[ROM][OFFICIAL][hotdog][10] RESURRECTION REMIX [MAY] [2021] - OnePlus 7T Pro (Regular & McLaren) ROMs & Dev.

[ROM][OFFICIAL][hotdog][10] RESURRECTION REMIX [MAY] [2021] - OnePlus 7T Pro (Regular & McLaren) ROMs & Dev.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the LineageOS team, Omni team , SlimRoms and of course to all the supporters.
Flash 10.0.12 OOS firmware via fastboot. Link is below in Downloads
Clean flash (RECOMMENDED IF COMMING FROM ANOTHER ROM):
INSTRUCTIONS
• Unpack the payload.bin using Payload Dumper
• Make sure you have the latest fastboot installed
Reboot to Fastboot mode with key combinations or using adb reboot bootloader
Reboot to fastbootd using fastboot reboot fastboot (from active device use : adb reboot fastboot to boot directly to fastbootd)
Follow all the next instructions carefully
vvvvvvvvvvvvvvvvvvv
Code:
[/B][/CENTER][/B][/CENTER][/B][/CENTER]
[B][CENTER][B][CENTER][B][CENTER]• fastboot reboot fastboot
• fastboot devices
• fastboot -w[B][COLOR="darkred"] (THIS WIPES INTERNAL STORAGE SO BACKUP YOUR DATA)[/COLOR][/B]
• fastboot erase system
• fastboot erase boot
• fastboot erase odm
• fastboot erase product
• fastboot erase vbmeta
• fastboot erase vbmeta_system
• fastboot erase vendor
• fastboot erase dtbo
• fastboot flash system system.img
• fastboot flash boot boot.img
• fastboot flash odm odm.img
• fastboot flash product product.img
• fastboot flash vbmeta vbmeta.img
• fastboot flash vbmeta_system vbmeta_system.img
• fastboot flash vendor vendor.img
• fastboot flash dtbo dtbo.img
• fastboot reboot

-UPDATE INSTRUCTIONS-
- Download the latest build of Resurrection Remix ROM
• Unpack the payload.bin
No Need for fastboot -w as this wipes data and internal storage
Follow carefully
vvvvvvvvvvvvvvvvvvv
Code:
[/B][/CENTER][/B][/CENTER][/B][/CENTER]
[B][CENTER][B][CENTER][B][CENTER]• fastboot erase system
• fastboot erase boot
• fastboot erase odm
• fastboot erase product
• fastboot erase vbmeta
• fastboot erase vbmeta_system
• fastboot erase vendor
• fastboot erase dtbo
• fastboot flash system system.img
• fastboot flash boot boot.img
• fastboot flash odm odm.img
• fastboot flash product product.img
• fastboot flash vbmeta vbmeta.img
• fastboot flash vbmeta_system vbmeta_system.img
• fastboot flash vendor vendor.img
• fastboot flash dtbo dtbo.img
• fastboot reboot


ROM Download links and change-logs are below
ROM
FIRMWARE : 10.0.13
GAPPS Already included
Sources :
ROM
Device Source Code
Kernel
Major thanks to
-> RR Team <-
XDA Developers
Phhusson for Treble trees
LineageOs Team
Omni Team
DU Team
AICP
Crdroid
Special Thanks to : MR ACAR (former RR team member)
And Of Course To All The Supporters, Donators And Users
-> Reporting bugs <-
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
After downloading the Catlog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
Join our Telegram channel : https://t.me/resurrectionremixofficial
Check FAQ on POST #2
Show your support to Resurrection Remix ROM

XDA:DevDB Information
Resurrection Remix, ROM for the OnePlus 7T Pro
Contributors
varund7726
Source Code: https://github.com/ResurrectionRemix/
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest OOS 10.0.13
Based On: LOS
Version Information
Status: Stable
Created 2020-04-12
Last Updated 2021-05-17

FAQS {READ BEFORE POSTING}
Q1 Why can't I reboot to fastbootd?
Because you don't have the latest fastboot tools from google. Get them HERE
Q2 Fastboot -w is not recognized as a command
You are not on fastbootd . You are on regular fastboot(bootloader)
Reboot to fastbootd with fastboot reboot fastboot( from bootloader) or adb reboot fastboot (from system).
Fastbootd looks like OOS recovery and not like regular fastboot
Q3 I can't pass safetynet/I can't get cts profile to be valid.Now?
Flash Magisk and enable Magisk Hide
Learn how HEREhttps://forum.xda-developers.com/7t-pro/how-to/10-0-3-patched-boot-image-oneplus-7t-pro-t3986351
Q4 OTA updater doesn't work? FIXED
On purpose. Because we don't have a twrp.
Q5 My Device is stuck in Booloop / Stuck on 1+ logo
Either you have not done a clean flash if coming from another rom (fastboot -w) or you have missed something in flashing.
Make sure you follow all the steps. and make sure you have the latest fastboot tools from the link above to access fastbootd
Q6 Fingerprint scanner causes screen glitch
Known issue in all roms NOT ANYMORE. FIXED!!
Q7 Google pay won't work. Says my device is rooted. What do I do?
Flash Magisk then follow these instructions
Q8 WIll This work for Mclaren Edition of the phone?
Yes. Im personally using a HD 1913 McLaren edition. Altough I have heard reports of the t-mobile one (HD1915) having issues with RIL.
Other variants should be fine.
HD1915 I'm not sure about the 5G being retained .if it works on LOS 17.1 it works here too. Same rules apply
Q9 Why isn't X feature there? Its there in xyz rom
I have recently worked on this due to the quarantine situations that gave me time to work on it. I have worked alone and currently I am working on my own because everyone is busy with their own lives right now. If you have a feature request, I will not guarantee adding it because I may get busy.
I built this ROM for personal use but since evryone is sitting at home now I thought to publish it.
Q10 Why didn't we develop RR Q this year?
Same reason. Everybody busy with real life.
Q11 Will we be back in the next Android version?
Sure.
Q12 Will this Rom get updates?
Yes. Regular upto some point
Q13 Does this ROM come with OOS CAM?
Yes although video recording is broken. Everything else works fine . Use Snap (stock) cam for this.
FIXED!
Q14 Can I build this rom from source?
Currently no as only I have access to that. I want to keep it this way for Android 10 to avoid all the hastle.
Q15 Any other supported devices?
None as of now and I dont plan to. This rom is only for the Oneplus 7T Pro, OnePlus 7 pro and OnePlus 6T fajita as the others have a lot of roms anyways. Although I might just make this build for Oneplus6 (enchilada)

Special Notice
Code:
Hi guys, I hope you guys are home and safe. These are crazy times and everybody is at home. This ROM is a little gift for those who are bored and want to have a little fun. Enjoy, be safe & take care

Screenshots

Can I use this one the OnePlus 7t pro 5g McLaren from tmobile and still get 5g if so how would I will I be able to flash this and is there a different steep I need to take to have it work

