Related
Flash from recovery. (BACKUP first!)
http://forum.xda-developers.com/showpost.php?p=42689559&postcount=3
Welcome back...
Sent from my XT907 using xda app-developers app
For the noobs, what does this do? Any by "noobs" I specifically mean "me.
Sent from my Droid Razr M using xda app-developers app
It's the radio from the new update... For me I saw better reception in 3g only areas but I flashed the old radio back as in my house it couldn't decide if it wanted 3g or 4g causing data drops and what not...
Sent from my XT907 using xda app-developers app
ezknives said:
It's the radio from the new update... For me I saw better reception in 3g only areas but I flashed the old radio back as in my house it couldn't decide if it wanted 3g or 4g causing data drops and what not...
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Does it give better reception for HSDPA+ aswel ?
Here in Bolivia the signal is anything but stable at times... I'm wondering if it will help =\
SrPintas said:
Does it give better reception for HSDPA+ aswel ?
Here in Bolivia the signal is anything but stable at times... I'm wondering if it will help =\
Click to expand...
Click to collapse
Is your bootloader unlocked? Backup & try it.
aviwdoowks said:
Is your bootloader unlocked? Backup & try it.
Click to expand...
Click to collapse
Indeed it is
I'm about to make a fresh install I might aswell give it a go ^^
So I gave it a go...
It got even worse, it can't keep data connection on stable.
I'm writing this runing because the signal might drop anytime --'
I installed it thinking it would get reverted when I reinstall the AOKP Rom I've been using. Well... the signal is dropping all the time! It doesn't even stay connected 90% of the time, I get the H+ symbol for a second and it drops.
So I'm thinking that the ROMs don't touch the radio? Even if I installed fresh the AOKP Rom I was using b4, the radio stuff is still the new one?
If so, how do I revert. I didn't backup because I thought it would get reverted when I reinstall the Rom.
SrPintas said:
So I gave it a go...
It got even worse, it can't keep data connection on stable.
I'm writing this runing because the signal might drop anytime --'
I installed it thinking it would get reverted when I reinstall the AOKP Rom I've been using. Well... the signal is dropping all the time! It doesn't even stay connected 90% of the time, I get the H+ symbol for a second and it drops.
So I'm thinking that the ROMs don't touch the radio? Even if I installed fresh the AOKP Rom I was using b4, the radio stuff is still the new one?
If so, how do I revert. I didn't backup because I thought it would get reverted when I reinstall the Rom.
Click to expand...
Click to collapse
This is ...94 latest. I have ...78 previous too at my goodies, but in the text of post 1.
aviwdoowks said:
This is ...94 latest. I have ...78 previous too at my goodies.
Click to expand...
Click to collapse
Life saver!
Thank You I'll give it a go and see if my signal goes back to how it was =P
Am I right thinking flashing a ROM doesn't change the radio?
SrPintas said:
Life saver!
Thank You I'll give it a go and see if my signal goes back to how it was =P
Am I right thinking flashing a ROM doesn't change the radio?
Click to expand...
Click to collapse
It varies.
aviwdoowks said:
It varies.
Click to expand...
Click to collapse
I'm sorry to be a pain in the ass... I can't find the old radio in your recovery goodies post =\
Am I looking in the wrong place?
---------- Post added at 01:09 AM ---------- Previous post was at 01:05 AM ----------
"Restore to stock:
I reworked the 9.8.1Q-78 xml to give cwmr, bootlogo fix & root. Restore/Upgrade.
http://forum.xda-developers.com/show....php?t=2391641 "
is that it?
SrPintas said:
I'm sorry to be a pain in the ass... I can't find the old radio in your recovery goodies post =\
Am I looking in the wrong place?
---------- Post added at 01:09 AM ---------- Previous post was at 01:05 AM ----------
"Restore to stock:
I reworked the 9.8.1Q-78 xml to give cwmr, bootlogo fix & root. Restore/Upgrade.
http://forum.xda-developers.com/show....php?t=2391641 "
is that it?
Click to expand...
Click to collapse
You may need that too. but
my signature links to http://205.196.123.79/enfc9t0cjpog/06j4ygdmdhxlm22/xt907-98.18.78p-radio.zip
aviwdoowks said:
You may need that too. but
my signature links to http://205.196.123.79/enfc9t0cjpog/06j4ygdmdhxlm22/xt907-98.18.78p-radio.zip
Click to expand...
