Develop Bugs

P6-U06 Common Issues And Fixes

I will try and list some common problems and fixes for the P6
Part 1 Tools
Make Sure You have the following software:
Adb/fastboot driver :
http://adbdriver.com/upload/AdbDriverInstaller.exe
Minimal ADB and Fastboot : https://docs.google.com/file/d/0B1S0LCuXCnnmSWh6NGJmSE1BUWc/edit
bokchoi2020's Huawei Toolkit:
http://www.androidfilehost.com/?fid=23501681358539086
(credits to respective dev's)

Part 2
Part 2
Connection Issues: Here are a few examples
Adb keeps saying adb waiting-on-device
Device manager says unknown device,
Just shows an error next to the p6's name.
If fast-boot, or your phone managing app doesn't pick up the phone.
Possible Fixes
Check if the cable is still in a good condition
Try a different usb port especially if you are using usb 3 ports
Make sure usb-debugging is turned on(to do so goto settings>developer options>usb debugging) (if developer options is missing goto about phone>tap on build number multiple times to enable it)
Try to install drivers the linked to in the thread or try these ones that Snoop05 made
Try Rebooting your PC, and Or phone
If you are having issues with adb or fastboot make sure you have the correct driver installed(control panel>administrative tools>Computer management>device manager

Part 3
Boot loop​
Possible fixes:
Method 1 (only applicable if you already had a custom recovery before bootloop)
If you have a custom recovery installed like twrp, reboot into recovery by>holding pwr+vol up+vol down until it reboots and loads recovery. then Format The following:
System
Cache
Dalvik Cache
Cust
Data
Then try to install a rom. you can find some here XDA during its install format the above mentioned again but do not format internal or external memory. or you can install the new B5x firmware's which are very stable and have little to no problems
Method 2 (if you had stock recovery before bootloop)
Download http://www.androidfilehost.com/?fid=23329332407572611 then
Put the img folder in your adb directory(if you use the provided adb software it should be (x64 bit- C:\Program Files (x86)\Minimal ADB and Fastboot ) (x86 bit C:\Program Files\Minimal ADB and Fastboot) then>
Reboot into recovery by>holding pwr+vol up+vol down until it reboots and loads recovery> then
On your computer use the minimal adb then
type
adb reboot bootloader
fastboot flash recovery.img
fastboot reboot recovery
Then follow instructions of method 1
Also Possibility 3 (Could be that the rom you are trying to use is corrupt or that it is missing files so try a different one

[RECOVERIES & ROOT] Yureka custom recoveries & Root without Changing Stock Recovery

