Related
I have a Joying car radio RK3188 1024x600 and it works fine till I got laast week on my Oneplus One smartphone Marshmallow update (Cyanogen OS 13).
Now I can't connect my device anymore via bluetooth.
I can see that the two devices are paired but the letters on the radio screen are still white an phonebook is not available. On my smartphone I see under bluetooth settings that there is a connection but without phone funktion.
I contact manufacturer and he offered to go into recovery and wipe all data/ factory and cache reset and then install firmware. I did this exactly two times with firmware JY_rk3188_h(20160222) RK3188 1024*600 from february and the latest firmware JY_rk3188_h(20160328) RK3188 1024*600. But I still can't connect phone with bluetooth, has someone an idea and maybe the same problems?
MueKo said:
it works fine till I got laast week on my Oneplus One smartphone Marshmallow update (Cyanogen OS 13).
Now I can't connect my device anymore via bluetooth.
Click to expand...
Click to collapse
Well known problem with CM13 and HU bluetooth...
Apparently no other solution than going back to CM12, at least for Oneplus smartphones.
themissionimpossible said:
Well known problem with CM13 and HU bluetooth...
Apparently no other solution than going back to CM12, at least for Oneplus smartphones.
Click to expand...
Click to collapse
Thanks for your answer. Is it known where the problem comes from, CM13 or HU?
MueKo said:
Is it known where the problem comes from, CM13 or HU?
Click to expand...
Click to collapse
My speculation is that there might be some incompatibility between the 2 Bluetooth stacks profile implementation... as the problem is only with CM13, this incompatibility should be mostly ascribed to CM13.
Same issue here
Does anyone know if this will be resolved in an update to CM13?
I found a thread saying this:
open the /system/etc/init.qcom.bt.sh and edit the following line:
Setprop ro.bluetooth.hfp.ver 1.7
... To:
Setprop ro.bluetooth.hfp.ver 1.5
But my phone is not rooted
This is interesting, maybe someone has a rooted OnePlus One and can test this?
Tested and Working well
Tested and making no difference. Still no phone BT connection to my car hands-free head unit.
PAPPAFRITAS said:
Tested and Working well
Click to expand...
Click to collapse
Can you specify which OS do you have used.
Same issue here, now on CM13-20160415-NIGHTLY-bacon... I hope in the near future it will come fix... (MCU KGL5 2.55)...
ranmic said:
Does anyone know if this will be resolved in an update to CM13?
I found a thread saying this:
open the /system/etc/init.qcom.bt.sh and edit the following line:
Setprop ro.bluetooth.hfp.ver 1.7
... To:
Setprop ro.bluetooth.hfp.ver 1.5
But my phone is not rooted
Click to expand...
Click to collapse
Worked like a charm for me!
OnePlus One on Android 6.0.1 - first time Bluetooth is actually working with that unit.
Fixed in nightly 2904 and working perfectly since.
Sent from my Bacon via XDA free
Today I checked this solution. I rooted my OnePlus One with CM13.0 and edit init.qcom.bt.sh file like this:
ranmic said:
Does anyone know if this will be resolved in an update to CM13?
I found a thread saying this:
open the /system/etc/init.qcom.bt.sh and edit the following line:
Setprop ro.bluetooth.hfp.ver 1.7
... To:
Setprop ro.bluetooth.hfp.ver 1.5
Click to expand...
Click to collapse
And I can confirm that it works.
Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri
i need your help too sir
cm-12.1-20160713-Bet…weakV3.zip501.1 MB , so the system just 500 mb?
now im still using eui with malware , so i just follow the installation step?
Tested V3 installation sequence
I went to TWRP 3.0.2 for a factory reset wipe
Installed ROM "cm-12.1-20160713-BetaHydri-CollapseTweakV3.zip"
Installed OpenGApps arm64 5.1 Nano
Installed all three ZIPs from DolbyAtmos Fix
Wiped Caches via TWRP
Rebooted
I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)
Presidente_84 said:
Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri
Click to expand...
Click to collapse
everyone works mate just go ahead and install v4 cm
I'm on V3 and all seems ok, what's the differences between V3 & V4?
martinbanshee said:
I'm on V3 and all seems ok, what's the differences between V3 & V4?
Click to expand...
Click to collapse
"Only some build.prop changes as some folks reported problems. [...]
one of the main changes was this:
ro.telephony.default_network=22,22 and ro.ril.hsxpa=1
it was before
ro.telephony.default_network=10,10 and ro.ril.hsxpa=2"
So LTE and UMTS changes basically
Thanks, I'll try V4 for a few days and see how it goes.
