all the team.
Will you add stock camera app to this rom ?
It may be a silly question but since Lineage OS add hardware fonctionnality that are device-specific, do you and LOS consider sony stock camera fonctionnality (and by extension app) as hardware fonctionnality that are sony-devices-specific ?
PS: sorry if there is any typo or mistakes, my french corrector just f*ck-up all my other-language-writed text x)
PPS: thanks to xda labs, that the fifth time I try to upload this message, I hope that you can read it entirely
PPPS: I gived-up with XDA Labs, This is send with my computer

Moiremoi said:
Thanks for all your work, a years ago it was totally impossible tout imagine such a stable rom so thanks for all the team.
Will you add stock camera app to this rom ?
It may be a silly question but since Lineage OS add hardware fonctionnality that are device-specific, do you and LOS consider sony stock camera fonctionnality (and by extension app) as hardware fonctionnality that are sony-devices-specific ?
PS: sorry if there is any typo or mistakes, my french corrector just f*ck-up all my other-language-writed text x)
PPS: thanks to xda labs, that the fifth time I try to upload this message, I hope that you can read it entirely
PPPS: I gived-up with XDA Labs, This is send with my computer
Click to expand...
Click to collapse
xkeita, nailyk and tomascus wanna go official first, so there is no need to think about porting some apps right now

sheng_zongxian said:
xkeita, nailyk and tomascus wanna go official first, so there is no need to think about porting some apps right now
Click to expand...
Click to collapse
It's not about porting ^^
In every LOS rom, there is some system apps that are device-specific (I think of the off-screen gesture in OnePlus device)
For our device I think about our DRM. It add a lot of optimization for image processing.
So I just ask the devs if they consider DRM and other image processing as equivalent thing to off-screen gesture

Moiremoi said:
It's not about porting ^^
In every LOS rom, there is some system apps that are device-specific (I think of the off-screen gesture in OnePlus device)
For our device I think about our DRM. It add a lot of optimization for image processing.
So I just ask the devs if they consider DRM and other image processing as equivalent thing to off-screen gesture
Click to expand...
Click to collapse
Install it

I've installed it, and it looks amazing as far as the smoothness and speed is concern though i have to check the battery usage and other apps.. will report later.

Hi rum thanks for being nice and stable for rum, but there is a brilliance error and over heating

Moiremoi said:
It's not about porting ^^
In every LOS rom, there is some system apps that are device-specific (I think of the off-screen gesture in OnePlus device)
For our device I think about our DRM. It add a lot of optimization for image processing.
So I just ask the devs if they consider DRM and other image processing as equivalent thing to off-screen gesture
Click to expand...
Click to collapse
you could ask them again later , when they have made this ROM OFFICIAL for us

report

nailyk said:
Install it
Click to expand...
Click to collapse
Already done
And for those who want it too, here is our framework.jar patched => here <=
(And here, the post where you can download the app)
DON'T FORGET TO WIPE DALVIK/CACHE

Is there a way to disable the orange theme for battery saving mode ? And completely disabling the rotation for the magnet charger?
Otherwise this ROM is super nice! Thanks for your great work!

Thanks for the update! Unfortunately, calls over BT are still not working on my end. (Build. 20170701 - D6603 - Sony SBH20)
This time I didn't pair my smartwatch just to see if that was the issue, doesn't seem like it.
Here's the full logcat and dmesg.
Logcat (Over 512kb so I had to upload it elsewhere)
Hopefully this info will help you guys out.
Cheers!

Canneloni said:
Is there a way to disable the orange theme for battery saving mode ? And completely disabling the rotation for the magnet charger?
Otherwise this ROM is super nice! Thanks for your great work!
Click to expand...
Click to collapse
LineageOS feature. You should be able to change the amount into settings.
On internet you probably can find some way to put that amount to 0.

There is any possibilities to upgrade this kernel (through modifications) into 3.10 or 3.18 keeping camera blobs? @xkeita @nailyk

Ahh .. paused charging is back . It's not bad stuff anyway , just in my country where is hot throughout the year is a lil bit annoying when ur battery low and u can't charge the phone because it's hot .

Canneloni said:
And completely disabling the rotation for the magnet charger
Click to expand...
Click to collapse
+1 for this. The device enters Desk Dock mode when a magnetic charger is used, which is really annoying, as it also interrupts Car Dock mode.
@nailyk: What about the Disable Desk Dock sources that I pointed you to?

I noticed a small amount of lag in the camera of the new build (lineage-14.1-20170701-xkeita-z3dual). Previously, I used the version (lineage-14.1-20170629-nailyk-z3dual). Nothing that harms me much. I just came to ask if the other members had the same problem, so I could know how to act.