[RECOVERIES & ROOT] Yureka custom recoveries & Root without Changing Stock Recovery
Note : This tutorial is for YU Yureka based on CM11 (KK 4.4.4) 32bit architecture
and
do it on your own risk, I will not be responsible if you brick your phone
Here is the detailed guide and collection of stock and all custom recoveries for YU Yureka and detailed guide to Root YU Yureka without changing Stock Recovery
Requirements
1. YU Yureka (obviously) with USB Data cable
2. PC / Laptop (Having Windows installed at least Windows 7 or above)
3. Drivers (Windows Automatically detect and install the required drivers)
4. ADB & Fastboot binary package that can be downloaded from XDA 15 seconds ADB Installer v1.4.2']http://forum.xda-developers.com/showthread.php?t=2588979
5. Custom Recovery (Anyone in which you are interested CWM, PhiZ, TWRP)
6. Latest SuperSU.zip file to root your phone
Warning: This process may delete all data stored in internal storage so better backup all the files stored in internal storage.
Step One
Enable USB Debugging on your device you can just follow these steps:
Go to Settings> About phone and keep taping on build number at least 7 times or till it appears "You are a developer now",
Now again go to settings>developer option (only after the previous step it will be enabled)> check/select USB debugging.
Step Two
Unlock your bootloader to flash custom recovery and root.
Here is the process
1. Download the adb & fastboot binary package and install it.
2. Put your phone into FASTBOOT mode by following anyone from below methods :
Method 1 (easiest)
-------------------
a. Power down phone
b. Plug USB cable to your PC
c. Press and hold Vol Up button and plug other end of USB to your device, soon you will see the fastboot screen.
(or without plugging USB Cable, Press and Hold Power and Vol Up buttons simultaneously, until you see the screen
"FASTBOOT MODE"
Method 2
---------
a. While your phone is Power On, plug USB Data Cable with PC and Phone (USB Debuging must be Enable)
b. Open Command Prompt on your PC (with Administartor rights) and type the following command
adb -s 0x1ebf devices
You will get results something like that :
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
3a289c2 device
*Note : If you get "authorization message" then look on your mobile screen and authorize your PC and run the command again.
c. Now note down the device no. (for e.g. in above "3a289c2") and type the following command
adb -s 3a289c2 reboot bootloader
[*Note replace the device id with your id (here 3a289c2), that you got in last command]
Now your phone must be booted into fastboot mode. A screen with "Fastboot Mode" should be appear on your phone.
3. Device drivers will get installed by windows (please wait for the driver installation to complete)
4. After driver installation is done go to the folder where you have extracted the package
5. Now open elevated DOS command prompt (terminal) on your PC and go into the same folder where you saved the recovery file
(*Note : to start command prompt directly from desired folder, while holding the Shift Key Right Click on folder and select start "open command window here")
6. Type the following command to check if the device was detected in fastboot mode
fastboot -i 0x1ebf devices
you should get output like : 2a25d00 fastboot
if you don't get similar output it means that the drivers weren't correctly installed or the device wasn't connected properly
7. If the output is similar to above then run the following command:
fastboot -i 0x1ebf oem unlock
you should get output something like :
.....
OKAY [ 0.003s]
finished. total time: 0.004s
8. Now your bootloader is now unlocked.
*Note : if you want to re-lock your bootloader again (for warranty on any other reason), again boot into fastboot mode and this time type the following command and enter
fastboot -i 0x1ebf oem lock
Step Three
Boot your phone into recovery (temporarily or permanently) and root your phone
1. Download SuperSU.zip and put it on root of your internal or external SD card
2. To load custom recovery (CWM / TWRP / PhiZ) temporarily, now type this command in terminal :
fastboot -i 0x1ebf boot CWM_6.0.5.1_recovery-yu.img
*Note 1 : if you want to flash the custom recovery permanently then us the following command
fastboot -i 0x1ebf flash CWM_6.0.5.1_recovery-yu.img
*Note 2 : if your download custom recovery is named differently (here CWM_6.0.5.1_recovery-yu.img) then while writing the above commands you need to put the name of the recovery same as as your saved file name (anyone CWM / Phiz / TWRP)
3. Done ! You loaded custom recovery temporarily, if command used with "boot" hence to root your phone, proceed to next section (step 5).
or
If you flashed recovery permanently, using command with "flash" then boot your phone into recovery. To do so, you have Two options
i) type the following command and press enter : adb -s 3a289c2 reboot recovery
or
ii) power off your phone, after then press and hold "Vol up+ Vol down + Power" buttons simultaneously to boot into custom recovery.
Now to root your phone proceed with next section (step 5).
Root your phone
5. To gain root access, flash SuperSu.zip that is stored on your internal or external SD card (in step 1)
6. Choose reboot phone and enjoy rooted phone with stock or custom recovery !
Special Note 1
I didn't tested, but came to know that root doesn't effect OTA update on Yureka.
You can get OTA updates with root but after the OTA update is flashed you will loose root access. To keep it or to avoid this please go to System Settings -> Developer Options -> UNTICK -"Update CM Recovery" (update recovery while installing system updates)
Even though if someone want to go back to Stock recovery, then download the official stock recovery (link no. 6 above) and flash it using command in fastboot mode (second command in step 2 under head "STEP THREE")
Downloads
1. 15 seconds ADB Installer v1.4.2 http://forum.xda-developers.com/showthread.php?t=2588979
2. Super SU latest v2.46 http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
3. CWM 6.0.5.1 https://s.basketbuild.com/devs/vishal_android_freak/yu/yureka
OR http://d-h.st/ElAe
4. PhilZTouch 6.59 based on CWM v6.0.5.1 http://www.androiddevs.net/downloads/
OR http://d-h.st/UqWK
5. TWRP 2.8.5.0 http://techerrata.com/browse/twrp2/tomato
OR https://www.androidfilehost.com/?fid=95916177934528156
OR http://d-h.st/5wDD
6. YU Yureka Official Stock Recovery http://d-h.st/tQ1k
Special Note 2
Without the vendor id, phone will not get detected in fastboot mode.
Like if you want to check fastboot type this :
fastboot -i 0x1ebf devices
therefore, always add "i -0x1ebf" after fastboot and then write your command

