Develop Bugs

ROM UPDATED May 19, 2015 [ROM] LP 5.1 Resurection-Remix Hardened Unofficial

Rom updated on May 19. This is LP 5.1 release 2. Latest Google/CM/Resurrection sources + all hardened features. Plus cleaned IP addresses (got rid of Google, Level 3 communication, AT&T, Orange, Department of Defense and other shady ips). Also enabled is Volte (enhanced LTE), which is Voice over LTE. This depends on the service provided by your carrier. In the States, for example, T-Mobile provides such services, which include high definition voice. Usually, you need special update done by the manufacturer in conjunction with your carrier. This rom does not need that. Your Z1 is already provisioned for Volte. You will see in Mobile Settings another entry: Enhanced 4g LTE Mode. ALso, in test menu/phone (*#*#4636#*#*), you will see a Volte Provisioned Flag. So, as soon as your carrier starts Volte, you are all set.
Sources are the same...
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12531
_____________________________________________________________________________________
Rom updated to latest sources on May 4. In addition to regular hardened features, more than 40 instances of Google IP, Level 3 Communication and Department of Defense IPs removed from sources both for IPV4 and IPV6. The same is replaced with Opendns IP. Keep in mind that those ips go not only in configuration files, but libs also and the latter cannot be decompiled and fixed...
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=12289
______________________________________________________________________________________
Rom Updated to LP 5.1.1. All hardened/security features implemented. Kernel used from Slimroms 5.1.
TWRP 2.8.6 is integrated in kernel.
Obviously, this is an alpha version...
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12110
Kernel Source: https://github.com/AOSP-Argon/kernel_sony_msm8974/tree/lp5.1
___________________________________________________________________________________________________
Rom updated to 5.1: all hardened features enabled.
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=11901
___________________________________________________________________________________________________
March 31: kernel updated to include screen color calibration:
See Download link: http://forum.xda-developers.com/showpost.php?p=59801528&postcount=94
_________________________________________________________________________________________________
March 27: New build is up, latest CM and Resurect changes; kernel includes voltage table, syncookie and TWRP.
Download Link: http://d-h.st/lw2s
Mirror Link: http://forum.xda-developers.com/devdb/project/dl/?id=11744
_________________________________________________________________________________
March 15: New build is up including latest sources, TWRP integrated in kernel, led lights fixed
DOWNLOAD LINK: http://d-h.st/UO7W
_______________________________________________________________________________________________
Marchh 7: Rom Updated to the latest version + plus all security enhancements. Sources for security changes are the same as posted
See Download section for update
Here is Resurection Remixed Lollipop hardened and secure. Built from sources on February 24.
Changes:
First of all, as many know, encryption on lollipop slows down the device to almost unusable. I was able to resolve that. The culprit was Qualcom crypto module and drivers that collide with graphics. In this rom, when you encrypt your device, there is no noticeable slow down at all. Your master encryption key is no longer stored in crypto module (which rumor has it is backdoored anyway), but rather hashed and salted on the drive itself.
1. Modified kernel to disable creepy SElinux and enable Tomoyo security. Now you can safely use Xposed framework and some modules such as Xprivacy, Appsettings and ShowDialpad, as well as many others
2. Modified kernel to disable qualcom module and drivers
3. Disabled creepy qualcom random number generation and enabled all other methods
4. Enabled 256 bit AES drive encryption as opposed to Google's default 128 bit
5. Enabled all ciphers and hashes available in kernel and disabled by default (thanks Sony and Google)
6. Latest CM changes
7. Omniswitch (to be flashed separately after flashing the rom)
Maybe more
INSTALL:
1. Be on Kitkat, rooted with CWM or TWRP
2. Enter Recovery, wipe System, Data, Cache
3. Flash the rom
4. Flash Omniswitch
5. Reboot and enjoy
If you want to encrypt your device, you need to do 2 additional steps before or after encryption. Go to Developer Options and enable "Force GPU rendering" and "Disable HW overlays. Yes, you have to enable (not disable) "Disable HW overlays" option. The latter won't stick after reboot. So, manually transfer the attached init.d script to /system/etc/init.d and set permissions to at least 744. This way the option will be set at boot and you won't have any noticeable slowdown. In fact, I don't see any difference in speed between encrypted and non encrypted device.
CREDIT: Resurection-Remix Team, Cyanogenmod, AOSP and Omniroms
WARNING:
I am not responsible if your device explodes and kills everyone around. You are doing it on your own. Russians, who are definitely coming, won't help you either :laugh:
Download links
Rom: http://d-h.st/l1rB For Update see Download Section
Omniswitch: http://d-h.st/AbGH
Init.d script (in case you want to encrypt your data): http://d-h.st/QIiE
Sources: https://github.com/ResurrectionRemix
https://github.com/HonamiZ1/android_system_vold
https://github.com/HonamiZ1/kernel_sony_msm8974
XDA:DevDB Information
Resurection-Remixed Lollipop 5.1.1 Hardened, ROM for the Sony Xperia Z1
Contributors
optimumpro
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP, Cyanogenmod
Version Information
Status: Testing
Created 2015-02-25
Last Updated 2015-05-19

screenshots
Screenshots added

Kernel updated with CPU voltage table
Kernel updated to allow under/over volting. See attachment.
Instructions:
1. Unzip the file
2. Flash in fastboot: fastboot flash boot boot.img and fastboot reboot
Enjoy

