The Android encryption is the most important point for me. All the custom roms I have tried do not work, as soon as I start the encryption, the phone goes into a boot loop.
Thanks
Related
Hi,
Today I tried to flash a new version of Lineage OS on my phone, while the encryption pattern on boot was stil enabled. I didn't realise this would cause such a problem..
Right after flashing Lineage OS the way it should, a message pops on the screen asking me to enter my pattern to start the device while booting, so I entered my code after which it says my code is wrong. The strange thing is that TWRP also asks for that code on startup, except now code is working.
So I can boot in recovery mode and decrypt the device with my old code, but as soon as I try to start the rom (tried LineageOS, my Nandroid backup and AOSPA) the same code doesn't seem to work.
I've already tried this method: https://forum.xda-developers.com/nexus-6p/general/psa-twrp-backups-lockscreen-security-t3245070, but this resulted in a bootloop.
Any idea how I can get rid of this problem and start using my phone again?
Thanks alot in advance!
Fixed it by using the 'Format Data' function in the wipe screen of TWRP! :good::good:
Hey y'all! Im trying to install treble roms and I'm getting stuck at the boot animation for over 15 minutes and then the phone restarts back to stock recovery. It's not just a specific rom it's all treble ROMs as well like phh/pixel exp, havoc etc. I have flashed treble ROMs successfully in the past but this time it ain't working with me even with the instructions included and flashingg via twrp.
My problem is I'm getting stuck on the boot animation, it doesn't boot loop it just keeps on animating
which phone?
Faaris Ansari said:
which phone?
Click to expand...
Click to collapse
Mate 9
Hello, For the past two days i've been trying to get a custom ROM to work on my t999. I've tried 5 different ROMs on my t999 and none seem to work with 3 not booting and the other 2 that have major issues that they shouldn't. Before I get int the problems here's the ROM's i've tried.
-Cm 13. based on 6.0.1. - Boots with a broken setup screen that doesn't respond to touch
-Slim 6 based on 6.0.1. - Boots to black screen, only image that is shown is the power off button when you hold the power button
-LN 14.1- Based on 7.1.2. - Stuck on starting screen then follows with system process isn't responding
-Cm 14.1 based on 7.1.2. - Stuck on starting screen then follows with system process isn't responding
-Meeko based on android 7.1. - Stuck on starting screen then follows with system process isn't responding
I've installed 3 different TWRP versions from newest to old and none of them will make any differences with the ROMs i'm trying to install.
They all successfully flash and do show booting screens, but most never get passed them and the only one with a successful boot was CM 13 with the broken setup screen. I've restored the phone to its stock OS and tried several times along with trying while rooted and while not rooted. The one thing I haven't tried was trying to install the ROM while the phone was on stock i always flash with some version of TWRP but I don't think that would make an issue.
If anyone has any suggestions please let me know i'm getting desperate lol.
I recently tried to change my boot animation with the "Boot Animations for Superuser" app on the Play Store and now my phone won't boot anymore, I had the latest PixelExperience 9.0 installed and was rooted with magisk 20. When I boot up the phone it displays the "Your phone has been unlocked and can't be trusted message for around 60 seconds whilst vibrating once or twice and after that, the screen turns black and it continues to vibrate every couple of minutes. I still have access to TWRP and fastboot but I haven't found a way to get my boot animation back yet. I have flashed numerous boot animations but to no avail. I don't want to revert back to stock because I have seen various posts around here about people losing their IMEI numbers.
Does anybody have a solution?
Jz1803 said:
I recently tried to change my boot animation with the "Boot Animations for Superuser" app on the Play Store and now my phone won't boot anymore, I had the latest PixelExperience 9.0 installed and was rooted with magisk 20. When I boot up the phone it displays the "Your phone has been unlocked and can't be trusted message for around 60 seconds whilst vibrating once or twice and after that, the screen turns black and it continues to vibrate every couple of minutes. I still have access to TWRP and fastboot but I haven't found a way to get my boot animation back yet. I have flashed numerous boot animations but to no avail. I don't want to revert back to stock because I have seen various posts around here about people losing their IMEI numbers.
Does anybody have a solution?
Click to expand...
Click to collapse
Dirty Flash the PE rom and it will bring back the PE boot animation for your device and boot your device.
riyan65 said:
Dirty Flash the PE rom and it will bring back the PE boot animation for your device and boot your device.
Click to expand...
Click to collapse
just tried that, didn't work... still stuck on the Motorola your device is unlocked screen...
Jz1803 said:
just tried that, didn't work... still stuck on the Motorola your device is unlocked screen...
Click to expand...
Click to collapse
Try formatting system from advanced wipe
Then flash rom zip gapps and magisk
If it doesn't boot then your data partition has also been modified and unless you know what changes were made or you created a twrp backup before the changes were made then you will also have to format data too
TheFixItMan said:
Try formatting system from advanced wipe
Then flash rom zip gapps and magisk
If it doesn't boot then your data partition has also been modified and unless you know what changes were made or you created a TWRP backup before the changes were made then you will also have to format data too
Click to expand...
