My Galaxy Nexus, it is suddenly disconnected. I am not even able to make or receive phone calls. My phone will show no bars, no 3G/4G indication, etc. I have tried to reboot, up to another ROM stock rom android 4.3 from google. But nothing have done. It's not working.
Could anyone help me? Thanks a lot
p/s: I tried to used ****docomo to unlock my phone but it's all the same.
polymorphism said:
My Galaxy Nexus, it is suddenly disconnected. I am not even able to make or receive phone calls. My phone will show no bars, no 3G/4G indication, etc. I have tried to reboot, up to another ROM stock rom android 4.3 from google. But nothing have done. It's not working.
Could anyone help me? Thanks a lot
p/s: I tried to used ****docomo to unlock my phone but it's all the same.
Click to expand...
Click to collapse
did docomo still work??
try flash back stock's radio.img & boot.img.
maybe driver issues here.
memaro_maro said:
did docomo still work??
try flash back stock's radio.img & boot.img.
maybe driver issues here.
Click to expand...
Click to collapse
Thanks for your reply, docomo didn't work. How can i flash back stock's radio.img? I have tried http://forum.xda-developers.com/galaxy-nexus/general/guide-restore-to-stock-unbrick-galaxy-t2065470 Restore to Stock
Thanks
polymorphism said:
Thanks for your reply, docomo didn't work. How can i flash back stock's radio.img? I have tried http://forum.xda-developers.com/galaxy-nexus/general/guide-restore-to-stock-unbrick-galaxy-t2065470 Restore to Stock
Thanks
Click to expand...
Click to collapse
your phone still work, not brick. try adb & fasboot.
im using i9250xxlj01 version right now. dont know about your country.
[REF] [HOW-TO] [GSM & CDMA] Official Google OTA update URLs -- Latest: JWR66Y / 4.3 - http://forum.xda-developers.com/showthread.php?t=1419170
---------- Post added at 03:29 PM ---------- Previous post was at 03:09 PM ----------
polymorphism said:
Thanks for your reply, docomo didn't work. How can i flash back stock's radio.img? I have tried http://forum.xda-developers.com/galaxy-nexus/general/guide-restore-to-stock-unbrick-galaxy-t2065470 Restore to Stock
Thanks
Click to expand...
Click to collapse
radio.img here..??
http://forum.xda-developers.com/galaxy-nexus/development/ref-galaxy-nexus-gt-i9250-baseband-t1405345
memaro_maro said:
your phone still work, not brick. try adb & fasboot.
im using i9250xxlj01 version right now. dont know about your country.
[REF] [HOW-TO] [GSM & CDMA] Official Google OTA update URLs -- Latest: JWR66Y / 4.3 - http://forum.xda-developers.com/showthread.php?t=1419170
---------- Post added at 03:29 PM ---------- Previous post was at 03:09 PM ----------
radio.img here..??
http://forum.xda-developers.com/galaxy-nexus/development/ref-galaxy-nexus-gt-i9250-baseband-t1405345
Click to expand...
Click to collapse
Thanks for your links, but my phone still not work I have tried to reboot, flash radio.img, but when i choose and network operator, a message is showed "can not connect... try again later" or "selected network not available"
polymorphism said:
Thanks for your links, but my phone still not work I have tried to reboot, flash radio.img, but when i choose and network operator, a message is showed "can not connect... try again later" or "selected network not available"
Click to expand...
Click to collapse
correct radio installed ? what the previous radio version? need to try in error, choose the best radio for u.
okay.. after all network settings correctly check, still got issues. that means, you need to return to stock. phone wt network issues really s***.
return to stock first, 4.3 was good. still got ota & supported by google??
Related
Just FYI to people with the SC-04D. I installed the stock google baseband and ROM images with no problems so far from here:
http://code.google.com/android/nexus/images.html
I had already unlocked the bootloader and rooted my phone with the standard method here:
http://forum.xda-developers.com/showthread.php?t=1362957
After you install the radio and ROM images, and it boots for the first time, it might not connect to the cell network. After a reboot, the APNs will show up, and you can select the appropriate one (spmode) in my case.