NickMidd91 said:
Can I use this one the OnePlus 7t pro 5g McLaren from tmobile and still get 5g if so how would I will I be able to flash this and is there a different steep I need to take to have it work
Click to expand...
Click to collapse
Please read FAQ
Like I said , if it works on LineageOS it will work with this rom as the kernel is the same

varund7726 said:
Please read FAQ
Like I said , if it works on LineageOS it will work with this rom as the kernel is the same
Click to expand...
Click to collapse
Ok thanks but I have not tried it on that rom

Holy **** that's awesome.
Any luck on future fixing oos camera recording?

kubek1334 said:
Holy **** that's awesome.
Any luck on future fixing oos camera recording?
Click to expand...
Click to collapse
Try this, go in OOS Camera, Enable Wide angle lens, then go to video.
Worked for me in other AOSP roms that had problems with video mode

New build is up
Main changes
--
Code:
--- added scrolling screenshot
-- added 2 new accents in themes ( lime and rich red).
-- fix screen recorder audio
-- added faceunlock (settings-> security -> face unlock)
--added AOD tile
-- Minor fixes

didn't expect this coming! good old RR mate tell us if gcam works with photo and video and if autobrightness works as it should? Lineage has this issue and this rom is based on Lineage, so is this working properly? thanks man for your hard work, I see you push builds today with fixes, I hope RR will shine on our beloved device

autobrightness is working fine,
could you add ambient display settings? (i dont see such option on settings)

When selecting a notificantion from the lockscreen doesnt let me use the fingerprint to unlock the device, only the pattern

Just booted for me, everything seems to work except of fingerprint sensor
thank's for your work

Fingerprint is working except fact that it causes screen to flash (usually issue on custom roms)
However autobrightness is too Darka.
Anyway awesome rom

cant get magisk to work
hey guys cant get magisk to work put boot img in internal storage and when to install it does nothing and cant twrp as it doesnt work atm oneplus 7t pro sorry noob david

There is no twrp. Read manual once more time

heardd11 said:
hey guys cant get magisk to work put boot img in internal storage and when to install it does nothing and cant twrp as it doesnt work atm oneplus 7t pro sorry noob david
Click to expand...
Click to collapse
you must patched first the boot img in magisk.
then boot the patched img in fastboot and if its boot go to magisk and do direct install. and reboot.
Verstuurd vanaf mijn OnePlus 7T Pro met Tapatalk

beaverhead said:
you must patched first the boot img in magisk.
then boot the patched img in fastboot and if its boot go to magisk and do direct install. and reboot.
Verstuurd vanaf mijn OnePlus 7T Pro met Tapatalk
Click to expand...
Click to collapse
you must patched first the boot img in magisk did this and it doesnt do anything were im stuck its weird done it on oxygen os david

Can we flash on regular 7p not t

Related

[DISCONTINUED][ROM][UNOFFICIAL][RIVER]Lineage OS 16.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications,
*/
About:
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Introduction:
This is the unofficial Lineage OS thread for the Motorola G7, codename river.
We support all the T-Mobile, International, and Project Fi variants, as their bootloaders are unlockable, while we can't support the Verizon and AT&T variants, as their bootloaders are permanently locked.
ROM:
lineage-16.0-20191001-UNOFFICIAL-river.zip
Stock Firmware:
Official Firmware
Recovery:
Unofficial TWRP
Copy Partitions: (To setup slot_b)
copypartitions.zip
(courtesy of @filipepferraz)
Open GApps:
http://opengapps.org
Preparation for A/B Roms:
01. Download TWRP and the Firmware for your variant from the links above.
02. Remove your google account under Settings > Accounts then factory reset your device as FRP is enforced.
03. Unlock your bootloader Instructions here.
04. Flash your factory firmware image on slot_A
Hold power + Volume down untill you reach bootloader (fastboot mode)
In your extracted firmware folder open a terminal and flash your firmware files with these commands.
NOTE-1: This last step installs vendor.img to slot_b as well.
05. Use terminal to boot latest twrp.img "fastboot boot twrp.img"
06. ## Take a backup of EFS, Persist1, Persist2 then store this on your computer in a safe place!! ##
07. While on Slot_A Flash copypartitions.zip (This step only needs to be completed Once only after updating from stock factory firmwares.)
08. While in TWRP choose Reboot > bootloader
09. Now you're ready for ROM Steps below
ROM - Installation:
01. Download the ROM, TWRP and GApps from the links above.
02. Use terminal to boot latest twrp.img "fastboot boot twrp.img"
03. Flash ROM.zip + TWRP_Installer.zip
04. Reboot > Recovery
05. Install Gapps + Magisk (if you choose)
06. Reboot > System

Updating (AKA 'dirty flash'):
01. Download the updated ROM
02. fasboot boot twrp.img
03. Install ROM.zip + TWRP_Installer
04. Reboot > Recovery
05. flash gapps + Magisk (if you choose)
06. Reboot > System

Notes:
Any time your internal storage aka "Userdata" is from a stock install you must use 'fastboot -w' to erase it before using ROMS
XDA:DevDB Information
Lineage OS 16.0, ROM for the Moto G7, ROM for the Moto G7
Contributors
SyberHexen, erfanoabdi, LineageOS Team
Source Code:
[url]https://github.com/LineageOS[/URL]
android_kernel_motorola_msm8953
android_device_motorola_river_prebuiltvendor
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Stock Vendor.img
Version Information
Status: Testing
Created 2019-08-19
Last Updated 2019-10-01

BUGS
====
1. Mobile Data can be intermittent (potentially carrier specific)
2. LiveDisplay: Default mode causes screen inversion
- Please Switch under Settings > Display > LiveDisplay > Color Profile > To Hal_Native/Standard

Release Notes:
(09/17/2019)
Device:-
* Adoptable Storage Support
* Added support HBM support for all known panels
(fixes non boot with certain screen suppliers)
Kernel:-
* Upstream Kernel [4.9.112] --> [4.9.165]
(09/08/2019)
* Included Patch for Magisk Support
* Different IMS/Telephony Implementation
(which should allow calls on VoLTE)
* LiveDisplay Adjustments

Can you share .repo/local_manifests/roomservice.xml that you use to build the rom?
I'd like to build too.
Thanks.
Great work.

Irrelevant reply, mostly due to error in OP thread;
In the first paragraph of the About it says this LineageOS is for Android Oreo (8.0) while at the bottom it is claimed for Android Pie (9.0)
Will be installing soon for better feedback, but just thought you'd like to be aware of that.
Also, would this include the Security Patch of the most recent official release or is that something not to concern myself over with LineageOS releases?

zenful said:
Irrelevant reply, mostly due to error in OP thread;
In the first paragraph of the About it says this LineageOS is for Android Oreo (8.0) while at the bottom it is claimed for Android Pie (9.0)
Will be installing soon for better feedback, but just thought you'd like to be aware of that.
Also, would this include the Security Patch of the most recent official release or is that something not to concern myself over with LineageOS releases?
Click to expand...
Click to collapse
Gotta love xda thanks for letting me know that xda reverted all my corrections to the main post over night.
So it's android 9.0 built with latest sources

Does this work for the Amazon variant of the Moto g7?

