Tcl 50p8m can`t load android system - Philips, Sony, TCL Android TV

Hi guys
please need help TCL android TV model 50P8M not working
also, remote control, not respons and TV only power botton
please need help
check photo

still need help bro?
---------- Post added at 05:01 AM ---------- Previous post was at 04:59 AM ----------
halswar said:
Hi guys
please need help TCL android TV model 50P8M not working
also, remote control, not respons and TV only power botton
please need help
check photo
Click to expand...
Click to collapse
just plug an usb keyboard and choose ignore to try
to start the system... if it doesn't work choose factory data reset then restart

did this work for you @@halswar ?
@esolks l have the same issue, I tried to connect a usb keyboard but nothing happens when typing.
Plz any ideas?

Thanks for reply
Already i try by mouse and keyboard usb but not working

did you try to reflash? (hold power button ON TV for around 10 seconds with a usb stick+update in it)

Yes i used your solution
https://forum.xda-developers.com/an...v/tcl-android-tv-model-55p8m-android-t4025755
Not working
But divrent model

try first with the original remote control. point it to the TV cause it has infra red sensort
try to select and choose option
i'll contact support if needed... cause i have the some TV and i don't like it if this happen to me
regards

esolks said:
try first with the original remote control. point it to the TV cause it has infra red sensort
try to select and choose option
i'll contact support if needed... cause i have the some TV and i don't like it if this happen to me
regards
Click to expand...
Click to collapse
The only remote control that is provided with the tv (small) doesn't work at all in this situation dear bro, be careful not to make any updates or something that could cause the Android recovery screen to pop up,
btw is there some TCL support (phone number or email) because their Moroccan website has nothing https://www.tcl.com/mo/fr/services.html ?

Mo-80 said:
The only remote control that is provided with the tv (small) doesn't work at all in this situation dear bro, be careful not to make any updates or something that could cause the Android recovery screen to pop up,
btw is there some TCL support (phone number or email) because their Moroccan website has nothing https://www.tcl.com/mo/fr/services.html ?
Click to expand...
Click to collapse
hi bro
there is a botom behind the led, to select click 1 time, to choose click and maintain the click, select factory reset
if it work for you let me know and send me your skype by PM

esolks said:
hi bro
there is a botom behind the led, to select click 1 time, to choose click and maintain the click, select factory reset
if it work for you let me know and send me your skype by PM
Click to expand...
Click to collapse
Really appreciated your cooperate
I will send private msg

esolks said:
hi bro
there is a botom behind the led, to select click 1 time, to choose click and maintain the click, select factory reset
if it work for you let me know and send me your skype by PM
Click to expand...
Click to collapse
Sure bro, Thank you for you reply, I have already tested that (it's actually one of the first stuff I tested), It doesn't work on the black screen(recovery mode) unlike when Android is working fine where it controls both volume and power on/off.