Click to collapse
I can't find that in your signature =|
Plus that link ain't working for me =(
SrPintas said:
I can't find that in your signature =|
Plus that link ain't working for me =(
Click to expand...
Click to collapse
Try it again & once @ media fire, reload
ah thanks
it wasn't even opening MediaFire before, a problem on my end probably. my internet connection is dodgy at best at the moment
Question: can I flash the new radio if I have locked bootloader?
I still have issues with 3g connectivity here in Spain with Movistar operator: 3g connection disables randomly data and voice signals. So I´m forced to use only GSM, and turn to 3g when needed.
I would like to try to flash this new radio to see if there could be a patch inside to solve this issue, but I have 2 questions:
Can I do it with locked bootloader using safestrap?
If things get worse, would restoring a complete backup also restore the radio I had?
Thanks in advance
errotaxar said:
I still have issues with 3g connectivity here in Spain with Movistar operator: 3g connection disables randomly data and voice signals. So I´m forced to use only GSM, and turn to 3g when needed.
I would like to try to flash this new radio to see if there could be a patch inside to solve this issue, but I have 2 questions:
Can I do it with locked bootloader using safestrap?
If things get worse, would restoring a complete backup also restore the radio I had?
Thanks in advance
Click to expand...
Click to collapse
Yes to your stock slot.
Yes to revert by restoring.
Also the previous radio is in my stickys : recovery goodies.
Flashed new radio
aviwdoowks said:
Yes to your stock slot.
Yes to revert by restoring.
Also the previous radio is in my stickys : recovery goodies.
Click to expand...
Click to collapse
Thanks a lot. I´ve just flashed the new radio, after having made a complete backup. Let´s see what happens. I´ve put the settings again on GSM/UMTS. Let´s wait.
Thanks again in any case and regards
---------- Post added at 03:12 PM ---------- Previous post was at 02:52 PM ----------
No way. Still the same problem with the new radio. I can only use "GSM only" connection if I want the signal not to be cut.
Desperating.
My Galaxy Nexus, it is suddenly disconnected. I am not even able to make or receive phone calls. My phone will show no bars, no 3G/4G indication, etc. I have tried to reboot, up to another ROM stock rom android 4.3 from google. But nothing have done. It's not working.
Could anyone help me? Thanks a lot
p/s: I tried to used ****docomo to unlock my phone but it's all the same.
polymorphism said:
My Galaxy Nexus, it is suddenly disconnected. I am not even able to make or receive phone calls. My phone will show no bars, no 3G/4G indication, etc. I have tried to reboot, up to another ROM stock rom android 4.3 from google. But nothing have done. It's not working.
Could anyone help me? Thanks a lot
p/s: I tried to used ****docomo to unlock my phone but it's all the same.
Click to expand...
Click to collapse
did docomo still work??
try flash back stock's radio.img & boot.img.
maybe driver issues here.
memaro_maro said:
did docomo still work??
try flash back stock's radio.img & boot.img.
maybe driver issues here.
Click to expand...
Click to collapse
Thanks for your reply, docomo didn't work. How can i flash back stock's radio.img? I have tried http://forum.xda-developers.com/galaxy-nexus/general/guide-restore-to-stock-unbrick-galaxy-t2065470 Restore to Stock
Thanks
polymorphism said:
Thanks for your reply, docomo didn't work. How can i flash back stock's radio.img? I have tried http://forum.xda-developers.com/galaxy-nexus/general/guide-restore-to-stock-unbrick-galaxy-t2065470 Restore to Stock
Thanks
Click to expand...
Click to collapse
your phone still work, not brick. try adb & fasboot.
im using i9250xxlj01 version right now. dont know about your country.
[REF] [HOW-TO] [GSM & CDMA] Official Google OTA update URLs -- Latest: JWR66Y / 4.3 - http://forum.xda-developers.com/showthread.php?t=1419170
---------- Post added at 03:29 PM ---------- Previous post was at 03:09 PM ----------
polymorphism said:
Thanks for your reply, docomo didn't work. How can i flash back stock's radio.img? I have tried http://forum.xda-developers.com/galaxy-nexus/general/guide-restore-to-stock-unbrick-galaxy-t2065470 Restore to Stock
Thanks
Click to expand...
