Develop Bugs

[Q] Am I bricked?

Please help! I am new to this and am worried I bricked my phone.
I successfully rooted my Verizon Samsung Galaxy Nexus using a toolkit. It was then working fine with 4.2.2. I wanted to install Shiny Rom 4.4.2. I thought I successfully backed up apps and data using Titanium Backup.
I successfully moved the correct zip files to my phone, and realized I needed Clockworkmod recovery. I followed a procedure to get this on my phone by using my computer's command prompt. I successfully booted into Clockworkmod recovery and followed the process of wiping data/factory reset, successfully installed radio and bootloader recommended to install with ShinyROM but got stuck and could not install the ShinyROM itself. I think it is because it requires a later version of Clockworkmod. The one I downloaded using the procedure was 5.5.0.4, but I think I need a later version. I tried following the same procedure using my computer's command prompt and it got stuck at "waiting for device". I cannot get out of Clockworkmod recovery now (even battery pull, etc.). I then found some threads saying I need to restore my old ROM first. (I think) the only ROM on my phone is ShinyROM. I am stuck and stressed out because I do not know of a way of "pushing" the new version of Clockworkmod to my phone.
Can I fix this, or do I need to start shopping?

[email protected] said:
Please help! I am new to this and am worried I bricked my phone.
Can I fix this, or do I need to start shopping?
Click to expand...
Click to collapse
i think u already wiped data partition at first, that why your Rom installation aborted bcoz recovery cant mount any partition.
still got your old system partition here.
from recovery ~ try adb sideload your shinyRom. can your pc detected bootloader (fastboot)/recovery?

memaro_maro said:
i think u already wiped data partition at first, that why your Rom installation aborted bcoz recovery cant mount any partition.
still got your old system partition here.
from recovery ~ try adb sideload your shinyRom. can your pc detected bootloader (fastboot)/recovery?
Click to expand...
Click to collapse
Regarding partition, I have an option to wipe cache partition. Should I do this?
Update
Well, I went ahead and tried this, and still could not install ShinyROM.
I tried to follow a procedure in the link to use ADB sideload.
I downloaded (full) SDK and updates and updated the drivers. When I get to the following steps from the procedure...
-Boot your device in recovery mode (Android logo with a exclamation mark) and connect your device to PC
-Hold down "power" button first, followed quickly by "volume up" button. You should now see the recovery menu
I only boot to CWM and there is no Android with Exclamation mark. Holding down power button only selects whichever option is highlighted within CWM.
Also, it seems within CWM, there is supposed to be an option to sideload a zip file. This option does not exist in my version of CWM.

[email protected] said:
Regarding partition, I have an option to wipe cache partition. Should I do this?
Update
Well, I went ahead and tried this, and still could not install ShinyROM.
I tried to follow a procedure in the link to use ADB sideload.
I downloaded (full) SDK and updates and updated the drivers. When I get to the following steps from the procedure...
-Boot your device in recovery mode (Android logo with a exclamation mark) and connect your device to PC
-Hold down "power" button first, followed quickly by "volume up" button. You should now see the recovery menu
I only boot to CWM and there is no Android with Exclamation mark. Holding down power button only selects whichever option is highlighted within CWM.
Also, it seems within CWM, there is supposed to be an option to sideload a zip file. This option does not exist in my version of CWM.
Click to expand...
Click to collapse
set up fastboot and flash twrp then.

xzilem said:
set up fastboot and flash twrp then.
Click to expand...
Click to collapse
Thanks. I found another thread that led me to the same conclusion, except I was able to do it with CWM and fastboot the latest version using ADB sideload. I still haven't posted enough to link, but here were the details from user camblue.
"
If you know how to use ADB you can always fastboot a recovery.img,,,,this thing is almost impossible to truly brick. IN order to get into fastboot just connect to your computer and run adb with these commands
adb reboot bootloader
once in fastboot mode write this
fastboot devices
that will tell you if your device is connected and reading in fastboot mode if it is you will see something like fastboot and some numbers next to it. If nothing you do not" have the fastboot drivers installed.
then to fastboot flash a recovery.img write this
fastboot flash recovery r3-recovery-clockwork-touch-6.0.0.4-nexus7-modaco.img (or whatever recovery.img you are using or have in your tools folder of you SDK location).
and in order to get right into CWM if you cant boot write this
fastboot boot r3-recovery-clockwork-touch-6.0.0.4-nexus7-modaco.img
hope that helps
"