Sent from Tapatalk
thank you all guys.
Now i am with the stock original ROM EUI without malware, without any problem.
Can anyone post some pictures or screenshots from CM 12.1 ROM v4?
to see the appearance of the system
Stiffrigg said:
I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)
Click to expand...
Click to collapse
How about MHL TV-OUT & IR blaster?
hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?
dragangiga said:
hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?
Click to expand...
Click to collapse
BetaHydri said:
Hi,
you don't need to uninstall FlashRing.
With the Flash RIng App you can configure which APP and when the Flash should be used for notification.
View attachment 3819790
View attachment 3819791
View attachment 3819792
View attachment 3819793
View attachment 3819794
Click to expand...
Click to collapse
Sent from my LeTv 1 Pro using Tapatalk
letv le 1 pro
willngg said:
Sent from my LeTv 1 Pro using Tapatalk
Click to expand...
Click to collapse
i fix it
thanks a lot
System freezes when data connection switches to Edge
Hi All,
Using this ROM from BetaHydri, overall it works really good, however I have a problem that is getting annoying: whenever the phone switches to Edge from LTE/HSPA, the system freezes. As this can happen even in a staircase in an office building or on a train ride on the countryside it is rather vexing.
I have deleted the caches, but the issue persists.
Has anyone encountered the same problem maybe? Any ideas how to solve this?
Evaluation and some solutions
After some evaluation I can say this rom is really good.
There were some issues however:
I had sensors malfunctioning (gyro inverted). There is some discussion on this subject in Betahydri's developer thread, but I cannot post there as I'm considered a newbie by xda
Somehow the sensor calibration file (/persist/sensors/sns.reg) can get messed up. The trick is to delete the file, and on the next boot the system should replace it with the defaults, which are in /system/etc/sensors/sensor_def_qcomdev.conf. But this is not (always?) happening on this CM rom. What I did to resolve was to delete /persist/sensors/sns.reg, make a full TWRP backup, factory wipe, flash cuoco's 11s rom, start it, confirm if the gyro is working again, then restore the TWRP backup. Maybe there's a simpler way, but this worked.
I had a non-working notification LED. Wiping data in TWRP solved this, but I just had to find out what it was It turns out wiping the data of Settings Storage (com.android.providers.settings) was enough to restore the notification LED. The culprit is that there is a value in the settings.db of this component, in the system table called notification_light_pulse which was set to 0 somehow. Setting it to 1 with SQLite Editor (speed software) also solved the problem. There are more interesting values in this table by the way.
IR is not working, this is a known issue and I have no solution.
Double tap to wake does not work, at first I thought this would be a showstopper for me, but then I found out that with the Gravity Screen app, I can wake and sleep by using proximity and G sensors, which more than satisfies my needs for easy wake up and sleep.
OTG is not working natively, this can be overcome by third party apps like USB OTG helper. Could have something to do with fuse kernel modules not being available.
Volume level of ringer/notification is not calibrated, first step is already very loud and it doesn't change much if set higher. Does somebody now a solution for this?
I have dual SIMs and I could not switch one SIM to anything else than GSM only. Trick is to disable the other SIM, then set the network mode you want, and then re-enable the other SIM. There can be only one SIM for data, but somehow it wouldn't switch if the other SIM (that currently has the data) is still active.
If I find more, I'll post here.
Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby
chr0m said:
Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby
Click to expand...
Click to collapse
You can try to see what is happening with OS Monitor (from play store) In settings, enable expert mode to see the native Linux processes, try to find the one that is eating the cpu. I had this once, it was some media indexer process that would not stop (can't remember the exact name).
xposed
Hi all,
Since i cannot post in ROM's thread, i will ask here for your help. I am having a hard time installing Xposed on BetaHydri-CollapseTweakV4.
I get an error while fashing Xposed Framework xposed-v86-sdk22-arm64:
<<Xposed version: 86
! Wrong platform: arm
! This file is for: arm64>>
So i successfully flashed the arm framework (for 32 bit), for afterwards to install XposedInstaller_3.0_alpha4. But now i am getting "Xposed Framework installed, but now active."
Any idea? Thanks.
Am I am on TRWP 3.0.2.0 by CUOCO92, coming from Le1PRO_US_X800-ROW-PB-v60-CUOCO92-5.5.014S.
