Develop Bugs

[ROM] Pure LG Experience

Disclaimer:
Always make a backup first!! Flash at your own risk!
We are NOT responsible for anything that may happen to your phone.
We cannot be held responsible for smoke, fire, water, or other natural disasters.
Pure LG Experience​
What You Get
~ Based on Lollipop 13B firmware
~ Setenforce Permissive
~ Rooted Thanks goes to Chainfire SuperUser
~ Fully Debloated Verizon apps
~ Theme engine + Fonts supported
~ MyPlaces Supported
~ Google Cloud Drive activator supported
~ Smart Settings Supported
~ Backup & Restore Supported
~ User Mode Supported
~ Command Center Supported ( Widget )
~ Debugging changed to show more output in logcat ( Features the same dubug output as userdebug mode )
~ Insecure adbd on boot complete ( You still have to confirm your usb RSA though ) thanks to chainfire for the ideal
~ busybox added thanks to stericson binary
~ init.d supported
~ LG Smart world added
~ Few Overlay Changes
~ adb debugging enabled by default ( boot complete )
~ Patched qseecomd binary ( Memory / IO controller )
~ Deodex see notes on page 2
~ Disabled Modified system reporting
~ If system report modified, kdz stock then dd my image over
~ Disabled OTA's
~ Added LG stock browser
Download: FlashFire Install .zip
https://drive.google.com/file/d/0B3ocVtK9s0YrSm1SUGo1Tkx0N3c/view?usp=sharing
Click to expand...
Click to collapse
Guide to Using FlashFire:
http://forum.xda-developers.com/showpost.php?p=64425346&postcount=1
Click to expand...
Click to collapse

Notes:1
To enable HD calling, download myverizon app, activate hd calling then leave cache & /data/data but delete the app out of the data/app. feature stays enabled.
Click to expand...
Click to collapse
Notes:2
I issue the command after pushing files modded / permissions reset, give you an idea if it will work. if not you still have root via command prompt to fix your mistakes. Once fixed the system will boot fine. I find helpful, lot less of kdz restores I do.
setprop ctl.restart zygote
Click to expand...
Click to collapse
Notes:3 Using flashfire on my device
http://forum.xda-developers.com/showpost.php?p=64425346&postcount=1
Click to expand...
Click to collapse
Notes:4 Triggers LG Security
/# Non Booting deodex /system/app apks if modified
#
/system/app/LGATCMDService
/system/app/LGVZWStartupwizard
#
/# Non Booting deodex /system/priv-app apks if modified
#
Click to expand...
Click to collapse
Notes 5: Disabling Modified System
Rename or delete.
/system/bin/rctd
Click to expand...
Click to collapse
Download attached rct.cfg file and replace current file and repair permissions.
/persist/rct.cfg
Click to expand...
Click to collapse
Reporting will now show Official in all spectrum
Notes 6: Multi-user Mode - Add these lines to the /system/build.prop
fw.max_users=3
fw.show_multiuserui=1
Click to expand...
Click to collapse
Notes 7: Enable Multi-Window mode /system/build.prop
persist.splitwindow.support_all=true
Click to expand...
Click to collapse
Notes 8: Enable ABD and DeBugging on first boot /system/build.prop
sys.usb.state=auto_conf,adb
persist.service.adb.enable=1
persist.service.debuggable=1
Click to expand...
Click to collapse
Notes 8: Custom script apk_delete.sh - Location -> /system/vendor/bin/apk_delete.sh.
This file does not exist in our builds, but is enabled via boot.img init.rc's, You can place anything you want here. Does not run on first boot and each modification to the file will require 2 reboots, after which you shutdown / startup like normal scripts.
To Enable apk_delete.sh add this line to /system/build.prop then add your custom script to Location -> /system/vendor/bin/apk_delete.sh
persist.data.sbp.update=1
Click to expand...
Click to collapse

Thank You Eugene for this initiative
Sent from my VS986 using Tapatalk

Rooted?
Enviado desde mi VS986 mediante Tapatalk

CyberManiaK said:
Rooted?
Enviado desde mi VS986 mediante Tapatalk
Click to expand...
Click to collapse
Yes it's rooted.
*EDIT*
12/21/15
I should have the flashfire img put together today with instruction on how to flash it.

