Related
Hello my friends.
I got a Galaxy Note II here - but my sister decided to play with it and now its locked on the 'too many wrong patterns screen'.
To make things even worst i haven't associated it with a google account (i recently bought it from a friend of mine).
When i try to hard-reset it the phone goes to the famous android logo with red exclamation - i think he rooted the phone and didn't told me.
Anyway when i get on this screen if i press the 'back' key on the phone i can access the 'Android System Recovery' - but i can't select any option.
I know i should use vol up/down to scrool betweeen options and power to select - but i press power and nothing happens.
Tried also pressing the menu button - nothing happened also.
Another problem is, for some reason i don't know the phone won't connect to my computer - only in charge mode.
Tried tons of things lots of times but it isn't showing up no matter what i do.
I tried also to call me from another phone and get in any menu - but when i do that i can only select normal options (send an sms, refuse call, accept).
I would like to hear suggestions from you guys since i've ran out of resources - i don't know what else i can do in order to recover the phone.
Thanks in advance
additional note: i just know its model is i9220+
It accepts WCDMA and a GSM SIM.
Pablo
oh yeah
those are the things i readed in order to find *ANY* solution:
http://forum.xda-developers.com/showthread.php?t=1420273
http://forum.xda-developers.com/showthread.php?t=1946968
http://forum.xda-developers.com/showthread.php?t=817703
http://forum.xda-developers.com/showthread.php?t=997974
http://forum.xda-developers.com/showthread.php?t=1266172
http://forum.xda-developers.com/showthread.php?t=1266172
if you don't have any important stuff on the phone...why don't you just flash it with stock firmware using Odin?? in download mode?
Sent from my GT-N7105 using Tapatalk 4
dead soul said:
if you don't have any important stuff on the phone...why don't you just flash it with stock firmware using Odin?? in download mode?
Sent from my GT-N7105 using Tapatalk 4
Click to expand...
Click to collapse
This is what i want.
But my computer do not detect the phone so i can't go into download mode.
I don't have anything important there - not worried about what is on its memory.
like i said when i plug the phone into the computer it only starts charging and nothing more.
is there 'any trick' i can try heh ?
ps: i installed kies, uinstalled, installed samsung usb drivers, installed, etc...well what i mean is that i tried most of those tricks to get the phone detected but no success - maybe flashing directly from my SD ?
also - i 'suspect' my phone is that n7100 . since i don't have its manual and can't access its menu either i just suspect because its from brazil and those n7100 models are like 'international'.
pablobhz said:
This is what i want.
But my computer do not detect the phone so i can't go into download mode.
I don't have anything important there - not worried about what is on its memory.
like i said when i plug the phone into the computer it only starts charging and nothing more.
is there 'any trick' i can try heh ?
ps: i installed kies, uinstalled, installed samsung usb drivers, installed, etc...well what i mean is that i tried most of those tricks to get the phone detected but no success - maybe flashing directly from my SD ?
also - i 'suspect' my phone is that n7100 . since i don't have its manual and can't access its menu either i just suspect because its from brazil and those n7100 models are like 'international'.
Click to expand...
Click to collapse
ok from how you are explaining stuff I'm not sure if you understand the flashing procedure thoroughly and risk involved
1. flashing can be risky
2. you need to download Odin example version 1.8
3. when your phone just powers on you need to know the EXACT model number example N7105 or N7100 or any other version..this is very important as if you flash a wrong firmware you could destroy your phone completely
4. find a stock ROM for your phone on xda or at samfirmware.com
5. install Samsung drivers or install Samsung kies but while Odin is on Samsung kies services must be closed
6. keep your phone in download mode by switching off your phone then HOLD CENTER/HOME BUTTON + VOLUME DOWN + POWER BUTTON
7. your phone may warn you and I believe may ask you to press volume up button to continue
8. then you are now in download mode.
9.open Odin
10. connect your phone to your pc via USB cable..give it time to register/install itself as a new hardware..etc etc as you may see new hardware detected pop up if running on Windows
10. a yellow COM port will appear on Odin showing the phone is connected
11. place the stock ROM file on the PDA section UNTICK REPARTITION , TICK REBOOT
12. this should flash your phone....however my procedure is a vague way of how to go about it... you may need to see a detailed step by step procedure on XDA if you are new to this.
