Locked bootloader, stuck in recovery mode. - Xiaomi Mi Max 3 Questions & Answers

Hello guys.
I recently bought this phone and wanted to use netflix, but didn't allow me because it outdated and said it was not compatible with my phone. So I did a bit of research and found a post in "mi community" that said it was because phone had bootloader unlocked. The phone was new and I didn't change anything of it, but I found the bootloader was unlocked.
Installed fastboot and adb drivers, locked bootloader and got myself into a... Brick?
-I can still load into fastboot.
-If I turn on the phone, It tries to load android but loads Mi-Recovery 3.0 instead. Recovery also says "This MIUI version can't be installed on this device"
I'm so lost from this point, I need to know if there is a way to flash any rom, and which one do I need.
Thanks in advice

stuck on recovery
Most likely a chinese phone that came with global rom. If it came with global rom try flashing chinese rom and then unlocking bootloader and reflash global. Do not lock bootloader after flashing global.

toxiccat said:
Most likely a chinese phone that came with global rom. If it came with global rom try flashing chinese rom and then unlocking bootloader and reflash global. Do not lock bootloader after flashing global.
Click to expand...
Click to collapse
Thanks for your answer, that is exactly what I've.
The problem is I tried to flash a Chinese from but it always denie it. Tried to flash the last global rom and allows me to do it with the same program.
Not sure where I can get the official chinese rom or how to bypass the xiaomi protection.
Thanks for helping! Hope I can somehow do it

Locked bootloader
Try searching for tools below which might help.
Saki / XiaomiADBFastbootTools
XiaomiADBFastbootTools-6.5.1-Win
I had hard bricked mine and had to take back off and use EDL to revive.

toxiccat said:
Try searching for tools below which might help.
Saki / XiaomiADBFastbootTools
XiaomiADBFastbootTools-6.5.1-Win
I had hard bricked mine and had to take back off and use EDL to revive.
Click to expand...
Click to collapse
I don't find the way to reboot (via software) to EDL from fastboot, is still possible to access it by opening the phone?

Locked bootloader
23javi23 said:
I don't find the way to reboot (via software) to EDL from fastboot, is still possible to access it by opening the phone?
Click to expand...
Click to collapse
If you can flash global ROM. I think you just need to unlock bootloader and then flash China ROM once you have unlocked bootloader.
China ROM link below
https://xiaomifirmware.com/roms/latest-official-miui-roms-for-xiaomi-mi-max-3/

toxiccat said:
If you can flash global ROM. I think you just need to unlock bootloader and then flash China ROM once you have unlocked bootloader.
China ROM link below
https://xiaomifirmware.com/roms/latest-official-miui-roms-for-xiaomi-mi-max-3/
Click to expand...
Click to collapse
It lets me flash de global one, but when I try to do the same with chinese rom, it says the version is lower, so I can't "downgrade".
It's weird because according to version number, the global one was a few versions lower

Solved the issue
The same issue , i was also encountered , After Flashing with "Xiaomi_Mi_Max_3_V10.2.1.0.PEDMIXM_20190226.0000.00_Global_9.0" Mi Max 3 with the MiFlash20191206 tool , by default the tool used "Clear data and Lock".
The tool saying "Flashing" and my phone got rebooted and went to MI Recovery 3.0 and also i got the message as
"This MIUI version can't be installed on this device".
I am not clueless how to proceed. So downloaded the Chinese version and again i tried to flash with above tool. Now tool said that "Can't Erase Locked" phone.
So Now i connected to Miflash_unlock with fastboot and connected to mi account and again i unlocked the phone.
Now my phone automatically booted to the Global version.
So i hope the issue is selecting the option as "Clear data and lock" . We need to select only "Clear data" in the flash tool.

23javi23 said:
Hello guys.
I recently bought this phone and wanted to use netflix, but didn't allow me because it outdated and said it was not compatible with my phone. So I did a bit of research and found a post in "mi community" that said it was because phone had bootloader unlocked. The phone was new and I didn't change anything of it, but I found the bootloader was unlocked.
Installed fastboot and adb drivers, locked bootloader and got myself into a... Brick?
-I can still load into fastboot.
-If I turn on the phone, It tries to load android but loads Mi-Recovery 3.0 instead. Recovery also says "This MIUI version can't be installed on this device"
I'm so lost from this point, I need to know if there is a way to flash any rom, and which one do I need.
Thanks in advice
Click to expand...
Click to collapse
Hi there,
I encountered the same issue. I tried to flash some CN Rom without enough research, without knowing that you can't just flash an Android 10 rom from 9 directly by recovery (even TWRP). So I ended up Fastboot or TWRP but never able to boot into system. Fortunately I didn't flash my Max3 by fastboot rushly, so my phone was still unlocked.
This is how I solved it:
1. Download an official CN ROM (the below I used is MIUI 11 with Android 9.9.x);
I can't post link here but search "miui通过线刷升级" - you shall see a miui.com link ending with shuaji-393.html. That's the page I download the Mi Max3 ROM from.
2. Use MiFlash to flash the official ROM with the flash option "clean all", NOT "clean All and lock";
3. The phone shall reboot into system, give it 5-10 minutes;
4. Flash the miui.eu ROM you like (DO make sure it is Android 9 tho) by recovery (tutorial given under every official xiaomi.eu ROM download).
Again it's easy to search
It took me less than an hour to do it (I don't have much experience with new XiaoMi phone). So don't worry about bricking your phone forever.
Hope it helps to destress