Hi all
I've got the US version and I'm with 12.1 v4.
I got only edge on data sim (the other is one only for calls)
Any ideas as I can't select any options but GSM from the hidden menu in *#*#4636#*#*?
Is it OK if I flash 14s Cuoco now as I'm in 12.1?
---------- Post added at 02:42 PM ---------- Previous post was at 02:28 PM ----------
I just followed #slidetowipe and now I got LTE
T H A N K Y O U M A N ! ! !
It's interesting how the same phone works differently for different people... what I mean is that the GPS on my phone is very bad - it was bad from the very beginning with factory ROM, with MrRusch ROM, different versions, gps.conf tweaks, etc.... Now I am using an external bluetooth GPS receiver as the fix was painfully slow or non-existent. Some people report no such problems, how can that be, I wonder?
Now I use CM 12.1 V4 ROM from BetaHydri, But I found some bugs :
1. Error clock / alarm... If I choose setting or an alarm clock, appeared notification "unfortunately, clock has stopped"
2. IR isn't working
3. And I have a problem with the network 4G LTE, where the issue there is no on EUI ROM
Please help me to fix it.
To be honest I prefer premises EUI ROM if there is not malware and adware, Is there EUI ROM clean of Malware and adware?
If there are please help me to link from the ROM and the way instal rom, because I was new in using x800.
And I had experienced hard brick at instal couco92 14S.
Thanks
hello i'm mi 5s 4gb/128gb user
yesterday, i was using cyanogenmod 13 but i want to use miui again
so i restored nendroid backup from twrp recovery
that was start of diaster..
after this. fingerprint scanner mostly doesn't work
sometimes fingerprint scanner work correctly after reboot, it doesn't work.. and sometimes... it works...
i did many many method (global rom, china rom via edl mode, fastboot mode) but everything has same result,
so i looked at my logcat
it says
QFP : QfpThreadMatch::execute: match result -3: QFP_INSUFFICIENT_COVERAGE
with my finger or not logcat said same result
why my fingerprint scanner doesn't work?
is it hardware issue?
sorry for poor english
yesterday, i was using cyanogenmod 13.......is it hardware issue? .......
jlmcr87 said:
yesterday, i was using cyanogenmod 13.......is it hardware issue? .......
Click to expand...
Click to collapse
???
Maybe placebo effect but people are saying Global rom had improved fingertip detection rate.
If i were you, i would flash as stock as possible, recovery, bootloader, lock status, everything, just to determine software versus hardware failure.
Hope for the best, as this kind of life cycle premature failure freak me out, first stucked autofocus sensor now this!!!
jpg3927 said:
???
Click to expand...
Click to collapse
You change the software and then ask if it´s hardware?
jlmcr87 said:
You change the software and then ask if it´s hardware?
Click to expand...
Click to collapse
yes it's strange
jpg3927 said:
yes it's strange
Click to expand...
Click to collapse
I had a problem which seemed to be hardware related after flashing the Chinese developer ROM and then later restoring a Miui EU ROM from a backup. My problem was with audio - there was no sound coming from the speaker or headphone output. I did diagnostic tests which failed - indicating a hardware problem.
It was only after re flashing the EU Miui ROM that the problem was resolved.
EpicSauce said:
I had a problem which seemed to be hardware related after flashing the Chinese developer ROM and then later restoring a Miui EU ROM from a backup. My problem was with audio - there was no sound coming from the speaker or headphone output. I did diagnostic tests which failed - indicating a hardware problem.
It was only after re flashing the EU Miui ROM that the problem was resolved.
Click to expand...
Click to collapse
i solved it
i think this was problem of driver
so i needed rollback of driver
first. i flashed 6.10.13 eu rom over 6.12.29
it occurs bootloop
second. i flashed 6.12.29 over 6.10.13 again. and fingerprint works like charm again!
Exists the cyanogenmod for Mi5s?
Still very buggy. We have to wait for xiaomi to release the source code to get nice CM .
The fingerprint happened to me too, it just stopped working.
Flash the stable global using fastboot, it will erase everything, and will be great again.
Don't restore with Titanium backup, I had all kind of weird problems everytime I tried.
One of the worst fp sensors ever. I tried all the tricks mentioned in several places, detection rate stays very low.
Sent from my MI 5s using Tapatalk
LucaOwner said:
Exists the cyanogenmod for Mi5s?
Click to expand...
Click to collapse
Linage os
[SOLVED]
Tahnks to hsss1231
Solution:
I found a way to solve it.
