I have a Nova3 PAR-LX9, it is supposed to have a Dual SIM capablity, but it is disabled by TELCEL (and I hate it) Only one SIM is allowed and the other only works for a MicroSD..
How can I Activate and use both SIM slots? thanks for your Wise Help and advice!!
Related
Ok - some mobiles had option I believe(unconfirmed) that with 2 sim cards installed, a piece of software on the phone allowed switching between sim cards - saves turning them on/off - any idea if the xda has this option?
Reason being - I have a personal sim card, and now I have a work one BUT would prfer just one phne and do prefer the xda
Scott
yep
I use "wivit" sim switcher, works just fine on my xda2s, xda2 and xda2i
http://www.wivit.com/products/SSS.shtml
wivit
Wivit doesnt works on WM05
I know this is a longshot - but anyone know with this type of software if the software will tell you that a call is coming in on say on 1 sim card, so that you can then switch to that sim card???
Cheers
Scott
Very long shot - It doesn't work. Only one SIM at a time is connected. What I do is set up a divert from one to the other, so that I can always received all my calls whichever SIM is active & then simply switch to the appropriate SIM when making calls
Hi
is possible have work at same time two SIM's for exemple TMN and Vodafone if I buy a new card and copy this two data for one SIM card?
or I need change when restart the phone?
regards
filjoa said:
Hi
is possible have work at same time two SIM's for exemple TMN and Vodafone if I buy a new card and copy this two data for one SIM card?
or I need change when restart the phone?
regards
Click to expand...
Click to collapse
tricky question in theory yes you can do it, I had 2 sim cards cloned on one special SIM (up to 6 numbers) working on p3600 during a long time, but these were from TMN (SIM compV1). Vodafone in portugal is using since 2002 SIM compV2 and these cannot be cloned (clonning uses a brutal force atack to get internal codes from original SIM) and the compV2 has a "defense" mechanism that may crack the SIM during the scanning.
if you can achieve this, the SIM change is done by Software only, so there is only the need to restart phone module of the PDA (5 seconds to do it).
Another alternative is to use a system of DUAL SIM also, but this requires that you cut the SIM chip of each card and uses a special card to insert the 2 chips (for the p3600 I saw it working with a maximum of 2 chips)
e é tudo and that's all folks
The dual-sim version of S4 mini takes 2 SIM cards. I get that. But how does this work?
Do I need to turn off/turn on the phone to switch from one sim to another, or does it provide full (or limited) functionality of both SIMs and the same time?
they work on dual sim standby I think that's the correct name,
you can use only one sim for data plan (3g) you get to choose which one to use
wen you are on a call the other sim is turned off or you can configure call redirection to the active sim but your telephone company have to be compatible
Sent from my GT-I9192 using Tapatalk 4
Hello
I hope this is the right place to ask and I feel at this point I have been searching Google dry over the past week.
I have a HTC one m8 with dual SIM, as I live in Sweden and work in Denmark, I have a Swedish tre.se in SIM1 and then a Danish 3.dk in SIM2
While I'm in Denmark, both SIM card works and connects to their network, but the second I enter Sweden, SIM2 won't find a connection.
I tried to switch the two cards, but then it's just the Swedish card in SIM2 that won't connect.
From what I have been able to Google , SIM2 should only be using 2g network, but this should be a problem for either of the subscriptions as far as I know.
Is there some special trick, setting or some I need to do to make it connect to 2g
It is original OS on it. I unfortunately can't root it, as my company mail will detect it and block my access. (Worx home by Citrix + touchdown)
What I have tested so far:
Factory reset of the phone.
New SIM card for both cards.
Activate and deactivate flight mode.
Deactivate and activate each SIM from the dual SIM manager.
Switch cards in slots (1->2 and 2->1).
Disable SIM1 ( SIM 2 still didn't connect)
I have also contacted each phone company, but they were to no use and just said it should work hehe
Any suggestions or ideas ? I'm open to all suggestions that doesn't involve getting another phone
Also this is not one of the cheap Chinese dual SIM versions.
Thanks
I may have managed to get a little closer to the cause.
It seems that SIM2 is actually only running over GSM / 2G for god knows what reason, and that is not supported by my phone company i Sweden, which is why it only works in Denmark.
I will try with another phone company called TDC and see if they have the same issues over there or else its bye bye useless dual sim
Hello,
I figuerd out a curiousity with WP10 and Dual Sim phones. I have a Lumia 640 and 2 Lumia 950 here. One L950 has a SIM Card from Vodafone and run perfect in SIM Slot 1. Data work fine when Wlan is of from 2G to LTE as it should be. In the L640 and the other L950 I use SIM Cards from Provider Telekom / Congstar (which is also Telekom and use same network). Both phones are not able to provide any Data connection when the SIM card is in Slot one while both connect imeditaly once I move the SIM card in Slot 2
I won't care at all to use Slot 2 instead of Slot one but all contacts are without SIM card then and you have to switch all manualy to SIM 2 which is anoying. I verify that I use the exact same settings on Slot 1 and Slot 2 and I also switch back the card but again no Data in Slot. I already find some user with simmilar Problem but nobody had a better solution then to switch to Slot 2. Does anyone here run into simmilar trouble and / or have an idea how to fix that bug?
which sim did you choose for the data connection? 1 or 2
I select 1 once I had the sim in slot1 and 2 when the sim was in slot2. However, with the latest update on fastring it is fixed on the lumia 640 and it has now data in slot 1 as it should be. Unfortunatly the 950 dont take the update. I read that a factory reset can fix it !?
I was traveling recently to Poland and had that exact issue. Polish SIM in SIM1 slot, my homeland SIM in SIM2 and I had issues with getting a data connection. Swapped the PL SIM to SIM2 and it worked.
Issue now resolved with the latest update. Why don't you just enrol your 950 into the slow ring and get the updates?
GOgzs said:
I was traveling recently to Poland and had that exact issue. Polish SIM in SIM1 slot, my homeland SIM in SIM2 and I had issues with getting a data connection. Swapped the PL SIM to SIM2 and it worked.
Issue now resolved with the latest update. Why don't you just enrol your 950 into the slow ring and get the updates?
Click to expand...
Click to collapse
I already have my 9650 on the fast ring but no update appears. WIll try the slow ring now, maybe it apperars then. Some Boards already reprot that MS has trouble to provide the update to 950 / 950XL