I take no responsibility for any damages...I hope you almost everything we do here on XDA had risks involved
or the safer option take to a Samsung repair center!!
Sent from my GT-N7105 using Tapatalk 4
To get into download mode all you need to do is turn of the phone and hold power home volume down until you see the warning sign.
Sent from my SAMSUNG-SGH-I317 using xda premium
Put device on download mod and tell us what information it displays
You need not to connect device with PC to get downbload mode. Do this.
Vol Down + Home + Power
then vol up in warning screen to finally get download mod.
dr.ketan said:
Put device on download mod and tell us what information it displays
You need not to connect device with PC to get downbload mode. Do this.
Vol Down + Home + Power
then vol up in warning screen to finally get download mod.
Click to expand...
Click to collapse
Okay
when i put the device into download mode (vol down + home + power) - it goes to a 'factory mode'
then options i have here are:
Full Test
Item Test
Test Report
Clear eMMC
Version
Reboot
And i can't choose any of 'em , no matter what i press.
Same happens when i go into recovery mode.
For getting into recovery o mode i i press the following combination: vol up + home + power
Then i get the android logo when a red exclamation - but when i press the 'back' button i can get into the "Android System Recovery <3e>", where i have the following options:
Reboot System Now
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
and same thing - i can't select any of 'em - no matter what button combination i press.
I tried plugging the phone into three computers none of 'em detected the phone.
Sometimes after many power on/off the computer detects it but instantly loses also - its something very quickly.
I can't get into any of the menus of the phone since i'm stuck in the 'too many wrong patterns' screen and i have no associated google account.
Also when i plug the phone in the pattern screen the only thing it says its about charging - nothing about plug in usb or anything like that.
I'm a bit used with flashing (did it a lot on my RAZR XT910) and i know all risks.
I've also found out my note ii is model GT-N7100 (this is the one sold in brazil) - i couldn't get its manual but my bet is going to be this - samsung service center won't repair the phone without the fiscal coupon .
I'll try more and keep this post update - but if anyone got an hint about this just tell me
Thanks in advance
Pablo
Your device seems to be clone one and not original N7100.
Have you purchased from authorized centre?
Sent from my GT-N7100 using xda premium
Your device is not a Samsung phone, you said as much in your first post.
Asking us to help is pointless, you need to talk to other clone owners and see what they have done.
muppetmania said:
Your device is not a Samsung phone, you said as much in your first post.
Asking us to help is pointless, you need to talk to other clone owners and see what they have done.
Click to expand...
Click to collapse
Oh okay.
I tought it also but wasn't sure.
I'm really sorry for taking your time
It was looking like Samsung because of its back
There's an stick with:
MODEL: i9220+
FCC ID: A3L SHI9220+
For information call: 1 888 987 4357
Bluetooth
CE01688
IMEI
and Made in Korea
There are also entries to:
WCDMA SIM
GSM SIM
and SD Card
But when i power it on there's nothing related to Samsung in fact - i never get anything related to Samsung.
Only android logo like a rocket.
It seems to be running an android 4.1 because of the interface
Anyway i'll see what i can do and thanks in advance for all the help
Again, sorry for taking your time.
Pablo
EDIT:
A Thhread talking about my phone:
http://forum.xda-developers.com/showthread.php?t=1909516
It seems its a Note II Clone really.
I'll keep searching information around XDA and google.
Again, thanks in advance
Hey all...and to answer the number one question, yes I did do A TON of searches already to find a solution...PLEASE HELP if you have the knowledge
Phone Model: Galaxy S III (SPH-L710) Sprint 16gb
Firmware/ROM: All stock and never tried ANY customization
Problem: I think the problem happened when the phone auto updated to 4.3. Now when the phone tries to boot it just boots to the second Samsung "Samsung Galaxy S III" screen, reboots and then will get to the same screen and just sits there. One time I even let it sit there for 30 minutes just to see if it needed the ridiculous amount of time. When I try to get the phone into recovery mode (Volume UP/Home key/then the Power key) it will boot and on the first Samsung "Samsung" screen, in the top left corner in small print, it shows "booting recovery...". Then it will just go strait to the second Samsung screen then keeps rebooting twice before it will just stop on the second Samsung screen again. When I try to get the phone into ODIN mode (Volume DOWN/Home key/then the Power key) it will boot asking me if I'm sure and to press Volume UP to continue. Once I press Volume UP, to continue, I get to ODIN mode. In the top left corner it shows...