1. root mi 5s
2. download 'buildprop' from play store
3. Probably the first 'audio.deep_buffer.media' in 'AUDIO' is 'True'
4. Change 'True' to 'False'
then the problem is solved.
Hey,
I have a problem with my Mi5S. Videos and audios does not play properly.
When I try to play a video or audio there is a strange buzzing sound, videos stutter and audios stuck between 0:00 and 0:01.
This is happening at almost all apps (Gallery, youtube, facebook, instagram...) only exceptions I notice are browsers and x-plore video player
I uploaded screen record of the problem. First I open youtube app there is problem. Second I open chrome there is no problem.
I first encounter this problem after I installed TWRP and LineageOS. I updated LOS one week later and problem was gone but it came back. I thought this was a bug of LOS. Ive tried installing dolby drivers. Ive wiped dalvic cache, cache and data. Reinstalled LOS. Ive installed Resurrection Remix. But non of them work.
Please help what can cause this problem and how can i solve this?
I found one person with similar problem in this link. https://forum.xda-developers.com/mi-mix/help/media-lags-phone-browser-t3633544
Edit I found another https://forum.xda-developers.com/mi-5s/help/failure-audio-video-lineage-os-t3660798/post74073410#post74073410
ubkorkut said:
Hey,
I have a problem with my Mi5S. Videos and audios does not play properly.
When I try to play a video or audio there is a strange buzzing sound, videos stutter and audios stuck between 0:00 and 0:01.
This is happening at almost all apps (Gallery, youtube, facebook, instagram...) only exceptions I notice are browsers and x-plore video player
I uploaded screen record of the problem. First I open youtube app there is problem. Second I open chrome there is no problem.
I first encounter this problem after I installed TWRP and LineageOS. I updated LOS one week later and problem was gone but it came back. I thought this was a bug of LOS. Ive tried installing dolby drivers. Ive wiped dalvic cache, cache and data. Reinstalled LOS. Ive installed Resurrection Remix. But non of them work.
Please help what can cause this problem and how can i solve this?
I found one person with similar problem in this link. https://forum.xda-developers.com/mi-mix/help/media-lags-phone-browser-t3633544
Edit I found another https://forum.xda-developers.com/mi-5s/help/failure-audio-video-lineage-os-t3660798/post74073410#post74073410
Click to expand...
Click to collapse
I found a way to solve it.
1. root mi 5s
2. download 'buildprop' from play store
3. Probably the first 'audio.deep_buffer.media' in 'AUDIO' is 'True'
4. Change 'True' to 'False'
then the problem is solved.
Maybe new firmware can solve the problem? Search error 7 fix and flash latest firmware in recovery. No wipe needed.
hsss1231 said:
I found a way to solve it.
1. root mi 5s
2. download 'buildprop' from play store
3. Probably the first 'audio.deep_buffer.media' in 'AUDIO' is 'True'
4. Change 'True' to 'False'
then the problem is solved.
Click to expand...
Click to collapse
THANK YOU VERY MUCH.
I cant describe how happy i am. Not being able to play media was very awful.
ubkorkut said:
thank you very much.
I cant describe how happy i am. Not being able to play media was very awful.
Click to expand...
Click to collapse
thankyou this worked for me too on mi mix 2 rr!!!! I love this community!!!!
got the same problem but the solution dont work on my mi5s,
i'm lost i don't know what to try, i've restore my phone by twrp, i've reinstall the miui 9 by fastboot, i've reinstall twrp and reunblock my phone by miunlock,
i've tried the most knowned roms like lineage os 15.1, RR 6.0 etc....
The problem is on all roms based on android 8.1...
One week ago all was nice i was on unnoficial build of LOS 15.1,
and when i tried to install the official build i've had the error 7 (i know how to solve the error but i didnt do i was to hurry) and so i installed the miui 9 rom eu by fastboot and miflash and when i reinstall twrp, root and LOS15.1, i got this ****ing problem of medias who dont work.
Ty for helping me i hope i've been cleared, have a good day.
maujogue said:
got the same problem but the solution dont work on my mi5s,
i'm lost i don't know what to try, i've restore my phone by twrp, i've reinstall the miui 9 by fastboot, i've reinstall twrp and reunblock my phone by miunlock,
i've tried the most knowned roms like lineage os 15.1, RR 6.0 etc....
The problem is on all roms based on android 8.1...
