My Moto Z2 play device crashed at startup, unable to restore using recovery mode, detail: I did not activate the developer option before the problem happened so (oem locked) does not unlock.
This is the bootloader error:
Start up failed.
Your device didn't start up successfully. Use the Software Repair Assistant on computer to restart your device.
Connect your device to your computer to get the Software Repair Assistant.
Below, the following messages appear:
AP fastboot flash mode (secure)
Failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot.
boot up failed.
As it is lockdown here and all Service centers are closed and its my primary phone so I tried flashing fastboot rom but no luck there too, Any help will be appreciated.
I already did the oem unlocking procedure on the Motorola website I got the code, but it doesn't unlock because the developer option is not activated, I think.
fastboot oem unlock (XXXXXXXXXXXXX)
(bootloader) Check 'Allow OEM Unlock' in Android Settings> Developer
(bootloader) Options
OKAY [0.013s]
finished. total time: 0.014s
Here is getvar info
Cyborg>fastboot getvar all
er) version: 0.5
er) version-bootloader: moto-msm8953-C0.CD
er) product: albus
er) board: albus
er) secure: yes
er) hwrev: P4
er) radio: 4
er) storage-type: emmc
er) emmc: 64GB SKHYNIX HCG8a4 RV=08 PV=A2
er) ram: 4GB SKHYNIX LP3 DIE=8Gb M5=06 M6=
er) cpu: MSM8953
er) serialno: ZY2245VHCH
er) cid: 0x0032
er) channelid: 0xc0
er) uid: C61687FC00000000000000000000
er) securestate: oem_locked
er) iswarrantyvoid: no
er) max-download-size: 534773760
er) reason: Fall-through from normal boot
er) imei: xxxxxxxxxxxxxxxxx
er) meid:
er) date: 05-28-2017
er) sku: XT1710-10
er) carrier_sku:
er) battid: xxxxxxxxxx
er) iccid:
er) cust_md5:
er) max-sparse-size: 268435456
er) current-time:
er) ro.build.fingerprint[0]: motorola/albu
er) ro.build.fingerprint[1]: 76-12-25-23/2
er) poweroffalarm: 0
er) ro.build.version.full[0]: Blur_Version.27.451.22.albus.reta
er) ro.build.version.full[1]: il.en.US
er) ro.build.version.qcom: LA.UM.6.6.r1-04
er) version-baseband: M8953P_50.59.07.96R
er) kernel.version[0]: Linux version 3.18.
er) kernel.version[1]: [email protected]) (g
er) kernel.version[2]: 0123 (prerelease) (
er) kernel.version[3]: Mon Jun 10 02:12:5
er) sbl1.git: git=MBM-NG-VC0.CD-0-g4650d8f
er) rpm.git: git=MBM-NG-VC1.82-0-gbd19194
er) tz.git: git=72ed912-dirty
er) devcfg.git: git=72ed912-dirty
er) keymaster.git: git=72ed912-dirty
er) cmnlib.git: git=72ed912-dirty
er) cmnlib64.git: git=72ed912-dirty
er) prov.git: git=72ed912-dirty
er) aboot.git: git=MBM-NG-VC0.CD-0-g361b83
er) frp-state: protected (210)
er) ro.carrier: retin
er) current-slot:
er) slot-suffixes: _a
er) slot-count: 1
er) slot-successful:_a: INVALID
er) slot-successful:_b: INVALID
er) slot-bootable:_a: INVALID
er) slot-bootable:_b: INVALID
er) slot-retry-count:_a: unknown
er) slot-retry-count:_b: unknown
ed above
total time: 0.594s
eageryouth said:
Cyborg>fastboot getvar all
er) version: 0.5
er) version-bootloader: moto-msm8953-C0.CD
er) product: albus
er) board: albus
er) secure: yes
er) hwrev: P4
er) radio: 4
er) storage-type: emmc
er) emmc: 64GB SKHYNIX HCG8a4 RV=08 PV=A2
er) ram: 4GB SKHYNIX LP3 DIE=8Gb M5=06 M6=
er) cpu: MSM8953
er) serialno: ZY2245VHCH
er) cid: 0x0032
er) channelid: 0xc0
er) uid: C61687FC00000000000000000000
er) securestate: oem_locked
er) iswarrantyvoid: no
er) max-download-size: 534773760
er) reason: Fall-through from normal boot
er) imei: xxxxxxxxxxxxxxxxx
er) meid:
er) date: 05-28-2017
er) sku: XT1710-10
er) carrier_sku:
er) battid: xxxxxxxxxx
er) iccid:
er) cust_md5:
er) max-sparse-size: 268435456
er) current-time:
er) ro.build.fingerprint[0]: motorola/albu
er) ro.build.fingerprint[1]: 76-12-25-23/2
er) poweroffalarm: 0
er) ro.build.version.full[0]: Blur_Version.27.451.22.albus.reta
er) ro.build.version.full[1]: il.en.US
er) ro.build.version.qcom: LA.UM.6.6.r1-04
er) version-baseband: M8953P_50.59.07.96R
er) kernel.version[0]: Linux version 3.18.
