Related
What I may have done wrong: I was trying to go back to stock because I couldn't get CWM to mount to the SD card. So I figured I would start from scratch.
I opened up ODIN, went into download mode, selected the PIT file and selected the TAR file. The thing was though, is that when I selected the PIT file, it automatically selected "Re-Partition Device". I didn't notice this until after I pressed Start. It ended up failing very shortly after it started, so I figured I'd try again without Re-Partioning. I selected the same files, and it flashed but it flashed weirdly. It only took a few seconds and then it said it was done but I remember it saying something like 0/0 completed or something.
SO NOW, when I connect it to my computer, it doesn't recognize the device at all. The phone is totally black. I've tried taking out the battery, sim card, connecting USB with both +/- pressed down and it still doesn't recognize it.
The worst thing about all of this? This was my brother's Christmas present and like the idiot I am, I ruined it.
I've read mixed things about a USB jig - some say that if I can't get into download mode without a jig then it's useless.
I'm open to anything at this point. I just want to get my brother his phone... If it does end up being that the phone is dead (we bought it at Best Buy), what should I say to them? Should I go through Best Buy or T-Mobile?
*Any* help would be appreciated.
A usb jig may work ! And you can make yours by yourself
Enviado desde mi GT-I9100 usando Tapatalk
take out battery, hold down power button/volume up/down
if you feel a vibration, the phone is not dead
if you don't take it to bestbuy and tell them the phone broke itself
Tried this - no vibration whatsoever. I'm not sure when you wanted me to plug in the power. If I just plug it into the USB without the battery the computer recognizes when I let go of the volume buttons. Like it's disconnecting from the machine.
It comes up as 'qhsusb_dload'.
Also, do you have experience with Best Buy? Are you sure I'd go through them and not T-Mobile?
QHUSB_DLOAD stands for
qualcomm high speed usb download mode
sounds fully bricked to me(dont quote me on it)
what this means is that if you send it back to bestbuy/tmo/samsung they will not know if its rooted or not, so they cant refuse to fix it
again, wait for someone of more knowledge to confirm QHUSB_DLOAD = full brick(although im pretty sure it is)
---------- Post added at 07:01 AM ---------- Previous post was at 06:58 AM ----------
actually, i just found another thread with similar situation
skillllllz said:
**UPDATE** I closed Oden and killed all processes related to Kies. Then with my phone still in download mode, I quickly unplugged and plugged the cord into the PC's USB port. Odin was able to communicate with the phone and flash the firmware successfully. Hopefully this info will be useful to some other soul and save their butt.
I think I may have bricked my phone also. I was flashing the latest firmware also, it almost completed and then Odin said it failed. Now the device is still in download mode, Odin can't seem to establish a connection, and I'm afraid to pull the USB cable out or power-cycle the phone. Anyone have any ideas? This really sux
Click to expand...
Click to collapse
this guy has his phone in download mode still
so he was able to rescue it, now that your phone does not even respond, then you should have no problem getting it fixed by samsung(whether directly, thru tmobile or bestbuy)
---------- Post added at 07:25 AM ---------- Previous post was at 07:01 AM ----------
keep in mind
DO NOT TELL THEM YOU WERE USING ODIN/TRYING TO ROOT THE PHONE OR ANYTHING
just tell them this happened when you were browsing or something
Hello all, I have a problem with my LG oprimus G pro:
I have updated to official 4.4.2 and it was a bit buggy. So I decided to flash CyanogenMod
So the first thing is to root the phone I did that from here
http://forum.xda-developers.com/showthread.php?t=2695263
post #4 guy named galapagos has roottool.kitkat.zip attached. So I downloaded roottool.kitkat.zip unpacked it to "root" folder
folder tree:
--------root
--root.zip
--adb.exe
--AdbWinApi.dll
--AdbWinUsbApi.dll
--StartRoot.bat
and ran the StartRoot.bat that I found inside.
All it did was reboot the phone to stock recovery waited for me to click install from sideload and it than executed next command:
.\adb.exe sideload root.zip
the phone rebooted, and I installed rootchecker app to test if I had root. The test was positive. cool :laugh:
now I wanted to install CyanogenMod I downloaded the latest build from here http://download.cyanogenmod.org/?device=e980&type=
I renamed the file I downloaded to root.zip placed it in the folder where StartRoot.bat is (replacing the old root.zip) and ran StartRoot.bat once again.
the phone verified the root.zip and started to install it. :angel: In the middle of installation it aborted the installation and rebooted the phone. it will not boot to android system (I wonder why ) instead I am greated with LG security error after witch the phone turns itself off.