aabidhashmi said:
Here is is collection of all custom recoveries for YU Yureka and detailed guide to Root YU Yureka without changing Stock Recovery
Requirements
1. YU Yureka (obviously) with USB Data cable
2. PC / Laptop (Having Windows installed at least Windows 7 or above)
3. Drivers (Windows Automatically detect and install the required drivers)
4. ADB & Fastboot binary package that can be downloaded from XDA 15 seconds ADB Installer v1.4.2']http://forum.xda-developers.com/showthread.php?t=2588979
5. Custom Recovery (Anyone in which you are interested CWM, PhiZ, TWRP)
6. Latest SuperSU.zip file to root your phone
Warning: This process may delete all data stored in internal storage so better backup all the files stored in internal storage.
Step One
Enable USB Debugging on your device you can just follow these steps:
Go to Settings> About phone and keep taping on build number at least 7 times or till it appears "You are a developer now",
Now again go to settings>developer option (only after the previous step it will be enabled)> check/select USB debugging.
Step Two
Unlock your bootloader to flash custom recovery and root.
Here is the process
1. Download the adb & fastboot binary package and install it.
2. Power down phone
3. Plug USB cable to your PC
4. Press and hold Vol Up button and plug other end of USB to your device, soon you will see the fastboot screen.
(or without plugging USB Cable, Press and Hold Power and Vol Up buttons simultaneously, until you see the screen
"FASTBOOT MODE"
5. Device drivers will get installed by windows (please wait for the driver installation to complete)
6. After driver installation is done go to the folder where you have extracted the package
7. Now open elevated DOS command prompt (terminal) on your PC and go into the same folder where you saved the recovery file
* to start command prompt directly from desired folder, while holding the Shift Key Right Click on folder and select start "open command window here"
8. Type the following command to check if the device was detected in fastboot mode
fastboot -i 0x1ebf devices
you should get output like : 2a25d00 fastboot
if you don't get similar output it means that the drivers weren't correctly installed or the device wasn't connected properly
9. If the output is similar to above then run the following command:
fastboot -i 0x1ebf oem unlock
you should get output something like :
.....
OKAY [ 0.003s]
finished. total time: 0.004s
10. Now your bootloader is now unlocked.
Step Three
Root your phone without changing your stock recovery
1. Download SuperSU.zip and put it on root of your internal or external SD card
2. To load custom recovery (CWM / TWRP / PhiZ) temporarily, now type this command in terminal :
fastboot -i 0x1ebf boot recovery CWM_6.0.5.1_recovery-yu.img
*Note : if your download custom recovery is named differently (here CWM_6.0.5.1_recovery-yu.img) then while writing the above command you need to put the name of the recovery same as as your saved file name (anyone CWM / Phiz / TWRP)
Done ! You flashed custom recovery temporarily.
3. Now press and hold "Vol up+ Vol down + Power" buttons simultaneously to boot into custom recovery.
4. To gain root access flash SuperSu.zip that is stored on your internal or external SD card (in step 1)
5. Choose reboot phone and enjoy rooted phone without changing stock recovery !
Downloads
1. 15 seconds ADB Installer v1.4.2 http://forum.xda-developers.com/showthread.php?t=2588979
2. Super SU latest v2.46 http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
3. CWM 6.0.5.1 https://s.basketbuild.com/devs/vishal_android_freak/yu/yureka
OR http://d-h.st/ElAe
4. PhilZTouch 6.59 based on CWM v6.0.5.1 http://www.androiddevs.net/downloads/
OR http://d-h.st/UqWK
5. TWRP 2.8.5.0 http://techerrata.com/browse/twrp2/tomato
OR https://www.androidfilehost.com/?fid=95916177934528156
OR http://d-h.st/5wDD
Special Note
Without the vendor id, phone will not get detected in fastboot mode.
Like if you want to check fastboot type this :
fastboot -i 0x1ebf devices
therefore, always add "i -0x1ebf" after fastboot and then write your command
Click to expand...
Click to collapse
Few errors noted:
1. You can't say flashing recovery when you are booting it.
2. In step 3 point 3 is not valid because when your command is to boot it will automatically boot into recovery you need not use combination keys.
3. Last point vender id is wrong !!!
Few suggestions:
1. It feels like you have not tested this by yourself
2. There is already a guide for "rooting without flashing recovery". Search before posting.
Regards
aashking