er) kernel.version[1]: [email protected]) (g
er) kernel.version[2]: 0123 (prerelease) (
er) kernel.version[3]: Mon Jun 10 02:12:5
er) sbl1.git: git=MBM-NG-VC0.CD-0-g4650d8f
er) rpm.git: git=MBM-NG-VC1.82-0-gbd19194
er) tz.git: git=72ed912-dirty
er) devcfg.git: git=72ed912-dirty
er) keymaster.git: git=72ed912-dirty
er) cmnlib.git: git=72ed912-dirty
er) cmnlib64.git: git=72ed912-dirty
er) prov.git: git=72ed912-dirty
er) aboot.git: git=MBM-NG-VC0.CD-0-g361b83
er) frp-state: protected (210)
er) ro.carrier: retin
er) current-slot:
er) slot-suffixes: _a
er) slot-count: 1
er) slot-successful:_a: INVALID
er) slot-successful:_b: INVALID
er) slot-bootable:_a: INVALID
er) slot-bootable:_b: INVALID
er) slot-retry-count:_a: unknown
er) slot-retry-count:_b: unknown
ed above
total time: 0.594s
Click to expand...
Click to collapse
Is your bootloader unlocked? @eageryouth
Sherzaman Khan said:
Is your bootloader unlocked? @eageryouth
Click to expand...
Click to collapse
It's locked
I updated the post.
eageryouth said:
It's locked
I updated the post.
Click to expand...
Click to collapse
Try to miracle thunder box to allow oem unlock or use Moto lenovo smart asistance to online flash and update me
---------- Post added at 05:22 AM ---------- Previous post was at 05:21 AM ----------
eageryouth said:
It's locked
I updated the post.
Click to expand...
Click to collapse
Try to miracle thunder box to allow oem unlock or use Moto lenovo smart asistance to online flash and update me @eageryouth
---------- Post added at 05:22 AM ---------- Previous post was at 05:22 AM ----------
eageryouth said:
It's locked
I updated the post.
Click to expand...
Click to collapse
Sherzaman Khan said:
Try to miracle thunder box to allow oem unlock or use Moto lenovo smart asistance to online flash and update me
---------- Post added at 05:22 AM ---------- Previous post was at 05:21 AM ----------
Try to miracle thunder box to allow oem unlock or use Moto lenovo smart asistance to online flash and update me @eageryouth
---------- Post added at 05:22 AM ---------- Previous post was at 05:22 AM ----------
Click to expand...
Click to collapse
Tried moto lenovo tool and tried rescuing but it failed after few seconds.
I have no idea about miracle thunder box and how to use it.
Are you talking about only software or i need to have access to thunder box.
Thanks for replying.
eageryouth said:
Tried moto lenovo tool and tried rescuing but it failed after few seconds.
I have no idea about miracle thunder box and how to use it.
Are you talking about only software or i need to have access to thunder box.
Thanks for replying.
Click to expand...
Click to collapse
Download from here and install in ur pc
https://www.getdroidtips.com/download-miracle-box-setup-tool/ @eageryouth
Sherzaman Khan said:
Download from here and install in ur pc
https://www.getdroidtips.com/download-miracle-box-setup-tool/ @eageryouth
Click to expand...
Click to collapse
There's no way to enable it through miracle ?.
Now this will work as paperweight
eageryouth said:
There's no way to enable it through miracle .
Now this will work as paperweight
Click to expand...
Click to collapse
i have the same problem... =(
jonathan8113 said:
i have the same problem... =(
Click to expand...
Click to collapse
how did it happen any specific thing you tried?
=(
eageryouth said:
how did it happen any specific thing you tried?
Click to expand...
Click to collapse
I wanted to update it with a retail firmware and it stayed in fastboot mode, it was my mistake because it is verizon and I wanted to put a retail
jonathan8113 said:
I wanted to update it with a retail firmware and it stayed in fastboot mode, it was my mistake because it is verizon and I wanted to put a retail
Click to expand...
