Develop Bugs

Button illumination problem

I have KGL v2.80. Button are always ON, even when ILlUM wire is disconnected. Factory Settings option for 'button lights' is unchecked (dusabled).
I found several posts about similar problem, but there us no conclusive explanation is this MCU version or ROM issue?
Can someone confirm / share experience with this issue?
Thank for help!

to solve that put mcu file modded from darkleo.

Marius B said:
to solve that put mcu file modded from darkleo.
Click to expand...
Click to collapse
Thank you!
Yes it solves button illumination problem.
But...
It introduce horrible touch sound.... Instead of more or less acceptable beep, darkleo MCU uses some noisy piggy-inspired sound that is so strange that everyone driving with me in a car is asking is my stereo broken

FOrd Focus SYNC

Hi,
anybody here have a Ford Focus working fine using the SYNC application to works with the FORD original SYNC.
I insert a new ROm from here ( update_4_4_4_1024X600_RK3188_11_MAL_25_12_2015) but the SYNC still all in chinese and i dont know how to change it to portuguese or english
I also dont hear nothing. Perhaps the application is directed to another sound output ...
Any help is apreciated.
Kind Regards
Franc

I am having the same issue!
I have a Ford Focus and a KLD RK3066 unit. I've updated my HU many times, using more than 5 different firmwares and every time the SYNC app is MUTED. There must be something wrong with the sound output, as mentioned!!
NOTE FOR NON FORD OWNERS: SYNC is a hardware (that is controlled by the HU in an app with the same name) that comes with the car that controls native bluetooth calling and music playing. It can be used together with the HU, using the car's much better microphone and USB connector. Losing this function is really bad for a Ford owner.
Please some help!
Thanks
kiko4949 said:
Hi,
anybody here have a Ford Focus working fine using the SYNC application to works with the FORD original SYNC.
I insert a new ROm from here ( update_4_4_4_1024X600_RK3188_11_MAL_25_12_2015) but the SYNC still all in chinese and i dont know how to change it to portuguese or english
I also dont hear nothing. Perhaps the application is directed to another sound output ...
Any help is apreciated.
Kind Regards
Franc
Click to expand...
Click to collapse

Mashio said:
I am having the same issue!
I have a Ford Focus and a KLD RK3066 unit. I've updated my HU many times, using more than 5 different firmwares and every time the SYNC app is MUTED. There must be something wrong with the sound output, as mentioned!!
NOTE FOR NON FORD OWNERS: SYNC is a hardware (that is controlled by the HU in an app with the same name) that comes with the car that controls native bluetooth calling and music playing. It can be used together with the HU, using the car's much better microphone and USB connector. Losing this function is really bad for a Ford owner.
Please some help!
Thanks
Click to expand...
Click to collapse
You can ask the seller if the HU can support the SYNC.

alvinjones377 said:
You can ask the seller if the HU can support the SYNC.
Click to expand...
Click to collapse
It does actually! There's even an app that comes in the Android called SYNC, which displays all SYNC information (and it works, but sadly somehow is muted and i can't figure out how to fix it's sound)

Mashio said:
It does actually! There's even an app that comes in the Android called SYNC, which displays all SYNC information (and it works, but sadly somehow is muted and i can't figure out how to fix it's sound)
Click to expand...
Click to collapse
hi, Im also a ford focus owner and i have rk3188 HU (KGL5) you should check in the factory settings the CANbus option. My sync apk works great (spanish) and sounds a little bit lower than the HU sound, so try to max the vol (maybe it is, sometimes if im at level 9 sound i cant hear it, i usually place at 20 vol level). I´ve used some malaksys ROM and i had no problem, and today i upgraded the MCU and still works. Now im having some FC but i think with a factory reset it will solve. The app also works with steering wheel controls, (if a press the SYNC key in it calls the app)

Hi, i have a Erisin ES2301F (1024x600 Rk3188 KGL) with a Ford Kuga MK1 (2009). CanBus module HW 1.0 FW 2.0. In Factory Menu (126) i put Focus-Modeo-Explorer (Simple) but SYNC doesn't work. How can i made it doing something...
In the past i had a Sony CD6000 BT, and i removed only the head unit ( i leave the BT module connected and it seem still powered) but the SYNC app doesn't do anything. I connect the cell with BT of the headunit, or i have to do a new search? I don't see any BT source than the one of the Erisin.