Hi, I apologize if this isn't the best place to post this, but I get an error when following installation instructions. While flashing stock firmware to slot A, I run the command `fastboot flash partition gpt.bin` and get the following output:
Code:
fastboot: core/libsparse/sparse.cpp:131: int write_all_blocks(struct sparse_file *, struct output_file *): Assertion `pad >= 0' failed.
zsh: abort (core dumped) fastboot flash partition gpt.bin
I tried googling for the error, but wasn't able to come up with a clear idea of what to do to fix it. If anyone can point me in the right direction, I'd really appreciate the help. Thanks a lot.

jleprincehoff said:
Does this work for the Amazon variant of the Moto g7?
Click to expand...
Click to collapse
Last i knew Amazon Devices couldnt not be Boot Loader Unlocked

Yes they can be unlocked my g7 power Amazon is unlocked

A lightning said:
Hi, I apologize if this isn't the best place to post this, but I get an error when following installation instructions. While flashing stock firmware to slot A, I run the command `fastboot flash partition gpt.bin` and get the following output:
I tried googling for the error, but wasn't able to come up with a clear idea of what to do to fix it. If anyone can point me in the right direction, I'd really appreciate the help. Thanks a lot.
Click to expand...
Click to collapse
Try updating adb drivers or using different version

Cam Work!!! I can Capture Images and Record Video
Google Gapps - OpenGapps ARM64 Work Fine!!!
Magisk Not Work But the addonsu arm64 for lineage os 16 work!!! :good:

SyberHexen said:
Try updating adb drivers or using different version
Click to expand...
Click to collapse
I'm using the latest Android platform tools on Linux. I should have included this in my first message, but this is a Project Fi phone. I tried both builds in the Fi folder of the lolinet link in the OP, and both had the same problem. The model numbers on these do match my phone. (XT1962-1) I'm really struggling to find an explanation for my error message anywhere online.
Code:
fastboot: core/libsparse/sparse.cpp:131: int write_all_blocks(struct sparse_file *, struct output_file *): Assertion `pad >= 0' failed.
zsh: abort (core dumped) fastboot flash partition gpt.bin

A lightning said:
I'm using the latest Android platform tools on Linux. I should have included this in my first message, but this is a Project Fi phone. I tried both builds in the Fi folder of the lolinet link in the OP, and both had the same problem. The model numbers on these do match my phone. (XT1962-1) I'm really struggling to find an explanation for my error message anywhere online.
Code:
fastboot: core/libsparse/sparse.cpp:131: int write_all_blocks(struct sparse_file *, struct output_file *): Assertion `pad >= 0' failed.
zsh: abort (core dumped) fastboot flash partition gpt.bin
Click to expand...
Click to collapse
Post result of
Code:
fastboot --version
adb --version

ptn107 said:
Post result of
Code:
fastboot --version
adb --version
Click to expand...
Click to collapse
Code:
1% fastboot --version
fastboot version 29.0.2-ArchLinux
Installed as /usr/bin/fastboot
% adb --version
Android Debug Bridge version 1.0.41
Version 29.0.2-ArchLinux
Installed as /usr/bin/adb
In addition to my Linux distro's package, I also tried downloading platform-tools with Android sdkmanager and got the same errors,

I've used lineageos 14 in the past but it's been a while.
What advantages does lineageos 16 bring compared to Moto's pie?

ptn107 said:
I'm using the latest Android platform tools on Linux. I should have included this in my first message, but this is a Project Fi phone. I tried both builds in the Fi folder of the lolinet link in the OP, and both had the same problem. The model numbers on these do match my phone. (XT1962-1) I'm really struggling to find an explanation for my error message anywhere online.
Click to expand...
Click to collapse
I'm on FI with the same model.
Have you tried using older fastboot drivers or a different USB-c /USB port?

I sent the OP a pm asking if they would like any help or if they are willing to link us github information so we can start building and improving this for the River device.
Waiting to hear something back

Hell-Razor said:
I sent the OP a pm asking if they would like any help or if they are willing to link us github information so we can start building and improving this for the River device.
Waiting to hear something back
Click to expand...
Click to collapse
https://github.com/SyberHexen Here is his work.

flintman said:
https://github.com/SyberHexen Here is his work.
Click to expand...
Click to collapse
Thats not a guarantee its all the work he has done. He may still be pulling from multiple gits in a script. I would much rather talk to the op and check before trying to jump through loops that could easily be there.
EDIT: I sound like a **** there, I dont mean to be. I am just not great at this stuff so it may be nice to get a little help.

[ROM][13.0][Daredevil] LineageOS 20.0 [UNOFFICIAL]

Note - please take your data backup and do clean flash as per the instructions linked in the main thread. On top of it, my builds will boot on any stock firmware as base. So there is no special recommendation towards which stock rom you need to be on.
Changelog - Sun Jan 22 19:01:23 UTC 2023
============================
• Initial Android 13 build
• Based on android-13.0.0_r20
• Improved system stability
• User interface enhancements
• Google security patch 2023-01
• Selinux enforced
• Vendor built from Source
• Imported CTS profile patches
• Safety net pass by default & no need zygisk
• Updated build fingerprint from Pixel 7 Pro (cheetah)
Reminder - for reporting bugs please mention the issue and attach the logcat.
Thank you!

Awesome..!

Any chance it would run on Nokia 8.1 after unlocking/rooting with Hikari files ?
I'm mean ... someday / when updates are over .

Changelog Sat Apr 3 08:41:31 UTC 2020
===================================
1. Initial stable build
2. March security patch
3. Comes with stock kernel
4. Linux version 4.4.194
5. Vendor image from 2250
6. System blobs from 2250
7. Ota support available
Note- Installation process changed so please go ahead and follow the instructions as I mentioned in installation section

I tested now and I found Google Services - are GApps included? I installed lineageos in this build to AVOID this. Or did I make something wrong?

overclockA said:
I tested now and I found Google Services - are GApps included? I installed lineageos in this build to AVOID this. Or did I make something wrong?
Click to expand...
Click to collapse
Thanks, saved me some time. Defeats the entire purpose for me.

xe500linux said:
Thanks, saved me some time. Defeats the entire purpose for me.
Click to expand...
Click to collapse
I wrote to Raghu varma for the same question.
Technically it seems to not be that simple - if lineage 17.1 has been compiled without gapps and the build process was done by using private keys, flashing gapps would brick the device or the lineageos installation.
So Raghu varma compiled the version with gapps included to avoid this.
So I took his scripts from github and I built lineageos 17.1 on my own (with private keys and without gapps as I don't think about flashing them afterwards) - this worked fine.
Now I couldn't find his scripts for Daredevil on his github profile anymore - maybe they will come back for the 7.2 build process.