ODIN MODE
Product Name: SPH-710
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
(all grayed out) Qualcomm Secureboot: ENABLE
Then in the middle of the screen is the little Android guy. Below that it shows, "Downloading..." "Do not turn off target!!". And it just sits there doing nothing else.
I'm pretty sure I have done everything I could possible do to get it working again. From what I understand there may be other things I can do. Worse case scenario, if I must, I would be willing to loose everything on the phone and start over from scratch, if that's even possible.
There has to be some VERY smart people on here that can help me. This is my wife's phone and we don't have an upgrade until May...PLEASE HELP. Thanks all!!!
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
jimchee said:
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
I already downloaded latest versions of both. It states, from phone off and unplugged, start phone using ODIN/download route then immediately plug into PC then open ODIN and click the button....but I cant get that far because ODIN app on PC never recognizes the phone to be able to do so.
I'm now starting to get very discouraged because i'm seeing in some places that the device needs to be put into USB debugging mode. Please tell me this isn't true. Because there has never been any reason to put the phone into USB debug mode.
Can someone please confirm this. I'm really crossing my finger that there is a way to do this without needing to be in USB debug mode...PLS PLS PLS!!!
Thanks for your reply
http://forum.xda-developers.com/galaxy-s3-sprint/help
jimchee said:
Okay 1st go to sammobile.com and download the firmware for d2att also you will need Odin I think it's 3.04. You can search odin on xda there are a few guides to use then put phone in download mode and use odin to flash the firmware, everything u need to follow is posted in sgsIII development forum
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
He has the Sprint version, get the one for d2spr, correct?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
DirtTrash said:
I already downloaded latest versions of both. It states, from phone off and unplugged, start phone using ODIN/download route then immediately plug into PC then open ODIN and click the button....but I cant get that far because ODIN app on PC never recognizes the phone to be able to do so.
I'm now starting to get very discouraged because i'm seeing in some places that the device needs to be put into USB debugging mode. Please tell me this isn't true. Because there has never been any reason to put the phone into USB debug mode.
Can someone please confirm this. I'm really crossing my finger that there is a way to do this without needing to be in USB debug mode...PLS PLS PLS!!!
Thanks for your reply
Click to expand...
Click to collapse
You have to plug the device in from download mode AFTER Odin is running. So, phone in download mode, start Odin, then plug in. Before you go that far are you letting go of the buttons when trying to get to recovery as soon as you seen 'recovery starting' in the top left corner or are you still holding them? If you do not let go the device will continue to attempt a normal boot. If you can get into recovery and do a factory restore it very well may solve your boot issue.
My S4 broke and my friend lent me his GNote II in the meantime. I do not feel it is authentic. I am trying to root and flash a rom to improve performance but when i try to enter download mode with Volume Down, Home and Power but when I do , it takes me to Android System Recovery 3e and I can't even choose anything like i usually can when I press power. Power does nothing and home removes the menu. Any ideas?
Idkwts said:
My S4 broke and my friend lent me his GNote II in the meantime. I do not feel it is authentic. I am trying to root and flash a rom to improve performance but when i try to enter download mode with Volume Down, Home and Power but when I do , it takes me to Android System Recovery 3e and I can't even choose anything like i usually can when I press power. Power does nothing and home removes the menu. Any ideas?
Click to expand...
Click to collapse
Method 1 -
Does it give you 3 options to choose from (in download mode)
1) normal
2) fast boot
3) recovery mode
If so, yes I am pretty sure that this is fake/clone samsung note II.
Method 2 - via IMEI number
you can check IMEI number www.imei.info for some fake/clone phones you will noticed that it will show Nokia or some other company.