Hi guys. I need some help too because I'm not totally sure what I have to do here so if anyone can give me some tips I would appreciate it.
I just ordered the 128gb 6gb ram version of Mi Max 3 and it might come with the global rom and already unlocked. Should I use the Mi flash tool to install the file MIUI 11 V11.0.3.0.PEDCNXM android 9 fastboot file? then after that installs I should lock the bootloader and then unlock it again myself with my mi own account? I just want to make sure that this is the correct way to do it.
Also after it I unlock it should I flash the newest xiaomi.eu rom with android 10 or do i have to do something else first? Thank you

Related

Mi 5s firmware installed on Mi 5s PLUS hardware

Dear Developers,
I have quite outstanding problem, I think the only at the forum. I have purchased "Xiaomi Mi 5s Plus" 6/128Gb phone, but I have received "Mi 5s Plus" hardware with "Mi 5s" firmware installed (and fake chineese version in addition (Global Stable 8.0.10.0.0 MAGCNDH). Model number is shown like "Mi 5s", memory volume and CPU speed is as expected, but the battery shows 3100mAh instead of 3800mAh, and the most disappointing thing is that the camera is not working at all (when starting says "Camera Error: can't connect to camera. Try restarting your device" (of course, it doesn't help...). The Seller does not respond (purchased in China via AliExpress).
I think all the above mentioned issues are coming because the firmware does not correspond to the hardware.
So, finally after reading the local forums I have understood that I have to reinstall the firmware to official Global Stable version (8.0.1.0) or to chineese stable (???). There are 2 ways: unlocking the bootloader (it is locked unfortunately) and install via fastboot with MiFlash utility or with locked bootloader using the EDL mode using the same MiFlash. But there are a lot of cases on local forum (but nearly 2 month ago) that after reflash in EDL mode the device become a brick (boot-loop).
So, my questions are the following. What are your sugestions in which way to proceed faster and more safe? Which firmware is more safe to try first in my case: global or chineese? Because on local forum it is written that to use EDL mode I need official english-chineese version to be preinstalled. What do you think about it? For me is not fully clear what will happen in EDL mode? Will bootloader also be overwritten or not? If everything is overwritten then why there are so many bricks/bootloops happened after using this mode with fake chineese firmware?
I have already requested permission to unlock bootloader, but there is no respond from xiaomi since 3 days already... hopefully because of New Year holidays (but in China?... strange...).
Also I have prepared an engineering cable to have possibility to enter EDL mode in case of bricking/bootloop. But I need your suggestion how to get rid of possible problems in my special case.
Many thanks in advance!
Heya,
The easiest way would be to download the global ROM from http://en.miui.com/download-315.html and flash it in the phone settings (about phone, firmrware upgrade, menu, choose ROM). I had the exact same "fake" ROM and had no problems flashing the official one.
Cheers!
*Edit* also, if you use the the MIUI-suite program and download the "fastboot image", bootloader, recovery, system and sdcard will be wiped (just tried)... flashing from the phone settings chould wipe aswell but never checked.
faldo said:
Heya,
The easiest way would be to download the global ROM and flash it in the phone settings (about phone, firmrware upgrade, menu, choose ROM). I had the exact same "fake" ROM and had no problems flashing the official one.
Cheers!
*Edit* also, if you use the the MIUI-suite program and download the "fastboot image", bootloader, recovery, system and sdcard will be wiped (just tried)... flashing from the phone settings chould wipe aswell but never checked.
Click to expand...
Click to collapse
I have already tried to flash via about the phone with downloaded ROMs (recovery image), it says "cannot verify the package" and does not proceed... Looks like because bootloader is locked.
Mi PC Suite program cannot connect to phone at all. Tried different version, also chineese one.
And I tried different ROMs (stable global, stable chineese) - no result...
You are able to flash an official ROM with locked bootloader so it seems your phone actually thinks it's a Mi 5s, wich complicates things. Could you try downloading a Mi 5s official ROM and see if it still complains about verification?
The chineese version of Mi PC suit should work with Mi 5s plus but you have to put phone in fastbootmode for it to connect, volume down + power when whone is off.
If your phone has the wrong bootloader you might have to wait for BL unlock to force flash your the Mi 5s plus ROM.... or just flash twrp and flash whatever ROM you want
faldo said:
You are able to flash an official ROM with locked bootloader so it seems your phone actually thinks it's a Mi 5s, wich complicates things. Could you try downloading a Mi 5s official ROM and see if it still complains about verification?
The chineese version of Mi PC suit should work with Mi 5s plus but you have to put phone in fastbootmode for it to connect, volume down + power when whone is off.
If your phone has the wrong bootloader you might have to wait for BL unlock to force flash your the Mi 5s plus ROM.... or just flash twrp and flash whatever ROM you want
Click to expand...
Click to collapse
Good idea about "Mi 5s" global stable, thanks, will be interesting to try (a little bit later).
And I didn't know that Mi PC Suite should be connected in fastboot - another thank you!
By the moment I've got the unlocking approval, so I'm going to proceed in a way with unlocking of bootloader as more safe way by my opinion.
Many thanks for your help!

