Related
I've made a TWRP backup of my system if anyone wants to try it.
It's the TW ROM, updated to MM. Made with TWRP 3.
It's a self extracting ZIP file so download to a folder on your computer before continuing.
I don't know if it'll install over the JP ROM but you're welcome to try if you like.
ADVISORY......
MAKE A BACKUP OF YOUR ROM FIRST BECAUSE I HAVE NO IDEA IF THIS WILL WORK!!
OK. Boot into TWRP and make a backup of your entire ROM.
Boot the phone to Android and connect to the computer so as you can navigate through the storage.
Using the computer, find the TWRP folder on the phone and find the last folder. It'll be called something like "Internal storage\TWRP\BACKUPS\<HT57DYW00000>" (where HT57DYW00000 is a folder with YOUR serial number as it's name).
Copy the folder you extracted into this folder, alongside your own backup.
Then, reboot into RECOVERY and select RESTORE.
Choose the SYSTEM backup you copied into your folder BUT ONLY IF YOU MADE A BACKUP OF YOUR ROM!
Wipe the CACHE and DALVIK CACHE and reboot.
Like I said, I don't know if it'll overwrite the JP ROM or if it'll work at all but if you want to try it you're welcome to.
Download from here:
https://drive.google.com/open?id=0B01V_alsJMzLcVNabjcyMXNRcm8
Incidentally, this was born of a failed attempt to make a system image using TWRP which failed a few times. Anyone managed to do this? or is it a fault with TWRP?
I think, we start porting applications from Taiwan rom stock 5.0.1 to JP romstock.
After B3 HTV31 update android 6.0, We re-started porting applications from HTC 10 rom stock to B3 JP romstock
https://www.facebook.com/BOAROM/posts/1083701208319409
Would it be safe to use this recovery from TWRP v2.8.7 or should I update to TWRP 3 first?
EDIT: Nevermind, I'll try with TWRP 3.
Well, from a KDDI stock it goes straight to the bootloader, and whatever reboot you do will take you there.
My guess is you'd have to change the CID too, at least.
ToTTenTranz said:
Well, from a KDDI stock it goes straight to the bootloader, and whatever reboot you do will take you there.
My guess is you'd have to change the CID too, at least.
Click to expand...
Click to collapse
Possibly, yeah. I wiped mine and restored it from that without any problems but I'm super CID'd so that'd work too I guess.
mrquyen1993 said:
I think, we start porting applications from Taiwan rom stock 5.0.1 to JP romstock.
After B3 HTV31 update android 6.0, We re-started porting applications from HTC 10 rom stock to B3 JP romstock
https://www.facebook.com/BOAROM/posts/1083701208319409
Click to expand...
Click to collapse
I've been using the camera from the 10 but there's not a lot of point. It doesn't really add anything to the stock camera other than looking different.
We're on the list for the JP update:
http://www.au.kddi.com/information/topic/mobile/20160304-01.html
but it hasn't been issued yet:
http://www.au.kddi.com/information/notice_mobile/update/list/
Sup guys,
I have been using the rooted original roms for a while now with the APT-x codec installed though since 4.0.3 this doesn't work any more. So I would like to downgrade to 4.0.2 for the time being. How would I go about doing this ?
Select the version of OOS you want, download it from OnePlus's site and flash it through either the stock or custom recovery.
http://downloads.oneplus.net/devices/oneplus-3/
Anova's Origin said:
Select the version of OOS you want, download it from OnePlus's site and flash it through either the stock or custom recovery.
Click to expand...
Click to collapse
Same way as upgrading to a new version? to keep root I would have to flash Supersu ?
Yep.
Can I just use the current twrp and supersu or would I need to download a older version of either?
tdmike said:
Can I just use the current twrp and supersu or would I need to download a older version of either?
Click to expand...
Click to collapse
Yes, you can.
AptX is working good on 4.0.3 with magisk module.
I'm using it at the moment.
But it's broken since 4.1.
So I just had to restore to the current version. My launcher and keyboard kept crashing and I wasn't able to install apps. Seems something went wrong. Anyone any clues?
What I did: take a nandroid, wipe dalvik cache, install 4.0.3, install most recent SuperSU. Wipe dalvik again and reboot.