Method 3 - via Samsung Kies
Connect your phone to your PC and if samsung Kies does not detect it, then it may be fake/clone.
Hopefully, this will work for you as it did worked for me in identifying fake/clone samsung note 3.
A_youu said:
Method 1 -
Does it give you 3 options to choose from (in download mode)
1) normal
2) fast boot
3) recovery mode
If so, yes I am pretty sure that this is fake/clone samsung note II.
Method 2 - via IMEI number
you can check IMEI number www.imei.info for some fake/clone phones you will noticed that it will show Nokia or some other company.
Method 3 - via Samsung Kies
Connect your phone to your PC and if samsung Kies does not detect it, then it may be fake/clone.
Hopefully, this will work for you as it did worked for me in identifying fake/clone samsung note 3.
Click to expand...
Click to collapse
If it is a fake or clone, am I unable to root ?
Its not fake -- that is the stock recovery for all Samsung phones. You need to root using chainfires kernel, then flash a custom recovery. Both of these procedures involve a PC and Odin software. Everything is spelled out in several threads.
Yeah just read the stickies man
.odin takes 5 minutes to download and root.
you sure your holding down volume? Up volume is recovery down is download.
Power off phone. Then hold vol down, home, and power. Once you see logo release ONLY the power while still holding down and homs.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Few days ago i flashed the Twrp recovery and yesterday i decided to remove it. I locked OEM and it bricked(take a loot at the picture).
The problem is that i can't enter in download mode since i bought it. To flash TWRP, I had to use adb command to reboot the tablet in download mode, but now, bricked, there is no way to use adb.
I had many Samsung devices, so i know how to enter in download mode , in this case power volume + volume -.
Does anyone know some kind of software that when you connect tablet with PC, tablet will enter in download mode?
I think that warranty is voided, so i just don't want to go to a samsung service center.
The picture: https://1drv.ms/u/s!Aitd6zSfsnM-gcghBLfHxmBH1vQ5CQ
jinglei207 said:
Few days ago i flashed the Twrp recovery and yesterday i decided to remove it. I locked OEM and it bricked(take a loot at the picture).
The problem is that i can't enter in download mode since i bought it. To flash TWRP, I had to use adb command to reboot the tablet in download mode, but now, bricked, there is no way to use adb.
I had many Samsung devices, so i know how to enter in download mode , in this case power volume + volume -.
Does any know some kind of software that when you connect tablet with PC, tablet will enter in download mode?
I think that warranty is voided, so i just don't want to go to a samsung service center.
The picture: https://1drv.ms/u/s!Aitd6zSfsnM-gcghBLfHxmBH1vQ5CQ
Click to expand...
Click to collapse
You forgot to unlock OEM vin dev mode indeed. The only way to get ride about it is to reinstall stock with Odin. I'm really surprised you can't natively go in download mode with hardware buttons. Have you also tried with buttons with your tab connected to an electrical plug?
You can't enter recovery mode either?
Kholargol said:
You forgot to unlock OEM vin dev mode indeed. The only way to get ride about it is to reinstall stock with Odin. I'm really surprised you can't natively go in download mode with hardware buttons. Have you also tried with buttons with your tab connected to an electrical plug?
You can't enter recovery mode either?
Click to expand...
Click to collapse
yes, i have tried many times. Those Volume buttons work in system.
Kholargol said:
You forgot to unlock OEM vin dev mode indeed. The only way to get ride about it is to reinstall stock with Odin. I'm really surprised you can't natively go in download mode with hardware buttons. Have you also tried with buttons with your tab connected to an electrical plug?
You can't enter recovery mode either?
Click to expand...
Click to collapse
I don't know why but after i tried with cmd with "fastboot reboot", i am able to use 3 buttons to enter into download mode. Thank you any way.
Good thing. I advise you to use Samfirm.exe to get the file to flash with Odin. It's depreciated but still works 100% fine.