OP Updated for flashfire & guide

Has anyone tried this?
Sent from my VS986 using Tapatalk

I have. So far its great! I installed flash fire style. Everything went fine. Only thing now is in trying to get advanced calling to work again. I already had it enabled. I did what OP suggested but nothing is working. Other than that its nice to have smart settings!

hschreibz7 said:
I have. So far its great! I installed flash fire style. Everything went fine. Only thing now is in trying to get advanced calling to work again. I already had it enabled. I did what OP suggested but nothing is working. Other than that its nice to have smart settings!
Click to expand...
Click to collapse
Did you download myverizon app and then activate hd calling before deleting out of /data/app?
I'll look into this issue in the morning.

All is working fine except hd calling want activate. Downloaded my verizon app and then went to settings avanced calling to activate but get the process.com.Android.settings has stopped. I've done everything from wipe settings and apps to flashing again and nothing helps. Any suggestions?
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
eugene373 said:
Did you download myverizon app and then activate hd calling before deleting out of /data/app?
I'll look into this issue in the morning.
Click to expand...
Click to collapse
Just saw your post. Same problem here with hd calling

I'll have a look at the settings.apk does anyone have the stock LGSettings.apk with odex files. I'd have to flash back to stock at this point.
rsb321 said:
All is working fine except hd calling want activate. Downloaded my verizon app and then went to settings avanced calling to activate but get the process.com.Android.settings has stopped. I've done everything from wipe settings and apps to flashing again and nothing helps. Any suggestions?
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
Just saw your post. Same problem here with hd calling
Click to expand...
Click to collapse

eugene373 said:
I'll have a look at the settings.apk does anyone have the stock LGSettings.apk with odex files. I'd have to flash back to stock at this point.
Click to expand...
Click to collapse
I don't but I've got the stock kdz ready to flash. I'll pull it and send to you then once we get it figured out I'll reflash your Rom .
One thing I've noticed is my hd calling says click here to turn it off although I've verified through 4g Data not working on calls and the hd notification not showing up on calls to my wife that it definatley is not working. I also know that it for sure worked on stock so it's something that's causing settings to stop. Soon as I get flashed to stock I'll upload settings.apk

See the errors now, I'll have it fix soon.

eugene373 said:
See the errors now, I'll have it fix soon.
Click to expand...
Click to collapse
Ok after 2 hours of messing with adb saying my device is offline I give up...adb worked fine but this is the first time using it with Windows 10 so I'm guessing it's got drivers messed up which is causing it to not issue a device authorization attempt which means I can't use adb right now.....
I'll patiently wait for your fix. Thank you for the help

Sometimes I have the same issue with Windows, not sure of the exact problem. But restarting Windows and phone while usb is disconnected ussally fixes the issue for no apparent reason.
rsb321 said:
Ok after 2 hours of messing with adb saying my device is offline I give up...adb worked fine but this is the first time using it with Windows 10 so I'm guessing it's got drivers messed up which is causing it to not issue a device authorization attempt which means I can't use adb right now.....
I'll patiently wait for your fix. Thank you for the help
Click to expand...
Click to collapse

I want to know after flashing this img my non Verizon CDMA carrier's 3G settings are gone, and I can't connect anymore through 3G.
It needs 3G settings reprogramming , what could caused this issue ?
Knowing that I flashed 13b KDZ on top of 10B and then flashed another 13B rooted img and nothing like that happened...
Sent from my VS986 using Tapatalk

Have the hd calling fixed, DADER can you send me a screen shot?
*Edit*
I did a factory wipe and have some of the issues at hand now, working on them to day / now... Fixing the issues.
Edit-2 adb error
I've fixed Root adbd insecure. it now waits to see if you have rsa key before running.
Edit-3
Think I found the fix for VVm not working. fixed now
edit-4
I'll try and have it uploaded by X-mas morning

eugene373 said:
Have the hd calling fixed, DADER can you send me a screen shot?
*Edit*
I did a factory wipe and have some of the issues at hand now, working on them to day / now... Fixing the issues.
Click to expand...
Click to collapse
Any chance of working VVM? Just wondering because even installing it won't connect to the service.

eugene373 said:
Have the hd calling fixed, DADER can you send me a screen shot?
Click to expand...
Click to collapse
Unfortunately I am not a Verizon user, I do use my phone on a Yemeni CDMA carrier called "Yemen Mobile" which it doesn't has any features like HD calling, only 3G network (EV-DO) [emoji3] .
Please tell me what to take a screenshot for and I will be happy to take it.
Thanks
Sent from my VS986 using Tapatalk

Working great so far. Everything works as of now , including HD calling (Note#1 in thread post#2 worked for me). Great job and thanks again!

