Related
Hi I tried to OTA on my D802. It downloaded the latest update file, rebooted to TWRP, then I had to manually instlal the update and since I did it it bootloops to TWRP.
So I wiped all data, system .. everything and via USB-OTG flashed clean OS and gapps. Anyway Im not able to boot to OS even I press BOOT TO SYSTEM in TWRP.
I updated TWRP to the latest 3.0.3-a (originally I had 3.0.2-1.
I cant boot to OS and my D802 is useless. anay help ???
thank you
Petr
Manually like fastboot? Are you sure you did not flash TWRP to boot instead of recovery?
Sent from my Nexus 6 using Tapatalk
My D802 downloaded new nightly build and rebooted to TWRP and nothing happened. So I install the new nightly manually in TWRP.
Since I did it it reboots only to TWRP.
Tried to wipe all in my phone including internal storage etc. and installed new fresh Lienage (tried more nightly)
I even tried to install it from fastboot and it boots only to TWRP itself even I use BOOT TO SYSTEM in TWRP.
i had no chance to flash TWRP instead of updated OS since there is only lineage-14.1-20170306-nightly-d802-signed.zip and open_gapps-arm-7.1-stock-20170308.zip on my flash (OTG)
update: It does not matter what ROM do I install to my D802, I get TWRP bootloop only ..
Solution
I know the solution of this problem just read carefully
You have to do it from the fastboot.
Google your device and learn how to enter into fastboot mode after switching off the phone via pressing combination of hardware keys.
Then Google and download the exact same following files for your phone model not others (wrong files will brick your phone). Following are the files :-
1 boot.img
2 droidboot.img
3 recovery.img
4 rom.zip
(All the above mentioned files should be the official files provided by the manufacturer company of the phone)
Now download the basic Windows or mac or Linux driver of your phone for the computer you have and install it in your computer, then restart your computer and also install the "minimal fastboot" in your computer and then connect your phone while phone is in fastboot mode, then copy all the above mentioned files in the folder where the minimal fastboot driver is installed.
Now go to that folder where minimal fastboot is installed in your computer and press shift key and while keep pressing the shift key right click the mouse and select "open command" here.
Note Google and learn the command how to check whether your device is connected to your computer via fastboot.
Then install all the mentioned files using fastboot commands.
Hurry you have your phone with official ROM and then if you want use the same technique you may have used earlier to unlock bootloader and root your device and installing the latest twrp.recovery and then lineageos.
Now your phone is unbricked and you have latest lineageos.
Also remember the ota update of lineageos is broken so don't install updates via updater app.
The safest method is to download the whole update package and put it into your phones internal/external/usb otg drive and install via custom recovery.
Be happy
जय श्रीराम ?????
Hello, I have sent my phone to warranty and after that I received a phone with NO RPMB and after many frustrations I found (with help of many users and forums) how to workaround this..
To start:
Download boot image from here
Download twrp from the official website
Change the name to boot.img and twrp.img and put it in the platform-tools folder
Open the terminal there
Download your favourite rom
Enter fastboot mode on your phone
!!!!After this you will loose all of your data!!!!
Paste this to the terminal
fastboot oem unlock
(select yes on your phone)
fastboot flash boot boot.img
fastboot flash recovery twrp.img
fastboot format userdata
fastboot format cache
Reboot to recovery (if it doesn't enter at the first time enter download mode again and restart to recovery)
After that you have twrp and can flash every rom.. yay!!!
Wipe everything.
Copy the rom zip to your phone using MTP
Install your fancy new rom
If you want to install magisk:
Install the magisk manager.
On the app select install and select patch image file. (it will create a new boot image already patched)
After that install the new image (patched_boot.img) using twrp
Do a clean instalation of your ROM (recomended) or a Factory Reset first
Reboot to twrp
Select install
Click in install image
Select patched_boot.img
Select install to boot partition
Reboot.
Install magisk manager and do the sugested setup.
You now have magisk working
Thanks to all the users that helped me!!
I had real trouble getting twrp to work the last time I tried this a few months ago. Followed the steps here and am now on pixel experience with magisk. Thanks!
Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.
sigibian said:
Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.
Click to expand...
Click to collapse
My bootloader is still unlocked after following this guide
For Magisk:
-Install your custom ROM and boot it up (without root)
-Then extract the boot.img from the ROM zip file and save it on your phone storage.