Thanks for this ROM, are there any known bugs?

wis3m0nkey said:
Thanks for this ROM, are there any known bugs?
Click to expand...
Click to collapse
All CM bugs as of February 24. You can go on their site and see the list of changes...

optimumpro said:
All CM bugs as of February 24. You can go on their site and see the list of changes...
Click to expand...
Click to collapse
So just need to look at http://forum.xda-developers.com/xperia-z1/general/rom-official-cyanogenmod-12-nightlies-t3007118 is that right?
Sorry I have to confirm, there are multiple threads (Official/Development) for CM12.
This ROM will maintain root and recovery, right?
I'll flash and let you know if I find any other issues.

Tried it. Works great. Some strange problem with mms though. Could not load them even though data works perfectly. Battery life looks great. Didn't try calling so i can't say anything about the mic.

Kyrius said:
Tried it. Works great. Some strange problem with mms though. Could not load them even though data works perfectly. Battery life looks great. Didn't try calling so i can't say anything about the mic.
Click to expand...
Click to collapse
I use Textsecure as sms replacement. Microphone works great...

Very buggy
you should definately fix this rom as i cannot start camera it fc. it restart itseft
NOT STABLE

darkdevu said:
you should definately fix this rom as i cannot start camera it fc. it restart itseft
NOT STABLE
Click to expand...
Click to collapse
1. Learn the rule about not posting bug reports without logcat
2. Camera works fine: verified
3. Always wipe System/Data/Cache before flashing
4. Are you sure you have Xperia Z1?
Cheers

his profile says Z3. lol

Any further reports on this ROM? Interesting to know how it performs and about stability

Deleted

wis3m0nkey said:
Thanks for this ROM, are there any known bugs?
Click to expand...
Click to collapse
Rom Updated to the latest version. See Download section in the OP.

and where is the link to the update?

shikimafia said:
and where is the link to the update?
Click to expand...
Click to collapse
It is in Download section:
http://forum.xda-developers.com/devdb/project/?id=8412#downloads

Screenshots added in post #2. Note that only this rom and SlimLP work with the latest Xpivacy module. Tried on Crdroid and others and there is bootloop as soon as you enable Xprivacy.

Has no one tried this rom as not reports or posts
tried flashing update from scratch and get play services fc on every gapps i used............i am guessing i may have to flash initial release and dirty flash this over it? excuse me if i may have got it wrong

shingers5 said:
Has no one tried this rom as not reports or posts
Click to expand...
Click to collapse
Well. The first version had 69 downloads. The latest one had 20. Other than the bogus claim about camera foreclosing (by someone who has Xperia Z3) there were no reports of problems. I have been using this rom for about 10 days without any problems...

optimumpro said:
Well. The first version had 69 downloads. The latest one had 20. Other than the bogus claim about camera foreclosing (by someone who has Xperia Z3) there were no reports of problems. I have been using this rom for about 10 days without any problems...
Click to expand...
Click to collapse
I'm having issues flashing the new version as getting play services errors.... Was gonna try dirty flash over previous versions

[ROM][P901][UNOFFICIAL] CyanogenMod 13.0 | Android 6.0.1 Marshmallow | 20161211

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial CyanogenMod 13.0 builds for v1a3g (SM-P901). The following will not be supported here:
* Custom kernels
* Mods
* Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
* Flashed a custom kernel
* Installed or did mods from untrusted sources
* Modified system files
NOTICE:
This ROM may still have some bugs (although minor). Most things work except:
mic
Ok Google
S-Pen works with S-Pen apps (paint, notes, etc.). No popup will appear on removal.
If you find other issues (CM13 issues) please post them. May take a while to fix but they will be worked on.
ALSO - please DO NOT ask about CM14 - it is being looked into - no other info available.
Installation
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Install the Google Apps addon package (Optional)
Reboot
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog&hl=en
Downloads
12/11 build
Google Drive: SM-P901-CM13
Mega Drive: SM-P901-CM13
One Drive: SM-P901-CM13
Old Downloads
Changelog:
12/11
Initial Release
Google Apps:
http://opengapps.org/- thanks to the OpenGapps team!
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree: https://github.com/exynos5420/android_device_samsung_ha3g
Credits:
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
@tincho5588(For testing my builds on device)
Exynos5420 Dev Team (@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart)

