Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.x (Pie),which is designed to increase performance and reliability over stock Android for your device.All the source code for LineageOS is available in the LineageOS GitHub repo.And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.Official LineageOS website : http://lineageos.org
Downloads Links
LineageOS 16.0 (Unlocked Bootloader) :Test builds :
lineage-16.0-20191019-UNOFFICIAL-odin.zip | by CyberWalkMaN for Xperia ZL
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Google Applications (optional) :OpenGapps : http://opengapps.org/ (Use packages for ARM, Android 9.0, Nano or Pico)Information : Flash the GApps before the first boot. If not, a clean flash is recommended.Flashing and updatingLineageOS clean install :- (Optional) Flash the boot.img kernel from the ROM zip with Fastboot or Flashtool- (Optional) Wipe the data & cache (Backup to make sure not to loose data)- Flash the LineageOS ROM zip from the Recovery- (Optional) Flash the GApps to have the Google Applications- (Optional) Every additional zip you want to flash- RebootLineageOS update / upgrade :- (Information) Don't wipe anything unless you want to- (CM / UNOFFICIAL) Nothing to wipe when switching- (FUTURE RELEASES) Might need clean, informations will be updated- Flash the latest LineageOS ROM zip from the Recovery- (Optional) Flash the GApps on first install / upgrade. Not required later, but do update sometimes- (Optional) Every additional zip you want to flash- RebootLineageOS addonsu for root access :- (Information) Read the Root section of the Q&A thread- (Download) Download the addonsu for arm : LineageOS Downloads / Extras- (Optional) Flash the zip on a working Lineage installation (once)- (Information) Upon ROM updates, the addonsu is preserved- Reboot
Issues and reports- Report issues only if you are using the ROM kernel- If an additional mod is installed, make sure it's unrelated, and mention it- Make sure the issue wasn't discussed earlier in the threads- Share a log of the error with CatLog for example
About LineageOS Legal : http://lineageos.org/legal/The LineageOS team would like to thank everyone involvedin helping with testing, coding, debugging & documenting! Enjoy!
Also thanks to :- The LineageOS Team- The CyanogenMod Team- Everyone involved in working and testing
XDA:DevDB Information
[ROM][FINAL][9.0] LineageOS 16.0 for Xperia ZL, ROM for the Sony Xperia ZL
Contributors
CyberWalkMaN, AdrianDC
Source Code: https://github.com/fusion3-common
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2019-04-22
Last Updated 2019-10-20
FEATURES AND ISSUES
Code:
- Boot : Ok
- GApps : OpenGApps Nano Ok
- FOTA Recovery : Ok (see below)
- WiFi : Ok (real SONY MAC address)
- Bluetooth : Ok (real SONY MAC address)
- WiFi Hotspot : Ok (2.4GHz only)
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Ok
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- AOSP sensors : Ok
- FM Radio : Ok
- Vibrator : Ok
- Microphone : Ok
- Audio & external audio : Ok
- Bluetooth audio : Ok
- NFC : Ok
- Kernel : Ok
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Ok
- SEPolicies : Work In Progress
At the moment, FM radio, manual network selection and auto brightness does not work (maybe something else). New builds will be uploaded as source updates / bug fixes are updated.
camera ok?
using as a daily cell phone, this is fast, congratulations.
Switch from nkomarn Lineage 16.O build. Camera works okay, so it was great. Only problem is flashing twrp, cannot successful flash using the app. Always go back to lineage recovery even light indicator goes purple to orange. Any workaround?
Also power off function not work, it rebooted. Anyways, it was great and thank you for continue work on this. Cheers! ?
Sent from my Sony Xperia ZL using XDA Labs
Just started testing this Rom, my feedback for now is:
Autorotate is not working.
Can't change any sound (calls, SMS, etc)- (APP crashes).
I've experienced some random reboots in the first few hours after flashing, it seems stable now.
Advanced reboot is not working properly.
Magisk is working fine.
Nova Launcher is working fine.
I'll continue to test...
Hope my feedback can help make this better.
hi, many thanks to develper! smooth running even such older device! the only issue is battery indicator always start from 12% but I am not sure if it is common issue.
Flash the latest build 0803, Sensors are now working. Auto Rotate is working, since sensor driver is there. FM Working properly also.
Still have issue on Turn Off, it keep restarting.