aashking said:
Few errors noted:
1. You can't say flashing recovery when you are booting it.
2. In step 3 point 3 is not valid because when your command is to boot it will automatically boot into recovery you need not use combination keys.
3. Last point vender id is wrong !!!
Few suggestions:
1. It feels like you have not tested this by yourself
2. There is already a guide for "rooting without flashing recovery". Search before posting.
Regards
aashking
Click to expand...
Click to collapse
Dear aaskking
Thanks to inform. Here is the corrections
1 & 2 - Tutorial updated with "boot" and "flash" commands separately.
3 + Vendor ID is correct nothing wrong in it.
4 - I already tested all those procedures and commands. I never post anything without testing.
5 - Yes, I also seen that available guide, but that is not so much detailed and also required files links are not provided.
Anyway, thanks for your suggestions.

aabidhashmi said:
Dear aaskking
Thanks to inform. Here is the corrections
1 & 2 - Tutorial updated with "boot" and "flash" commands separately.
3 + Vendor ID is correct nothing wrong in it.
4 - I already tested all those procedures and commands. I never post anything without testing.
5 - Yes, I also seen that available guide, but that is not so much detailed and also required files links are not provided.
Anyway, thanks for your suggestions.
Click to expand...
Click to collapse
EDIT : You can get OTA updates with root..
After the update is flashed you will loose root access ..
To keep it or to avoid this please write the following step
STEP) In Developer Option UNTICK -"Update CM Recovery".
That's it.. Cheers mate wonderful thread.. @aabidhashmi @aashking

arjunsingh1000 said:
EDIT : You can get OTA updates with root..
After the update is flashed you will loose root access ..
To keep it or to avoid this please write the following step
STEP) In Developer Option UNTICK -"Update CM Recovery".
That's it.. Cheers mate wonderful thread.. @aabidhashmi @aashking
Click to expand...
Click to collapse
Thanks Arjun Singh @arjunsingh1000 for suggestion and appreciation
Post updated ...

aabidhashmi said:
Thanks Arjun Singh @arjunsingh1000 for suggestion and appreciation
Post updated ...
Click to expand...
Click to collapse
Great mate cheers just checked and tried that ota updates are available and work.. On stock recovery... Locked bootloader and with root..
Achieved this by downgrading to the very first cm11 firmware and got then rooted it and locked the bootloader then I just booted it and got the incremental update .. Downloaded and flashed .. Works perfectly.. Root not lost due to the untick in dev options..

Thanks again Arjun Singh, for confirming OTA updates are working.
I am already on Stock ROM & recovery {rooted} and tried the same procedure {locked the bootloader}, but no updates for me.
Is updates are really there, or something wrong with me ?
Sent from my AO5510 using Tapatalk

I am simply unable to get the device listed in command prompt after fastboot mode is enabled. my phone has option to boot into fastboot mode in power options. i tried that option, i tried using command to boot into fastboot. But somehow, when phone is in fastboot mode, it does not get detected by fastboot application (even though windows installs drivers successfully).
I have tried 3 different laptops. All had same problem. No idea how to solve this.