[M-ROM][7.1][beta]Z1C_Flyme6.8.3.17R[Not Chinese Version]

[M-ROM][7.1][beta] Z1C_Flyme6.8.3.17R
[Not Chinese Version]​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
ROM name: Flyme
Original author: machao44/M-ROM
Description:
CARBON-CR-5.1-based adaptation.
Has been fixed for everyday use.
Retains Sony cameras, white balance, and sound effects.
My build is purged of chinese programs. Also I made some translations and improvements.
Features:
- Android security patch level: November 6, 2017
- USB / Bluetooth tethering
- Mobile Access Point
- X-Reality for moblie
- ClearAudio +
- Dynamic Normalizer
- Surround sound (VPT)
- S-Force Front Surround
- Equalizer
- Headphone selection
- Blocking numbers
- Sony Camera
- Flyme Camera
- Display White balance
Instructions:
1. Unblock BL and flash real-recovery (TWRP):
- Download to PC file with TWRP (for example) twrp.img.
- On your phone, enter in the fastboot mode: Turn off the phone, hold the volume up, connect the usb cable, the indicator should turn blue.
- On the PC, open a command prompt and run the command: fastboot flash recovery C:\file_path\twrp.img
2. Make wipes: data, cache.
3. Flash archive zip with ROM.
4. SuperSU already embedded in the archive.
5. Reboot
Bugs/Issues:
- Shutdown menu restart is not available
- Off without animation
- Some of the interface shows the problem
- Call recording is invalid
- Need to manually set SMS alert tone
Downloads:
Z1C_Flyme6.8.1.22R
Z1C_Flyme6.8.3.17R
Changelog:
Updated 24/03/2018:
- Flyme6.8.3.17R
- Officially fixed some bugs
- Added game mode (setting - assisted)
- Updated system programs/libs
Thanks and credits
@ STORM //
@ zxz0O0
@serajr
@the_brad
@ tobias.waldvogel
@ Myself5
Contributors
machao44/M-ROM
Sources:
http://bbs.gfan.com/android-9261631-1-1.html
http://bbs.gfan.com/android-9279475-1-1.html
ROM Tencent QQ feedback group: 331452608
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.4.x
Based On: CARBON-CR-5.1-MOO-WEEKLY-honami-20170905-1117
Version Information
Status: Testing
Current Version: Flyme 6.8.1.22R beta
Release Date: 2018/01/28
Last Updated: 2018/03/24
Screenshots:

Could you please upload proper screenshots? They're very low resolution ones. Thanks!

skyhirules said:
Could you please upload proper screenshots? They're very low resolution ones. Thanks!
Click to expand...
Click to collapse
Click on the thumbnail and the picture opens in resolution 666 x 1184 pixels

Test
Has anyone tested this firmware yet ???? are there many defects?
dmgZero said:
[M-ROM][7.1][beta] Z1C_Flyme6.8.1.22R
[Not Chinese Version]​
​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
ROM name: Flyme
Original author: machao44/M-ROM
Description:
CARBON-CR-5.1-based adaptation.
Has been fixed for everyday use.
Retains Sony cameras, white balance, and sound effects.
My build is purged of chinese programs. Also I made some translations and improvements.
Features:
- Android security patch level: November 6, 2017
- USB / Bluetooth tethering
- Mobile Access Point
- X-Reality for moblie
- ClearAudio +
- Dynamic Normalizer
- Surround sound (VPT)
- S-Force Front Surround
- Equalizer
- Headphone selection
- Blocking numbers
- Sony Camera
- Flyme Camera
- Display White balance
Instructions:
1. Unblock BL and flash real-recovery (TWRP):
- Download to PC file with TWRP (for example) twrp.img.
- On your phone, enter in the fastboot mode: Turn off the phone, hold the volume up, connect the usb cable, the indicator should turn blue.
- On the PC, open a command prompt and run the command: fastboot flash recovery C:\file_path\twrp.img
2. Make wipes: data, cache.
3. Flash archive zip with ROM.
4. SuperSU already embedded in the archive.
5. Reboot
Bugs/Issues:
- Shutdown menu restart is not available
- Off without animation
- Some of the interface shows the problem
- Call recording is invalid
- Need to manually set SMS alert tone
Downloads:
Z1C_Flyme6.8.1.22R
Thanks and credits
@ STORM //
@ zxz0O0
@serajr
@the_brad
@ tobias.waldvogel
@ Myself5
Contributors
machao44/M-ROM
Sources:
http://bbs.gfan.com/android-9261631-1-1.html
ROM Tencent QQ feedback group: 331452608
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.4.x
Based On: CARBON-CR-5.1-MOO-WEEKLY-honami-20170905-1117
Version Information
Status: Testing
Current Version: Flyme 6.8.1.22R beta
Release Date: 2018/01/28
Last Updated: 2017/01/30
Screenshots:
Click to expand...
Click to collapse

problem
This firmware does not work. Doing everything according to instructions.But after hangs Flyme logo and spinning circle for two hours.
skyhirules said:
Could you please upload proper screenshots? They're very low resolution ones. Thanks!
Click to expand...
Click to collapse

AreusShow said:
This firmware does not work. Doing everything according to instructions.But after hangs Flyme logo and spinning circle for two hours.
Click to expand...
Click to collapse
It's strange.
Try to flash it file with flashtool.