overclockA said:
I wrote to Raghu varma for the same question.
Technically it seems to not be that simple - if lineage 17.1 has been compiled without gapps and the build process was done by using private keys, flashing gapps would brick the device or the lineageos installation.
So Raghu varma compiled the version with gapps included to avoid this.
So I took his scripts from github and I built lineageos 17.1 on my own (with private keys and without gapps as I don't think about flashing them afterwards) - this worked fine.
Now I couldn't find his scripts for Daredevil on his github profile anymore - maybe they will come back for the 7.2 build process.
Click to expand...
Click to collapse
Ah I see. Any chance you still have a copy of your non-g build?

xe500linux said:
Ah I see. Any chance you still have a copy of your non-g build?
Click to expand...
Click to collapse
This should be OK. I'll upload a copy and send a link.
Be aware that the security patch level is dated on march 2020 and doesn't include the latest Google security patches from june.

overclockA said:
This should be OK. I'll upload a copy and send a link.
Be aware that the security patch level is dated on march 2020 and doesn't include the latest Google security patches from june.
Click to expand...
Click to collapse
Much appreciated!!

i posted already in the twrp thread of my problem "touch not working with twrp", that's still persisting.
so i got another idea. i used adb commands to control twrp. like you know, adb shell twrp sideload and then do the adb sideload commands for installing lineageos 17.1.
what did i do so far is:
*flash twrp 3.4.0
*boot up to twrp 3.4.0
*use adb shell twrp remountrw
*use adb to sideload lineageos 17.1 zipfile with commands (adb shell twrp sideload and then adb sideload lineageos.zip) - but the progress bar only goes to 47% and say like it would have "finished" - i dont believe in it
*use adb to sideload vendor zipfile zipfile with commands (adb shell twrp sideload and then adb sideload vendor.zip) - that one works normally
*changed slot from B (i was on before) to A on fastboot and flashed the vbmeta to current slot (A)
*reboot without wiping system partition and installing lineageos only brings up normal stock rom
*even wiped system partition one time (or should i say system_root?) - and installed lineageOS via adb sideload. but nothing was in the system_root folder as i mounted it back again
*wiping system partition and reboot only brings up android one loading screen endlessly
so basically, the installer says it has installed the rom, but in reality it didnt seem to touch the system partition at all. am i doing something wrong or may it be that because i dont have touch access i miss to move some unlock slider which is not implemented via adb shell twrp? i think something along these lines might be the case but.. i was able to adb shell twrp wipe system. so basically it should not be a big deal to write to system partition or system_root in general.
oh and of accusation that the adb sideload probably doesnt send data correctly (from which i heard lots of stories of the past), i even pushed the zip file via adb push to / and installed it with adb shell twrp install /lineageos.zip. same result.
what i would really like to see is an debug log of the installer zip. you only see "part 1 and part 2" installing and percentage, but no informations what the installer is doing currently. this would help a lot if there would be a switch for the installer like "verbose information"
edit again.
I finally managed to do the install. You know what? it is possible without the touch gui. what i did was:
*reflashed via fastboot the stock rom
*booted normally, installed the latest upgrade (Stock ROM OTA - took a long while) - (may be obsolete)
*booted to fastboot, flashed newest twrp to boot
*booted to recovery
*adb shell twrp remountrw
*adb shell twrp remountrw (the /tmp/recovery.log showed interestingly at first remountrw the page set of readonly, at second time not - why?)
*adb shell
*entered in adb shell mount /system
*adb shell twrp wipe data
*adb push lineageos.zip /data/
*adb shell twrp install /data/lineageos.zip
*adb push ddv.zip /data/
*adb shell twrp install /data/ddv.zip
*adb shell getprop ro.boot.slot_suffix (to get the actual boot slot)
*adb reboot bootloader
*fastboot --set-active=_a (for me i was on b before, so i needed to go to a)
*fastboot flash vbmeta_a --disable-verity --disable-verification vbmeta.img
*fastboot reboot
*then the phone - now on lineage - asked me to factory reset, i did
*booted finally successfully up to lineage 17.1 - wlan, mobile network working just fine
if you want gapps on it, install them ideally direct after your custom rom is able to boot. in my case gps didnt worked with gapps and other apps till i did another factory reset. and the original launcher that comes with the cust-rom doesnt work anymore after installing the gapps. use the pixel launcher instead. after that, it works like a charme
in conclusion: a bit odd how the install not works as in the description was told. maybe the TA-1196 is just a bit different.

Hello Together,
i've installed LineageOs yesterday and i realy like it . I just can't find an camera App that supports the wideAngle Camera at the back.
Open Camera only recognizes 2 Cameras, and GCam 7.0 Nokia 7.2 Mod can't seem to access it either.
Is there a solution to this?
Best regards
Alex

Changelog Fri Nov 13 23:24:47 IST 2020
==============================
- based on latest lineage sources
- November 2020 security patch
- fixed bluetooth audio
- fixed mic
- fixed RIL
- fixed headset
- based on android 10 prebuilt vendor for now ( DDV2.340 )
- Comes with stock kernel
- linux version 4.4.192
- compiled using gcc
- fixed battery drain
- fixed styles and wallpapers
- selinux enforced
- banking apps working
- use NikGapps

Got brand new nokia 7.2 yesterday, developer loaded old android build 1_130 and unlocked bootloader, didnt recommend twrp as this wol break wi-fi. Can I flash this OS on my phone directly without twrp ? will wifi and camera work as it should? Sorry for the questions I am new here and just started reading this Thank you

Nokia is nowadays very slow in giving security patch updates to its devices. Its a high time we switch to custom rom..?
I'm waiting for my phone's warranty to get over. Anyways, do anyone have any eta on when this rom will get official?

I have managed finally to install it, but sorry, nothing mentioned work: no double tapp sleep or wake up, no fingerprint, no slinux enforced, camera is not worth to mention at all and i still didnt test bluetooth or microphones yet. ..

dariuslapsys said:
I have managed finally to install it, but sorry, nothing mentioned work: no double tapp sleep or wake up, no fingerprint, no slinux enforced, camera is not worth to mention at all and i still didnt test bluetooth or microphones yet. ..
Click to expand...
Click to collapse
I agree for tapp to wake up and selinux.
Nevertheless, bluetooth and microphones and fingerprint sensors are working like a charm.
NFC is not mentioned anywhere, but I don't need this function at all.
I installed the build from 14/11.
@Raghu varma: Can we help you out sending logfiles for some issues? Do you need testers?