One week ago all was nice i was on unnoficial build of LOS 15.1,
and when i tried to install the official build i've had the error 7 (i know how to solve the error but i didnt do i was to hurry) and so i installed the miui 9 rom eu by fastboot and miflash and when i reinstall twrp, root and LOS15.1, i got this ****ing problem of medias who dont work.
Ty for helping me i hope i've been cleared, have a good day.
Click to expand...
Click to collapse
You probably have the wrong firmware. Try flasher older Firmware. That's all mine was
Try firmware 8.1.4, Luk told that that is oldest FW that is supported.
Or flash 8.3.15 latest one.
https://basketbuild.com/devs/yshalsager/Xiaomi-Firmware/Developer/8.3.15/Global/MI5SGlobal
predragiPredrag said:
Try firmware 8.1.4, Luk told that that is oldest FW that is supported.
Or flash 8.3.15 latest one.
I've not this problem on miui 9EU.... but i want to install a stock rom for all the good points it gives ! thank yuou for your answer but its not the solution at my problem...
this i don't understand is that i was last week on LOS 15.1 and it was working like a charm, but after i installed miui9 by fastboot(i lost everything by the way) when i reinstall my rom LOS it didnt worked..... i'm so tired of miui ty for your help...
another point, i tried LOS 14. official, dont works too...
I will try to flash the file you have given to me. Is that a rom or another file ? Have i to flash like a rom and wipe system data cache and dalvik by twrp or just like a file over my current rom ? ty again
---------- Post added at 08:28 AM ---------- Previous post was at 07:50 AM ----------
THANK YOU SO MUCH !!! i flashed the miui file over the rom and it worked perfectly, i can now go youtube and netflix !!! i love this community who answer ver fast, love you predragiPredrag ! :good:
Click to expand...
Click to collapse
maujogue said:
[/COLOR]THANK YOU SO MUCH !!! i flashed the miui file over the rom and it worked perfectly, i can now go youtube and netflix !!! i love this community who answer ver fast, love you predragiPredrag ! :good:
Click to expand...
Click to collapse
I am glad I could help Don't forget to bookmark this page
https://basketbuild.com/devs/yshalsager/Xiaomi-Firmware/Developer
And stay up to date with FW files
I have already did it, how much time do you think i have to wait between each update ?
I have already did it, how much time do you think i have to wait between each update ?
---------- Post added at 12:56 PM ---------- Previous post was at 12:53 PM ----------
I have already did it, how much time do you think i have to wait between each update ?
And i have a last question for you, which rom on Android 8.1 do you think is the best for my mi5s ?
Im lost of the pletory of roms available...
Well they say that Atomic has best battery life, LOS is getting fix for restarts and battery drain with todays build.
Also, from recent posts best DEV FW is 8.3.1 or STABLE FW 9.5.1.0 if you are going to LOS15.1.
I am still on Viper OS, and I am waiting a little bit more on 8.1 roms to iron out small issues and quirks
I'm back unfortunately... My problem is back... When I boot my phone I've no problem I can read all videos but after 1or2 hours on, my problem come back ! I don't do one thing specially and I don't really know what to do now..
I tried to install the last CN firmware 8.3.8, tell me if I did something wrong, ty for your time.
NO DATA LOSS - NO NEED TO CHANGE ROM - NO NEED FOR ALTERING PROP FILE
You need to have a custom recovery (TWRP etc.)
1. Download the latest firmware (or anyone you like) from the link. https://basketbuild.com/devs/yshalsa...obal/capricorn
2. Flash it using custom recovery. THATS IT!
This does not effect your current rom it only changes some files (as you can guess from the size of file)
I have this problem on my Poco F1. I did all I could jumping from one rom to another, clean flashing miui roms to start with but nothing worked. What only works is an outdated version of a custom rom based on LOS. Also tried all the solutions in this thread but nothing worked. If someone is facing the same issue, your help will be truly appreciated. I cannot update my phone because of this damn issue.
ubkorkut said:
NO DATA LOSS - NO NEED TO CHANGE ROM - NO NEED FOR ALTERING PROP FILE
1. Download the latest firmware (or anyone you like) from the link.
2. Flash it using custom recovery. THATS IT!
Click to expand...
Click to collapse
Is there also a solution for that problem on the Mi 6 with LOS 16?
autisticarvin said:
I have this problem on my Poco F1. I did all I could jumping from one rom to another, clean flashing miui roms to start with but nothing worked. What only works is an outdated version of a custom rom based on LOS. Also tried all the solutions in this thread but nothing worked. If someone is facing the same issue, your help will be truly appreciated. I cannot update my phone because of this damn issue.