Hello, I had the problem similar to yours. in practice I have an unlocked OEM S4 tab and Magisk 18.0 installed come on, only that my problem was that I suddenly used the device my device lost the root rights. Then I restarted and reinstalled with TWRP Magisk 18 I restarted in System and everything was ok! yesterday I started reading my message (photos you uploaded on OneDrive) How did you solve it? I have read the discussion but I do not understand how you shave the command .. I see that I can not go into download mode or recovery mode, help me I'm not a newbie so just explain to me how did you use Fastboot? Thanks again
Kholargol said:
Good thing. I advise you to use Samfirm.exe to get the file to flash with Odin. It's depreciated but still works 100% fine.
Click to expand...
Click to collapse
My tab wont go into download mode or recovery yet it makes noises but no display so i dont know if im in download mode or not also what csc to choose in samfirm below the model number please. Thank you.
jack allen said:
My tab wont go into download mode or recovery yet it makes noises but no display so i dont know if im in download mode or not also what csc to choose in samfirm below the model number please. Thank you.
Click to expand...
Click to collapse
I "quite accidentally" discovered that the physical key combo of POWER + VOL UP + VOL DOWN got me out of the "Security Error ...) state and into Download mode and I could then flash a Stock ROM using Odin...oh my...what a panic I got into after trying for hours on end to get the device into Download...Smart Switch app couldn't detect the device at all for me to run a recovery...
Hello! Warning post for those who has r820 manufactured in august 2021 with stock firmware R820XXU1DUE3 tizen 5.5.0.2 After flashing combination COMBINATION-FT55_R820XXU1ATJ1 screen all black, no image at all, short vibrating when long press power button. Managed to blindly enter wireless odin mode and successfully unbricked it with flashing to stock 5.5.0.2 R820XXU1DUA3.
There is new type of display at least in watches that manufactured in august 2021. Older firmwares doesn't support this displays - that's why no image.
COMBINATION-FT55_R820XXU1AUE1 is working OK on august 2021 watches.
I have the same issue can any one help
fenderstrc said:
Hello! Warning post for those who has r820 manufactured in august 2021 with stock firmware R820XXU1DUE3 tizen 5.5.0.2 Have two r820 watches. First one after flashing with netodin to tizen 4 firmware became very strange brick - screen all black, no image at all, short vibrating when long press power button. Managed to blindly enter wireless odin mode and successfully unbricked it with flashing to 5.5.0.2 R820XXU1DUA3. The second one was flashed to combination COMBINATION-FT55_R820XXU1ATJ1 and has the same brick (black screen, vibrating on power button). But sadly i cannot enter it to wireless mode blindly by now. Any solutions please? Can we flash watch with cable and test points WITHOUT entering Wired Odin mode on the watch? Help please!
upd: New type of display at least in watches that manufactured in august 2021. Older firmwares doesn't support this displays - that's why no image.
COMBINATION-FT55_R820XXU1AUE1 is working OK on august 2021 watches.
Click to expand...
Click to collapse
How did u manage to unbrick the first watch and what did u do with 2nd watch
Nikkivizzz said:
How did u manage to unbrick the first watch and what did u do with 2nd watch
Click to expand...
Click to collapse
Watch is working, screen just doesn't show image. So you can try to enter "download wireless" mode blindly like you did it before no image. If you have combination then this mode is 5th line in menu. If you have stock this line is 3rd in the menu
Note that if you flashed tizen 4 over tizen 5 your wifi could be disabled and the only way to unbrick is to sold usb cable to pinouts on the main board and flash via regular odin mode.
Does COMBINATION-FT55_R820XXU1AUE1 this firmware really work on august 2021 watches ?
I have already bricked my new watch and applied for replacement. iam afraid to try it so if you have that combination firmware, please share it.
Pls help to solve the issue... I tried many times to enter download wireless mode... But i couldn't...
