So my phone after updating from miui 10 to 11 did not go well as the update stopped around 60% and phone rebooted and now its stuck at logo. What would be your advice to fix this. Shall i flash using mi phone assistant or mi flash tool. Also if using mi assistant does the mi id need to be same as on the phone and if it does need to be same and i dont remember the id what should i do? Thanks
danishajaz said:
So my phone after updating from miui 10 to 11 did not go well as the update stopped around 60% and phone rebooted and now its stuck at logo. What would be your advice to fix this. Shall i flash using mi phone assistant or mi flash tool. Also if using mi assistant does the mi id need to be same as on the phone and if it does need to be same and i dont remember the id what should i do? Thanks
Click to expand...
Click to collapse
Is ur bootloader unlocked or locked
Sidgup1998 said:
Is ur bootloader unlocked or locked
Click to expand...
Click to collapse
It's locked
I m not sure whether Mi flash tool works on locked loader or not but Flash tool is the best way of fixing.
U can give Mi flash tool a try
Sidgup1998 said:
I m not sure whether Mi flash tool works on locked loader or not but Flash tool is the best way of fixing.
U can give Mi flash tool a try
Click to expand...
Click to collapse
Normally it asks for mi id which i dont have. Gonna give some other ways a try
MiFlash tool does not work on phones that are locked. In theory, flashing the phone with miflash after unlocking is the best way.
You can refer to this post to try to fix your phone:
https://c.mi.com/thread-2504118-1-0.html
Once it boot properly, link your Xiaomi account with your phone.
Then use miflash-unlock to unlock the bootloader of your phone.
It's recommended to do a "clean" flash using MiFlash after unlocking the bootloader.
Related
Hi,
I purchased Mi Mix 2 from China and installed the global ROM.
All was good until it was time to reset and handover.
After reset, the phone boots to MIUI 9 screen and asks to choose language after which the region.
The only region available would be China. When selected, it just bootloops on and on and on.
Unfortunately the bootloader is locked.
Steps tried -
1. Wipe Data and Reboot
May I know if there is a way to fix it without getting the phone apart?
ashh108 said:
Hi,
I purchased Mi Mix 2 from China and installed the global ROM.
All was good until it was time to reset and handover.
After reset, the phone boots to MIUI 9 screen and asks to choose language after which the region.
The only region available would be China. When selected, it just bootloops on and on and on.
Unfortunately the bootloader is locked.
Steps tried -
1. Wipe Data and Reboot
May I know if there is a way to fix it without getting the phone apart?
Click to expand...
Click to collapse
Go to MIUI forum for ur device download the mi flash tool and try to flash back to stock rom. They have all the instructions u need there. Good luck
Go to MIUI forum for ur device download the mi flash tool and try to flash back to st
letmeputdatipin said:
Go to MIUI forum for ur device download the mi flash tool and try to flash back to stock rom. They have all the instructions u need there. Good luck
Click to expand...
Click to collapse
I checked all and unfortunately most mention the test point method which involves opening the ceramic back.
Is there any other way to fix without opening device?
ashh108 said:
I checked all and unfortunately most mention the test point method which involves opening the ceramic back.
Is there any other way to fix without opening device?
Click to expand...
Click to collapse
U should not have to open the device to flash stock rom. All u need is a laptop.
letmeputdatipin said:
U should not have to open the device to flash stock rom. All u need is a laptop.
Click to expand...
Click to collapse
Hi letmeputdatipin,
After a lot of trying, I am still not able to flash stock ROM since either the bootloader is locked or the Mix2 not coming up in the account.
May I know if there is a way to reset the mix2 with locked bootloader and phone not registered in Mi account?
Hi I have a big problem with my Max 3.
I ulocked it and then I flashed it with the official Xiaomi Flash App and clicked the 'clean all and lock' button. Unfortunally I flashed a bad ROM.
Now I can only boot to recovery (This MIUI version can't be installed on this device) and Fastboot.
If I try to flash a ROM I see 'Erase not allowed in lock state'. I tried to unlock it with fastboot, I receive 'Token verify failed' I tried with Mi Unlock: My account is accepted and when I click Unlock
I have 'Current account is not bound to this device' But I can't bound it because i can't boot it!!
I would be very, very happy about a solution for this mess!!!
Thanks everyone who has i idea!
