Related
So I know there are a few other threads but I could not quite figure out who in the US has actually got the update and it seems most of the ones I see and look are outside the US and the ones saying they have not got it are in the US. Is there confirmation that people in the US are getting the update? I have tried the reset trick uninstalling android wear and moto connect and clearing Bluetooth but I have had no luck and I see others freaking out about it so I thought if we had a more clear answers Who and where they live that got that update? I know some have said on the wear roll outs it seems to not matter the region but it seems to or at least for US and Non US.
I guess the option "Did not get the 5.0.1 update, do not live in the US" was left out?
I guess I should have added it and i tried to delete the thread to add it. I was making a US thread because I had seen others for other areas so I guess I just didn't think to put it. my bad.
I got the update on Thursday during the day. I am in Florida, bought the watch from Best Buy. I did not need to reset the watch to see the update, but I did upgrade the Android Wear app to the latest version.
I live in AZ and am still anxiously awaiting to see the update. I did get the Android Wear update, but nothing for the watch .
I live in the Boston Mass area and i got the update on like Tuesday.
my real passion is to hack this baby up but i was having a b1tch of a time getting my usb interface i built to work.
Los Angeles, CA
got both the same day on thursday. did not even know there were updates as i dont keep up with these forums. i DID come here once I saw the update to see what it was about....
Well maybe they are doing big cities and moving there way in Ugh I wish they would just get to it or I could get this thing to mount via USB I have never had so much trouble with a cord.
New Jersey, update for android wear on Thursday - No update for my watch yet.
I don't think it has anything to do with cities. It's all about your Google account and what position it's in to receive the update. I'm in Pasadena (literally right next to Los Angeles) and i have yet to receive an update. This is without resetting the watch, or doing any other ridiculous tricks just to get it.
freeza said:
I don't think it has anything to do with cities. It's all about your Google account and what position it's in to receive the update. I'm in Pasadena (literally right next to Los Angeles) and i have yet to receive an update. This is without resetting the watch, or doing any other ridiculous tricks just to get it.
Click to expand...
Click to collapse
Im in Fall River,MA and i am still waiting for the update. I do have the updated Android Wear app. My girls G watch recieved the update yesterday. and i have reset this mother like fifteen times since my girl got hers, lmao
I got it but I had to force it.
Try this, it has worked for 3 other people.
1: Make sure your Google Play Services and Android Wear apps are updated to the latest versions using apkmirror.com (NOT the play store)
2: Remove BT pairing, "Forget device" from within the Wear app, wipe Wear apps data
3: Reset the watch
4: once booted and paired immediately go to settings/update and check for it. Within the first 3 times it should download it.
Again its not completely proven, but I've seen it work 3 times before including myself.
altimax98 said:
I got it but I had to force it.
Try this, it has worked for 3 other people.
1: Make sure your Google Play Services and Android Wear apps are updated to the latest versions using apkmirror.com (NOT the play store)
2: Remove BT pairing, "Forget device" from within the Wear app, wipe Wear apps data
3: Reset the watch
4: once booted and paired immediately go to settings/update and check for it. Within the first 3 times it should download it.
Again its not completely proven, but I've seen it work 3 times before including myself.
Click to expand...
Click to collapse
Did this. No luck.
gtg465x said:
Did this. No luck.
Click to expand...
Click to collapse
Clear data from Android wear and Moto connect. Uninstall both apps. Reset Moto 360. Install wear and connect. Pair watch. Check update and should get it.
That's what I did. I'm in Orlando, Florida. Have had the update for about 3days
altimax98 said:
I got it but I had to force it.
Try this, it has worked for 3 other people.
1: Make sure your Google Play Services and Android Wear apps are updated to the latest versions using apkmirror.com (NOT the play store)
2: Remove BT pairing, "Forget device" from within the Wear app, wipe Wear apps data
3: Reset the watch
4: once booted and paired immediately go to settings/update and check for it. Within the first 3 times it should download it.
Again its not completely proven, but I've seen it work 3 times before including myself.
Click to expand...
Click to collapse
I did it 4 times. Didn't work.
