Hi. I am a new member here. I have a Lenovo K4 Note with ROM installed, Resurrection Remix OS Nougat. Yesterday I was charging my smartphone in a state of tethering hotspot is on. When I see my network is inaccessible, I check my cellphone. It turns out that the cellphone is dead and the charging isn't working. Finally I tried to Flash with the SP Flash Tool. When I flash correctly, I get an Error: S_FT_ENABLE_DRAM_FAIL (4032). I looked for various solutions and tried it. Finally, I found a different error message: BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032). Please Help Me, I have spent a lot of time searching for solutions on the internet.
Related
Hey guys,
So my canvas a1 died after I flashed the stock kitkat rom on it using sptools coz it was stuck at the micromax logo. It has been a while since and Ive gotten a new phone but in last attempt to see if it is recoverable or scrap I'm posting this.
The Problem:
-Phone is completely dead wont power up or charge but is detected by sptool, so cant into fastboot or recovery mode.
- Windows detects the phone too with a notification sound and then says usb devices connected is not recognised
-I can still flash all+download using sptool I tried both Lollipop as well as stock kitkat roms,still its the same dead.
-If I try to use firmware upgrade in sptool I get this error: proinfo: failed to get PMT info
I've looked at quite a few threads and forums to no avail.If any one knows a solution to the problem it would be much appreciated.
Need help in fixing Lenovo K8 Note.
I flashed my device with SP Flash tool and was successful but when switch ON Tool DL image failed. So I downloaded the the file to fix Tool DL image but as I was trying to flash my screen got pop up with 'SECECT BOOT MOD' (Recovery, Fastboot, Normal). I even tried by removing the battery but still got stuck there. Please help me to fix this problem.
Waiting for positive response.
i have levono k8 note which gone in restarting problem. then i downloaded the 7.1.1 firmware and flash it using sp flash tool. The mistake i made was i didnt enable developer options. After flashing my phone didnt startup . then i tried firmware upgrade option in sp flash tools. that also didnt work.
then i tried formate all and download option now my phone is completely dead, it doesnt boot ,just a black screen. only notification light glows ip when i connected to charging or using p flash tools . please help me im very poor guy and i dont have money to buy one and its been almost one month i dont have phone. please try to respond.
Facing same issue
My Lenovo K8 note is not starting detection in PC and charging after flashing.
Hi, unfortunetly I bricked my android, something went wrong while installing LineageOS. I looked up some ways to unbrick it from our friends from India, everything is going smoothly up to the last step, error is popping out. I've tried few different softwares but SP Flash Tool is throwing the same error. Unchecking preloader doesn't help. Is there someone that can help me?
Krwawyy said:
Hi, unfortunetly I bricked my android, something went wrong while installing LineageOS. I looked up some ways to unbrick it from our friends from India, everything is going smoothly up to the last step, error is popping out. I've tried few different softwares but SP Flash Tool is throwing the same error. Unchecking preloader doesn't help. Is there someone that can help me?
Click to expand...
Click to collapse
Do unbrick again with Power + Volume up while bypass. Then you can pass it
Hi everyone. My Redmi note 5 pro is not turning on, it just gets stucked at the "redmi" logo. I tried disconnecting the battery but that didn't work. Since I can enter fastboot mode I also tried to flash the fastboot miui 12 rom with Miflash but an error appears saying "error flashing partition - write protected" (my phone has bootloader already unlocked). Even in EDL mode I couldn't flash the rom since it doesn't let me authenticate in my xiaomi account and miflash gets stucked at "edl authentication". Can you help me to unbrick my phone? Thank you.
nico.fiaba1 said:
Hi everyone. My Redmi note 5 pro is not turning on, it just gets stucked at the "redmi" logo. I tried disconnecting the battery but that didn't work. Since I can enter fastboot mode I also tried to flash the fastboot miui 12 rom with Miflash but an error appears saying "error flashing partition - write protected" (my phone has bootloader already unlocked). Even in EDL mode I couldn't flash the rom since it doesn't let me authenticate in my xiaomi account and miflash gets stucked at "edl authentication". Can you help me to unbrick my phone? Thank you.
Click to expand...
Click to collapse
Same thing happened to me and another one of my friends who owned redmi note 5 pro last week. Trust me I literally tried everything, but sadly I had to go for a new phone. The xiaomi service center told me the motherboard needed to be replaced which would cost 4-5k plus the screen would need to be replaced ( if you have even a couple screen cracks ) which would cost another 2-3k. Even then I would advise to go for a new phone.
Still sus how so many RN5 pro are getting the write protected error out of nowhere in the past 15 days. I did see a couple more posts about the same here.
Hi, I have the same problem. So I did enter EDL with the two pins on the mainboard, but when I try to flash miui 12 with QFIL (Qualcomm Flash Image Loader) I get authentication error. Even if I used a patched firehose programmer file. I tried 3 different patched firehose programmer files.
Does someone have a working patched firehose programmer file for Xiaomi Redmi Note 5 Pro?
So If we do not find a working patched firehose programmer file or a xiaomi developer who share his account for 5 min then I think we are not able to solve this problem..
ralaud said:
Hi, I have the same problem. So I did enter EDL with the two pins on the mainboard, but when I try to flash miui 12 with QFIL (Qualcomm Flash Image Loader) I get authentication error. Even if I used a patched firehose programmer file. I tried 3 different patched firehose programmer files.
Does someone have a working patched firehose programmer file for Xiaomi Redmi Note 5 Pro?
So If we do not find a working patched firehose programmer file or a xiaomi developer who share his account for 5 min then I think we are not able to solve this problem..
Click to expand...
Click to collapse
Search it on XDA forum there are links and explanation how to use it.
Tip: use MI flash tool (start with version from 2018 and than newer....)
Same thing happened to me in the last week of may, I even posted a thread here for help and my phone is even stuck on fastboot logo, sadly i couldn't find any solutions. If you find any solutions please reply to this post and help a brother.
Warvid said:
Same thing happened to me in the last week of may, I even posted a thread here for help and my phone is even stuck on fastboot logo, sadly i couldn't find any solutions. If you find any solutions please reply to this post and help a brother.
Click to expand...
Click to collapse
Did you end up solving the issue? I am also facing the exact same issue.