Cannot able to flash Twrp Recovery, still booting to lineage recovery.
But still, thank you for your time on updating this Rom
Sent from my Sony Xperia ZL using XDA Labs
Fiz uma instalação limpa do zero. Há 2 dias estou usando e sem bugs, ou reinicialização inesperada. Ótimo trabalho e muito obrigado por isso =D
New build uploaded (lineage-16.0-20190824-UNOFFICIAL-odin.zip), major changes since May:
All sensors works now (Thanks to @Chippa_a)
Manual network selection fixed
Telegram calls fixed (Need to confirm)
FM Radio fixed
Small gps improvement
Performance improvement
Updated kernel (fixed bug with rebooting instead of shutting down and some other bugs), also we now use binder and lmk from AOSP 3.18 kernel
SELinux denials resolved at 90%
Magisk issue fixed
Android 9.0.0_r46 (August security patches)
Addonsu is already included, you can enable root access in the developer settings
CyberWalkMaN said:
New build uploaded (lineage-16.0-20190824-UNOFFICIAL-odin.zip), major changes since May:
All sensors works now (Thanks to @Chippa_a)
Manual network selection fixed
Telegram calls fixed (Need to confirm)
FM Radio fixed
Small gps improvement
Performance improvement
Updated kernel (fixed bug with rebooting instead of shutting down and some other bugs), also we now use binder and lmk from AOSP 3.18 kernel
SELinux denials resolved at 90%
Magisk issue fixed
Android 9.0.0_r46 (August security patches)
Addonsu is already included, you can enable root access in the developer settings
Click to expand...
Click to collapse
Thank you for the update! I dirty-flashed it over the 0803 build. You see, I run the stable Magisk v19.3, which, along with some modules, then allowed me to pass both Safetynet tests. Not anymore. As you stated that Selinux was almost ready, I had uninstalled ibuprophen's The SELinux Switch app prior to flashing the new build. I was using it in order to set Selinux to enforcing. As Selinux is still off in the new build, I tried to install the app back, but the new build doesn't allow me to do it. Even the zip, although correctly installed in recovery, after booted up, no SELinux Swich app is in the drawer, because directory /data/app/com.ibuprophen.selinux-1 has been deleted during the boot up process! What's happening?
EDIT: I decided to do a clean install. Everything is back to normal! Thanks, anyway!
Pixel Launcher
Thanks again for your hard work in bringing Android 9 to this very old, but still powerful, device of ours.
Well, I prefer Pixel Launcher over the embedded home app, but it keeps crashing all the time upon being selected as the default home app. For those who also plan to use Pixel Launcher, edit /data/system/packages.xml, and add up the following entries, under <package name="com.google.android.apps.nexuslauncher"> and <perms>:
Code:
<item name="android.permission.STATUS_BAR" granted="true" flags="0" />
<item name="android.permission.MANAGE_ACTIVITY_STACKS" granted="true" flags="0" />
Could you make such changes in your next build?
After flashing the 0824 build, i experienced much better scrolling experience, performance improved a lot.
Also Twrp works now and turn off function work properly, no need to reboot and press volume down go to stock recovery just to turn this off. So thank you for continue working on this
Sent from my Sony Xperia ZL using XDA Labs
I thank you for continuing to develop! I'll install that, i report issues!
Perfect, bug-free, fast and stable ROM, using with magisk, everything runs perfectly.
New build uploaded (lineage-16.0-20191019-UNOFFICIAL-odin.zip), major changes since August:
Fast battery drain fixed (for 15.1 nightlies too)
SELinux denials resolved at 99% (You can make builds in enforced SELinux, but I would recommend continuing to build them in permissive). Current build in permissive SELinux.
Oktober security patches
Minor performance and stability improvements (for 15.1 nightlies too)
Added missing props for gps and Miracast.
Build status - Stable.
Addonsu is already included, you can enable root access in the developer settings
This is where my support for android 8-9 for Z/ZL/ZR/Tablet Z ends, this build will be the last. All the changes made in the sources are already available on github.com/LineageOS, if someone wants to continue supporting and get the official LineageOS 16.0 - write to PM, I will explain in detail what remains to be done in the sources. Also, if someone wants to try to build other roms for our devices based on android 8-9 from the available sources - try to choose CAF-based roms (for example, AOKP, LineageOS, Ressurection Remix, AICP, etc.), then with 95% chance you will build and run the rom. Our sources are based on CAF, and for the build of roms based on AOSP, additional fixes are required, plus there will be problems with sound anyway.
