Develop Bugs

[ROM] Pure LG Experience

Disclaimer:
Always make a backup first!! Flash at your own risk!
We are NOT responsible for anything that may happen to your phone.
We cannot be held responsible for smoke, fire, water, or other natural disasters.
Pure LG Experience​
What You Get
~ Based on Lollipop 13B firmware
~ Setenforce Permissive
~ Rooted Thanks goes to Chainfire SuperUser
~ Fully Debloated Verizon apps
~ Theme engine + Fonts supported
~ MyPlaces Supported
~ Google Cloud Drive activator supported
~ Smart Settings Supported
~ Backup & Restore Supported
~ User Mode Supported
~ Command Center Supported ( Widget )
~ Debugging changed to show more output in logcat ( Features the same dubug output as userdebug mode )
~ Insecure adbd on boot complete ( You still have to confirm your usb RSA though ) thanks to chainfire for the ideal
~ busybox added thanks to stericson binary
~ init.d supported
~ LG Smart world added
~ Few Overlay Changes
~ adb debugging enabled by default ( boot complete )
~ Patched qseecomd binary ( Memory / IO controller )
~ Deodex see notes on page 2
~ Disabled Modified system reporting
~ If system report modified, kdz stock then dd my image over
~ Disabled OTA's
~ Added LG stock browser
Download: FlashFire Install .zip
https://drive.google.com/file/d/0B3ocVtK9s0YrSm1SUGo1Tkx0N3c/view?usp=sharing
Click to expand...
Click to collapse
Guide to Using FlashFire:
http://forum.xda-developers.com/showpost.php?p=64425346&postcount=1
Click to expand...
Click to collapse

Notes:1
To enable HD calling, download myverizon app, activate hd calling then leave cache & /data/data but delete the app out of the data/app. feature stays enabled.
Click to expand...
Click to collapse
Notes:2
I issue the command after pushing files modded / permissions reset, give you an idea if it will work. if not you still have root via command prompt to fix your mistakes. Once fixed the system will boot fine. I find helpful, lot less of kdz restores I do.
setprop ctl.restart zygote
Click to expand...
Click to collapse
Notes:3 Using flashfire on my device
http://forum.xda-developers.com/showpost.php?p=64425346&postcount=1
Click to expand...
Click to collapse
Notes:4 Triggers LG Security
/# Non Booting deodex /system/app apks if modified
#
/system/app/LGATCMDService
/system/app/LGVZWStartupwizard
#
/# Non Booting deodex /system/priv-app apks if modified
#
Click to expand...
Click to collapse
Notes 5: Disabling Modified System
Rename or delete.
/system/bin/rctd
Click to expand...
Click to collapse
Download attached rct.cfg file and replace current file and repair permissions.
/persist/rct.cfg
Click to expand...
Click to collapse
Reporting will now show Official in all spectrum
Notes 6: Multi-user Mode - Add these lines to the /system/build.prop
fw.max_users=3
fw.show_multiuserui=1
Click to expand...
Click to collapse
Notes 7: Enable Multi-Window mode /system/build.prop
persist.splitwindow.support_all=true
Click to expand...
Click to collapse
Notes 8: Enable ABD and DeBugging on first boot /system/build.prop
sys.usb.state=auto_conf,adb
persist.service.adb.enable=1
persist.service.debuggable=1
Click to expand...
Click to collapse
Notes 8: Custom script apk_delete.sh - Location -> /system/vendor/bin/apk_delete.sh.
This file does not exist in our builds, but is enabled via boot.img init.rc's, You can place anything you want here. Does not run on first boot and each modification to the file will require 2 reboots, after which you shutdown / startup like normal scripts.
To Enable apk_delete.sh add this line to /system/build.prop then add your custom script to Location -> /system/vendor/bin/apk_delete.sh
persist.data.sbp.update=1
Click to expand...
Click to collapse

Thank You Eugene for this initiative
Sent from my VS986 using Tapatalk

Rooted?
Enviado desde mi VS986 mediante Tapatalk

CyberManiaK said:
Rooted?
Enviado desde mi VS986 mediante Tapatalk
Click to expand...
Click to collapse
Yes it's rooted.
*EDIT*
12/21/15
I should have the flashfire img put together today with instruction on how to flash it.

OP Updated for flashfire & guide

Has anyone tried this?
Sent from my VS986 using Tapatalk

I have. So far its great! I installed flash fire style. Everything went fine. Only thing now is in trying to get advanced calling to work again. I already had it enabled. I did what OP suggested but nothing is working. Other than that its nice to have smart settings!

hschreibz7 said:
I have. So far its great! I installed flash fire style. Everything went fine. Only thing now is in trying to get advanced calling to work again. I already had it enabled. I did what OP suggested but nothing is working. Other than that its nice to have smart settings!
Click to expand...
Click to collapse
Did you download myverizon app and then activate hd calling before deleting out of /data/app?
I'll look into this issue in the morning.

All is working fine except hd calling want activate. Downloaded my verizon app and then went to settings avanced calling to activate but get the process.com.Android.settings has stopped. I've done everything from wipe settings and apps to flashing again and nothing helps. Any suggestions?
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
eugene373 said:
Did you download myverizon app and then activate hd calling before deleting out of /data/app?
I'll look into this issue in the morning.
Click to expand...
Click to collapse
Just saw your post. Same problem here with hd calling

I'll have a look at the settings.apk does anyone have the stock LGSettings.apk with odex files. I'd have to flash back to stock at this point.
rsb321 said:
All is working fine except hd calling want activate. Downloaded my verizon app and then went to settings avanced calling to activate but get the process.com.Android.settings has stopped. I've done everything from wipe settings and apps to flashing again and nothing helps. Any suggestions?
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
Just saw your post. Same problem here with hd calling
Click to expand...
Click to collapse

eugene373 said:
I'll have a look at the settings.apk does anyone have the stock LGSettings.apk with odex files. I'd have to flash back to stock at this point.
Click to expand...
Click to collapse
I don't but I've got the stock kdz ready to flash. I'll pull it and send to you then once we get it figured out I'll reflash your Rom .
One thing I've noticed is my hd calling says click here to turn it off although I've verified through 4g Data not working on calls and the hd notification not showing up on calls to my wife that it definatley is not working. I also know that it for sure worked on stock so it's something that's causing settings to stop. Soon as I get flashed to stock I'll upload settings.apk

See the errors now, I'll have it fix soon.

eugene373 said:
See the errors now, I'll have it fix soon.
Click to expand...
Click to collapse
Ok after 2 hours of messing with adb saying my device is offline I give up...adb worked fine but this is the first time using it with Windows 10 so I'm guessing it's got drivers messed up which is causing it to not issue a device authorization attempt which means I can't use adb right now.....
I'll patiently wait for your fix. Thank you for the help

Sometimes I have the same issue with Windows, not sure of the exact problem. But restarting Windows and phone while usb is disconnected ussally fixes the issue for no apparent reason.
rsb321 said:
Ok after 2 hours of messing with adb saying my device is offline I give up...adb worked fine but this is the first time using it with Windows 10 so I'm guessing it's got drivers messed up which is causing it to not issue a device authorization attempt which means I can't use adb right now.....
I'll patiently wait for your fix. Thank you for the help
Click to expand...
Click to collapse

I want to know after flashing this img my non Verizon CDMA carrier's 3G settings are gone, and I can't connect anymore through 3G.
It needs 3G settings reprogramming , what could caused this issue ?
Knowing that I flashed 13b KDZ on top of 10B and then flashed another 13B rooted img and nothing like that happened...
Sent from my VS986 using Tapatalk

Have the hd calling fixed, DADER can you send me a screen shot?
*Edit*
I did a factory wipe and have some of the issues at hand now, working on them to day / now... Fixing the issues.
Edit-2 adb error
I've fixed Root adbd insecure. it now waits to see if you have rsa key before running.
Edit-3
Think I found the fix for VVm not working. fixed now
edit-4
I'll try and have it uploaded by X-mas morning

eugene373 said:
Have the hd calling fixed, DADER can you send me a screen shot?
*Edit*
I did a factory wipe and have some of the issues at hand now, working on them to day / now... Fixing the issues.
Click to expand...
Click to collapse
Any chance of working VVM? Just wondering because even installing it won't connect to the service.

eugene373 said:
Have the hd calling fixed, DADER can you send me a screen shot?
Click to expand...
Click to collapse
Unfortunately I am not a Verizon user, I do use my phone on a Yemeni CDMA carrier called "Yemen Mobile" which it doesn't has any features like HD calling, only 3G network (EV-DO) [emoji3] .
Please tell me what to take a screenshot for and I will be happy to take it.
Thanks
Sent from my VS986 using Tapatalk

Working great so far. Everything works as of now , including HD calling (Note#1 in thread post#2 worked for me). Great job and thanks again!

Issues since January patches

1) image search in Google won't let you go to original image or go to webpage. Same search in chrome works fine
2) Clicking on links in Slickdeals causes the app to crash.
Is anyone experiencing this? Is there any issues you guys would like to confirm as well?
Sent from my Pixel XL using Tapatalk

biggiestuff said:
1) image search in Google won't let you go to original image or go to webpage. Same search in chrome works fine
2) Clicking on links in Slickdeals causes the app to crash.
Is anyone experiencing this? Is there any issues you guys would like to confirm as well?
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
I tried the image search and I can open the original image and go to the website without issue. I installed the Slick Deals app and clicking on links also works fine.

airmaxx23 said:
I tried the image search and I can open the original image and go to the website without issue. I installed the Slick Deals app and clicking on links also works fine.
Click to expand...
Click to collapse
Thanks. Something must have gotten jacked up for me. The first issue having a Verizon bootloader locked phone has just come to fruition. I can't just flash the system to bring things back without wiping.
Sent from my Pixel XL using Tapatalk

biggiestuff said:
Thanks. Something must have gotten jacked up for me. The first issue having a Verizon bootloader locked phone has just come to fruition. I can't just flash the system to bring things back without wiping.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
I'm also on VZW but with an unlocked bootloader. You can flash the system with fastboot or flash the whole thing with the -w removed from the .bat file and it won't wipe anything.

airmaxx23 said:
I'm also on VZW but with an unlocked bootloader. You can flash the system with fastboot or flash the whole thing with the -w removed from the .bat file and it won't wipe anything.
Click to expand...
Click to collapse
Unfortunately I'm locked. I thought this time around I wouldn't need an unlocked bootloader.
Sent from my Pixel XL using Tapatalk

I left the google beta and went back to stable google and my issues with the "visit webpage" and "view original image" are gone. I'm still working on that slickdeals app link issue.
EDIT: I take that back. the factory version of Google works just fine but when I update (non-beta) it still happens.

My Google app is entirely broken. As soon as it tries to give any result, it freezes, FCs and crashes.
Sent from my Pixel XL using XDA-Developers mobile app

BCSC said:
My Google app is entirely broken. As soon as it tries to give any result, it freezes, FCs and crashes.
Sent from my Pixel XL using XDA-Developers mobile app
Click to expand...
Click to collapse
Was this before or after January patches?

Okay, I give up. works perfectly in Safe mode. I've tried uninstalling nearly every app on my phone to see which one is causing it. I might as well factory reset.

I hate the YouTube app getting frozen video but audio Continues that has been on my pixel XL since the beginning

Chrome is really stuttering here and there after this update. Or maybe it behaved like that all along can't say. But Chrome isn't smooth at all!

I finally uninstalled enough apps. I think it's related to possibly one of the Daydream apps. I'm going to slowly start reinstalling them but I'm back to normal on everything now
Sent from my Pixel XL using Tapatalk

biggiestuff said:
Was this before or after January patches?
Click to expand...
Click to collapse
Im almost certain its from after the patch. I use the app multiple times a day and didnt have this issue before the 3rd.
Sent from my Pixel XL using XDA-Developers Legacy app

BCSC said:
Im almost certain its from after the patch. I use the app multiple times a day and didnt have this issue before the 3rd.
Sent from my Pixel XL using XDA-Developers Legacy app
Click to expand...
Click to collapse
Mine was doing that as well while I was troubleshooting. In safe mode it and fine. Try that. If it works in safe mode then start uninstalling apps like I did. Still scared to install daydream apps as I think that was the cause of my issue.
Sent from my Pixel XL using Tapatalk

After the update, I randomly get rather loud static noise (just like when a TV is seeking a channel) coming from my headphones even if nothing is playing. Once it starts, it can't be stopped until I reboot the phone.

biggiestuff said:
Thanks. Something must have gotten jacked up for me. The first issue having a Verizon bootloader locked phone has just come to fruition. I can't just flash the system to bring things back without wiping.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
While you can't use the fastboot images you can use the full OTA images.
Download current file from:
https://developers.google.com/android/ota
Boot device into recovery
Select sideload from adb
adb sideload <updatefile>
This basically the same as the full factory image but does not require an unlocked bootloader and does NOT wipe your device.

arcanexvi said:
While you can't use the fastboot images you can use the full OTA images.
Download current file from:
https://developers.google.com/android/ota
Boot device into recovery
Select sideload from adb
adb sideload <updatefile>
This basically the same as the full factory image but does not require an unlocked bootloader and does NOT wipe your device.
Click to expand...
Click to collapse
That's a good thought. If the OTA is small would it contain the system.img to restore it from scratch?
Sent from my Pixel XL using Tapatalk

biggiestuff said:
That's a good thought. If the OTA is small would it contain the system.img to restore it from scratch?
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
These are not traditional 50 meg OTA files. They're in the 500 meg to 1 gig range. They're full images. Period. This is the reason they were created. To flash a complete image to a locked device.
Sent from my Pixel XL using Tapatalk

[MAGISK] OnePlus 5 Google Dialer + Contacts - Fully working!

All the methods of installing the Google Dialer on the OP5 kinda worked but would not allow the user to answer/decline calls from the notification popup. Well, did some digging on this and found a solution. This is a Magisk Module, so for those that use Magisk, simple flash and restart. Be sure you select the new Phone app as default for calls. Also, need to go in and manually set the permissions for the app.
This can be done by going to "app info" for default OnePlus phone app and disabling, then by going to Google Phone "app info" and clicking on Phone App, then on the "Configure apps screen, changing the default Phone App to the only option you should have (after disabling the default one) which is the Google "Phone". Then make sure your new Phone app has all it's permissions.
Enjoy!
Update: TWRP install method added for those not using Magisk. Just flash the zip and good to go.
Magisk Module v2.1a: Update Sep 5, 2017
https://www.androidfilehost.com/?fid=817550096634797320
TWRP Install:
https://www.androidfilehost.com/?fid=889764386195918352

Thanks intall working

Thanks can you make a non magisk flash able zip? I'm decrypted and magisk only works on encrypted setup as far I know.
Sent from my OnePlus5 using XDA Labs

Great Tweak mate! Thank you so much

I'm expecting an important call today, but will test thoroughly later.

ilia1985 said:
Thanks can you make a non magisk flash able zip? I'm decrypted and magisk only works on encrypted setup as far I know.
Sent from my OnePlus5 using XDA Labs
Click to expand...
Click to collapse
This *may* work. I am new to installer scripts, so hopefully I wrote this correctly... Please let me know.

badcrow35 said:
Thanks intall working
Click to expand...
Click to collapse
I don't own a OnePlus 5, I have a 3 but I saw a Turkish text and decided to write. How did you get access to OnePlus 5? Have you imported it from abroad or are you living in abroad?

Brought with my friend from abroad UK

ilia1985 said:
Thanks can you make a non magisk flash able zip? I'm decrypted and magisk only works on encrypted setup as far I know.
Click to expand...
Click to collapse
dustintinsley said:
This *may* work. I am new to installer scripts, so hopefully I wrote this correctly... Please let me know.
Click to expand...
Click to collapse
Can anyone confirm if the zip works?

dustintinsley said:
All the methods of installing the Google Dialer on the OP5 kinda worked but would not allow the user to answer/decline calls from the notification popup. Well, did some digging on this and found a solution. This is a Magisk Module, so for those that use Magisk, simple flash and restart. Be sure you select the new Phone app as default for calls. Also, need to go in and manually set the permissions for the app.
This can be done by going to "app info" for default OnePlus phone app and disabling, then by going to Google Phone "app info" and clicking on Phone App, then on the "Configure apps screen, changing the default Phone App to the only option you should have (after disabling the default one) which is the Google "Phone". Then make sure your new Phone app has all it's permissions.
Enjoy!
https://www.androidfilehost.com/?fid=889764386195917884
Click to expand...
Click to collapse
Work like a charm wish everything went this easy

Awesome, works just fine. This has been driving me bonkers lol.

Working great! I use xxx rom with latest Magisk. Thx! :highfive:

dreams.sri said:
Can anyone confirm if the zip works?
Click to expand...
Click to collapse
I have not tested it as I use Magisk, but it should work. Worse case is that it will still not answer from notification. Should not cause any boot loop or anything like that. Have you tried the zip? There should be no issues with it, if you have issues please let me know so I can fix it...

Binary Assault said:
Awesome, works just fine. This has been driving me bonkers lol.
Click to expand...
Click to collapse
Same here man. It was driving me nuts. I'm kinda OCD so I had to figure it out. Glad others find it useful...

But OnePlus Dialer Is Better Than Google One ?

Krsambhav16 said:
But OnePlus Dialer Is Better Than Google One ?
Click to expand...
Click to collapse
Not sure that I agree, but to each his own...

Can someone explain how to flash the magisk module? Flash it via TWRP or via Magisk?

Donald Nice said:
Can someone explain how to flash the magisk module? Flash it via TWRP or via Magisk?
Click to expand...
Click to collapse
You can do it either way. I prefer doing it via Magisk, but either should work.

does it vibrate when the call connects?

dustintinsley said:
This *may* work. I am new to installer scripts, so hopefully I wrote this correctly... Please let me know.
Click to expand...
Click to collapse
Thanks for taking time to make it. Just tried and TWRP throws error 6.

AOD for Pixel XL on P DP1

Back on Oreo, all we had to do was bring the Framework-res__auto_generated.apm from the Pixel 2 (or Pixel 2 XL) and install it in System/vendor/overlay. Since we don't have root (yet) for P, is there any other way to do it? I tried via TWRP (ADB in TWRP and making a flashable zip) but I'm honestly not extremely experienced with this. Via TWRP I can't get system/vendor/overlay to show, and putting the APK in Vendor/overlay doesn't seem to activate it. Any ideas, or just wait for root?

YTSec said:
Back on Oreo, all we had to do was bring the Framework-res__auto_generated.apm from the Pixel 2 (or Pixel 2 XL) and install it in System/vendor/overlay. Since we don't have root (yet) for P, is there any other way to do it? I tried via TWRP (ADB in TWRP and making a flashable zip) but I'm honestly not extremely experienced with this. Via TWRP I can't get system/vendor/overlay to show, and putting the APK in Vendor/overlay doesn't seem to activate it. Any ideas, or just wait for root?
Click to expand...
Click to collapse
Looks like root is working sorta with magisk, just an issue with magisk manager. You might be able to get unrestricted root access to a file explorer app and compete your task. Let me know how it goes because id like to get AOD working too :good:
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589/page543

Jackaroop said:
Looks like root is working sorta with magisk, just an issue with magisk manager. You might be able to get unrestricted root access to a file explorer app and compete your task. Let me know how it goes because id like to get AOD working too :good:
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589/page543
Click to expand...
Click to collapse
Trying that now, I'll update if it works out.

YTSec said:
Trying that now, I'll update if it works out.
Click to expand...
Click to collapse
Confirmed working!

YTSec said:
Confirmed working!
Click to expand...
Click to collapse
Steps please and thanks.

Do you have the framework APK?
---------- Post added at 11:59 PM ---------- Previous post was at 11:57 PM ----------
muppetmaster916 said:
Steps please and thanks.
Click to expand...
Click to collapse
Read that area of the thread
https://forum.xda-developers.com/pi...firehound-v4-1-pixel-xl-t3744866/post75492280

To get this working, flash Magisk 16 via TWRP, boot up and use a file manager (I used ES file manager) to move the APK here to system/vendor/overlay overwrite the original. The phone will either reboot, or systemui will crash, when you get back in, go into the file manager again and set the correct permissions.
Make sure you remove your passwords, just incase something goes wrong while installing it.

YTSec said:
To get this working, flash Magisk 16 via TWRP, boot up and use a file manager (I used ES file manager) to move the APK here to system/vendor/overlay overwrite the original. The phone will either reboot, or systemui will crash, when you get back in, go into the file manager again and set the correct permissions.
Make sure you remove your passwords, just incase something goes wrong while installing it.
Click to expand...
Click to collapse
How do we install the burn in protection? Sorry for bugging you I've been googling for hours and you're the only person who seems to know how to do this or that this is possible.

SubjectGinger said:
How do we install the burn in protection? Sorry for bugging you I've been googling for hours and you're the only person who seems to know how to do this or that this is possible.
Click to expand...
Click to collapse
I took a screen recording for 20 mins and skipped around in the recording, the charge level, notifications, and clock all move around slowly. So it seems to be enabled by default.

YTSec said:
I took a screen recording for 20 mins and skipped around in the recording, the charge level, notifications, and clock all move around slowly. So it seems to be enabled by default.
Click to expand...
Click to collapse
Awesome, thanks! I tried installing it but now all the apps are crashing and I can't get back into my file manager to set the correct permissions, it crashes too. Is there a way to get the file manager to work? I'm using Solid Explorer on 8.1

SubjectGinger said:
Awesome, thanks! I tried installing it but now all the apps are crashing and I can't get back into my file manager to set the correct permissions, it crashes too. Is there a way to get the file manager to work? I'm using Solid Explorer on 8.1
Click to expand...
Click to collapse
If you are on 8.1, you need to use the APK extracted from a 8.1 system IMG for the Pixel 2 or Pixel XL 2. As for the file manager, try Amaze, I used it when ES was crashing non-stop.

YTSec said:
If you are on 8.1, you need to use the APK extracted from a 8.1 system IMG for the Pixel 2 or Pixel XL 2. As for the file manager, try Amaze, I used it when ES was crashing non-stop.
Click to expand...
Click to collapse
Yeah I was, I used the 8.1 Feb 2018 file you provided here. I'll give that a try next, installing the March security update to try and fix the crashing

SubjectGinger said:
Yeah I was, I used the 8.1 Feb 2018 file you provided here. I'll give that a try next, installing the March security update to try and fix the crashing
Click to expand...
Click to collapse
I provided the one for Android P DP1 here, not 8.1. I put the February one in the foreground ROM thread I think though.

YTSec said:
I provided the one for Android P DP1 here, not 8.1. I put the February one in the foreground ROM thread I think though.
Click to expand...
Click to collapse
Yeah the one from the foreground thread is the one I used. This might be a dumb question but how did you open the system image from the pixel 2 factory image to get the framework file? I can't open the .img as an archive and it fails to mount on both windows and Mac saying it's a corrupted image (downloaded straight from Google's site)

SubjectGinger said:
Yeah the one from the foreground thread is the one I used. This might be a dumb question but how did you open the system image from the pixel 2 factory image to get the framework file? I can't open the .img as an archive and it fails to mount on both windows and Mac saying it's a corrupted image (downloaded straight from Google's site)
Click to expand...
Click to collapse
Honestly it's a pain, I installed Ubuntu via virtual box, and went through a extraction process. https://forum.xda-developers.com/nexus-5x/general/guide-how-to-extract-nexus-factory-image-t3562665

YTSec said:
Honestly it's a pain, I installed Ubuntu via virtual box, and went through a extraction process. https://forum.xda-developers.com/nexus-5x/general/guide-how-to-extract-nexus-factory-image-t3562665
Click to expand...
Click to collapse
I went through that link, installed the extractor for Windows and tested it with the March 8.1 for Sailfish. Worked flawlessly. Download the March 8.1 for Walleye, "imgextractor has stopped working" and only extracts about 1/4 of the system img. You weren't kidding it really is a pain

SubjectGinger said:
I went through that link, installed the extractor for Windows and tested it with the March 8.1 for Sailfish. Worked flawlessly. Download the March 8.1 for Walleye, "imgextractor has stopped working" and only extracts about 1/4 of the system img. You weren't kidding it really is a pain
Click to expand...
Click to collapse
It doesn't work on windows, needs to be Linux. Try installing it in a virtual machine, only way I was able to get it working.

Here's the 8.1 March 2018 apk from Pixel 2 XL

reddv1 said:
Here's the 8.1 March 2018 apk from Pixel 2 XL
Click to expand...
Click to collapse
I really appreciate the help, but I have a Pixel 1 (non-xl)
Any chance I could get you to post the March 2018 from the Pixel 2 non-xl?
I've been trying to get this system image extractor to work and even on Linux am running into issues.
Anyways, if not no worries but I'd be very thankful if you could find the time!

SubjectGinger said:
I really appreciate the help, but I have a Pixel 1 (non-xl)
Any chance I could get you to post the March 2018 from the Pixel 2 non-xl?
I've been trying to get this system image extractor to work and even on Linux am running into issues.
Anyways, if not no worries but I'd be very thankful if you could find the time!
Click to expand...
Click to collapse
I don't think it's much different honestly, it SHOULD still work the same. The original XL and 2 XL are significantly different and it works fine, I have also used the APK from the normal Pixel 2 on my XL with no issues.

Enable quick wallet access Google Pay for Pixels running Android 10

Has anyone got this working? I've done everything and the new power menu appears and the Cards and Passes does show up in gestures for about 30 seconds and then disappears. When press the power button it only shows the new power menu and not the cards.
https://www.xda-developers.com/enable-quick-wallet-access-google-pay-pixel-android-10/#disqus_thread

Same issue here. I don't even get the option for cards and passes in gestures menu....

i had to reboot like three times and then the cards magically appeared. It's not something that works instantly.

qman66 said:
i had to reboot like three times and then the cards magically appeared. It's not something that works instantly.
Click to expand...
Click to collapse
Thanks. There is something else connected. I did this mod yesterday and have rebooted multiple times. Are you on a custom kernel?

elreydenj said:
Thanks. There is something else connected. I did this mod yesterday and have rebooted multiple times. Are you on a custom kernel?
Click to expand...
Click to collapse
no

Got it working, but my option to enable it appeared in a different place.
Maybe do a reboot, put your code in if you have one, and then just let the phone sit for awhile.
Sent from my Pixel 4 XL using Tapatalk

Curiousn00b said:
Got it working, but my option to enable it appeared in a different place.
Maybe do a reboot, put your code in if you have one, and then just let the phone sit for awhile.
Click to expand...
Click to collapse
What do you mean by a different place?

elreydenj said:
Thanks. There is something else connected. I did this mod yesterday and have rebooted multiple times. Are you on a custom kernel?
Click to expand...
Click to collapse
I'm on a custom Kernal. Booted many times and the gesture appears but still disappears in a matter of seconds. Very frustrating.

warrencoakley said:
I'm on a custom Kernal. Booted many times and the gesture appears but still disappears in a matter of seconds. Very frustrating.
Click to expand...
Click to collapse
So am I. I wonder if there is a correlation between the custom kernel and the gesture not appearing.

warrencoakley said:
What do you mean by a different place?
Click to expand...
Click to collapse
Yours appeared above Flip to Shh and mines appeared at the bottom of the list.
Sent from my Pixel 4 XL using Tapatalk

elreydenj said:
So am I. I wonder if there is a correlation between the custom kernel and the gesture not appearing.
Click to expand...
Click to collapse
Well the dev didn't specify in his installation instructions that you needed to be on a stock kernal. The only requirement was to be in Android 10. I've tried a few reboots and nothing.

Curiousn00b said:
Yours appeared above Flip to Shh and mines appeared at the bottom of the list.
Click to expand...
Click to collapse
Ah ok. Very strange. Not sure what are or not the full requirements are for installation. It's a bit vague from the dev and no real support on it.

warrencoakley said:
Well the dev didn't specify in his installation instructions that you needed to be on a stick kernal. The only requirement was to be in Android 10. I've tried a few reboots and nothing.
Click to expand...
Click to collapse
You do have the SQLite module installed, yes? GPay fix as well?
1. Install SQLite Module
2. Install GPay Fix
3. Reboot
4. Install GooglePayPowerMenu Module
5. Reboot and wait it out some
Sent from my Pixel 4 XL using Tapatalk

Curiousn00b said:
You do have the SQLite module installed, yes? GPay fix as well?
1. Install SQLite Module
2. Install GPay Fix
3. Reboot
4. Install GooglePayPowerMenu Module
5. Reboot and wait it out some
Click to expand...
Click to collapse
This is what I have installed. My GPay has been working for a long time with these modules installed.
Do I need to do anything else?
The gesture just disappears after a reboot.

Working here :good:

Working fine here. I had to reboot 2 times, disable and re-enable the toggle in order to make it work. Now it runs perfectly fine

warrencoakley said:
This is what I have installed. My GPay has been working for a long time with these modules installed.
Do I need to do anything else?
The gesture just disappears after a reboot.
Click to expand...
Click to collapse
Those are the correct modules and it should be up and running.
After reading things, they sound like scripts so that's why I suggest letting it sit for a little after you boot up. Try reinstalling the modules and try to get the option to come up for you once more.
Sent from my Pixel 4 XL using Tapatalk

Curiousn00b said:
Those are the correct modules and it should be up and running.
After reading things, they sound like scripts so that's why I suggest letting it sit for a little after you boot up. Try reinstalling the modules and try to get the option to come up for you once more.
Click to expand...
Click to collapse
Ok I'll try and reinstall all those modules. Yes as they are scripts it may take a few minutes to run but they don't. Not sure if the permissions should be changed or correct. The creater has another module like this for the live caption which I installed and again are scripts and run perfectly so not sure what's going on. After multiple reboots it appears in gestures and just disappears and nothing happens. See attached.

TENN3R said:
Working fine here. I had to reboot 2 times, disable and re-enable the toggle in order to make it work. Now it runs perfectly fine
Click to expand...
Click to collapse
Did you have issues with the gesture toggle disappearing?

Curiousn00b said:
Those are the correct modules and it should be up and running.
After reading things, they sound like scripts so that's why I suggest letting it sit for a little after you boot up. Try reinstalling the modules and try to get the option to come up for you once more.
Click to expand...
Click to collapse
Tried reinstalling all the modules again and toggling the switch on and off and while doing it in gestures again it just disappeared. No idea what's going on. Not sure if one of my modules is conflicting with this module or not? Just strange it's kind of the same script as live caption but just does not want to play ball