problem
Unfortunately I don't know how to do it. I reflash via flashtool only firmware ftf format.
dmgZero said:
It's strange.
Try to flash it file with flashtool.
Click to expand...
Click to collapse

problem
Will someone help me???want to install this firmware ,but I can't. The problem with the bootloader

i installed it after wiping everything (full wipe+system+int+ext) and everything runs fine except some random fcs (media-storage, meizu-browser and some others. but this happens rarely and mostly directly after installing a3rd party app. not a big problem.
but i like the flyme design. wasnt aware of the flyme-meizu-os til now. but i must say: indeed i like it.
will check out, how it will correspond to microg or gapps the next days.
thx for this rom
edit: the boot time on first boot and after you've cleared dalvik cache is very long and i think i didnt see dexpreopt or art compiler filter entries in build prop. perhaps this can be optimized. but the boot time is killing me

??
how many minutes have you downloaded your device to flyme?????
drei.liter.milch said:
i installed it after wiping everything (full wipe+system+int+ext) and everything runs fine except some random fcs (media-storage, meizu-browser and some others. but this happens rarely and mostly directly after installing a3rd party app. not a big problem.
but i like the flyme design. wasnt aware of the flyme-meizu-os til now. but i must say: indeed i like it.
will check out, how it will correspond to microg or gapps the next days.
thx for this rom
edit: the boot time on first boot and after you've cleared dalvik cache is very long and i think i didnt see dexpreopt or art compiler filter entries in build prop. perhaps this can be optimized. but the boot time is killing me
Click to expand...
Click to collapse

Please unsubscribe those who have the same problem....

Hello, how to off navbar? I would like use SmartTouch.

I cannot get this ROM booting. Boot animation shows partly but then nothing.
I have unlocked bootloader, flashed latest stock firmware with Emma. Also flashed twrp 3.0.2 as real recovery. I can boot to twrp with power+vol down.
Same problem with several other Nougat ROMs for Z1C. Only ROM so far working is LOS 14 by munjeni.

simeoni said:
I cannot get this ROM booting. Boot animation shows partly but then nothing.
I have unlocked bootloader, flashed latest stock firmware with Emma. Also flashed twrp 3.0.2 as real recovery. I can boot to twrp with power+vol down.
Same problem with several other Nougat ROMs for Z1C. Only ROM so far working is LOS 14 by munjeni.
Click to expand...
Click to collapse
A common problem of phones with non-original display module. At the moment, this does not have a solution.

dmgZero said:
A common problem of phones with non-original display module. At the moment, this does not have a solution.
Click to expand...
Click to collapse
Yes, I have changed the display. But phone was working ok after that with stock firmware and as I said, with LOS 14 rom.
So what is different between e.g. Flyme and LOS? Something in kernel perhaps?

Updated 24/03/2018:
- Flyme6.8.3.17R
- Officially fixed some bugs
- Added game mode (setting - assisted)
- Updated system programs/libs

dmgZero said:
Updated 24/03/2018:
- Flyme6.8.3.17R
- Officially fixed some bugs
- Added game mode (setting - assisted)
- Updated system programs/libs
Click to expand...
Click to collapse
Good.
I'll install it now, check it out.

dmgZero said:
Updated 24/03/2018:
- Flyme6.8.3.17R
- Officially fixed some bugs
- Added game mode (setting - assisted)
- Updated system programs/libs
Click to expand...
Click to collapse
You can now turn off the navigation bar.
The usb file transfer is finally working.
Can now be installed

dose it work for C6903 ??!!

[ROM][13][OFFICIAL] PixelOS [AOSP][UNIFIED][09/05/2023]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies. We aim to provide an experience similar to Google Pixel phones with numerous performance enhancements and a small amount of useful additional features.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Device Specific Issues:
• Slow charging on Chinese variants
• 48MP doesn't work in MIUI Camera
• You tell me.
Requirements
• Latest Global Stable Android 11 firmware for ginkgo and willow users
Downloads
Get the latest PixelOS Build for Xiaomi Redmi Note 8/8T
Thirteen: Download
Twelve: Download
Firmware https://xiaomifirmwareupdater.com/firmware/ginkgo/
https://xiaomifirmwareupdater.com/firmware/willow/
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
DFE (optional)(not recommended)(read encryption faq) https://github.com/PixelOS-Devices/...8/Disable_Dm-Verity_ForceEncrypt_20201008.zip
Note: GApps are included, don't flash separately.​
Notes
• Based on OSS vendor
• Ships with QuicksilveR-v2.5 kernel
• MIUI Camera is included
• GApps are included
• Enforcing Build
• Encrypted Build
​Flashing Instructions
Clean flash (coming from a different ROM):
• Flash recovery (links above)
• Download ROM from the link above
• Download Magisk v23.0 or newer (optionally)
• Reboot to recovery
• Format data (if encrypted)
• Wipe system, vendor, cache, dalvik, data
• Flash latest android 11 global stable firmware (link above)
• Flash ROM zip
• Reboot and voila!
• To get root access, reboot to recovery after ROM setup and flash magisk.
Updating to a newer build (dirty flash):
• Wipe dalvik and cache (optional)
• Flash ROM zip and magisk (optional)
• Reboot and voila!
Join our Telegram Group https://t.me/PixelOSChat
Buy me a Coffee https://paypal.me/whyredfire
UPI: [email protected]
Source Code
PixelOS http://github.com/PixelOS-AOSP
Device Tree and Vendor Tree https://github.com/PixelOS-Devices
Kernel Tree https://github.com/PixelOS-Devices/kernel_xiaomi_ginkgo
Contributor: DqrKn3Zz​
ROM OS Version: Android 13/12.1.
ROM Kernel: Linux 4.14.x
Stable Release Date: 22 October 2021
Latest Release Date: 9 May 2023