[Q] Re-installing Stock ROM on xiaomi Redmi 1s

Hello,
I insatlled CWM recovery mode and flashed the phone with cynogenmod 11 with 4.4.4. It was working very good. Then I thought of re-flashing the device to Stock MIUI ROM. As it was giving error in sdcard mount, I installed the ROM with sideload. After completion, it stuck at the splash screen. I still can boot in Recovery mode, but not CWM recovery mode, it MI Recovery Mode. How can I make this phoe working again. What can I do ? Which software can be used to do a recovery from system. Any links softwares are present?
Help me please.... I am stuck here....

Well for beginning, you have to first think of you made a backup or not, if yes then no issues, if not then you need to flash the rom again.
Ok so, boot into fastboot by holding the vol- and power button, make sure your pc has fastboot drivers installed (google for fastboot drivers) then download the twrp recovery image and put the files in the same directory as fastboot driver.
After you have completed this pm back i will tell you next steps.

saheb11123 said:
Well for beginning, you have to first think of you made a backup or not, if yes then no issues, if not then you need to flash the rom again.
Ok so, boot into fastboot by holding the vol- and power button, make sure your pc has fastboot drivers installed (google for fastboot drivers) then download the twrp recovery image and put the files in the same directory as fastboot driver.
After you have completed this pm back i will tell you next steps.
Click to expand...
Click to collapse
--------------------
I just cleared the cache and data partition and restarted the phone. It started working. How can I know more about the different partitions and its usability as per Android OS. What keyword I use to search on Google or if you can provide any link...
Thanks for help.

Very simple, you can search google : "How to use MI Flash." It is a tool which is used for flash rom via fastboot with all Xiaomi Device.
There are 2 ways for installing stock rom : via recovery or via fastboot. You need down stock rom (for fastboot), then extract and using Mi Flash browse to folder u extracted

^^that was not what he asked.
Google for android system partitions info or info specific to redmi1s ...

NO RPMB (how to install TWRP, a new ROM and using Magisk)

Hello, I have sent my phone to warranty and after that I received a phone with NO RPMB and after many frustrations I found (with help of many users and forums) how to workaround this..
To start:
Download boot image from here
Download twrp from the official website
Change the name to boot.img and twrp.img and put it in the platform-tools folder
Open the terminal there
Download your favourite rom
Enter fastboot mode on your phone
!!!!After this you will loose all of your data!!!!
Paste this to the terminal
fastboot oem unlock
(select yes on your phone)
fastboot flash boot boot.img
fastboot flash recovery twrp.img
fastboot format userdata
fastboot format cache
Reboot to recovery (if it doesn't enter at the first time enter download mode again and restart to recovery)
After that you have twrp and can flash every rom.. yay!!!
Wipe everything.
Copy the rom zip to your phone using MTP
Install your fancy new rom
If you want to install magisk:
Install the magisk manager.
On the app select install and select patch image file. (it will create a new boot image already patched)
After that install the new image (patched_boot.img) using twrp
Do a clean instalation of your ROM (recomended) or a Factory Reset first
Reboot to twrp
Select install
Click in install image
Select patched_boot.img
Select install to boot partition
Reboot.
Install magisk manager and do the sugested setup.
You now have magisk working
Thanks to all the users that helped me!!

I had real trouble getting twrp to work the last time I tried this a few months ago. Followed the steps here and am now on pixel experience with magisk. Thanks!

Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.

sigibian said:
Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.
Click to expand...
Click to collapse
My bootloader is still unlocked after following this guide
For Magisk:
-Install your custom ROM and boot it up (without root)
-Then extract the boot.img from the ROM zip file and save it on your phone storage.
-Install the Magisk manager apk
-In Magisk manager, select install Magisk> choose the patch boot image option and -Select the boot.img you previously saved.
Once it's done, reboot into twrp and flash the patched boot.img. When you reboot Magisk will be working.
I've had no issues with my bootloader, even after an ota update for pixel experience.

Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656

sigibian said:
Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656
Click to expand...
Click to collapse
The official twrp works for fine for me, haven't tried the 4 core version but it can't hurt to try if you need it.
Power off your phone then press and hold volume - and power to enter bootloader, then connect to your pc and follow the steps in the OP

So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache

sigibian said:
So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache
Click to expand...
Click to collapse
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.

baddesthad said:
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.
Click to expand...
Click to collapse
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.

sigibian said:
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.
Click to expand...
Click to collapse
You need to use vol- and power to go into fastboot mode then connect to the pc. As for userdata and cache, if you don't clean them when coming from stock you will have issues (your data will be encrypted if you're on stock?). As I said this guide worked for me. The op was talking about fastboot mode in the 6th option (also there is much more information in the thread I linked above)

sorry for the confusing i wanted to say fastboot mode..
i knew the thread that you are saying but most people doesn't want to search so I made a little thread only with the needed parts..
I use it myself so I have a place to remember all the steps when I need to change the rom to a new one or when I make experiments and brick my phone XD

If anyone know anything else that should be in here just say, I really want to improve the post

Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?

fhartane said:
Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?
Click to expand...
Click to collapse
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not

PedroM.CostaAndrade said:
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not
Click to expand...
Click to collapse
Thanks for the answer. You mean that now I have twrp, I can flash custom Roms with my bootloader locked without any issue?
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk

Yes if you have TWRP you can install custom ROMs, custom Kernel's, magisk, super su, etc..
the locked bootloader only prevents you from using fastboot commands like the one needed for installing custom recovery
Now that you have TWRP you can use it for everything

Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?

Fabiojoker said:
Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?
Click to expand...
Click to collapse
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC

Hello, thank you for your information, since I haven't done modding on phones for a long time, I didn't remember exactly the procedure with fastboot and therefore I didn't understand where I had to put the files, but in the end I did it.
Thank you
PedroM.CostaAndrade said:
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC
Click to expand...
Click to collapse

Why is a custom boot image needed? I don't want to root.

No OS is installed. Moreover recovery cannot be accessed. Nor can flash it via adb.

Previously I was using Ressurection Remix treble rom which is based on android 9 pie. I went to TWRP and wiped the OS. Then I tried to install a new rom called Dot OS. But it showed error 7. So I flashed Vendortofactory zip within twrp and without rebooting again into TWRP I flashed a new TWRP image within TWRP by selecting Recovery mode. After that I cant boot into TWRP and as already my OS is gone I also cannot boot into any system. Moreover my device is not getting detected in my PC. I cannot install TWRP by writing commands in cmd, while the phone is in fastboot mode as the device is not getting detected in my pc. Really it is urgent. I will be glad if someone helps me. Thanks in advance.

What is the present booted state of your device? Are you in twrp, or bootloader. Most of the time you can keep on pressing the power button. When it boots into a message about unlocked bootloader, press volume button to select recovery and it will boot into twrp

You should be able to boot in fastboot mode without recovery nor os, maybe your drivers are not working on windows? Try different usb ports, check if the display says "bootloader" or something. If nothing works try the usb shunt, this device is literally 'unbrickable' if it's working properly.

Watch this video(https://www.youtube.com/watch?v=DexLELi04XY) and then you will be able to detect your phone in your pc in qcom 9008 mode , then use qfil to flash ZUI firmware ,there are plenty of tutorials on the internet for that ,then follow the proper procedure mentioned in DotOs thread for flashing the new rom .
Hope it helped .

If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method

yashpatel1221 said:
If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method
Click to expand...
Click to collapse
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.

sanjay.2704 said:
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.
Click to expand...
Click to collapse
I don't understand what you are talking about as i say i am not some kind of technical expert i am here help regarding this i faced similar situation where i am not able to enter into recovery and also not able to enter into the os and when i restart the phone it automatically boot into fast boot mode what ever option i select and i solved my problem by this method

Problem with Fastboot reboot and Can't install new firmware

Hello guys, i have a mi 10t pro, today try after unlock devices 7 days to flashed and downgrade because my battery drain is significative, i had 12.5.1 eea firmware and try to downgrade to 12.0.19, but now phone is in continus reboot in to fastboot, i try to flash with last miflash tool, but after 2sec is tell me that firmware upgrade is complete and now i can't start my smartphone. i can try to flash last rom fastboot 12.5.1 but without result. How i can resolve this problem? thanks in advance