Click to collapse
radio.img here..??
http://forum.xda-developers.com/galaxy-nexus/development/ref-galaxy-nexus-gt-i9250-baseband-t1405345
memaro_maro said:
your phone still work, not brick. try adb & fasboot.
im using i9250xxlj01 version right now. dont know about your country.
[REF] [HOW-TO] [GSM & CDMA] Official Google OTA update URLs -- Latest: JWR66Y / 4.3 - http://forum.xda-developers.com/showthread.php?t=1419170
---------- Post added at 03:29 PM ---------- Previous post was at 03:09 PM ----------
radio.img here..??
http://forum.xda-developers.com/galaxy-nexus/development/ref-galaxy-nexus-gt-i9250-baseband-t1405345
Click to expand...
Click to collapse
Thanks for your links, but my phone still not work I have tried to reboot, flash radio.img, but when i choose and network operator, a message is showed "can not connect... try again later" or "selected network not available"
polymorphism said:
Thanks for your links, but my phone still not work I have tried to reboot, flash radio.img, but when i choose and network operator, a message is showed "can not connect... try again later" or "selected network not available"
Click to expand...
Click to collapse
correct radio installed ? what the previous radio version? need to try in error, choose the best radio for u.
okay.. after all network settings correctly check, still got issues. that means, you need to return to stock. phone wt network issues really s***.
return to stock first, 4.3 was good. still got ota & supported by google??
Hello I was rooting my Moto g6 play and made the awful mistake of not backing up efs partition ( I know Dumb). I got it all done and booted up and now unknown imei. I was wondering if there where any tech savvy people on here that would know how to fix this problem. I know the Imei and if I fastboot getvar I can see the iemi. Plzz help thanks.
dill902 said:
Hello I was rooting my Moto g6 play and made the awful mistake of not backing up efs partition ( I know Dumb). I got it all done and booted up and now unknown imei. I was wondering if there where any tech savvy people on here that would know how to fix this problem. I know the Imei and if I fastboot getvar I can see the iemi. Plzz help thanks.
Click to expand...
Click to collapse
Just flash stock firmware. thats a pretty big mistake to make lol I'm pretty sure I made it quite clear in my guide to backup at least 2 or 3 times. But just flash stock firmware using the commands at the bottom of my guide. Even if the bootloader is locked the commands will work to reflash it still. The need links for stock firmware is also in the guide. And I will say this. If you took the newest update before rooting then you will have to wait for that firmware to be uploaded because its not uploaded yet.
ninjakira said:
Just flash stock firmware. thats a pretty big mistake to make lol I'm pretty sure I made it quite clear in my guide to backup at least 2 or 3 times. But just flash stock firmware using the commands at the bottom of my guide. Even if the bootloader is locked the commands will work to reflash it still. The need links for stock firmware is also in the guide. And I will say this. If you took the newest update before rooting then you will have to wait for that firmware to be uploaded because its not uploaded yet.
Click to expand...
Click to collapse
Thanks man and i know im kicking myself. would you happen to know twhat the newest update is?
dill902 said:
Thanks man and i know im kic,king myself. would you happen to know twhat the newest update is?
Click to expand...
Click to collapse
The newest build is only a few days old so it will be nearly impossible to find online. And it has a different baseband and radio than the previous build. But the October update is OCP27.91-150
As long as the imei isn't zero you should be able to get service back. I had the same issue when I flashed an older firmware like a moron. But when I took the update again, I got service back. I don't recommend it because I may have just been lucky, but no matter what don't flash the gpt, asdspo(?) And bootloader with the older firmware. It'll mess your life up.
Ok i guess ill have to wait it out. Tried to flash stock and still unknown imei and no base band version so guessing it was updated. Thank guys!
dill902 said:
Ok i guess ill have to wait it out. Tried to flash stock and still unknown imei and no base band version so guessing it was updated. Thank guys!
Click to expand...
Click to collapse
Try taking the update again over WiFi if you can. You shouldn't have an issue as long as you're back to stock. But the update is only 3 days old so you may have a chance.