I think I'm done with the tricks.
I am not from USA (I live in EU), but i bought my watch in USA and recieved update on Thursday.
Sent from my SM-910c using Tapatalk
I tried the tricks too with no luck. I don't care anymore I'll get it when I get it.
Qbancelli said:
I did it 4 times. Didn't work.
I think I'm done with the tricks.
Click to expand...
Click to collapse
I did it like 40+ times with no luck so I made a usb cord to mount the watch and forced the update via shell side loading
tlxxxsracer said:
Clear data from Android wear and Moto connect. Uninstall both apps. Reset Moto 360. Install wear and connect. Pair watch. Check update and should get it.
That's what I did. I'm in Orlando, Florida. Have had the update for about 3days
Click to expand...
Click to collapse
Like I said before, I did all of that. Twice. Didn't get the update. It still requires some luck apparently.
Since i upgraded my s7 to Nougat, my Smartwatch 3 has failed to stay connected to the phone. Most of the time it refuses to connect at all.
Ive googled for days now, trying all of the usual stuff including clearing the bluetooth cache and wiping the system cache, unpairing the watch, safe mode, forgetting the watch and repairing, removing android wear.
The setup starts working and then during the sync stage, i start getting the bluetooth share has failed message several times although most apps seem to sync eg watchmaker pro and strava.
My question is should the Smartwatch 3 still work correctly with my phone even though the phone is on Android 7.0 and the phone is on 6.0?
Thanks
Andy
My SW3 works great with my HTC 10 running Nougat.
Have you tried doing a factory reset on the watch?
That was going to be my last resort!
Think I may be there though
Thanks,
Andy
Just completed a full reset. Paired first time but crashed several times with bluetooth share has failed.
Failed to complete and no longer connects
I'm also on 7.0 and no problem at all. Maybe is something wrong with your BT from S7, unfortunately I have to tell you to try try factory on the phone, if you can't find out. Samsung for me have strange way of using there BT connections maybe this is why.
Hope I'm not starting any flame but.... that's why I'm on HTC (and not only), Samsung (S4 and S5) phone several times have blocked my car BT system...
Sent from my HTC 10 using Tapatalk
Thanks for the feedback. I have done a factory reset and it made no difference, but maybe it is a Samsung issue as nobody with an S7 has indicated they are using an SW3 with nougat.
burleanu said:
I'm also on 7.0 and no problem at all. Maybe is something wrong with your BT from S7, unfortunately I have to tell you to try try factory on the phone, if you can't find out. Samsung for me have strange way of using there BT connections maybe this is why.
Hope I'm not starting any flame but.... that's why I'm on HTC (and not only), Samsung (S4 and S5) phone several times have blocked my car BT system...
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
I'm having same issues. Updated S7 edge to Nougat last week and everything running fine until SW3 ceased connecting today. Tried everything other than factory reset on phone and cannot get connection to SW3.
Mine has started working after a month of failing.
It's been connected for a couple of days without any disconnections.
The latest attempt was no different to any others.....
I switched off the watch, wiped the system cache, restarted the phone and watch and lt connected.
I left it alone as apps started to sync and there were some bluetooth share has stopped messages but everything works!
try this:
https://forum.xda-developers.com/pixel-xl/help/bluetooth-off-t3572982
andyshandyman said:
Since i upgraded my s7 to Nougat, my Smartwatch 3 has failed to stay connected to the phone. Most of the time it refuses to connect at all.
Ive googled for days now, trying all of the usual stuff including clearing the bluetooth cache and wiping the system cache, unpairing the watch, safe mode, forgetting the watch and repairing, removing android wear.
The setup starts working and then during the sync stage, i start getting the bluetooth share has failed message several times although most apps seem to sync eg watchmaker pro and strava.
My question is should the Smartwatch 3 still work correctly with my phone even though the phone is on Android 7.0 and the phone is on 6.0?
Thanks
Andy
Click to expand...
Click to collapse
If you use in the phone the option "deep kill all apps" in recen menus... you will have sync problem... It happend me with my op3...