I have been working on the sister models also. I saw no one was building these anymore so here it is I hope it can be enjoyed by all. Spread the word. provide feedback so other fans of this ROM may obtain it and work out any bugs if there are any. I will update once or twice a week depending on time and demand. I'm compiling for three different variants. Hit the thanks button and Enjoy. Dirty flash the updates not the initial flash of this rom but the updates to it. Initial install = Factory reset, wipe data and cache, install rom zip, install gapps zip, install su zip, reboot system. As of 9-3-18 i will be switching to Ubuntu 18.04 Bionic Beaver, that being said i do not know if i will have to change anything or do anything different to keep pushing these updates out but i will most definitely try to keep them coming.
4-10-18
https://www.androidfilehost.com/?fid=890129502657597436
4-13-18
https://www.androidfilehost.com/?fid=818070582850507491
4-17-18
https://www.androidfilehost.com/?fid=818070582850508419
4-24-18
https://www.androidfilehost.com/?fid=673956719939836620 If it's an update then dirty flash it if you already had SuperSU installed you will need to reflash the SuperSU zip if you are installing for the first time you just need to install the SuperSU app
5-4-18
https://www.androidfilehost.com/?fid=818222786056028546
Root is not baked in. Flash and root your preferable way.
5-20-18
https://www.androidfilehost.com/?fid=674106145207488021
5-31-18
https://www.androidfilehost.com/?fid=674106145207490572
7-28-18
https://www.androidfilehost.com/?fid=5862345805528060741
9-3-18
https://www.androidfilehost.com/?fid=1322778262903996744
10-07-18
https://www.androidfilehost.com/?fid=1322778262904022369
12-7-18
https://www.androidfilehost.com/?fid=11410963190603868411
12-16-18
https://www.androidfilehost.com/?fid=11410963190603876081
2-25-19
https://www.androidfilehost.com/?fid=1395089523397901582
3-24-19
https://www.androidfilehost.com/?fid=1395089523397924752
5-6-19
http://download1589.mediafire.com/7...q5/lineage-14.1-20190507-UNOFFICIAL-d2tmo.zip
10-13-19
https://www.androidfilehost.com/?fid=1899786940962607809
i recommend clean flash as i built with different computer
setprop persist.lineage.nofool true in terminal emulator with root privs (type su first grant permission then setprop persist.lineage.nofool true) gets rid of persistant notification
Bluetooth dialtone when playing music fix
Settings > Battery > tap in 3-dot menu at top right tap on Battery optimisation. To show all apps and services here, select the ‘All apps’ options under the dropdown. Tap on both of the Bluetooth services and change them to Don't optimise.
thanks bro... but is it rooted rom or use any method to root it ?
hasan.sy said:
thanks bro... but is it rooted rom or use any method to root it ?
Click to expand...
Click to collapse
I use SuperSU zip
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
hasan.sy said:
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
Click to expand...
Click to collapse
I appreciate the feedback and no worries mate I'm still trying to get the no sim bug worked out in the att variant no luck so far sprint variant is doing good also
Update posted 4-17-18
It won't boot up for me. I installed the ROM after wiping my entire system through TWRP, flashed Gapps, and installed SuperSU provided by TWRP. When it boots up it says system isn't responding.
Sammay_Boiii said:
It won't boot up for me. I installed the ROM after wiping my entire system through TWRP, flashed Gapps, and installed SuperSU provided by TWRP. When it boots up it says system isn't responding.
Click to expand...
Click to collapse
Wipe system, cache, and dalvik install rom zip install nougat Gapps and SuperSU all at the same time meaning do not reboot until you have flashed all three if it didn't work the first time try it again just make sure you wipe system, cache and dalvik and install the Gapps at the same time it sounds like it's booting up but conflicting with other elements otherwise it would be bootloop and not system isn't responding
Joker1716 said:
Wipe system, cache, and dalvik install rom zip install nougat Gapps and SuperSU all at the same time meaning do not reboot until you have flashed all three if it didn't work the first time try it again just make sure you wipe system, cache and dalvik and install the Gapps at the same time it sounds like it's booting up but conflicting with other elements otherwise it would be bootloop and not system isn't responding
Click to expand...
Click to collapse
Thank you for your rapid response! I will try that as soon as I get to my house and I'll let you know what happens
After doing what you said, it still says "process system isn't responding" I will try a few more times. Also, I'm flashing off nothing. There is no OS, no personal data, just TWRP. Does this have to be flashed on CM12 or something?