Kingroot - how to remove it from my AFTV?

Hi.
In the past few month, I have used my AFTV to watch KODI streams.
Now, I have decided to root it ( for USB inputs enablement ).
Problem now, The streams cut off after 20-25 minutes.
one post told me to remove KINGROOT.
I tried to follow youtube regular tutorials, with no help.
I have connected a USB mouse in order to have "free hand" - kingroot options are still don't seems to work.
http://forum.kodi.tv/showthread.php?tid=264089
http://freeandroidroot.com/how-to-uninstall-kinguser-and-unroot-your-android-device/
https://www.youtube.com/watch?v=Wf2eMZV1OaQ
any help would be grateful

tobenary said:
Hi.
In the past few month, I have used my AFTV to watch KODI streams.
Now, I have decided to root it ( for USB inputs enablement ).
Problem now, The streams cut off after 20-25 minutes.
one post told me to remove KINGROOT.
I tried to follow youtube regular tutorials, with no help.
I have connected a USB mouse in order to have "free hand" - kingroot options are still don't seems to work.
http://forum.kodi.tv/showthread.php?tid=264089
http://freeandroidroot.com/how-to-uninstall-kinguser-and-unroot-your-android-device/
https://www.youtube.com/watch?v=Wf2eMZV1OaQ
any help would be grateful
Click to expand...
Click to collapse
What version of Kingroot have you used? Removal is under settings (top right hand corner):
V4.1
1. Open KingUser and enter "Settings" menu ( top right of home screen)
2. Enter "Root authorization setting " (second one)
3. You can find "Remove Root permission" option (fourth one)
4. Click it, and KingUser will be removed automatically
V4.8
1. Open KingUser and enter "Sittings" menu ( top right of home screen)
2. You can find "Uninstall" option.
3. Click it, and KingUser will be removed automatically

bula1ca said:
What version of Kingroot have you used? Removal is under settings (top right hand corner):
V4.1
1. Open KingUser and enter "Settings" menu ( top right of home screen)
2. Enter "Root authorization setting " (second one)
3. You can find "Remove Root permission" option (fourth one)
4. Click it, and KingUser will be removed automatically
V4.8
1. Open KingUser and enter "Sittings" menu ( top right of home screen)
2. You can find "Uninstall" option.
3. Click it, and KingUser will be removed automatically
Click to expand...
Click to collapse
whatever bloat kingroot has added to it, I'm sure the ability to remove more bloat is there with root.

I cannot press the "Setting" button

tobenary said:
I cannot press the "Setting" button
Click to expand...
Click to collapse
download wukong remote, that is what I used

download wukong remote, that is what I used
Click to expand...
Click to collapse
Thanks, will try it.
BUT, a regular USB mouse is not enough?

tobenary said:
Thanks, will try it.
BUT, a regular USB mouse is not enough?
Click to expand...
Click to collapse
It will not work.

I have not tried kingroot on my stick. However this replaced kingroot with superuser on my ForgeTV
http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html?m=1
Edit: resist temptation, don't try this. May brick device like supersume

goodhur said:
I have not tried kingroot on my stick. However this replaced kingroot with superuser on my ForgeTV
http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html?m=1
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Not sure about this method but replacing kingroot with supersume causes brick.

goodhur said:
I have not tried kingroot on my stick. However this replaced kingroot with superuser on my ForgeTV
http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html?m=1
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I would not try this & like Bula1ca says below alot of people who tried this method have bricked after the first reboot of there device
bula1ca said:
Not sure about this method but replacing kingroot with supersume causes brick.
Click to expand...
Click to collapse

deanr1977 said:
I would not try this & like Bula1ca says below alot of people who tried this method have bricked after the first reboot of there device
Click to expand...
Click to collapse
Agreed. I didn't know they were bricking, sorry. I would guess they use a similar strategy to delete Kingroot. So it would probably end the same way. If a recovery is in the works I'd wait.