Click to collapse
Now last solution is change the Motherboard @jonathan
Related
Hello guys,
Looks like I've screwed up very badly. After an update to android 9 Pie i wanted to downgrade back to 8 following the guide on youtube (I can't post links yet)
I FORGOT to unlock the bootloader and ran the flash. And it went wrong. Now the phone freezes trying to connect to a Wi-Fi (i can't skip it) and I'm clueless what to do next. Maybe you can help me?
The data i have available on the bootloader:
BL: MBM-2.1-aljeter_retail-02dae09-190122
Baseband: <not found>
Product/Variant: jeter XT1922-3 32GB P4
Serial Number {i dont think it's necessary}
CPU: {i think irrelevant}
eMMC: {i think irrelevant}
DRAM: {i think irrelevant}
Console [NULL]: null
Tools Mode Config: DSABLED
Battery OK
oem_locked
Medawk said:
Hello guys,
Looks like I've screwed up very badly. After an update to android 9 Pie i wanted to downgrade back to 8 following the guide on youtube (I can't post links yet)
I FORGOT to unlock the bootloader and ran the flash. And it went wrong. Now the phone freezes trying to connect to a Wi-Fi (i can't skip it) and I'm clueless what to do next. Maybe you can help me?
The data i have available on the bootloader:
BL: MBM-2.1-aljeter_retail-02dae09-190122
Baseband: <not found>
Product/Variant: jeter XT1922-3 32GB P4
Serial Number {i dont think it's necessary}
CPU: {i think irrelevant}
eMMC: {i think irrelevant}
DRAM: {i think irrelevant}
Console [NULL]: null
Tools Mode Config: DSABLED
Battery OK
oem_locked
Click to expand...
Click to collapse
EDIT: I managed to get this info too:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-aljeter_retail-02dae09-190122
(bootloader) product: jeter
(bootloader) board: jeter
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 5
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG GX6BMB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 3GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
(bootloader) cpu: MSM8937
(bootloader) serialno: ZL62225459
(bootloader) cid: 0x0032
(bootloader) channelid: 0x00
(bootloader) uid: 8122A81100000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 351844090939113
(bootloader) meid:
(bootloader) date: 05-18-2018
(bootloader) sku: XT1922-3
(bootloader) carrier_sku: XT1922-3
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Mar 28 11:32:34 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/aljeter/aljeter:9/PPPS29.
(bootloader) ro.build.fingerprint[1]: 55-25-2/06dbf:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.201.2.aljeter.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.6.r1-03700-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.120-perf-gccbc3e0 (hu
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20
(bootloader) kernel.version[2]: 150123 (prerelease) (GCC) ) #1 SMP PREEM
(bootloader) kernel.version[3]: PT Thu Mar 28 06:11:01 CDT 2019
(bootloader) sbl1.git: MBM-2.1-aljeter_retail-b867b3e-190122
(bootloader) rpm.git: MBM-2.1-aljeter_retail-099a494-dirty-190328
(bootloader) tz.git: MBM-2.1-aljeter_retail-f917b84-dirty-190328
(bootloader) devcfg.git: MBM-2.1-aljeter_retail-f917b84-dirty-190328
(bootloader) keymaster.git: MBM-2.1-aljeter_retail-f917b84-190328
(bootloader) cmnlib.git: MBM-2.1-aljeter_retail-f917b84-190328
(bootloader) cmnlib64.git: MBM-2.1-aljeter_retail-f917b84-190328
(bootloader) prov.git: MBM-2.1-aljeter_retail-f917b84-dirty-190328
(bootloader) aboot.git: MBM-2.1-aljeter_retail-02dae09-190122
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: reteu
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.074s
Did you already try to unlock the bootloader. You could then fastboot flash a stock rom from here https://mirrors.lolinet.com/firmware/moto/aljeter/official/RETAIL/
It worked finally, I was confused which software is the right one. Thanks!
Medawk said:
Hello guys,
Looks like I've screwed up very badly. After an update to android 9 Pie i wanted to downgrade back to 8 following the guide on youtube (I can't post links yet)
I FORGOT to unlock the bootloader and ran the flash. And it went wrong. Now the phone freezes trying to connect to a Wi-Fi (i can't skip it) and I'm clueless what to do next. Maybe you can help me?