Click to expand...
Click to collapse
Did you find the described location on your phone? I can't find that file at my Xiaomi Mi 6.
Code:
2. download 'buildprop' from play store
3. Probably the first 'audio.deep_buffer.media' in 'AUDIO' is 'True'
My build prop don't have audio.deep_buffer.media file in it please help me out. I have installed corvus ROM on poco f1 and tried everything please. Only thing that work with sound is my notification and calls
Did anyone use xiaomi mix 2 with android auto? I got a black screen on my car.
MIUI 9.1 | Stable
9.1.9.0 (NDECNEI)
jeffreyQC said:
Did anyone use xiaomi mix 2 with android auto? I got a black screen on my car.
MIUI 9.1 | Stable
9.1.9.0 (NDECNEI)
Click to expand...
Click to collapse
Yes, although the USB C cable in the box (and a few others I tried) didn't work - I ended up using the cable that came with my Nexus 6p.
I have an issue with waze not updating gps, but google maps works fine and everything else works.
Sent from my Mi MIX 2 using Tapatalk
KevinLuong said:
Yes, although the USB C cable in the box (and a few others I tried) didn't work - I ended up using the cable that came with my Nexus 6p.
I have an issue with waze not updating gps, but google maps works fine and everything else works.
Sent from my Mi MIX 2 using Tapatalk
Click to expand...
Click to collapse
What ROM you have installed? or any other difference we had?
Mine just doesn't seems loading on the car.
jeffreyQC said:
What ROM you have installed? or any other difference we had?
Mine just doesn't seems loading on the car.
Click to expand...
Click to collapse
Global ROM, MIUI 9.1.2 or whatever the latest build is.
It wouldn't load for me either (or would flash briefly on the screen then go black) until I used a cable that worked.
I'm on china ROM, i guess i need to install the global ROM.
But when i try to get it unlocked it seems the unlock tool skipped the apply for permission step, I'm not able to flash it.
jeffreyQC said:
I'm on china ROM, i guess i need to install the global ROM.
But when i try to get it unlocked it seems the unlock tool skipped the apply for permission step, I'm not able to flash it.
Click to expand...
Click to collapse
Used it with weekly DEV MIUI 7.11.2/9/16/23 from xiaomi.eu without issues on Skoda Kodiaq on USB-Port with 3rd Party Micro-USB cable and USB-C adapter.
Thanks, I will try to flash it to a different ROM and try it out.
On global ROM it took a VERY long time to connect and load up, I just left it plugged in for about 5/6 minutes before it came up in my VW.
It's a lot better on Xenon HD ROM I'm using now, no delay at all.
Flashed to the global ROM.
It connected to my chevy works, the only thing is that waze is not updating(google maps worked)
???
jeffreyQC said:
Flashed to the global ROM.
It connected to my chevy works, the only thing is that waze is not updating(google maps worked)
Click to expand...
Click to collapse
284/5000
Does it work with the global rom? I have installed the stable chinese rom V9.1.4.0.NCHCNEI (MIUI9) in my note 3 but when connecting to the android car it freezes and remains in black screen. I do not know if it's because of the ROM or because of the type-C cable, I'm using the original cable that came with the phone.
Mahuito08 said:
284/5000
Does it work with the global rom? I have installed the stable chinese rom V9.1.4.0.NCHCNEI (MIUI9) in my note 3 but when connecting to the android car it freezes and remains in black screen. I do not know if it's because of the ROM or because of the type-C cable, I'm using the original cable that came with the phone.
Click to expand...
Click to collapse
It does, it's 100% not your cable, it's the ROM.
Global ROM is not 100% issue free, there are other issues with google voice control and not able to use my voice to sent message etc. but at least android auto works with google map for me.
Im thinking to try EU ROM later but for now gonna stay with global, don't feel like installing all the apps and stuff, too much work. lol
jeffreyQC said:
It does, it's 100% not your cable, it's the ROM.
Global ROM is not 100% issue free, there are other issues with google voice control and not able to use my voice to sent message etc. but at least android auto works with google map for me.
Im thinking to try EU ROM later but for now gonna stay with global, don't feel like installing all the apps and stuff, too much work. lol
Click to expand...
Click to collapse
excellent to hear this, I will try to install the global rom and see what results I have. What global rom have you installed? I see that the last one that appears is the 9.1.4 :good: