Related
Till now everyone heard and know that Motorola is building 64 bit ROM for our (Moto G5plus) Potter device as Oreo doesn't support 32-bit anymore.
What's the possibility of Implementation of treble and seemless Update with this ROM as They ate building Completely out of scratch.
I Know Lenovo Policy and Stuffs so Put only sensible reply I on basis of valid documents or proof rather saying randomly no offense
s4shubham4u said:
Till now everyone heard and know that Motorola is building 64 bit ROM for our (Moto G5plus) Potter device as Oreo doesn't support 32-bit anymore.
What's the possibility of Implementation of treble and seemless Update with this ROM as They ate building Completely out of scratch.
I Know Lenovo Policy and Stuffs so Put only sensible reply I on basis of valid documents or proof rather saying randomly no offense
Click to expand...
Click to collapse
No, moto isn't building 64-bit Oreo for our device. A 32-bit OS cannot be upgraded to 64-bit without a clean install (read: deleting all data), which is also true for every desktop OS (Windows, any linux distro, etc.) . It is actually sort of possible on linux, but extremely difficult and bothersome.
Also Oreo didn't drop support for 32-bit architectures. New apps must be 64-bit compatible, but that doesn't mean they'll stop working on a 32-bit OS. And Google covered 32-bit cases in their Oreo compatibility definition, meaning it is supported.
Basically it's never been done before by an oem, and there is no reason for moto to bother with it since G5+ has a maximum of 4GB RAM. 64-bit architectures even tend to increase RAM consumption due bigger pointers and slightly larger code.
As for treble, it's possible to update phones with treble support, as it has been done by other oems before, but I really doubt moto will bother. They said every phone will get at least one major update (with "at least" usually meaning "exactly"), so after Oreo the G5+ likely won't get android P, meaning they achieve nothing by making the phone treble compatible.
Dear developers of our G5 Plus @vache , @GtrCraft , @jhenrique09 , @mrlolli , @shamith ,
About PROJECT TREBLE I saw that the motorola will not support our device (OTA update with repartition would be risky).
But I saw that somebody already managed to carry the project treble to the Xiaomi Redmi Note 4. He had no support.
Interesting article on how he managed:
https://www.xda-developers.com/xiaomi-redmi-note-4-project-treble/
And there is another developer who is doing this for the Xiaomi Redmi 3 ( Screenshots )
Do you think it is possible to do the same for our G5 Plus since our hardware and spaces are better?
Maybe we could use the OEM or Firmware partition (if we can give it away)
in this video he shows how he did for redmi 4:
https://www.youtube.com/watch?v=wXd0D3g6r_0
---------- Post added at 03:40 PM ---------- Previous post was at 03:24 PM ----------
He said he did not repartition, he just altered an existing one:
https://forum.xda-developers.com/showpost.php?p=75527103&postcount=2233
Here is the Moto G6 Plus Stock rom with treble (*** do not install! ***), I think we could study the structure of the partitions because from one moto G to another it changes little, maybe this gives an idea of which partition to use.
https://androidfilehost.com/?fid=890278863836285868
Treble is available for testing on potter
eemgee said:
Treble is available for testing on potter
Click to expand...
Click to collapse
Really ? at where ?
jrs007 said:
Really ? at where ?
Click to expand...
Click to collapse
The potter telegram group.
eemgee said:
The potter telegram group.
Click to expand...
Click to collapse
can you give me the link to the group???
Still testing stage no volte on treble
All others are working and u miss Moto actions
---------- Post added at 02:00 PM ---------- Previous post was at 01:55 PM ----------
abhijit1998 said:
can you give me the link to the group???
Deleted
Click to expand...
Click to collapse
dhinesh_cool said:
Still testing stage no volte on treble
All others are working and u miss Moto actions
---------- Post added at 02:00 PM ---------- Previous post was at 01:55 PM ----------
abhijit1998 said:
can you give me the link to the group???
https://t.me/g5plus
Click to expand...