The data i have available on the bootloader:
BL: MBM-2.1-aljeter_retail-02dae09-190122
Baseband: <not found>
Product/Variant: jeter XT1922-3 32GB P4
Serial Number {i dont think it's necessary}
CPU: {i think irrelevant}
eMMC: {i think irrelevant}
DRAM: {i think irrelevant}
Console [NULL]: null
Tools Mode Config: DSABLED
Battery OK
oem_locked
Click to expand...
Click to collapse
My moto g6 play 1922-5 ta so too. Can you solve it?
Guys, I have a serious problem and I couldn't solve it, I have 1 week with a Moto E5 Plus, I couldn't find the right ROM to flash it. For some reason I can't unlock the OEM, so I can only flash the same version or a higher one, I haven't got one or the other, I need your help, what can I do?
Here are my model info:
version: 0.5
version-bootloader: moto-msm8917-BE.4F
product: hannah
board: hannah
secure: yes
hwrev: P3
radio: 1
storage-type: emmc
emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
cpu: MSM8917
serialno: 0052257912
cid: 0x0032
channelid: 0x19
uid: FECA6A4100000000000000000000
securestate: oem_locked
iswarrantyvoid: no
max-download-size: 535822336
reason: Volume down key pressed
imei:
meid:
date: 12-17-2018
sku: XT1924-4
carrier_sku: XT1924-4
battid: SNN5998A
iccid:
cust_md5:
max-sparse-size: 268435456
current-time: "Fri Feb 7 1:21:40 UTC 2020"
ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
ro.build.fingerprint[2]: s
poweroffalarm: 0
ro.build.version.full[0]: Blur_Version.27.311.14.rhannah.re
ro.build.version.full[1]: tail.en.US
ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
version-baseband: <not found>
kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
kernel.version[3]: 2019
sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
rpm.git: git=02a0726-dirty
tz.git: git=9692555-dirty
devcfg.git: git=9692555-dirty
keymaster.git: git=9692555
cmnlib.git: git=9692555
cmnlib64.git: git=9692555
prov.git: git=9692555-dirty
aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
frp-state: protected (77)
ro.carrier: retbr
current-slot:
slot-suffixes: _a
slot-count: 1
slot-successful:_a: INVALID
slot-successful:_b: INVALID
slot-bootable:_a: INVALID
slot-bootable:_b: INVALID
slot-retry-count:_a: unknown
slot-retry-count:_b: unknown
all: listed above
When I try to flash it, I always get this:
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
What can I do to flash it? Thank you for all your help
jeanxd1301 said:
Guys, I have a serious problem and I couldn't solve it, I have 1 week with a Moto E5 Plus, I couldn't find the right ROM to flash it. For some reason I can't unlock the OEM, so I can only flash the same version or a higher one, I haven't got one or the other, I need your help, what can I do?
Here are my model info:
version: 0.5
version-bootloader: moto-msm8917-BE.4F
product: hannah
board: hannah
secure: yes
hwrev: P3
radio: 1
storage-type: emmc
emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
cpu: MSM8917
serialno: 0052257912
cid: 0x0032
channelid: 0x19
uid: FECA6A4100000000000000000000
securestate: oem_locked
iswarrantyvoid: no
max-download-size: 535822336
reason: Volume down key pressed
imei: 355552095465515
meid:
date: 12-17-2018
sku: XT1924-4
carrier_sku: XT1924-4
battid: SNN5998A
iccid:
cust_md5:
max-sparse-size: 268435456
current-time: "Fri Feb 7 1:21:40 UTC 2020"
ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
ro.build.fingerprint[2]: s
poweroffalarm: 0
ro.build.version.full[0]: Blur_Version.27.311.14.rhannah.re
ro.build.version.full[1]: tail.en.US
ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
version-baseband: <not found>
kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
kernel.version[3]: 2019
sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
rpm.git: git=02a0726-dirty
tz.git: git=9692555-dirty
devcfg.git: git=9692555-dirty
keymaster.git: git=9692555
cmnlib.git: git=9692555
cmnlib64.git: git=9692555
prov.git: git=9692555-dirty
aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
frp-state: protected (77)
ro.carrier: retbr
current-slot:
slot-suffixes: _a
slot-count: 1
slot-successful:_a: INVALID
slot-successful:_b: INVALID
slot-bootable:_a: INVALID
slot-bootable:_b: INVALID
slot-retry-count:_a: unknown
slot-retry-count:_b: unknown
all: listed above
When I try to flash it, I always get this:
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
What can I do to flash it? Thank you for all your help
Click to expand...