Add:
The question is: maybe with another ROM, i could view which door is opened, what temperature i have set in the climatronic and so on? I'm sure those signals are on canbus of my car (Kuga Titanium) 'cause i read on the cluster of the display of the car, and i see some chinese radio that showing those info. One for all is the Joying.
If those info will pass on the radio, also SYNC should works, 'cause in the electric diagram original mic and original BT are on canbus, all connected directly to GEM.
So, OR the decode module don't works..... or the MCU is so different that doesn't capture those signal.
Someone have the answer?

I have a Ford Escape but I have not figured out how to wire in my canbus to this radio (I have a joying). Can someone point me to the right direction?

dcplaya said:
I have a Ford Escape but I have not figured out how to wire in my canbus to this radio (I have a joying). Can someone point me to the right direction?
Click to expand...
Click to collapse
Hi,
first, try to set Ford Focus Raise in factory canbus setting.
second, check if you have connected AUX L and AUX R cinches to corresponding ones (auxL to Aux L and aux R to aux R) in your harness.
I have so in my Focus and SYNC is ok, but the layout and maintenance of the app is horrible.

czarekskib said:
Hi,
first, try to set Ford Focus Raise in factory canbus setting.
second, check if you have connected AUX L and AUX R cinches to corresponding ones (auxL to Aux L and aux R to aux R) in your harness.
I have so in my Focus and SYNC is ok, but the layout and maintenance of the app is horrible.
Click to expand...
Click to collapse
What are the AUXL and AUX R cinches?? In the quadlock Ford , i have CAN L e CAN H connected to Quadlock of the radio, then they go to decoder box and returned on the radio into the special connector.

in my case - as in uploaded photo, nr 2, white and red chinches

In my case is total differenti. I have only the quadlock . all signals coming from there. No RCA chinches. Maybe you have a focus 3 (2012+). My canbus decoder has only one connector

I think my Escape (2011) with SYNC isn't supported at all. I cant find any wiring harness that works with Joying. I know where my Canbus wires are and could splice them in but I can't even find a generic canbus joying harness.

Did anyone success making Sync work on a Focus 2015 restyling?

New MCU
jperezch said:
Did anyone success making Sync work on a Focus 2015 restyling?
Click to expand...
Click to collapse
Hi,
I have installed a new 8.1 Android head unit, at first it didn't work but the supplier sent me a new MCU that works with Focus 2015. Anyone wants the MCU? Maybe your SYNC works too

foicanetadavo said:
Hi,
I have installed a new 8.1 Android head unit, at first it didn't work but the supplier sent me a new MCU that works with Focus 2015. Anyone wants the MCU? Maybe your SYNC works too
Click to expand...
Click to collapse
I've bought an 8.1 tesla style radio for my 2015 focus with sync2 but steering wheel controls don't work! anyone can help me?

Where does the special port jack connect to ...
czarekskib said:
in my case - as in uploaded photo, nr 2, white and red chinches
Click to expand...
Click to collapse
I dont have the that black sync port ..rest wires connected ... HU goes completely mute when i press sync button... any suggestions ..also.. noob to HU discussion here
I have ecosport 2016 titanium.... head unit....10 inch , 7.1 , 2gb 32gb variant local reseller hypersonic ...

Ravi Venugopal said:
I dont have the that black sync port ..rest wires connected ... HU goes completely mute when i press sync button... any suggestions ..also.. noob to HU discussion here
I have ecosport 2016 titanium.... head unit....10 inch , 7.1 , 2gb 32gb variant local reseller hypersonic ...
Click to expand...
Click to collapse
okay found that port...the local technician had just not used it...sync working perfectly now....allthough that UI needs some improvement

Ravi Venugopal said:
okay found that port...the local technician had just not used it...sync working perfectly now....allthough that UI needs some improvement
Click to expand...
Click to collapse
pics from aliexpress, these r just for total amount of cables required....connect at both ends of canbus. i am using focus config as ecosport Is not shown on the settings.

PX5 & Volkswagen Dynaudio - Only sound when ignition is on

Hi there. I bought a PX5 a few weeks ago and it's working perfect with Hal9k's rom.
I bought a Golf MK6 with Dynaudio last week and installed my PX5. The problem I have is that the sound stops an few seconds after turning off the ignition while the key is still in the ignition lock. It seems like the amplifier is going to sleep. The PX5 is still playing music. With the original Volkswagen car stereo I was able to hear music without ignition on if it was activated once and the key was still in the lock.
Amy suggestions? Thanks

Ammby said:
Hi there. I bought a PX5 a few weeks ago and it's working perfect with Hal9k's rom.
I bought a Golf MK6 with Dynaudio last week and installed my PX5. The problem I have is that the sound stops an few seconds after turning off the ignition while the key is still in the ignition lock. It seems like the amplifier is going to sleep. The PX5 is still playing music. With the original Volkswagen car stereo I was able to hear music without ignition on if it was activated once and the key was still in the lock.
Amy suggestions? Thanks
Click to expand...
Click to collapse
Wrong CANbus decoder, wrong cabling or chosed wrong car in the factory settings.