This rom requires the Marshmallow boot loader.

gcrutchr said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial CyanogenMod 13.0 builds for v1a3g (SM-P901). The following will not be supported here:
* Custom kernels
* Mods
* Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
* Flashed a custom kernel
* Installed or did mods from untrusted sources
* Modified system files
NOTICE:
This ROM may still have some bugs (although minor). Most things work except:
mic
Ok Google
S-Pen works with S-Pen apps (paint, notes, etc.). No popup will appear on removal.
If you find other issues (CM13 issues) please post them. May take a while to fix but they will be worked on.
ALSO - please DO NOT ask about CM14 - it is being looked into - no other info available.
Installation
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Install the Google Apps addon package (Optional)
Reboot
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog&hl=en
Downloads
12/11 build
Google Drive: SM-P901-CM13
Mega Drive: SM-P901-CM13
One Drive: SM-P901-CM13
Old Downloads
Changelog:
12/11
Initial Release
Google Apps:
http://opengapps.org/- thanks to the OpenGapps team!
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree: https://github.com/exynos5420/android_device_samsung_ha3g
Credits:
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
@tincho5588(For testing my builds on device)
Exynos5420 Dev Team (@deadman96385 @[email protected]@[email protected]@[email protected]@thermskin, @javelinanddart)
Click to expand...
Click to collapse
After one day , I found some bugs.
This cm ROM doesn't detect current battery status correctly. I plugged my charger to sm-p901 , unfortunately after 12 hours the battery status represents "50 %".
Second bug is WiFi . I have to select a bandwidth from 1 to 13 manually to connecting into my home wireless router.
Hope you fix this. Thank u so much

mohsenfa01 said:
After one day , I found some bugs.
This cm ROM doesn't detect current battery status correctly. I plugged my charger to sm-p901 , unfortunately after 12 hours the battery status represents "50 %".
Second bug is WiFi . I have to select a bandwidth from 1 to 13 manually to connecting into my home wireless router.
Hope you fix this. Thank u so much
Click to expand...
Click to collapse
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.

gcrutchr said:
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.
Click to expand...
Click to collapse
There is serious problem with battery, therefore there are so many apps which claim to calibrate battery, which one do you suggest to use?

mohsenfa01 said:
There is serious problem with battery, therefore there are so many apps which claim to calibrate battery, which one do you suggest to use?
Click to expand...
Click to collapse
Never used a battery calibration app - usually wait for green light to come on so I know battery full.
I suggest do a google search for cynogenmod and battery charging issue.

gcrutchr said:
Never used a battery calibration app - usually wait for green light to come on so I know battery full.
I suggest do a google search for cynogenmod and battery charging issue.
Click to expand...
Click to collapse
OK , how about s pen smart text selection?

mohsenfa01 said:
OK , how about s pen smart text selection?
Click to expand...
Click to collapse
If you are looking for the s-pen to work for everything like a Samsung rom, it won't.
As I stated in post #1, the s-pen works with apps that support it.

gcrutchr said:
If you are looking for the s-pen to work for everything like a Samsung rom, it won't.
As I stated in post #1, the s-pen works with apps that support it.
Click to expand...
Click to collapse
Ok, this rom have issue to connecting into wireless routsr with auto band

gcrutchr said:
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.
Click to expand...
Click to collapse
I found there is serious WiFi channel issue in all marshmallow devices, just google these words:
Marshmallow WiFi channel
It seams this android version has disability to find WiFi units with channel 13 or 1. What's your opinion ?

mohsenfa01 said:
I found there is serious WiFi channel issue in all marshmallow devices, just google these words:
Marshmallow WiFi channel
It seams this android version has disability to find WiFi units with channel 13 or 1. What's your opinion ?
Click to expand...
Click to collapse
My wifi router (Thailand) has channels 1-13. I have no problem connecting with this rom or any other, including my Galaxy S3 which is on CM, my iPad Pro, my Note 5 and my Note Pro 12.2 (3g).
Did you clear the data before installing rom? Did you clear cache and dalvik cache?
Try downloading WIFI Analyzer on Play Store....maybe it will help.

Modem?
The sm-p901 has LTE, is this rom has it???? or I need to install custom

timmyhoa34 said:
The sm-p901 has LTE, is this rom has it???? or I need to install custom
Click to expand...
Click to collapse
This device should only have 3G.

timmyhoa34 said:
The sm-p901 has LTE, is this rom has it???? or I need to install custom
Click to expand...
Click to collapse
The SM-P901 does not have LTE. It is a 3G device.
There is nothing you can install to get LTE. LTE is part of the modem and the only Note Pro 12.2 device that has it is the P905 series.