goodhur said:
Agreed. I didn't know they were bricking, sorry. I would guess they use a similar strategy to delete Kingroot. So it would probably end the same way. If a recovery is in the works I'd wait.
Click to expand...
Click to collapse
Goodhur plenty have bricked using this on xda, it would be a good idea not to say use this if you haven't used yourself. Even some had said yes It works then later rebooted there device for the first time & posted back again saying I've bricked now.... How do I get out off it? No matter anyway Goodhur, no harm done
Sent from my SM-G900F using Tapatalk

Worked like a charm...

tobenary said:
Worked like a charm...
Click to expand...
Click to collapse
And that is?

problems solved with the 20-25 min crashing

tobenary said:
problems solved with the 20-25 min crashing
Click to expand...
Click to collapse
I was going absolutely nuts trying to figure out why my build was crashing on my sticks and not my FireTVs.
Going to remove root if I can and test to see if **** is still crashing on the sticks...
---------- Post added at 04:45 AM ---------- Previous post was at 04:29 AM ----------
Ok so using 4.8.1 if you didn't enable the protect root optimize feature this works.
If you did the optimize under 4.8.1 I'm not seeing a way to relaunch the app to remove it. It only says Force Stop, Clear Cache, and Clear Data under Kingroot for Applications.
Any ideas?

Ewle said:
I was going absolutely nuts trying to figure out why my build was crashing on my sticks and not my FireTVs.
Going to remove root if I can and test to see if **** is still crashing on the sticks...
---------- Post added at 04:45 AM ---------- Previous post was at 04:29 AM ----------
Ok so using 4.8.1 if you didn't enable the protect root optimize feature this works.
If you did the optimize under 4.8.1 I'm not seeing a way to relaunch the app to remove it. It only says Force Stop, Clear Cache, and Clear Data under Kingroot for Applications.
Any ideas?
Click to expand...
Click to collapse
On my firestick kingroot tried downloading the newest version.... I just deleted the apk
Sent from my SM-G900F using Tapatalk

su
ps
kill <PID # for com.kingroot.kinguser:service>
kill <PID # for /data/data-lib/com.kingroot.kinguser/ktools>
pm disable com.kingroot.kinguser
pm uninstall com.kingroot.kinguser
Pretty much kills it!

Ewle said:
su
ps
kill
kill
pm disable com.kingroot.kinguser
pm uninstall com.kingroot.kinguser
Pretty much kills it!
Click to expand...
Click to collapse
Do you still have root afterwards? Or does this just disable/kill kingroot? & don't get the crashes anymore?
Edit-
su
ps
kill
kill
pm disable com.kingroot.kinguser
If I used these would it still have su but kingroot would not update & also wouldn't crash?
Sent from my SM-G900F using Tapatalk

deanr1977 said:
Do you still have root afterwards? Or does this just disable/kill kingroot? & don't get the crashes anymore?
Edit-
su
ps
kill
kill
pm disable com.kingroot.kinguser
If I used these would it still have su but kingroot would not update & also wouldn't crash?
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Nope root is gone after the disable. The uninstall is just clean up. But remember you've already disabled amazon updates so you can always kingroot again if desired.

Viper 4 Q working no bootloop

So I've managed after hours of messing around to get viper to work. Endless bootloops to download mode.
I don't know if it was me not knowing how to install it or if it is just still a bit buggy on 10 but either way. I managed to get it installed working and some what simple.
None of this is official. And must be followed exact.......
This was done on my g9650 I don't know for US rooted snaps. Or Exynos. If those try at your own lesure
Always make a backup beforehand. If you do manage a bootloop restore your data and should be good.
First install audio modification library from magisk. Do not reboot yet...
Second we need to install the viper 4 Android apk from here
https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Do not install the driver. If you do you will be in a bootloop to download mode. So ye be warned.....
Back out of installing the driver. And go into settings mark for compatibility mode and attach audio effects to on.
Next download the rootlesss viper install here...
https://zackptg5.com/downloads/v4afx-rootless_03.17.2020.zip
Only place I found it. If some one knows a more legit place feel free to drop a link.
But now Install this from twrp and reboot. You should be good to go
I will stream line my thread once I'm not on mobile. With better pics and instructions.

TheMadScientist said:
Next download the rootlesss viper install here...
https://zackptg5.com/downloads/v4afx-rootless_01.15.2020.zip
Only place I found it. If some one knows a more legit place feel free to drop a link.
But now Install this from twrp and reboot. You should be good to go
I will stream line my thread once I'm not on mobile. With better pics and instructions.
Click to expand...
Click to collapse
I think it's legit enough since it refers to XDA and the author has other mods he worked on: https://zackptg5.com/android.php
Thanks for the tutorial.

tiliarou said:
I think it's legit enough since it refers to XDA and the author has other mods he worked on: https://zackptg5.com/android.php
Thanks for the tutorial.
Click to expand...
Click to collapse
Did it work ok for you?

TheMadScientist said:
Did it work ok for you?
Click to expand...
Click to collapse
I can confirm it works on G960F (exynos, elementalx kernel, alexdnr devbase rom Q)

TheMadScientist said:
Did it work ok for you?
Click to expand...
Click to collapse
I didn't try sorry.

G965F DBT4 devbase 7.2 does not work, after installing rootless drivers app still says drivers not found.
Wysłane z mojego SM-G965F przy użyciu Tapatalka

G9650 works!!
And can I install version 2.5?

kmvan said:
G9650 works!!
And can I install version 2.5?
Click to expand...
Click to collapse
No idea. I only tried with what's above

Ganjax said:
G965F DBT4 devbase 7.2 does not work, after installing rootless drivers app still says drivers not found.
Wysłane z mojego SM-G965F przy użyciu Tapatalka
Click to expand...
Click to collapse
Might have to play around with it. I did this on a 9650 so I don't know on F series

TheMadScientist said:
No idea. I only tried with what's above
Click to expand...
Click to collapse
OK, let me try it.
Report later.

kmvan said:
OK, let me try it.
Report later.
Click to expand...
Click to collapse
Just have a good backup right before and you can restore if not

V4a 2.4/2.5 apk works on rootlesss viper driver.
But sometimes crash.

kmvan said:
V4a 2.4/2.5 apk works on rootlesss viper driver.
But sometimes crash.
Click to expand...
Click to collapse
Awesome Well not but still Im kinda liking the newer version more stream lined Haven't had any issues now since I got it running

Hi
the same thing happened to me when installing viper,
excuse the question.
you can uninstall apps
through some application
without spoiling the system?
This situation is happening to me.
already teniedon root, magiks
if i delete any application
of system like, ecxel, crome.
when reboot never passes the s9 logo
automatically sends me to download mode.
good day

mezacorleehone said:
Hi
the same thing happened to me when installing viper,
excuse the question.
you can uninstall apps
through some application
without spoiling the system?
This situation is happening to me.
already teniedon root, magiks
if i delete any application
of system like, ecxel, crome.
when reboot never passes the s9 logo
automatically sends me to download mode.
good day
Click to expand...
Click to collapse
I know for sure you can't remove chrome. I deleted a lot of stuff. But chrome has to stay

TheMadScientist said:
I know for sure you can't remove chrome. I deleted a lot of stuff. But chrome has to stay
Click to expand...
Click to collapse
It is through twrp - mounting system - advanced. and file manager.
These are some that I delete, and I don't break down the system in this way.
root / system / priv-app / excel_samsungstub / remove
root / system / app / flipboardbrifing / remove
root / system / app / gmail2 / remove
The applications are still mounted on the system partition.
At the moment, removing apps from an apk causes damage to the system. forcing to load in odin.

mezacorleehone said:
It is through twrp - mounting system - advanced. and file manager.
These are some that I delete, and I don't break down the system in this way.
root / system / priv-app / excel_samsungstub / remove
root / system / app / flipboardbrifing / remove
root / system / app / gmail2 / remove
The applications are still mounted on the system partition.
At the moment, removing apps from an apk causes damage to the system. forcing to load in odin.
Click to expand...
Click to collapse
Don't know really mate. I'm still learning Android 10 and the s9 myself. Only had this one about a week