Click to collapse
Just tried formatting system and then flashing PE and it worked, however when I also flash magisk it goes back to freezing again but I guess thats not the end of the world. Anyway, thanks for the suggestions guys!!
Jz1803 said:
Just tried formatting system and then flashing PE and it worked, however when I also flash magisk it goes back to freezing again but I guess thats not the end of the world. Anyway, thanks for the suggestions guys!!
Click to expand...
Click to collapse
Flash the magisk uninstall zip first to clean up any modules you may have
Also if you are flashing cannery builds of magisk try going back to stable versions
I was on AEX and tried a new roms (Pixys, Evolution, Pixel Experience etc) and none of them booted the android.
Tried to restore AEX and even that is not booting. Phone keeps rebooting in loop without booting to any os including the restored backup.
Evolution and pixel after a clean installation says "no os".
Phone stays in start mode and does not move beyond this point.
Phone boots to twrp recovery.
Any idea what is wrong? Have corrupted the phone that it can't be used?
Is there a way out?
Quick solution would be highly appreciated.
Thanks
Anyone has a solution/suggestion for this?Deperate now since there is no alternate phone.
Thanks again
The phone boots recovery and adb commands work whereas fastboot commands don't work. I am able to flash vendor2factory and rom successfully with no error but the phone still not boot android but vibrates and goes back start screen and if i don't press any keys it restarts again after showing the ZUK logo.
I hope i have been able to explain the situation. I am still not able to boot the android despite trying more than one rom.
Anyone has any clues? Thanks
ramadurair said:
I was on AEX and tried a new roms (Pixys, Evolution, Pixel Experience etc) and none of them booted the android.
Tried to restore AEX and even that is not booting. Phone keeps rebooting in loop without booting to any os including the restored backup.
Evolution and pixel after a clean installation says "no os".
Phone stays in start mode and does not move beyond this point.
Phone boots to twrp recovery.
Any idea what is wrong? Have corrupted the phone that it can't be used?
Is there a way out?
Quick solution would be highly appreciated.
Thanks
Click to expand...
Click to collapse
I am having the same problem. I was in pixel experience and i flashed latest pixel experiences august security patch, it showed no os but it booted. But there were several bugs in the rom, i thought it was roms problem and then i tried to flash evolution, it again showed no os after flashing and then i got stuck at evolution x boot logo. So, i tried to qfil zui but to no avail, the flashing process won't even start the qpst tool just freezes after pressing the download button. Then in the twrp i noticed that battery percentage is different at different times sometimes it shows correct value but somes it won't so i thought that the problem might be from twrp and then i flashed new twrp but again same problem. Then i flashed arrow os 10.0 without gapps, it booted successfully then i flashed gapps. After sometime i tried to flash evolution x but got stuck at boot logo again. Finally i flashed arrows os again it booted successfully (i flashed rom and gapps separetly)
So, FINALLY THE TEMPORARY SOLUTION IS TO FLASH ARROW OS IT WILL BOOT SUCCESSFULLY BUT THEN AGAIN OTHER ROMS WON'T BOOT. IF I FIND ANY SOLUTION I WILL POST HERE
muralee krishna said:
I am having the same problem. I was in pixel experience and i flashed latest pixel experiences august security patch, it showed no os but it booted. But there were several bugs in the rom, i thought it was roms problem and then i tried to flash evolution, it again showed no os after flashing and then i got stuck at evolution x boot logo. So, i tried to qfil zui but to no avail, the flashing process won't even start the qpst tool just freezes after pressing the download button. Then in the twrp i noticed that battery percentage is different at different times sometimes it shows correct value but somes it won't so i thought that the problem might be from twrp and then i flashed new twrp but again same problem. Then i flashed arrow os 10.0 without gapps, it booted successfully then i flashed gapps. After sometime i tried to flash evolution x but got stuck at boot logo again. Finally i flashed arrows os again it booted successfully (i flashed rom and gapps separetly)
So, FINALLY THE TEMPORARY SOLUTION IS TO FLASH ARROW OS IT WILL BOOT SUCCESSFULLY BUT THEN AGAIN OTHER ROMS WON'T BOOT. IF I FIND ANY SOLUTION I WILL POST HERE
Click to expand...
Click to collapse
Now the phone is not even booting into recovery after i did a qfil install on zui rom. Looping into start screen only.
ramadurair said:
Now the phone is not even booting into recovery after i did a qfil install on zui rom. Looping into start screen only.
Click to expand...
Click to collapse
When you qfil, the recovery will be lost i think. But since you cannot enable usb debugging i think you wont be able to flash twrp.
---------- Post added at 07:26 AM ---------- Previous post was at 07:19 AM ----------
ramadurair said:
Now the phone is not even booting into recovery after i did a qfil install on zui rom. Looping into start screen only.
Click to expand...
Click to collapse
I think the problem is our phone is not able to boot big rom i.e. roms of size close to 1gb or more than 1gb since arrow os without gapps is only 600mb my phone is able to boot. If you are able to find the solution or get your phone repaired at any cell repair centre please let me know
bro is your phone working now