Pls some one help me
fenderstrc said:
Hello! Warning post for those who has r820 manufactured in august 2021 with stock firmware R820XXU1DUE3 tizen 5.5.0.2 Have two r820 watches. First one after flashing with netodin to tizen 4 firmware became very strange brick - screen all black, no image at all, short vibrating when long press power button. Managed to blindly enter wireless odin mode and successfully unbricked it with flashing to 5.5.0.2 R820XXU1DUA3. The second one was flashed to combination COMBINATION-FT55_R820XXU1ATJ1 and has the same brick (black screen, vibrating on power button). But sadly i cannot enter it to wireless mode blindly by now. Any solutions please? Can we flash watch with cable and test points WITHOUT entering Wired Odin mode on the watch? Help please!
upd: New type of display at least in watches that manufactured in august 2021. Older firmwares doesn't support this displays - that's why no image.
COMBINATION-FT55_R820XXU1AUE1 is working OK on august 2021 watches.
Click to expand...
Click to collapse
fenderstrc said:
Hello! Warning post for those who has r820 manufactured in august 2021 with stock firmware R820XXU1DUE3 tizen 5.5.0.2 Have two r820 watches. First one after flashing with netodin to tizen 4 firmware became very strange brick - screen all black, no image at all, short vibrating when long press power button. Managed to blindly enter wireless odin mode and successfully unbricked it with flashing to 5.5.0.2 R820XXU1DUA3. The second one was flashed to combination COMBINATION-FT55_R820XXU1ATJ1 and has the same brick (black screen, vibrating on power button). But sadly i cannot enter it to wireless mode blindly by now. Any solutions please? Can we flash watch with cable and test points WITHOUT entering Wired Odin mode on the watch? Help please!
upd: New type of display at least in watches that manufactured in august 2021. Older firmwares doesn't support this displays - that's why no image.
COMBINATION-FT55_R820XXU1AUE1 is working OK on august 2021 watches.
Click to expand...
Click to collapse
Brother do you have the combination file COMBINATION-FT55_R820XXU1AUE1 if you have the file plz send me.
fenderstrc said:
Hello! Warning post for those who has r820 manufactured in august 2021 with stock firmware R820XXU1DUE3 tizen 5.5.0.2 Have two r820 watches. First one after flashing with netodin to tizen 4 firmware became very strange brick - screen all black, no image at all, short vibrating when long press power button. Managed to blindly enter wireless odin mode and successfully unbricked it with flashing to 5.5.0.2 R820XXU1DUA3. The second one was flashed to combination COMBINATION-FT55_R820XXU1ATJ1 and has the same brick (black screen, vibrating on power button). But sadly i cannot enter it to wireless mode blindly by now. Any solutions please? Can we flash watch with cable and test points WITHOUT entering Wired Odin mode on the watch? Help please!
upd: New type of display at least in watches that manufactured in august 2021. Older firmwares doesn't support this displays - that's why no image.
COMBINATION-FT55_R820XXU1AUE1 is working OK on august 2021 watches.
Click to expand...
Click to collapse
Bro, how to enter wireless odin mode, mine is vibrating after long press. Please help me
Same issue here can anyone help
Hello, I have same problem after trying change region on R820 (august 2021 too) by downgrading tizen to 4 from stock
R820XXU1EUK2
Without picture on display I updated to COMBINATION-FT55_R820XXU1ATJ1 by Wireless Download with no effect, but after that I can't find Wireless Download mode and R820 Wif AP.
Now I connected with USB and Odin3 (latest 3.14.4) and blindly found 2 usb modes, in one of them trying flash
R820XXU1DUA3 (and any other)
It stuck on "Set Partition"
Changing Odin3 version to previous 3.13 gives no effect.
Now I haven't any ideas...
UPD. Solved by using short USB cable...
UPD2. COMBINATION-FT55_R820XXU1ATK1 breaks display too, do not use it
_CEBEP_ said:
Hello, I have same problem after trying change region on R820 (august 2021 too) by downgrading tizen to 4 from stock
R820XXU1EUK2
Without picture on display I updated to COMBINATION-FT55_R820XXU1ATJ1 by Wireless Download with no effect, but after that I can't find Wireless Download mode and R820 Wif AP.
Now I connected with USB and Odin3 (latest 3.14.4) and blindly found 2 usb modes, in one of them trying flash
R820XXU1DUA3 (and any other)
It stuck on "Set Partition"
Changing Odin3 version to previous 3.13 gives no effect.
Now I haven't any ideas...
UPD. Solved by using short USB cable...