Use MiFlash tool, flash the fastboot version of latest global stable or beta rom on: https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
dinhvtai said:
Use MiFlash tool, flash the fastboot version of latest global stable or beta rom on: https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Click to expand...
Click to collapse
He already tried that. You can't use MiFlash with locked bootloader.
I am afraid you have bricked your phone. Unless you have an official Xiaomi servicecentre nearby.
mierlo420 said:
He already tried that. You can't use MiFlash with locked bootloader.
Click to expand...
Click to collapse
Are you sure?
I had exactly the same. Locked my device when flashing (!!!?) then error while flashing, format the phone and everything was gone, locked bootloader.
After a search of 2 months I found out it was possible to repair the phone.
You have to open your phone, not very hard..follow this video https://youtu.be/dYlKG3EcpHg
Then contact the guys from S-Unlock https://s-unlock.com. I did it too, and they are thrustworthy.
You have to test point your device, https://youtu.be/IYWItgq2f9E until the Quallcom driver appears in your devicelist.
Then contact S-Unlock via chat. It can take up to 2 hours before the respond. The service cost 25 dollar for installing new Rom.
They log in to your computer via Teamviewer, they install MiFlash and Rom.
They have a special restore account. Without this account your Max will never work again, no need to try.
For 25 dollar my Max3 is working again.
Hello guys.
I recently bought this phone and wanted to use netflix, but didn't allow me because it outdated and said it was not compatible with my phone. So I did a bit of research and found a post in "mi community" that said it was because phone had bootloader unlocked. The phone was new and I didn't change anything of it, but I found the bootloader was unlocked.
Installed fastboot and adb drivers, locked bootloader and got myself into a... Brick?
-I can still load into fastboot.
-If I turn on the phone, It tries to load android but loads Mi-Recovery 3.0 instead. Recovery also says "This MIUI version can't be installed on this device"
I'm so lost from this point, I need to know if there is a way to flash any rom, and which one do I need.
Thanks in advice
stuck on recovery
Most likely a chinese phone that came with global rom. If it came with global rom try flashing chinese rom and then unlocking bootloader and reflash global. Do not lock bootloader after flashing global.
toxiccat said:
Most likely a chinese phone that came with global rom. If it came with global rom try flashing chinese rom and then unlocking bootloader and reflash global. Do not lock bootloader after flashing global.
Click to expand...
Click to collapse
Thanks for your answer, that is exactly what I've.
The problem is I tried to flash a Chinese from but it always denie it. Tried to flash the last global rom and allows me to do it with the same program.
Not sure where I can get the official chinese rom or how to bypass the xiaomi protection.
Thanks for helping! Hope I can somehow do it
Locked bootloader
Try searching for tools below which might help.
Saki / XiaomiADBFastbootTools
XiaomiADBFastbootTools-6.5.1-Win
I had hard bricked mine and had to take back off and use EDL to revive.
toxiccat said:
Try searching for tools below which might help.
Saki / XiaomiADBFastbootTools
XiaomiADBFastbootTools-6.5.1-Win
I had hard bricked mine and had to take back off and use EDL to revive.
Click to expand...
Click to collapse
I don't find the way to reboot (via software) to EDL from fastboot, is still possible to access it by opening the phone?
Locked bootloader
23javi23 said:
I don't find the way to reboot (via software) to EDL from fastboot, is still possible to access it by opening the phone?
Click to expand...
Click to collapse
If you can flash global ROM. I think you just need to unlock bootloader and then flash China ROM once you have unlocked bootloader.
China ROM link below
https://xiaomifirmware.com/roms/latest-official-miui-roms-for-xiaomi-mi-max-3/
toxiccat said:
If you can flash global ROM. I think you just need to unlock bootloader and then flash China ROM once you have unlocked bootloader.
China ROM link below
https://xiaomifirmware.com/roms/latest-official-miui-roms-for-xiaomi-mi-max-3/
Click to expand...
Click to collapse
It lets me flash de global one, but when I try to do the same with chinese rom, it says the version is lower, so I can't "downgrade".
It's weird because according to version number, the global one was a few versions lower
Solved the issue
The same issue , i was also encountered , After Flashing with "Xiaomi_Mi_Max_3_V10.2.1.0.PEDMIXM_20190226.0000.00_Global_9.0" Mi Max 3 with the MiFlash20191206 tool , by default the tool used "Clear data and Lock".
The tool saying "Flashing" and my phone got rebooted and went to MI Recovery 3.0 and also i got the message as
"This MIUI version can't be installed on this device".