Click to collapse
thanks for the link... i do not use jio sim so no volte would be okay for me...
Click to expand...
Click to collapse
Anyone have success with installing Treble?
I installed the Treble ROM, followed by PixelExperience GSI. Tried to boot to ROM and it can't find /system/
Samip430 said:
Anyone have success with installing Treble?
I installed the Treble ROM, followed by PixelExperience GSI. Tried to boot to ROM and it can't find /system/
Click to expand...
Click to collapse
Haven't tried yet
Instaled Treble ROM sucessfully.
Samip430 said:
Anyone have success with installing Treble?
I installed the Treble ROM, followed by PixelExperience GSI. Tried to boot to ROM and it can't find /system/
Click to expand...
Click to collapse
I just tried flashing LAOS treble ROM, PHH AOSP 8.1 V19, Ace Kernel Treble and pico gapps, and it works!
abhijit1998 said:
dhinesh_cool said:
Still testing stage no volte on treble
All others are working and u miss Moto actions
---------- Post added at 02:00 PM ---------- Previous post was at 01:55 PM ----------
thanks for the link... i do not use jio sim so no volte would be okay for me...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Samip430 said:
Anyone have success with installing Treble?
I installed the Treble ROM, followed by PixelExperience GSI. Tried to boot to ROM and it can't find /system/
Click to expand...
Click to collapse
I did it, but before installing the GSI Pixel experience you have to do the factory reset on twrp.
the steps are as follows:
Before everything download Device ID apk (https://www.apkmirror.com/apk/evozi...release/device-id-1-3-2-android-apk-download/)
And a Brower (https://apkpure.com/via-browser-fast-light-geek-best-choice/mark.via.gp)
- TWRP-treble ( although twrp continues to show 3.2.1.0 note that in mount and backup the vendor partition is now appearing )
[If comming from broken treble/bug or anything wrong]
--> Wipe everything except internal.
- Lineage_treble ( This version of the lineage made by vache contains the necessary vendor partition files. )
- Factory reset (Don't if you gonna use LOS)
- GSI (Don't if your gonna use LOS)
- Gapps (Don't if you gonna use Pixel Experience) & Magisk mod by vache)
For GAPPS use OpenGapps Pico.
For Magisk only use the one on vache's cloud.
On LOS you shouldn't get google certification error,
If you get (on los or any gsi)
Just skip the setup wizard (do like if you don't use gapps)
Install DeviceID, and get your GSF number, then enter it on
this site, reboot and you're ready to go.
https://www.google.com/android/uncertified/
This tutorial was made by Martin
Does any (A-only) GSI (like phh-treble builds) work with the custom TWRP, or do they have to be specifically compiled for the g5+? I'm asking because I'm interested in the potential for this, but not really wanting to switch from a non-treble ROM just yet.
And here it is
https://forum.xda-developers.com/g5-plus/development/dev-project-treble-potter-t3801292
monster1612 said:
Does any (A-only) GSI (like phh-treble builds) work with the custom TWRP, or do they have to be specifically compiled for the g5+? I'm asking because I'm interested in the potential for this, but not really wanting to switch from a non-treble ROM just yet.
Click to expand...
Click to collapse
The point of a gsi (generic system image) is that it'll work on any treble-enabled device. Any A-only GSI will work, because the device specific drivers are in a partition which is left untouched.
monster1612 said:
Does any (A-only) GSI (like phh-treble builds) work with the custom TWRP, or do they have to be specifically compiled for the g5+? I'm asking because I'm interested in the potential for this, but not really wanting to switch from a non-treble ROM just yet.
Click to expand...
Click to collapse
i have used aosp, pixel experience gsi in my moto g5 plus, they booted up....
abhijit1998 said:
i have used aosp, pixel experience gsi in my moto g5 plus, they booted up....
Click to expand...
Click to collapse
So can I install the Global System Image instead of the build specific LineageOS image from https://forum.xda-developers.com/g5-plus/development/rom-lineageos-15-0-t3673573 ?