Excellent
Thanks for this beautiful 6.0.1 ROM....great boost from stock 5.0.2 which was sluggish...very fast and stable...no issues to complain up to now...really appreciate you guys!!!

MyoMinhtoo said:
Thanks for this beautiful 6.0.1 ROM....great boost from stock 5.0.2 which was sluggish...very fast and stable...no issues to complain up to now...really appreciate you guys!!!
Click to expand...
Click to collapse
You're welcome!

Is it possible to switch from android to another one ? Like Ubuntu or windows 10 ?

mohsenfa01 said:
Is it possible to switch from android to another one ? Like Ubuntu or windows 10 ?
Click to expand...
Click to collapse
Windows 10? No
Linux? I have read about people running linux on an android tablet. Search XDA for the thread. It's under Android Software Development or Android Software and Hacking General.

Thank you.
How can i compile from source code?

e-sh said:
Thank you.
How can i compile from source code?
Click to expand...
Click to collapse
In the 1st post there are links to the source code. You need to set up your computer 1st to build android.
Then you can get the base android source from github and the v1a3g source code from the link in post #1.

| ROM | LineageOS 14.1 | unofficial | 27/02/2017 | Signature Spoofing integrated |

Hello
I am going to release unofficial builds of LineageOS 14.1 for Wileyfox Crackling. The builds will be updated every month after a new security patch level is reached.
The build I made can be flashed on top of Cyanogenmod 13 build (with wiping dalvik and cache). It should work without any problems; I do not experience any.
But I do not take any responsibility if your favorite app/setting/etc. is not working anymore.
If it makes problems, wipe data/dalvik/cache and install again.
Besides that the ROM has two extra features:
I patched signature spoofing support into the ROM. Now it is possible to install microG. This is a re-implementation of Google’s proprietary Android user space apps and libraries. So for many cases you do not have to install the proprietary GAPPS anymore.
Note: This feature is disabled by default and will not affect the ROM in any way. It has to be enabled in the according settings.
Also, there's an option available to record calls now. Please respect the privacy of others.
Android security patch level:
Code:
[URL="https://source.android.com/security/bulletin/2017-02-01.html"]February[/URL] | 2017-02-05 security patch level
Version/Filename:
Code:
lineage-14.1-20170227-UNOFFICIAL-crackling.zip
Download:
Code:
[B][SIZE="2"]Openload.co:[/SIZE][/B]
https://openload.co/f/DBKYItUGllA/lineage-14.1-20170227-UNOFFICIAL-crackling.zip
https://openload.co/f/grRwId0HJJE/lineage-14.1-20170227-UNOFFICIAL-crackling.zip.md5sum
Alternativ:
[B][SIZE="2"]Free.fr:[/SIZE][/B]
http://dl.free.fr/uqIBAf8dM
The kernel and device sources I used to build the ROM can be found here:
Code:
https://github.com/lineageos

thomson.aa said:
Hello
This is my first build of LineageOS for Wileyfox Crackling.
I flashed it on top of my Cyanogenmod 13 build (with only wiping dalvik and cache) and it so far works without any problems.
But I do not take any responsibility if your favorite app/setting/etc. is not working anymore.
This release has the root access option disabled because LineageOS disables root for apps by default. It has to be enabled before building the rom - I didn't know that so I will provide an updated rom with root access for apps available.
Besides that the rom has one extra feature:
I patched signature spoofing support into the rom. Now it is possbible to install microG. This is a re-implementation of Google’s proprietary Android user space apps and libraries. So for many cases you do not have to install the proprietary GAPPS anymore.
Note: This feature is disabled by default and has to be enabled in the according settings.
Android security patch level:
Code:
[URL="https://source.android.com/security/bulletin/2017-01-01.html"]January[/URL] | 2017-01-05 security patch level
Version/Filename:
Code:
lineage-14.1-20170117-UNOFFICIAL-crackling.zip
Download:
Code:
https://openload.co/f/WCt_JxGZ-UE/lineage-14.1-20170117-UNOFFICIAL-crackling.zip
Click to expand...
Click to collapse
Sorry thomson.aa sorry i do not have english my google translation. Work is very nice thanks one has a mistake sim card people do not see a way to solve it? I wish you continued success.