The major reasons why I decided to do this are:
1) I finally figured out how to backup my radio image, so I wasn't too afraid of installing the google baseband (which is what was preventing me from installing the stock google ROM in the first place, as Docomo has a custom baseband on their phone)... and,
2) I wanted wireless tethering, which is built into the stock ROMs, but sadly lacking in the Docomo version (not to mention I couldn't get the standard "wireless tether" app to work, nor any others)... and,
3) After two previous Docomo android phones (xperia x10 and galaxy s) being slow to receive updates and being completely unable to participate in all the fun modding action going on due to Docomo proprietary ROM stuff, I wanted to break free of Docomo's cage asap!
------------------------
Added working radio image to OP. MD5: 7E54A9306E97FC6F45EB35B392061477
After doing some quick tests, it seems the stock Google radio.img is much slower than the Docomo one. I got around 300-400 kbps downstream with the stock Google radio img, and over 1400kbps with the Docomo one. Upload seemed unchanged (around 400 kbps).
As others have mentioned in this thread, flashing back to the Docomo radio image after applying a stock Google ROM doesn't impair anything about the ROM, as the main missing feature (built-in tethering) remains.
This might be a silly question - but when changing baseband we don't have to worry about going to non-docomo phone rate for flat data ?
I mean that our flat rate plan works as it should, even changing the baseband ?
I'm looking forward rooting mine as well, as I see much more powerful kernels out there..
could you post your original baseband?
I've extracted and trimmed the radio.img as mentioned in this post:
http://forum.xda-developers.com/showthread.php?t=1382699
I haven't tested flashing the radio.img however.
MD5 for the trimmed radio.img file is A006C61C0B89ED74D1612D602B719469
I also flashed my device with original Google ITL41D image and one minute after boot, I received a OTA ITL41F update. Don't need root to be able to flash it, just unlocked bootloader. I dumped my radio and system image too and I will try go back to docomo firmware later.
Sent from my Galaxy Nexus using XDA App
After playing this weekend with ITL41F rom and baseband XXKK1, I notice:
1) ITL41F rom feels faster than Docomo rom.
2) when reboot the phone, XXKK1 baseband take a long time to find network.
3) baseband XXKK1 switches too much between 3G and HSDPA, turning internet connection slower.
4) SC04D0MKKD baseband locks gps faster and more accurate.
I just flash Docomo baseband back and everything is working great (wireless tether include).
Sent from my Galaxy Nexus using XDA App
@wallslide your trimmed baseband image is not flashable by fastboot yet. You still have to erase some couples lines...;-)
Sent from my Galaxy Nexus using XDA App
so basically.. once u flash the yakju build over the build u have before.. it makes ur phone a yakju in theory correct?
Yeap that is what happened with my device.
Sent from my Galaxy Nexus using XDA App
rabug said:
Yeap that is what happened with my device.
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
and u just reflashed ur original radio after
rabug said:
After playing this weekend with ITL41F rom and baseband XXKK1, I notice:
1) ITL41F rom feels faster than Docomo rom.
2) when reboot the phone, XXKK1 baseband take a long time to find network.
3) baseband XXKK1 switches too much between 3G and HSDPA, turning internet connection slower.
4) SC04D0MKKD baseband locks gps faster and more accurate.
I just flash Docomo baseband back and everything is working great (wireless tether include).
Click to expand...
Click to collapse
What did you use to flash the Docomo baseband back? The trimmed zip from above doesnt seem to work?
fastboot-windows:
writing 'radio'... FAILED (remote: Write Fail)
---------- Post added at 08:29 PM ---------- Previous post was at 08:15 PM ----------
Oops, n/m just trimmed that one down even more, and it worked fine.
demzzy said:
and u just reflashed ur original radio after
Click to expand...
Click to collapse
yes... i keep the original ITL41F from google and reflash docomo baseband. I just don't know if i'm able to get OTA updates again with other baseband...
rabug said:
yes... i keep the original ITL41F from google and reflash docomo baseband. I just don't know if i'm able to get OTA updates again with other baseband...
Click to expand...