Sccreenshots (both light and dark mode)
Karan's Channel
t.me
Updated for Android 12 (PixelOS 12.0)

Reserved

Cool AF

Does this ROM support fast charging and MIUI camera?

culec said:
Does this ROM support fast charging and MIUI camera?
Click to expand...
Click to collapse
Fast charging doesn't work in china models, although you can fix it by flashing A10 kernel for which you must be decrypted.
Yes it has micam.

Well, it's just a PE based ROM. I won't ask questions this time . Just tell me something makes me change into your ROM and voila!

whyredFire said:
Fast charging doesn't work in china models, although you can fix it by flashing A10 kernel for which you must be decrypted.
Yes it has micam.
Click to expand...
Click to collapse
Thanks for reply. Will you make it available in the next ROM version?

Thanks.

Thank you for the work, btw I have some questions: Is MIUI Camera included? Is the notification volume channel separated from the ring volume channel? I want my phone sounds louder whenever there is an incoming call but not when there are too many notifications come. I tried some 3rd' apps to fix it but when I adjust the notification volume, the ring's one is modified to the same level as the notification's too.

culec said:
Thanks for reply. Will you make it available in the next ROM version?
Click to expand...
Click to collapse
For that I'll have to release two variants of the same rom, one would be the regular one, and the other one with Android 10 kernel and decrypted build. That'll take me a lot of work.
I'll highly recommend you to flash Android 10 kernel with decrypted rom to fix it. Let me know if you want me to link a kernel.

mananhl said:
Thank you for the work, btw I have some questions: Is MIUI Camera included? Is the notification volume channel separated from the ring volume channel? I want my phone sounds louder whenever there is an incoming call but not when there are too many notifications come. I tried some 3rd' apps to fix it but when I adjust the notification volume, the ring's one is modified to the same level as the notification's too.View attachment 5234279
Click to expand...
Click to collapse
Yep, miui camera is included by default and everything is working in the same. But ring and notifications volume bar is merged

My phone-calls and stability is bad !!!
Why ?
When I call somebody, the phone offen crashes.

JonnyBoy1984 said:
My phone-calls and stability is bad !!!
Why ?
When I call somebody, the phone offen crashes.
Click to expand...
Click to collapse
Mostly its your local operator issue, its working fine here.
Try updating Dialer from the playstore for crashes.

This ROM is now certainly the fifth on my device (willow), but probably the last! I finally found it - a ROM that finally runs perfomant, smooth and so far without system crashes. This ROM is simply to recommend. Thanks a lot!
So far I haven't encountered any bugs - at least serious ones.

UntoastedToast said:
This ROM is now certainly the fifth on my device (willow), but probably the last! I finally found it - a ROM that finally runs perfomant, smooth and so far without system crashes. This ROM is simply to recommend. Thanks a lot!
So far I haven't encountered any bugs - at least serious ones.
Click to expand...
Click to collapse
Thanks a lot for your review. Next build is coming soon with a lot of fixes and improvements, hope you'll like it. I frequently share test builds on our telegram group https://t.me/pixelosginkgo

whyredFire said:
Thanks a lot for your review. Next build is coming soon with a lot of fixes and improvements, hope you'll like it. I frequently share test builds on our telegram group https://t.me/pixelosginkgo
Click to expand...
Click to collapse
I am glad to hear that. I am waiting for your new build.