---------- Post added at 04:44 AM ---------- Previous post was at 04:25 AM ----------
ninjakira said:
Just flash stock firmware. thats a pretty big mistake to make lol I'm pretty sure I made it quite clear in my guide to backup at least 2 or 3 times. But just flash stock firmware using the commands at the bottom of my guide. Even if the bootloader is locked the commands will work to reflash it still. The need links for stock firmware is also in the guide. And I will say this. If you took the newest update before rooting then you will have to wait for that firmware to be uploaded because its not uploaded yet.
Click to expand...
Click to collapse
@ninjakira Would my modem.img backup be of any use here? Or anything else? I don't know what is stored where.
Starkiller2 said:
Try taking the update again over WiFi if you can. You shouldn't have an issue as long as you're back to stock. But the update is only 3 days old so you may have a chance.
---------- Post added at 04:44 AM ---------- Previous post was at 04:25 AM ----------
@ninjakira Would my modem.img backup be of any use here? Or anything else? I don't know what is stored where.
Click to expand...
Click to collapse
Idk man i try to update and says its upto date i have the xti922-9 says im on OCP27.91-62
dill902 said:
Idk man i try to update and says its upto date i have the xti922-9 says im on OCP27.91-62
Click to expand...
Click to collapse
Ok so mine won't help then. I'm XT1922-7.
Starkiller2 said:
Try taking the update again over WiFi if you can. You shouldn't have an issue as long as you're back to stock. But the update is only 3 days old so you may have a chance.
---------- Post added at 04:44 AM ---------- Previous post was at 04:25 AM ----------
@ninjakira Would my modem.img backup be of any use here? Or anything else? I don't know what is stored where.
Click to expand...
Click to collapse
At this point no it's gonna need a full reflash of the firmware. I was having issues with my service and went and flashed the OEM file from the 2nd update through fastboot and did the erase carrier command and got my service fixed. Could try that.
---------- Post added at 05:22 AM ---------- Previous post was at 05:14 AM ----------
dill902 said:
Idk man i try to update and says its upto date i have the xti922-9 says im on OCP27.91-62
Click to expand...
Click to collapse
If you have the xt1922-9 then that means you have the att version if I'm not mistaken. If so just go to the links in my guide for stock firmware in the att folder. It has both the firmware your on plus the updated firmware from September which is ocp27.91-62-3 plus my guide will help you achieve root. Just please read it all
ninjakira said:
At this point no it's gonna need a full reflash of the firmware. I was having issues with my service and went and flashed the OEM file from the 2nd update through fastboot and did the erase carrier command and got my service fixed. Could try that.
---------- Post added at 05:22 AM ---------- Previous post was at 05:14 AM ----------
If you have the xt1922-9 then that means you have the att version if I'm not mistaken. If so just go to the links in my guide for stock firmware in the att folder. It has both the firmware your on plus the updated firmware from September which is ocp27.91-62-3 plus my guide will help you achieve root. Just please read it all
Click to expand...
Click to collapse
I flashed bout those firmwares and still nothing i dont understand whats going on or if im messing something up somewhere in the process. It flashes an everything seems to be ok other than the Imei unknown which causes the phone not to read my sim card if im not mistaken. Thanks for taking the time to try and help.
Starkiller2 said:
The newest build is only a few days old so it will be nearly impossible to find online. And it has a different baseband and radio than the previous build. But the October update is OCP27.91-150.
Click to expand...
Click to collapse
Baseband is software. Radio is a piece of hardware. The piece of hardware that gets your carrier's signal. It can't be upgraded without physically altering the phone. Even then it would need to be the same exact radio because the stock drives probably wouldn't work, and the chances of a dev making a version for 1 person with a different hardware would be slim to none.
Starkiller2 said:
@ninjakira Would my modem.img backup be of any use here? Or anything else? I don't know what is stored where.
Click to expand...
Click to collapse
If you want him to have your Imei number, you could but thats not a good idea.
Xplorer4x4 said:
Baseband is software. Radio is a piece of hardware. The piece of hardware that gets your carrier's signal. It can't be upgraded without physically altering the phone. Even then it would need to be the same exact radio because the stock drives probably wouldn't work, and the chances of a dev making a version for 1 person with a different hardware would be slim to none.
If you want him to have your Imei number, you could but thats not a good idea.
Click to expand...
Click to collapse
Thanks for correcting me. I'll be sure not to try again.