-Install the Magisk manager apk
-In Magisk manager, select install Magisk> choose the patch boot image option and -Select the boot.img you previously saved.
Once it's done, reboot into twrp and flash the patched boot.img. When you reboot Magisk will be working.
I've had no issues with my bootloader, even after an ota update for pixel experience.
Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656
sigibian said:
Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656
Click to expand...
Click to collapse
The official twrp works for fine for me, haven't tried the 4 core version but it can't hurt to try if you need it.
Power off your phone then press and hold volume - and power to enter bootloader, then connect to your pc and follow the steps in the OP
So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache
sigibian said:
So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache
Click to expand...
Click to collapse
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.
baddesthad said:
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.
Click to expand...
Click to collapse
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.
sigibian said:
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.
Click to expand...
Click to collapse
You need to use vol- and power to go into fastboot mode then connect to the pc. As for userdata and cache, if you don't clean them when coming from stock you will have issues (your data will be encrypted if you're on stock?). As I said this guide worked for me. The op was talking about fastboot mode in the 6th option (also there is much more information in the thread I linked above)
sorry for the confusing i wanted to say fastboot mode..
i knew the thread that you are saying but most people doesn't want to search so I made a little thread only with the needed parts..
I use it myself so I have a place to remember all the steps when I need to change the rom to a new one or when I make experiments and brick my phone XD
If anyone know anything else that should be in here just say, I really want to improve the post
Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?
fhartane said:
Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?
Click to expand...
Click to collapse
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not
PedroM.CostaAndrade said:
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not
Click to expand...
Click to collapse
Thanks for the answer. You mean that now I have twrp, I can flash custom Roms with my bootloader locked without any issue?
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk
Yes if you have TWRP you can install custom ROMs, custom Kernel's, magisk, super su, etc..
the locked bootloader only prevents you from using fastboot commands like the one needed for installing custom recovery
Now that you have TWRP you can use it for everything
Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?
Fabiojoker said:
Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?
Click to expand...
Click to collapse
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC
Hello, thank you for your information, since I haven't done modding on phones for a long time, I didn't remember exactly the procedure with fastboot and therefore I didn't understand where I had to put the files, but in the end I did it.
Thank you
PedroM.CostaAndrade said:
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC
Click to expand...
Click to collapse
Why is a custom boot image needed? I don't want to root.
Previously I was using Ressurection Remix treble rom which is based on android 9 pie. I went to TWRP and wiped the OS. Then I tried to install a new rom called Dot OS. But it showed error 7. So I flashed Vendortofactory zip within twrp and without rebooting again into TWRP I flashed a new TWRP image within TWRP by selecting Recovery mode. After that I cant boot into TWRP and as already my OS is gone I also cannot boot into any system. Moreover my device is not getting detected in my PC. I cannot install TWRP by writing commands in cmd, while the phone is in fastboot mode as the device is not getting detected in my pc. Really it is urgent. I will be glad if someone helps me. Thanks in advance.
What is the present booted state of your device? Are you in twrp, or bootloader. Most of the time you can keep on pressing the power button. When it boots into a message about unlocked bootloader, press volume button to select recovery and it will boot into twrp
You should be able to boot in fastboot mode without recovery nor os, maybe your drivers are not working on windows? Try different usb ports, check if the display says "bootloader" or something. If nothing works try the usb shunt, this device is literally 'unbrickable' if it's working properly.
Watch this video(https://www.youtube.com/watch?v=DexLELi04XY) and then you will be able to detect your phone in your pc in qcom 9008 mode , then use qfil to flash ZUI firmware ,there are plenty of tutorials on the internet for that ,then follow the proper procedure mentioned in DotOs thread for flashing the new rom .
Hope it helped .
If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method
yashpatel1221 said:
If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method
Click to expand...
Click to collapse
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.
sanjay.2704 said:
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.
Click to expand...
Click to collapse
I don't understand what you are talking about as i say i am not some kind of technical expert i am here help regarding this i faced similar situation where i am not able to enter into recovery and also not able to enter into the os and when i restart the phone it automatically boot into fast boot mode what ever option i select and i solved my problem by this method
Hi everyone,
I got Chinese version Note 8 Pro from Mi official store and unlocked bootloader after 7 days.
I downloaded Global MIUI 11 ROM via official miui download link, "ifelixit+FLASHER+TOOLKIT+Begonia" and installed ADB drivers etc.