Does everything work like the LineageOS image?
Thanks!
Hello!
So I decided to make this GSI because I had never built one and for fun.
And since it works, why not share it with everyone :laugh:
Instructions to flash:
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
What doesn't work:
Probably the same as phhusson's AOSP GSI
(If you run into problems, tell me below and include your device name. Bugs without logs will be considered a feature)
What works:
Also probably the same as phhusson's AOSP GSI
Tested on:
Redmi 5 Plus with CrDroid vendor
Download:
https://drive.google.com/file/d/1flcmhPZE_OuHjZB1eDlGG_n1XEkWQDM3/view?usp=drivesdk
Do I need to flash gapps?
Yes.
Does VoLTE work?
It's reported to work apparently but I have no way to confirm this
Big thanks to @EnesSastim for getting me started with GSIs
And to @phhusson for his scripts
Enjoy the pizza!
reserved
There is a possibility that I'll make a gsi for a/b devices, but I'm focusing on other things first.
Screenshots:
What gapps do you recommend? Open gapps give me the device not certified notification
Possible to add pixel launcher ans pixel navbar ect? Thanks awesome rom.
dcduartee said:
What gapps do you recommend? Open gapps give me the device not certified notification
Click to expand...
Click to collapse
I flashed gapps nano and had no problems
dcduartee said:
What gapps do you recommend? Open gapps give me the device not certified notification
Click to expand...
Click to collapse
Flash magisk flash universal safety fix
---------- Post added at 07:37 PM ---------- Previous post was at 07:32 PM ----------
4PERTURE said:
There is a possibility that I'll make a gsi for a/b devices, but I'm focusing on other things first.
Click to expand...
Click to collapse
Nice rom got everything working so far on a nubia z17 is there a chance for automatic face unlock?maybe i am blind dont see it
whts the spesial Property of this rom?
4PERTURE said:
Hello!
So I decided to make this GSI because I had never built one and for fun.
And since it works, why not share it with everyone :laugh:
Instructions to flash:
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
What doesn't work:
Probably the same as phhusson's AOSP GSI
(If you run into problems, tell me below and include your device name. Bugs without logs will be considered a feature)
What works:
Also probably the same as phhusson's AOSP GSI
Tested on:
Redmi 5 Plus with CrDroid vendor
Download:
https://drive.google.com/file/d/1flcmhPZE_OuHjZB1eDlGG_n1XEkWQDM3/view?usp=drivesdk
Do I need to flash gapps?
Yes.
Does VoLTE work?
Probably not. (Comments regarding volte will be ignored)
Big thanks to @EnesSastim for getting me started with GSIs
And to @phhusson for his scripts
Enjoy the pizza!
Click to expand...
Click to collapse
great ROM the only thing that is missing from the camera and the Bluetooth sent from my moto z play
@4PERTURE pie recents not working on quickstep?
huawei honor v9《v8pro》
have incalling ring
all perfect in MI6X but the notification LED is still lit permanently, the battery is drained enough otherwise everything works perfectly. I will wait for a more stable version. Thanks for the work.
i like this gsi.. everything looks fine..
4PERTURE said:
Hello!
So I decided to make this GSI because I had never built one and for fun.
And since it works, why not share it with everyone :laugh:
Instructions to flash:
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
What doesn't work:
Probably the same as phhusson's AOSP GSI
(If you run into problems, tell me below and include your device name. Bugs without logs will be considered a feature)
What works:
Also probably the same as phhusson's AOSP GSI
Tested on:
Redmi 5 Plus with CrDroid vendor
Download:
https://drive.google.com/file/d/1flcmhPZE_OuHjZB1eDlGG_n1XEkWQDM3/view?usp=drivesdk
Do I need to flash gapps?
Yes.
Does VoLTE work?
It's reported to work apparently but I have no way to confirm this
Big thanks to @EnesSastim for getting me started with GSIs
And to @phhusson for his scripts
Enjoy the pizza!
Click to expand...