Where is the source ? You can't post this without kernel source

I dirty flashed this over crDroid and it seems to be working pretty well. Thanks.
All my app's (not many at the moment) were working fine.
Playstore thinks it's 'no carrier Wileyfox Wileyfox Swift'... but I guess that's better than 'Wileyfox Pixel XL' (crDroid).
On initial booting the status bar wouldn't pull down but works ok after a reboot.
Buttons were a bit messed up which only gave me a back button even though the usual defaults were all set. After deleting them and re-adding them they worked fine. I'm guessing this may be due to dirty flashing. Shame the button customisation is just as basic as cm13 especially after using crDroid.
Using Kernal Auditor Mod I see that the cpu only scales down to 800mhz and the gpu scales up to 400mhz. I don't know much about this but won't this make it a little power hungry?
Going through the settings, I'm thinking that LOS14 isn't quite as complete as the cm13 I was using a few weeks ago. Although I guess this is to be expected at this stage. And I'm used to the more versatile crDroid now so I'll be restoring that in a mo.
This MicroG project sounds great. It seems a bit complex to get it working as I'd like but I definitely be having a go when I get my head around it.
All in all, Great job. Keep up the good work... please. I'm already waiting for the next release.
Oh, and er... Surely you could find a better file host???

I tried to build the Image myself by using your other Thread's How-To and after flashing i had no WIFI.
Now i flashed this build and WIFI is also not working.
[Edit]
I've collected some Logs - perhaps they'll help.
[Edit2]
Now i tried another '14.1-ROM' and i've the same problem....
During all my Tests the shown MAC-Address during the 'inital install' was weird: 02:00:00:00:00:00.
Before the 14.1 Lineage i had the latest CMmod 13 running without any Problems :/

Ok - solved it....
I encrypted my Device during CM13 and always entered my Key during Boot/TWRP and Formatting/Installation of 14.1.
Now i *really* formated all the Data (and the former encryption), rebooted to Recovery and sideloaded the Image+Gapps.
Now WIFI is working.

How do I enable signature spoofing ? I can't find any relevant setting.

M.A.K said:
How do I enable signature spoofing ? I can't find any relevant setting.
Click to expand...
Click to collapse
Settings -> Apps -> Gear symbol -> App permissions -> Spoof package signature

No... it's not there for me.

M.A.K said:
No... it's not there for me.
Click to expand...
Click to collapse
Works like it is supposed to be. The setting/app permission is only available if you install an app that requires that permission.
So, if you install microG the setting for signature spoofing will become available.

fred0r said:
Now i *really* formated all the Data (and the former encryption)
Click to expand...
Click to collapse
Could you tell me how to do that? I remember trying to find a way to remove encryption back in the day on my Nexus 5 and wasn't able to do it. Thanks!

thomson.aa said:
Works like it is supposed to be. The setting/app permission is only available if you install an app that requires that permission.
So, if you install microG the setting for signature spoofing will become available.
Click to expand...
Click to collapse
Ah, yes... got it now, thanks.

jobedius said:
Could you tell me how to do that? I remember trying to find a way to remove encryption back in the day on my Nexus 5 and wasn't able to do it. Thanks!
Click to expand...
Click to collapse
I booted into the TWRP 3.0.3 and did not enter my Encryption-PW (cancel) and then clicked 'Wipe' and then 'Format Data'.

update to official build?
Is it possible to update (aka dirty flash) to the now released official build? I had some problems doing that, see https://forum.xda-developers.com/showpost.php?p=70829582&postcount=8
Cheers

Nope, its not
Mithodin said:
Is it possible to update (aka dirty flash) to the now released official build? I had some problems doing that, see https://forum.xda-developers.com/showpost.php?p=70829582&postcount=8
Cheers
Click to expand...
Click to collapse
Twrp shows error 7(the data is incompatible). You need to wipe data, cache partitions and the system partition. Then install the zip with arm64 android 7.1 g-apps.
Cheers:good:

fred0r said:
I booted into the TWRP 3.0.3 and did not enter my Encryption-PW (cancel) and then clicked 'Wipe' and then 'Format Data'.
Click to expand...
Click to collapse
Aahhh, that makes sense if you know it! Thanks!