After run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1, it installed recovery, then I'm able to boot into TWRP, and then I installed global rom from there, meanwhile wiped everything in it as I don't need China version rom. Phone reboot well and new global rom works great.
Then I try to install Magisk, I noticed recovery seems be restored to original, no worries, I re-run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1 to install TWRP again. Whatever I did, I cannot get TWRP back, when I hold power/+, it keep blank and will restart, but if I don't hold them, it can get into the system.
My first question is: 1. At this stage, is recovery crash already?
I didn't think too much and I get into system, install Magisk manager, let it to patch boot.img, I then use following command in fastboot mode
fastboot flash boot boot_patch.img
After I finished, I noticed maybe I can do TWRP here as well, then I also input
fastboot flash boot TWRP.img
After reboot, the phone is dead....No fastboot, NO recovery, no vibration. exactly described as here
[UNBRICK - stuck on DA mode / Authorised Service Account required]
https://forum.xda-developers.com/re...ide-unbrick-stuck-da-mode-authorised-t4000433
I re-think what I did, my question is
2. Will boot_patch.img Magisk patched not suitable for China phone with global rom?
3. Is fastboot dead because I installed recovery into boot via fastboot flash boot TWRP.img?
Thanks for your time and appreciated for any knowledgeable reply.
Flash your original boot.img for your original firmware or just download the xiaomitoolV2 and flash it that way. I see a lot of people flashing stock firmware using TWRP. Hence the v2 tool only works if your phone still fully boots. NOTE do not flash stock FW or UPDATE using TWRP you will brick the device. Chances are your FW didn't flash and just ADB CMD fatsboot flash boot ( then set BOOT.IMG ) in the CMD and get the devices booting again. Then use the V2 tool to flash the global firmware get that to stick then use the ifelixit tool to flash recovery once in recovery go advanced file mgr system-root at the bottom delete boot P then close AVB 2.0 then hit the install root button SU - magisk 19.4 will be installed. no need to wipe or format the phone ( DON'T FORGET TO WIPE CACHE & DALVIC.
---------- Post added at 09:00 AM ---------- Previous post was at 08:52 AM ----------
fastjohnson said:
Flash your original boot.img for your original firmware or just download the xiaomitoolV2 and flash it that way. I see a lot of people flashing stock firmware using TWRP. Hence the v2 tool only works if your phone still fully boots. NOTE do not flash stock FW or UPDATE using TWRP you will brick the device. Chances are your FW didn't flash and just ADB CMD fatsboot flash boot ( then set BOOT.IMG ) in the CMD and get the devices booting again. Then use the V2 tool to flash the global firmware get that to stick then use the ifelixit tool to flash recovery once in recovery go advanced file mgr system-root at the bottom delete boot P then close AVB 2.0 then hit the install root button SU - magisk 19.4 will be installed. no need to wipe or format the phone ( DON'T FORGET TO WIPE CACHE & DALVIC.
Click to expand...
Click to collapse
Remove the back off the phone and disconnect the battery for 5 min just to be sure hold the power button to clear all power left in the phone. Main objective is to get useage again fastboot or recovery. If you get recovery sideload your boot img and flash it on the next reboot twrp will be overridden.
fastjohnson said:
Flash your original boot.img for your original firmware or just download the xiaomitoolV2 and flash it that way. I see a lot of people flashing stock firmware using TWRP. Hence the v2 tool only works if your phone still fully boots. NOTE do not flash stock FW or UPDATE using TWRP you will brick the device. Chances are your FW didn't flash and just ADB CMD fatsboot flash boot ( then set BOOT.IMG ) in the CMD and get the devices booting again. Then use the V2 tool to flash the global firmware get that to stick then use the ifelixit tool to flash recovery once in recovery go advanced file mgr system-root at the bottom delete boot P then close AVB 2.0 then hit the install root button SU - magisk 19.4 will be installed. no need to wipe or format the phone ( DON'T FORGET TO WIPE CACHE & DALVIC.
---------- Post added at 09:00 AM ---------- Previous post was at 08:52 AM ----------
Remove the back off the phone and disconnect the battery for 5 min just to be sure hold the power button to clear all power left in the phone. Main objective is to get useage again fastboot or recovery. If you get recovery sideload your boot img and flash it on the next reboot twrp will be overridden.
Click to expand...
