So i updated my Vodafone UK ATCT to Stock ATD3 and the autofocus feels a lot faster even battery life feels improved i never had none of that green tint issue but i felt my Battery drain so fast and heat up on ATCT but the issues i was facing seems to have gone away after i updated to this version. Anyone else had any decent results from this version?
xTheDevilx said:
So i updated my Vodafone UK ATCT to Stock ATD3 and the autofocus feels a lot faster even battery life feels improved i never had none of that green tint issue but i felt my Battery drain so fast and heat up on ATCT but the issues i was facing seems to have gone away after i updated to this version. Anyone else had any decent results from this version?
Click to expand...
Click to collapse
https://twitter.com/UniverseIce/status/1247736072651472896
Ice universe @universeIce
At present, China's unique Galaxy S20 series TD1 firmware has significantly improved the fingerprint recognition experience and changed the fingerprint entry logic. This is an update worthy of your expectations.
https://twitter.com/UniverseIce/status/1247104992143532033
Ice universe @universeIce
Four days after updating the TCT firmware, China updated the Galaxy S20 series firmware TD1 again, once again improving the focus, HDR, and fine-tuning the transition animation. There are other improvements to be discovered.
zjhao said:
https://twitter.com/UniverseIce/status/1247736072651472896
Ice universe @universeIce
At present, China's unique Galaxy S20 series TD1 firmware has significantly improved the fingerprint recognition experience and changed the fingerprint entry logic. This is an update worthy of your expectations.
https://twitter.com/UniverseIce/status/1247104992143532033
Ice universe @universeIce
Four days after updating the TCT firmware, China updated the Galaxy S20 series firmware TD1 again, once again improving the focus, HDR, and fine-tuning the transition animation. There are other improvements to be discovered.
Click to expand...
Click to collapse
Nice that looks really promising so we should see that in 2 weeks from now? Thank god i put the unlocked version of the firmware on my phone since it takes Vodafone UK ages to get the updates.
TD3 already out - the phone is still getting hot (not as hot) and battery is slightly better but problems still are
also i noticed the phone charges really slow after this update to the point where if you're using it while charging is actually not charging
xTheDevilx said:
Nice that looks really promising so we should see that in 2 weeks from now? Thank god i put the unlocked version of the firmware on my phone since it takes Vodafone UK ages to get the updates.
Click to expand...
Click to collapse
Can I ask, when you installed the unlocked version did you do a wipe? I'm currently on Vodafone locked and can see the updates come a good week or two after BTU versions so I was considering doing the same, I did with previous Samsung phones I've owned. I've used Odin so I know what to do it's just been a while so thought I'd ask the question and if I'm right if I use Home_CSC that doesn't wipe does it?
T.I.A
xTheDevilx said:
Nice that looks really promising so we should see that in 2 weeks from now? Thank god i put the unlocked version of the firmware on my phone since it takes Vodafone UK ages to get the updates.
Click to expand...
Click to collapse
How'd you manage to change the CSC I haven't seen anything that says you can so far.
samuel2706 said:
How'd you manage to change the CSC I haven't seen anything that says you can so far.
Click to expand...
Click to collapse
You need to use samkey. You need to install on a laptop etc and buy credits. The best place to buy credits is ebay. It only takes 1 credit to change csc.
tim2london said:
TD3 already out - the phone is still getting hot (not as hot) and battery is slightly better but problems still are
also i noticed the phone charges really slow after this update to the point where if you're using it while charging is actually not charging
Click to expand...
Click to collapse
I haven't noticed any charging issues but i do charge my phone slowly cause i have a theory having it charging fast can put more wear on the battery and give it a less life span but that's just me.
maverick1103 said:
Can I ask, when you installed the unlocked version did you do a wipe? I'm currently on Vodafone locked and can see the updates come a good week or two after BTU versions so I was considering doing the same, I did with previous Samsung phones I've owned. I've used Odin so I know what to do it's just been a while so thought I'd ask the question and if I'm right if I use Home_CSC that doesn't wipe does it?
T.I.A
Click to expand...
Click to collapse
Yeah i did a full wipe this is the one i used from SamFW https://samfw.com/firmware/SM-G988B/BTU/G988BXXU1ATD3 You're correct Home_CSC doesn't completely wipe it it's the CSC_OMC which completely does the wipe i did the CSC_OMC cause i wanted to make sure nothing was left on it when i did the unlocked firmware.
samuel2706 said:
How'd you manage to change the CSC I haven't seen anything that says you can so far.
Click to expand...
Click to collapse
I think the CSC are multi universal so just did the update via Odin i read somewhere that you have to be on ATCT in order to flash the unlocked ATD3 though.
west2cool said:
You need to use samkey. You need to install on a laptop etc and buy credits. The best place to buy credits is ebay. It only takes 1 credit to change csc.
Click to expand...
Click to collapse
So i only need to buy 1 credit? there any way to do it without paying someone?
west2cool said:
You need to use samkey. You need to install on a laptop etc and buy credits. The best place to buy credits is ebay. It only takes 1 credit to change csc.
Click to expand...
Click to collapse
I didn't do this i just flashed the BTU version on to my Vodafone UK and got the update.
xTheDevilx said:
I didn't do this i just flashed the BTU version on to my Vodafone UK and got the update.
Click to expand...
Click to collapse
Might try that then instead, cheers for the help.
samuel2706 said:
Might try that then instead, cheers for the help.
Click to expand...
Click to collapse
No problem this is the ATD3 that i flashed with BTU
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
xTheDevilx said:
I didn't do this i just flashed the BTU version on to my Vodafone UK and got the update.
Click to expand...
Click to collapse
Flashing BTU file does not mean you will get the unlocked BTU software when it comes out before VOD. You will have to changed the csc in order to receive BTU update as VOD and BTU are from the same multi csc. Additionally changing the csc will get rid of any carrier apps, boot screen etc.
So i can just download the BTU updated software (currently on O2's software) and it'll work fine? I have been out of the android game for so long wow haha
west2cool said:
Flashing BTU file does not mean you will get the unlocked BTU software when it comes out before VOD. You will have to changed the csc in order to receive BTU update as VOD and BTU are from the same multi csc. Additionally changing the csc will get rid of any carrier apps, boot screen etc.
Click to expand...
Click to collapse
Noticed that still had the Vodafone app but i don't get no Vodafone splash screens which is good. But i didn't want to wait for Vodafone cause they take ages to dish out firmwares.
xTheDevilx said:
No problem this is the ATD3 that i flashed with BTU
Click to expand...
Click to collapse
Look at where it says Software Provider Ser Ver. Note yours says VOD so you will still get updates from VOD and not BTU. Points to note mines was originally VOD but I have changed it to BTU and have received BTU update since.
west2cool said:
Look at where it says Software Provider Ser Ver. Note yours says VOD so you will still get updates from VOD and not BTU. Points to note mines was originally VOD but I have changed it to BTU and have received BTU update since.
Click to expand...
Click to collapse
Oh yeah noticed that so basically is there any issue with having BTU firmware on a VOD S20 Ultra?
xTheDevilx said:
Oh yeah noticed that so basically is there any issue with having BTU firmware on a VOD S20 Ultra?
Click to expand...
Click to collapse
Basically to get the best benefit of BTU is to change the csc to BTU. Secondly if you flash BTU onto a VOD you will still get VOD.
Related
Hello. I have already placed the order a few days ago. My brother sent me some coupon for a 128gb ceramic version and I didn't understand how they sell it so considerably cheaper than on other websites, but now I realize it is probably because the units they use are the China version with the ROM replaced by the store. They call it "international version" rather than "global version" to be confusing.
Their selection of different versions available for purchase was also confusing, but now I realize the one option they named "GLOBAL VERSION 6GB RAM 64GB ROM" which is considerably more expensive is the only official global version (it is even more expensive than the 128gb Mi 6 available in my country's local shops, which is weird because the shops here sell official global models).
Anyway, to my understanding hardware-wise the China and the official global models of the Mi 6 are identical (they support the same frequency bands). My order will probably come with China charger and an adapter, though. But with regards to the ROM, to my understanding these resellers put what you people call a "shop ROM", which is not an exact version of the official global ROM? What's the difference? I'm afraid they might be adding "unwanted software" when they're modifying the ROM, so I want to know whether I can (and should) wipe their shop ROM and install the official Xiaomi one.
Thanks in advance.
Flashing a global rom doesn't take much don't be worried
But you need to spend 3 days at least with the current rom as you have to wait for xiaomi to let you unlock the bootloader
So get it request unlocking your device and connect your device to your mi account
Then just wait for 3 days and flash the new rom
Sent from my MI 6 using Tapatalk
ArinAbdul said:
Flashing a global rom doesn't take much don't be worried
But you need to spend 3 days at least with the current rom as you have to wait for xiaomi to let you unlock the bootloader
So get it request unlocking your device and connect your device to your mi account
Then just wait for 3 days and flash the new rom
Sent from my MI 6 using Tapatalk
Click to expand...
Click to collapse
Hello, thanks for the reply.
I've read some earlier posts of people trying to flash official global ROMs on their store-ROM Chinese Xiaomis and getting a brick. Apparently there's a certain way to get it done as some said it worked in the end.
But, I didn't understand whether OTA works afterwards or you need to manually install the new ROM whenever an update is available? Is there also any security concerns when using a phone with store ROM flashed by GearBest?
I don't have knowledge about "store rom"
But i believe the hardware is the same
I don't think you end up with a brick
Always stick with official global rom if you are concerned about security stff
Anyways the OTA won't be too much necessary for me at least because i wanted that google camera app so much so i rooted it eventually and also there forum is a nice place they post the updates and its eazy to download and install
ArinAbdul said:
I don't have knowledge about "store rom"
But i believe the hardware is the same
I don't think you end up with a brick
Always stick with official global rom if you are concerned about security stff
Anyways the OTA won't be too much necessary for me at least because i wanted that google camera app so much so i rooted it eventually and also there forum is a nice place they post the updates and its eazy to download and install
Click to expand...
Click to collapse
Rooting disables OTA? I'm not really familiar with Android modding.
Let's see if anyone here is familiar with the specific situation I'm asking about.
I ordered a MI6 couple months ago and it came with the Global Stable and with the bootloader unlocked. Everything works as it should since then. I even flashed a TWRP and I currently use a custom ROM
Also, since I have a partnership with the GearBest, they stopped flashing their phones with fake ROMs and they only flash Global ROMs if they are available.
As you, I got the ceramic version from Gearbest through a temporary special offer, at a very convenient price, much lower than the standard version.
It arrived in Dec. (ca. 1 month for delivery to Italy) with the official global stable, and was perfectly usable just out of the box.