Raghu varma said:
Note - Iam Not Responsible for bricked devices
About LineageOS
LineageOS is a free and open-source operating system for set-top boxes, smartphones and tablet computers, based on the Android mobile platform. It is the successor to the custom ROM CyanogenMod, from which it was forked in December 2016 when Cyanogen Inc. announced it was discontinuing development and shut down the infrastructure behind the project. Since Cyanogen Inc. retained the rights to the Cyanogen name, the project rebranded its fork as LineageOS.
LineageOS was officially launched on December 24, 2016, with the source code available on GitHub. Since that time, LineageOS development builds now cover more than 185 phone models with over 1.9 million active installs,having doubled its user base in the month February–March 2017 And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Installation procedure
Note - I don't recommend you people to flash any other custom kernels on this ROM untill Nokia release kernel sources. Because this ROM supports only stock kernel .
1. Download Rom.zip , twrp.img & vbmeta.img
2. power off your phone boot in to bootloader mode and flash twrp
3. Boot in to Twrp
4. Format data by typing yes
5. Wipe everything
6. Flash rom.zip & vendor.zip
7. Now tap on reboot and check your current active slot.
Example - if twrp shows current active slot A change to B if B change to A
8. Tap on reboot and tap on bootloader ( this will reboots your phone to bootloder mode )
9. Now open cmd in pc flash vbmeta using this command
for slot-a > fastboot flash vbmeta_a --disable-verity --disable-verification vbmeta.img
for slot-b> fastboot flash vbmeta_b --disable-verity --disable-verification vbmeta.img
( thanks to @singhnsk for this step )
10. now type fastboot reboot
and wait for 3 min rom will boot up
Credits
* LineageOS & CO (For Source Code)
* All the authors in my git sources
* Nokia For Prebuilt Vendor & Kernel Source
* Moderators (For Giving Freedom To Post Threads)
* My entire Nokia 7.2 community Thank you all for your massive support Again
Join Nokia 7.2 Community

Download Rom
Download Vendor
Download vbmeta
Download GApps
Download Official Twrp
Android OS version: 11.0.0_r17
Security patch level: November 2020
Build author: Raghu varma
My build script: https://github.com/RaghuVarma331/scripts
Kernel Source code: https://github.com/RaghuVarma331/android_kernel_nokia_sdm660
Source code: https://github.com/LineageOS
Click to expand...
Click to collapse
When i install this rom volte function not proper working outgoing not work incoming volte works reply what is this

When i install this rom volte function not proper working outgoing not work incoming volte works reply what is this

[ROM][UNOFFICIAL][10] Lineage 17.1 for Motorola One [DISCONTINUED]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's working :
Boots
RIL Afaik
Audio
Wi-Fi
Camera/Video Recording
Video Playback
Etc
What's not working:
You Tell Me, I don't own this device, development was done with testers. If you will post about a bug please provide a logcat or it will be disregarded.
How to install?
Download The ROM
Put the ROM File In Internal Storage Or SD Card.
Wipe: System, Data, Dalvik Cache & Cache
Flash ROM
Reboot into recovery
Flash Gapps (optional)
Reboot & Enjoy
ROM Download:
Discontinued
GAPPS Downloads:
OpenGapps: https://opengapps.org/
Join The Motorola One Telegram Channel Now for more Updates..!
Link: https://t.me/MotoOne_deen
If you wanna buy me lunch: https://paypal.me/electimon
Contributors
@Electimon Maker of ROM and tree
@erfanoabdi Maker of sdm632-common tree from which I based off of
Serban, master tester I don't own this phone
ROM OS Version: Android 10
ROM Kernel: Linux 3.18.*
ROM Firmware Required: Latest Firmware
Version Information
Status: Stable
Created 2020-07-10
Last Updated 2020-07-11
2020-07-10: initial build
2020-07-11: Fixed random reboots

Which command do i use to install it? Ir it's vía twrp?

2020-07-11: Fixed random reboots due to WiFi
Please check the download link and update. Thank you

Instructions to get the LOS:
1. Fastboot erase userdata
2. fastboot getvar all (check boot slot, remember him)
3. fastboot boot twrp.img (idk, what name have your twrp)
4. wipe data, system, dalvik
5. adb push rom
6. flash rom
7. reboot to fastboot (bootloader)
8. fastboot getvar all (check boot slot, if the same as before change him)
9. fastboot set_active b if your slot is a (if not you didn't make anything)
10. fastboot erase userdata
11. boot system
12. after boot go to TWRP
13. flash gapps
14. boot system second time
15. greetings, your deen have LOS

led notifications and swipe fingerprint to see notifications not trigger on my deen xt1941-5
Enviado desde mi Motorola One mediante Tapatalk

G0uk1 said:
Instructions to get the LOS:
1. Fastboot erase userdata
2. fastboot getvar all (check boot slot, remember him)
3. fastboot boot twrp.img (idk, what name have your twrp)
4. wipe data, system, dalvik
5. adb push rom
6. flash rom
7. reboot to fastboot (bootloader)
8. fastboot getvar all (check boot slot, if the same as before change him)
9. fastboot set_active b if your slot is a (if not you didn't make anything)
10. fastboot erase userdata
11. boot system
12. after boot go to TWRP
13. flash gapps
14. boot system second time
15. greetings, your deen have LOS
Click to expand...
Click to collapse
could you install magisk? i can't pass through the welcome screen.
it pops up everytime the Interf System keeps stoping. sometime it goes to the Updating screen the big circle spinning.
but then, the app crashes again

dsync44 said:
could you install magisk? i can't pass through the welcome screen.
it pops up everytime the Interf System keeps stoping. sometime it goes to the Updating screen the big circle spinning.
but then, the app crashes again
Click to expand...
Click to collapse
Do you do the fastboot erase userdata after flash Lineage?
Now I'm at PEPlus and this is so much better than stock.
And your question:
Yes, you can install Magisk after 1st boot.
Also you can pass SafetyNet.
please pm me to more details

need help pls
Sorry for my bad english.
I want to flash the lineage os
I have unlocked my bootloader
now i need to flash a custom recovery?
i have tryed to find the right twrp for my motorola one xt1941-4
can i have a link with a working recovery.img and a easy manual if possible?
I have read about a patched boot.img instead of the recovery.img
very thanks for any help i can get

yago89 said:
Sorry for my bad english.
now i need to flash a custom recovery?
i have tryed to find the right twrp for my motorola one xt1941-4
Click to expand...
Click to collapse
You can not flash recovery, instead you have to boot it remotely.
Download twrp-deen.5.img to your PC (I think 5 is the latest version):
https://androidfilehost.com/?fid=11410963190603890360
connect phone to USB, open platform tools, boot phone to fastboot mode
and boot into recovery:
fastboot boot "C:\your_path_to\twrp_deen-5.img"

Do i have to wipe USB-OTG in first step too?

Thank you!
El Esposito said:
You can not flash recovery, instead you have to boot it remotely.
Download twrp-deen.5.img to your PC (I think 5 is the latest version):
connect phone to USB, open platform tools, boot phone to fastboot mode
and boot into recovery:
fastboot boot "C:\your_path_to\twrp_deen-5.img"
Click to expand...
Click to collapse
This twrp booted for me with no problems.
Remember
-installed latest drivers
-added fastboot dir to path
-ensured devtools and usb debugging enabled on phone
-run fastboot's terminal/command prompt window as elevated admin user
this rom with ZERO gapps == Bliss. Thank you Electimon and crew!

this ROM is perfect, why would someone try something else? its hard to think on any advantage over it.