Click to collapse
Thanks for this amazing rom, i have an error message when boot regarding my device, Mi Mix 2S, I think was related to vendor, can you give link or file of CrDroid vendor? But that vendor I think can't work on my device, tried with 8.9.20 and 9.6.10.0 but it end in a bootlioop. Thanks.
VampireHeart said:
Thanks for this amazing rom, i have an error message when boot regarding my device, Mi Mix 2S, I think was related to vendor, can you give link or file of CrDroid vendor? But that vendor I think can't work on my device, tried with 8.9.20 and 9.6.10.0 but it end in a bootlioop. Thanks.
Click to expand...
Click to collapse
You want to flash a Redmi 5 Plus vendor on a Mi Mix 2S? That's not a wise choice.
4PERTURE said:
You want to flash a Redmi 5 Plus vendor on a Mi Mix 2S? That's not a wise choice.
Click to expand...
Click to collapse
Yes I realized after the crazy thing, but how I can solve?
I tried vendor for my device.
VampireHeart said:
Yes I realized after the crazy thing, but how I can solve?
I tried vendor for my device.
Click to expand...
Click to collapse
The error is kernel related and doesn't really affect normal usage so just ignore it
4PERTURE said:
The error is kernel related and doesn't really affect normal usage so just ignore it
Click to expand...
Click to collapse
Ok thanks like happened on other build, work normally.
Bluetooth earphone doesnt have sound
Hello! Probably today, ill receive my new phone, mi a2 lite
As i thinking good, this phone have treble support. Bur my questions is: why there is only one custom rom? Im moving grom Alice (Huawei P8 lite) to Daisy, and P8 lite have much more custom roms. Do you have any begginer guide for this phone? (Like best gcam version od sth) ;p
Greetings
Paweł
pawelik said:
Hello! Probably today, ill receive my new phone, mi a2 lite
As i thinking good, this phone have treble support. Bur my questions is: why there is only one custom rom? Im moving grom Alice (Huawei P8 lite) to Daisy, and P8 lite have much more custom roms. Do you have any begginer guide for this phone? (Like best gcam version od sth) ;p
Greetings
Paweł
Click to expand...
Click to collapse
I'm using Havoc OS now. It's very good and comes with notch compatible(gapps)
Go to guides and news tab and you see there how to install gsi roms
Whichever GSI I've installed had major lags, which made it unusable for me. Especially when opening an app from recents. Stock is the most fluid, so I got stuck with it.
Kineceleran said:
I'm using Havoc OS now. It's very good and comes with notch compatible(gapps)
Go to guides and news tab and you see there how to install gsi roms
Click to expand...
Click to collapse
marstonpear said:
Whichever GSI I've installed had major lags, which made it unusable for me. Especially when opening an app from recents. Stock is the most fluid, so I got stuck with it.
Click to expand...
Click to collapse
okay thanks
marstonpear said:
Whichever GSI I've installed had major lags, which made it unusable for me. Especially when opening an app from recents. Stock is the most fluid, so I got stuck with it.
Click to expand...
Click to collapse
Yes as you can know it is GSI not for mi a2 lite
I dont like major lags like you
New question, to install I must have RedWolf, or TWRP recovery?
pawelik said:
New question, to install I must have RedWolf, or TWRP recovery?
Click to expand...
Click to collapse
nevermind, i saw this post https://forum.xda-developers.com/mi-a2-lite/how-to/guide-how-to-install-android-p-gsi-roms-t3859248
lock
Kineceleran said:
Yes as you can know it is GSI not for mi a2 lite
I dont like major lags like you
Click to expand...
Click to collapse
Mi A2 Lite supports project treble, so it should be able to boot GSI without any hiccups. But here we are...
marstonpear said:
Mi A2 Lite supports project treble, so it should be able to boot GSI without any hiccups. But here we are...
Click to expand...
Click to collapse
It's android one device as you know it is a/b partition.
