Hey peeps,
Anyone else had issues with lining out to an amp/set of speakers? I can jack in headphones and all is gravy but when I connect a standard 3.5mm jack to my amp I get nothing/nada?! I had an issue with my nexus s sounding crackly and distorted too. If I connect the same cable to the headphone socket of my TV it's fine. What gives?
Ez
Sent from my Galaxy Nexus using Tapatalk
I've plugged mine into my car without issues. I have it plugged into the RCA input jacks that connect to my back-seat dvd player. So its 3.5mm to red/white rca
OK I just got my adapter it is the official Samsung OEM MHL adapter. I had just one problem but I now have three. (PS I Have the White T-Mobile Galaxy S II which is the exact smart phone as the AT&T Galaxy S II Skyrocket)
Problem #1: I am not sure if its possible or how to go about doing this. OK I use a nice 27" HP 2711x LED Monitor on my bedroom with my Xbox 360 connected via VGA, my gaming rig connected via HDMI, and now I have my MHL adapter connected via HDMI. The problem is that my Monitor is only a monitor and it has no internal speakers, but I have a pair of external speakers that I use for sound the speakers have 3 input options. I can connect directly into the subwoofer portion via the red and white RCA cables(this is how my Xbox is connected), I can connect with my basic 3.5mm auxiliary cable plugged into the speakers input jack(this is the way that I connect my phone to play music), or I can connect via the inline Auxiliary cable that the speakers have built in(which is the way my computer is connected). Im not an idiot when it comes to Tech I know that HDMI cables handle both sound and video but since my monitor only takes the video part I can't get any audio when streaming from my phone to it, so I plugged my speakers inline auxiliary cable to my phone so that the sound would reroute to it, but that didn't work either it produced no sound =/, so I also tried to just plug in my headphones into my phone and again no sound. So are there any work arounds or ways to make it so my phone will let me output sound via its 3.5mm headphone jack or even its loud speaker? Or is there a seperate cable/jack I can purchase to split the HDMI cables video and sound, and make the sound output via either 3.5mm audio jack or red and white RCA cables, and let the video output via HDMI?
Problem #2: OK my MHL adapter was working video wise but today I plugged it all up and it wouldn't work at all my monitor kept saying no input detected so I was sad and I decided to remove my phones battery to do a soft reset. And it fixed the problem so I started web browsing etc and all of a sudden it stopped working again. Is there a work around for this or reason or fix?
Problem #3: Is there anyway to make the output quality full HD? Because when I am outputting and on the browser its like the resolution is so off which results in everything being huge and somewhat pixelated.
Sorry for the length I like for my post to be as in depth as possible.
Sent from my SGH-T989 using XDA
OK I just got my adapter it is the official Samsung OEM MHL adapter. I had just one problem but I now have three. (PS I Have the White T-Mobile Galaxy S II which is the exact smart phone as the AT&T Galaxy S II Skyrocket)
Problem #1: I am not sure if its possible or how to go about doing this. OK I use a nice 27" HP 2711x LED Monitor on my bedroom with my Xbox 360 connected via VGA, my gaming rig connected via HDMI, and now I have my MHL adapter connected via HDMI. The problem is that my Monitor is only a monitor and it has no internal speakers, but I have a pair of external speakers that I use for sound the speakers have 3 input options. I can connect directly into the subwoofer portion via the red and white RCA cables(this is how my Xbox is connected), I can connect with my basic 3.5mm auxiliary cable plugged into the speakers input jack(this is the way that I connect my phone to play music), or I can connect via the inline Auxiliary cable that the speakers have built in(which is the way my computer is connected). Im not an idiot when it comes to Tech I know that HDMI cables handle both sound and video but since my monitor only takes the video part I can't get any audio when streaming from my phone to it, so I plugged my speakers inline auxiliary cable to my phone so that the sound would reroute to it, but that didn't work either it produced no sound =/, so I also tried to just plug in my headphones into my phone and again no sound. So are there any work arounds or ways to make it so my phone will let me output sound via its 3.5mm headphone jack or even its loud speaker? Or is there a seperate cable/jack I can purchase to split the HDMI cables video and sound, and make the sound output via either 3.5mm audio jack or red and white RCA cables, and let the video output via HDMI?
Problem #2: OK my MHL adapter was working video wise but today I plugged it all up and it wouldn't work at all my monitor kept saying no input detected so I was sad and I decided to remove my phones battery to do a soft reset. And it fixed the problem so I started web browsing etc and all of a sudden it stopped working again. Is there a work around for this or reason or fix?
Problem #3: Is there anyway to make the output quality full HD? Because when I am outputting and on the browser its like the resolution is so off which results in everything being huge and somewhat pixelated.
Sorry for the length I like for my post to be as in depth as possible.