UPD2. COMBINATION-FT55_R820XXU1ATK1 breaks display too, do not use it
Click to expand...
Click to collapse
Please share the process how u recovered using USB and some picture of the usb might help
Hi!
I did the same mistake and my watch is behaving the same as mentioned in the first post.
Please help me how can I go back to download mode blindly.
I am trying to get back to download mode since yesterday but no luck.
When I long press the power button, it vibrates and then after pressing multiple times trying to go into download mode.
Please help
Thanks @fenderstrc for confirming that the combination file: COMBINATION-FT55_R820XXU1AUE1 works. I managed to install it on my August manufactured GW Active2. After changing the CSC to BTU, I installed DUA3 firmware successfully without any issues. I did not get ECG and BP(anyway can be installed via Dante's techniques) but managed to get Samsung Pay which I really wanted. Still haven't got the latest EUK2 ota update though
Update: I managed to get the OTA to work by changing the region to XAR. Funny enough, after changing to XAR I got ECG,BP and Samsung Pay without any issues or mods
sagar271 said:
Does COMBINATION-FT55_R820XXU1AUE1 this firmware really work on august 2021 watches ?
I have already bricked my new watch and applied for replacement. iam afraid to try it so if you have that combination firmware, please share it.
Click to expand...
Click to collapse
Hello brother hope you are well brother have you got samsung pay in you galaxy watch active 2
My watch is R820, i wish to change my CSC from INU to another region for Samsung Pay. I would like to know the combination and stock firmware to be flashed in odin.
My watch is April 2021 manufactured and out of warranty.
Tizen : 5.5.2
version : R820XXU1EUK2
fenderstrc said:
Hello! Warning post for those who has r820 manufactured in august 2021 with stock firmware R820XXU1DUE3 tizen 5.5.0.2 After flashing combination COMBINATION-FT55_R820XXU1ATJ1 screen all black, no image at all, short vibrating when long press power button. Managed to blindly enter wireless odin mode and successfully unbricked it with flashing to stock 5.5.0.2 R820XXU1DUA3.
There is new type of display at least in watches that manufactured in august 2021. Older firmwares doesn't support this displays - that's why no image.
COMBINATION-FT55_R820XXU1AUE1 is working OK on august 2021 watches.
Click to expand...
Click to collapse
can you please provide the file
fenderstrc said:
Watch is working, screen just doesn't show image. So you can try to enter "download wireless" mode blindly like you did it before no image. If you have combination then this mode is 5th line in menu. If you have stock this line is 3rd in the menu
Note that if you flashed tizen 4 over tizen 5 your wifi could be disabled and the only way to unbrick is to sold usb cable to pinouts on the main board and flash via regular odin mode.
Click to expand...
Click to collapse
Thank you fenderstrc for the info. COMBINATION-FT55_R820XXU1ATK1 and no screen. Sorry for bothering, but I am trying to fix it, but no success. How can I tell if the watch is turned on or off? Does it matter if I want to enter Reboot mode? Do I need to press both buttons to enter Reboot Mode as in the video? If it shortly vibrates, does it mean it is restarting? How long should I wait before I press the power button 5 time to enter Download wireless mode? After long pressing to select Download wireless mode, should I press the power button twice to enter AP mode as in the video?
Can you please help me with these? Maybe upload a video with these stepes with the watch screen on?
Thank you,
Joseph
hegedusj said:
Thank you fenderstrc for the info. COMBINATION-FT55_R820XXU1ATK1 and no screen. Sorry for bothering, but I am trying to fix it, but no success. How can I tell if the watch is turned on or off? Does it matter if I want to enter Reboot mode? Do I need to press both buttons to enter Reboot Mode as in the video? If it shortly vibrates, does it mean it is restarting? How long should I wait before I press the power button 5 time to enter Download wireless mode? After long pressing to select Download wireless mode, should I press the power button twice to enter AP mode as in the video?
Can you please help me with these? Maybe upload a video with these stepes with the watch screen on?
Thank you,
Joseph
Click to expand...
Click to collapse
Hi any update on this i am also trying to do it blindly but no luck
.