I have tried getting into download mode buy key combination= hold volume+ and volume - together and connect usb. It only starts charging.
when I press volume down+ home+power it takes me to factory hard reset. but the reset changes nothing...
do you have any ideas how I can unbrick my phone? Will USB jig work on LG phones?
Manually uninstall and reinstall LG drivers. text me if it works for you.
Sent from my SGH-T959 using XDA Free mobile app
I got the problem too with my G PRO, that I get a hard time to get into download mode. It always starts the phone. So just be patient, try it more, just remove the battery if the method gets awry. I tried it many times, then it worked.
---------- Post added at 01:29 PM ---------- Previous post was at 01:28 PM ----------
OR
You can try to plug your phone on the PC, go to cmd within adb, key in adb reboot recovery. Voila.
MitoTakatori said:
I got the problem too with my G PRO, that I get a hard time to get into download mode. It always starts the phone. So just be patient, try it more, just remove the battery if the method gets awry. I tried it many times, then it worked.
---------- Post added at 01:29 PM ---------- Previous post was at 01:28 PM ----------
OR
You can try to plug your phone on the PC, go to cmd within adb, key in adb reboot recovery. Voila.
Click to expand...
Click to collapse
you clearly didnt read the whole post
I dont have the system to boot to
souleater11 said:
Manually uninstall and reinstall LG drivers. text me if it works for you.
Sent from my SGH-T959 using XDA Free mobile app
Click to expand...
Click to collapse
tried many times the "normal way" and with remove battery way
no luck...
I even tried with live linux usb and still no luck..
I dont know why wold drivers have anything to do with download mode?
if you have e988 you could upload a video on youtube on how to get to download mode DD
I cant seem to find any videos on that for my phone.
Damjan94 said:
tried many times the "normal way" and with remove battery way
no luck...
I even tried with live linux usb and still no luck..
I dont know why wold drivers have anything to do with download mode?
if you have e988 you could upload a video on youtube on how to get to download mode DD
I cant seem to find any videos on that for my phone.
Click to expand...
Click to collapse
I also have the same problem with my F240S, cann't go to download mode, and can't flash this damn Lollipop kdz
Hello everyone, its been a while, thainks to all for trying to help me
In case anyone is wondering, after I realised I couldnt do anything myself, I gave the phone to phone service.
Acctualy, I gave it to couple of services, some of them didnt know what the problem was, and they were unable to Jtag it.
The others said it was the problem with the emmc chip.
the last service I gave it to (as I understand) tried to flash it with firmware? that isnt made for E988.
Now when I power it on the screen is blank and the button led is changing collers.
I have accsepted the fact that the phone is dead
kuzagar said:
I also have the same problem with my F240S, cann't go to download mode, and can't flash this damn Lollipop kdz
Click to expand...
Click to collapse
have you bricked it as well, or can you get back in the andriod os?
Damjan94 said:
have you bricked it as well, or can you get back in the andriod os?
Click to expand...
Click to collapse
my problem was solved....actually I tried and retried a few times the same technique...press volume up + volume down and plug in usb cable...finally it worked and I flashed the loliipop kdz...many thanks
yea, i was going to say hold down volume + and plug in usb cable to get into download mode. if that doesn't work, it's a world of headache.
it's not just the phone you should check if youre having problems flashing/rooting/going into download mode, you should also check your computer, do a reboot or try reinstalling your mobile drivers and the apps you are going to use.
Damjan94 said:
Hello all, I have a problem with my LG oprimus G pro:
I have updated to official 4.4.2 and it was a bit buggy. So I decided to flash CyanogenMod
So the first thing is to root the phone I did that from here
http://forum.xda-developers.com/showthread.php?t=2695263
post #4 guy named galapagos has roottool.kitkat.zip attached. So I downloaded roottool.kitkat.zip unpacked it to "root" folder
folder tree:
--------root
--root.zip
--adb.exe
--AdbWinApi.dll
--AdbWinUsbApi.dll
--StartRoot.bat
and ran the StartRoot.bat that I found inside.
All it did was reboot the phone to stock recovery waited for me to click install from sideload and it than executed next command:
.\adb.exe sideload root.zip
the phone rebooted, and I installed rootchecker app to test if I had root. The test was positive. cool :laugh:
now I wanted to install CyanogenMod I downloaded the latest build from here http://download.cyanogenmod.org/?device=e980&type=
I renamed the file I downloaded to root.zip placed it in the folder where StartRoot.bat is (replacing the old root.zip) and ran StartRoot.bat once again.
the phone verified the root.zip and started to install it. :angel: In the middle of installation it aborted the installation and rebooted the phone. it will not boot to android system (I wonder why ) instead I am greated with LG security error after witch the phone turns itself off.