I also want to note that I made a most part of the changes made in 16.0 to the official 15.1 nightlies, which should significantly improve their stability and performance
CyberWalkMaN said:
New build uploaded (lineage-16.0-20191019-UNOFFICIAL-odin.zip), major changes since August:
Fast battery drain fixed (for 15.1 nightlies too)
SELinux denials resolved at 99% (You can make builds in enforced SELinux, but I would recommend continuing to build them in permissive). Current build in permissive SELinux.
Oktober security patches
Minor performance and stability improvements (for 15.1 nightlies too)
Added missing props for gps and Miracast.
Build status - Stable.
Addonsu is already included, you can enable root access in the developer settings
This is where my support for android 8-9 for Z/ZL/ZR/Tablet Z ends, this build will be the last. All the changes made in the sources are already available on github.com/LineageOS, if someone wants to continue supporting and get the official LineageOS 16.0 - write to PM, I will explain in detail what remains to be done in the sources. Also, if someone wants to try to build other roms for our devices based on android 8-9 from the available sources - try to choose CAF-based roms (for example, AOKP, LineageOS, Ressurection Remix, AICP, etc.), then with 95% chance you will build and run the rom. Our sources are based on CAF, and for the build of roms based on AOSP, additional fixes are required, plus there will be problems with sound anyway.
I also want to note that I made a most part of the changes made in 16.0 to the official 15.1 nightlies, which should significantly improve their stability and performance
Click to expand...
Click to collapse
Thanks for your hardwork and making a stable build, but i encounter issue Installing it.
Clean Flash it including system, but result in Rebooting to twrp, tried to flash previous Build then Update, stuck to Boot Animation and Reboot to Twrp. I'm quite sure the file is not corrupted, downloaded it two times. Sadly it was the Final build but hoping you will address and fix it. Thanks
[Updated]
Hello!!
Kran007 said:
Thanks for your hardwork and making a stable build, but i encounter issue Installing it.
Clean Flash it including system, but result in Rebooting to twrp, tried to flash previous Build then Update, stuck to Boot Animation and Reboot to Twrp. I'm quite sure the file is not corrupted, downloaded it two times. Sadly it was the Final build but hoping you will address and fix it. Thanks
[Updated]
Click to expand...
Click to collapse
Could you try the rom? or you can't intall it anyway? I gonna try it in the xperia zl that i will give to my father, but i can't get some error, He gona kill me! Actually , his ZL is running august version.
Can someone make a Build with December Security Patch?
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Download
RECOVERY: Androidfilehost twrp-3.0.0-0-idol347-f2fs.img
ROM: Androidfilehost cm-12.1-20160209-UNOFFICIAL-idol347.zip
GAPPS: OpenGAPPS
Changelog
Code:
Current changelog: 2016-04-05
- Security Patchlevel April
- support 6039H
- small changes from upstream
Older changelogs:
Code:
2016-02-09
- Security Patchlevel February
- fixed some selinux denials
- removed obsolete script for variant identification
2016-01-31
- added support for 6039J (thanks @Faustop)
- lockscreen rotation toggle should now work as expected
- removed some unused services (thanks @Unjustified_Dev)
- added sepolicy (might cause some issues, please test)
2016-01-14
- fix inverted camera for those with samsung rear cam (confirmation needed)
- lockscreen rotation can be toggled now
- Security Patchlevel January
2016-12-09
- Now supports A, K,S and Y models (If you have another variant, please refer to [URL="http://forum.xda-developers.com/showpost.php?p=64000973&postcount=57"]this post[/URL])
- minor changes to camera
- Security Patchlevel December
2015-11-27
- Now supports A, K and Y models (If you have another variant, please refer to [URL="http://forum.xda-developers.com/showpost.php?p=64000973&postcount=57"]this post[/URL])
- LTE can now be chosen as preferred network
- added tethering options
- fixed writing to sd card
Detailed changelog:
https://github.com/pivoq/android_device_alcatel_idol347/compare/aa2b95e...pivoq:3df7e26
2015-11-18
- fixed regression which prevented access to bootloader
- added some missing camera blobs
- removed lots of unused stuff
- added some system.prop optimizations from upstream cm
2015-11-15
- added option to disable battery light
- added support for f2fs filesystem on /data and /cache (requires recovery that supports it, e.g [URL="https://www.androidfilehost.com/?fid=24269982086999020"]this one[/URL])
2015-11-09
- initial release
Click to expand...