aabidhashmi said:
Thanks again Arjun Singh, for confirming OTA updates are working.
I am already on Stock ROM & recovery {rooted} and tried the same procedure {locked the bootloader}, but no updates for me.
Is updates are really there, or something wrong with me ?
Sent from my AO5510 using Tapatalk
Click to expand...
Click to collapse
Well I guess you are on the latest build XN0PHQ I guess? Another beta update was made but not rolled out it is um XNPH08P I know its a little late but just in case you don't know..
---------- Post added at 05:30 PM ---------- Previous post was at 05:28 PM ----------
jitendragarg said:
I am simply unable to get the device listed in command prompt after fastboot mode is enabled. my phone has option to boot into fastboot mode in power options. i tried that option, i tried using command to boot into fastboot. But somehow, when phone is in fastboot mode, it does not get detected by fastboot application (even though windows installs drivers successfully).
I have tried 3 different laptops. All had same problem. No idea how to solve this.
Click to expand...
Click to collapse
Ahahahaah... I know just the way... Do not reboot via adb ...
Switch off your phone remove your battery and put it back in do not turn it on.. But connect your USB cable and at the same time hold the power up or maybe down button .. Voila your in fastboot which will get detected .. Don't forget to use the vendor id.

arjunsingh1000 said:
Ahahahaah... I know just the way... Do not reboot via adb ...
Switch off your phone remove your battery and put it back in do not turn it on.. But connect your USB cable and at the same time hold the power up or maybe down button .. Voila your in fastboot which will get detected .. Don't forget to use the vendor id.
Click to expand...
Click to collapse
I tried this method but phone does not get detected in fastboot mode at all. I have drivers installed for all different modes I connect my phone as. No luck at all.
Also, weird thing is, I have an option to directly go to fastboot mode from the power menu.

Jitendra Garg
Your driver's are not installed
As there is no special drivers setup, so connect your PC with Internet then plug your phone and let Windows install drivers automatically.
Sent from my AO5510 using Tapatalk

[GUIDE] Unlocking bootloader and Rooting Micromax Q394

UNLOCKING BOOTLOADER:
a) Download Koush Universal adb driver from https://clockworkmod.com and adb setup.
b) Install the driver first and install adb after that.
c) Type n and press Enter when adb setup asks for installing drivers.
d) After the installation, run command prompt as administrator.
e) Open File explorer, and navigate to C:\adb
f) Please take backup of your data before proceeding further.
g) In C:\adb press Shift+right click and select Open Command Window here.
h) Enable USB debugging on your phone and connect your phone to pc using USB cable.
i) Type
Code:
adb devices
and press enter.
j) If it shows some device to be connected, only then proceed further.
k) Type
Code:
adb reboot bootloader
and press enter.
l) Phone will boot into fastboot mode.
m) Type
Code:
fastboot devices
and press enter.
n) If it shows some device to be connected, only then proceed further.
o) Type
Code:
fastboot oem unlock
and press enter.
p) On the phone screen, the phone will ask for confirmation to unlock bootloader.
Once fastboot shows "Success" or "Done" or something else signifying that the command was successful, type
Code:
fastboot reboot
and press enter.
q) Your phone will reboot normally.
Congrats, you have successfully unlocked bootloader.
ROOTING:
1. For Dr. Fone - Root:
a) Download and install Dr. Fone - Root on your PC.
b) Enable USB debugging on your phone.
c) Open Dr. Fone - Root and select Root option.
d) Connect your phone to your PC with USB cable.
e) Dr. Fone - Root will detect your phone in a few minutes.
f) Click "Root" button and wait.
Congrats, you have a rooted phone now.
2. For Magisk:
You'll find instructions to install Magisk over here.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
3.Through TWRP:
a) Download SuperSU.zip or Magisk.zip
SuperSU link:
http://download.chainfire.eu/696/supersu/
THIS IS A LINK FOR AN OLDER VERSION OF SUPERSU SINCE supersu.com IS SHOWING DOWNLOAD ERRORS.
Magisk link:
Given in method 2 of rooting.
b) Download and flash TWRP from this thread, instructions have been provided in the thread for flashing it:
https://forum.xda-developers.com/ca...nofficial-twrp-3-2-3-micromax-canvas-t3833332
c) Boot into TWRP.
d) Select "Install" option.
e) In the File Manager that opens, select the zip you want to flash.
f) Follow the instructions on the screen.
g) Select "Reboot System"
Congrats, you have a rooted phone now.
Note: Kingoroot used to work before but it only provides temporary root now. Once you reboot, you lose root.
HIT THANKS IF FOUND USEFUL