From that, moving to the global developer was almost immediate, without unlocking the bootloader.
I am now using a custom rom, mainly because they claim the GPS settings are better optimized for western countries and because I hope a (more) usable porting of the google camera will be soon or later available.
t-shock said:
I ordered a MI6 couple months ago and it came with the Global Stable and with the bootloader unlocked...
Click to expand...
Click to collapse
fandan said:
As you, I got the ceramic version from Gearbest through a temporary special offer, at a very convenient price, much lower than the standard version.
It arrived in Dec. (ca. 1 month for delivery to Italy) with the official global stable, and was perfectly usable just out of the box...
Click to expand...
Click to collapse
So how can I verify whether the version installed is the official global ROM instead of a "fake ROM"? Why were GearBest even using fake ROMs?
And I understand the bootloader must come already unlocked by the store?
Regarding the price: I paid for the ceramic 128gb $389. For the "global 64gb" version, GearBest ask for $506. I can find in local stores a 128gb Mi 6 for about $500 (and less than $450 in a city except from VAT); I don't know whether it is ceramic or glass, but I assume the stores here sell the official global model, so it's quite weird GearBest ask for more money for a 64gb version than what the 128gb version goes for locally.
(btw, is there any glass screen protector you recommend? I can't find anything that's certainly good. I can see almost all options don't completely cover the front, but I'll be using a case as well.)
TLxda-d said:
So how can I verify whether the version installed is the official global ROM instead of a "fake ROM"? Why were GearBest even using fake ROMs?
Click to expand...
Click to collapse
The MIUI version is indicated in the settings. A google search can confirm if it is an original Xiaomi rom or not. Anyway I got almost immediately the OTA update to the latest global. Possibly they developed these "fake roms" to sell xiaomi phones outside China when no official translations of miui were available
TLxda-d said:
And I understand the bootloader must come already unlocked by the store?
Click to expand...
Click to collapse
No, the bootloader (at least in my case) was looked.
TLxda-d said:
Regarding the price: I paid for the ceramic 128gb $389. For the "global 64gb" version, GearBest ask for $506. I can find in local stores a 128gb Mi 6 for about $500 (and less than $450 in a city except from VAT); I don't know whether it is ceramic or glass, but I assume the stores here sell the official global model, so it's quite weird GearBest ask for more money for a 64gb version than what the 128gb version goes for locally.
Click to expand...
Click to collapse
Yes, it's weird. maybe the ceramic version is not so popular? It is a nice object, but damn slippery and heavy. I also paid it around 350 euros, that was less than the standard 128, but more than the 64.
TLxda-d said:
(btw, is there any glass screen protector you recommend? I can't find anything that's certainly good. I can see almost all options don't completely cover the front, but I'll be using a case as well.)
Click to expand...
Click to collapse
Not wise, but I am not using any protection
fandan said:
The MIUI version is indicated in the settings. A google search can confirm if it is an original Xiaomi rom or not. Anyway I got almost immediately the OTA update to the latest global. Possibly they developed these "fake roms" to sell xiaomi phones outside China when no official translations of miui were available
Click to expand...
Click to collapse
Yeah, I heard some reviews of Xiaomi phones referring to how they used to have bad English translations. Perhaps they were talking about the phones that came with "fake ROMs".
fandan said:
No, the bootloader (at least in my case) was looked.
Click to expand...
Click to collapse
But isn't unlocking the bootloader required in order to flash a different ROM on an Android phone?
fandan said:
Yes, it's weird. maybe the ceramic version is not so popular? It is a nice object, but damn slippery and heavy. I also paid it around 350 euros, that was less than the standard 128, but more than the 64.
Click to expand...
Click to collapse
I'm not sure whether the local stores sell the ceramic version. I'm referring to how the local stores should usually sell the official global version and yet the 128gb offered here is cheaper than the global 64gb offered on GearBest.
I ended up ordering the "original Xiaomi silicone soft case" and some screen protector called "Asling" from GB. Used some of the GB points gained from the Mi 6 purchase to get a few dollars off, though it seems to limit how big of a discount you may claim in regards to the size of the purchase, so it didn't allow me to use all of the points.
TLxda-d said:
But isn't unlocking the bootloader required in order to flash a different ROM on an Android phone?
Click to expand...
Click to collapse
Sure. if the phone was released with the global miui directly by xiaomi the bootloader is locked and the only rom you can install without unlocking is the global developer (look at the miui site).
For using any other rom you have to unlock the bootloader, flash recovery, flash rom, ...etc. There are a number of detailed guides around.
If the phone comes with a shop rom, or the global miui was installed by the shop, it could happen that the bootloader is already unlocked, but I think that this case now is almost improbable.
fandan said:
Sure. if the phone was released with the global miui directly by xiaomi the bootloader is locked and the only rom you can install without unlocking is the global developer (look at the miui site).
For using any other rom you have to unlock the bootloader, flash recovery, flash rom, ...etc. There are a number of detailed guides around.
If the phone comes with a shop rom, or the global miui was installed by the shop, it could happen that the bootloader is already unlocked, but I think that this case now is almost improbable.
Click to expand...
Click to collapse
But if the phone I will be getting, and most likely the one you have ordered from GearBest as well, is the China model, why would it come directly from Xiaomi's factory with the Global ROM? The main reasoning behind the lower price for these China units when their frequency support is actually the same is that they're only ment for the Chinese market when they leave the factory with the Chinese ROM. The other differences is the Chinese type plug on the charger and the Chinese writing on the back of the phone (does yours have it?), but combining these with Global ROM on Xiaomi's behalf seems strange...