Sent from my SGH-T989 using XDA
So I sold my Nexus 7, for the 8.0, for the MHL capability because I have the AppRadio2 and want to output the video onto the screen and audio to the car speakers. The only problem is that it doesn't seem like the 8.0 outputs audio through the mhl cable. I've tried multiple cables multiple external displays... The works. But can't seem to get audio to an external device. I've also tried an audio output app and that didn't work either. Any information is helpful. Thanks in advance guys
Wait...So are you getting video only, and no audio, or nothing at all???
Did you check the Android settings under "Accessories" for audio output options when docked or when other accessories are attached?
BTW, are you using the ARliberator App?
First of all, I don't think that the Note 8.0 is on Pioneer's list of approved/confirmed devices for use on the AppRadio2.
Also, the MHL/HDMI adapter that is sold in Pioneer's "Android Connection Kit" is the older 5-pin micro-USB connector.
You tried it with Samsung's newer 11-pin microUSB/MHL-to-HDMI adapter that is made for the SGS3 and Note2, right??? And you are plugging in the adapter to a microUSB charger, right? It will not work without this.
Pioneer's and Samsung's adapter for the SGS2 and original Note 5.3" will not work because it is the older 5-pin microUSB/MHL connector. You can buy the Samsung 5-pin to 11-pin MHL adapter for about $10 that should allow the older MHL/HDMI adapter to work:
http://www.amazon.com/Original-Samsung-Adapter-Converter-EPL-FU10BEBSTD/dp/B0083FYL0O/ref=sr_1_6?s=electronics&ie=UTF8&qid=1366945559&sr=1-6&keywords=samsung+5-pin+to+11-pin+mhl+adapter
I don't know why you'd want to use the smaller and lower Res AppRadio2's screen over the Note 8.0's anyway?!? I guess you lose AM/FM tuner and the Backup Camera if you have one.
You can bypass the AppRadio2 and just use your Tablet to get RCA line level preouts and Digital Optical (Toslink) audio from the Note 8.0 if you use the MHL adapter with this $40 device:
http://www.amazon.com/ViewHD-Premium-Audio-Extractor-Converter/dp/B00AHS8LD8/ref=sr_1_1?ie=UTF8&qid=1366941077&sr=8-1&keywords=viewhd+hdmi+digital+audio
Oh, but I forgot to mention that you would need separate car audio amplifiers to power your speakers for this setup to work. :/
I just returned my AppRadio2 and am using my SGN2 with this adapter in my car audio system to get digital audio output sent from my Note 2 to the digital optical input of my RF 3Sixty.3 DSP, then to my amplifiers and then speakers.
I'm using my Note 2 because I wanted to use just one audio source/device, that also has cell phone capability. The AppRadio2's built-in Dialer/Phone app borked/hid my Note 2's Keypad when it forces the display into landscape mode. :/ I guess that I could have used Tasker to switch back to portrait when the dialer/phone app opened, but then it is tiny on the AppRadio2's display. The International GT-N7100 SGN2 also has a hardware FM Tuner, or I use TuneIn Radio to stream almost any AM/FM station worldwide.
My car also came with a handsfree Bluetooth setup that worked much better than the AppRadio2.
I'm also using the Samsung SGS2 SmartDock in combination with the USB JoyCon EXR plugged into the SmartDock to keep my OEM Steering Wheel Controls and add extra functions to my SWC by long-pressing the buttons, etc. You have to program the JoyCon EXR with your PC before installing it, but it works great to control your Android's audio player functions with your SWC.
If you do get it working, you'll probably want to use the "Screen Standby #root" app to turn off the Note 8.0's screen backlight without putting it to sleep so it charges up faster. You must be rooted to use this app, however.
bbfoto said:
Wait...So are you getting video only, and no audio, or nothing at all???
Are you using the ARliberator App?
First of all, I don't think that the Note 8.0 is on Pioneer's list of approved/confirmed devices for use on the AppRadio2.
Also, the MHL/HDMI adapter that is sold in Pioneer's "Android Connection Kit" is the older 5-pin micro-USB connector.
You tried it with Samsung's newer 11-pin microUSB/MHL-to-HDMI adapter that is made for the SGS3 and Note2, right??? And you are plugging in the adapter to a microUSB charger, right? It will not work without this.
Pioneer's and Samsung's adapter for the SGS2 and original Note 5.3" will not work because it is the older 5-pin microUSB/MHL connector. You can buy just the 5-pin to 11-pin MHL adapter for about $12 that should allow it to work if you have the older MHL/HDMI adapter.
I don't know why you'd want to use the smaller and lower Res AppRadio2's screen over the Note 8.0's anyway?!? I guess you lose AM/FM tuner and the Backup Camera if you have one.