Click to collapse
Thanks To/Credits
Code:
@Unjustified Dev
@petrov.0
@ashwin007
XDA:DevDB Information
CyanogenMod 12.1 for Alcatel ONETOUCH IDOL 3 4.7, ROM for the Alcatel Onetouch Idol 3
Contributors
pivoq, Unjustified Dev, petrov.0
Source Code: https://github.com/pivoq/android_device_alcatel_idol347
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-11-09
Last Updated 2016-04-06
Reserved
As requested, here's a thread for the 4.7" device. The build runs fine on my end without any major flaws (6039Y), however I expect rough edges on other device variants, especially those featuring dual sim functionality.
So please give feedback and provide logs if you find any bugs.
I really don't want this to be a one man show, so I encourage everyone willing to build/contribute to check out my github and get involved!
Oh! great
First release going to test this
Thanks @pivoq :good:
Can someone post a fleshable kernel for this rom. I'll try to mod it a little. Maybe it can overclock a bit, just to try smth new.
P.S CM rom is great, minor bugs, but it's nothing.
Nelle9900 said:
Can someone post a fleshable kernel for this rom. I'll try to mod it a little. Maybe it can overclock a bit, just to try smth new.
P.S CM rom is great, minor bugs, but it's nothing.
Click to expand...
Click to collapse
Could you please be more specific on what bugs you are talking about
too bad there is no stock camera
pivoq said:
Could you please be more specific on what bugs you are talking about
Click to expand...
Click to collapse
Sometimes terbuchet or what else, stopped working. I do factory reset today and i didn't see again that problem. Maybe it fixed the problem, consider that solved.
Personaly i do not like dbl tap on status bar to lock screen, but better that then nothing.
One thing i noticed when i place a call, that is seems to be to quiet sound. I can't sometimes clearly hear what is person talking to me. But not a big problem, it heppens sometimes.
Problem on instagram is solved with this rom. On 5.0.2 I have video problem on instagram, video do not play always.
My recommendation is kernel tweaks, maybe some minor overclocking to cpu and gpu, just for test, maybe that will speed up a lilttle bit this respectable device we have.
Best regard man and sorry for my bad english
And can someone post fleshable kernel of this rom? Thanks in advance.
Nelle9900 said:
Personaly i do not like dbl tap on status bar to lock screen, but better that then nothing.
Click to expand...
Click to collapse
You can disable it in settings
Nelle9900 said:
And can someone post fleshable kernel of this rom? Thanks in advance.
Click to expand...
Click to collapse
What do you mean exactly? You can flash the boot.img using fastboot. And the kernel source is on github.
thanks to make this for 4.7. system working faster than stock.
- nice audio equalizer but black player got better
- there is cm camera but missing some manual options like shutter speed - so i wait for change this
- double tap to on/off - there is trick to use gesture with nova launcher and app "screen off and lock" but when you are in lock screen tap working only around status bar
pivoq said:
You can disable it in settings
What do you mean exactly? You can flash the boot.img using fastboot. And the kernel source is on github.
Click to expand...
Click to collapse
I know that u can disable it, i didn't mean that, i love that option, but personaly didn't like to tap on status bar, it's better to tap on screen (midlle of screen). But it's okay man
Kernel - i don't know how to download fleshable kernel from github
I wont to mod the kernel, set a higher freq for cpu and gpu = overclock. If you know how to download and make a flashable kernel i will mod it.
First post was updated with latest build.
Current changelog: 2015-11-14
- added option to disable battery light
- added support for f2fs filesystem on /data and /cache (requires recovery that supports it, e.g this one)
Google service isn't working.
I can't login.
"Unfortunately, Google has stopped play services."
I tried opengapps pico, nano, stock, super.
Older versions work fine
Same problem here, opengapps crashing, i will try with an older version of gapps
edit: still fc, even with 04-04-2015 gapps 5.1.1 version :-s
logs or didn't happen
hope it helps
(I archived it, because it was over the 500kb limit requested from the forum..)