[Question] Partial bricked - Doesn't recognize SIM card, and IMEI

Hi,
I bought Xiaomi Mi 5s with Global Stable ROM 8.2.1.0, and today I entered the official MIUI website to see what's the latest version that is released, in here:
http://en.miui.com/download-314.html
For some reason at the same moment I thought that 8.0.3.0 is higher version than mine (I missed a zero), and I downloaded the ROM installation file to the phone, and installed it through the updater app.
After the install, the phone loaded and didn't recognize the SIM card anymore, also couldn't enter the Network settings, the phone app or the phone status, and from what I read on the internet it probably don't recognize my IMEI anymore...
It also doesn't let me install my previous version (8.2.1.0) because the updater says it's not verified.
I tried to flash again the same ROM that is installed now (8.0.3.0), but it didn't help.
Also tried to do factory reset but I can't because it doesn't recognize the device id...
Is there something I can do immediately to fix this without applying a request to Xiaomi to unlock the bootloader (which I really don't want to do), and also to be stuck without a phone again for a couple of days?
Updater says it's not verified when you install 8.2.1.0? Maybe you got a wrong phone version?
zew384 said:
Updater says it's not verified when you install 8.2.1.0? Maybe you got a wrong phone version?
Click to expand...
Click to collapse
Nope, it's the right one: http://en.miui.com/thread-567657-1-1.html
From what I read over the internet they canceled this update because it has issues, battery drain mostly, but nothing official that I saw.
I'm not sure,but according to a tutorial I found, which is about down grade from miui 8 to 7. You need to have a factory reset to have imei back
By the way, Mi 5s always comes with Chinese ROM, so maybe you have recovery installed already, where u can flash without verify.
forgivemypoorEN said:
I'm not sure,but according to a tutorial I found, which is about down grade from miui 8 to 7. You need to have a factory reset to have imei back
By the way, Mi 5s always comes with Chinese ROM, so maybe you have recovery installed already, where u can flash without verify.
Click to expand...
Click to collapse
No I don't have recovery, probably when it arrives to the stores here they flash official ROM and remove custom recovery (just guessing).
I see I can't avoid unlocking the device, although I don't want to. In my case I down graded from 8.2.1.0 to 8.0.3.0, but I hope that a factory reset will also help after I'll unlock the device.
forgivemypoorEN said:
I'm not sure,but according to a tutorial I found, which is about down grade from miui 8 to 7. You need to have a factory reset to have imei back
By the way, Mi 5s always comes with Chinese ROM, so maybe you have recovery installed already, where u can flash without verify.
Click to expand...
Click to collapse
Wow, bull****, mine came with Global rom, and in xiaomi phones after ~2016 there is like ~1% chance that they will came with recovery and unlocked bootloader
to op:
unlock bootloader (developer settings + miunlock tool) and then use miflash to reflash rom
ariel.levin said:
No I don't have recovery, probably when it arrives to the stores here they flash official ROM and remove custom recovery (just guessing).
I see I can't avoid unlocking the device, although I don't want to. In my case I down graded from 8.2.1.0 to 8.0.3.0, but I hope that a factory reset will also help after I'll unlock the device.
Click to expand...
Click to collapse
I had exactly the same problem as you last month. All i can do is flashing my phone using deep flash cable. Factory reset does solve this problem, but in my case i cant. When hit reset on settings, i must input mi account password and it did nothing after that. I also cant unlock my phone because i forgot binding my device to mi account in developer settings when still in miui 8.2.1.0.
mezutelni said:
Wow, bull****, mine came with Global rom, and in xiaomi phones after ~2016 there is like ~1% chance that they will came with recovery and unlocked bootloader
to op:
unlock bootloader (developer settings + miunlock tool) and then use miflash to reflash rom
Click to expand...
Click to collapse
Sorry, I didn't know they are selling Mi 5s global versions. I thought Mi 5s was only sold in China. I did google it online and it was not sold elsewhere and there was no global rom then.
Update for people who will encounter this issue and will read this:
What solved it in my case, was to send Xiaomi a request to unlock the device, they returned an answer pretty fast (2 hours later), maybe because I wrote them what happened in the request. I unlocked the device using Mi Unlock tool, downloaded a fastboot version of the global ROM I wanted (8.0.3.0) from the official MIUI website, and flashed it using Mi Flash tool, choosing the option "clean all, flash and unlock". After the flashing succeeded, the IMEI was restored and everything is ok, and also the bootloader is locked again like nothing happened.
pretty much what "mezutelni" said to do