So what you guys are saying is I f-ed up and need to buy a new phone? Lol
dill902 said:
So what you guys are saying is I f-ed up and need to buy a new phone? Lol
Click to expand...
Click to collapse
Try flashing stock firmware. If that doesn't work there are other options still.
Sent from my Moto G6 Plus using XDA Labs
Xplorer4x4 said:
Try flashing stock firmware. If that doesn't work there are other options still.
Click to expand...
Click to collapse
Thanks I flashed every rom for my model and still nothing. Driving me crazy have to use an old junker phone till I find a solution lol
dill902 said:
Thanks I flashed every rom for my model and still nothing. Driving me crazy have to use an old junker phone till I find a solution lol
Click to expand...
Click to collapse
You were flashing a gsi not a rom. Even then a rom and even less so a gsi, doesn't contain all the same data as what stock does.
Sent from my Moto G6 Plus using Tapatalk
Xplorer4x4 said:
You were flashing a gsi not a rom. Even then a rom and even less so a gsi, doesn't contain all the same data as what stock does.
Click to expand...
Click to collapse
O ok well can you point me in the right direction to download the rom? Or whatever I need to download.
Starkiller2 said:
The newest build is only a few days old so it will be nearly impossible to find online. And it has a different baseband and radio than the previous build. But the October update is OCP27.91-150
As long as the imei isn't zero you should be able to get service back. I had the same issue when I flashed an older firmware like a moron. But when I took the update again, I got service back. I don't recommend it because I may have just been lucky, but no matter what don't flash the gpt, asdspo(?) And bootloader with the older firmware. It'll mess your life up.
Click to expand...
Click to collapse
Hello, as a bigger moron i flashed an older firmware because the networks were going nuts ( mobile data didn't connect even though i had an imei, and wifi and bluetooth just went on and off constantly). Now I don't have IMEI nor wifi(idk why it doen't work to get an ota update). What should I do?
I have a Moto G6 plus RETAR (Argentina) and the new update is not online because it went online today in the morning.
Thank you in advance
PD: I realized this thread is for the moto g6 play, anyway i believe you colud help me, plz I am desesperate
---------- Post added at 01:52 AM ---------- Previous post was at 01:46 AM ----------
Xplorer4x4 said:
You were flashing a gsi not a rom. Even then a rom and even less so a gsi, doesn't contain all the same data as what stock does.
Sent from my Moto G6 Plus using Tapatalk
Click to expand...
Click to collapse
Hello, as a moron i flashed an older firmware because the networks were going nuts ( mobile data didn't connect even though i had an imei, and wifi and bluetooth just went on and off constantly). Now I don't have IMEI nor wifi (idk why it doesn't work, to get an ota update). What should I do?
I have a Moto G6 plus RETAR (Argentina) and the new update is not online because it went online today in the morning.
Thank you in advance
PD: I realized this thread is for the moto g6 play, anyway i believe you colud help me, plz I am desesperat
Hello
I'm having an issue where the network icon in the statusbar is changing every few seconds. from completely empty bars to almost full. never all the way full. And this is with 4g.
I tried switching to 3g (same problem) and 2g and with 2g I get full signal but realy that's not an option, too slow internet etc..
Thankyou in advance.
Try the factory reset!
You will lose all data and settings.
Gumka1977 said:
Try the factory reset!
You will lose all data and settings.
Click to expand...
Click to collapse
Okay I just tried that, didn't work.
Have you tried updating the software to the latest version?
saedkebbeh said:
Have you tried updating the software to the latest version?
Click to expand...
Click to collapse
Yes, it is on android 9. System is up-to-date. Patch 1 april 2019 it says.
Silverstryfe said:
Yes, it is on android 9. System is up-to-date. Patch 1 april 2019 it says.
Click to expand...
Click to collapse
I have read that if you install stock firmware through MiFlash (reinstall the firmware) the problem will be solved
---------- Post added at 08:18 PM ---------- Previous post was at 08:14 PM ----------
I bought the phone last Saturday, at first I noticed that the signal on the 2nd Sim comes and goes, but after the update, for now, everything seems to be fine, I hope you get your issue sorted out
saedkebbeh said:
I have read that if you install stock firmware through MiFlash (reinstall the firmware) the problem will be solved
---------- Post added at 08:18 PM ---------- Previous post was at 08:14 PM ----------
I bought the phone last Saturday, at first I noticed that the signal on the 2nd Sim comes and goes, but after the update, for now, everything seems to be fine, I hope you get your issue sorted out
Click to expand...