Click to collapse
i dont think the baseband should matter
---------- Post added at 08:50 AM ---------- Previous post was at 08:50 AM ----------
you relocked ur device right?
fastboot oem lock
?
Not yet! I flashed Google ITL41D first and got ITL41F OTA update with bootloader unlocked. That's why I think the state of bootloader doesn't matter at all...
Sent from my Galaxy Nexus using XDA App
i think im just gonna bite the bullet when i go home and flash with the google images... i already have my radio for my region backed up...
So let me get this straight.. What package did you flash? Where did you get the yakju version... code.google.com?
And how did you go about flashing it? Because I would love to keep root and my recovery mod because I have a nandroid backup.
I just maybe need some pointers if you guys can help, I would be grateful.
ztm.000 said:
So let me get this straight.. What package did you flash? Where did you get the yakju version... code.google.com?
And how did you go about flashing it? Because I would love to keep root and my recovery mod because I have a nandroid backup.
I just maybe need some pointers if you guys can help, I would be grateful.
Click to expand...
Click to collapse
this post here
wedz said:
This might be a silly question - but when changing baseband we don't have to worry about going to non-docomo phone rate for flat data ?
I mean that our flat rate plan works as it should, even changing the baseband ?
I'm looking forward rooting mine as well, as I see much more powerful kernels out there..
Click to expand...
Click to collapse
Was wondering this as well...
kevink817 said:
What did you use to flash the Docomo baseband back? The trimmed zip from above doesnt seem to work?
fastboot-windows:
writing 'radio'... FAILED (remote: Write Fail)
---------- Post added at 08:29 PM ---------- Previous post was at 08:15 PM ----------
Oops, n/m just trimmed that one down even more, and it worked fine.
Click to expand...
Click to collapse
Would you mind posting the fully trimmed version that worked for you? Has anyone else tried anything else than KK1?
ok. i flashed my dumped system and i'm running Docomo ITL41D_SC04D0MKKD firmware again, just like the first day i got this device. I'm uploading the files now.
md5sums: cb9c4521c59649b3042c031115715152 boot.img
7e54a9306e97fc6f45eb35b392061477 radio-SC04D0MKKD.img
92e45c6813d8e826c203152c77bf275b system-ITL41D-SC04D0MKKD.img
I wiped my device before flash. These are my steps:
fastboot erase system -w
fastboot erase boot
fastboot flash radio radio-SC04D0MKKD.img
fastboot reboot-bootloader
fastboot flash system system-ITL41D-SC04D0MKKD.img
fastboot flash boot boot.img
fastboot reboot
Device will reboot one more time before boot in Setup Wizard and you should be back with your original rom. I posted it just in case needed (insurance purposes maybe?)
Tested only on my own phone. Flash at your own risk!
BOOTLOADER VERSION - PRIMEKJ10 REQUIRED!
My dropbox account have been temporarily suspended, so here other link:
http://www.multiupload.com/QAG898PXM0
ps: added bootloader-primekj10.img and recovery.img
Hi,
Last night I rooted to Android Revolution HD™ 2.1.5 on my GSM Galxay Nexus, the procedure was the same as always nothing strange happened.
But since then I am unable to make or receive a call. I have tried going back to stock rom but still suffer from the same issue.
Any assistance would be greatly appreciated.
xxyondoxx said:
Hi,
Last night I rooted to Android Revolution HD™ 2.1.5 on my GSM Galxay Nexus, the procedure was the same as always nothing strange happened.
But since then I am unable to make or receive a call. I have tried going back to stock rom but still suffer from the same issue.
Any assistance would be greatly appreciated.
Click to expand...
Click to collapse
did you wipe data/cache/dalvik when you flashed the stock rom? and did you try restoring factory images from google (includes recovery, kernel and radio).
ArmanUV said:
did you wipe data/cache/dalvik when you flashed the stock rom? and did you try restoring factory images from google (includes recovery, kernel and radio).
Click to expand...
Click to collapse
Yeah I ran the super wipe as well as clearing the data/cache/dalvik.