Hi there!
Newbie here, so forgive me not having read all the manuals and the whole web so I will forgive you not having all the answers to my questions
Is there a more recent version of LineageOS for the Motorola One XT1941-4 (deen) than this one above? Where do I get it?
Where would I go first to learn how to develop a custom build and/or try to adapt the most recent Lineage to my device?
Regarding to the Custom Build in the initial post above, the steps to install it with success are not very specific for this device. I will make a better step by step instruction shortly. The Moto One is *****y about the bootloader and doesn't accept oem commands or so it seems.
I search for a Motorola device that gets official Lineage and official RevengeOS support. Any advice is appreciated.
What does this blankflash utility exactly do and who is it from? What does it do different than fastboot commands?

Lineage OS 18.1 what Is?

Hi, I want to buy a Motorola One, but in one shop it has android 8 and another one says it has android 8.1.
Here I found the official LineageOS version: https://www.getdroidtips.com/lineage-os-17-1-motorola-one/,
but it says it is based on Android10Q. Would this be a problem?

Link is broken

Link to LineageOS builds: http://2pwn.tk/android/deen/LineageQ/

Electimon said:
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's working :
Boots
RIL Afaik
Audio
Wi-Fi
Camera/Video Recording
Video Playback
Etc
What's not working:
You Tell Me, I don't own this device, development was done with testers. If you will post about a bug please provide a logcat or it will be disregarded.
How to install?
Download The ROM
Put the ROM File In Internal Storage Or SD Card.
Limpe: Sistema, Dados, Dalvik Cache e Cache
ROM Flash
Reiniciar para recuperação
Flash Gapps (opcional)
Reinicie e aproveite
Download da ROM:
https://1pwn.tk/android/deen/LineageQ/lineage-17.1-20200710-UNOFFICIAL-deen-2.zip
Downloads GAPPS:
OpenGapps : https://opengapps.org/
Junte-se ao canal Motorola One Telegram agora para mais atualizações ..!
Link: https://t.me/MotoOne_deen
Se você quer me pagar um almoço: https://paypal.me/electimon
Contribuidores
[MENTION = 7198594] Electimon [/ MENTION] Criador de ROM e árvore
[MENÇÃO = 6298645] erfanoabdi [/ MENÇÃO] Criador da árvore sdm632-common da qual eu baseei
Serban, testador mestre Não tenho este telefone
Versão do ROM OS: Android 10
Kernel da ROM: Linux 3.18. *
Firmware ROM necessário: Firmware mais recente
Versão informação
Status: Estável
Created 2020-07-10
Last Updated 2020-07-11
2020-07-10: initial build
2020-07-11: Fixed random reboots
Click to expand...
Click to collapse
Funciona com Motorola one macro?

Hi,
Thanks for this port. I'd like to try to rebuild and hopefully update it, but can't find the sources. Could you please point me to the source tree?
Thanks by advance

KjoHansiGlaz said:
Could you please point me to the source tree?
Click to expand...
Click to collapse
I found :
https://github.com/electimon/device_motorola_deen
https://github.com/electimon/vendor_motorola_deen
https://github.com/electimon/kernel-msm
But it seems I still miss parts. Would someone please share their repo local_manifest ?

[CLOSED][ROM][UNOFFICIAL][Q] LineageOS 17.1 for Redmi Note 9 Pro [joyeuse]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Bugs
- NFC
Note: SELinux is enforcing
Installation instructions
- Flash my recovery (see below)
- Go to fastbootd
- Execute the following commands with a PC:
Code:
fastboot erase system
Code:
fastboot erase vendor
Code:
fastboot erase product
- Format data and cache
- Flash the ROM
- (Optional) Flash gapps and/or Magisk
- Reboot
Download
Note: ROM abandoned in favor of miatoll (unified ROMs for curtana, joyeuse and excalibur) builds, please flash other ROMs
- ROM
- Recovery
- GApps aren't included, OpenGapps pico or nano recommended
Sources
- Xiaomi SM6250 common device tree
- Redmi Note 9 Pro device tree
- Xiaomi SM6250 kernel sources
- Xiaomi vendor blobs
Thanks to:
- Erfan Abdi for common device tree
- All the testers that helped me
XDA:DevDB Information
[ROM][UNOFFICIAL][Q] LineageOS 17.1 for Redmi Note 9 Pro [joyeuse], ROM for the Redmi Note 9 Pro
Contributors
SebaUbuntu
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2020-08-08
Last Updated 2020-08-10

Reserved

Thanks for the ROM!

Thanks for this ROM. Finally someone decided to work on Joyeuse LineageOS.
Is it possible to use signature spoofing on this ROM? (MicroG)

Wow. Thanks.

Great work ! Thanks ! It runs perfectly and I enjoy it

Did you sign the build with your own keys or with the public LineageOS keys the come by default?
As in, does LineageOS Trust complain about the keys used for signing?

Can't erase any of the partitions. What to do?
Code:
[Unixsystem ~]$ fastboot erase system
Erasing 'system' FAILED (remote: 'Check device console.')
fastboot: error: Command failed

heyadmwutanime said:
Can't erase any of the partitions. What to do?
Click to expand...
Click to collapse
You must do first : "fastboot reboot fastboot" to inter on fastbootd

DICKO1984 said:
You must do first : "fastboot reboot fastboot" to inter on fastbootd
Click to expand...
Click to collapse
Thank you very much! It worked.
I installed MIUI V11.0.5 before. At flashing LineageOS (ADB sideload inside LOS recovery) it said "patching firmware images". Did it overwrite the firmware then?
How should I root this LineageOS ROM? Same way as https://forum.xda-developers.com/re.../how-to-unlock-root-redmi-9-9s-9-pro-t4108913 and extract boot.img from V11.0.5 vendor image?

This doesnt work on Curtana, does it?

@SebaUbuntu : thank you so much!!! Great work!
@heyadmwutanime : take the boot image from the lineageOS zip and then use the Magisk manager app to create a patched version. goto fastboot and flash patched boot image.
Playing with cams: anx(cannot get portrait to work) gcam versions(different lenses do not work well) Gonna try all over again tomorrow.

kheno said:
[MENTION=9769628]
Playing with cams: anx(cannot get portrait to work) gcam versions(different lenses do not work well) Gonna try all over again tomorrow.
Click to expand...
Click to collapse
Did you install OpenGapps or MicroG to use GCam? I tried sideloading nanodroid zip (including MicroG and patch spoofing) but no recovery (LineageOS recovery or PBRP) is able to do it. Why the heck isn't there a good TWRP recovery yet? :crying:
edit: Sideloading in PBRP isn't possible. Only possible to install zip from internal storage or MicroSD. Bad thing LineageOS boot animation is running forever. :crying: Then how would you even flash OpenGapps?