I am not clueless how to proceed. So downloaded the Chinese version and again i tried to flash with above tool. Now tool said that "Can't Erase Locked" phone.
So Now i connected to Miflash_unlock with fastboot and connected to mi account and again i unlocked the phone.
Now my phone automatically booted to the Global version.
So i hope the issue is selecting the option as "Clear data and lock" . We need to select only "Clear data" in the flash tool.
23javi23 said:
Hello guys.
I recently bought this phone and wanted to use netflix, but didn't allow me because it outdated and said it was not compatible with my phone. So I did a bit of research and found a post in "mi community" that said it was because phone had bootloader unlocked. The phone was new and I didn't change anything of it, but I found the bootloader was unlocked.
Installed fastboot and adb drivers, locked bootloader and got myself into a... Brick?
-I can still load into fastboot.
-If I turn on the phone, It tries to load android but loads Mi-Recovery 3.0 instead. Recovery also says "This MIUI version can't be installed on this device"
I'm so lost from this point, I need to know if there is a way to flash any rom, and which one do I need.
Thanks in advice
Click to expand...
Click to collapse
Hi there,
I encountered the same issue. I tried to flash some CN Rom without enough research, without knowing that you can't just flash an Android 10 rom from 9 directly by recovery (even TWRP). So I ended up Fastboot or TWRP but never able to boot into system. Fortunately I didn't flash my Max3 by fastboot rushly, so my phone was still unlocked.
This is how I solved it:
1. Download an official CN ROM (the below I used is MIUI 11 with Android 9.9.x);
I can't post link here but search "miui通过线刷升级" - you shall see a miui.com link ending with shuaji-393.html. That's the page I download the Mi Max3 ROM from.
2. Use MiFlash to flash the official ROM with the flash option "clean all", NOT "clean All and lock";
3. The phone shall reboot into system, give it 5-10 minutes;
4. Flash the miui.eu ROM you like (DO make sure it is Android 9 tho) by recovery (tutorial given under every official xiaomi.eu ROM download).
Again it's easy to search
It took me less than an hour to do it (I don't have much experience with new XiaoMi phone). So don't worry about bricking your phone forever.
Hope it helps to destress
Hi guys. I need some help too because I'm not totally sure what I have to do here so if anyone can give me some tips I would appreciate it.
I just ordered the 128gb 6gb ram version of Mi Max 3 and it might come with the global rom and already unlocked. Should I use the Mi flash tool to install the file MIUI 11 V11.0.3.0.PEDCNXM android 9 fastboot file? then after that installs I should lock the bootloader and then unlock it again myself with my mi own account? I just want to make sure that this is the correct way to do it.
Also after it I unlock it should I flash the newest xiaomi.eu rom with android 10 or do i have to do something else first? Thank you
Hello,
I have a Redmi Note 8 pro (China version). I unlocked the bootloader and flashed the Global ROM. Unfortunately, the phone didn't reboot and it is now stuck with message "this ROM can't be installed on this device".
I realized afterwards that many other users had the same problem. Now it is impossible to flash the chinese Rom again (I get the CRCLIST flash error).
I believe my only option now is to re-flash the China stock ROM using the EDL method and an authorized Xiaomi Account. Can anyone help me do that?
If anybody has other suggestions, that would be really helpul.
You may flashed lower version of miui. If you can enter into fastboot mode, flash with latest China miui, then install TWRP, then use TWRP to flash global rom. I used twrp here and it works for my china phone, now im on global rom.
Just my 2 cents:
1. Always flash stock ROM via fastboot. ALWAYS use option "clean all". NEVER use option "clean all and lock"
2. Make sure the ROM's folder path is not containing space characters. Several stupid errors can come from this.
Ex: C:/this_is_the_rom_path
3. Use USB2.0 port from your PC. Better plug the device into USB2.0 rear port.
I couldn't make any of my USB front ports to work. Only the USB2.0 rear port.
MarkLev said:
Just my 2 cents:
1. Always flash stock ROM via fastboot. ALWAYS use option "clean all". NEVER use option "clean all and lock"
Click to expand...
Click to collapse
Unfortunately I believe that's precisely the mistake I made... Now the bootloader is locked again and I cannot unlock another time because I have no access to the phone. Mi Unlock Tool says "please add your account in developer options > Mi Unlock Status".
What happens next then?
petenoni said:
What happens next then?
Click to expand...