Click to collapse
Thanks. Currently my phone doesn't have reboot, no recovery, purely blank on screen, only power led shows when connecting via USB. In this situation, must open back case to disconnect the battery? I heard about it's free to go back to mi store and re flash it back. To open back case it won't have warranty anymore. Struggling....
idog8818 said:
Thanks. Currently my phone doesn't have reboot, no recovery, purely blank on screen, only power led shows when connecting via USB. In this situation, must open back case to disconnect the battery? I heard about it's free to go back to mi store and re flash it back. To open back case it won't have warranty anymore. Struggling....
Click to expand...
Click to collapse
I also have two bricked phones note 8 pro with no recovery, only white led shows when connecting via USB.
First bricked with TWRP and then flashed with false boot.img, second is bricked with OrangeFox-Unofficial-begonia.img.
I was open back case and disconnect the battery, stay 3 days but nothing working to reboot to fastboot or recovery.
Also I have already tried with short circuit test point to EDL mode but phone is still dead. I have downloaded many xiaomi and other tools and firmwares, installed all available usb drivers and reading all internet forums.
Please help!
Same
Hello,
I think I did the same error, flashing a wrong boot.img...
I tell you if I manage to do something.
hello, the solution to the problem is the battery is completely discharged until the device stops responding to any attempts to start using the key combination. unless you tried to flash a fastboot partition. the solution works after hard bricking after trying to upload incompatible twrp or other rom (I uploaded Chinese twrp on eu rom). ok, we start:
1. holding vol - and power plug in the usb cable (the buttons are released when the notification LED changes from very bright for a moment to slightly dimmed)
2. you will see the long unseen battery symbol with a lightning inside (i.e. a completely discharged battery, the charge status will begin to show the percentage)
3. Turn off the USB cable at 3 percent.
4. now an important thing - you need to start the phone only trying to enter the fastboot mode otherwise the phone will start to boot the system and get stuck again and you will have to unload it again
5. you will finally enter the fastboot , using only the software from xiaomi or xiaomi flash and fastboot rom
I succeeded after 2 weeks of waiting for it to discharge ...
I copied this tutorial from this partner klocek80 , and it worked perfectly
https://forum.xda-developers.com/showpost.php?p=81191977&postcount=72
danyv77 said:
hello, the solution to the problem is the battery is completely discharged until the device stops responding to any attempts to start using the key combination. unless you tried to flash a fastboot partition. the solution works after hard bricking after trying to upload incompatible twrp or other rom (I uploaded Chinese twrp on eu rom). ok, we start:
1. holding vol - and power plug in the usb cable (the buttons are released when the notification LED changes from very bright for a moment to slightly dimmed)
2. you will see the long unseen battery symbol with a lightning inside (i.e. a completely discharged battery, the charge status will begin to show the percentage)
3. Turn off the USB cable at 3 percent.
4. now an important thing - you need to start the phone only trying to enter the fastboot mode otherwise the phone will start to boot the system and get stuck again and you will have to unload it again
5. you will finally enter the fastboot , using only the software from xiaomi or xiaomi flash and fastboot rom
I succeeded after 2 weeks of waiting for it to discharge ...
I copied this tutorial from this partner klocek80 , and it worked perfectly
https://forum.xda-developers.com/showpost.php?p=81191977&postcount=72
Click to expand...
Click to collapse
This only helps when boot image is not damaged.
Duchan_xda said:
I also have two bricked phones note 8 pro with no recovery, only white led shows when connecting via USB.
First bricked with TWRP and then flashed with false boot.img, second is bricked with OrangeFox-Unofficial-begonia.img.
I was open back case and disconnect the battery, stay 3 days but nothing working to reboot to fastboot or recovery.
Also I have already tried with short circuit test point to EDL mode but phone is still dead. I have downloaded many xiaomi and other tools and firmwares, installed all available usb drivers and reading all internet forums.
Please help!
Click to expand...
Click to collapse
I'm with you. The boot image has error and when MTK realize it has something wrong it will NOT enter into fastboot. The only way to fix this is too use SP Flash Tool for deep flash. Mi store uses this way as well to fix the issue.
Try this:
https://c.mi.com/thread-2173190-1-0.html
ppthom said:
Try this:
https://c.mi.com/thread-2173190-1-0.html
Click to expand...
Click to collapse
This does NOT work. Please don't waste time on it.