installed opengapps with the recovery provided. Its the lineage recovery and works.
You can only sideload with this recovery. Make sure you have the latest adb tools.
I had problems with sideloading before, and found out that the adb exec was not the latest version (although the "install" tool was the latest version)
Anx camera is being installed as Magisk module. Or gcam versions were installed as apk and an xml file.
About pbrp, I saw there is a 3.0.0 version available on telegram : joyeuse discussion group.
I have not tried this on yet, still
I also note that some errors (cannot mount system/product/ ...) can be resolved to first unmount those partitions in twrp/pbrp before flashing the file.
If boot anim is running forever, goto recovery and erase cache/data, then reboot.

kheno said:
Playing with cams: anx(cannot get portrait to work) gcam versions(different lenses do not work well) Gonna try all over again tomorrow.
Click to expand...
Click to collapse
Did you install the ANXCustlibs addon from the website? That's needed for portrait mode. This one should be the right version:
MOD EDIT: Link Removed
(taken from their website. Don't own this phone yet so can't test it)

M47Z said:
Did you install the ANXCustlibs addon from the website? That's needed for portrait mode. This one should be the right version:
MOD EDIT: Link Removed
(taken from their website. Don't own this phone yet so can't test it)
Click to expand...
Click to collapse
For me working variant is:
ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip
48MPFixQ_181.GlossyIntelligentCock.zip
Ultra pixel works, camera works, but Portrait mode doesn't work.
Additionally infrared doesn't work.

Auto brightness is too high on daylight. Could you please lower it overall and also bring it to 0% when it's completely dark?

julle131 said:
Did you sign the build with your own keys or with the public LineageOS keys the come by default?
As in, does LineageOS Trust complain about the keys used for signing?
Click to expand...
Click to collapse
I don't use custom keys to sign the build
Yes Trust will complain, but you can ignore the warnings

M47Z said:
Did you install the ANXCustlibs addon from the website? That's needed for portrait mode. This one should be the right version:
MOD EDIT: Link Removed
(taken from their website. Don't own this phone yet so can't test it)
Click to expand...
Click to collapse
I used the 48MPFixQ_170.SophisticatedFatBetafish.zip addon and that one contains CustLibs already it seems.
Tried installing the latest customlibs after uninstalling the 48mpxfix, but that made portrait and 64mpx function not working.
Thanks for the suggestion anyways! it was worth a try. :good:

Sadly the download links for the ROM and Recovery are failing...
---------- Post added at 11:38 PM ---------- Previous post was at 11:23 PM ----------
zzzardoz said:
Sadly the download links for the ROM and Recovery are failing...
Click to expand...
Click to collapse
Never mind, links are working now

[ROM][BETA/Unofficial] Resurrection Remix 8.6.5 [Avicii / OnePlus NORD]

* Your warranty is now.. not void?
* I am not responsible if your phone turns out into a high-tampered mutant or a brick to play lego with.
* Do some research if you don't have any experience in flashing ROMs as you will be needing it,apparently.
* You are choosing to flash my build yourself, I have not compelled you to flash it.
* If you ever say I am responsible for anything happening to your phone, I will just sit back and rejoice the new season of Attack on Titans.
Click to expand...
Click to collapse
I've been building and running RR on my Nord for quite some time now and so far I've not had any major issues, even went on vacation running RR with no hiccups, so thought I'd share it here too.
This is unofficial and will stay unofficial. I have no plans of being an official maintainer. If we do get an official maintainer I will be locking this thread. Until then I hope y'all enjoy the plethora of features RR has to offer.
What's working:
-Boots
-RIL (Calls, SMS, Data)
-VoLIT
-Wi-Fi
-Bluetooth
-Camera
-Camcorder
-Video Playback
-Audio
-Sensors
-Flash
-GPS
-Alert Slider
Partially working
- Fingerprint-on-display:
Unlocking the phone works, very few apps requiring fingerprint authentication work too (Bitwarden)
On most apps (GPay, PhonePe, PayTM, Authy) we see the fingerprint prompt but the high brightness "pressed" state animation does not appear. You'll need to use your pattern here OR setup face unlock if you think Google does not collect your face data for their own DLNNs.
I recommend you use the "Cyan (Shadow)" Pressed state icon in RR settings.
I also suggest to use the solid cyan fp icon & full brightness in RR settings so you don't have to rely on the pressed state animation.
Not Working / Untested:
-VoWiFi (Cannot test)
Pre-requisites:
-Latest OOS installed
Installation Instructions
I hope you know what you are doing before flashing this ROM. I didn't and I screwed up multiple times trying to figure out how to flash and ended up using the unbricking guide 96911 times only to find out how dumb I was (am?).
BACKUP BACKUP BACKUP!!
Spoiler: This may not work on the new build
Bash:
# Reboot to bootloader and run the following
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
# Reboot to fastbootd
fastboot reboot fastboot
fastboot erase scratch # Just a failsafe, any errors can be ignored
fastboot flash system system.img
fastboot flash product product.img
fastboot flash vendor vendor.img
fastboot -w # Wipes userdata
fastboot reboot
To update, just skip the fastboot -w step. YMMV
Use crDroid/LineageOS recovery and flash the ROM zip.
The ROM comes with GApps included.
Download Link: https://androidfilehost.com/?fid=17248734326145684745
Credits: @CryllicBuster273 @firebird11 for the bring-up and device trees of avicii
XDAevDB Information
OnePlus Nord: Resurrection Remix Unofficial for the OnePlus Nord
ROM OS Version: Android 10
Kernel: Source
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Beta

Reserved

new custom rom

Awesome to see new ROMs coming, I see that you said you don't plan to be an official maintainer, I'm just wondering why? Is that too much work or something else?

Andrica said:
Awesome to see new ROMs coming, I see that you said you don't plan to be an official maintainer, I'm just wondering why? Is that too much work or something else?
Click to expand...
Click to collapse
It's mainly because I have very limited free time to compile a new build and provide updates. Plus compiling Android now takes a significantly lot more time and compute resources than during Nougat days which can get frustrating. I prefer not to ruin the experience of an Official RR thread.

Does 5G and 5G DSS work with this Custom ROM? Thanks

Привет. Хочу установить твою прошивку. У вас самый последний стабильный выпуск?

Hey. I want to install your firmware. Do you have the most recent stable release?

I installed your firmware. Thank you. I liked it, it is smooth. 90Hz is for sure. I will use it. It would be great if you could solve the problem with google pay! Please, if you make an update, please post it, I'll put it to myself.

pedroxtucasa said:
Does 5G and 5G DSS work with this Custom ROM? Thanks
Click to expand...
Click to collapse
I don't have 5G in my country so I cannot test it
redangel.voivod said:
I installed your firmware. Thank you. I liked it, it is smooth. 90Hz is for sure. I will use it. It would be great if you could solve the problem with google pay! Please, if you make an update, please post it, I'll put it to myself.
Click to expand...
Click to collapse
Whats the issue with google pay? Is it Safetynet related? In that case there is not much that can be done in the ROM, rather you'll have to mess around with magisk , magiskprops etc.
I Do want to publish an update based on the official LineageOS sources however I just don't have the time due to work commitments. I'll see if I can publish an update on some weekends

DroidFreak32 said:
I don't have 5G in my country so I cannot test it
Whats the issue with google pay? Is it Safetynet related? In that case there is not much that can be done in the ROM, rather you'll have to mess around with magisk , magiskprops etc.
I Do want to publish an update based on the official LineageOS sources however I just don't have the time due to work commitments. I'll see if I can publish an update on some weekends
Click to expand...
Click to collapse
there is still a problem. File transfer via NSF from one smartphone to another does not work. It does not connect and crashes into recovery.