A/B Partition roms I have tried(every rom works well):
Resurrection remix 8.1
Havoc OS 9.0
Aosp Extended 9.0
---------- Post added at 04:36 PM ---------- Previous post was at 04:10 PM ----------
https://forum.xda-developers.com/showpost.php?p=78029178&postcount=29
I used this to install
Kineceleran said:
It's android one device as you know it is a/b partition.
A/B Partition roms I have tried(every rom works well):
Resurrection remix 8.1
Havoc OS 9.0
Aosp Extended 9.0
---------- Post added at 04:36 PM ---------- Previous post was at 04:10 PM ----------
https://forum.xda-developers.com/showpost.php?p=78029178&postcount=29
I used this to install
Click to expand...
Click to collapse
thank you so much!! <3
//edit: now I have compilation 10.0.3.0, he did it on 9.6.4.0, I can still do this?
//edit2: wew, this is mine 500th post! <3
pawelik said:
thank you so much!! <3
//edit: now I have compilation 10.0.3.0, he did it on 9.6.4.0, I can still do this?
//edit2: wew, this is mine 500th post! <3
Click to expand...
Click to collapse
Yes you can get 9.6.4.0 from here:
https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871
When you want to flash gapps dont download pico version it hasnt facelock and important things of google. download nano version
And also when you flash gapps it comes with notch compatible
If you lose your sim card signal, flash this img while on fastboot mode
https://drive.google.com/open?id=1Fck6chyNAQSvVSIkMb-5AjGJVfnDZRWh
"fastboot flash modem modem.img"
sorry for my bad english
Kineceleran said:
Yes you can get 9.6.4.0 from here:
https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871
When you want to flash gapps dont download pico version it hasnt facelock and important etc. download nano version
And also when you flash gapps it comes with notch compatible
If you lose your sim card signal, flash this img while on fastboot mode
https://drive.google.com/open?id=1Fck6chyNAQSvVSIkMb-5AjGJVfnDZRWh
"fastboot flash modem modem.img"
sorry for my bad english
Click to expand...
Click to collapse
okay, thanks, i hope i didn't f**k anything
Kineceleran said:
Yes you can get 9.6.4.0 from here:
https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871
When you want to flash gapps dont download pico version it hasnt facelock and important things of google. download nano version
And also when you flash gapps it comes with notch compatible
If you lose your sim card signal, flash this img while on fastboot mode
https://drive.google.com/open?id=1Fck6chyNAQSvVSIkMb-5AjGJVfnDZRWh
"fastboot flash modem modem.img"
sorry for my bad english
Click to expand...
Click to collapse
I must unlock bootloader after doing all?
pawelik said:
I must unlock bootloader after doing all?
Click to expand...
Click to collapse
Yes, DON'T! Relock
Kineceleran said:
Yes, DON'T! Relock
Click to expand...
Click to collapse
yes=/=don't, so... i must unlock this? for explain, i didnt have ANY modifications for now, like magisk/unlocker bl/gcam/twrp sor sth
pawelik said:
yes=/=don't, so... i must unlock this? for explain, i didnt have ANY modifications for now, like magisk/unlocker bl/gcam/twrp sor sth
Click to expand...
Click to collapse
Sorry for my bad english
before installing twrp or any modification, you have to unlock bootloader (this will erase your data but it's not important you will delete while flashing)
Kineceleran said:
Sorry for my bad english
before installing twrp or any modification, you have to unlock bootloader (this will erase your data but it's not important you will delete while flashing)
Click to expand...
Click to collapse
check private message if you can
Kineceleran said:
It's android one device as you know it is a/b partition.
A/B Partition roms I have tried(every rom works well):
Resurrection remix 8.1
Havoc OS 9.0
Aosp Extended 9.0
---------- Post added at 04:36 PM ---------- Previous post was at 04:10 PM ----------
https://forum.xda-developers.com/showpost.php?p=78029178&postcount=29
I used this to install
Click to expand...
Click to collapse
I used the method you mentioned but Havoc and PixelDust ROM were lagging . Is it me, or do you have small lags too?
marstonpear said:
I used the method you mentioned but Havoc and PixelDust ROM were lagging . Is it me, or do you have small lags too?