Click to collapse
So it is not a phone problem but a software problem from android 9? And by after the update you mean by reinstalling that firmware?
Silverstryfe said:
So it is not a phone problem but a software problem from android 9? And by after the update you mean by reinstalling that firmware?
I'm not sure if I want to lose my warrenty this fast by rooting it already though.. Realy no other way to fix it?
Click to expand...
Click to collapse
I didn't say anything about rooting, just reinstall the firmware using MiFlash
saedkebbeh said:
I didn't say anything about rooting, just reinstall the firmware using MiFlash
Click to expand...
Click to collapse
Ah it's not the same? My bad, sorry I don't know much about this. Can you help me out? I downloaded miflash tool, not sure what to do.
Silverstryfe said:
Ah it's not the same? My bad, sorry I don't know much about this. Can you help me out? I downloaded miflash tool, not sure what to do.
Click to expand...
Click to collapse
Search Google for this, there are many guides about this process
I have been searching the forms and am seeing multiple different answers to the Question, Can the LM-G710ULM ver: V10b be rooted? any final word on this? Thank you
ZKornecki said:
I have been searching the forms and am seeing multiple different answers to the Question, Can the LM-G710ULM ver: V10b be rooted? any final word on this? Thank you
Click to expand...
Click to collapse
As of today, the G710ULM bootloader cannot be unlocked.
I think its possible by remote unlocking.
https://forum.xda-developers.com/lg-v40/how-to/remote-unlocking-bootloader-models-t-t3946648/post79873169#post79873169
mr3p said:
As of today, the G710ULM bootloader cannot be unlocked.
Click to expand...
Click to collapse
Mr3p thanks for the quick response and this agrees with mostly everything I found on line. What's causing my confusion is I have a toggle in Settings/systems/developers options: enable OEM unlock. I can use adb to boot into fastboot without any trouble but the only patched image (patched_boot_10b.img) i have is for LM-710EM ver V10b. I want to make sure it is compatible with 710ulm. my full version number V10b-LAO-COM, Build# OPR1.170623.032. I would appreciate any input you have on this.
thanks
Zb
cheeze.keyk is correct that the G7ULM can be remote unlocked by loading a V35 engineering bootloader in place of your current bootloader. If you are comfortable having someone remotely access your phone via PC then it can be done, see link he referenced. My comments were regarding unlocking via normal LG unlocking process.
I'd have to look up that version number but doesn't match up with G7ULM. Can you do a screen shot where you are seeing it in your phone?
G710 ulm ?
Sure . You can .
At first, please update to 11b, i will show you. If u have telegram. Give me ur info.
mr3p said:
cheeze.keyk is correct that the G7ULM can be remote unlocked by loading a V35 engineering bootloader in place of your current bootloader. If you are comfortable having someone remotely access your phone via PC then it can be done, see link he referenced. My comments were regarding unlocking via normal LG unlocking process.
I'd have to look up that version number but doesn't match up with G7ULM. Can you do a screen shot where you are seeing it in your phone?
Click to expand...
Click to collapse
Hi this is a shared google photos album link https://photos.app.goo.gl/m6bFxHkUUj6bzZR76 with the info you requested. If there is anything else you need, just ask. thanks Zb
ZKornecki said:
Hi this is a shared google photos album link https://photos.app.goo.gl/m6bFxHkUUj6bzZR76 with the info you requested. If there is anything else you need, just ask. thanks Zb
Click to expand...
Click to collapse
Your G710ULM phone is loaded with old G710EM software.
---------- Post added at 04:34 PM ---------- Previous post was at 04:28 PM ----------
ValKyre said:
G710 ulm ?
Sure . You can .
At first, please update to 11b, i will show you. If u have telegram. Give me ur info.
Click to expand...
Click to collapse
11b? Current firmware for G710ULM is G710ULM10j
Is the unlock method you can't discuss here remote bootloader unlocking via v35 bootloader? If there is a way for us to do it ourselves I'm all ears.
mr3p said:
Your G710ULM phone is loaded with old G710EM software.