Up

What update.img
still same issue

Related

Help! Can't connect the device to PC

Hi guys! After upgrading my ROM to "838Pro_HK_ENG_WM6_Upgrade_20070712" I can't connect my device to pc anymore... My PC found it as a "Generic RNDIS" but now it finds it as "Generic Serial"...
My active sync and RUUWrapper cannot find the device... I want to change my ROM. Need help!
oxydiom said:
Hi guys! After upgrading my ROM to "838Pro_HK_ENG_WM6_Upgrade_20070712" I can't connect my device to pc anymore... My PC found it as a "Generic RNDIS" but now it finds it as "Generic Serial"...
My active sync and RUUWrapper cannot find the device... I want to change my ROM. Need help!
Click to expand...
Click to collapse
Why didn't you try to force the device to bootloader and try again? DON"T PANIC!!!
Then Use the RUU tool attached! and put your favorite xxx.nbh in the folder
Enjoy~~
Try Start/settings/connections/usb to pc and click or unclick the check mark.
dioxda2 said:
Why didn't you try to force the device to bootloader and try again? DON"T PANIC!!!
Click to expand...
Click to collapse
How can I do it?
norwstman30 said:
Try Start/settings/connections/usb to pc and click or unclick the check mark.
Click to expand...
Click to collapse
I have tried it before, if it is marked : Genereic RNDIS
if not: Generic Serial!
oxydiom said:
How can I do it?
I have tried it before, if it is marked : Genereic RNDIS
if not: Generic Serial!
Click to expand...
Click to collapse
boot loader =
side "ok" button + power button, keep pressing (like squeezing), then pick the bottom reset hole for half second then ONLY release the reset, keep pressing the 2 buttons until you see the 3 colors.
OK, please see / read my previous post (scroll up ) tools updated
dioxda2 said:
boot loader =
side "ok" button + power button, keep pressing (like squeezing), then pick the bottom reset hole for half second then ONLY release the reset, keep pressing the 2 buttons until you see the 3 colors.
OK, please see / read my previous post (scroll up ) tools updated
Click to expand...
Click to collapse
You know! Another problem!
I forced the device to the bootloader but it can't connect to PC. My PC founds a new hardware: USB Drive and cannot install it...
What should I do now??!
Have u installed some someware likes cisco VPN
cowboy086 said:
Have u installed some someware likes cisco VPN
Click to expand...
Click to collapse
nope!
I searched the net and found a driver, the problem has been solved
cowboy086 said:
Have u installed some someware likes cisco VPN
Click to expand...
Click to collapse
nope!
I searched the net and found a driver, the problem has been solved
Could you tell me what driver you found that fixed the issue?
branden7 said:
Could you tell me what driver you found that fixed the issue?
Click to expand...
Click to collapse
The file "VistaRUU" in the link below:
HTML:
http://www.modaco.com/content/Windows-Mobile-News/252977/RUU-on-Vista-It-can-be-done-the-ultimate-guide/
my device does not connect also. it says the computer does not recognize this usb device?help
naveen said:
my device does not connect also. it says the computer does not recognize this usb device?help
Click to expand...
Click to collapse
1. restart computer, or
2. reset your Hermes, or
3. uninstall Active-sync, then install again (may need to restart PC again),
OK? ^_^
P.S. be sure that you had tick the usb connection option from the activeSync option. ^_^
dioxda2 said:
1. restart computer, or
2. reset your Hermes, or
3. uninstall Active-sync, then install again (may need to restart PC again),
OK? ^_^
P.S. be sure that you had tick the usb connection option from the activeSync option. ^_^
Click to expand...
Click to collapse
i will try that right now. thank you for the tip
i tired, it did not work. quick question, i called htc for help and they belive the device has failed. i think i have installed some program that is confusing the active sync because it is not completely installed. the program is called netcf something. any feedback would be great!