Sammay_Boiii said:
After doing what you said, it still says "process system isn't responding" I will try a few more times. Also, I'm flashing off nothing. There is no OS, no personal data, just TWRP. Does this have to be flashed on CM12 or something?
Click to expand...
Click to collapse
You need to Odin flash the latest stock firmware then root then flash recovery then flash the rom
This should help
https://forum.xda-developers.com/showthread.php?t=1949687
Joker1716 said:
You need to Odin flash the latest stock firmware then root then flash recovery then flash the rom
Click to expand...
Click to collapse
I will do that. Your rom needs to be flashed over stock rom?
Sammay_Boiii said:
I will do that. Your rom needs to be flashed over stock rom?
Click to expand...
Click to collapse
No this is lineage os 14.1 it's not mine I just build it because they have stopped doing it officially for this variant of the s3 but there's more to a phone than just the system and you have nothing but a recovery? There's bootloader modem, Efs etc. You wouldn't be able to even flash CM12. in TWRP are you going into advanced wipe or are you just swiping the slider?
Joker1716 said:
No this is lineage os 14.1 it's not mine I just build it because they have stopped doing it officially for this variant of the s3 but there's more to a phone than just the system and you have nothing but a recovery? There's bootloader modem, Efs etc. You wouldn't be able to even flash CM12. in TWRP are you going into advanced wipe or are you just swiping the slider?
Click to expand...
Click to collapse
What you said makes a lot of sense actually. Im used to just flashing back ups of other roms that I forgot how to flash fresh ones. I'm not used to this haha but I got it now. Stock rom 4.3 has been flashed via odin and the root method is currently on my screen.
hasan.sy said:
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
Click to expand...
Click to collapse
What was your system status before flashing the rom? What software? I'm having trouble flashing it on my S3
Sammay_Boiii said:
What was your system status before flashing the rom? What software? I'm having trouble flashing it on my S3
Click to expand...
Click to collapse
t999uvuenc2 firmware and bootloader 4.3 using twrp recovery 3.2.1-0..... you must update to latest official firmware t999uvuenc2 to flash any rom 5.1.1 lollipop and higher
hasan.sy said:
t999uvuenc2 firmware and bootloader 4.3 using twrp recovery 3.2.1-0..... you must update to latest official firmware t999uvuenc2 to flash any rom 5.1.1 lollipop and higher
Click to expand...
Click to collapse
Thank you. Ive been flashing this rom repeatedly and always received a "Process system not responding" then it falls into a boot loop
Update posted
Joker1716 said:
Update posted
Click to expand...
Click to collapse
Does it need wipe data and cash before flash or we can do dirty flash without any thing?(update from 13-4-2018 to this rooted update)
hasan.sy said:
Does it need wipe data and cash before flash or we can do dirty flash without any thing?(update from 13-4-2018 to this rooted update)
Click to expand...
Click to collapse
If it's an update then dirty flash it if you already had SuperSU installed you will need to reflash the SuperSU zip if you are installing for the first time you just need to install the SuperSU app
My phone is running on 10.4.5.0 EU, rooted and twrp recovery installed. Preloader not installed (it was released later).
I'd like to update as safe as possible to 11.0.3.0 EU or 11.0.6.0 global (not sure about the differences).
Normally I would just backup, flash full rom, wipe cache and reroot if necessary.
Now I'm thinking to backup, flash preloader, flash full rom, reflash preloader, wipe cache, reroot and reflash recovery. Will this work?
Did someone successfully update rooted to MIui 11 without wiping data?
This is my daily driver, I can't afford risking brick and having to bring it to service center.
Thanks in advance
Bump. Anyone?
EDIT : Now i see that you have A9 MIUI 10. Think that preloader works, but not sure. Anyway, find FASTBOOT rom of EU version Android 9 MIUI 11, after that flash preloader and do everything like i written down...
I switched many roms with this method...
The most important thing is to have Android 9 and miui 11. I managed to install Android 10 with miui 11 indonesian with just flashing FASTBOOT rom with miflash pro tool... Reverted back normally with Android 9 miui 11 golbal FASTBOOT rom with same procedure...