Click to expand...
Click to collapse
Yes i had lags like you and it is boring as f*ck
When i heard the 10.0.3.0 is released, i moved to that quickly
Havoc OS Is funny but it is laggy
I'm in stock rom right now and it is really fast and not laggy
Kineceleran said:
Yes i had lags like you and it is boring as f*ck
When i heard the 10.0.3.0 is released, i moved to that quickly
Havoc OS Is funny but it is laggy
I'm in stock rom right now and it is really fast and not laggy
Click to expand...
Click to collapse
I hated the square UI on stock, so I rooted the phone with Magisk and installed Substratum. Now I'm using Pixel theme on play store it's free and awesome. No more boring colors and ugly square corners. [If you want to install a substratum theme, make sure it supports Pie, otherwise the device will bootloop ]
I'm looking for ROM with Android 9 pie for moto z2 play device I tried several methods by GSI I tried the KVT and tried all but no ROMs like Lineage OS and mokee OS, resurrection remix OS and other ROMs work fine but the method by GSI gave fail and all say that date is corrupted wanted to know if it has any ROM available with Android 9 need help installing a GSI on the device someone from the forum can help me.
I have this same problem
KVT , remix OS They are bad but tell me which one you want to ride and I can help you.
in fact it does, but if you say it's bad you can tell me a better option or the best method of installation
Eduardo Bruch said:
in fact it does, but if you say it's bad you can tell me a better option or the best method of installation
Click to expand...
Click to collapse
LineageOS is the one that I use, at the moment there is only 2 Publish of Android 9.0, and both are bad the truth. the action is completed so far is the lineageOS of all that you have installed
I do not understand so far have some OS lieage being developed with Android 9.0 or have some different installation method because I could not by GSI or the device does not start or the message encryption or error in the part that says the data is corrupted I wanted in fact a simpler way to install a new patch
does anyone have any ROM with Android 9.0 running that can pass the rom link or some more effective method to install Android 9.0 on the device
Eduardo Bruch said:
does anyone have any ROM with Android 9.0 running that can pass the rom link or some more effective method to install Android 9.0 on the device
Click to expand...
Click to collapse
What TWRP do you use?
doesn't flashing KVT and then flashing Rom work for you??
but what should I do if the KVT does not work what would be the best procedure
can someone tell you if you have a ROM 9.0 being developed or somehow efficient to install a GSI without giving problems or teaching the most effective way
Shabbirkt said:
doesn't flashing KVT and then flashing Rom work for you??
Click to expand...
Click to collapse
Absolutely
---------- Post added at 05:19 PM ---------- Previous post was at 05:16 PM ----------
Eduardo Bruch said:
but what should I do if the KVT does not work what would be the best procedure
Click to expand...
Click to collapse
Firstly, start learning how to code and as you learn enough, dig through the works of our existing developers, take some pieces from there and the develope a pie rom which you can give it to us for testing and at last you will have a rom with Pie. Should take much time.
^_^
---------- Post added at 05:21 PM ---------- Previous post was at 05:19 PM ----------
Eduardo Bruch said:
I do not understand so far have some OS lieage being developed with Android 9.0 or have some different installation method because I could not by GSI or the device does not start or the message encryption or error in the part that says the data is corrupted I wanted in fact a simpler way to install a new patch
Click to expand...
Click to collapse
Go to TWRP, the go for the wipe option and to the right of the advanced wipe option, you will find format data option, select that and all your data will be erased and then flash your KVT and then GSI
the KVT is giving error when I give fash it installs normally and then the GSI but when it starts it appears the message saying that the phone is encrypted but being that I do not use encryption and after. low to say that the data system is corrupted I do not know what to do
Eduardo Bruch said:
the KVT is giving error when I give fash it installs normally and then the GSI but when it starts it appears the message saying that the phone is encrypted but being that I do not use encryption and after. low to say that the data system is corrupted I do not know what to do
Click to expand...