---------- Post added at 04:34 PM ---------- Previous post was at 04:28 PM ----------
11b? Current firmware for G710ULM is G710ULM10j
Is the unlock method you can't discuss here remote bootloader unlocking via v35 bootloader? If there is a way for us to do it ourselves I'm all ears.
Click to expand...
Click to collapse
.
Sorry . i miss.
It 11g . i can't discuss in here because i need more tester.
Im the first find way root for ulm11b. And then i ask from telegram group for what continue i need do.
And now V35 bootloader dont need anymore. Cause we already have g7ulm bootloader unlock file.
.
My phone is g7 ulm (check imei is sprint version). & now im on android pie 20bEM with root.
mr3p said:
Your G710ULM phone is loaded with old G710EM software.
Click to expand...
Click to collapse
Can I assume that following the procedure for rooting the 710EM will work on my phone?
ZKornecki said:
Can I assume that following the procedure for rooting the 710EM will work on my phone?
Click to expand...
Click to collapse
No it will not work because your phone is a G710ULM just loaded with a different model firmware. My best suggestion would be to restore ULM firmware back on the phone.
mr3p said:
Your G710ULM phone is loaded with old G710EM software.
---------- Post added at 04:34 PM ---------- Previous post was at 04:28 PM ----------
11b? Current firmware for G710ULM is G710ULM10j
Is the unlock method you can't discuss here remote bootloader unlocking via v35 bootloader? If there is a way for us to do it ourselves I'm all ears.
Click to expand...
Click to collapse
mr3p said:
No it will not work because your phone is a G710ULM just loaded with a different model firmware. My best suggestion would be to restore ULM firmware back on the phone.
Click to expand...
Click to collapse
How would I do that, I bought the phone less than a week ago and this is how it came. The security firmware is from May 2018 and LG bridge says it's up to date. Thanks for your help. Zb
ZKornecki said:
How would I do that, I bought the phone less than a week ago and this is how it came. The security firmware is from May 2018 and LG bridge says it's up to date. Thanks for your help. Zb
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg-g7-thinq/how-to/cross-flash-oreo-pie-firmwares-lg-g7-g7-t3915303
You can use LGUP windows app if you are comfortable recovering from failure if it soft bricks otherwise I would advise using command line to flash ULM firmware exactly as described.
---------- Post added at 09:30 PM ---------- Previous post was at 09:07 PM ----------
ValKyre said:
G710 ulm ?
Sure . You can .
At first, please update to 11b, i will show you. If u have telegram. Give me ur info.
Click to expand...
Click to collapse
Please check PM
mr3p said:
https://forum.xda-developers.com/lg-g7-thinq/how-to/cross-flash-oreo-pie-firmwares-lg-g7-g7-t3915303
You can use LGUP windows app if you are comfortable recovering from failure if it soft bricks otherwise I would advise using command line to flash ULM firmware exactly as described.
---------- Post added at 09:30 PM ---------- Previous post was at 09:07 PM ----------
Please check PM
Click to expand...
Click to collapse
It seems this was a unlocked or flashed US sprint phone if a previous life. not sure if it has a stock rom I can flash it with, LGUP seems fairly straight forward but I'm not sure what to flash it with. My IMEI says this model is an LGG710PM. again any suggestions from you would be appreciated.
@ValKyre thank-you for the offer but i'm sorry but I'm not willing to grant remote access.
ZKornecki said:
It seems this was a unlocked or flashed US sprint phone if a previous life. not sure if it has a stock rom I can flash it with, LGUP seems fairly straight forward but I'm not sure what to flash it with. My IMEI says this model is an LGG710PM. again any suggestions from you would be appreciated.
@ValKyre thank-you for the offer but i'm sorry but I'm not willing to grant remote access.
Click to expand...
Click to collapse
Unless I missed something, that's the first you've mentioned that your phone is Sprint model. It may be out there somewhere or you may have better luck searching however I looked for Sprint .kdz a couple of weeks ago but couldn't find one. You haven't mentioned your wireless provider so it's hard to make a recommendation but if you can't locate Sprint model firmware, I would flash the phone with the latest G710ULM firmware as that's the carrier unlocked version and should have the greatest compatibility. I vaguely recall reading someone taking a phone like yours back to a Sprint store where they were able to flash the phone back to Sprint firmware so you might consider trying that also.
mr3p said:
Unless I missed something, that's the first you've mentioned that your phone is Sprint model. It may be out there somewhere or you may have better luck searching however I looked for Sprint .kdz a couple of weeks ago but couldn't find one. You haven't mentioned your wireless provider so it's hard to make a recommendation but if you can't locate Sprint model firmware, I would flash the phone with the latest G710ULM firmware as that's the carrier unlocked version and should have the greatest compatibility. I vaguely recall reading someone taking a phone like yours back to a Sprint store where they were able to flash the phone back to Sprint firmware so you might consider trying that also.
Click to expand...
Click to collapse
@mr3p you're correct I just learned it was sprint model when I went to lg's site to download the firmware to revert it back as you suggested with lgup. It states that sprint, and all the major USA carrier's, can't be flashed. I Will give the 710ULM firm ware a try. I'll let you know how that goes. BTW thank you again for your help, Zb
ZKornecki said:
@mr3p you're correct I just learned it was sprint model when I went to lg's site to download the firmware to revert it back as you suggested with lgup. It states that sprint, and all the major USA carrier's, can't be flashed. I Will give the 710ULM firm ware a try. I'll let you know how that goes. BTW thank you again for your help, Zb
Click to expand...
Click to collapse
@MrP3 thank you for your input, after soft bricking the phone I found the correct DLL for LGUP and was able to upgrade to ver lg710ulm2g. this version still comes with the bootloader unlock option in the developer menu> i'll continue to research/play with it to see if root is possible.
ValKyre said:
.
Sorry . i miss.
It 11g . i can't discuss in here because i need more tester.
Im the first find way root for ulm11b. And then i ask from telegram group for what continue i need do.
And now V35 bootloader dont need anymore. Cause we already have g7ulm bootloader unlock file.
.
My phone is g7 ulm (check imei is sprint version). & now im on android pie 20bEM with root.
Click to expand...
Click to collapse
I am confused. If your phone is Sprint IMEI do you mean that it was a Sprint G7 loaded with ULM software? If your phone is Sprint model are you saying that ULM firmware is the only requirement to achieve root?
---------- Post added at 04:06 PM ---------- Previous post was at 04:02 PM ----------
ValKyre said:
.
Sorry . i miss.
It 11g . i can't discuss in here because i need more tester.
Im the first find way root for ulm11b. And then i ask from telegram group for what continue i need do.
And now V35 bootloader dont need anymore. Cause we already have g7ulm bootloader unlock file.
.
My phone is g7 ulm (check imei is sprint version). & now im on android pie 20bEM with root.
Click to expand...
Click to collapse
ZKornecki said:
@MrP3 thank you for your input, after soft bricking the phone I found the correct DLL for LGUP and was able to upgrade to ver lg710ulm2g. this version still comes with the bootloader unlock option in the developer menu> i'll continue to research/play with it to see if root is possible.
Click to expand...
Click to collapse
lg710ulm2g? Did you see ULM firmware versions here?
mr3p said:
I am confused. If your phone is Sprint IMEI do you mean that it was a Sprint G7 loaded with ULM software? If your phone is Sprint model are you saying that ULM firmware is the only requirement to achieve root?
---------- Post added at 04:06 PM ---------- Previous post was at 04:02 PM ----------
lg710ulm2g? Did you see ULM firmware versions here?
Click to expand...
Click to collapse
I had the J version 9G710ULM10j_00_NAO_US_OP_0219.kdz) but that is what bricked me, the only update that took was [GFI]G710ULM10g_00_NAO_US_OP_0913. I am making the assumption that the same 'LGUP Common DLL' should work regardless kdz file I use. I just can't seem to find a newer firmware file that doesn't stop after 11%.
ZKornecki said:
I had the J version 9G710ULM10j_00_NAO_US_OP_0219.kdz) but that is what bricked me, the only update that took was [GFI]G710ULM10g_00_NAO_US_OP_0913. I am making the assumption that the same 'LGUP Common DLL' should work regardless kdz file I use. I just can't seem to find a newer firmware file that doesn't stop after 11%.
Click to expand...
Click to collapse
Did the failed firmware load occur with the windows app or command line as suggested?