The most important thing is that preloader. Before anything, flash preloader, after that you can go and play with different roms and recoveries. But beware, after flashing recovery MIUI rom with custom recovery, the rom will replace patched preloader, and recovery, so you will have to flash it again, but only if you are on Android 9 miui 11. As long as i know, i think that there is no patched preloader for Android 10, so if u are going to play only with Android 9, Miui 11, this is the procedure...
I did the update that way, without deleting the data partition. Everything went ok, but when I fixed everything, I had a strong battery consumption, at least with the gps, data, wifi turned off, even in airplane mode, my battery would run out overnight, ie my cell phone was constantly active regardless of whether I use it or not. I found no cause. Some icons have remained old regardless of the theme and type of icons. The Poco launcher was terribly slow to me and trotted a little while scrolling. I gave up and did a new installation. Transferred all my stuff to pc, downloaded 11.0.3.0 firmware (3.2gb) and with miuiflash made a fresh installation (delete all without locking). And that's all it works, I'm satisfied now, I have over 10 hours of sot with gps, data, youtube and other things. The best way is fresh install in my case. Later I put twrp recovery and magisk manager and that’s it.
include <std_disclaimer.h>
/*
* Your warranty is... still valid/probably? ( Subject to OEM's)
*
*We are not responsible for bricked devices, dead SD cards
* unpleasant experiences. Custom ROM's are Custom for a reason and
* as developers, we try our best to give you the most complete experience
* When you choose our ROM, its a choice which you make but it doesnt make us
* liable to any unfortunate events. But we will be happy to help for the greater good.
/
Palladium OS is not yet another ubiquitous os but a trendsetter of its own level. The Prime focus here
are on speed, stability and above all, its a community driven os where everyone can experience their ideas
without any limitations. All these is complemented by the Meteor Fall programme which are a series of OTA updates
which adds in new features and suggestions. So, now you know why its christened The Palladium OS.
Source
Palladium: PalladiumOS
Install Instructions
Backup your personal data (Important)
- Download the ROM and GApps and transfer them to your device.
- Boot to recovery (TWRP recommended).
- Wipe the System, Cache, Data and ART/Dalvik cache.
- Flash the ROM
- Flash Gapps Zip file (Only for Vanilla variant)
- Reboot your device.
Downloads
ROM: sourceforge
GApps: NikGapps
Credits
- Google for AOSP
- LineageOS
- Project Fluid
- ShapeShift OS
- Pixel experience
- Project Streak
- Dot OS
- Octavi OS
- Bliss ROM
- AICP & POSP & Pixys Team for thread template idea
- Also many pro devlopers who all help us to bring this rom to you..
- Please let us know if we forgot to mention your name in credits..
AND TO THE PALLADIUM TEAM FOR THIS ROM
Build Author/Maintainer - Arokz Dpk
Device Name - Oneplus 5 and 5T
Device Codename -dumpling and cheeseburger
Kernel Source - https://github.com/ArokzDP/kernel_oneplus_msm8998
ROM Status - Unofficial
Android Version - 11.0
ROM Version - v1.3
thanksssssss
Wow! Thank you, is it my birthday? I will flash over the next couple of days. Thank you once again.
I have just tried to flash the gapps version. I flashed with Majisk and got stuck in a bootloop for 25 minutes. Went back into recovery, went through the wipe process again and re-flashed Palladium. I got the 'successful' flash message in Twrp, but when I went to reboot it said that there was no OS installed. I was able to flash the ROM that I was on previously (Pixel) without any problems. Maybe I had a corrupted download, sadly I don't have the time to try again right now, I will try again in a few days.
Drhedphuk said:
I have just tried to flash the gapps version. I flashed with Majisk and got stuck in a bootloop for 25 minutes. Went back into recovery, went through the wipe process again and re-flashed Palladium. I got the 'successful' flash message in Twrp, but when I went to reboot it said that there was no OS installed. I was able to flash the ROM that I was on previously (Pixel) without any problems. Maybe I had a corrupted download, sadly I don't have the time to try again right now, I will try again in a few days.
Click to expand...
Click to collapse
Am on the same gapps version and it booted jus fine for me. If the zip is corrupted u wont be getting successful flash message. Maybe try again afterwards when free. Also happy that u tried it.
Arokia said:
Am on the same gapps version and it booted jus fine for me. If the zip is corrupted u wont be getting successful flash message. Maybe try again afterwards when free. Also happy that u tried it.