I also restored the images from
code[dot]google[dot]com/android/nexus/images[dot]html
Did you actually flash the gsm version? Or did you flash the lte?
wayneb02 said:
Did you actually flash the gsm version? Or did you flash the lte?
Click to expand...
Click to collapse
As far as I can tell it was the GSM.
URL: http://forum.xda-developers.com/showthread.php?t=1361348
File Name: Android_Revolution_HD-Galaxy_Nexus_GSM_2.1.5.zip
xxyondoxx said:
As far as I can tell it was the GSM.
URL: http://forum.xda-developers.com/showthread.php?t=1361348
File Name: Android_Revolution_HD-Galaxy_Nexus_GSM_2.1.5.zip
Click to expand...
Click to collapse
Ok, have you tried a different rom?
Did you flash a different radio?
Have you reflashed the rom?
wayneb02 said:
Ok, have you tried a different rom?
Did you flash a different radio?
Have you reflashed the rom?
Click to expand...
Click to collapse
Re-flashed the rom after a complete wipe. No Effect
Flashed Gummy. No Effect
Flashed just radio-maguro-i9250xxkk1.img from ITL41F. No Effect
That is when I took it all the way back to ITL41F and let it update to ICL53F OTA.
But still no effect.
I really am at a loss.
Did you make a backup before flashing the rom?
Can you text from it? Or browse the internet without using wifi?
wayneb02 said:
Did you make a backup before flashing the rom?
Can you text from it? Or browse the internet without using wifi?
Click to expand...
Click to collapse
Yeah, I have tried to revert to the backup.
Also I can browse on 3G and also text. But as soon as I try and call it times out, and I never receive incoming calls.
EDIT: P.s. Thank for the on-going ideas.
xxyondoxx said:
Yeah, I have tried to revert to the backup.
Also I can browse on 3G and also text. But as soon as I try and call it times out, and I never receive incoming calls.
EDIT: P.s. Thank for the on-going ideas.
Click to expand...
Click to collapse
If you go into settings and into about phone does your phone number show up?
wayneb02 said:
If you go into settings and into about phone does your phone number show up?
Click to expand...
Click to collapse
Phone number is there, -67dBm 23 asu Signal Strength
Only thing that looks odd is Mobile network state - disconnected
Does your IMEI number show up?
Try manually selecting a mobile network in the settings. Or dial *#*#INFO#*#* in the dialer. Then click phone information. Press the : button (aka menu) to change the radio bands to USA. (or Auto)
I stole this from another thread.... See if it works
Still no luck.
I think it might be time to clean wipe to stock again and RMA.
Hello, new to the forum, and new to rooting. Any help would be appreciated and hopefully I will be able to return the favor to others down the road!
I have a Verizon Galaxy Nexus and just unlocked and rooted it Wugs toolkit. I flashed the Android Revolution 2.1.5 ROM following the developers directions however I am having the same problem as xxyondoxx. After flashing the ROM I have no cellular or data connection. Under "About Phone" my phone number does not show up, no network, no IMEI number. Wireless works.
I restored back to the nandroid back-up I created before flashing the Android Revolution ROM and everything is working fine.
How can I get a data connection after flashing the Android Revolution 2.1.5 ROM? Now that I am unlocked and rooted I would like to be able to further customize.
Thanks in advance
isucyclone said:
Hello, new to the forum, and new to rooting. Any help would be appreciated and hopefully I will be able to return the favor to others down the road!
I have a Verizon Galaxy Nexus and just unlocked and rooted it Wugs toolkit. I flashed the Android Revolution 2.1.5 ROM following the developers directions however I am having the same problem as xxyondoxx. After flashing the ROM I have no cellular or data connection. Under "About Phone" my phone number does not show up, no network, no IMEI number. Wireless works.
I restored back to the nandroid back-up I created before flashing the Android Revolution ROM and everything is working fine.
How can I get a data connection after flashing the Android Revolution 2.1.5 ROM? Now that I am unlocked and rooted I would like to be able to further customize.
Thanks in advance
Click to expand...
Click to collapse
Did you flash the wrong version of the rom? gsm instead of cdma?
Yes, I just realized I did. I don't see a download for the CDMA version. Any idea where to find it?