Stuck at Recovery 'This MIUI version can't be installed on this device' - My Options?

Hi All,
I did a silly thing, basically, bought a new phone which was supposed to be a Global model - we'll get to that in a minute...
Right from setting it up, I just felt that it wasn't right given that the Bootloader was already unlocked, so I decided to download the latest global fastboot rom and flash it via MiFlash (I've done this before plenty of times on RN3s and my Mi6...)
As this phone is for my mother in law, I thought it would be best to lock the bootloader back up, making it as 'stock as possible'.
Obviously, this is where things went wrong... Since reading around the web, I see now that it must actually be the chinese version of the phone and had the global rom flashed to it, but then you need to keep the bootloader unlocked?
Basically, I've tried all sorts, can't get anything other than ADB Sideload from recovery (Connect with MiAssistant) and fastboot obviously won't let me flash another rom now...
So my questions are :-
- Is EDL mode my only option? If so, is it a viable option considering all this stuff I'm reading about Anti-rollback and the fact that the current global rom that's flashed to the device is actually the very latest global stable so what Chinese rom do I go to from here?
- Is the absolute only way to get into EDL mode by disassembling the device and shorting the pins? (Redmi Note 3 used to have this power button/volume buttons sequence from power off state to get into EDL?)
- What's this EDL Auth stuff all about I'm seeing around the web and do I need to worry about it?
- Is there actually any fundamental differences in hardware with this being the Chinese model? Where I bought it from it was advertised as supporting Band 20 LTE for example, is this still the case?
In summary, am I right in thinking if I can actually get the China stable/dev rom flashed to it via EDL, I can then seek authority to unlock the bootloader, then flash the global rom again and leave the bootloader unlocked? Is this the right procedure?
** Also, just for info, this device hasn't been signed into yet with a Google account or a Mi Account so there's no Mi Account bound to it unfortunately
Thanks in advance!!!
From what i can understand about your situation,
You bought a phone which is chinese version but already on a global rom which is bootloader unlocked, and you just want to lock the bootloader.
My solution: Download the "RIGHT" fastboot global Rom version(OEIMIFA or NEIMIEK rom) for your phone via miflash and check "Clean all and Lock" to lock the bootloader.

Can anyone help me? Mi Max 3 can't be booted nor flashed anymore..

Hi I have a big problem with my Max 3.
I ulocked it and then I flashed it with the official Xiaomi Flash App and clicked the 'clean all and lock' button. Unfortunally I flashed a bad ROM.
Now I can only boot to recovery (This MIUI version can't be installed on this device) and Fastboot.
If I try to flash a ROM I see 'Erase not allowed in lock state'. I tried to unlock it with fastboot, I receive 'Token verify failed' I tried with Mi Unlock: My account is accepted and when I click Unlock
I have 'Current account is not bound to this device' But I can't bound it because i can't boot it!!
I would be very, very happy about a solution for this mess!!!
Thanks everyone who has i idea!
Use MiFlash tool, flash the fastboot version of latest global stable or beta rom on: https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
dinhvtai said:
Use MiFlash tool, flash the fastboot version of latest global stable or beta rom on: https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Click to expand...
Click to collapse
He already tried that. You can't use MiFlash with locked bootloader.
I am afraid you have bricked your phone. Unless you have an official Xiaomi servicecentre nearby.
mierlo420 said:
He already tried that. You can't use MiFlash with locked bootloader.
Click to expand...
Click to collapse
Are you sure?
I had exactly the same. Locked my device when flashing (!!!?) then error while flashing, format the phone and everything was gone, locked bootloader.
After a search of 2 months I found out it was possible to repair the phone.
You have to open your phone, not very hard..follow this video https://youtu.be/dYlKG3EcpHg
Then contact the guys from S-Unlock https://s-unlock.com. I did it too, and they are thrustworthy.
You have to test point your device, https://youtu.be/IYWItgq2f9E until the Quallcom driver appears in your devicelist.
Then contact S-Unlock via chat. It can take up to 2 hours before the respond. The service cost 25 dollar for installing new Rom.
They log in to your computer via Teamviewer, they install MiFlash and Rom.
They have a special restore account. Without this account your Max will never work again, no need to try.
For 25 dollar my Max3 is working again.