Click to collapse
Are you flashing rhannah Retbr ?
https://mirrors.lolinet.com/firmware/moto/rhannah/official/RETBR/
Sent from my perry_f using XDA Labs
---------- Post added at 08:09 AM ---------- Previous post was at 08:05 AM ----------
And you may want to remove the
IMEI line
Sent from my perry_f using XDA Labs
sd_shadow said:
Are you flashing rhannah Retbr ?
Sent from my perry_f using XDA Labs
---------- Post added at 08:09 AM ---------- Previous post was at 08:05 AM ----------
And you may want to remove the
IMEI line
Sent from my perry_f using XDA Labs
Click to expand...
Click to collapse
No, I've only tried TICGO and two different versions of RETAR, but neither worked. I'll download the latest RETBR version and see how it goes. Thanks for your help
Why do you say the IMEI thing?
jeanxd1301 said:
No, I've only tried TICGO and two different versions of RETAR, but neither worked. I'll download the latest RETBR version and see how it goes. Thanks for your help
Why do you say the IMEI thing?
Click to expand...
Click to collapse
getvar all shows the IMEI
It's a unique ID for the device that you may not want to post on the internet
Sent from my mata using XDA Labs
hello please have the same problem moto e5 plus, oem unlocked, have try many firmware, only fastboot mode ,
gpt error (bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BE.4F
(bootloader) product: hannah
(bootloader) board: hannah
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: ZL5223WDJH
(bootloader) cid: 0x0032
(bootloader) channelid: 0x18
(bootloader) uid: 17E0C47C00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351878090871116
(bootloader) meid:
(bootloader) date: 05-20-2018
(bootloader) sku: XT1924-4
(bootloader) carrier_sku: XT1924-4
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Dec 31 19:39:17 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
(bootloader) ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.331.14.rhannah.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8917_34.42.05.98R HANNAH_LATAMDSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=9692555-dirty
(bootloader) devcfg.git: git=9692555-dirty
(bootloader) keymaster.git: git=9692555
(bootloader) cmnlib.git: git=9692555
(bootloader) cmnlib64.git: git=9692555
(bootloader) prov.git: git=9692555-dirty
(bootloader) aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tigco
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
please help me...
pepoxxx said:
hello please have the same problem moto e5 plus, oem unlocked, have try many firmware, only fastboot mode ,
gpt error (bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BE.4F
(bootloader) product: hannah
(bootloader) board: hannah
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: ZL5223WDJH
(bootloader) cid: 0x0032
(bootloader) channelid: 0x18
(bootloader) uid: 17E0C47C00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351878090871116
(bootloader) meid:
(bootloader) date: 05-20-2018
(bootloader) sku: XT1924-4
(bootloader) carrier_sku: XT1924-4
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Dec 31 19:39:17 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
(bootloader) ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.331.14.rhannah.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8917_34.42.05.98R HANNAH_LATAMDSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=9692555-dirty
(bootloader) devcfg.git: git=9692555-dirty
(bootloader) keymaster.git: git=9692555
(bootloader) cmnlib.git: git=9692555
(bootloader) cmnlib64.git: git=9692555
(bootloader) prov.git: git=9692555-dirty
(bootloader) aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tigco
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
please help me...
Click to expand...
Click to collapse
Try LMSA'S flash rescue
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my ocean using XDA Labs
I recently unlocked my bootloader, installed TWRP and tried to root using magisk on my Motorola Moto G6 Play. However the magisk file got me into a bootloop so I reset my phone and installed the stock ROM. Now it says there is no SIM inserted. I have tried taking the SIM and and putting it back in again however that doesn't work. Please help.
Dylan:) said:
I recently unlocked my bootloader, installed TWRP and tried to root using magisk on my Motorola Moto G6 Play. However the magisk file got me into a bootloop so I reset my phone and installed the stock ROM. Now it says there is no SIM inserted. I have tried taking the SIM and and putting it back in again however that doesn't work. Please help.
Click to expand...
Click to collapse
Run
Code:
getvar all
To see correct codename and software channel
If that's the same as you flashed.
Check the flash.xml in firmware folder has same commands that you used.
Sent from my Moto E (4) using Tapatalk
sd_shadow said:
Run
Code:
getvar all
To see correct codename and software channel
If that's the same as you flashed.
Check the flash.xml in firmware folder has same commands that you used.
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
Do I run that in fastboot mode?
Dylan:) said:
Do I run that in fastboot mode?