mali_ said:
Any custom rom for this phone?
Click to expand...
Click to collapse
Not yet

mali_ said:
Is there an official stock firmware download link or just the thirdparty links?
Click to expand...
Click to collapse
androidmtk.com provides official firmware

mali_ said:
Magisk works on this?
What are the safe to remove apps?
Click to expand...
Click to collapse
Yes, Magisk works on this. I am using it right now.
You can uninstall any app you want without any side effects as long as the app is not an essential part of system.
For example, Firsttouch Launcher, Swiftkey Keyboard, Email, Amazon Kindle, App Center, App Bazaar, Chaatz, Hangouts etc.
You can use Debloater.
It is a magisk module you can use by terminal emulator to remove bloatware.
HIT THANKS IF FOUND USEFUL

if device doesn't show anything after writing fastboot devices command what is to be done...???

Masumilicioz said:
if device doesn't show anything after writing fastboot devices command what is to be done...???
Click to expand...
Click to collapse
Have you installed the drivers I mentioned or some other ones?
Btw, are you running adb and fastboot in Windows or Linux?

Thanks You for this post.

WHen I get to step "K" the device simply reboots fully back into normal OS
then further steps are not recognized if I do not keep putting "adb" in front
like it will not recognize fastboot devices
but it will recognize "adb fastboot devices"
---------- Post added at 08:15 AM ---------- Previous post was at 08:13 AM ----------
Not sure if I got the adb drivers right because I did not see any "koushes adb" I mesn the site was clearly koushes but no where did I see a download names or called "koushes adb" Am I missing something?

protomind said:
WHen I get to step "K" the device simply reboots fully back into normal OS
then further steps are not recognized if I do not keep putting "adb" in front
like it will not recognize fastboot devices
but it will recognize "adb fastboot devices"
---------- Post added at 08:15 AM ---------- Previous post was at 08:13 AM ----------
Not sure if I got the adb drivers right because I did not see any "koushes adb" I mesn the site was clearly koushes but no where did I see a download names or called "koushes adb" Am I missing something?
Click to expand...
Click to collapse
You can get adb from SDK Tools from
https://developer.android.com/studio/ and Universal ADB Drivers from https://clockworkmod.com

I got TWRP recovery installed created by you. Big thanks !
I'm having issues in installing magisk via zip as well as patched boot image. Was the process smooth for you?

I got it to work by editing boot.img.
Are you working on any custom rom ?
Do you have any roms which can be ported to Q394 ?

Ashishoswal said:
I got TWRP recovery installed created by you. Big thanks !
I'm having issues in installing magisk via zip as well as patched boot image. Was the process smooth for you?
Click to expand...
Click to collapse
Yes, there were no problems at all.
Tell me the problem in detail so that I would be able to help.

Augustoandro said:
Yes, there were no problems at all.
Tell me the problem in detail so that I would be able to help.
Click to expand...
Click to collapse
Solved by changing some values in default boot image.
Are you working on any custom rom for this device ?

Ashishoswal said:
Solved by changing some values in default boot image.
Are you working on any custom rom for this device ?
Click to expand...
Click to collapse
I am working on creating a device tree first, but it will take some time.

Im not a developer but if there's any task which can be done by following a guide, and is helpful for you then let me know. I will be glad to help you.