MAYBE they make these for foreigners living in China (though I don't think installing the phone with Google services when it's intended for local usage is allowed in China), but perhaps there's simply a way to relock to bootloader and that is what GearBest is doing?
mi 6 64gb version
i have received today the 64gb version i have ordered from gearbest for 352$. after seeing this article i still have my suspicious about the originality of this rom.
here is a pic of the specs below, i think it will be helpful for me and the other who seek to find the true.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i took a physical pic of the phone so this is why there's Chinese text
blazsoul said:
i have received today the 64gb version i have ordered from gearbest for 352$. after seeing this article i still have my suspicious about the originality of this rom.
here is a pic of the specs below, i think it will be helpful for me and the other who seek to find the true.
i took a physical pic of the phone so this is why there's Chinese text
Click to expand...
Click to collapse
Looks fine to me.
Is there an update available bringing you to MIUI 9?
You can also check if the bootloader is locked or unlocked by enabling developer settings and then taping bootloader status
If it is unlocked it only means they flashed the Global ROM onto the Chinese phone which is fine.
Your warranty should be with gearbest either way so if there is a problem you deal with them and they deal with Xiaomi.
You're not likely to get a "shop ROM" anymore for phones that have a Global version officially.
My Mi 6 128 GB is the Chinese MTC1 variant but came with the global ROM and locked bootloader which I have since unlocked and flash AOSPA.
It was from an independent reseller in Russia. I'm assuming I have no warranty haha
Dobsgw said:
Looks fine to me.
Is there an update available bringing you to MIUI 9?
You can also check if the bootloader is locked or unlocked by enabling developer settings and then taping bootloader status
If it is unlocked it only means they flashed the Global ROM onto the Chinese phone which is fine.
Your warranty should be with gearbest either way so if there is a problem you deal with them and they deal with Xiaomi.
You're not likely to get a "shop ROM" anymore for phones that have a Global version officially.
My Mi 6 128 GB is the Chinese MTC1 variant but came with the global ROM and locked bootloader which I have since unlocked and flash AOSPA.
It was from an independent reseller in Russia. I'm assuming I have no warranty haha
Click to expand...
Click to collapse
But how can a Chinese Mi 6 that had the Global ROM installed remain bootloader locked? Isn't it required to unlock it in order to flash a different ROM than the one it came with?
And I know they say to check whether the MIUI version number in your phone's "about" matches an official one by Xiaomi, but isn't it possible that someone distributing a "fake ROM" also adjusted the version number being displayed?
mi 6 64gb version
Dobsgw said:
Looks fine to me.
Is there an update available bringing you to MIUI 9?
You can also check if the bootloader is locked or unlocked by enabling developer settings and then taping bootloader status
If it is unlocked it only means they flashed the Global ROM onto the Chinese phone which is fine.
Your warranty should be with gearbest either way so if there is a problem you deal with them and they deal with Xiaomi.
You're not likely to get a "shop ROM" anymore for phones that have a Global version officially.
My Mi 6 128 GB is the Chinese MTC1 variant but came with the global ROM and locked bootloader which I have since unlocked and flash AOSPA.
It was from an independent reseller in Russia. I'm assuming I have no warranty haha
Click to expand...
Click to collapse
after checking in the adb, its seems like the device came locked.
and yes, i have the system update alert(v9.0.2.0.NCAMIEI)
blazsoul said:
after checking in the adb, its seems like the device came locked.
and yes, i have the system update alert(v9.0.2.0.NCAMIEI)
Click to expand...
Click to collapse
Then its all good
TLxda-d said:
But how can a Chinese Mi 6 that had the Global ROM installed remain bootloader locked? Isn't it required to unlock it in order to flash a different ROM than the one it came with?
And I know they say to check whether the MIUI version number in your phone's "about" matches an official one by Xiaomi, but isn't it possible that someone distributing a "fake ROM" also adjusted the version number being displayed?
Click to expand...
Click to collapse
Even if Xiaomi is mainly oriented toward the Chinese market, and Mi6 (all the versions) is a device for the Chinese market (no band 20...), Xiaomi is anyway opening towards other countries:
for example in 2017 Xiaomi stores opened in Spain, Xiaomi phones (MI6 included) are officially distributed by Amazon.es, and the same is planned for Italy in 2018.
Not sure, by they possibly officially sell their products also in India...
These phones are natively equipped with the Global MIUI, so no need to unlock any bootloader. I am not surprised that also Chinese shops are now shipping these products abroad.
fandan said:
Even if Xiaomi is mainly oriented toward the Chinese market, and Mi6 (all the versions) is a device for the Chinese market (no band 20...), Xiaomi is anyway opening towards other countries:
for example in 2017 Xiaomi stores opened in Spain, Xiaomi phones (MI6 included) are officially distributed by Amazon.es, and the same is planned for Italy in 2018.
Not sure, by they possibly officially sell their products also in India...
These phones are natively equipped with the Global MIUI, so no need to unlock any bootloader. I am not surprised that also Chinese shops are now shipping these products abroad.
Click to expand...
Click to collapse
The phone arrived pretty quickly (2 weeks). The seal of the box was missing, though, so it means the shop (most likely) did open it. I previously tried to get a Lenovo P2 from India (because in this case they actually had a version with more frequency support than that of the Chinese version), and the forwarding service I considered using told me they will have 5o
fandan said:
Even if Xiaomi is mainly oriented toward the Chinese market, and Mi6 (all the versions) is a device for the Chinese market (no band 20...), Xiaomi is anyway opening towards other countries:
for example in 2017 Xiaomi stores opened in Spain, Xiaomi phones (MI6 included) are officially distributed by Amazon.es, and the same is planned for Italy in 2018.
Not sure, by they possibly officially sell their products also in India...
These phones are natively equipped with the Global MIUI, so no need to unlock any bootloader. I am not surprised that also Chinese shops are now shipping these products abroad.
Click to expand...
Click to collapse
The phone arrived pretty quickly (2 weeks). The seal of the box was missing, though, so it means the shop (most likely) did open it. I previously tried to get a Lenovo P2 from India (because in this case they actually had a version with more frequency support than that of the Chinese version), and the forwarding service I considered using told me they will have to open the phone and drain the battery due to air shipping rules. I don't know if that's BS, but if it's a reason to open to unbox the phone - my Mi 6 came with an almost-full battery charge.
Hello, I am sorry for the stupid question but really can find a definite answer to it. If I purchase a MAX 3 now from China, obviously with Chinese rom, will I be able to flush it with Global rom once they have global version of the phone and will the phone update with OTA from there on? I suppose there shouldnt be a problem if the Global version of the phone is identical to the Chinese version (the only kind available so far). But is this the case historically with Xiaomi's devices? Thanks for your advises.
Neznam123 said:
Hello, I am sorry for the stupid question but really can find a definite answer to it. If I purchase a MAX 3 now from China, obviously with Chinese rom, will I be able to flush it with Global rom once they have global version of the phone and will the phone update with OTA from there on? I suppose there shouldnt be a problem if the Global version of the phone is identical to the Chinese version (the only kind available so far). But is this the case historically with Xiaomi's devices? Thanks for your advises.
Click to expand...
Click to collapse
Yes, you can. I saw a lot of people flashing China rom on global rom so, reverse will be possible too
selvarajrajkanna said:
Yes, you can. I saw a lot of people flashing China rom on global rom so, reverse will be possible too
Click to expand...
Click to collapse
That's why i have already ordered from gearbest with the discount code VNWJBBZC you can easily flash whatever you want when you unlock the bootloader remember or flash a official rom when released .goodluck
jutley said:
That's why i have already ordered from gearbest with the discount code VNWJBBZC you can easily flash whatever you want when you unlock the bootloader remember or flash a official rom when released .goodluck
Click to expand...
Click to collapse
how much for this phone? i will never not wait for this phone. i've had mi max one (4gb, 128gb) and is one of the best phone ever created
1642wlmi said:
how much for this phone? i will never not wait for this phone. i've had mi max one (4gb, 128gb) and is one of the best phone ever created
Click to expand...
Click to collapse
I paid £278.97 128gb 6gb Ram from geekbuying
Hello, thanks for all replies. In aliexpress there are already listings for Global version. How could we verify these are real?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Neznam123 said:
Hello, thanks for all replies. In aliexpress there are already listings for Global version. How could we verify these are real?
Click to expand...
Click to collapse
I think its a fake firmware as its not been officially released yet take it with a pinch of salt its so easy to flash official firmware on chinese when its released anyway.
We are still waiting for the TWRP for Mi Max 3!
Hopefully, it will be out soon somewhere!
jutley said:
I paid £278.97 128gb 6gb Ram from geekbuying
Click to expand...
Click to collapse
I want one too but what's the likelyhood of customs charging you the 20% VAT (Plus the admin fee) on top of that?
I haven't had much experience ordering stuff like this from abroad so it will be good to know the odds!
Spankle said:
I want one too but what's the likelyhood of customs charging you the 20% VAT (Plus the admin fee) on top of that?
I haven't had much experience ordering stuff like this from abroad so it will be good to know the odds!
Click to expand...
Click to collapse
If you are worried about customs. For instance if you live in the EU.
Then buy from a seller who puts a man-in-the-middle and ships first to a EU member country and then to your destination country and you will avoid both import fee and whatever percentage VAT your country use.
This is how we bought our Redmin note 4 Mido but it shipped from Italy instead of Great Britain as specified in the ad below.
https://www.aliexpress.com/store/pr...agon-636-Octa-Core-6/3010045_32897985587.html
Xiaomi are starting to be sold by local electronic store all around Europe so you and even I might not even need to buy mine from overseas.
But the chances are the VAT and all fees going to add up so it might not be worth it even so and will be cheaper to import anyway.
But hang on a minute. There is new articles published about the Mi Max 3 Pro yesterday.
If you want that one maybe hold on a few more weeks to see what happens.
jutley said:
That's why i have already ordered from gearbest with the discount code VNWJBBZC you can easily flash whatever you want when you unlock the bootloader remember or flash a official rom when released .goodluck
Click to expand...
Click to collapse
i cant find the mi max 3 on gearbrest ... what's the url ?
STEKAM said:
i cant find the mi max 3 on gearbrest ... what's the url ?
Click to expand...
Click to collapse
Sorry it was geekbuying but to be honest i found out Mi max 3 pro is out soon so waiting for that now instead.
jutley said:
Sorry it was geekbuying but to be honest i found out Mi max 3 pro is out soon so waiting for that now instead.
Click to expand...
Click to collapse
Hi Could you please give more details on why you think a pro version would be out soon? Besides the appearance in Qualcomm's website are there other news on the matter?
Neznam123 said:
Hi Could you please give more details on why you think a pro version would be out soon? Besides the appearance in Qualcomm's website are there other news on the matter?
Click to expand...
Click to collapse
The Pro popped up on the official Xiaomi site and the NCC has a listing for a device from Xiaomi matching the Mi Max 3 Pro.
So, there you go.
If original Rom come with AntiRollback, it's harder to switch to global Rom
Zanr Zij said:
If original Rom come with AntiRollback, it's harder to switch to global Rom
Click to expand...
Click to collapse
Thats new and great information to be aware of!
You can read more about that here: https://forum.xda-developers.com/redmi-note-5-pro/how-to/faq-questions-answered-t3816185
To know if your device is affected type this is fastboot:
Code:
fastboot getvar anti
The displayed output : 3 shall mean you're fine while 4 shall mean you're in the Anti-Rollback squad.
3.Is the ROM global ROM? Does it have multi-language and Google Play?
It's Chinese version. We will flash global ROM. It has multi-language and Google Play after flashing. It can upgrade by OTA.
Does this sound legid to you? What kind of rom they would be flashing if there is no official Global version yet or so we think? This is the major Xiaomi aliexpress seller....
usgaap said:
The Pro popped up on the official Xiaomi site and the NCC has a listing for a device from Xiaomi matching the Mi Max 3 Pro.
So, there you go.
Click to expand...
Click to collapse
Looks like the Pro rumours have been squashed I was holding out to see if that version came to light. It's a massive shame.
https://www.gizmochina.com/2018/07/...killed-snapdragon-710-variant-does-not-exist/
Andy4Shurr said:
Looks like the Pro rumours have been squashed I was holding out to see if that version came to light. It's a massive shame.
https://www.gizmochina.com/2018/07/...killed-snapdragon-710-variant-does-not-exist/
Click to expand...
Click to collapse
Thats a bummer
Anyway it would be strange of them to announce one standard lower end model Mi Max 3 and then a few weeks later another more powerful choice of configuration.
They would probably had them showed off at the same keynote.
SUPERUSER said:
Thats a bummer
Anyway it would be strange of them to announce one standard lower end model Mi Max 3 and then a few weeks later another more powerful choice of configuration.
They would probably had them showed off at the same keynote.
Click to expand...
Click to collapse
Yeah, it would have made more sense. The only thing I could have thought was that they wanted to sell more of the lower spec'd units first and maximise sales that way.
Either way, it's a shame
This is my first smart watch form Samsung how long does it take for software update take. I'm from UK seen there has been an update for the galaxy watch last week but still have not received it yet.
The update was for the older gear watches so if you have the galaxy watch you have the latest update.
BlackCatO8 said:
The update was for the older gear watches so if you have the galaxy watch you have the latest update.
Click to expand...
Click to collapse
There is an update for the galaxy watch i think the update is only 38.64mb
It's on samfirmware page.
https://www.sammobile.com/tag/galaxy-watch/
Got an update to BSA4 of 62.98MB this morning. Overall stability improvement, bug fixes, improved reliability of heart rate monitoring sensor, improved battery life.
rmcomer said:
Got an update to BSA4 of 62.98MB this morning. Overall stability improvement, bug fixes, improved reliability of heart rate monitoring .
What country are u in?
Click to expand...
Click to collapse
UK still nothing...BRK3 latest one.. :crying:
Barmenchik said:
UK still nothing...BRK3 latest one.. :crying:
Click to expand...
Click to collapse
Yeah same in the UK still waiting.
rmcomer said:
got an update to BSA4 of 62.98mb this morning. Overall stability improvement, bug fixes, improved reliability of heart rate monitoring, improved battery life.
What country are u in?
Click to expand...
Click to collapse
California, USA
If you're familiar enough with Odin and flashing Samsung smartphones, flashing firmware to the Galaxy Watch with NetOdin is also pretty straight forward.
I just managed to flash the BSA4 firmware to my SM-R800 as it hasn't yet reached my country yet (Australia).
Huey85 said:
If you're familiar enough with Odin and flashing Samsung smartphones, flashing firmware to the Galaxy Watch with NetOdin is also pretty straight forward.
I just managed to flash the BSA4 firmware to my SM-R800 as it hasn't yet reached my country yet (Australia).
Click to expand...
Click to collapse
SO WHERE DID YOU DOWNLOAD IT???.......google is not helping me
edwardob said:
SO WHERE DID YOU DOWNLOAD IT???.......google is not helping me
Click to expand...
Click to collapse
chill out with the caps mate.
what are you looking for, the firmware or NetOdin?
firmware.... thanks
Russia and Ukraine get today but not UK!!! :crying:
Just letting you know the update is out now in the uk
Available in Netherlands as well.
Sent from my SM-G965F using Tapatalk
Isn't BSA4 the latest software build for the S3?
I had my update 3 days ago on UK its on the phone gear app
gruuvin said:
Isn't BSA4 the latest software build for the S3?
Click to expand...
Click to collapse
Nevermind. looks like R800XXU1BSA4 is listed right here: http://doc.samsungmobile.com/SM-R800/001397180827/eng.html
I'm in the USA on T-Mobile, and if I go into the phone's Galaxy Watch app > About watch > Update watch software, it comes back having the latest, which is R800XXU1BRK3.
Are others in the USA not getting their update?
Just received my unlocked Galaxy Watch LTE and activated it on T-Mobile. Received this Update shortly after.
Does anyone have emui 10 update for C185?
Myne still on October patch emui 9.1.0.345
Tysovwik said:
Does anyone have emui 10 update for C185?
Myne still on October patch emui 9.1.0.345
Click to expand...
Click to collapse
Did u try update for emui 10 in the hicare app?
Sendt fra min CMR-W09 med Tapatalk
BigDisplay said:
Did u try update for emui 10 in the hicare app?
Sendt fra min CMR-W09 med Tapatalk
Click to expand...
Click to collapse
Yes, it's get me same result "no update", region setting UAE. As I know, no one C185 users have emui 10 update.
I have not received yet. Tried changing the regions, no luck. I will wait for the stable version of EMUI 10 which is scheduled in Dec.
I received long time a go as beta version EMUI 10 ( i was participating in beta project), now i got stable version update with latest security patch.
But my 5G version has no beta and no EMUI 10 yet
I have Mate 20x , my version is 9.1.0.345(C185E3R2P1).
I have tried all methods which is included that to change Hicare region (Denmark or Germany) for 2 weeks.
But nothing changed.. What shame that huawei bring shame upon us all.
They screwed up about relationship withusa and google, so their software department begun to collapse.
slayerking911 said:
I have Mate 20x , my version is 9.1.0.345(C185E3R2P1).
I have tried all methods which is included that to change Hicare region (Denmark or Germany) for 2 weeks.
But nothing changed.. What shame that huawei bring shame upon us all.
They screwed up about relationship withusa and google, so their software department begun to collapse.
Click to expand...
Click to collapse
Yep, shame on their shabby update methods. Funny thing is if I change my hicare app to United Arab Emirates for my c432 model I get update notification for 10.0.0.180 .[emoji1787]
Sent from my EVR-L29 using Tapatalk
lol no shame there guys. its regular updating strategy like all other manufacturers: they roll out in (regional) waves, never all at once. its always been like that, so just be patient
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
jbmc83 said:
lol no shame there guys. its regular updating strategy like all other manufacturers: they roll out in (regional) waves, never all at once. its always been like that, so just be patient
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
Click to expand...
Click to collapse
But they have brought shame to us. Whatever next? Dishonor? [emoji23][emoji1787]
Sent from my EVR-L29 using Tapatalk
Limeybastard said:
But they have brought shame to us. Whatever next? Dishonor? [emoji23][emoji1787]
Sent from my EVR-L29 using Tapatalk
Click to expand...
Click to collapse
Um no one has brought shame to me
Sent from my EVR-L29 using Tapatalk
Not to sound like a broken record, but my C636 in Europe is still stuck on 9.0.0.xxx. HiCare, no HiCare, region change, matters not.
elcidroyale said:
Um no one has brought shame to me
Sent from my EVR-L29 using Tapatalk
Click to expand...
Click to collapse
It was a bloody joke doesn't your firmware show the emoticons?
Sent from my SM-T813 using Tapatalk
Limeybastard said:
But they have brought shame to us. Whatever next? Dishonor? [emoji23][emoji1787]
Sent from my EVR-L29 using Tapatalk
Click to expand...
Click to collapse
No shame here at all, joke or not [emoji1303]
Sent from my EVR-L29 636 using Tapatalk
Here's some shame.. even the Huawei Reddit group numbers have shrunk. Now compare that with just one model Samsung subreddit group.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my EVR-L29 using Tapatalk
we nearly came to December but there is no announcement about android 10 for mate 20x c185. What a shame that other regions of mate 20x(636 or 432) had already received an security patch over android 10 update. (Emui 10)
slayerking911 said:
we nearly came to December but there is no announcement about android 10 for mate 20x c185. What a shame that other regions of mate 20x(636 or 432) had already received an security patch over android 10 update. (Emui 10)
Click to expand...
Click to collapse
To be honest, u really can't see any big difference.
I'm so disappointed.
Sent from my EVR-L29 636 using Tapatalk
BigDisplay said:
To be honest, u really can't see any big difference.
I'm so disappointed.
Sent from my EVR-L29 636 using Tapatalk
Click to expand...
Click to collapse
Agreed. Even if one reads the official Huawei description of update , it's bare bones. Been back on 9.1 and loving it.
I think there was another user on here with c185 and Emui 10.
Sent from my EVR-L29 using Tapatalk
Limeybastard said:
Agreed. Even if one reads the official Huawei description of update , it's bare bones. Been back on 9.1 and loving it.
I think there was another user on here with c185 and Emui 10.
Click to expand...
Click to collapse
C185 and emui 10 in same device how it is possible?
I got official answer from huawei UAE - update may come at the end of february 2020 for middle east region
Text of official answer:
Huawei Support Team (Huawei Device Customer Care)
Dec 2, 08:47 EET
Thank you for reaching out to Huawei Technical Support team. We're excited to hear back from you.
We do understand the urgent need of EMUI 10 update.
We really apologize for this inconvenience.
We have good news for you that the Android 10/Q upgrade Beta Plan already started in the End of October, 2019
The Hi-care Registration Open Time started in Middle of November, 2019
Please go through : HiCare APP > Services > Update.
Please note that the OTA Upgrade Start Time will be in the End of February, 2020
Please perform the below troubleshoot to be ready to obtain Android 10:
After the upgrade is completed, turning on your phone and checking whether the system has been already upgraded to the newest version through "Settings -> System -> About Phone -> Build number", and then making sure that the basic functions of the mobile phone which the version has been upgraded can be used normally.
Please note that the Beta APP applicable countries for the Middle East and Africa are:
Pakistan, South Africa, Egypt, Iran, Kuwait, Jordan, United Arab Emirates;
Kindly note that the FUT activity is a BETA campaign. As the BETA version is not yet able to maintain a stable state, only a small number of open-market phones are able to sign up for the FUT activity. All users will receive the official EMUI 10.0 version in the future, please kindly wait for our official news.
Conditions for a phone to meet for it to take part in the FUT activity:
The phone is running a C432 / C431/ C636 / C185 / C10 / C605 / C635 / C675 version and is any of the Fifth column of the above form Build numbers (The Build number is displayed in Settings > System > About phone)
The phone is not indicated as a Custom version in Settings > System > About phone.
You can obtain the newest upgrade package through "Setting -> System -> Software Update -> CHECK FOR UPDATES " to complete the upgrade.
After the upgrade is completed, turning on your phone and checking whether the system has been already upgraded to the newest version through "Settings -> System -> About Phone -> Build number", and then making sure that the basic functions of the mobile phone which the version has been upgraded can be used normally.
Make sure upgrade using the phone with Huawei official software version, and that has NOT been upgraded using other unofficial software version, otherwise upgrade will NOT succeed and may cause unknown issues.
Please do not try any other versions from any other regions or countries, otherwise upgrade will NOT succeed and may cause unknown issues.
Make sure to backup all your important data beforehand.
Make sure the available storage space on your phone is at least 6 GB.
Please ensure that at least there are 30% electric quantity left. If the electric quantity is not enough, the upgrade will be banned.
Please check if the network is OK, suggest you upgrading in Wi-Fi environment.
Let us know if you need any further assistance as we would be more than glad to help.
Have a nice and safe day.
As we are constantly focusing on improving our services, we would be very grateful if you could take a few seconds to complete the 3-question survey in below link: (Also you will receive this survey link by email within next 24 hours)
https://www.research.net/r/HuaweiMEA?c=276945
Best regards,
Huawei Support Team
Using the preinstalled
HiCare APP, you can also find the solution by yourself. Need help on service
center location, spare part price, benefits and repair progress etc.
What a shame that they have forced us to wait until february 2020. In addition that i couldn't participate to Beta of emui 10. I do consider to sell the phone. I cannot bother this idiot chinese People anymore.
HI,
it's annoying that some of the features in watch 3 are not available in Germany for at least next 6 months like BP and ECG.
Thus, is it possible to change the watch to US version to make it work?
There are some threads about changing CSC, but none as far as I could find about watch 3...
Many thanks for any help!!!!
SM-R845F is International NON US Version...
US Version for USA is SM-R845U
IMHO same warning like LTE GWA2...
Don't play...
IMHO similar nonsense like GWA2 known:
https://forum.xda-developers.com/showpost.php?p=81683551&postcount=21
+ untested on GW3...
No idea if it makes sense to kill new and expensive device in 5 Minutes...
Best Regards
adfree said:
SM-R845F is International NON US Version...
US Version for USA is SM-R845U
IMHO same warning like LTE GWA2...
Don't play...
IMHO similar nonsense like GWA2 known:
https://forum.xda-developers.com/showpost.php?p=81683551&postcount=21
+ untested on GW3...
No idea if it makes sense to kill new and expensive device in 5 Minutes...
Best Regards
Click to expand...
Click to collapse
Many thanks! yes, I said, it's german version, not US version. but the new features are already unlocked in US, therefore wanted to change. But understood that there seems to be no way currently...
I think it's an unacceptable marketing strategy from SAmsung...
many thansk!
If you mean BP/ECG...
Are you 100% sure it is allready available in USA?
For me it looks like Running Gag...
Samsung Health Monitor App work only on South Korea Phone...
And is blocked also on US Phone...
We should try to differ beteen rumours... dreams and Samsungs coming soon...
Btw, I am from Germany...
We can talk via PM in German if you want...
Best Regards
GW3 LTE version - change CSC
user8484848 said:
HI,
it's annoying that some of the features in watch 3 are not available in Germany for at least next 6 months like BP and ECG.
Thus, is it possible to change the watch to US version to make it work?
There are some threads about changing CSC, but none as far as I could find about watch 3...
Many thanks for any help!!!!
Click to expand...
Click to collapse
Hi guys!
Is there anything new about changing of CSC on Samsung GW3 845-F? Is there anyone who tested it?
About GW3... look here:
https://forum.xda-developers.com/smartwatch/samsung-galaxy-watch-3/gw3-region-change-t4148221
1 user confirmed my "modified" files as working for SM-R845F.
Best Regards
Edit 1.
XAR is part of SM-R845U.
It is NOt inside SM-R845F...
adfree said:
If you mean BP/ECG...
Are you 100% sure it is allready available in USA?
For me it looks like Running Gag...
Samsung Health Monitor App work only on South Korea Phone...
And is blocked also on US Phone...
We should try to differ beteen rumours... dreams and Samsungs coming soon...
Btw, I am from Germany...
We can talk via PM in German if you want...
Best Regards
Click to expand...
Click to collapse
Fyi - it is not available in the US yet. I don't have it