Bootloop and unable to reflash stock ROM

Hello,
I have a Redmi Note 8 pro (China version). I unlocked the bootloader and flashed the Global ROM. Unfortunately, the phone didn't reboot and it is now stuck with message "this ROM can't be installed on this device".
I realized afterwards that many other users had the same problem. Now it is impossible to flash the chinese Rom again (I get the CRCLIST flash error).
I believe my only option now is to re-flash the China stock ROM using the EDL method and an authorized Xiaomi Account. Can anyone help me do that?
If anybody has other suggestions, that would be really helpul.
You may flashed lower version of miui. If you can enter into fastboot mode, flash with latest China miui, then install TWRP, then use TWRP to flash global rom. I used twrp here and it works for my china phone, now im on global rom.
Just my 2 cents:
1. Always flash stock ROM via fastboot. ALWAYS use option "clean all". NEVER use option "clean all and lock"
2. Make sure the ROM's folder path is not containing space characters. Several stupid errors can come from this.
Ex: C:/this_is_the_rom_path
3. Use USB2.0 port from your PC. Better plug the device into USB2.0 rear port.
I couldn't make any of my USB front ports to work. Only the USB2.0 rear port.
MarkLev said:
Just my 2 cents:
1. Always flash stock ROM via fastboot. ALWAYS use option "clean all". NEVER use option "clean all and lock"
Click to expand...
Click to collapse
Unfortunately I believe that's precisely the mistake I made... Now the bootloader is locked again and I cannot unlock another time because I have no access to the phone. Mi Unlock Tool says "please add your account in developer options > Mi Unlock Status".
What happens next then?
petenoni said:
What happens next then?
Click to expand...
Click to collapse
Nothing, I cannot unlock the bootloader, cannot flash anything, and cannot boot the phone. I'm stuck here :/
idog8818 said:
You may flashed lower version of miui. If you can enter into fastboot mode, flash with latest China miui, then install TWRP, then use TWRP to flash global rom. I used twrp here and it works for my china phone, now im on global rom.
Click to expand...
Click to collapse
Thanks for the advice. Unfortunately, I believe the bootloader is locked again now. I can put the phone in fastboot mode, but I cannot flash anything (not allowed in locked state).
If anyone knows how to flash with EDL method... But of course we would need an authorized account to do that.
laxsmi said:
Thanks for the advice. Unfortunately, I believe the bootloader is locked again now. I can put the phone in fastboot mode, but I cannot flash anything (not allowed in locked state).
If anyone knows how to flash with EDL method... But of course we would need an authorized account to do that.
Click to expand...
Click to collapse
You have to wait untill "lock timer" expires , unlock BL again and flash stock ...
zOOk1981 said:
You have to wait untill "lock timer" expires , unlock BL again and flash stock ...
Click to expand...
Click to collapse
That's not possible, the phone has no Mi account attached to it... And how can I add an account to the phone when it doesn't boot?
laxsmi said:
Now the bootloader is locked again and I cannot unlock another time because I have no access to the phone. Mi Unlock Tool says "please add your account in developer options > Mi Unlock Status".
Click to expand...
Click to collapse
laxsmi said:
That's not possible, the phone has no Mi account attached to it... And how can I add an account to the phone when it doesn't boot?
Click to expand...
Click to collapse
I remember mi unlock tool will work in fastboot mode. I recommend you to use mi unlock tool which you used first time to try in fastboot mode. It may say: you need to wait xxx hours, then you have to wait. Or it may unlock directly like first time. Since you unlocked first time, it will be bounded into your Mi account already.
If you have fastboot mode available, do NOT too worried, more likely to you have it back. using SP Flash tool with paid auth account is last step.
Could you fix it?

Categories

Resources