I just tried PixelOS on my Willow (Note 8T), and I find it really good. There are just two bugs or limitations to fix:
1) Cannot use the Revolut banking app. Indeed, to connect, Revolut takes a selfie with the camera and does facial recognition. In practice, the selfie is taken well, but the application remains blocked on the photo made of me. I never had this problem with other ROMs. Of course, I tried to uninstall/reinstall the app.
2) Most of the other ROMs allow you to delete the free space under Gboard, which allows you to paste the space bar at the edge of the screen (Cf screenshot below). I haven't find how to do it with PixelOS.
Otherwise, for the rest, a system that seems stable and pleasant, thanks for your job

ManuD_Linux said:
I just tried PixelOS on my Willow (Note 8T), and I find it really good. There are just two bugs or limitations to fix:
1) Cannot use the Revolut banking app. Indeed, to connect, Revolut takes a selfie with the camera and does facial recognition. In practice, the selfie is taken well, but the application remains blocked on the photo made of me. I never had this problem with other ROMs. Of course, I tried to uninstall/reinstall the app.
2) Most of the other ROMs allow you to delete the free space under Gboard, which allows you to paste the space bar at the edge of the screen (Cf screenshot below). I haven't find how to do it with PixelOS.
View attachment 5241047
Otherwise, for the rest, a system that seems stable and pleasant, thanks for your job
Click to expand...
Click to collapse
The facial recognition thing should have been fixed.
This is a pixel based rom and doesnt pack extra customizations, you can surely flash magisk mods to get rid of that space. Although even the latest Pixels have it the same way.

Check 3rd post for download info and notes
Full Changelog
Device
- Added Blur toggle in dev settings
- Switched to qcom power hal and perf hal boosting
- Update redfin fp to March
- Wider and smoother notch cutout
- Updated stock blobs from MIUI 21.3.3
- Updated CAF blobs from LA.UM.9.11.r1-02800-NICOBAR.0
- Updated redfin fp to march (fixed safetynet)
- Fixed camera freeze in some social media apps
- Fixed camera lens switching delay
- Fixed voip/mic issues in some apps
- KCAL improvements in xiaomi parts
- Added vibration strength control in xiaomi parts
- Switched to new QTI thermal HAL
- Attempted to fix screen blackouts under sunlight/heat
- Disabled KPTI for performance improvement
- Reduced readahead to 128kB to improve storage performance
- GPS config optimizations and fixes
- Tuned cpusets for better performance
- Improved rounded corners and fixed hide cutout option
- Switched to android userspace LMKD
- Added support for willow hwversion 18.31.0
- Improved zram read/write performance
- Switched to QuicksilveR v2.5 kernel
- Merged LA.UM.9.1.r1-09100-SMxxx0.0 CAF and v4.14.223 in kernel
- Fast charging on chinese ginkgo variants maybe fixed
- Reduced minimum brighness
- Misc optimizations and fixes
Source
- OTA Updates
- March Security Patch
- Add blur in power menu
- Add Caffeine quick setting tile
- Add android S style media player in quicksettings and lockscreen
- Screenshot will follow system sound
- Added bt indicator for headsets
- Locked access to some QS tiles from lock screen without unlocking
- Changed Screenshot Tile chip colour to follow system
- Increased max password character limit to 64
- Added 2 button navigation gestures

Development [Courbet][Discontinued][Android 12.1] The XPerience Project 16.1 [CAF]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XPerience is a free, community built distribution of Android 12.0.0 which greatly extends the capabilities of your phone. This project are based on AOSP/CAF The XPerience Project since 2011
Code:
#include <std_disclaimer.h> /*
[LIST]
[*]Your warranty is now void.
[*]
[*]I am not responsible for bricked devices, dead SD cards,
[*]thermonuclear war, or you getting fired because the alarm app failed. Please
[*]do some research if you have any concerns about features included in this ROM
[*]before flashing it! YOU are choosing to make these modifications, and if
[*]you point the finger at me for messing up your device, I will laugh at you. */
[/LIST]
NOTE: READ this PLS
[]Please don't ask for etas []Please don't report same bugs all time []Report with logcat and dmesg []Screenshots representative only
Click to expand...
Click to collapse
Features:
Custom tiles (Caffeine, HeadsUP,Usb tether)
Power menu customizations (reboot to recovery one touch in advanced reboot, for bootloader do a long touch)
Theme appart dark, black
Bionic optimizations
NightFall Launcher our fork of Launcher3 (WIP)
3 fingers swipe take screenshot
Lockscreen charging info
Navbar inverted layout (WIP)
Gaming optimizations (Also recommend to switch to completwe yuki kernel if exist for your device)
Edge lightning
Adaptive playback
Double tap to sleep on lockscreen
Work in progress...
WORKING:
Boot
Rild
LTE/3G/2G
bluetooth
Camera
camcorder
MTP
Sensors
Led
Wi-Fi
MUSIC
sounds
Videos
DT2W
NFC
Bugs
You tell me
CAF BRANCH: LA.UM.9.14.r1-18400.02-LAHAINA.QSSI12.0 AOSP branch: android-12.0.0_r9
Download ROM
Our Web​
GAPPS: Not needed. included
The XPerience Project Contributors :
https://forum.xda-developers.com/m/teammex.4403780/
https://forum.xda-developers.com/m/herh2.7048111/
Source Code: https://github.com/TheXPerienceProject
ROM OS Version: Android 11 ROM Kernel: Linux 4.14.x ROM Firmware Required: Unlocked Bootloader Based On: AOSP/ CAF
Version Information Status: RELEASE
Changes in second post
Flash steps:
- wipe data,cache etc.
- flash rom
- format data
- reboot
If you like my work, you can buy me a coffee , coke or any drink all donations are appreciated.
https://www.paypal.com/paypalme/TheXPerienceProject​

2022-07-07
- Update vendor blobs from 13.0.8.0.SKQMIXM
- Update display stack from LA.UM.9.1.r1-11500.02-SMxxx0.QSSI12.0
- Introduce some Ambient Display features (Raise to wake, Wake up on gestures, etc)
- Improved some iop stuff
- Updated to latest Vantom
- Fixed NFC
- Fixed some issues with FP location
- Fixed flicker issue when use AOD
- more minor stuffs
2022-06-07/09
- Upstreamed to .281
- Fixed DT2W after reboot
- Improved battery drain issues
- Enabled more Network options
- Droped unnused nodes from powerhint
- implement advanced reboot options
- April SP
2022-05-23
* unlocking with fp slow should be fixed now
* fix chrome enabling issue ?
* Update translations
* Update camera
* Disable remote keyguard animation until it's fixed
* Configure side fingerprint sensor properties
* Fix mic issues
* Enable iorap stuff
2022-05-20
* Initial A12L based.
* Retturned some stuff from Xpe 16.0
* Bug fixes
2021-11-15
* Initial A12 build Experimental
* NOV ASB
* Updates vendor/system_ext fromMIUI 12.5.3.0
* Switched to AOSP refresh rate
* Use Walleye oreo fp
* Updated power_profile
* add haptic levels
* add power hal from pixel
* And more
2021-07-15
Gapps Included
* Initial Build A11

Awesome!
I want to try It. Any instructions for a correct installation? Thanks! @HerH2

Darknssfalls said:
Awesome!
I want to try It. Any instructions for a correct installation? Thanks! @HerH2
Click to expand...
Click to collapse
Wipe Data, Cahce And U need From Stock Rom + Flash Rom and Reboot..

HerH2 said:
XPerience is a free, community built distribution of Android 11.0.0 which greatly extends the capabilities of your phone. This project are based on AOSP/CAF The XPerience Project since 2011
Code:
#include <std_disclaimer.h> /*
[LIST]
[*]Your warranty is now void.
[*]
[*]I am not responsible for bricked devices, dead SD cards,
[*]thermonuclear war, or you getting fired because the alarm app failed. Please
[*]do some research if you have any concerns about features included in this ROM
[*]before flashing it! YOU are choosing to make these modifications, and if
[*]you point the finger at me for messing up your device, I will laugh at you. */
[/LIST]
NOTE: READ this PLS
Features:
Custom tiles (Caffeine, HeadsUP,Usb tether)
Power menu customizations (reboot to recovery one touch in advanced reboot, for bootloader do a long touch)
Theme appart dark, black
Bionic optimizations
NightFall Launcher our fork of Launcher3 (WIP)
3 fingers swipe take screenshot
Lockscreen charging info
Navbar inverted layout (WIP)
Gaming optimizations (Also recommend to switch to completwe yuki kernel if exist for your device)
Edge lightning
Adaptive playback
Double tap to sleep on lockscreen
Work in progress...
WORKING:
Boot
Rild
LTE/3G/2G
bluetooth
Camera
camcorder
MTP
Sensors
Led
Wi-Fi
MUSIC
sounds
Videos
DT2W
NFC
Bugs
You tell me
CAF BRANCH: LA.QSSI.11.0.r1-01200-qssi.0 AOSP branch: android-11.0.0_r39
View attachment 5362833 View attachment 5362835 View attachment 5362851 View attachment 5362843 View attachment 5362845
Download ROM
Our Web​
GAPPS: Not needed. included
The XPerience Project Contributors :
https://forum.xda-developers.com/m/teammex.4403780/
https://forum.xda-developers.com/m/herh2.7048111/
Source Code: https://github.com/TheXPerienceProject
ROM OS Version: Android 11 ROM Kernel: Linux 4.14.x ROM Firmware Required: Unlocked Bootloader Based On: AOSP/ CAF
Version Information Status: NIGHTLY
Changes in second post
Flash steps:
- wipe data,cache etc.
- flash rom
- format data
- reboot
If you like my work, you can buy me a coffee , coke or any drink all donations are appreciated.
https://www.paypal.com/paypalme/TheXPerienceProject​
Click to expand...
Click to collapse
Wow... official ROM...
Nice SIR...

wikwikXDA said:
Wipe Data, Cahce And U need From Stock Rom + Flash Rom and Reboot..
Click to expand...
Click to collapse
It is said format data before reboot, is not needed?