TheMadScientist said:
Don't know really mate. I'm still learning Android 10 and the s9 myself. Only had this one about a week
Click to expand...
Click to collapse
I confirm that in this way you can delete apps without spoiling the system.
is to see the location with likns2sd
Point the location.
* enters recovery mode
* mount partition system
*advanced
* file explorer
and search within the system folder for locations and delete
example
google drive
crome
Youtube
excel
etc

So when I install audio libray and back out of driver install this is what happens ......
I can't click the setting gear. It's shaded out and can only click on the driver one beside it.
How do I enable the setttings gear to open it?
Hopefully it's something easy.
On my galaxy s9 snapdragon

Works on note 10

[GUIDE] Unlock Factory Mode *root*

FIRST THING FIRST
EVEN IF YOUR PERSIST IS ALREADY BROKEN AND FINGERPRINT DOES NOT WORK.
BACK UP YOUR PERSIST.IMG BEFORE YOU PERFORM THIS GUIDE, IT IS SUPER EASY TO MESS UP YOUR CALIBRATIONS IN THIS MODE.
In a root explorer of your choice go to /mnt/vendor/persist/engineermode/
You'll see a file that is called 'engineermode_config' open that file with a text editor.
Code:
[SIZE="5"][B]encrypt_app=true[/B][/SIZE]
[SIZE="5"][B]encrypt_adb=true[/B][/SIZE]
rc4_key=*************************************************************************************************************************************************************************************************************************************************
imei=*******************
last_download_time=*******************
encrypt_log=true
Switch the two lines to "false"
Code:
[SIZE="5"][B]encrypt_app=false[/B][/SIZE]
[SIZE="5"][B]encrypt_adb=false[/B][/SIZE]
rc4_key=*************************************************************************************************************************************************************************************************************************************************
imei=*******************
last_download_time=*******************
encrypt_log=true
Reboot your device and enter the stock OnePlus phone app.
Enter your factory code of choice.
Main menu is *#808#

Sorry not sure to understand the purpose?

Steve0007 said:
Sorry not sure to understand the purpose?
Click to expand...
Click to collapse
You get all the factory settings for testing the phone including recalibration sensors, display, fp reader, etc.

good job crazy it lets that part of system be modified and revert back after boot

antnyhills said:
In a root explorer of your choice go to /mnt/vendor/persist/engineermode/
You'll see a file that is called 'engineermode_config' open that file with a text editor.
Switch the two lines to "false"
Reboot your device and enter the stock OnePlus phone app.
Enter your factory code of choice.
Main menu is *#808#
Click to expand...
Click to collapse
If this works great. My wife is at sleep now.i try this tomorrow

antnyhills said:
You get all the factory settings for testing the phone including recalibration sensors, display, fp reader, etc.
Click to expand...
Click to collapse
So being new to all this I got everything on my phone but don't see the f.p. sensor for I lost mine and am trying to get it working again.

pyry666 said:
If this works great. My wife is at sleep now.i try this tomorrow
Click to expand...
Click to collapse
Edit. Sure i can acces that mode but pf crashes if try that option..
Edit. And its just ocd thing anyway. Repair center is not that far away..
Edit3: so after playing some time now wuth factory mode U thank that you would still need that OnePlus specual tool to recalibrate fp reader..Am I wrong?

For FactoryMode unlock you can simple use my Magisk Module what I created on 7.5.2020
Works for every OnePlus device
https://download.android-freaks.de/dl/?dir=Miscellaneous/Magisk Modules (Android)

jamal2367 said:
For FactoryMode unlock you can simple use my Magisk Module what I created on 7.5.2020
Works for every OnePlus device
https://jamal2367.de/downloads/?dir=Miscellaneous/Magisk Modules (Android)
Click to expand...
Click to collapse
Link is down. 404 error.

Is it still working on 10.5.12 ?

TheKnux said:
Link is down. 404 error.
Click to expand...
Click to collapse
Try this, it's still the same module created by @jamal2367. I found the module in his website.