I have tried getting into download mode buy key combination= hold volume+ and volume - together and connect usb. It only starts charging.
when I press volume down+ home+power it takes me to factory hard reset. but the reset changes nothing...
do you have any ideas how I can unbrick my phone? Will USB jig work on LG phones?
Click to expand...
Click to collapse
why now ???
Hello guys, I'm sorry if i posted this here, i cant seem to find a forum about LG D686 dual.
so heres my problem, last night, I tried using LG User Support Tool, then a pop up appeared that there is a new software update for my phone(i believe it is a kitkat update bc i had an OTA notif for a new OS upgrade last few days before this happened) , and of course i did a backup of my files using LG Backup then proceeded to update my phone using the LG tool. Now, after downloading, updating and stuff finished, I got stuck in the logo. I tried using the hard reset method "power+vol down" trick but it doesn't work. but i can go to "download mode". what did i do that this happened?
please help me, this is my only phone for the moment
blackdemigod09 said:
Hello guys, I'm sorry if i posted this here, i cant seem to find a forum about LG D686 dual.
so heres my problem, last night, I tried using LG User Support Tool, then a pop up appeared that there is a new software update for my phone(i believe it is a kitkat update bc i had an OTA notif for a new OS upgrade last few days before this happened) , and of course i did a backup of my files using LG Backup then proceeded to update my phone using the LG tool. Now, after downloading, updating and stuff finished, I got stuck in the logo. I tried using the hard reset method "power+vol down" trick but it doesn't work. but i can go to "download mode". what did i do that this happened?
please help me, this is my only phone for the moment
Click to expand...
Click to collapse
Don't know about your phone but the phone of this Forum, Optimus G Pro, to to download mode is Vol+/Vol-/ plug in USB cable (while its plugged into the computer). Don't need the power button. But it could be different for your phone.
Thank yo!! Now I can use flash tool to unbrick!!Thank you very much christran12.you saved my life .i researched all over how to get download mod but couldnt find .now i used vol+ &- and usb cable voila!!
Sent from my Micromax A76 using XDA Free mobile app
---------- Post added at 08:34 PM ---------- Previous post was at 08:29 PM ----------
HOO!!!THANKS CHRISTRAN12.I HAVE UNBRICKED MY G PRO. LOVE YOU!!!!!!!!!!!!!
Sent from my Micromax A76 using XDA Free mobile app
Haha sheesh
2SHAYNEZ
I rooted my phone about a month ago using PurpleDrake and now I'm on SkyDragon G3 V0.0.5 w/ TWRP. I had never been able to boot into download but thought nothing of it since it wasn't crucial at the time. Then, yesterday I accidentally took the new OTA update, but was able to fix it with the ADB commands that others have posted. Being able to get into download mode would have made life easier so I tried to fix it today. Flashed stock boot.img and tried to re-run PurpleDrake to see if I missed a step but it won't detect my phone for a reason I don't know. At my wit's end.
Not being able to get into download mode is a concern in case I ever to fully return to stock. Wondering if any one has some insight on how I can do that or if there's some image file I need to flash, etc.?
Thanks!
mypenismighty said:
I rooted my phone about a month ago using PurpleDrake and now I'm on SkyDragon G3 V0.0.5 w/ TWRP. I had never been able to boot into download but thought nothing of it since it wasn't crucial at the time. Then, yesterday I accidentally took the new OTA update, but was able to fix it with the ADB commands that others have posted. Being able to get into download mode would have made life easier so I tried to fix it today. Flashed stock boot.img and tried to re-run PurpleDrake to see if I missed a step but it won't detect my phone for a reason I don't know. At my wit's end.
Not being able to get into download mode is a concern in case I ever to fully return to stock. Wondering if any one has some insight on how I can do that or if there's some image file I need to flash, etc.?
Thanks!
Click to expand...
Click to collapse
volume up button + plug the phone into the computer here is everything you need for stock in one thread http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667
mypenismighty said:
I rooted my phone about a month ago using PurpleDrake and now I'm on SkyDragon G3 V0.0.5 w/ TWRP. I had never been able to boot into download but thought nothing of it since it wasn't crucial at the time. Then, yesterday I accidentally took the new OTA update, but was able to fix it with the ADB commands that others have posted. Being able to get into download mode would have made life easier so I tried to fix it today. Flashed stock boot.img and tried to re-run PurpleDrake to see if I missed a step but it won't detect my phone for a reason I don't know. At my wit's end.