[ROM][FINAL][9.0] LineageOS 16.0 for Xperia ZL

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.x (Pie),​which is designed to increase performance and reliability over stock Android for your device.​​All the source code for LineageOS is available in the LineageOS GitHub repo.​And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.​​Official LineageOS website : http://lineageos.org​​
Downloads Links
LineageOS 16.0 (Unlocked Bootloader) :​Test builds :
lineage-16.0-20191019-UNOFFICIAL-odin.zip | by CyberWalkMaN for Xperia ZL
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
​​Google Applications (optional) :​OpenGapps : http://opengapps.org/ (Use packages for ARM, Android 9.0, Nano or Pico)​Information : Flash the GApps before the first boot. If not, a clean flash is recommended.​​Flashing and updating​LineageOS clean install :​- (Optional) Flash the boot.img kernel from the ROM zip with Fastboot or Flashtool​- (Optional) Wipe the data & cache (Backup to make sure not to loose data)​- Flash the LineageOS ROM zip from the Recovery​- (Optional) Flash the GApps to have the Google Applications​- (Optional) Every additional zip you want to flash​- Reboot​​LineageOS update / upgrade :​- (Information) Don't wipe anything unless you want to​- (CM / UNOFFICIAL) Nothing to wipe when switching​- (FUTURE RELEASES) Might need clean, informations will be updated​- Flash the latest LineageOS ROM zip from the Recovery​- (Optional) Flash the GApps on first install / upgrade. Not required later, but do update sometimes​- (Optional) Every additional zip you want to flash​- Reboot​​LineageOS addonsu for root access :​- (Information) Read the Root section of the Q&A thread​- (Download) Download the addonsu for arm : LineageOS Downloads / Extras​- (Optional) Flash the zip on a working Lineage installation (once)​- (Information) Upon ROM updates, the addonsu is preserved​- Reboot​​
​Issues and reports​- Report issues only if you are using the ROM kernel​- If an additional mod is installed, make sure it's unrelated, and mention it​- Make sure the issue wasn't discussed earlier in the threads​- Share a log of the error with CatLog for example​​
​About LineageOS Legal : http://lineageos.org/legal/​​The LineageOS team would like to thank everyone involved​in helping with testing, coding, debugging & documenting! Enjoy!​​
​Also thanks to :​- The LineageOS Team​- The CyanogenMod Team​- Everyone involved in working and testing​
XDA:DevDB Information
[ROM][FINAL][9.0] LineageOS 16.0 for Xperia ZL, ROM for the Sony Xperia ZL
Contributors
CyberWalkMaN, AdrianDC
Source Code: https://github.com/fusion3-common
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2019-04-22
Last Updated 2019-10-20

FEATURES AND ISSUES
Code:
- Boot : Ok
- GApps : OpenGApps Nano Ok
- FOTA Recovery : Ok (see below)
- WiFi : Ok (real SONY MAC address)
- Bluetooth : Ok (real SONY MAC address)
- WiFi Hotspot : Ok (2.4GHz only)
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Ok
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- AOSP sensors : Ok
- FM Radio : Ok
- Vibrator : Ok
- Microphone : Ok
- Audio & external audio : Ok
- Bluetooth audio : Ok
- NFC : Ok
- Kernel : Ok
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Ok
- SEPolicies : Work In Progress

At the moment, FM radio, manual network selection and auto brightness does not work (maybe something else). New builds will be uploaded as source updates / bug fixes are updated.

camera ok?

using as a daily cell phone, this is fast, congratulations.

Switch from nkomarn Lineage 16.O build. Camera works okay, so it was great. Only problem is flashing twrp, cannot successful flash using the app. Always go back to lineage recovery even light indicator goes purple to orange. Any workaround?
Also power off function not work, it rebooted. Anyways, it was great and thank you for continue work on this. Cheers! ?
Sent from my Sony Xperia ZL using XDA Labs

Just started testing this Rom, my feedback for now is:
Autorotate is not working.
Can't change any sound (calls, SMS, etc)- (APP crashes).
I've experienced some random reboots in the first few hours after flashing, it seems stable now.
Advanced reboot is not working properly.
Magisk is working fine.
Nova Launcher is working fine.
I'll continue to test...
Hope my feedback can help make this better.

hi, many thanks to develper! smooth running even such older device! the only issue is battery indicator always start from 12% but I am not sure if it is common issue.

Flash the latest build 0803, Sensors are now working. Auto Rotate is working, since sensor driver is there. FM Working properly also.
Still have issue on Turn Off, it keep restarting.
Cannot able to flash Twrp Recovery, still booting to lineage recovery.
But still, thank you for your time on updating this Rom
Sent from my Sony Xperia ZL using XDA Labs

Fiz uma instalação limpa do zero. Há 2 dias estou usando e sem bugs, ou reinicialização inesperada. Ótimo trabalho e muito obrigado por isso =D

New build uploaded (lineage-16.0-20190824-UNOFFICIAL-odin.zip), major changes since May:
All sensors works now (Thanks to @Chippa_a)
Manual network selection fixed
Telegram calls fixed (Need to confirm)
FM Radio fixed
Small gps improvement
Performance improvement
Updated kernel (fixed bug with rebooting instead of shutting down and some other bugs), also we now use binder and lmk from AOSP 3.18 kernel
SELinux denials resolved at 90%
Magisk issue fixed
Android 9.0.0_r46 (August security patches)
Addonsu is already included, you can enable root access in the developer settings