Click to expand...
Click to collapse
Yes
Sent from my Moto E (4) using Tapatalk
is there a difference between aljeter and jeter? My phones code name is jeter however the firmware i booted is for aljeter. Would this affect the sim slots?
here is the output:
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8937-BF.55
(bootloader) product: jeter
(bootloader) board: jeter
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 6
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG GX6BMB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 3GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
(bootloader) cpu: MSM8937
(bootloader) serialno: ZL52234ZFJ
(bootloader) cid: 0x0032
(bootloader) channelid: 0x00
(bootloader) uid: E2655EED00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 351861090347642
(bootloader) meid:
(bootloader) date: 04-21-2018
(bootloader) sku: XT1922-2
(bootloader) carrier_sku: XT1922-2
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Feb 17 11:47:23 UTC 2020"
(bootloader) ro.build.fingerprint[0]: motorola/aljeter_n/aljeter_n:8.0.0
(bootloader) ro.build.fingerprint[1]: /OPP27.91-143/150:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.21.150.aljeter.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g6f5d52f-0001
(bootloader) kernel.version[1]: 0-g4728498 ([email protected]) (gcc ve
(bootloader) kernel.version[2]: rsion 4.8 (GCC) ) #1 SMP PREEMPT Tue Sep
(bootloader) kernel.version[3]: 11 04:50:07 CDT 2018
(bootloader) sbl1.git: git=MBM-NG-VBF.55-0-g8ffb6ee
(bootloader) rpm.git: git=MBM-NG-VBF.15-0-g02a0726-dirty
(bootloader) tz.git: git=MBM-NG-VBF.C8-2-ge76ade4-dirty
(bootloader) devcfg.git: git=MBM-NG-VBF.C8-2-ge76ade4-dirty
(bootloader) keymaster.git: git=MBM-NG-VBF.C8-2-ge76ade4
(bootloader) cmnlib.git: git=MBM-NG-VBF.C8-2-ge76ade4
(bootloader) cmnlib64.git: git=MBM-NG-VBF.C8-2-ge76ade4
(bootloader) prov.git: git=MBM-NG-VBF.C8-2-ge76ade4-dirty
(bootloader) aboot.git: git=MBM-NG-VBF.55-0-g4e3d3ac
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: retgb
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Finished. Total time: 0.067s
Dylan:) said:
is there a difference between aljeter and jeter? My phones code name is jeter however the firmware i booted is for aljeter. Would this affect the sim slots?
here is the output:
Click to expand...
Click to collapse
Yes they are different devices
---------- Post added at 06:19 PM ---------- Previous post was at 06:06 PM ----------
Looks like Jeter is America(s)
Aljeter is everywhere else.
There are several Aljeter models.
Where did you buy it?
Are you in the UK?
---------- Post added at 06:20 PM ---------- Previous post was at 06:19 PM ----------
Does your device have dual sim slots?
---------- Post added at 06:31 PM ---------- Previous post was at 06:20 PM ----------
In
https://mirrors.lolinet.com/firmware/moto/aljeter/official/RETGB/
There are 3 different models
Moto E5 Play
XT1921-2
XT1921-3
Moto G6 Play
XT1922-3
Not sure what is going on there.
Flash the newest firmware for jeter.
Sent from my moto g(6) play using Tapatalk
Hello all. Hoping someone can help me out. After quite a few years of being out of the phone tinkering world, I ended up with a G6 play lying around and wanted to try LOS 16.00 as a test to see if it could be a daily driver for me.But unfortunately I ended up in a boot loop somewhere. I think? I backed up the stock .IMG with ADB but reflashing what I think is the stock file, or any other .IMG files have not been working. Hoping someone can lend a hand, Thanks!
ThinkL16 said:
Hello all. Hoping someone can help me out. After quite a few years of being out of the phone tinkering world, I ended up with a G6 play lying around and wanted to try LOS 16.00 as a test to see if it could be a daily driver for me.But unfortunately I ended up in a boot loop somewhere. I think? I backed up the stock .IMG with ADB but reflashing what I think is the stock file, or any other .IMG files have not been working. Hoping someone can lend a hand, Thanks!
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
Post it here after you remove the IMEI line.
Sent from my Moto E (4) using Tapatalk
sd_shadow said:
What does getvar all say?
Code:
fastboot getvar all
Post it here after you remove the IMEI line.
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
Really appreciate the help, Thank you! If I'm not mistaken it should be the Unlocked Motorola retail model.
