I am connecting with iPhone to bluetooth I get wussing noise when playing music it will go away when I stop the music. It does take 30 seconds after the music stops. It also does the same think when connected to the CarPlay dongle from Carlinkit autokit.apk I have updated to lastest. It does not do this with radio or apple music app running local on the head unit. I have reset the using and turned the amp down to -15db in factory settings. I have added extra ground.
I have bose factory amp in GMC yukon I am wondering if this is the problem.
Related
Hey there, I have a quick question about Bluetooth.
Here is the situation: I use a bt headset when driving every time. It's a godsend etc etc. But I also have an auxiliary port on my car's head-unit which I use to plug my phone into and stream music. I would like to minimize the amount of wires going around because sometimes I also have to plug in a usb power cable into the phone and then things get messy.
So here's my question: Can I have my bt headset paired and connected, and also get a Bluetooth audio receiver (like the official htc bt receiever: http://www.htc.com/www/accessories/htc-bluetooth-stereoclip/) and have it paired and connected at the same time. This way I can stream music but also receive calls to my headset.
Thanks
nope.jpg
Only if the car is compatible with streaming music via Bluetooth.
Well the head-unit does not have/support Bluetooth, this much is true. However it does have an Aux port like I said, and with the device I posted (that htc bt dongle) i can plug it into the aux port and stream that way. I know this will work but I don't know if I can also still use my bt headset for phone calls at the same time.
If it matters, the headset is a Jawbone Icon.
Thanks!
no one?
deli pastrami said:
Hey there, I have a quick question about Bluetooth.
Here is the situation: I use a bt headset when driving every time. It's a godsend etc etc. But I also have an auxiliary port on my car's head-unit which I use to plug my phone into and stream music. I would like to minimize the amount of wires going around because sometimes I also have to plug in a usb power cable into the phone and then things get messy.
So here's my question: Can I have my bt headset paired and connected, and also get a Bluetooth audio receiver (like the official htc bt receiever: http://www.htc.com/www/accessories/htc-bluetooth-stereoclip/) and have it paired and connected at the same time. This way I can stream music but also receive calls to my headset.
Thanks
Click to expand...
Click to collapse
Yes, you can. I use that exact setup in my Nissan Juke. You can have multiple pairings simultaneously. The music even stops when you get a call, then resumes after.
Hello Everyone,
We here at iBOLT would love to find out what percentage of Samsung Galaxy S4 users are listening to streaming music from their handset while in the car. As your S4 has access to great music Apps like Pandora, Spotify, TuneIn, Slacker etc. it would be great to find out what percentage are driving a car equipped with car-stereo that features Bluetooth Audio Streaming (so called "A2DP" profile). If not, what kind of speaker do you have set up?
Don't have a car, but when I ride my motorbike I use the S4A to listen to music through my bluetooth headset in my helmet.
And if I were to buy a car, the ability to pair it with my phone (also for a2dp) is definitely important.
I stream both Internet content and content stored on my device. The content isn't what's important. What's important is the ability to stream the content through bluetooth to the radio.
my car has a Galaxy Tab 2 7" in my dash board so most of my music is played right off the 16GB MicroSD Card in the tablet, but when I do want to stream from my Subsonic server at home I do it through my phone. I do have a BT Headset (Samsung HS3000) which supports A2DP wired into my car speakers, but from my phone the volume is super low for some reason, so I usually just plug my phone into the 3.5mm headset plug I have also hooked up in my car.
I just use simple wired headphones because my bluetooth set fell off my head and shattered to tiny bits on the floor it's funny cause it still works but there's no way to get it back together again. I only use play music at the moment. I'd rather not stream because it bites into my data plan with sharp pointy teeth. That crap leaves marks!
Well I use my Plantronics Bluetooth headsets while I am in the car or on my bike...the music quality is superb and it just makes me to enjoy the track with driving though and its quite easy to answer the calls even so I just love my headsets they are pretty awesome one to use.....
I like listen to streaming music while driving, cause it can make me sober when drive.:laugh:
mainly using deezer for streaming with 3,5mm jack !
I do.
Connecting phone (headphone connector) to car audio system by cable.
Mainly using xiialive
d8389 said:
I do.
Connecting phone (headphone connector) to car audio system by cable.
Mainly using xiialive
Click to expand...
Click to collapse
you are using the all new bluetooth cable, right? [emoji16]
i do, with alpine UTE-72BT
d0n s4sh said:
you are using the all new bluetooth cable, right? [emoji16]
i do, with alpine UTE-72BT
Click to expand...