---------- Post added at 06:58 AM ---------- Previous post was at 06:34 AM ----------
isucyclone said:
Yes, I just realized I did. I don't see a download for the CDMA version. Any idea where to find it?
Click to expand...
Click to collapse
Found the LTE link. Here it is if anyone else is looking for it.
http://forum.xda-developers.com/showthread.php?t=1400775
isucyclone said:
Yes, I just realized I did. I don't see a download for the CDMA version. Any idea where to find it?
---------- Post added at 06:58 AM ---------- Previous post was at 06:34 AM ----------
Found the LTE link. Here it is if anyone else is looking for it.
http://forum.xda-developers.com/showthread.php?t=1400775
Click to expand...
Click to collapse
Yeah make sure you try and only get stuff from the cdma android development side
hey guys, like the title says, ive flashed with odin fw 4.1.2 onto my t989d and everything went fine except for the fact that i dont have any signal now, it cuts in and out, when its on it shows no bars and quickly doesnt work again.... i flashed to 4.0.4 and that loaded fine with bars showing, but i really wanted jb for battery saving purposes. im a newb at this and any help would be greatly appreciated! i tried updating with kies from 4.0.4 and it said my firmware was not supported or something... build number is jzo54k.t989uvmc6
baseband is t989dtllg2. i also went into recovery mode, flashed cache and flashed the internal and still the same... please help guys! any help is greatly appreciated!
Try flashing back to an older radio. I I see you are on uvmc6 radio which is the newest.
http://forum.xda-developers.com/showthread.php?t=1895400
there is no spoon.....
I think you need to manually set up your apn settings. I always have to on 4.1.2.
Also, I had to use the new T-Mobile radio, the Telus tlle4 didn't work for me. Hopefully when Telus puts the update out they'll have a new radio. The tlle4 had better reception. The new radio works OK tho.
Sent from my cell phone telephone....
sorry, but how would i go about flashing these radios to my phone? do i have to be root? i really dont want to root or put cwm or anything on my phone... i just want it to be clean t989d official firmware...
I am not sure how you flash a radio if you aren't rooted with cmw or twrp recovery.
You would probably have new radio if you installed stock 4.1.2 and more than likely need to still set up your apn settings manually ....did for Telus anyway.
Just Google "jelly bean add apn settings Telus" or koodo, whatever you're on. The settings after installing stock are wrong.
Sorry, yes you said you have new radio. So should just need the correct apn settings.
Sent from my cell phone telephone....
its not an apn issue, its a radio issue... even when theres no sim i should be get emergency calls only with bars, but i just get a circle with a line across indicating no signal whatsoever.... im trying to flash radios now
killerjay said:
its not an apn issue, its a radio issue... even when theres no sim i should be get emergency calls only with bars, but i just get a circle with a line across indicating no signal whatsoever.... im trying to flash radios now
Click to expand...
Click to collapse
tmobile has a number of good radios in .zip format
if u don't want to root, try flashing with odin
there is a thread with links to tmo radios.
hit thanks if that helped
---------- Post added at 06:49 PM ---------- Previous post was at 06:42 PM ----------
sam.balia1012 said:
tmobile has a number of good radios in .zip format
if u don't want to root, try flashing with odin
there is a thread with links to tmo radios.
hit thanks if that helped
Click to expand...
Click to collapse
one more thing when using odin check Phone not PDA, since u gonna be flashing a modem(radio) file
thank me if it worked:good:
---------- Post added at 06:50 PM ---------- Previous post was at 06:49 PM ----------
killerjay said:
its not an apn issue, its a radio issue... even when theres no sim i should be get emergency calls only with bars, but i just get a circle with a line across indicating no signal whatsoever.... im trying to flash radios now
Click to expand...