Is this rom stable enough for daily use?
Does face unlock work on this rom?

[QUOTE = "mongaidsd, post: 84373711, member: 11397017"]
Достаточно ли стабилен этот ром для повседневного использования?
Работает ли разблокировка по лицу на этом диске?
[/ QUOTE]
Да, стабильно. Я на нем больше недели. Разблокировка по лицу работает хорошо. Палец не работает. А нфс нужно было создать с помощью магии. В остальном мне все нравится. Я остаюсь на нем.

Managed to Flash the Zip directly through Pixel Experience Recovery. Also no problems with Evira Kernel which is a bonus. Just need some updates for the ROM and I'd be completely set.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

DroidFreak32 said:
I've been building and running RR on my Nord for quite some time now and so far I've not had any major issues, even went on vacation running RR with no hiccups, so thought I'd share it here too.
This is unofficial and will stay unofficial. I have no plans of being an official maintainer. If we do get an official maintainer I will be locking this thread. Until then I hope y'all enjoy the plethora of features RR has to offer.
What's working:
-Boots
-RIL (Calls, SMS, Data)
-VoLIT
-Wi-Fi
-Bluetooth
-Camera
-Camcorder
-Video Playback
-Audio
-Sensors
-Flash
-GPS
-Alert Slider
Partially working
- Fingerprint-on-display:
Unlocking the phone works, very few apps requiring fingerprint authentication work too (Bitwarden)
On most apps (GPay, PhonePe, PayTM, Authy) we see the fingerprint prompt but the high brightness "pressed" state animation does not appear. You'll need to use your pattern here OR setup face unlock if you think Google does not collect your face data for their own DLNNs.
I recommend you use the "Cyan (Shadow)" Pressed state icon in RR settings.
Not Working / Untested:
-VoWiFi (Cannot test)
Pre-requisites:
-Latest OOS installed
Installation Instructions
I hope you know what you are doing before flashing this ROM. I didn't and I screwed up multiple times trying to figure out how to flash and ended up using the unbricking guide 96911 times only to find out how dumb I was (am?).
Bash:
BACKUP BACKUP BACKUP!!
# Reboot to bootloader and run the following
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
# Reboot to fastbootd
fastboot reboot fastboot
fastboot erase scratch # Just a failsafe, any errors can be ignored
fastboot flash system system.img
fastboot flash product product.img
fastboot -w # Wipes userdata
fastboot reboot
You can even try to use crDroid/LineageOS recovery and flash the ROM zip. To update, just skip the fastboot -w step. YMMV
The ROM comes with GApps included.
Download Link: https://androidfilehost.com/?fid=17248734326145684745
Credits: @CryllicBuster273 @firebird11 for the bring-up and device trees of avicii
XDAevDB Information
OnePlus Nord: Resurrection Remix Unofficial for the OnePlus Nord
ROM OS Version: Android 10
Kernel: Source
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Beta
Click to expand...
Click to collapse

I have an update released here:
https://github.com/DroidFreak32/OTA/releases/download/rr-q/RROS-Q-8.6.9-20210524-avicii-Unofficial.zip
You need to clean flash this upgrade. There are a lot of changes in the LineageOS Device tree for this phone since the last one I released here.
You can use TWRP to wipe data without wiping internal storage.
There are still a few known bugs.
1) FIngerprint requires the phone to be in full brightness for it to register. Unable to get HBM working. No workarounds found yet
2) In some apps the fingerprint "pressed-state" glow does not appear. As a workaround, go to RR Settings > Interface > Fingerprint Settings and use the FOD icon that looks like a Cyan-colored circle.
3) NFC is broken on source built kernel. Whereas prebuilt OOS kernel breaks dt2w gestures. NFC is less important to me so I haven't used a prebuilt OOS kernel.
mongaidsd said:
Is this rom stable enough for daily use?
Does face unlock work on this rom?
Click to expand...
Click to collapse
I would still take a complete backup before running any ROM and testing for a couple of days
And yes face unlock works
Sjuundla said:
Managed to Flash the Zip directly through Pixel Experience Recovery. Also no problems with Evira Kernel which is a bonus. Just need some updates for the ROM and I'd be completely set.
Click to expand...
Click to collapse
Please clean flash the update and let me know if any major bugs exist.
azarian k said:
hi been a big fan of RR roms , was hoping to try out this one too , just thought if it also came in a "with out Gapps" version Thanks
Click to expand...
Click to collapse
I have uploaded 1 here but I have not tested it yet. Unfortunately, I haven't got the time to test due to work stuff which requires me to have Gapps.
https://github.com/DroidFreak32/OTA/releases/download/rr-q/RROS-Q-8.6.9-20210524-avicii-NOGAPPS.zip

DroidFreak32 said:
I have an update released here:
https://github.com/DroidFreak32/OTA/releases/download/rr-q/RROS-Q-8.6.9-20210524-avicii-Unofficial.zip
You need to clean flash this upgrade. There are a lot of changes in the LineageOS Device tree for this phone since the last one I released here.
You can use TWRP to wipe data without wiping internal storage.
There are still a few known bugs.
1) FIngerprint requires the phone to be in full brightness for it to register. Unable to get HBM working. No workarounds found yet
2) In some apps the fingerprint "pressed-state" glow does not appear. As a workaround, go to RR Settings > Interface > Fingerprint Settings and use the FOD icon that looks like a Cyan-colored circle.
3) NFC is broken on source built kernel. Whereas prebuilt OOS kernel breaks dt2w gestures. NFC is less important to me so I haven't used a prebuilt OOS kernel.
I would still take a complete backup before running any ROM and testing for a couple of days
And yes face unlock works
Please clean flash the update and let me know if any major bugs exist.
I have uploaded 1 here but I have not tested it yet. Unfortunately, I haven't got the time to test due to work stuff which requires me to have Gapps.
https://github.com/DroidFreak32/OTA/releases/download/rr-q/RROS-Q-8.6.9-20210524-avicii-NOGAPPS.zip
Click to expand...
Click to collapse
Is the ROM zip flashable via TWRP or I'll have to sideload it with a different recovery?

Broo is the fp working on 8.6.9 latest build? What other bugs are there? Did u build another update for RR?

Installation process??
Help me how can I install this rom can I flash this directly with TWRP/orangefox?
Or with pixel experience recovery through ADB sideload method?

Develop Bugs

welcome