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-jeter_retail-20301ad15fc-200404
(bootloader) product: jeter
(bootloader) board: jeter
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 8
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SKHYNIX HAG4a2 RV=08 PV=A5 FV=00000000000000A5
(bootloader) ram: 2GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZL52289K8M
(bootloader) cid: 0x0032
(bootloader) channelid: 0x81
(bootloader) uid: B01230FF00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
----------------------------------IMEI Line removed
(bootloader) meid:
(bootloader) date: 09-15-2018
(bootloader) sku: XT1922-9
(bootloader) carrier_sku: XT1922-9
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sat Apr 4 21: 6: 2 UTC 2020"
(bootloader) ro.build.fingerprint[0]: motorola/jeter/jeter:9/PPPS29.118-
(bootloader) ro.build.fingerprint[1]: 68-9/329ef:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.201.15.jeter.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.6.r1-04300-89xx.0
(bootloader) version-baseband: M8920_34.26.11.75R JETER_NA_CUST
(bootloader) kernel.version[0]: Linux version 3.18.120-perf-gc55108dd264
(bootloader) kernel.version[1]: 9 ([email protected]) (gcc version 4.9
(bootloader) kernel.version[2]: .x 20150123 (prerelease) (GCC) ) #1 SMP
(bootloader) kernel.version[3]: PREEMPT Sat Apr 4 11:42:06 CDT 2020
(bootloader) sbl1.git: MBM-2.1-jeter_retail-5e077487fa-200404
(bootloader) rpm.git: MBM-2.1-jeter_retail-fcf56e9a-200404
(bootloader) tz.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) devcfg.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) keymaster.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) cmnlib.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) cmnlib64.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) prov.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) aboot.git: MBM-2.1-jeter_retail-20301ad15fc-200404
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: bwaca
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
sd_shadow said:
What does getvar all say?
Code:
fastboot getvar all
Post it here after you remove the IMEI line.
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
Update! So I'm still able to boot to the bootloader, and I was just able to boot into TWRP. So what would be the next step in the process? I was looking to go to LOS or something with some better privacy than stock android.
ThinkL16 said:
What does getvar all say?
Really appreciate the help, Thank you! If I'm not mistaken it should be the Unlocked Motorola retail model.
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-jeter_retail-20301ad15fc-200404
(bootloader) product: jeter
(bootloader) board: jeter
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 8
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SKHYNIX HAG4a2 RV=08 PV=A5 FV=00000000000000A5
(bootloader) ram: 2GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZL52289K8M
(bootloader) cid: 0x0032
(bootloader) channelid: 0x81
(bootloader) uid: B01230FF00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
----------------------------------IMEI Line removed
(bootloader) meid:
(bootloader) date: 09-15-2018
(bootloader) sku: XT1922-9
(bootloader) carrier_sku: XT1922-9
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sat Apr 4 21: 6: 2 UTC 2020"
(bootloader) ro.build.fingerprint[0]: motorola/jeter/jeter:9/PPPS29.118-
(bootloader) ro.build.fingerprint[1]: 68-9/329ef:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.201.15.jeter.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.6.r1-04300-89xx.0
(bootloader) version-baseband: M8920_34.26.11.75R JETER_NA_CUST
(bootloader) kernel.version[0]: Linux version 3.18.120-perf-gc55108dd264
(bootloader) kernel.version[1]: 9 ([email protected]) (gcc version 4.9
(bootloader) kernel.version[2]: .x 20150123 (prerelease) (GCC) ) #1 SMP
(bootloader) kernel.version[3]: PREEMPT Sat Apr 4 11:42:06 CDT 2020
(bootloader) sbl1.git: MBM-2.1-jeter_retail-5e077487fa-200404
(bootloader) rpm.git: MBM-2.1-jeter_retail-fcf56e9a-200404
(bootloader) tz.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) devcfg.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) keymaster.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) cmnlib.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) cmnlib64.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) prov.git: MBM-2.1-jeter_retail-f9b266cd30-200404
(bootloader) aboot.git: MBM-2.1-jeter_retail-20301ad15fc-200404
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: bwaca
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
Click to expand...
Click to collapse
Ok if you want to go back to stock use this firmware
https://mirrors.lolinet.com/firmware/moto/jeter/official/BWACA/
See
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my ali using XDA Labs
---------- Post added at 02:28 AM ---------- Previous post was at 02:25 AM ----------
ThinkL16 said:
What does getvar all say?