Click to collapse
I just can not use KVT because of this fact
KVT does not work
how do I install the KVT or a ro pri in this case of these partitions does anyone know what Vando to use or what I can do
These days, I find many people asked how to enable fingerprint on Mi 8 PRO(runs GSI), so I'd write this thread to let you konw. I only test the phh's AOSP v217 with MIUI 12 20.5.21 vendor. If you want to use other GSI or other vendor you can also test whether fingerprint works on it by following these steps. However, these instructions may only works on Android 10.
I assume you are familiar enough how to flash GSI on Mi 8 pro. If you just a rookie, I recommand you to read this passage.(Of course, don't forget follow the instructions what I writed).
Follow these steps:
Step 1: Flash the MIUI 12 rom(20.5.21) by this TWRP.
Step 2: Find the GSI. ATTENTION: The GSI needs to be ARM64-AB!!! . I will recommand the phh's AOSP GSI v217(Because I only test it). Of course, you can chose other GSIs you like and test whether the fingerprint works on it.
Step 3: Flash it by the TWRP.
That's all. Hope you enjoy it!
Did the partition layout change with MIUI 12?
The Mi 8 Pro (equuleus) used to be a A only GSI image. I would like to try this... even if I replaced my Mi 8 Pro recently with a OnePlus 7 pro... mainly due to the fingerprint!!!
nealed said:
Did the partition layout change with MIUI 12?
The Mi 8 Pro (equuleus) used to be a A only GSI image. I would like to try this... even if I replaced my Mi 8 Pro recently with a OnePlus 7 pro... mainly due to the fingerprint!!!
Click to expand...
Click to collapse
I saw it on phh's AOSP wiki on github. That's what he said:
Why should I use GSI for A/B devices to some A-only devices? : On Android 9, Google changed the requirements and all devices shipped with Android 9 must use "system-as-root". Before this change, only A/B devices were system-as-root and GSI name was separated by A-only and A/B. For this historical reasons, you have to use GSI for A/B on the devices shipped with Android 9+.
If I try to flash the arm64-a Android 10 GSI then it can't boot and just go to the fastboot mode. However, if I flash Android 10 arm64-ab rom, it will succeed to boot. So I think we should use arm64-ab rom instead of arm64-a rom(at least on Android 10 we should do it).
Arm64-ab-floss OR Arm64-ab-go OR Arm64-ab-vanilla?
Sent from my MI 8 Pro using Tapatalk
---------- Post added at 12:59 PM ---------- Previous post was at 12:58 PM ----------
Kimsimth said:
I saw it on phh's AOSP wiki on github. That's what he said:
Why should I use GSI for A/B devices to some A-only devices? : On Android 9, Google changed the requirements and all devices shipped with Android 9 must use "system-as-root". Before this change, only A/B devices were system-as-root and GSI name was separated by A-only and A/B. For this historical reasons, you have to use GSI for A/B on the devices shipped with Android 9+.
If I try to flash the arm64-a Android 10 GSI then it can't boot and just go to the fastboot mode. However, if I flash Android 10 arm64-ab rom, it will succeed to boot. So I think we should use arm64-ab rom instead of arm64-a rom(at least on Android 10 we should do it).
Click to expand...
Click to collapse
Arm64-ab-floss OR Arm64-ab-go OR Arm64-ab-vanilla?
Sent from my MI 8 Pro using Tapatalk
Jord5s said:
Arm64-ab-floss OR Arm64-ab-go OR Arm64-ab-vanilla?
Sent from my MI 8 Pro using Tapatalk
---------- Post added at 12:59 PM ---------- Previous post was at 12:58 PM ----------
Arm64-ab-floss OR Arm64-ab-go OR Arm64-ab-vanilla?
Sent from my MI 8 Pro using Tapatalk
Click to expand...
Click to collapse
It up to you. You should chose the one you prefer. If you dont know what differences of them, just search it on Google. And all of them can succeed to boot.