Lollauser said:
It is said format data before reboot, is not needed?
Click to expand...
Click to collapse
ok sir,,, thank

very stable, I recommend it! Thanks to developer.

did anyone tried ANX camera on this? i'm still waiting for my mi unlock timer :'(

it is "hey google" supposed to work?
it doesn't work to me, neither by installing google assistant

I wasn't able to install this ROM through twrp..some error popped up so I went ahead and installed crdroid

gingerboy92 said:
did anyone tried ANX camera on this? i'm still waiting for my mi unlock timer :'(
Click to expand...
Click to collapse
I have never used ANX Camera, but I installed it using the instructions below, but it gave me a black screen, then I went and manually allowed camera and other permissions for the app, now whenever I open it crashes. Please let me know when you get to it if it works for you.
Download ANXCamera v185R by Noid from here and 48MPFIX v201 from here.
Flash the downloaded archives in Magisk Manager.

mohye84 said:
I have never used ANX Camera, but I installed it using the instructions below, but it gave me a black screen, then I went and manually allowed camera and other permissions for the app, now whenever I open it crashes. Please let me know when you get to it if it works for you.
Download ANXCamera v185R by Noid from here and 48MPFIX v201 from here.
Flash the downloaded archives in Magisk Manager.
Click to expand...
Click to collapse
Otherwise, this ROM is so clean and I love it.

Rom updated, clean flash is recommended.

mohye84 said:
I have never used ANX Camera, but I installed it using the instructions below, but it gave me a black screen, then I went and manually allowed camera and other permissions for the app, now whenever I open it crashes. Please let me know when you get to it if it works for you.
Download ANXCamera v185R by Noid from here and 48MPFIX v201 from here.
Flash the downloaded archives in Magisk Manager.
Click to expand...
Click to collapse
makes sense since neither of the zip have the xml and lib for courbet. i'm back on miui for now, not that motivated to be testing software for now because of lockdown fatigue lol

New update!
Changelog above.

I like this ROM. Here's a summary:
- out of all the ROMs, this one gives me the best battery life
-"hey/ok Google" works
-The default launcher doesn't let you have a google search bar at the bottom of the home page, so I replaced it with Lawnchair
-Like with all the other ROMs, the always on display is backlit (probably because of Xiaomi's solution to black crush)

qpalzmqp said:
I like this ROM. Here's a summary:
- out of all the ROMs, this one gives me the best battery life
-"hey/ok Google" works
-The default launcher doesn't let you have a google search bar at the bottom of the home page, so I replaced it with Lawnchair
-Like with all the other ROMs, the always on display is backlit (probably because of Xiaomi's solution to black crush)
Click to expand...
Click to collapse
thanks for the comment. Could you explain about the aod? How the brightness works. be low will be low. is high will be high. What it does not have is that it is automatic brightness in AOD.

HerH2 said:
thanks for the comment. Could you explain about the aod? How the brightness works. be low will be low. is high will be high. What it does not have is that it is automatic brightness in AOD.
Click to expand...
Click to collapse
See the picture attached. On all of the custom ROMs, the aod is not AMOLED black. The pixels are on, like in the picture.
In the latest MIUI, the aod is AMOLED black.

qpalzmqp said:
See the picture attached. On all of the custom ROMs, the aod is not AMOLED black. The pixels are on, like in the picture.
In the latest MIUI, the aod is AMOLED black.View attachment 5397577
Click to expand...
Click to collapse
Here is a picture of AOD on pixel experience in complete darkness taken on a Nikon camera. You can see there is no light anywhere except the clock itself. Also, my experience with the latest miui global is that they made most black areas, like the camera app, not actually turn off pixels so it looks bad in the dark. AOD is also fine on crDroid btw.

[X00TD][ROM] Spark OS vEnergized[Android 12][OFFICIAL][28/1/2022]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Spark OS vENERGIZED
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
AOSP based rom with customization focused on stability and most of all smoothness.​
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
Volte
VoWiFi
GPS
What's broken?
Nothing AFAIK
Reboot to recovery
Wipe system,vendor,data, cache, and dalvik if coming from another ROM
Flash ROM zip
(optional) Flash GApps (for vanilla builds)
(optional) Flash Magisk (root)
Format data if encrypted
Reboot and voila!
Upgrading to a Newer Build
Reboot to recovery
Wipe cache and dalvik
Flash ROM zip
(optional) Flash Magisk
Reboot and voila!
ROM Download : Link1 (/\) | Link2 (sourceforge)
Magisk
NikGApps
HERE
Spark OS Source
Join our Telegram channels : Community | Device​Spark OS, ROM for codename
Device: X00TD
Maintainer: @jai_91
Build Type: Official
Device Source code : Device | kernel | Vendor
ROM OS Version: 12.0
ROM Kernel: Linux: 4.4.292
ROM Firmware Required: Any pie firmware
Version Information
Status: STABLE
Current Stable Version: ENERGIZED
Security patch level: JAN 2022
SELinux Status: Enforcing
Created 2021-10-27
Last Updated 2022-01-28