I have similar problem with my S7. It works fine with bt connection as long as i connect the watch over wifi. Then no more bt connection is established, only wifi. Turning off wifi makes the watch permanently offline.
Very annoying as my watch can't sync when outside my wifi range.
Any solution so far?
I had my Huawei watch 1 working with Android Wear 2 on my iPhone 7+ working for several months with iOS10. However, as soon as I upgrade to iOS 11 I realised that my Huawei Watch was not connected to my iPhone but still connected to and working on my wifi. Having tried unsuccessfully many times to pair the watch and phone I decided to reset the watch and reinstall AW2. BIG MISTAKE.
Although I reset ok and AW2 asking me if I want to pair with my watch, every time pairing fails. I have gone to Blue tooth and told it to forget the Huawei watch, which it does and I then start again. However after more than 20 unsuccessful attempts, I conclude that there is an issue between iOS11 and the watch & AW2. The Watch now will only function in settings and is now useless, unless and until the three separate organisations get their act together and resolve the conflict.
Any thoughts or suggestions or experience to share before I buy a new (Apple?) watch
Similar
Hi, I am also having trouble, but it is getting better. I don't think ios 11 is the problem as I was running my Huawei with aw 2.0 on my iPhone 6 after updating to 11. Everything was as it was on ios 10. Then, a few days later I got the iPhone 8 plus and everything fell apart. The BT connection has been very unreliable. I could actually watch the connection rapidly connect and then disconnect over and over on the AW app and my phone settings. I also lost Google Assistant and the Play Store. Today has been much better. BT connection stable all day and GA is back, but I still can't connect to the Play Store. Have you found any answers?
Factory reset helped me.
Same thing here, updated to iOS 11 and it was working, but after a day it got disconnected and never re-connected, trying a factory reset did nothing, could not reconnect.
Same with me. I thought it was working after I've updated the IOS to 11, but after a day, my watch refuse to connect to the IPhone7. Watch's Bluetooth kept on toggling off automatically.
Can anyone confirm the Factory Reset (watch) solve the problem?
boss_y said:
Factory reset helped me.
Click to expand...
Click to collapse
Yep, can’t connect anymore...
Sent from my iPhone using Tapatalk
---------- Post added at 03:37 PM ---------- Previous post was at 03:36 PM ----------
tamaamd64 said:
Same with me. I thought it was working after I've updated the IOS to 11, but after a day, my watch refuse to connect to the IPhone7. Watch's Bluetooth kept on toggling off automatically.
Can anyone confirm the Factory Reset (watch) solve the problem?
Click to expand...
Click to collapse
No!
Sent from my iPhone using Tapatalk
Same problem. Dying to get the solution... For now, I am trying to downgrade my iphone to 10.3.3
If I watch Bluetooth settings it’s getting connected but after 30 seconds it gets disconnected and on and on...
Sent from my iPhone using Tapatalk
——————
I can confirm it’s working after manually turning off and then on wifi and Bluetooth in Iphone settings. If you do it in control centre it won’t work. Only manually in settings! Hope it helps anyone...
Sent from my iPhone using Tapatalk
I've had the same issue as you guys. It worked on the IPhone8 for a couple hours then disconnected. I couldn't even get it to pair after that. I spent a couple hours at an apple genius bar today. While there ios 11.0.1 dropped. I installed and could pair my phone to the watch but it quickly started having issues. It was constantly connecting and disconnecting. They asked if they could have my phone to send in and have the logs checked. I agreed and they gave me a new phone. Hopefully this helps them fix the issue in a future update.
I'm having the same issue with a Fossil Q Founder 2.0, so this seems to be a larger iOS 11 / Android Wear compatibility problem and not hardware-specific. It was working fine on iOS 10, but as soon as I upgraded to 11, the watch was having issues staying connected (which in turn drained the watch battery very quickly). I had the same idea as above, and tried factory resetting the watch - now I can't get it to connect at all.
I signed up for a beta software profile on the iPhone. I received ios 11.1 beta today and immediately installed. My watch is presently paired and receiving updates ?
Edit: It only stayed connected for ~half hour. I just submitted a detailed report to Apple through their feedback app.