Total Nub's guide to rooting Qmobile Q Infinity & Micromax Canvas Inifinity

After failing some 1-click rooting methods, for the first time I tried to do it the hard way.
That turned out to be a pretty easy way thanks to some handy links to drivers and other files I found.
Infinity thanks to the thread I found platform-tools from and the website called "getdroidtips" for the Custom TWRP for the HS2.
NOTE: THIS GUIDE WILL WIPE YOUR DEVICE SO BE PREPARED
Standard warning: FOLLOW THIS GUIDE AT YOUR OWN RISK. REMEMBER, AS PER MY NAME I AM A TOTAL NUB. I DO NOT TAKE RESPONSIBILITY FOR YOUR PHONE MALFUNCTIONING, BRICKING, BLOWING UP OR DROWNING IN COOKING OIL (rip my Elephone S7)
Pastebin code for missing links: F2RGqM1A
1) Preparation
Download the latest Flashable.Zip from [ ]
Place SuperSu.zip in your sd card or internal storage
Enable Developer Options by going to Settings -> "About Phone" -> Click "Software Version" 7-8 times
Go to developer Options in Settings
Enable OEM Unlocking
Enable USB Debugging
Shutdown your phone by holding the power button
Boot into fastboot by holding the Volume Up key + Power Button
Press Volume Down key to get into fastboot
2) On your Windows PC:
Download the file from [ ] and extract the platform-tools folder (I extract to "D:\Downloads" in this example)
Download the Custom TWRP from [ ] and place it inside the platform-tools folder
Connect your device to your computer
press Win+R, type cmd and press enter
2.1) (not always needed)
If your device won't connect or the steps below don't work, try updating drivers:
Connect your phone while it's in fastboot
open start menu, search and open Device Manager
check inside Portable Devices or Android Devices for your phone's name
or look for Android Bootloader Interface
if it's not there, it might be named something else, with an icon that has a yellow triangle inside it.
Right click it, Update Driver
> Browse my computer for driver software
> Let me pick from a list of available drivers on my computer
> select Android Bootloader Interface
to check if you are connected, type "fastboot devices" in cmd and you'll see a device code
3) Unlocking Bootloader
In cmd, enter the following commands:
Code:
D:
cd D:\Downloads\platform-tools
fastboot oem unlock-go
THIS STEP WILL WIPE YOUR DEVICE DATA
wait for restart
4) Booting into TWRP
Go to device Settings again and ensure OEM Unlocking and USB Debugging are still Enabled. Reboot into fastboot.
In cmd:
Code:
fastboot boot twrp-3.1.1-0-20171128-UNOFFICIAL-HS2.img
(In case above cmd line doesn't work, type "fastboot boot twrp" and press Tab)
5) Backing up your rom and data (Optional but recommended)
Inside TWRP, Click Backup, tick everything, select desired directory and swipe to backup.
Reboot and follow step 5 again if needed
6) Installing SuperSU with root privileges
Inside TWRP, Click Install and select SuperSU.zip
Swipe to install and reboot
Enjoy

Please port miui 9 or lineage os 15 for micromax canvas infinity hs2

NubbyMcNubNub said:
After failing some 1-click rooting methods, for the first time I tried to do it the hard way.
That turned out to be a pretty easy way thanks to some handy links to drivers and other files I found.
Infinity thanks to the thread I found platform-tools from and the website called "getdroidtips" for the Custom TWRP for the HS2.
NOTE: THIS GUIDE WILL WIPE YOUR DEVICE SO BE PREPARED
Standard warning: FOLLOW THIS GUIDE AT YOUR OWN RISK. REMEMBER, AS PER MY NAME I AM A TOTAL NUB. I DO NOT TAKE RESPONSIBILITY FOR YOUR PHONE MALFUNCTIONING, BRICKING, BLOWING UP OR DROWNING IN COOKING OIL (rip my Elephone S7)
Pastebin code for missing links: F2RGqM1A
1) Preparation
Download the latest Flashable.Zip from [ ]
Place SuperSu.zip in your sd card or internal storage
Enable Developer Options by going to Settings -> "About Phone" -> Click "Software Version" 7-8 times
Go to developer Options in Settings
Enable OEM Unlocking
Enable USB Debugging
Shutdown your phone by holding the power button
Boot into fastboot by holding the Volume Up key + Power Button
Press Volume Down key to get into fastboot
2) On your Windows PC:
Download the file from [ ] and extract the platform-tools folder (I extract to "D:\Downloads" in this example)
Download the Custom TWRP from [ ] and place it inside the platform-tools folder
Connect your device to your computer
press Win+R, type cmd and press enter
2.1) (not always needed)
If your device won't connect or the steps below don't work, try updating drivers:
Connect your phone while it's in fastboot
open start menu, search and open Device Manager
check inside Portable Devices or Android Devices for your phone's name
or look for Android Bootloader Interface
if it's not there, it might be named something else, with an icon that has a yellow triangle inside it.
Right click it, Update Driver
> Browse my computer for driver software
> Let me pick from a list of available drivers on my computer
> select Android Bootloader Interface
to check if you are connected, type "fastboot devices" in cmd and you'll see a device code
3) Unlocking Bootloader
In cmd, enter the following commands:
THIS STEP WILL WIPE YOUR DEVICE DATA
wait for restart
4) Booting into TWRP
Go to device Settings again and ensure OEM Unlocking and USB Debugging are still Enabled. Reboot into fastboot.
In cmd:
(In case above cmd line doesn't work, type "fastboot boot twrp" and press Tab)
5) Backing up your rom and data (Optional but recommended)
Inside TWRP, Click Backup, tick everything, select desired directory and swipe to backup.
Reboot and follow step 5 again if needed
6) Installing SuperSU with root privileges
Inside TWRP, Click Install and select SuperSU.zip
Swipe to install and reboot
Enjoy
Click to expand...
Click to collapse
Hi please help me, after flashing recovery my phone is on bootloop now, what do i do