When trying to do any major change like a downgrade, you must factory reset. MiFlash should have done that for you, but I guess there's a chance it didn't.
To do a factory reset from Fastboot you can use a compatible version of TWRP and just boot into it (not installing it).
Eg. fastboot boot TWRP_apollo_3.5.0_10-beta_1_whyle.img
From within TWRP you can then do a factory reset and see if it'll boot.
If it still boots into fastboot then you have the option of an alternative ROM. Xiaomi.eu provides a debloated version of the Chinese MIUI ROM. I'm running its latest 12.6 version and it has no problems with battery drain. https://xiaomi.eu/community/threads/21-6-23.61942/

chisnz said:
When trying to do any major change like a downgrade, you must factory reset. MiFlash should have done that for you, but I guess there's a chance it didn't.
To do a factory reset from Fastboot you can use a compatible version of TWRP and just boot into it (not installing it).
Eg. fastboot boot TWRP_apollo_3.5.0_10-beta_1_whyle.img
From within TWRP you can then do a factory reset and see if it'll boot.
If it still boots into fastboot then you have the option of an alternative ROM. Xiaomi.eu provides a debloated version of the Chinese MIUI ROM. I'm running its latest 12.6 version and it has no problems with battery drain. https://xiaomi.eu/community/threads/21-6-23.61942/
Click to expand...
Click to collapse
Thanks i can try any solution. i install trought cmd fastboot comand twrp image file and after try to reset it? help me if you have other solution to I was hoping there was a way to bring it back to a stock firmware or a recovery firmware. I tried to flash all.bat inside firmware 12.5.1 my last firmware, proceeded it's fine and complete but after install my phone reboot continuos after logo. as if it didn't have a firmware installed.
P.s. Explain to me the procedure to start twrp without installing it step by step. Thanks so much ^^

To use TWRP to factory reset, first find a compatible TWRP. I used the latest version from:
https://forum.xda-developers.com/t/...r-mi-10t-mi-10t-pro-redmi-k30s-ultra.4187427/
which was TWRP_apollo_3.5.0_10-beta_1_whyle.img
Boot into download mode
Then type this exactly (or change to a different file name if you're using a different version of TWRP):
fastboot boot TWRP_apollo_3.5.0_10-beta_1_whyle.img
Once TWRP starts up, go into Advanced, Wipe.
Tick
- data
- cache
- dalvik (dalvik cache)
and select to wipe it.
Reboot system.
That should leave you with no account set up and enable you to boot and setup from scratch in most cases.

chisnz said:
To use TWRP to factory reset, first find a compatible TWRP. I used the latest version from:
https://forum.xda-developers.com/t/...r-mi-10t-mi-10t-pro-redmi-k30s-ultra.4187427/
which was TWRP_apollo_3.5.0_10-beta_1_whyle.img
Boot into download mode
Then type this exactly (or change to a different file name if you're using a different version of TWRP):
fastboot boot TWRP_apollo_3.5.0_10-beta_1_whyle.img
Once TWRP starts up, go into Advanced, Wipe.
Tick
- data
- cache
- dalvik (dalvik cache)
and select to wipe it.
Reboot system.
That should leave you with no account set up and enable you to boot and setup from scratch in most cases.
Click to expand...
Click to collapse
ok it's fine i have enter in twrp now and format data + cache + dalvik, But now reboot in fastboot mode and it always starts in fastboot continuos. how should i proceed now to install a basic firmware and be able to start the mi 10t pro eea?

i want to try to install with twrp, what rom i need? fastboot rom tgz or full rom .zip from mi.com site? thanks

update Mi-flash. There's 2021 version.
Code:
fastboot reboot bootloader
disconnect USB cable and reconnect it again
flash again with Mi-flash, do not lock it.
Fastboot ROMs are more than 3GB.

pl1992aw said:
update Mi-flash. There's 2021 version.
Code:
fastboot reboot bootloader
disconnect USB cable and reconnect it again
flash again with Mi-flash, do not lock it.
Fastboot ROMs are more than 3GB.
Click to expand...
Click to collapse
hELLO PL1992, i have use now MiFlash20210226 version installed for 1sec and nothing is installed, the mobile is in fastboot but I can't figure out how to complete the flash of the fastboot rom. I am using the latest EEA fastboot rom for my device, I have tried several versions even earlier but nothing. he says he has completed the procedure but in 1 sec he does absolutely nothing. Do you have solution ideas to try? alternatives to miflash? I also tried to install by extracting the Fastboot rom from inside the rom with flash all.bat, the procedure always go well, but the phone keeps restarting after the MIUI logo every 2sec. I have windows 10 pro i don't know if it is the problem