CyberWalkMaN said:
New build uploaded (lineage-16.0-20190824-UNOFFICIAL-odin.zip), major changes since May:
All sensors works now (Thanks to @Chippa_a)
Manual network selection fixed
Telegram calls fixed (Need to confirm)
FM Radio fixed
Small gps improvement
Performance improvement
Updated kernel (fixed bug with rebooting instead of shutting down and some other bugs), also we now use binder and lmk from AOSP 3.18 kernel
SELinux denials resolved at 90%
Magisk issue fixed
Android 9.0.0_r46 (August security patches)
Addonsu is already included, you can enable root access in the developer settings
Click to expand...
Click to collapse
Thank you for the update! I dirty-flashed it over the 0803 build. You see, I run the stable Magisk v19.3, which, along with some modules, then allowed me to pass both Safetynet tests. Not anymore. As you stated that Selinux was almost ready, I had uninstalled ibuprophen's The SELinux Switch app prior to flashing the new build. I was using it in order to set Selinux to enforcing. As Selinux is still off in the new build, I tried to install the app back, but the new build doesn't allow me to do it. Even the zip, although correctly installed in recovery, after booted up, no SELinux Swich app is in the drawer, because directory /data/app/com.ibuprophen.selinux-1 has been deleted during the boot up process! What's happening?
EDIT: I decided to do a clean install. Everything is back to normal! Thanks, anyway!

Pixel Launcher
Thanks again for your hard work in bringing Android 9 to this very old, but still powerful, device of ours.
Well, I prefer Pixel Launcher over the embedded home app, but it keeps crashing all the time upon being selected as the default home app. For those who also plan to use Pixel Launcher, edit /data/system/packages.xml, and add up the following entries, under <package name="com.google.android.apps.nexuslauncher"> and <perms>:
Code:
<item name="android.permission.STATUS_BAR" granted="true" flags="0" />
<item name="android.permission.MANAGE_ACTIVITY_STACKS" granted="true" flags="0" />
Could you make such changes in your next build?

After flashing the 0824 build, i experienced much better scrolling experience, performance improved a lot.
Also Twrp works now and turn off function work properly, no need to reboot and press volume down go to stock recovery just to turn this off. So thank you for continue working on this
Sent from my Sony Xperia ZL using XDA Labs

I thank you for continuing to develop! I'll install that, i report issues!

Perfect, bug-free, fast and stable ROM, using with magisk, everything runs perfectly.

New build uploaded (lineage-16.0-20191019-UNOFFICIAL-odin.zip), major changes since August:
Fast battery drain fixed (for 15.1 nightlies too)
SELinux denials resolved at 99% (You can make builds in enforced SELinux, but I would recommend continuing to build them in permissive). Current build in permissive SELinux.
Oktober security patches
Minor performance and stability improvements (for 15.1 nightlies too)
Added missing props for gps and Miracast.
Build status - Stable.
Addonsu is already included, you can enable root access in the developer settings
This is where my support for android 8-9 for Z/ZL/ZR/Tablet Z ends, this build will be the last. All the changes made in the sources are already available on github.com/LineageOS, if someone wants to continue supporting and get the official LineageOS 16.0 - write to PM, I will explain in detail what remains to be done in the sources. Also, if someone wants to try to build other roms for our devices based on android 8-9 from the available sources - try to choose CAF-based roms (for example, AOKP, LineageOS, Ressurection Remix, AICP, etc.), then with 95% chance you will build and run the rom. Our sources are based on CAF, and for the build of roms based on AOSP, additional fixes are required, plus there will be problems with sound anyway.
I also want to note that I made a most part of the changes made in 16.0 to the official 15.1 nightlies, which should significantly improve their stability and performance

CyberWalkMaN said:
New build uploaded (lineage-16.0-20191019-UNOFFICIAL-odin.zip), major changes since August:
Fast battery drain fixed (for 15.1 nightlies too)
SELinux denials resolved at 99% (You can make builds in enforced SELinux, but I would recommend continuing to build them in permissive). Current build in permissive SELinux.
Oktober security patches
Minor performance and stability improvements (for 15.1 nightlies too)
Added missing props for gps and Miracast.
Build status - Stable.
Addonsu is already included, you can enable root access in the developer settings
This is where my support for android 8-9 for Z/ZL/ZR/Tablet Z ends, this build will be the last. All the changes made in the sources are already available on github.com/LineageOS, if someone wants to continue supporting and get the official LineageOS 16.0 - write to PM, I will explain in detail what remains to be done in the sources. Also, if someone wants to try to build other roms for our devices based on android 8-9 from the available sources - try to choose CAF-based roms (for example, AOKP, LineageOS, Ressurection Remix, AICP, etc.), then with 95% chance you will build and run the rom. Our sources are based on CAF, and for the build of roms based on AOSP, additional fixes are required, plus there will be problems with sound anyway.
I also want to note that I made a most part of the changes made in 16.0 to the official 15.1 nightlies, which should significantly improve their stability and performance
Click to expand...
Click to collapse
Thanks for your hardwork and making a stable build, but i encounter issue Installing it.
Clean Flash it including system, but result in Rebooting to twrp, tried to flash previous Build then Update, stuck to Boot Animation and Reboot to Twrp. I'm quite sure the file is not corrupted, downloaded it two times. Sadly it was the Final build but hoping you will address and fix it. Thanks
[Updated]

Hello!!
Kran007 said:
Thanks for your hardwork and making a stable build, but i encounter issue Installing it.
Clean Flash it including system, but result in Rebooting to twrp, tried to flash previous Build then Update, stuck to Boot Animation and Reboot to Twrp. I'm quite sure the file is not corrupted, downloaded it two times. Sadly it was the Final build but hoping you will address and fix it. Thanks
[Updated]
Click to expand...
Click to collapse
Could you try the rom? or you can't intall it anyway? I gonna try it in the xperia zl that i will give to my father, but i can't get some error, He gona kill me! Actually , his ZL is running august version.