Hem97 said:
Please port miui 9 or lineage os 15 for micromax canvas infinity hs2
Click to expand...
Click to collapse
I wish I could.
Sudhangshu said:
Hi please help me, after flashing recovery my phone is on bootloop now, what do i do
Click to expand...
Click to collapse
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)

NubbyMcNubNub said:
I wish I could.
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
Click to expand...
Click to collapse
Hi, "flashboot boot twrp" wasnt working at all, so i tried "flashboot flash twrp" and all i have is a bootloop. So after flashing recoveru i booted my phone to fastboot and run the command, " flashboot boot recovery recovery.img" where recovery is the custom recovery image and it booted into recovery. Then there is one more step to do that allowed me to finally boot into my os. Its working fine and i still have twrp installed on my phone
---------- Post added at 06:53 PM ---------- Previous post was at 06:49 PM ----------
NubbyMcNubNub said:
I wish I could.
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
Click to expand...
Click to collapse
Btw i dont find any pastebin links, im sorry im just a noob too..... Lol

Want custom rom for Qmobile Qinfinity
I want a custom rom for Qmobile Qinfinity.
Because its own rom lags and does not have full features. Please give the rom like lineage os,RR,Or Stock
Please Help?:good:

hi bro,recently i just buy a new phone which is micromax canvas infinity.i have rooted my phone successfully,but there are no custom roms available for this phone.can you develop any custom rom for this phone?that will be very helpful...

Simple LG K8 x240dsf Rooting guide

Preface​
We're following this guide https://topjohnwu.github.io/Magisk/install.html, specifically the Boot Image Patching section.
This guide is different because i'm not using berkantkz recovery, there are uses for it i know but i just needed root real quick, not ****ing around with the recovery partition.
Process works for EVERY phone out there but this guide is made for the one i'm using, here you can jump over a few steps as i'm giving you the patched boot image for the K8 x240dsf variant.
I'm giving instructions even if i shouldn't, mostly for me in case i forget but also for you so you can speed up the rooting process. That being said i know jack **** don't ask me stuff, also i'll get a stroke if you write like a robot that barfed random words into google translate.
Instructions:​Preparations:
1) PC: install LG drivers
2) PC: Install universal ADB (Thank you Clockworkmod team!)(https://adb.clockworkmod.com/)
3) download Magisk Manager (Thank you Magisk team!) https://github.com/topjohnwu/Magisk/releases
4) download Lg k8 x240dsf patched boot.img for magisk i made for you (Thank you...you!)
First stage:
1) Backup your ****
2) enable OEM unlock
3) enable USB debugging
4) plug the little ****er in your PC
5) pull up a console
6)
Code:
adb devices
HOLY F*CK WE'RE HACKING (no we f*cking aren't)
7) check your phone, authorize that sh*t
8)
Code:
adb reboot bootloader
Second stage:
1)
Code:
fastboot oem unlock
2) Mash that Volume UP key, motherf*cker (YOU WILL LOSE YOUR STUFF)
3) After it's done take the battery out and restart
4) Install Magisk Manager
5) enable USB debugging
6)
Code:
adb reboot bootloader
Unpack the zip file you just downloaded and flash it like your life depends on it
7)
Code:
fastboot flash boot /path/to/magisk_patched.img
Restart and you're done.