Kimsimth said:
It up to you. You should chose the one you prefer. If you dont know what differences of them, just search it on Google. And all of them can succeed to boot.
Click to expand...
Click to collapse
Why must you flash MIUI12 first? I am running MIUI 11.0.5 Android 10...
Sent from my MI 8 Pro using Tapatalk
Jord5s said:
Why must you flash MIUI12 first? I am running MIUI 11.0.5 Android 10...
Sent from my MI 8 Pro using Tapatalk
Click to expand...
Click to collapse
Just because the fingerprint only works on MIUI 12 vendor. Just backup your data and flash the MIUI 12 rom.
Thanks for the guide !
you forget to mention we must had advance wipe the system partition -will mostly go into fastboot if not-
plus, anyone was able to pass safetynet ? my banks apps not working at all even after using magiskhide props
even whatsapp tells me this is an unofficial ROM
Aldwarii said:
Thanks for the guide !
you forget to mention we must had advance wipe the system partition -will mostly go into fastboot if not-
Click to expand...
Click to collapse
That I mentioned this thread
Aldwarii said:
plus, anyone was able to pass safetynet ? my banks apps not working at all even after using magiskhide props
even whatsapp tells me this is an unofficial ROM
Click to expand...
Click to collapse
U can do this by uninstall root. By click phh settings->Securize then you will rid out of root. However, you can use "MagiskHide Props Config" module to pass the safetynet.
1.) Install the "MagiskHide Props Config" module
2.) Reboot
3.) Run a terminal app and type:
su
props
4.) Set the fingerprint with the following keys (pressing enter after each):
1 -> f ->Any way u want(but I recommend you to chose the Xiaomi option), just follow the instruction of it.
5.)reboot.
And dont forget to uninstall the edxposed module first if you install it before.
Kimsimth;82980891
U can do this by uninstall root. By click phh settings->Securize then you will rid out of root. However said:
su
props[/B]
4.) Set the fingerprint with the following keys (pressing enter after each):
1 -> f ->Any way u want(but I recommend you to chose the Xiaomi option), just follow the instruction of it.
5.)reboot.
And dont forget to uninstall the edxposed module first if you install it before.
Click to expand...
Click to collapse
I need my root, so I can't uninstall it
I applied a factory reset, with internal storage wipe to ensure everything been deleted, then installed Magiskhide props and set the proper fingerprint "xiaomi mi 8 android 10"
hided google play services and store and framework in the MagiskHide
and now, wow ! it worked
but there is still 2 applications that haven't worked
1) STCpay
2) Alinma internet
may you please try these 2 bank applications to indicate if the issue only with me or not please ?
Aldwarii said:
I need my root, so I can't uninstall it
I applied a factory reset, with internal storage wipe to ensure everything been deleted, then installed Magiskhide props and set the proper fingerprint "xiaomi mi 8 android 10"
hided google play services and store and framework in the MagiskHide
and now, wow ! it worked
but there is still 2 applications that haven't worked
1) STCpay
2) Alinma internet
may you please try these 2 bank applications to indicate if the issue only with me or not please ?
Click to expand...
Click to collapse
The Alinma internet can be opened like this. However, the stc pay still cant be opened. You can read this passage "Time attack-based bypass script (Deprecated)" and follow it to make the app work I think. Good luck.
Btw I use the Lineage 17.1 rom now.
Kimsimth said:
The Alinma internet can be opened like this. However, the stc pay still cant be opened. You can read this passage "Time attack-based bypass script (Deprecated)" and follow it to make the app work I think. Good luck.
Btw I use the Lineage 17.1 rom now.
Click to expand...
Click to collapse
Tried that, but didn't get any benefit, even the worked apps had crashed after reboot :/
this GSI stuff is just a headache, no safetynet pass, android auto not working, device get very hot, battery drained faster -better than MIUI12 though- with no additional features upon MIUI at all
I think I will give the lineageOS a try tonight
Thank you my friend for you support all the way "big heart"