Not being able to get into download mode is a concern in case I ever to fully return to stock. Wondering if any one has some insight on how I can do that or if there's some image file I need to flash, etc.?
Thanks!
Click to expand...
Click to collapse
which adb commands did you use to fix it because I have the same problem and how are you able to access adb command prompts?
jameslee2 said:
which adb commands did you use to fix it because I have the same problem and how are you able to access adb command prompts?
Click to expand...
Click to collapse
I linked you in the other thread
ThePagel said:
volume up button + plug the phone into the computer here is everything you need for stock in one thread http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667
Click to expand...
Click to collapse
Thanks for the reply. Sorry, I could have been more clear in my post. I have visited that thread and held volume up while plugging my phone in, but all that happens is the LG logo screen pops up for a few seconds, then the phone shows the charging percentage. When I try to do it from the advanced reboot menu when the phone is powered on, it simply reboots into the system. Same deal if I try to do it from TWRP. Really not sure what I'm doing wrong here. Is it possible that I somehow corrupted the bootloader or something else that's hopefully fixable?
mypenismighty said:
Thanks for the reply. Sorry, I could have been more clear in my post. I have visited that thread and held volume up while plugging my phone in, but all that happens is the LG logo screen pops up for a few seconds, then the phone shows the charging percentage. When I try to do it from the advanced reboot menu when the phone is powered on, it simply reboots into the system. Same deal if I try to do it from TWRP. Really not sure what I'm doing wrong here. Is it possible that I somehow corrupted the bootloader or something else that's hopefully fixable?
Click to expand...
Click to collapse
Are you using the stock data cable. Also try pulling the battery for 10 sec then pluging in the USB.
Sent from my LG-D851 using XDA Free mobile app
jameslee2 said:
which adb commands did you use to fix it because I have the same problem and how are you able to access adb command prompts?
Click to expand...
Click to collapse
adb reboot download
---------- Post added at 07:50 AM ---------- Previous post was at 07:46 AM ----------
mypenismighty said:
Thanks for the reply. Sorry, I could have been more clear in my post. I have visited that thread and held volume up while plugging my phone in, but all that happens is the LG logo screen pops up for a few seconds, then the phone shows the charging percentage. When I try to do it from the advanced reboot menu when the phone is powered on, it simply reboots into the system. Same deal if I try to do it from TWRP. Really not sure what I'm doing wrong here. Is it possible that I somehow corrupted the bootloader or something else that's hopefully fixable?
Click to expand...
Click to collapse
I think you made a wrong procedure.
Take the battery out and put back in.
Press and hold volume up button.
Plug in the cable.
Release the button when you see download mode screen.
In addition, make sure you have LG PC Suite with phone driver installed.
Cal-El said:
Are you using the stock data cable. Also try pulling the battery for 10 sec then pluging in the USB.
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
mingkee said:
adb reboot download
---------- Post added at 07:50 AM ---------- Previous post was at 07:46 AM ----------
I think you made a wrong procedure.
Take the battery out and put back in.
Press and hold volume up button.
Plug in the cable.
Release the button when you see download mode screen.
In addition, make sure you have LG PC Suite with phone driver installed.
Click to expand...
Click to collapse
Thanks but I have already done this with the same result as I've described. I know how it is supposed to be done with the hardware keys and I am using the stock data cable. Even watched a YouTube video demonstrating how it is to be done. Are there any other possibilities?
Just tried it with my nexus 7 cable on a different usb port (which I had done couple times before) and it worked this time! Not sure why or how but appreciate the help, everyone!
So I Bricked my Note 4 a while back and from what i've been reading on the forum is that I need a UnBrick IMage to install to an SD card and may bring it back to life.
It was booting into recovery and USB mode a few times when I was trying to flash stock F/W.
The reason for trying to flash was that it was very buggy, Freeze and lock up a lot.
So I flashed with Odin a few different times to no avail. Most every time it would fail right away, nothing worked.
Anyhow I finally got it to flash successfully and now it doesn't respond, won't go into recovery, won't power on, nothing.
When plugged into PC I Get the Bulk_Qs something or another.
Since I now have noticed that someone has finally successfully rooted the VZW note 4, Iwas hoping there might be a way to get an unbrick image or something.
Any Help would be much appreciated!
Forget about a "unbrick image" or whatever that is. The only way to unbrick Samsung devices is with Samsung Kies. You will need your serial number which is only located on the retail box your phone came in. For some strange reason Samsung decided not to put the serial number on the Note 4 sticker underneath the battery.
Samsung Smart Switch will work as well.
Sent from my SM-N910V using Tapatalk
---------- Post added at 08:44 AM ---------- Previous post was at 08:36 AM ----------
Step 1: Download and install Samsung Smart Switch from here http://www.samsung.com/us/smart-switch/assets/downloads/Smart Switch PC_setup.exe
Step 2: Start the application and hit the "more" tab at the top
Step 3: Hit the "Device initialization" tab
Step 4: Enter your model number exactly like this "SM-N910V" the actual letters must be capitalized.
Step 5: Enter your serial number (Found on your box or purchase reciept) Verizon may also have this information.
Step 6: Just follow the onscreen prompts and put your device into download mode and connect to PC.
Process may take 30 minutes or more depending on your Internet connection.
Sent from my SM-N910V using Tapatalk
---------- Post added at 08:48 AM ---------- Previous post was at 08:44 AM ----------
Many will tell you to download Odin and yada yada yada. The process above will put your device back to factory state. With stock everything. No need to download tars, zips, or any of that other crap you are thinking about. This will wipe your device completely and put you on the latest 5.1.1 firmware.
Samsung Kies will also do this same process. Which can be found here http://www.samsung.com/in/support/usefulsoftware/KIES/
Sent from my SM-N910V using Tapatalk
---------- Post added at 08:49 AM ---------- Previous post was at 08:48 AM ----------
If none of this work... you are scre**! [email protected]
Sent from my SM-N910V using Tapatalk
---------- Post added at 08:54 AM ---------- Previous post was at 08:49 AM ----------
BTW... the serial number is NOT your IMEI.
It will look something like "R38G475A0LX"
Sent from my SM-N910V using Tapatalk
xelanetloads said:
BTW... the serial number is NOT your IMEI.
It will look something like "R38G475A0LX"
Click to expand...
Click to collapse
On a non-bricked phone, is there a way to determine this from the phone? I didn't see it listed in any of the "About Phone" areas.
Nissmo33 said:
So I Bricked my Note 4 a while back and from what i've been reading on the forum is that I need a UnBrick IMage to install to an SD card and may bring it back to life.
It was booting into recovery and USB mode a few times when I was trying to flash stock F/W.
The reason for trying to flash was that it was very buggy, Freeze and lock up a lot.
So I flashed with Odin a few different times to no avail. Most every time it would fail right away, nothing worked.
Anyhow I finally got it to flash successfully and now it doesn't respond, won't go into recovery, won't power on, nothing.
When plugged into PC I Get the Bulk_Qs something or another.
Since I now have noticed that someone has finally successfully rooted the VZW note 4, Iwas hoping there might be a way to get an unbrick image or something.
Any Help would be much appreciated!
Click to expand...
Click to collapse
You'll need an unbrick image. I'll make you one tomorrow. QHSUSB_BULK means an issue with GPT/MBR on eMMC. Rest assured, a MicroSD with the unbrick image should fix your issue.
xelanetloads said:
Forget about a "unbrick image" or whatever that is. The only way to unbrick Samsung devices is with Samsung Kies. You will need your serial number which is only located on the retail box your phone came in. For some strange reason Samsung decided not to put the serial number on the Note 4 sticker underneath the battery.
Samsung Smart Switch will work as well.
Sent from my SM-N910V using Tapatalk
---------- Post added at 08:44 AM ---------- Previous post was at 08:36 AM ----------
Step 1: Download and install Samsung Smart Switch from here http://www.samsung.com/us/smart-switch/assets/downloads/Smart Switch PC_setup.exe
Step 2: Start the application and hit the "more" tab at the top
Step 3: Hit the "Device initialization" tab
Step 4: Enter your model number exactly like this "SM-N910V" the actual letters must be capitalized.
Step 5: Enter your serial number (Found on your box or purchase reciept) Verizon may also have this information.
Step 6: Just follow the onscreen prompts and put your device into download mode and connect to PC.
Process may take 30 minutes or more depending on your Internet connection.
Sent from my SM-N910V using Tapatalk
---------- Post added at 08:48 AM ---------- Previous post was at 08:44 AM ----------
Many will tell you to download Odin and yada yada yada. The process above will put your device back to factory state. With stock everything. No need to download tars, zips, or any of that other crap you are thinking about. This will wipe your device completely and put you on the latest 5.1.1 firmware.