Click to collapse
Nothing, I cannot unlock the bootloader, cannot flash anything, and cannot boot the phone. I'm stuck here :/
idog8818 said:
You may flashed lower version of miui. If you can enter into fastboot mode, flash with latest China miui, then install TWRP, then use TWRP to flash global rom. I used twrp here and it works for my china phone, now im on global rom.
Click to expand...
Click to collapse
Thanks for the advice. Unfortunately, I believe the bootloader is locked again now. I can put the phone in fastboot mode, but I cannot flash anything (not allowed in locked state).
If anyone knows how to flash with EDL method... But of course we would need an authorized account to do that.
laxsmi said:
Thanks for the advice. Unfortunately, I believe the bootloader is locked again now. I can put the phone in fastboot mode, but I cannot flash anything (not allowed in locked state).
If anyone knows how to flash with EDL method... But of course we would need an authorized account to do that.
Click to expand...
Click to collapse
You have to wait untill "lock timer" expires , unlock BL again and flash stock ...
zOOk1981 said:
You have to wait untill "lock timer" expires , unlock BL again and flash stock ...
Click to expand...
Click to collapse
That's not possible, the phone has no Mi account attached to it... And how can I add an account to the phone when it doesn't boot?
laxsmi said:
Now the bootloader is locked again and I cannot unlock another time because I have no access to the phone. Mi Unlock Tool says "please add your account in developer options > Mi Unlock Status".
Click to expand...
Click to collapse
laxsmi said:
That's not possible, the phone has no Mi account attached to it... And how can I add an account to the phone when it doesn't boot?
Click to expand...
Click to collapse
I remember mi unlock tool will work in fastboot mode. I recommend you to use mi unlock tool which you used first time to try in fastboot mode. It may say: you need to wait xxx hours, then you have to wait. Or it may unlock directly like first time. Since you unlocked first time, it will be bounded into your Mi account already.
If you have fastboot mode available, do NOT too worried, more likely to you have it back. using SP Flash tool with paid auth account is last step.
Could you fix it?
When i playing pubg my redmi 5pro turn off itself and then it stuck in mi logo how i fix this bootloader is not unlooked please help
if u can get to recovery.. try factory resetting the device... and are u being able to get to fastboot?
Hridul P.K said:
if u can get to recovery.. try factory resetting the device... and are u being able to get to fastboot?
Click to expand...
Click to collapse
I can't get into recovery mode but fastboot is working
Gt450 said:
I can't get into recovery mode but fastboot is working
Click to expand...
Click to collapse
Well try flashing the stock rom watching some tutorial online... I am not sure if it can be done with locked bootloader...but I am assuming it can be done...so try doing that
Gt450 said:
I can't get into recovery mode but fastboot is working
Click to expand...
Click to collapse
you can flash the same stock ROM version with mi flash tool using fastboot method.
gursewak.10 said:
you can flash the same stock ROM version with mi flash tool using fastboot method.
Click to expand...
Click to collapse
you need your bootloader unlocked , else you cant
binarygod1299 said:
you need your bootloader unlocked , else you cant
Click to expand...
Click to collapse
i have the same issue of not able to get into recovery but able to go into fastboot while trying to boot normally just gets stuck at logo phone is able to charge. Showed to a local repair shop who says its a power ic issue searched web where someone mentioned about issue w flash memory (this was for some samsung phone not sure if it applies to mi). I have no clue does anyone know how i can eliminate some of my doubs step by step?
1. I think it may be my power/volume button strip but i dont know how can i test thee device without the strip (i have some schematics) .
2. Maybe Rom issue and since bootloader is locked and no usb debugging enabled nor i can unlock it using official tool since it requires me to go to developer settings and link my mi account i cant flash anything (though i came across some posts claiming you can bypass edl authorization using 2017-18 flash tools and anti5 test i dont have a clue as to what to do).
3. due to recent conflicts i cannot access mi india forums and nor can download proper official stock rom( since its my relatives phone i dont know what version it was on )
4. the phone was dropped previously which cracked the glass but was in working condition for more than 3-4 months atleast .Cant find any trace of water damage inside.
5. got some schematics from web by searching here and there but i dont know how to troubleshoot lol.
Any help would be appreciated , i cannot trust local technicians as there have been past incidences of missing parts from device after they keep for a day and return next day(skeptical if there are some parts missing or replaced w defective ones ).
Will update if i get it working.