You can bypass the AppRadio2 and just use your Tablet to get RCA line level preouts and Digital Optical (Toslink) audio from the Note 8.0 if you use the MHL adapter with this $40 device:
Oh, but I forgot to mention that you would need separate car audio amplifiers to power your speakers for this setup to work. :/
I just returned my AppRadio2 and am using my SGN2 with this adapter in my car audio system to get digital audio output sent from my Note 2 to the digital optical input of my RF 3Sixty.3 DSP, then to my amplifiers and then speakers.
I'm using my Note 2 because I wanted one audio source/device, with cell phone capability...the AppRadio2's built-in Dialer/Phone app borked/hid my Note 2's Keypad when it forces the display into landscape mode. :/ I guess that I could have used Tasker to switch back to portrait when the dialer/phone app opened, but then it is tiny on the AppRadio2's display.
I'm also using the Samsung SGS2 SmartDock in combination with the USB JoyCon EXR plugged into the SmartDock to keep my OEM Steering Wheel Controls and add extra functions to my SWC by long-pressing the buttons, etc. You have to program the JoyCon EXR with your PC before installing it, but it works great to control your Android's audio player functions with your SWC.
If you do get it working, you'll probably want to use the "Screen Standby #root" app to turn off the Note 8.0's screen backlight without putting it to sleep so it charges up faster. You must be rooted to use this app, however.
Click to expand...
Click to collapse
I am using ARLiberator, and in terms of compatibility its not an issue considering I'm using the MHL and not the Pioneer "Android Kit". I think it is an issue with the device itself because I tried other cables and other displays and it just doesnt seem to be able to output audio through the MHL
tmaclax013 said:
I am using ARLiberator, and in terms of compatibility its not an issue considering I'm using the MHL and not the Pioneer "Android Kit". I think it is an issue with the device itself because I tried other cables and other displays and it just doesnt seem to be able to output audio through the MHL
Click to expand...
Click to collapse
So you ARE getting video out, just no audio?
Hmmm...weird. You are using the 11-pin MHL adapter though, right? The "Android Connection Kit" uses a "MHL" adapter, too, and it is actually better than the Samsung original, but it is 5-pin, and won't work with newer devices. So I just wanted to be sure you are using the 11-pin MHL adapter made for the Galaxy S3/4 and Note 2?
Also, maybe check that the audio output settings are set to "Stereo" (2 Channel), and not to "5.1 Surround"? IDK?
Have you done the new firmware updates on the Note 8.0 yet? There is a thread here about it.
tmaclax013 said:
I am using ARLiberator, and in terms of compatibility its not an issue considering I'm using the MHL and not the Pioneer "Android Kit". I think it is an issue with the device itself because I tried other cables and other displays and it just doesnt seem to be able to output audio through the MHL
Click to expand...
Click to collapse
This is probably a dumb question, but you have checked the volume level on the note once connected, right?
I just setup an HDMI connection on my unit and didn't get audio at first. Turns out that it doesn't send line level audio over HDMI. It creates a new mixer item that is muted by default on the note side.
Once I adjusted that, everything worked fine. Best of luck.
Sent from my GT-N5110 using Tapatalk HD
Rottgrub said:
This is probably a dumb question, but you have checked the volume level on the note once connected, right?
I just setup an HDMI connection on my unit and didn't get audio at first. Turns out that it doesn't send line level audio over HDMI. It creates a new mixer item that is muted by default on the note side.
Once I adjusted that, everything worked fine. Best of luck.
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
I couldnt figure it out, so after all was said and done, I just factory reset it, and now it works. Although it was kind of a pain, it turned out ok in the end
Bummer you had to resort to a factory reset, but glad it's working for you now! Rock on.
tmaclax013 said:
So I sold my Nexus 7, for the 8.0, for the MHL capability because I have the AppRadio2 and want to output the video onto the screen and audio to the car speakers. The only problem is that it doesn't seem like the 8.0 outputs audio through the mhl cable. I've tried multiple cables multiple external displays... The works. But can't seem to get audio to an external device. I've also tried an audio output app and that didn't work either. Any information is helpful. Thanks in advance guys
Click to expand...
Click to collapse
I'm not sure if this is a HDCP issue or a implementation issue but that's likely the way it is.
On my Galaxy S3, last time I tried it, I think you could have audio over Bluetooth or jack while doing HDMI/MHL video out. But it's been quite a while since I've had the cable. (It's perfectly fine on the SII X/Hercules as I had my fiancee try it before I got myself the wireless adapter.)
Under the Miracast (AllShare Cast) stuff, you are only able to direct audio through the dongle and thus need an adaptor that can split off the audio from the HDMI somehow, assuming those support the necessary HDCP crap.
whenever I plug my Tab 3 into the aux cable in my car, it does not recognize that I'm doing so & doesn't play anything through the cars' speakers. I've verified that the aux cable is good & even tried another cable for the heck of it(no luck).
If I plug in headphones though they work just fine(so I know the jack on the tab is good).
Does anyone know why this is happening & if there's a fix?