:good:Thanks for clarifying this. Back to square one ...
idog8818 said:
Hi everyone,
I got Chinese version Note 8 Pro from Mi official store and unlocked bootloader after 7 days.
I downloaded Global MIUI 11 ROM via official miui download link, "ifelixit+FLASHER+TOOLKIT+Begonia" and installed ADB drivers etc.
After run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1, it installed recovery, then I'm able to boot into TWRP, and then I installed global rom from there, meanwhile wiped everything in it as I don't need China version rom. Phone reboot well and new global rom works great.
Then I try to install Magisk, I noticed recovery seems be restored to original, no worries, I re-run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1 to install TWRP again. Whatever I did, I cannot get TWRP back, when I hold power/+, it keep blank and will restart, but if I don't hold them, it can get into the system.
My first question is: 1. At this stage, is recovery crash already?
I didn't think too much and I get into system, install Magisk manager, let it to patch boot.img, I then use following command in fastboot mode
fastboot flash boot boot_patch.img
After I finished, I noticed maybe I can do TWRP here as well, then I also input
fastboot flash boot TWRP.img
After reboot, the phone is dead....No fastboot, NO recovery, no vibration. exactly described as here
[UNBRICK - stuck on DA mode / Authorised Service Account required]
https://forum.xda-developers.com/re...ide-unbrick-stuck-da-mode-authorised-t4000433
I re-think what I did, my question is
2. Will boot_patch.img Magisk patched not suitable for China phone with global rom?
3. Is fastboot dead because I installed recovery into boot via fastboot flash boot TWRP.img?
Thanks for your time and appreciated for any knowledgeable reply.
Click to expand...
Click to collapse
Are you recover your phone? I'm still waiting one year...
Duchan_xda said:
Are you recover your phone? I'm still waiting one year...
Click to expand...
Click to collapse
I didn`t find any background on your issue, just something like you actually have a device with white led light blinking.
I read this thread before (yes, some weeks ago) this happened to me yesterday https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-unlock-note-8-pro-authorised-t4168805 the short story is that I were trying to return to Miui 12 after of using some custom ROMs and something in the flashing process failed I mean it was an incomplete flashing and I assumed that most probably just the bootloader partition was damaged. The whole important fact in this situation is that you have yet available fastboot mode but like the splash partition with its image was gone I couldn `t see it and I were anyway in fastboot mode so I could flash the proper files to "unbrik" it. (my device is unlocked)
What you should try is connect it with PC while you`re pressing the volume down, enter to adb/fastboot environment and type fastboot commands to see if device is recogniced, you don`t have to hear constant reboot sounds or in this case press the power button simulating that you are powering off device.
Hi.
So I was messing around with the twrp custom recovery and (without thinking much of it) wiped everything in the advanced wipe menu :crying: (System, data, EVERYTHING)
I knew I had removed my OS and that I could just use the twrp recovery to install a new rom onto my phone BUT little did I know, when I tried to boot into the custom recovery, it would just loop the screen with the redmi logo
I am still able to boot into fastboot mode, and I have tried to flash the same twrp recovery but with no avail (It still loops the redmi logo screen)
So now I'm here to ask if there is any advice that you could give me to try and fix this problem that I have gotten myself in (I am not worried about deleting any of my personal files. I would just like to get twrp to boot so that I can install another rom)
Thanks in advance to anyone who can help me with this problem :highfive:
Hi, which rom are you trying to install? for android 9 use this recovery https://forum.xda-developers.com/re...overy-unofficial-twrp-recovery-redmi-t4002397, for android 10 this one... https://forum.xda-developers.com/showpost.php?p=82062075&postcount=7...
If what nuvulet said doesn't work, in fastboot, flash the exact same stock ROM you had before, let it boot and then flash TWRP.
nuvulet said:
Hi, which rom are you trying to install? for android 9 use this recovery https://forum.xda-developers.com/re...overy-unofficial-twrp-recovery-redmi-t4002397, for android 10 this one... https://forum.xda-developers.com/showpost.php?p=82062075&postcount=7...
Click to expand...
Click to collapse
Hi, thanks for the fast reply.
The stock android I had before I wiped everything was android 9, MIUI 11. I tried againt to flash the recovery through fast boot but (like before) when I try to boot into the recovery (by holding the volume up button as it reboots), the redmi logo keeps appearing and disappearing and doesn't go to the twrp recovery. At the current moment I don't have any OS installed (since it got deleted when I wiped everything)
Any other leads I could try?
wang1chung said:
If what nuvulet said doesn't work, in fastboot, flash the exact same stock ROM you had before, let it boot and then flash TWRP.