Click to collapse
one more thing when using odin check Phone not PDA, since u gonna be flashing a modem(radio) file
thank me if it worked
Hello I was rooting my Moto g6 play and made the awful mistake of not backing up efs partition ( I know Dumb). I got it all done and booted up and now unknown imei. I was wondering if there where any tech savvy people on here that would know how to fix this problem. I know the Imei and if I fastboot getvar I can see the iemi. Plzz help thanks.
dill902 said:
Hello I was rooting my Moto g6 play and made the awful mistake of not backing up efs partition ( I know Dumb). I got it all done and booted up and now unknown imei. I was wondering if there where any tech savvy people on here that would know how to fix this problem. I know the Imei and if I fastboot getvar I can see the iemi. Plzz help thanks.
Click to expand...
Click to collapse
Just flash stock firmware. thats a pretty big mistake to make lol I'm pretty sure I made it quite clear in my guide to backup at least 2 or 3 times. But just flash stock firmware using the commands at the bottom of my guide. Even if the bootloader is locked the commands will work to reflash it still. The need links for stock firmware is also in the guide. And I will say this. If you took the newest update before rooting then you will have to wait for that firmware to be uploaded because its not uploaded yet.
ninjakira said:
Just flash stock firmware. thats a pretty big mistake to make lol I'm pretty sure I made it quite clear in my guide to backup at least 2 or 3 times. But just flash stock firmware using the commands at the bottom of my guide. Even if the bootloader is locked the commands will work to reflash it still. The need links for stock firmware is also in the guide. And I will say this. If you took the newest update before rooting then you will have to wait for that firmware to be uploaded because its not uploaded yet.
Click to expand...
Click to collapse
Thanks man and i know im kicking myself. would you happen to know twhat the newest update is?
dill902 said:
Thanks man and i know im kic,king myself. would you happen to know twhat the newest update is?
Click to expand...
Click to collapse
The newest build is only a few days old so it will be nearly impossible to find online. And it has a different baseband and radio than the previous build. But the October update is OCP27.91-150
As long as the imei isn't zero you should be able to get service back. I had the same issue when I flashed an older firmware like a moron. But when I took the update again, I got service back. I don't recommend it because I may have just been lucky, but no matter what don't flash the gpt, asdspo(?) And bootloader with the older firmware. It'll mess your life up.
Ok i guess ill have to wait it out. Tried to flash stock and still unknown imei and no base band version so guessing it was updated. Thank guys!
dill902 said:
Ok i guess ill have to wait it out. Tried to flash stock and still unknown imei and no base band version so guessing it was updated. Thank guys!
Click to expand...
Click to collapse
Try taking the update again over WiFi if you can. You shouldn't have an issue as long as you're back to stock. But the update is only 3 days old so you may have a chance.
---------- Post added at 04:44 AM ---------- Previous post was at 04:25 AM ----------
ninjakira said:
Just flash stock firmware. thats a pretty big mistake to make lol I'm pretty sure I made it quite clear in my guide to backup at least 2 or 3 times. But just flash stock firmware using the commands at the bottom of my guide. Even if the bootloader is locked the commands will work to reflash it still. The need links for stock firmware is also in the guide. And I will say this. If you took the newest update before rooting then you will have to wait for that firmware to be uploaded because its not uploaded yet.
Click to expand...
Click to collapse
@ninjakira Would my modem.img backup be of any use here? Or anything else? I don't know what is stored where.
Starkiller2 said:
Try taking the update again over WiFi if you can. You shouldn't have an issue as long as you're back to stock. But the update is only 3 days old so you may have a chance.
---------- Post added at 04:44 AM ---------- Previous post was at 04:25 AM ----------
@ninjakira Would my modem.img backup be of any use here? Or anything else? I don't know what is stored where.
Click to expand...
Click to collapse
Idk man i try to update and says its upto date i have the xti922-9 says im on OCP27.91-62
dill902 said:
Idk man i try to update and says its upto date i have the xti922-9 says im on OCP27.91-62
Click to expand...
Click to collapse
Ok so mine won't help then. I'm XT1922-7.
Starkiller2 said:
Try taking the update again over WiFi if you can. You shouldn't have an issue as long as you're back to stock. But the update is only 3 days old so you may have a chance.
---------- Post added at 04:44 AM ---------- Previous post was at 04:25 AM ----------
@ninjakira Would my modem.img backup be of any use here? Or anything else? I don't know what is stored where.
Click to expand...
Click to collapse
At this point no it's gonna need a full reflash of the firmware. I was having issues with my service and went and flashed the OEM file from the 2nd update through fastboot and did the erase carrier command and got my service fixed. Could try that.
---------- Post added at 05:22 AM ---------- Previous post was at 05:14 AM ----------
dill902 said:
Idk man i try to update and says its upto date i have the xti922-9 says im on OCP27.91-62
Click to expand...
Click to collapse
If you have the xt1922-9 then that means you have the att version if I'm not mistaken. If so just go to the links in my guide for stock firmware in the att folder. It has both the firmware your on plus the updated firmware from September which is ocp27.91-62-3 plus my guide will help you achieve root. Just please read it all
ninjakira said:
At this point no it's gonna need a full reflash of the firmware. I was having issues with my service and went and flashed the OEM file from the 2nd update through fastboot and did the erase carrier command and got my service fixed. Could try that.
---------- Post added at 05:22 AM ---------- Previous post was at 05:14 AM ----------
If you have the xt1922-9 then that means you have the att version if I'm not mistaken. If so just go to the links in my guide for stock firmware in the att folder. It has both the firmware your on plus the updated firmware from September which is ocp27.91-62-3 plus my guide will help you achieve root. Just please read it all
Click to expand...
Click to collapse
I flashed bout those firmwares and still nothing i dont understand whats going on or if im messing something up somewhere in the process. It flashes an everything seems to be ok other than the Imei unknown which causes the phone not to read my sim card if im not mistaken. Thanks for taking the time to try and help.
Starkiller2 said:
The newest build is only a few days old so it will be nearly impossible to find online. And it has a different baseband and radio than the previous build. But the October update is OCP27.91-150.
Click to expand...
Click to collapse
Baseband is software. Radio is a piece of hardware. The piece of hardware that gets your carrier's signal. It can't be upgraded without physically altering the phone. Even then it would need to be the same exact radio because the stock drives probably wouldn't work, and the chances of a dev making a version for 1 person with a different hardware would be slim to none.
Starkiller2 said:
@ninjakira Would my modem.img backup be of any use here? Or anything else? I don't know what is stored where.
Click to expand...
Click to collapse
If you want him to have your Imei number, you could but thats not a good idea.
Xplorer4x4 said:
Baseband is software. Radio is a piece of hardware. The piece of hardware that gets your carrier's signal. It can't be upgraded without physically altering the phone. Even then it would need to be the same exact radio because the stock drives probably wouldn't work, and the chances of a dev making a version for 1 person with a different hardware would be slim to none.
If you want him to have your Imei number, you could but thats not a good idea.
Click to expand...
Click to collapse
Thanks for correcting me. I'll be sure not to try again.
So what you guys are saying is I f-ed up and need to buy a new phone? Lol
dill902 said:
So what you guys are saying is I f-ed up and need to buy a new phone? Lol
Click to expand...
Click to collapse
Try flashing stock firmware. If that doesn't work there are other options still.
Sent from my Moto G6 Plus using XDA Labs
Xplorer4x4 said:
Try flashing stock firmware. If that doesn't work there are other options still.
Click to expand...
Click to collapse
Thanks I flashed every rom for my model and still nothing. Driving me crazy have to use an old junker phone till I find a solution lol
dill902 said:
Thanks I flashed every rom for my model and still nothing. Driving me crazy have to use an old junker phone till I find a solution lol
Click to expand...
Click to collapse
You were flashing a gsi not a rom. Even then a rom and even less so a gsi, doesn't contain all the same data as what stock does.
Sent from my Moto G6 Plus using Tapatalk
Xplorer4x4 said:
You were flashing a gsi not a rom. Even then a rom and even less so a gsi, doesn't contain all the same data as what stock does.
Click to expand...
Click to collapse
O ok well can you point me in the right direction to download the rom? Or whatever I need to download.
Starkiller2 said:
The newest build is only a few days old so it will be nearly impossible to find online. And it has a different baseband and radio than the previous build. But the October update is OCP27.91-150
As long as the imei isn't zero you should be able to get service back. I had the same issue when I flashed an older firmware like a moron. But when I took the update again, I got service back. I don't recommend it because I may have just been lucky, but no matter what don't flash the gpt, asdspo(?) And bootloader with the older firmware. It'll mess your life up.
Click to expand...
Click to collapse
Hello, as a bigger moron i flashed an older firmware because the networks were going nuts ( mobile data didn't connect even though i had an imei, and wifi and bluetooth just went on and off constantly). Now I don't have IMEI nor wifi(idk why it doen't work to get an ota update). What should I do?
I have a Moto G6 plus RETAR (Argentina) and the new update is not online because it went online today in the morning.
Thank you in advance
PD: I realized this thread is for the moto g6 play, anyway i believe you colud help me, plz I am desesperate
---------- Post added at 01:52 AM ---------- Previous post was at 01:46 AM ----------
Xplorer4x4 said:
You were flashing a gsi not a rom. Even then a rom and even less so a gsi, doesn't contain all the same data as what stock does.
Sent from my Moto G6 Plus using Tapatalk
Click to expand...
Click to collapse
Hello, as a moron i flashed an older firmware because the networks were going nuts ( mobile data didn't connect even though i had an imei, and wifi and bluetooth just went on and off constantly). Now I don't have IMEI nor wifi (idk why it doesn't work, to get an ota update). What should I do?
I have a Moto G6 plus RETAR (Argentina) and the new update is not online because it went online today in the morning.
Thank you in advance
PD: I realized this thread is for the moto g6 play, anyway i believe you colud help me, plz I am desesperat
Hello
I'm having an issue where the network icon in the statusbar is changing every few seconds. from completely empty bars to almost full. never all the way full. And this is with 4g.
I tried switching to 3g (same problem) and 2g and with 2g I get full signal but realy that's not an option, too slow internet etc..
Thankyou in advance.
Try the factory reset!
You will lose all data and settings.
Gumka1977 said:
Try the factory reset!
You will lose all data and settings.
Click to expand...
Click to collapse
Okay I just tried that, didn't work.
Have you tried updating the software to the latest version?
saedkebbeh said:
Have you tried updating the software to the latest version?
Click to expand...
Click to collapse
Yes, it is on android 9. System is up-to-date. Patch 1 april 2019 it says.
Silverstryfe said:
Yes, it is on android 9. System is up-to-date. Patch 1 april 2019 it says.
Click to expand...
Click to collapse
I have read that if you install stock firmware through MiFlash (reinstall the firmware) the problem will be solved
---------- Post added at 08:18 PM ---------- Previous post was at 08:14 PM ----------
I bought the phone last Saturday, at first I noticed that the signal on the 2nd Sim comes and goes, but after the update, for now, everything seems to be fine, I hope you get your issue sorted out
saedkebbeh said:
I have read that if you install stock firmware through MiFlash (reinstall the firmware) the problem will be solved
---------- Post added at 08:18 PM ---------- Previous post was at 08:14 PM ----------
I bought the phone last Saturday, at first I noticed that the signal on the 2nd Sim comes and goes, but after the update, for now, everything seems to be fine, I hope you get your issue sorted out
Click to expand...
Click to collapse
So it is not a phone problem but a software problem from android 9? And by after the update you mean by reinstalling that firmware?
Silverstryfe said:
So it is not a phone problem but a software problem from android 9? And by after the update you mean by reinstalling that firmware?
I'm not sure if I want to lose my warrenty this fast by rooting it already though.. Realy no other way to fix it?
Click to expand...
Click to collapse
I didn't say anything about rooting, just reinstall the firmware using MiFlash
saedkebbeh said:
I didn't say anything about rooting, just reinstall the firmware using MiFlash
Click to expand...
Click to collapse
Ah it's not the same? My bad, sorry I don't know much about this. Can you help me out? I downloaded miflash tool, not sure what to do.
Silverstryfe said:
Ah it's not the same? My bad, sorry I don't know much about this. Can you help me out? I downloaded miflash tool, not sure what to do.
Click to expand...
Click to collapse
Search Google for this, there are many guides about this process