My theory is that iOS is killing/hibernating/sleeping the Android Wear app after some time in the background.
What I'm doing:
- review the connectivity from time to time
- if it is not working:
, manually kill the Android Wear app, open it again and, from the card in the watch, start the resync process.
Some extra information: Moto 360 2nd gen + iPhone 6 with iOS 11.0.1
In addition to this, the application on the iPhone is constantly active in the background and will kill the battery in a few hours.
ip 7 plus + huawei watch 2
I have a Nixon Mission and after upgrade to iOS 11.0 (iPhone7) I have also lost connection. I did a factory reset that worked for about half an hour... I also tried with iOS 11.0.1 and the **** is the same.
ggirao said:
I have a Nixon Mission and after upgrade to iOS 11.0 (iPhone7) I have also lost connection. I did a factory reset that worked for about half an hour... I also tried with iOS 11.0.1 and the **** is the same.
Click to expand...
Click to collapse
Same here. Reset watch and now can't connect at all. Interestingly it doesn't show up as a device in Bluetooth settings to forget
And another one here. I haven't tried a factory reset, just in case I can't reconnect. But nothing I do seems to fix the problem. After the iOS11 upgrade my watch was initially connecting ok, but now it won't. I've rebooted both devices, toggled airplane mode, wifi, bluetooth, killed Android Wear app (iOS), etc. Nothing seems to work.
Well guys I sold my Huawei watch and got a series 3 Apple watch. All I can say is watch os4 is miles ahead of Android wear 2.0. I've been on Android since the inception of the smartphone. This is my first iPhone and I'm learning to really love it. Android is in the same ballpark in the phone arena. As for the watch department, android is not even in the same universe. Android does offer way better selection and style, but software pffft. I hope Apple fixes the issue quickly for you guys. I've gave them lots of information and logs through their beta program, hopefully it helps. RIP Huawei watch ?
Hi!!! had the same problem.. i put my phone on airplane mode a couple of seconds.. (to get wifi and bluetooth off) and the disabled airplane mode... and instantly reconnected to my huawei watch,
Hope this helps.
Anyone figured this out yet??
I have an iPhone 6s and running iOS 11.1 beta 2. I did a factory reset on the watch and the setup screen would show the watch but when I select it, it says cannot pair. I cannot connect to it at all! This happened when I was on the stable release of iOS 11 too just in case you are going to say it’s brcause I’m using a beta version of iOS. Thanks in advance!!
With latest firmware and lates android wear update everything works as it should. Cheers b.
Sent from my iPhone using Tapatalk
My GT is running on 1.0.7.12B and the newer version 1.0.7.36 I have received OTA through the Huawei Health app.
I have updated my watch serveral times, the watch updates & restarts itself as if the newer version has installed but the system shows the older version only.
The huawei health app still asks me to upgrade to 1.0.7.36 whereas I have upgraded nearly 6-7 times already.
I have factory reset my watch several times. Re-installed the health app too but the issue still remains same.
Has anyone else also faced the same issue?
Use Android WearOs app. Huawei's app is literally bull****. Also use Google Fit App.
Huawei only has bad apps
Since a few updates ago, text messages notifications no longer show up the car screen, although they are downloaded. Phone calls work fine. My s9plus works fine, not the s9. Tried updating with Samfirm, didn't help. Would a factory reset work, or downgrading to when it worked several months ago. Toyota and tmobile hasn't help. Is there a setting I am missing?
mrdunn said:
Since a few updates ago, text messages notifications no longer show up the car screen, although they are downloaded. Phone calls work fine. My s9plus works fine, not the s9. Tried updating with Samfirm, didn't help. Would a factory reset work, or downgrading to when it worked several months ago. Toyota and tmobile hasn't help. Is there a setting I am missing?
Click to expand...
Click to collapse
im betting that they havent helped because it was intentional and theyre all instructed to keep tight lipped about it. That is the way that industries have been for quite a long time when a feature was offered at one point then govm't restrictions had since disallowed that feature from being offered. You can certainly try to roll your OS back with very little trouble using Odin so long as the bootloader revision hasnt changed.