Click to expand...
Click to collapse
I'm not sure how I can flash the stock ROM without the twrp recovery. I had the impression that you needed twrp recovery in order to install ROMs in the first place.
If there is a method to flash a ROM using fastboot, please explain since my unexperienced self has no idea how to do this. :laugh:
Thanks for the fast reply too
Sqorpz said:
I'm not sure how I can flash the stock ROM without the twrp recovery. I had the impression that you needed twrp recovery in order to install ROMs in the first place.
If there is a method to flash a ROM using fastboot, please explain since my unexperienced self has no idea how to do this. :laugh:
Thanks for the fast reply too
Click to expand...
Click to collapse
MiFlash works through fastboot mode. It's also safer to flash with MiFlash, just make sure you have the correct ROM.
I can't find the guide right now, I'm at work
Ok, do you know adb fastboot... if not, follow this guide...
https://forum.xda-developers.com/showthread.php?t=2317790
Install usb adb drivers for RN8P if you don't have, try this for w10...
https://forum.xda-developers.com/redmi-note-8-pro/help/usb-drivers-t4035617
Download twrp for android 9 or android 10 from here...
https://forum.xda-developers.com/showpost.php?p=82115341&postcount=2
Put the recovery (*.img format) into installed adb folder...
Open cmd and navigate to inside adb folder...
Put the phone into fastboot mode (press volume- and power) connect usb and type in console...
adb devices (this start adb server)
Type...
fastboot devices (this return a device number, if not, something is wrong)
Type...
fastboot flash recovery *.img (change * for the name of the recovery file)
Disconnect the phone and press volume+ and power at the same time and now you have twrp intalled...
When start if the data is encrypted, push cancel, go to wipe, go to format data, type "yes", and confirm slide...
Now connect the phone to usb (if not recognize the phone, go to mount, and enable MTP)
Copy the rom in to internal storage for your android twrp version... search here
https://forum.xda-developers.com/redmi-note-8-pro/how-to/redmi-note-8-pro-android-10-public-t4072795
You have several versions... for eu, search in my post...
And the rest, install, select, etc. etc....
nuvulet said:
Ok, do you know adb fastboot... if not, follow this guide...
https://forum.xda-developers.com/showthread.php?t=2317790
Install usb adb drivers for RN8P if you don't have, try this for w10...
https://forum.xda-developers.com/redmi-note-8-pro/help/usb-drivers-t4035617
Download twrp for android 9 or android 10 from here...
https://forum.xda-developers.com/showpost.php?p=82115341&postcount=2
Put the recovery (*.img format) into installed adb folder...
Open cmd and navigate to inside adb folder...
Put the phone into fastboot mode (press volume- and power) connect usb and type in console...
adb devices (this start adb server)
Type...
fastboot devices (this return a device number, if not, something is wrong)
Type...
fastboot flash recovery *.img (change * for the name of the recovery file)
Disconnect the phone and press volume+ and power at the same time and now you have twrp intalled...
When start if the data is encrypted, push cancel, go to wipe, go to format data, type "yes", and confirm slide...
Now connect the phone to usb (if not recognize the phone, go to mount, and enable MTP)
Copy the rom in to internal storage for your android twrp version... search here
https://forum.xda-developers.com/redmi-note-8-pro/how-to/redmi-note-8-pro-android-10-public-t4072795
You have several versions... for eu, search in my post...
And the rest, install, select, etc. etc....
Click to expand...
Click to collapse
Yes, this is the method I used to flash the twrp recovery.
My problem was that even after installing it (using this method), i would still not be able to boot into the recovery.
However, it is fixed now. I used the Mi Flash tool in order to install the stock rom and then installed twrp after that. :good:
wang1chung said:
MiFlash works through fastboot mode. It's also safer to flash with MiFlash, just make sure you have the correct ROM.
I can't find the guide right now, I'm at work
Click to expand...
Click to collapse
I tried this method and IT WORKED!!
After installing Mi flash I was able to download the stock rom and install it through the program without any errors.
I was then able to finally boot into the OS and install twrp recovery, then install the custom rom! :laugh:
Thanks for this method. I would probably still be stuck on the Redmi logo if it weren't for this