Samsung Kies will also do this same process. Which can be found here http://www.samsung.com/in/support/usefulsoftware/KIES/
Sent from my SM-N910V using Tapatalk
---------- Post added at 08:49 AM ---------- Previous post was at 08:48 AM ----------
If none of this work... you are scre**! [email protected]
Sent from my SM-N910V using Tapatalk
---------- Post added at 08:54 AM ---------- Previous post was at 08:49 AM ----------
BTW... the serial number is NOT your IMEI.
It will look something like "R38G475A0LX"
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
This won't work for the state his phone is in.
I see.
Sent from my SM-N910V using Tapatalk
---------- Post added at 05:10 PM ---------- Previous post was at 05:08 PM ----------
Sizzlechest said:
On a non-bricked phone, is there a way to determine this from the phone? I didn't see it listed in any of the "About Phone" areas.
Click to expand...
Click to collapse
I semi bricked my device once screwing around and couldn't find anything on the phone or any software to get the correct serial number.
Sent from my SM-N910V using Tapatalk
xelanetloads said:
I see.
Sent from my SM-N910V using Tapatalk
---------- Post added at 05:10 PM ---------- Previous post was at 05:08 PM ----------
I semi bricked my device once screwing around and couldn't find anything on the phone or any software to get the correct serial number.
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
Are you on Windows? I'll have an unbrick image today. You'll want to install Win32DiskImager, and make sure you have an SD reader.
Yeah I'm on windows and have an SD reader.
I greatly appreciate it.
Sent from my SM-G900V using Tapatalk
My note is working fine, but I love having stuff like this handy for when I inevitably break something? ! Would be appreciative of you guys update this thread with the undock image and some instructions!!
Sent from my Nexus 7 using Tapatalk
I too am curious about this "unbrick image"
I have a Galaxy Mega that enters download mode but fails every attempt to flash anything. Once powered on it displays a download mode error with yellow triangle. Recovery mode not working as well. For me, that's a "brick"
Sent from my SM-N910V using XDA-Developers mobile app
!!Update!!
ryanbg sent me the unbrick image through PM. I used wind32diskimager to put the image on SD card, popped it in my note 4.
(The phone had been setting on my dresser for 6 weeks or so dead). after putting the sd card in I remembered reading that the battery needed to be at least 10% so I plugged the usb cable into my pc And BAM! it powered right into USB mode.
So then I wasn't sure if I needed to flash with Odin or anything. Anyway I plugged it into the wall charger and pressed the power button and the phone rebooted and come right on like normal boot. So I went to bed and let it charge over night.
Got up this morning opened it and set up my Google account and everything was running like normal. So I powered the phone down.
Now it is doing the same freaking thing, No Power, no lights, no vibration.
The only thing I can get it to do is while holding the power and Volume down key, plug into pc and pops up QHSUSB_BULK.
I'm so frustrated with this POS! What am I doing Wrong?:crying:
BTW here is the unbrick image download https://www.dropbox.com/s/4vye9t9178vr1k9/N4_UNBRICK.zip?dl=0
Nissmo33 said:
!!Update!!
ryanbg sent me the unbrick image through PM. I used wind32diskimager to put the image on SD card, popped it in my note 4.
(The phone had been setting on my dresser for 6 weeks or so dead). after putting the sd card in I remembered reading that the battery needed to be at least 10% so I plugged the usb cable into my pc And BAM! it powered right into USB mode.
So then I wasn't sure if I needed to flash with Odin or anything. Anyway I plugged it into the wall charger and pressed the power button and the phone rebooted and come right on like normal boot. So I went to bed and let it charge over night.
Got up this morning opened it and set up my Google account and everything was running like normal. So I powered the phone down.
Now it is doing the same freaking thing, No Power, no lights, no vibration.
The only thing I can get it to do is while holding the power and Volume down key, plug into pc and pops up QHSUSB_BULK.
I'm so frustrated with this POS! What am I doing Wrong?:crying:
BTW here is the unbrick image download https://www.dropbox.com/s/4vye9t9178vr1k9/N4_UNBRICK.zip?dl=0
Click to expand...
Click to collapse
Did you take the SD card out?
Yes I did.
Update #2 after the phone sits until the battery drains.
It will come back on after plugging it into a charger.
Now it's back like when I bought it. Randomly turns off and freezes and sometimes won't power up.
Sent from my SM-G900V using Tapatalk