Ammby said:
Hi there. I bought a PX5 a few weeks ago and it's working perfect with Hal9k's rom.
I bought a Golf MK6 with Dynaudio last week and installed my PX5. The problem I have is that the sound stops an few seconds after turning off the ignition while the key is still in the ignition lock. It seems like the amplifier is going to sleep. The PX5 is still playing music. With the original Volkswagen car stereo I was able to hear music without ignition on if it was activated once and the key was still in the lock.
Amy suggestions? Thanks
Click to expand...
Click to collapse
I never solved this problem. but newer canbus decoders or MCU updates might solve it. is it an old unit you have or a new one?

Hi. It's a new one (Mtcd) with latest MCU

When the unit detected that ignition is off is normal that go to sleep, if you want solved this behavior, you need study the cable connection of your unit, for connect +12V and ACC to the same wire of your car (+12V).
Only I'm not sure if the unit go to "autosleep" mode when press the power switch in the panel of px5.
Regards
Enviado desde mi CLT-L29 mediante Tapatalk

ask thé seller if your unit is compatible with dynaudio.
I have px5 from isudar with dsp. The seller make sure with me than my car did not have dynaudio has it is not compatible.

jcoco22 said:
When the unit detected that ignition is off is normal that go to sleep, if you want solved this behavior, you need study the cable connection of your unit, for connect +12V and ACC to the same wire of your car (+12V).
Only I'm not sure if the unit go to "autosleep" mode when press the power switch in the panel of px5.
Regards
Enviado desde mi CLT-L29 mediante Tapatalk
Click to expand...
Click to collapse
The unit went into sleep if I pull the key out of the ignition lock so it stays on until then. With the original VW unit I was able to hear music after shutting down the ignition and left my key inside the lock.

Ammby said:
The unit went into sleep if I pull the key out of the ignition lock so it stays on until then. With the original VW unit I was able to hear music after shutting down the ignition and left my key inside the lock.
Click to expand...
Click to collapse
Yes, this is the normal behavior for px5, if you want have music without key, you need review the connection for ACC wire and connect directly to 12V.
May be you can ask to your seller about this alternative connection for your unit.
Enviado desde mi CLT-L29 mediante Tapatalk

jcoco22 said:
Yes, this is the normal behavior for px5, if you want have music without key, you need review the connection for ACC wire and connect directly to 12V.
May be you can ask to your seller about this alternative connection for your unit.
Enviado desde mi CLT-L29 mediante Tapatalk
Click to expand...
Click to collapse
Sorry but you misunderstood. The PX5 is still running in ignition off-position till you pull out the key but the music stops.

bad post sorry

Ammby said:
Sorry but you misunderstood. The PX5 is still running in ignition off-position till you pull out the key but the music stops.
Click to expand...
Click to collapse
It sounds like you have an external amplifier which is not fed with power when the key is in the off position. There's a blue cable/white stripe in the wire bundle labelled AMP. Connect that one to your external amp. power input.

Dasaita HA5404-Max6 Sound Problem

Hello Guys
I'm really happy with the Head unit when I haven't this Problem and I hope we find a solution.
Here is the Problem:
When i listen to music in every app or from Phone I hear the sound for 5 seconds. Then the radio play again but I hear nothing. Then I touch the volume+ or volume- I hear the sound for 5 seconds and then the same thesound gos out.
I don't know more....
Thanks for xyour help

Does it happen with all apps on the headunit including the analog radio?
Do you have a custom rom installed? Or stock rom?
Enviado desde mi SM-G950F mediante Tapatalk

Yes it's on all apps including the analog radio. It's the stock rom on the head unit. I write Dasaita on aliexpress and on facebook but no answer come back.

That's a weird problem does the volume level go to 0% when the sound goes away? Or does it stay to what you have it set at? Is it only the volume + that restores sound? I wonder if the volume - key is stuck on?

The volume stay on the level that i set. No i can restore it with + or - button. I have two videos on youtube but i can't post this.