Module doesn't work. Dialing #*808# returns to the dialer.
Sent from my IN2025 using Tapatalk

FernBch said:
Module doesn't work. Dialing #*808# returns to the dialer.
Sent from my IN2025 using Tapatalk
Click to expand...
Click to collapse
Did you debloat your phone? Check that the EngineeringMode.apk file is present in the system /app/EngineeringMode folder. This apk is essential to make factory mode work.

dianoandr said:
Did you debloat your phone? Check that the EngineeringMode.apk file is present in the system /app/EngineeringMode folder. This apk is essential to make factory mode work.
Click to expand...
Click to collapse
The app is there. Editing the config file causes it to FC on open when dialing the code, couldn't seem to get past that so I tried the module.
Sent from my IN2025 using Tapatalk

FernBch said:
The app is there. Editing the config file causes it to FC on open when dialing the code, couldn't seem to get past that so I tried the module.
Sent from my IN2025 using Tapatalk
Click to expand...
Click to collapse
I have already read about a similar problem on oneplus 7 pro, on that occasion they solved it using an old version of the EngineerMode.apk, the one available on apk mirror here. The original thread I am referring to can be found here.

dianoandr said:
I have already read about a similar problem on oneplus 7 pro, on that occasion they solved it using an old version of the EngineerMode.apk, the one available on apk mirror here. The original thread I am referring to can be found here.
Click to expand...
Click to collapse
Thanks, I'll check it out. I've had the 1+8P for about 10 days so I'm still learning some of the secrets.
Sent from my IN2025 using Tapatalk

FernBch said:
Module doesn't work. Dialing #*808# returns to the dialer.
Click to expand...
Click to collapse
Should be *#808# rather than #*800#

FernBch said:
Thanks, I'll check it out. I've had the 1+8P for about 10 days so I'm still learning some of the secrets.
Sent from my IN2025 using Tapatalk
Click to expand...
Click to collapse
It's a pleasure, when you try let them know if it works, so it can get back to someone else

Steve0007 said:
Should be *#808# rather than #*800#
Click to expand...
Click to collapse
Oops. That's a typo.... Lol
Sent from my IN2025 using Tapatalk

*#808# is supposed to take you into "Factory Mode" aka manual test mode. I still haven't gotten past the FC issue.....
*#36446337# is for "Engineering Mode". From there you can also run factory mode but it still crashes....
Sent from my IN2025 using Tapatalk
---------- Post added at 08:02 PM ---------- Previous post was at 07:14 PM ----------
I should also add you can mess your phone up here. Proceed with extreme caution!!
Sent from my IN2025 using Tapatalk

Question Cannot manual update

Hi all, I do not seem to have the three dots in the upper right corner when going to Settings / About phone / MIUI Version. I wonder why is that?

Trying to tap several times on the MIUI 13 logo

I did and get the notification that additional features are on without any change.

If you have a theme, put the default one.
It may be because you have an update.

I do not have a specific theme installed. See attached screenshot.

It may be because you have an update

An update for what and how can I solve this? Thank you.

xdafriek said:
An update for what and how can I solve this? Thank you.
Click to expand...
Click to collapse
According to the 1st post you have to reboot to install the update.

When I reboot nothing is happening the phone just restarts and when I go back I see the same thing (?)

And what is the current rom version?

It's MIUI 13.0.8.0 Stable. I know that MIUI 14 Global is out now and that is way I am looking into this.

Try deleting all updater data and reboot.

NOSS8 said:
Try deleting all updater data and reboot.
Click to expand...
Click to collapse
How do I do that?

xdafriek said:
How do I do that?
Click to expand...
Click to collapse
If you have the update icon, long press on it / information / erase data.
Or settings / app management / installed apps / 3 dots at the top right / displayed all apps / search for update apps

Are you referring to this
NOSS8 said:
If you have the update icon, long press on it / information / erase data.
Or settings / app management / installed apps / 3 dots at the top right / displayed all apps / search for update apps
Click to expand...
Click to collapse
Are you referring to this? If so what is action clear cache or all data?

Yep,all data as said above and reboot.

Done and...

The next V14.0.1.0.TKWEUXM

That has worked. Many thanks for your help. Now was able to update to 14.0.1.0
NOSS8 said:
Try deleting all updater data and reboot.
Click to expand...
Click to collapse