Click to expand...
Click to collapse
I also guess the boot loop could be due to encrypted or decrypted thing. Try with f2fs instead...
Arokia said:
I also guess the boot loop could be due to encrypted or decrypted thing. Try with f2fs instead...
Click to expand...
Click to collapse
Okay, thank you for the advice. I will let you know.
Added to the OnePlus 5 Index Thread here.
Drhedphuk said:
I have just tried to flash the gapps version. I flashed with Majisk and got stuck in a bootloop for 25 minutes. Went back into recovery, went through the wipe process again and re-flashed Palladium. I got the 'successful' flash message in Twrp, but when I went to reboot it said that there was no OS installed. I was able to flash the ROM that I was on previously (Pixel) without any problems. Maybe I had a corrupted download, sadly I don't have the time to try again right now, I will try again in a few days.
Click to expand...
Click to collapse
Happened to me as well but i got it fixed by flashing the vanilla rom first and then let it boot, after that i rebooted back to the recovery and flashed gapps. Worked just fine. Hope this will help anyone having a similar issue
Any way to get rid of the home buttons and have a home bar instead ? Couldn't find any option like Derpfest has. Props for the great rom, I'm loving it and the battery life is just incredible.
Jalef said:
Happened to me as well but i got it fixed by flashing the vanilla rom first and then let it boot, after that i rebooted back to the recovery and flashed gapps. Worked just fine. Hope this will help anyone having a similar issue
Click to expand...
Click to collapse
Thank you very much. Which gapps package did you flash?
No good for me. Whatever I try. It says that I have successfully flashed, yet when I go to reboot it says that there is no OS installed, both versions.
Drhedphuk said:
No good for me. Whatever I try. It says that I have successfully flashed, yet when I go to reboot it says that there is no OS installed, both versions.
Click to expand...
Click to collapse
Make sure you have the zip files anywhere in your internal storage. But not inside a folder within the internal storage. Because whenever you wipe data,system,cache and dalvik it will also wipe the downloaded files inside the download folder.
Jalef said:
Make sure you have the zip files anywhere in your internal storage. But not inside a folder within the internal storage. Because whenever you wipe data,system,cache and dalvik it will also wipe the downloaded files inside the download folder.
Click to expand...
Click to collapse
I kept them in the same place that I kept Pixel ROM and was able to flash that afterwards. Plus the APK's that I had within that folder and the Majisk zip were fine too. Weird issue.
Drhedphuk said:
I kept them in the same place that I kept Pixel ROM and was able to flash that afterwards. Plus the APK's that I had within that folder and the Majisk zip were fine too. Weird issue.
Click to expand...
Click to collapse
That's actually weird because when i flashed on my end everything got deleted from there
Drhedphuk said:
No good for me. Whatever I try. It says that I have successfully flashed, yet when I go to reboot it says that there is no OS installed, both versions.
Click to expand...
Click to collapse
Maybe you should try a different recovery?! I use Orange Fox and had no problems with flashing this Rom. Installed the Vanilla version plus Nik Gapps full package.
KeinePanik said:
Maybe you should try a different recovery?! I use Orange Fox and had no problems with flashing this Rom. Installed the Vanilla version plus Nik Gapps full package
Click to expand...
Click to collapse
KeinePanik said:
Maybe you should try a different recovery?! I use Orange Fox and had no problems with flashing this Rom. Installed the Vanilla version plus Nik Gapps full package.
Click to expand...
Click to collapse
I was wondering whether my codeworx Twrp was maybe outdated. Can I flash Orange fox over the top of codeworx with a zip file?
Edit: Flashed Orange Fox, I'll try again.
Yesss!! Flashed it! It was obviously the recovery version that I was running. On the suggestion of @KeinePanik I flashed Orange Fox recovery and voila! (Thank you my friend)
My apologies to the developer and everyone else for flooding this thread with my issues.
I have been running the app for about 5 hours now and can report that it is really smooth, great battery life and some nice UI extras. Many thanks to the dev, will it go official?
Current release has june sec. patch or shall I wait for the upcoming update if it around the corner ???
m.omdaa said:
Current release has june sec. patch or shall I wait for the upcoming update if it around the corner ???
Click to expand...
Click to collapse
Security patch is May 5.