Can someone make a Build with December Security Patch?

[10.0][STABLE] AOSiP Quiche beta

Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Display > lockscreen > advanced settings (this wont to do anything)
- Instagram video recording (You will sound like a robot)
- Wi-Fi display reboots the phone
- Green pictures when using the stock camera/ Whatsapp in lowlight (this is related to YUV processing). Use provided gcam instead.
- Report unknown bugs with logs please!
Instructions :
Clean flash:
- Flash latest Pie ROM by Xiaomi (10.0.13.0). You may use option to retain userdata.
- Use fastboot to boot to latest TWRP.
- Falsh the TWRP installer zip and Force-encryption-disabler zip
- Reboot to TWRP
- Flash the ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Dirty flash (upgrade from existing AOSiP 9 install):
- Reboot to TWRP
- Factory reset in TWRP. No need to wipe userdata! (Skip if you are on ten already)
- Flash ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Note: It is strongly advised to make a backup before upgrading!
Downloads :
Download from Sourceforge
Open GApps Note: OpenGAPPS for ten now officially out, so link changed. Nano package is still recommended!
Recommended Gcam
Kernel Source
Device Tree
Vendor Tree
Props to all the guys from daisy-development-q and especially Lyceris-chan!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
Lyceris-chan
Tunasahinn
acras01
pawelik001
Offain/33bca
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27

Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?

gumka77 said:
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
Click to expand...
Click to collapse
I used the OpenGAPPS from test folder I linked in the OP. Bit... might work, but no guarantee. Just try them and report back, so maybe other users can learn from your experiences.
Note: Updated my main phone from AOSiP Pie to Ten and had some wierd issues. Factory resetted in TWRP and now everything working. So making a backup and factory reset before updating is recommended

When viperos q?

Thanks you , I see your sources is stable thanks for upgrade aosip
opal06 said:
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Device side should be fine, but please report all bugs here with logs!
Instructions :
Follow guide by davidrocher: https://github.com/tkchn/daisyinstall
This works for Android 10 too! Please use correct version of OpenGAPPS.
Note: It is strongly advised to make a backup before upgrading and performing a factory reset in TWRP.
Downloads :
Download from Sourceforge
Open GApps
Kernel Source
Device Tree
Props to all the guys from daisy-development-q and especially acras1!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Click to expand...
Click to collapse

i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)

schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
See if this works for you:
View attachment Clock_v1.0.0.zip

Thanks for the rom, what base is needed?, is November security patch?

Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work

opal06, kudos for signature spoofing built-in, I can use microG.

Can i update kernel to Celexas kernel v.2. (from devotag) ?

Thank you all very much for your positive feedback.
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
As for the missing clock, I did not notice it during testing, but you are obviously right. For a stock feeling you can download the Clock app by Google, but there are many other good alternatives.
AOSiP updater is not working because I did not update the OTA file. AOSiP ten is still beta from ROM source side, so I won't enable OTA until it's official from their side.
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
As base any pie base should work, but latest is best.
schmidt_here said:
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
Click to expand...
Click to collapse
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
gumka77 said:
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Click to expand...
Click to collapse
Probably, just try and report. If something goes wrong, go to TWRP and flash ROM again without wiping data. You won't loose any settings or data.

Plis build with nitrogen kernel

test
opal06 said:
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
Click to expand...
Click to collapse
Yes, it's enabled. It doesn't disturb me, maybe i've to make a fresh install and take another version base.
Yesterday i had an issue, i couldn't download from play store until i deactivated and reactivated the app. Also i couldn't install apk's downloaded manualy from website.
Maybe it's a unique incident

schmidt_here said:
Also i couldn't install apk's downloaded manualy from website.
Click to expand...
Click to collapse
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.

celrau said:
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
Click to expand...
Click to collapse
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.

lacia-chan said:
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
Click to expand...
Click to collapse
I just did some reading on this, you are right

Flashing Nitrogen R2 kernel results in bootloop with this rom. R1 works fine. Any fix?

good job

I'm using your rom for 1-2 days now Looks like every features work really well to me. I'l report back later if I see anything. Thanks OP