Alpine Blackbird 2 - Unlocking The Undone

Hello!
I've been out of the phone game for a while (plan on coming back soon though), but I've been tinkering around with random things.
A few months back I picked up a new car that had a double din alpine head unit, and behind the head unit this PMD - 200 Blackbird 2 was being stowed.
Interested in what it was, I quickly learned it was a Windows CE 4.2 based device that alpine had applied a skin to.
As I started messing with it, I realized that whenever I turned it on, it would just go to a black screen. After looking around online and talking to some Representative at Alpine, there was no longer any support for it and they pretty much told me to go screw myself with my obsolete device.
That's fine, I said...I'll figure out a way to get it working. Obviously the device is home to a Win CE infrastructure and I'd be happy with having that alone...and from there I could do many things.
So I started messing with it. Pushing different button combinations seeing if it would boot into a boot-loader or anything. To my avail, about 15 minutes in I had it booting into Windows CE. I Simply held the reset button and the power button for 15 seconds, let off the rest button, it powered on, started playing with the center button...and poof...Windows CE appeared.
So I start messing around. Checking out the pre-installed data and such. Im about to wife all of Alpine's crappy software and have it boot strictly into windows, and by accident I clicked an icon that booted me back into Alpine's overlay.
No matter! I'll just boot back into windows! So I hold the reset button and turn off the device. Then I go through the process of booting windows again....and nothing...it boots straight into "Map Update Mode". I keep trying the same thing, but the more I try, the more frustrated I get that it won't do what I had it doing before.
That's okay. Map update mode is essentially saying the device is looking for update. Oh..I'll give it an "update" alright I said...But it's plainly recognized as a mass storage device.
MY problem is, this has become about alot more than what Im going to do once I get back into windows. It has been bugging the hell out of me, and I REALLY need to get back in, but Im just running dry. There is absolutely NO information out there about this(well, for the blackbird 2 I should say)
I'll list everything I've found so far, if anyone at all has some words of wisdom, a suggestion, or even knows how to do it...please help me out before my head explodes..
Device/Controls:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--Top//
--Bottom//
Screens and Functions Achieved Thus Far:
--Normal Boot (Hold Power) //
--Basic Boot (Hold Sound Toggle In the Down Position While Holding Power)//
--No Screen Boot #1 (Hold Power Button While Holding Down Arrow On Keypad)
Center Ring is Lit!
--No Screen Boot #2 (Hold Reset + Power + Down Arrow on Keypad)//
Both Center and Outer Ring Lit!
--Windows CE Boot (Unknown)
Instructions on how to Achieve Windows Mode on Alpine BlackBird 1 (PMD-100):
Here procedure for enterin in WinCE 4.2
1. Plug device in charger.
2. Reset the device in the hole taster,
3. Power on while press and hold arrow up,
4. Relise power and hold arrow up,
5. When screen for update map is show don't touch anything on the screen
6. Press and hold Right taster
7. After few seconds you will see WinCE desktop with 9 icons.
Click to expand...
Click to collapse
USB Connectivity only appears to be viable when the device is in "Basic Boot". At that point it appears a s a mass storage device.
ANY HELP would be GREATLY appreciated. You can tell how much this is bugging me based on how in-depth I made this thread.
As stated before there is NO information on how to do this, so this is practically a developing thread. ANY comments to further this are appreciated!
Thank you!
bump? :/
heroskyy said:
bump? :/
Click to expand...
Click to collapse
yes please! bump!
i too got to play with windows ce and all the fun apps that alpine stacked on my unit. all of which worked until a faithful reboot and now i can get any screen action unless i use the vol dwn pwr button method. i'm stuck. i use this in my truck quite often (mostly for the mp3 player and bluetooth functions) but i'm pissed i potentially bricked this piece. if only i had made a BACKUP! anyway. let's see if we can crack this case and get on with the fun stuff! (like miopocket 4.0)
edit: also when trying to apply the patch for the pmd b200p (which worked the first time) it now hangs at 26%... no idea...
Nothing like reviving an old thread, right? I just bought one of these on ebay and it's on the way right now. I think I found instructions on another site to get to the Windows CE environment for this device but can't confirm it without the device itself. I have an IVA-W505 and want to either force updated navteq maps to the device or better yet, replace the GPS application entirely. I hear the one alpine puts on there is rather buggy so I've been trying to find alternative options for GPS but want to make sure I can get some up-to-date maps. Also wanted to look into some cool applications and interfaces and see if maybe I can figure out how exactly it starts working when docked inside the alpine head unit. Too much to learn and sadly, not much experience trying to figure out how exactly a device works.
I've been collecting links for reference once I get the device, if anyone wants them let me know and I'll try to find them all and post them. I work from 8:00 AM - 4:30 PM EDT/GMT -4 so I can probably respond pretty quickly within that time frame but may respond a little slower outside that time frame.
If anyone has any suggestions for things I can do or requests for information I should try to collect please let me know, I am hoping to have the device by the end of next week
---------- Post added at 10:56 AM ---------- Previous post was at 10:51 AM ----------
I found the instructions to access Windows CE (unconfirmed till I get my device to test) and put them below with the link I found them at:
to unlock the PMD-B200P (the "second" version with Alpine's own version of IGO), you need to reset it, hold the up arrow when powering on. then when the update screen appears, reset it again and this time you need to hold the music button when powering up.normaly this works. if it doesn't (sometimes it doesn't, I don't know why), restart the whole procedure).
then you get a screen where you can choose to launch the satnav, WinCE, update, ... at the right bottom, there is a button "enable/disable menu" . if you set it to enable menu, everytime the unit is powered on you will come to this screen.
I am running this unit now with IGO8 and it works great.
- just empty the "flashdrive". if it's not visible, go to "control panel", "storage manager", select "IDE hard disk", on the right panel, select "properties" and then select "mount". and close all windows.
- copy the IGO map to the flashdrive and rename it "Alpine"
- in the Alpine folder, rename the IGO.exe to AlpineNavi.exe and you are ready to go :dance:
Click to expand...
Click to collapse
http://gpsunderground.com/forum/alpine/3219-pmd-b200-nve-p1-unlock.html
If someone is able to test this, let me know if it works?
So after many attempts and further research I don't seem to be having much luck with accessing the Windows CE desktop on this device. I'm going to keep trying of course. Any suggestions for getting further toward getting any kind of unlock would be greatly appreciated
i used the update for the uk model to give me a boot option to load to windows ce instead of the nav software. i'm currently running navon (igo 8.3.5) for gps and it's working great! i'm currently trying to get bluetooth to work as it used to. sorry for such a vague post but if any of you are still tinkering with the blackbird please contact me! would love to share notes!
Alpine PMD-200B attached to Alpine IVA-D106R
Hi to the list
Hope posting in the right section.
I ownn an Alpine PMD-B200P iattached to an Alpine IVA-D106R and i would like
to update it either software and maps.
I have tried changing the IGO8o software with an early release but since i use the PMD
without the autoradio source ( as portable ), everything works great but as i attach it
to the source, the Navigator keeps working OK but i get no audio from the car
speakers, not even the Tick on the display.
Anybody can help me to solve the problem or it is possible to unlock it but does
still work also attached to the Autoradio?
Any help will be really appreciated.
Thanks in advance
Enzo.
unlock
Works 4 me i made the 2.0 upgrade it said upgarde not complete ERROR bla bla bla , i reset and voila i have my boot menu from where i can acces win ce and from there i instaled IGO primo, and i am using it since then, at start it gives the boot menu i select win ce and im good not so bad ooh my unit is Blackbird pmd-b200 (American old version! not the second one ! )
MarkoDaniel said:
Works 4 me i made the 2.0 upgrade it said upgarde not complete ERROR bla bla bla , i reset and voila i have my boot menu from where i can acces win ce and from there i instaled IGO primo, and i am using it since then, at start it gives the boot menu i select win ce and im good not so bad ooh my unit is Blackbird pmd-b200 (American old version! not the second one ! )
Click to expand...
Click to collapse
Please can you tell me how to do to have the boot menu from where you can acces win ce?
Thanks
Enzo
verry simple
ik8ozv said:
Please can you tell me how to do to have the boot menu from where you can acces win ce?
Hello Follow this steps ! download pmd-b200 last update , unzip to pc first !, copy to sd, insert sd, reset unit, hold sound down and power on simultan, let it do the upgrade ! it wil say at end error but dont bother reset and you done you get the boot menu from where you can acces wince ENJOY !
Click to expand...
Click to collapse
MarkoDaniel said:
ik8ozv said:
Please can you tell me how to do to have the boot menu from where you can acces win ce?
Hello Follow this steps ! download pmd-b200 last update , unzip to pc first !, copy to sd, insert sd, reset unit, hold sound down and power on simultan, let it do the upgrade ! it wil say at end error but dont bother reset and you done you get the boot menu from where you can acces wince ENJOY !
Click to expand...
Click to collapse
I already have pmd-b200 last update.
Click to expand...
Click to collapse
MarkoDaniel said:
ik8ozv said:
Please can you tell me how to do to have the boot menu from where you can acces win ce?
Hello Follow this steps ! download pmd-b200 last update , unzip to pc first !, copy to sd, insert sd, reset unit, hold sound down and power on simultan, let it do the upgrade ! it wil say at end error but dont bother reset and you done you get the boot menu from where you can acces wince ENJOY !
Click to expand...
Click to collapse
Hello,
i cannot get it go.
What i have done is:
Downloaded from the Alpine site the file called FU_PMD-B200P_20_20091008.zip.
Unzipped it and got a folder called FU_PMD-B200P_20_20091008.
Opened the folder and got 3 folders and 3 files.
Copied them in the root of a 512MB SDCARD.
Inserted the SD CARD in the PMD.
Pressed the Reset Button.
While pressing the Music button ( the one on the right side ) i've pressed the power on button and keeped pressed both.,
but i do not get into the WINCE.
I have noticed that keeping pressed both the buttons, i can see on the display the word
Loading...
and after about 25 seconds i get the Alpine Logo and then the navigation program loading till the end.
Nothing happens.
Please am i missing any step?
Any help?
Thanks
Enzo.
Click to expand...
Click to collapse
MarkoDaniel said:
ik8ozv said:
Please can you tell me how to do to have the boot menu from where you can acces win ce?
Hello Follow this steps ! download pmd-b200 last update , unzip to pc first !, copy to sd, insert sd, reset unit, hold sound down and power on simultan, let it do the upgrade ! it wil say at end error but dont bother reset and you done you get the boot menu from where you can acces wince ENJOY !
Click to expand...
Click to collapse
Please does anybody use the PMD-B200P attached to a Source.
I am using it with an autoradio Alpine IVA D-106R but after have tried or to update the Igo8 or to update
a map as i attach it to the sorce i get the voice disappearing.
If anyboody ha success can please help me to do so?
Any help will be really appreciated.
Enzo
Click to expand...
Click to collapse
1moretime
you have to : RESET !
Push POWER and Volume down !
IT goes in update mode !
if you have the update memory card it must be in the UNIT !
then when it finish the update 100% you reset !
when unit restartes it shuld try to update the bluetoth and the navi software but it shuld say CheckSum file error !
Reset !
and it goes in BOOT MENU ! from vhere you choose WinCE
---------- Post added at 09:24 AM ---------- Previous post was at 09:16 AM ----------
i use my PMD-B200 with a IVA-B200 , it works great and i can acces IGO , WinCE, Bluetoth, So i can use my IVA-W205 screen with the WinCE like a TABLET BUTT ! my problem the PMD-B200 Memory its 1 root 32 MB and the other root 64MB how can i acces the 4 GB memory ? if i run BLUETOTH and IGO at once it says not enough memory !!!
HOW CAN I ACCES THE 4GB memory ? PLEASE HEALP !
MarkoDaniel said:
you have to : RESET !
Push POWER and Volume down !
IT goes in update mode !
if you have the update memory card it must be in the UNIT !
then when it finish the update 100% you reset !
when unit restartes it shuld try to update the bluetoth and the navi software but it shuld say CheckSum file error !
Reset !
and it goes in BOOT MENU ! from vhere you choose WinCE
---------- Post added at 09:24 AM ---------- Previous post was at 09:16 AM ----------
i use my PMD-B200 with a IVA-B200 , it works great and i can acces IGO , WinCE, Bluetoth, So i can use my IVA-W205 screen with the WinCE like a TABLET BUTT ! my problem the PMD-B200 Memory its 1 root 32 MB and the other root 64MB how can i acces the 4 GB memory ? if i run BLUETOTH and IGO at once it says not enough memory !!!
HOW CAN I ACCES THE 4GB memory ? PLEASE HEALP !
Click to expand...
Click to collapse
Please how did you had success to let it workattached to a Source.
I am using it with an autoradio Alpine IVA D-106R but after have tried, or to update the Igo8 or to update
a map as i attach it to the sorce i get the voice disappearing.
Please can you help me to do so?
Any help will be really appreciated.
thanks in advace
Enzo
do what i adviced u
i gave u all vhat i did and worked for me try it ! 1 more time i can not acces the 4 gb memory SOMEONE ? noone tryes to get to the bottom of this **** ?
---------- Post added at 04:44 PM ---------- Previous post was at 04:30 PM ----------
Did u managed to find a way to get the machine runing ? im sttuck in the same situation eny healp is welcomed thank you
MarkoDaniel said:
i gave u all vhat i did and worked for me try it ! 1 more time i can not acces the 4 gb memory SOMEONE ? noone tryes to get to the bottom of this **** ?
Does it work also when you attach it to the source?
Iget it muted when i attach it to the source.
Are you trying whit an updated Igo8 or just the original?
Finally if you are using an update Igo8 can you pass me the files?
Thanks
Enzo
Click to expand...
Click to collapse
ik8ozv said:
MarkoDaniel said:
i gave u all vhat i did and worked for me try it ! 1 more time i can not acces the 4 gb memory SOMEONE ? noone tryes to get to the bottom of this **** ?
Does it work also when you attach it to the source?
Iget it muted when i attach it to the source.
Are you trying whit an updated Igo8 or just the original?
Finally if you are using an update Igo8 can you pass me the files?
Thanks
Enzo
Click to expand...
Click to collapse
Enzo, I have a 1 version of this thing, had it for several years and it still works attached to my radio in the car.
I am also willing to give away the audio for a better navigation, but today is the first time I ever find out anything about this device.
Where did you get Igo8, did you use the procedure described in the first 3d?
I have actually 2 blackbirds 1, 1 works in the car, the other one is stuck on update because I had a cd with no code, and was thinking on cracking the one that is "blocked" and keep 2 units in the car.
This is really interesting!!!
Click to expand...
Click to collapse
freddy2081 said:
ik8ozv said:
Enzo, I have a 1 version of this thing, had it for several years and it still works attached to my radio in the car.
I am also willing to give away the audio for a better navigation, but today is the first time I ever find out anything about this device.
Where did you get Igo8, did you use the procedure described in the first 3d?
I have actually 2 blackbirds 1, 1 works in the car, the other one is stuck on update because I had a cd with no code, and was thinking on cracking the one that is "blocked" and keep 2 units in the car.
This is really interesting!!!
Click to expand...
Click to collapse
I use the PMD-B200 v.2.0 that i do not know if it is the same as the ones you used.
I got the Igo8 from the web and followed the procedure in the first 3rd.
I repeat whichever Igo8 i put in thePMD it works perfectly but since i attach it to the,
the audio goes off.
Plese can you send me maybe in PM the igo that you use?
Thanks
Enzo
Click to expand...
Click to collapse
ik8ozv said:
freddy2081 said:
I use the PMD-B200 v.2.0 that i do not know if it is the same as the ones you used.
I got the Igo8 from the web and followed the procedure in the first 3rd.
I repeat whichever Igo8 i put in thePMD it works perfectly but since i attach it to the,
the audio goes off.
Plese can you send me maybe in PM the igo that you use?
Thanks
Enzo
Click to expand...
Click to collapse
I didn't do anything to mine, it's a PMD-B100, not even a 200, and as of now is still "stock"
I have to try to play around with the one that is stuck on the update screen and see if I can make anything work on it.
Click to expand...
Click to collapse

Downgrade Software version of TCL L55C8US Android TV

Good day,
I have got TCL Android TV model No. L55C8US with software version: V8-R851T02-LF1V252.011680
I want to downgrade software version to: V8-R851T02-LF1V187.008562
My questions are:
1- Is it possible?
2- Where can I get this version (V8-R851T02-LF1V187.008562)?
3- how can install the version into the TV?
Your feedback is highly appreciated.
Regards.
Yes. It's possible.
Celesw.tcl.com/Test/software/V8-R851T02-LF1V187.rar
Why to downgrade? There's v322 near by.
coolek33 said:
Yes. It's possible.
Celesw.tcl.com/Test/software/V8-R851T02-LF1V187.rar
Why to downgrade? There's v322 near by.
Click to expand...
Click to collapse
Thank you for your reply. My friend has got same TV with older version and my observation is the Brightness and 4K Videos is better than in latest versions.
coolek33 said:
Yes. It's possible.
Celesw.tcl.com/Test/software/V8-R851T02-LF1V187.rar
Why to downgrade? There's v322 near by.
Click to expand...
Click to collapse
Would you tell me how do I proceed with installing the software to the TV?
I downloaded the software file that has provided by you and I copied to USB flash drive after format FAT-32.
when I'm trying update local mode it shows error box, it says that No avaliable update file please insert USB device with software package.
I'm very sure that the USB is healthy and it's recognized by the TV.
Please help.
If it's in update.img format:
Hold power button on remote and choose power off. Or power off normally and und unplug the TV from from power.
Next with flash drive plugged to usb power on TV by press and hold the physical button on TV (not remote) until the led light on TV starts to flash. And wait.
It can question about older firmware so you have to agree.
coolek33 said:
If it's in update.img format:
Hold power button on remote and choose power off. Or power off normally and und unplug the TV from from power.
Next with flash drive plugged to usb power on TV by press and hold the physical button on TV (not remote) until the led light on TV starts to flash. And wait.
It can question about older firmware so you have to agree.
Click to expand...
Click to collapse
Thank you for your reply. I did exactly what you advised. But still it didn't proceed with the installation. Please find video url it would explain the problem.
https://drive.google.com/file/d/1PHLNzio6p7ntoYMe4xaqSxfQHeMLquDB/view?usp=drivesdk
Please advise.
Gohamad said:
Thank you for your reply. I did exactly what you advised. But still it didn't proceed with the installation. Please find video url it would explain the problem.
https://drive.google.com/file/d/1PHLNzio6p7ntoYMe4xaqSxfQHeMLquDB/view?usp=drivesdk
Please advise.
Click to expand...
Click to collapse
It's done! Software file (update.img) it has to be directly in USB-flash drive without sub-folder.
I recommend to install this version V8-R851T02-LF1V187.008562 instated of the latest one because the Brightness and 4K Videos is better and more clearly.
Thanks all.
Hi i recently buy tcl 55c8 model when i play any shows or movies it playback as smooth motion i have to disable it. I also trying to downgrade or update software and also try different picture settings like movie or judder reduction but still video play in smooth motion or with memc. If any one know how to disable it please let me know. and also audio and video are not in sync so please help me to sort out this problem.
Gohamad said:
It's done! Software file (update.img) it has to be directly in USB-flash drive without sub-folder.
I recommend to install this version V8-R851T02-LF1V187.008562 instated of the latest one because the Brightness and 4K Videos is better and more clearly.
Thanks all.
Click to expand...
Click to collapse
Hi you have the firmware file for this TV. Please share if you have thanks.
Ashsoni said:
Hi you have the firmware file for this TV. Please share if you have thanks.
Click to expand...
Click to collapse
All versions discuss here is very OLD !.
Look for latest firmware (V727) in this thread.....
TCL Android TV model 55p8m / Android Recovery TCL/BeyondTV/BeyondTV
My TCL Android TV model 55p8m has stuck and can't press any key in remote. The screen gives options to - Try Again - Factory data reset, but do not know how to select one of this option and continue without a keyboard or remote connected to the...
forum.xda-developers.com
@stasiof , thanks for reply this version will works for my TV? Model is tcl l55c8us.
@stasiof, I am not able find zip file can you share me link please.
I posted you thread where to look....post....#4,241
Edit:
V8-R851T02-LF1V727 OTA