Psychochindli21 said:
The volume stay on the level that i set. No i can restore it with + or - button. I have two videos on youtube but i can't post this.
Click to expand...
Click to collapse
From looking at your videos. I think the unit may be defective imo

Ask dasaita for a solution or replacement
Enviado desde mi SM-G950F mediante Tapatalk

if you have a soundsystem like JBL or BOSE in your car ,you must change one option in the factory setting menu (with 126)
Go to canbus menu and change amplifier = "with amplifier"
in Peugeot 208 with JBL sound system ,if you dont do that ,we have the same probleme like you

Delor3an88 said:
if you have a soundsystem like JBL or BOSE in your car ,you must change one option in the factory setting menu (with 126)
Go to canbus menu and change amplifier = "with amplifier"
in Peugeot 208 with JBL sound system ,if you dont do that ,we have the same probleme like you
Click to expand...
Click to collapse
That's the solution i have yet no time to make a great test but i have make the change and I hear the first 30 seconds of a song. I must test this tomorrow. But i think this is the solution. I'm very happy about your tip... Many thanks to you

Psychochindli21 said:
That's the solution i have yet no time to make a great test but i have make the change and I hear the first 30 seconds of a song. I must test this tomorrow. But i think this is the solution. I'm very happy about your tip... Many thanks to you
Click to expand...
Click to collapse

Problem with the can bus Citroen C4 assembly of a dedicated Chinese Headunit.

Hi
I have a problem with the can bus
ciytroen c4 assembly of a dedicated chinese.
The problem appears after plugging the radio into the cube after the serial one, namely the canbus module beeps pulsating. I will add that the radio turns on, receiving stations, they can be operated.
I will add that after configuring the module in the radio settings, the steering wheel buttons work this way. means there is communication and it still squeaks. I tried to insert the bundle with the module also squeaks.
watch it

kolaaa3 said:
Hi
I have a problem with the can bus
ciytroen c4 assembly of a dedicated chinese.
The problem appears after plugging the radio into the cube after the serial one, namely the canbus module beeps pulsating. I will add that the radio turns on, receiving stations, they can be operated.
I will add that after configuring the module in the radio settings, the steering wheel buttons work this way. means there is communication and it still squeaks. I tried to insert the bundle with the module also squeaks.
watch it
Click to expand...
Click to collapse
Hi
If you didn't manage to solve the problem yet...
You need to setup the can bus decoder in your head unit and then the beeping will stop.
If you need help just ask!
Cheers

StevoVTS said:
Hi
If you didn't manage to solve the problem yet...
You need to setup the can bus decoder in your head unit and then the beeping will stop.
If you need help just ask!
Cheers
Click to expand...
Click to collapse
Hi
thanks for the hint
one problem solved
there are more of these problems
- does not show the open door
-no possibility to control car functions
- air conditioning control does not work

kolaaa3 said:
Hi
thanks for the hint
one problem solved
there are more of these problems
- does not show the open door
-no possibility to control car functions
- air conditioning control does not work
Click to expand...
Click to collapse
Hi,
I'm dealing with the same problems.
Some of the car functions you can change over the car settings app.
And there should be a car info app which shows fuel consumption.
I'm still using the OEM multiscreen with steering wheel to change car settings.
But when using that I have the issue that all OEM displays get off and on during driving.
I'm trying to find a solution.

StevoVTS said:
But when using that I have the issue that all OEM displays get off and on during driving.
I'm trying to find a solution.
Click to expand...
Click to collapse
I have this problem too
There will also be information and oil change
every now and then kompyer performs a system test itself
what is your can bus decoder model?

kolaaa3 said:
I have this problem too
There will also be information and oil change
every now and then kompyer performs a system test itself
what is your can bus decoder model?
Click to expand...
Click to collapse
Yes the system diagnostics are running too.
I have a Raise can bus decoder G-PSA-RZ-65
I have 3 of them and with all the same problems.

StevoVTS said:
Yes the system diagnostics are running too.
I have a Raise can bus decoder G-PSA-RZ-65
I have 3 of them and with all the same problems.
Click to expand...
Click to collapse
I have a PSA-RZ- 15 decoder
I saw a video on youtube where everything worked
in the comments, the author wrote that he was using the PSA-RZ- 01 decoder
how do you set the can on the radio??

kolaaa3 said:
I have a PSA-RZ- 15 decoder
I saw a video on youtube where everything worked
in the comments, the author wrote that he was using the PSA-RZ- 01 decoder
how do you set the can on the radio??
Click to expand...
Click to collapse
I bought a PSA-RZ-01 decoder. This one doesn't work with my android HU. Maybe I'll try the Hiworld decoder. Really annoying

Are these MTCB type head units?