fantidus90 said:
hELLO PL1992, i have use now MiFlash20210226 version installed for 1sec and nothing is installed, the mobile is in fastboot but I can't figure out how to complete the flash of the fastboot rom. I am using the latest EEA fastboot rom for my device, I have tried several versions even earlier but nothing. he says he has completed the procedure but in 1 sec he does absolutely nothing. Do you have solution ideas to try? alternatives to miflash? I also tried to install by extracting the Fastboot rom from inside the rom with flash all.bat, the procedure always go well, but the phone keeps restarting after the MIUI logo every 2sec.
Click to expand...
Click to collapse
Did you execute the code given to you before you flash it?
In Mi-flash, click Driver, then install.
After it's done, reboot your PC.
Then do the
Code:
fastboot reboot bootloader
command.
The flashing process should be more than 500 seconds if it's done correctly.
The fastboot ROM should be extracted, not using directly the tgz file.
Rename the extracted folder name short, like "1", and put in C:/ drive.

pl1992aw said:
Did you execute the code given to you before you flash it?
In Mi-flash, click Driver, then install.
After it's done, reboot your PC.
The flashing process should be more than 500 seconds if it's done correctly.
The fastboot ROM should be extracted, not using directly the tgz file.
Rename the extracted folder name short, like "1", and put in C:/ drive.
Click to expand...
Click to collapse
I followed your advice but nothing has changed. i have make a screen, i create in C:/miui/1/all extracted rom .tgz, but flashed for 5sec and completed process =/

fantidus90 said:
I followed your advice but nothing has changed
Click to expand...
Click to collapse
Run command:
Code:
fastboot reboot bootloader
Phone will reboot to fastboot.
Change a USB port.
Do not use USB hub.
If you are using desktop PC, connect it to the motherboard USB port.

fantidus90 said:
I followed your advice but nothing has changed. i have make a screen, i create in C:/miui/1/all extracted rom .tgz, but flashed for 5sec and completed process =/
Click to expand...
Click to collapse
Click the log to see what it done.
If you think this is bothersome, then do the TWRP way you want to.
For TWRP way, you flash the recovery version zip.

pl1992aw said:
Click the log to see what it done.
If you think this is bothersome, then do the TWRP way you want to.
For TWRP way, you flash the recovery version zip.
Click to expand...
Click to collapse
i have 3 report in log. posted here the file. thanks for help bro. Hope that you can find my problem and i can use my new xiaomi again.

fantidus90 said:
i have 3 report in log. posted here the file. thanks for help bro. Hope that you can find my problem and i can use my new xiaomi again.
Click to expand...
Click to collapse
Code:
echo Missmatching image and device
It seems the ROM and your device is not matching, so it don't flash.
First confirm what your phone model is. The model should be written on the box came with the phone.
Install this program:
XiaomiADBFastbootTools (Java)
https://github.com/Szaki/XiaomiADBFastbootTools
It will need java SE, follow the FAQ guide in that github to use the program.
It should show you what phone you have.
Like this

fantidus90 said:
i have 3 report in log. posted here the file. thanks for help bro. Hope that you can find my problem and i can use my new xiaomi again.
Click to expand...
Click to collapse
Hi there, probably found the answer. It can be because of your PC CPU.
Read here:
https://forum.xda-developers.com/t/3638653/post-82085077
If you are very sure your phone is apollo, then you can do similar to this one and try again:
https://forum.xda-developers.com/t/3638653/post-73105436
Do not lock bootloader

pl1992aw said:
Hi there, probably found the answer. It can be because of your PC CPU.
Read here:
https://forum.xda-developers.com/t/3638653/post-82085077
If you are very sure your phone is apollo, then you can do similar to this one and try again:
https://forum.xda-developers.com/t/3638653/post-73105436
Do not lock bootloader
Click to expand...
Click to collapse
I have resolve thanks pl1992, i want to share my solution. Use Twrp to boot with fastboot boot twrp name.img command. After i copy recovery firmware .zip on my usb stick/type C connection and i connect directly on my mi 10t pro type c, not read first time in ntfs system, after i format with fat32 and recopy recovery firmware .zip and install throught TWRP. ALL is Ok now. Thank you