TCL 65P815 firmware update problem and few things

Hi,
My problem is with 65P815. Fabric software was v084, i tried to update to V191 official version from TCL page, but after update and turning off TV, there is nothing shows on screen. I hear only sounds, and remote clicks, menu gone etc.
I search for info, and go back to v083 software, that helped and fixed TV. But now I don't know what to do to fix my TV. Tried to update with factory reset, nothing helped. Any tips how to deal with it ?
Next thing is concerned with soundbar thing, I have LG soundbar, is it possible to control soundbar over TCL's remote ? On my old Samsung TV it worked normally.
Here in TCL I don't see option to choose sound sourec (tv speaker/optical/hdmi), there is no option to mute TV speaker and move sound to soundbar. For now I use 2 remotes, but I want to use only one like in Samsung. I connected soundbar with optical cable to my TV.
Hi there. Trapped into same thing. After flash, I can hear 'bing' when you navigating in menu, backlight is working, but screen still black. Tried to flash V191(Inserted stick to USB2.0 with Update.img and plugged in with power button pressed). But got same thing. Led is blinking during i suppose flashing, but after that - nothing. Can it be somehow reset to stock or whatever?
you have to go back to 0.83
Turn off the TV, plug out the cable. put the drive into usb 2.0, press power button on TV's back and plug in power cord, if led start blinking wait about 10 mins to finish flashing. Sometimes you have to do this twice and TV will be ok.
Write to TCL support about your problem, let them prepare patch
Hmm... I have couple of questions then.
Does that mean v083 firmware didn't published somewhere?
And does that mean that we can't update 65p815 to any new firmware with Android 11?
what was your native FW ?
I tried to update to V191 which is on android 9, and update was failure. There is something wrong with the FW
File upload and sharing. Large file transfers. Free online cloud storage.
Visit this link to download: V8-R51MT02-LF1V083.zip
files.fm
here you can find v0.83
Android 11 is in beta now, we have to wait for official final update
I didn't check my original fware version. I know that was very stupid, but i supposed that just platform is matter.
Thanks for link. Will try this fware. Hope that will help, because i don't like to waste time with support, that usually just redirects to another operator...
it should, try second time if the first will failure
Ok, i just finish downloading and i'll start bring that baby to life. Thanks for help. Will report if suceed.
report it to TCL support to make technical request, and to fix that firmware
Ok. Just flashed twice. God damn, you have been right! All works like charm!
If someone will be as "lucky" as me, steps are next:
1. Load to local pc zip from above.
2. Format flash stick with FAT32 and copy it to root.
3. Insertt stick into USB 2.0 port.
4. Turn off TV power physycally.
5. Press and hold On/Off button on a TV's back and plug TV holding button pressed.
6. Hold for 10 secs, the led in front of TV will start blinking - it is ok.
7. Wait till it will stop blinking and wait some 5 mins after that.
8. Repeat steps 4-7. After TV restart it will show TCL logo and Android welcome screen will appear.
Ok now we should think about how to flash properly new version of FW,
latest official firmware is
https://www.mediacenter.tcl.eu/uploads/common/R51M_Android_P_V191.zip
When I try to flash with it, from menu update/local it works but only first time. When I turn off TV, then screen is black
I found such instruction, what to do after installation
Press the Settings button in the remote control:
Press OK on the icon: Picture.
Then go to the line Advanced settings.
Scroll down to the line: Brightness settings.
Scroll down to the line: Contrast.
With the remote control, do the key sequence: 6 4 2 5
The special menu appears.
Go to the line “Reset All” and press OK.
Go to the line “Reset Shop” and press OK.
Now unplug the main power cord.
Wait for ~2 minutes.
Plug back the main power cord and perform complete installation.
Click to expand...
Click to collapse
but haven't tested it yet.
Guys, can you post "Project ID" of your P815?
As ,for firmware V191 supose to be as attached....
50P815.....285
55P815.....284
65P815.....283,305
TV panel type can be found in service menu.....Main menu (1950)...
Just grabbed my panel name.
stasiof said:
Guys, can you post "Project ID" of your P815?
As ,for firmware V191 supose to be as attached....
50P815.....285
55P815.....284
65P815.....283,305
TV panel type can be found in service menu.....Main menu (1950)...
Click to expand...
Click to collapse
Seems on mine 65P815 by your table, the code should be ST6451D02-3 (code 305), but i have ST6451D02-H (code 283).
I have flashed v272 (img file) from v084 to my 65P815. Flashing went smoothly with no black screen ecountered. v272 works nicely with no problem.
TCL Android TV model 55p8m / Android Recovery TCL/BeyondTV/BeyondTV
My TCL Android TV model 55p8m has stuck and can't press any key in remote. The screen gives options to - Try Again - Factory data reset, but do not know how to select one of this option and continue without a keyboard or remote connected to the...
forum.xda-developers.com
@ancifil said:- "Did you reboot your TV after that?"
Sure I had rebooted it after flashing as I have been using this firmware for about a month.
I remembered flashing it 2 times. The first time was not successful (can't remember due to what). The second time reflash (same as what you did as in post #10) was smooth and without any problem.
jngiag, looks like it should, as for me... Maybe, i shall try 272 one more time.
superfly86, did you try 272?
jngiag said:
I remembered flashing it 2 times. The first time was not successful (can't remember due to what). The second time reflash (same as what you did as in post #10) was smooth and without any problem.
Click to expand...
Click to collapse
Btw, one thing. Can you remember, after you had flashed 272 first time and after that launched flash menu, to flash second time, was you able to see menu?
ancifil said:
Btw, one thing. Can you remember, after you had flashed 272 first time and after that launched flash menu, to flash second time, was you able to see menu?
Click to expand...
Click to collapse
I think it was due to a request to input pin while I was trying to setup live TV. I did not know the pin so I powered it off and reflashed as in post #10. Sorry, I can't remember it exactly.
ancifil said:
Seems on mine 65P815 by your table, the code should be ST6451D02-3 (code 283), but i have ST6451D02-H (code 305).
Click to expand...
Click to collapse
Your 65P815 with panel ST6451D02-H...... Project ID MUST be 283.
This is your problem with firmware (black screen ) !
So you need to change ID number from 305 to 283.
To modify the project ID, when TV is ‘ON’, with the remote control do the key sequence
0 6 2 5 9 8 .....MENU.... 283.
At the end of the key sequence the TV must reboots alone if the project ID has been understood by the TV. If it doesn’t, update the product with the last software available and try again.
Sometimes several tries can be necessary for successful project ID modification.
stasiof said:
Your 65P815 with panel ST6451D02-H...... Project ID MUST be 283.
This is your problem with firmware (black screen ) !
Click to expand...
Click to collapse
I've got that. But the hard thing is that i will not see this manipulation... I have to do that blindly. Risky stuff, right?

Soft locked my Android TV?

So...
I was dumb enough to play with the developer options hoping to find an option to deactivate adaptive screen resolution. instead i clicked on something and now my tv is kinda soft locked. at first it was stuck in a boot loop, eventually went into recovery mode here and there (see attachment, maybe there are some informations that could help solving the problem) , but i couldn't select/press anything bc this tv only has a power button. Later i found out you can use an USB keyboard to select stuff in recovery mode. So i grabbed my keyboard and waited for the RM screen. but it wouldn't show up. idk why but now its booting "normally", even shows the android logo. but then its just black. eventually the TV turns off and then back on, over and over. i tried every button combination I could find on the whole internet. Nothing seemed to work. One combination got me some hope but that hope disappeared quickly: i unplugged the TV, held the powerbutton, plugged the TV back in, still holding the power button, and waited.
after a short time it showed me a monitor looking like symbol with a gear icon on it and the gear was crossed with a red X. under it it was saying "error". (see attachment) ("Fehler" means "error" it's german)
so here i am. idk how i get it back into recovery mode so i can try that keyboard method.
and since i got that TV from my gramps, I don't have much information about it either. just got the TV and the remote from him.
I just know that it's the TCL 43EP640 respectively 43EP640X1. (Theres a sticker on the back of the TV, see attachment) so yea. I've heard you can update the firmware/software using an USB stick but idk how and i couldn't find any firm-/software for this TV
If you've read to this point and have an answer to my problem: I Love you
Need to flash with any IMG software (firmware) file....
Latest.....
Android 9....V662
Android 11...V715
Search in this thread...
TCL Android TV model 55p8m / Android Recovery TCL/BeyondTV/BeyondTV
My TCL Android TV model 55p8m has stuck and can't press any key in remote. The screen gives options to - Try Again - Factory data reset, but do not know how to select one of this option and continue without a keyboard or remote connected to the...
forum.xda-developers.com
stasiof said:
Need to flash with any IMG software (firmware) file....
Latest.....
Android 9....V662
Android 11...V715
Search in this thread...
TCL Android TV model 55p8m / Android Recovery TCL/BeyondTV/BeyondTV
My TCL Android TV model 55p8m has stuck and can't press any key in remote. The screen gives options to - Try Again - Factory data reset, but do not know how to select one of this option and continue without a keyboard or remote connected to the...
forum.xda-developers.com
Click to expand...
Click to collapse
i truly have no clue how to do any of these. could you help me out? explain to me like I'm 5
prixtn said:
i truly have no clue how to do any of these. could you help me out? explain to me like I'm 5
Click to expand...
Click to collapse
Please, take time and read in forum I posted...thx.
Edit:
Sample for same thread......#3,725
You need to flash IMG file
stasiof said:
Please, take time and read in forum I posted...thx.
Edit:
Sample for same thread......#3,725
You need to flash IMG file
Click to expand...
Click to collapse
but where do i get the firmware files?
prixtn said:
but where do i get the firmware files?
Click to expand...
Click to collapse
In that thread, everything is there.
Use search function....type... V662 or V715 and you will found.

Categories

Resources