Update! So I'm still able to boot to the bootloader, and I was just able to boot into TWRP. So what would be the next step in the process? I was looking to go to LOS or something with some better privacy than stock android.
Click to expand...
Click to collapse
Not sure what custom ROMs are available for your device.
Look for ROMs for Jeter not Ajeter
Sent from my ali using XDA Labs
sd_shadow said:
Ok if you want to go back to stock use this firmware
https://mirrors.lolinet.com/firmware/moto/jeter/official/BWACA/
See
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my ali using XDA Labs
---------- Post added at 02:28 AM ---------- Previous post was at 02:25 AM ----------
Not sure what custom ROMs are available for your device.
Look for ROMs for Jeter not Ajeter
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Thank you! I got everything back via ADB commands to stock. Any recommendation on how to get LOS going?
Just got LOS 16 with no gapps going via TWRP recovery, perfect. Thanks for the help!
Hello everyone , as the title above indicates ,
everything started when i got this device a week ago , everything was working fine except the sim card , i noticed that there is no signal , so the first thing i did was checking the IMEI number and that was it , there is no imei and baseband is not found and the first thing got to my mind was maybe this is a demo unite or a normal phone with a lost imei, so i tried to reflash the software to see if the imei will be fixed , and i downloaded a firmware for the xt1922-4 and the installation was completed successfuly , and when i tried to boot the phone it was just stuck in a boot screen for about 10s and it swithes off , and whatever firmwares i download i end up with the same result ,
can some one please help me unbrick this phone i dont know what causes this problem
PS : before i flashed the firmware i went to settings to see if i can turn on OEM unlock but it was grey like it was desactivated , the bootloader is now locked
version-bootloader[0]: MBM-2.1-aljeter_retail-b1f322d35c1-2
version-bootloader[1]: 00404
product: jeter
board: jeter
secure: yes
hwrev: P4
radio: 1
storage-type: emmc
emmc: 32GB SKHYNIX HBG4a2 RV=08 PV=A5 FV=00000000000000A5
ram: 3GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=5F
cpu: MSM8937
serialno: ZL4225PGBW
cid: 0x0032
channelid: 0x10
uid: 4CC9D37300000000000000000000
securestate: oem_locked
iswarrantyvoid: no
max-download-size: 535822336
reason: Volume down key pressed
imei: 359544094886813
meid:
date: 11-09-2018
sku: XT1922-4
carrier_sku: XT1922-4
battid:
iccid:
cust_md5:
max-sparse-size: 268435456
current-time: "Fri Sep 27 20:15:51 UTC 2019"
ro.build.fingerprint[0]: motorola/aljeter/aljeter:9/PPPS29.
ro.build.fingerprint[1]: 55-35-12-5/90fd4e:user/release-key
ro.build.fingerprint[2]: s
poweroffalarm: 0
ro.build.version.full[0]: Blur_Version.29.291.5.aljeter.ret
ro.build.version.full[1]: ail.en.US
ro.build.version.qcom: LA.UM.7.6.r1-03700-89xx.0
version-baseband: <not found>
kernel.version[0]: Linux version 3.18.120-perf-g1627ed5 (hu
kernel.version[1]: [email protected]) (gcc version 4.9.x 201
kernel.version[2]: 50123 (prerelease) (GCC) ) #1 SMP PREEMP
kernel.version[3]: T Thu Sep 26 04:43:51 CDT 2019
sbl1.git: MBM-2.1-aljeter_retail-0d2031d6b9-200404
rpm.git: MBM-2.1-aljeter_retail-af31f6ae-200404
tz.git: MBM-2.1-aljeter_retail-f9b266cd30-200404
devcfg.git: MBM-2.1-aljeter_retail-f9b266cd30-200404
keymaster.git: MBM-2.1-aljeter_retail-f9b266cd30-200404
cmnlib.git: MBM-2.1-aljeter_retail-f9b266cd30-200404
cmnlib64.git: MBM-2.1-aljeter_retail-f9b266cd30-200404
prov.git: MBM-2.1-aljeter_retail-f9b266cd30-200404
aboot.git: MBM-2.1-aljeter_retail-b1f322d35c1-200404
frp-state: no protection (0)
ro.carrier: entcl
current-slot:
slot-suffixes: _a
slot-count: 1
slot-successful:_a: INVALID
slot-successful:_b: INVALID
slot-bootable:_a: INVALID
slot-bootable:_b: INVALID
slot-retry-count:_a: unknown
slot-retry-count:_b: unknown