Did anybody find a fix for this problem.
I have the same problem with the citroen c4 doing a selftest while driving.
And it keeps resetting the small display

sanas24 said:
Did anybody find a fix for this problem.
I have the same problem with the citroen c4 doing a selftest while driving.
And it keeps resetting the small display
Click to expand...
Click to collapse
Is it an MTCB unit or hotboxing

marchnz said:
Is it an MTCB unit or hotboxing
Click to expand...
Click to collapse
It is the Srnubi T10 with MCU: TS10.1.1 android 11
https://nl.aliexpress.com/item/4001276007928.html

sanas24 said:
It is the Srnubi T10 with MCU: TS10.1.1 android 11
https://nl.aliexpress.com/item/4001276007928.html
Click to expand...
Click to collapse
Not MTCB, wrong forum

marchnz said:
Not MTCB, wrong forum
Click to expand...
Click to collapse
True, but I think the problem is related to the canbus module. So wanted to check if someone with similar problems did find a fix

Hi to all. I finally got a newer Andeoid version for my headunit and now all informations I need or I expected are showing on my headunit.
Everything before the update wasn't shown now appears like doors open informations, ECU fault codes, fuel informations and consumption, AC informations everything is shown like a popup information. And all that withe the Rais canbus decoder. The small original display I kept cause of the missing informations on the headunit is now not needed any more.
If someone still have problems with the canbus all you need is to update your andeoid unit to the actual version for your unit.

Can you advise what your canbuse settings are ?
Inside of the factory menu ?
I just installed a android T10 unit with a Raise canbus module. But only thing that is working on my Citroen C4 are the volume buttons...and even that does not work correct. I i press the menu button on my steering wheel sound also go up

StevoVTS said:
Hi to all. I finally got a newer Andeoid version for my headunit and now all informations I need or I expected are showing on my headunit.
Everything before the update wasn't shown now appears like doors open informations, ECU fault codes, fuel informations and consumption, AC informations everything is shown like a popup information. And all that withe the Rais canbus decoder. The small original display I kept cause of the missing informations on the headunit is now not needed any more.
If someone still have problems with the canbus all you need is to update your andeoid unit to the actual version for your unit.
Click to expand...
Click to collapse
Could you tell what exactly Android Unit do you have?

StevoVTS said:
Hi,
I'm dealing with the same problems.
Some of the car functions you can change over the car settings app.
And there should be a car info app which shows fuel consumption.
I'm still using the OEM multiscreen with steering wheel to change car settings.
But when using that I have the issue that all OEM displays get off and on during driving.
I'm trying to find a solution.
Click to expand...
Click to collapse
Hi, i have the same problem. Do you find something, how to fix this problem with resetting displays?

StevoVTS said:
Hi to all. I finally got a newer Andeoid version for my headunit and now all informations I need or I expected are showing on my headunit.
Everything before the update wasn't shown now appears like doors open informations, ECU fault codes, fuel informations and consumption, AC informations everything is shown like a popup information. And all that withe the Rais canbus decoder. The small original display I kept cause of the missing informations on the headunit is now not needed any more.
If someone still have problems with the canbus all you need is to update your andeoid unit to the actual version for your unit.
Click to expand...
Click to collapse
do you mean the newer version of the headunit or can.apk? I have done both and despite selecting different models the problem exists.. (My MCU starts CVD)
czaja1998 said:
Hi, i have the same problem. Do you find something, how to fix this problem with resetting displays?
Click to expand...
Click to collapse
Have you gone to Car Settings under factory and selected the relevant file under Can Setting? R011 is for Citroen C4 where the steering keys work fine, however my instrument panel keeps flicking between kmph and mph..
R016 works fine but only volume buttons work and the display screen thinks CD or radio is on.. (see picture)

scotcruz said:
do you mean the newer version of the headunit or can.apk? I have done both and despite selecting different models the problem exists.. (My MCU starts CVD)
Have you gone to Car Settings under factory and selected the relevant file under Can Setting? R011 is for Citroen C4 where the steering keys work fine, however my instrument panel keeps flicking between kmph and mph..
R016 works fine but only volume buttons work and the display screen thinks CD or radio is on.. (see picture)
Click to expand...
Click to collapse
In my android radio version, I didn’t see anything like “R0..” When I choose version of canbus “raise” -> psa/Citroen -> I have only models of car and I get C4L. Everything works like steering wheel buttons but I have problems with resetting displays and appearing diagnosis.