Click to collapse
3.5 connector. Not bluetooth.
Diablo2424 said:
my car has a Galaxy Tab 2 7" in my dash board so most of my music is played right off the 16GB MicroSD Card in the tablet, but when I do want to stream from my Subsonic server at home I do it through my phone. I do have a BT Headset (Samsung HS3000) which supports A2DP wired into my car speakers, but from my phone the volume is super low for some reason, so I usually just plug my phone into the 3.5mm headset plug I have also hooked up in my car.
Click to expand...
Click to collapse
Is your car stereo a kenwood? I used to be an installer and a lot of kenwood bluetooth models have a default setting to play bluetooth audio through only one speaker. This had me stumped for a while, but what you need to do to change it is to put it in the "standby" source, and then access "detailed settings" and look for a setting I believe is labeled bluetooth HF audio or something, enter that setting and you can change it from "front/front only" to "all". It took a while for me to finally find it because you need to be on the standby source and access the settings. You'd think to be able to change it while in the bluetooth source. Hope that solves your issue.
I just bought a z2 about a week ago. Been a great phone so far. It updated to Oreo as soon as I turned it on.
There is one issue. Bluetooth. When I originally connected it to my Alpine cd-hd148bt, it would stream music, but the phone profiles would not load. So I updated the bt firmware on the headunit. Now if I restart the headunit, it will connect with all the appropriate icons for audio and phone. If I start an audio app, it says playing, the head says playing, but there is no sound. After a couple of minutes, the entire phone will disconnect from the deck. It won't come back until I pull the faceplate and reboot the headunit. Even turning off the car and powering off won't get the bt to work.
Does anyone have any ideas? I love listening to Pandora, and my city has a hand free law, so I would love to have the phone working also.
PLEASE HELP!! I will owe you a cookie.
Thanks
Edit: unlocked bootloader and magisk 15.2.
im also having issues with bluetooth, since headset will disconnect from time to time and while streaming music to a bluetooth speakers (bose, harman, jbl, chinese, etc) audio will cut from time to time, until bluetooth connection drops an will have to restart phone in order to connect again
I am also having Bluetooth issues, keeps disconnecting from my headphones, or connects and doesn't stream. Supposedly with Oreo Bluetooth had been updated to version 5.
I have a Kia Optima 2017 and a Pixel 3 XL. It's been working fine till 2 days ago. The phone connects to the radio and the music plays on Google Play, but no audio comes out. I've tried unpairing the phone, went into the car radio and deleted the saved phone. Restarted the phone, turned off and on the phone. The music app shows the music playing, but nothing comes out the speaker. I've tried bluetooth speakers and the music comes out fine. I've tried radio stations and the car speakers do work.
Novakingwai said:
I have a Kia Optima 2017 and a Pixel 3 XL. It's been working fine till 2 days ago. The phone connects to the radio and the music plays on Google Play, but no audio comes out. I've tried unpairing the phone, went into the car radio and deleted the saved phone. Restarted the phone, turned off and on the phone. The music app shows the music playing, but nothing comes out the speaker. I've tried bluetooth speakers and the music comes out fine. I've tried radio stations and the car speakers do work.
Click to expand...
Click to collapse
Turn up the bluetooth volume
Go in the bluetooth settings and click on the 3 dots on the right of your cars bluetooth speaker
From there select the audio option and now if you play music it will play it from the car speakers
I am having a really strange and annoying issue with my Bluetooth audio. When I connect to a headset (TWE, HS3000, etc.) or my Spark Amp, media audio works just fine, no issues at all. On every car stereo (cheap Alpine, Kenwood deck w/Apt-X, Sena motorcycle headset) that I connect to, 95% of the time, the media audio does not work. I can take and make calls, receive notifications, but music audio doesn't come through (shows that it is playing, though), and navigation audio doesn't come through. It doesn't matter what app I use (tried VLC, Amazon Music, PowerAmp, YouTube, etc.). Sometimes I hear a pop or click. The only way to get it to work is to disconnect the bluetooth, then reconnect it and then it works. I suspect it has something to do with the hands-free profile, but I cannot for the life of me figure out how to get it to work reliably. It is very tedious to have to disconnect and reconnect every time I start my car (especially if I am out running errands at multiple shops). This has been going on since the day I bought the phone.
Does anyone have any ideas?
LM-G820TM
G820TM20j
Kernel: 4.14.117
Security patch: February 1, 2021