14/11/2021
Changelogs :-
Device:-
- Added call recoding properly
- Fixed audio recording from cam
- Fixed vanilla dialer incall buttons
- Updated FP to raven Jan2022
Source :-
Changelog for vEnergized based on Android 12 January security patch:
Feature Additions :
• Implemented Optional Wp Zoom
• Implemented Custom Ls Clock customization
• Reworked Qs clock picker with more clock designs to choose from.
• Added On the go mode
• Redesigned SeekBar
• Added pulse for all trigger option on edge lights
• Redid Vowifi and volte icon customization
• Restored Icon shapes from a11
• Added option for ambient ticker to pulse on new tracks
• GmsCompat Improvements
• Fixed microg spoofing
• Added Media Player Customization
• Added udfps customization (icon, animation , pressed color, custom icon)
• Prevent some rare SysUi crashes
• Added Game Space
• Added Alert slider support
• Added. Long swipe gestures
• Applied monet to fingerprint animation
• Added third party app overriding font support for custom fonts
• Added dark mode themes
• Added Advanced Playback
• Added more battery styles and improve the landscape one
• Added capability to allow tethering to use VPN upstreams
• More under the hood stuff

Zenparts, Spectrum in-built carried over from A11? Also can I use banking apps without root and flash other 4.4 kernels?

D0CT0RFATE said:
Zenparts, Spectrum in-built carried over from A11? Also can I use banking apps without root and flash other 4.4 kernels?
Click to expand...
Click to collapse
No , nothing is carried from A11 ...and you can't use bamk gapps without root , I may not have given detailed info in xda post . I'll update it morning , gave detailed info in telegram post , check that once

ROM is quite stable, pure stock Android and snappy. Haven't checked banking apps yet.
Good job done...
Hoping to see the Spark Fire customizations in the next updates.

Unable to get rid of Device Not Certified issue in playstore after installing Magisk and universal safety net fix.
A note on this will help in making this ROM as daily driver.

checksamir said:
Unable to get rid of Device Not Certified issue in playstore after installing Magisk and universal safety net fix.
A note on this will help in making this ROM as daily driver.
Click to expand...
Click to collapse
Try Force stop and clear data & cache for specific apps (like PlayStore etc.) and check again.

D0CT0RFATE said:
Try Force stop and clear data & cache for specific apps (like PlayStore etc.) and check again.
Click to expand...
Click to collapse
Above tutorial worked for me.
Still facing issue while adding screenlock. It is not accepting Pin/pattern/password.

checksamir said:
Above tutorial worked for me.
Still facing issue while adding screenlock. It is not accepting Pin/pattern/password.
Click to expand...
Click to collapse
Wdym by screen lock ? Normal phone lock? It was perfect when I checked

jai_91 said:
Wdym by screen lock ? Normal phone lock? It was perfect when I checked
Click to expand...
Click to collapse
Attaching the message I am getting everytime while adding a PIN/pattern/password.

checksamir said:
Attaching the message I am getting everytime while adding a PIN/pattern/password.View attachment 5444923
Click to expand...
Click to collapse
Goto recovery , mount data , open file manager , goto /data/system , delete lockscreen.db , reboot , set ..... it'll be fine

jai_91 said:
Goto recovery , mount data , open file manager , goto /data/system , delete lockscreen.db , reboot , set ..... it'll be fine
Click to expand...
Click to collapse
Yeah, worked like a charm..
It was locksettings.db in my phone. Thanks a ton...

@jai_91
In addition to performance, Battery backup has been outstanding on this ROM. No heating issues during charging and mobile hotspot - hotspot is on for the last 24+ hrs. Hoping it to be carried on in the next builds as well.
Only the battery usage information after last charge is getting reset in the middle or it could be the only bug have noticed. Please help me in case it needs to be resolved on my device separately.
Attaching the screenshot of battery usage for reference.

@jai_91
One observation on 4G calling - phone earpiece sound happens to be too low despite the volume is set to max in setting.

checksamir said:
@jai_91
One observation on 4G calling - phone earpiece sound happens to be too low despite the volume is set to max in setting.
View attachment 5450303
Click to expand...
Click to collapse
I second this. This 'issue' exists in the A11 build as well. I guess it can be fixed in the upcoming update.

Hi I got drop fps (lagging) when accessing homescreen. Like open close application or any task when accessing on homescreen. How to solve it guys?

indroax said:
Hi I got drop fps (lagging) when accessing homescreen. Like open close application or any task when accessing on homescreen. How to solve it guys?
Click to expand...
Click to collapse
Try flashing a different kernel (with A12 support) and see if it helps. Eg:- Elasticsperf, Electroperf, Overdose

Thank you for the recommendation. Anyway, I prefer not using custom kernel at the moment. Will patiently wait for the new update

checksamir said:
@jai_91
One observation on 4G calling - phone earpiece sound happens to be too low despite the volume is set to max in setting.
View attachment 5450303
Click to expand...
Click to collapse
call volume itself not working or sound is low?

indroax said:
Thank you for the recommendation. Anyway, I prefer not using custom kernel at the moment. Will patiently wait for the new update
Click to expand...
Click to collapse
u can use custom kernel , and update will come with a bunch of changes sooon