Scutariu said:
hope it helps
(I archived it, because it was over the 500kb limit requested from the forum..)
Click to expand...
Click to collapse
Thank you, apparently there went something wrong building chromium webview.
I will probably have a fresh build by tomorrow. In the meantime can you try if installing "Android System Webview" from play store fixes the issue?
pivoq said:
Thank you, apparently there went something wrong building chromium webview.
I will probably have a fresh build by tomorrow. In the meantime can you try if installing "Android System Webview" from play store fixes the issue?
Click to expand...
Click to collapse
I can't acces play store, when I try to add my google account, it crashes automatically
Scutariu said:
I can't acces play store, when I try to add my google account, it crashes automatically
Click to expand...
Click to collapse
https://www.apkmirror.com/apk/googl...ebview-47-0-2526-61-arm-android-apk-download/
The Unlegacy Android ProjectIntroduction
Unlegacy-Android started out as the OMAP4-AOSP Project. It was created in late 2015 in order to maintain a clean and organized place for pure AOSP support for various OMAP4 devices, such as the Galaxy Nexus and the Samsung Galaxy Tab 2 series. Over time this evolved to support more than just these devices, but still maintains its roots of supporting "legacy" devices that no longer receive "official" updates: hence Unlegacy Android was born. In our opinion, these ROMs are how the official updates would look.
On top of AOSP, we only include changes which are necessary to support the hardware, be secure, and get acceptable performance. Current features for hammerhead include:
BFQ IO scheduler (official kernel 3.4 release), set up so GUI processes have the highest priority
Volume button wakeup (setprop persist.wm.volume_wake_screen 1)
Last upstream (kernel/msm) hammerhead kernel tag merged
Charging LED control (setprop persist.sys.led_on_charger 0)
Enhanced backlight map for lower min brightness
Night display blue light filter (GLES-based)
KCAL & PCC color temperature interfaces
Other security patches & minor bug fixes
F2FS support from K4.4 backports
SELinux in Enforcing mode
Installation
It's important that /system needs to be unmounted before installing the ROM - some recoveries tend to leave it mounted after performing operations on it.
If you're planning to install GApps, be sure to read the second post.
Aside from these, installation and upgrading is no different than on other ROMs.
Problems
No known issues on Nougat builds
See post #3 for Oreo/Pie notes
If you notice anything, be sure to report it in this thread. Stability is our main concern. While it may takes some time, I usually read the thread and acknowledge the bug reports, even if I don't reply directly to them.
Downloads
See: http://builds.unlegacy-android.org. Our automated builds ensure that we always have the latest Android security patches merged in, without having to manually start and upload builds
Also, we'll have a built-in OTA updater (just like stock) soon (it's a work in progress).
Features?
There isn't much to say here - this is AOSP, if you install GApps, you pretty much get the same thing that's running on the Nexus devices (see second post). The aim of this project is to create a fast and stable ROM, as close to AOSP as possible without diminishing usability. Occasionally, small non-AOSP features may be implemented, provided there is a clear need and they make sense on hammerhead.
XDA:DevDB Information
Unlegacy Android Project, ROM for the Google Nexus 5
Contributors
amaces, Ziyan
Source Code: https://github.com/Unlegacy-Android
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.1.2
Stable Release Date: 2017-04-18
Current Beta Version: 9.0.0
Beta Release Date: 2017-10-02
Created 2017-04-21
Last Updated 2018-10-30
GApps
If you want to install GApps, we recommend micro packages on N builds (e.g., Open GApps), and pico otherwise.
An important note: as this is a pure AOSP ROM, installing GApps tends to be problematic: in order to try to avoid installation issues, be sure to install GApps immediately after installing the ROM, before booting the system for the first time. If you experience any issues with the Google applications, be sure to go into Settings -> Apps, and grant every permission to every Google application - most importantly, Google Play services.
In the case of an upgrade, be sure to re-install the GApps package, as upgrading wipes /system. You shouldn't need to re-set the permissions afterwards.
Stock-like setup
Disable the following built-in (AOSP) apps:
- Android keyboard (once you installed Gboard)
- Browser
- Calculator
- Camera
- Clock
- Email
- Gallery
Install the following apps from the Play store:
- Google Photos (https://play.google.com/store/apps/details?id=com.google.android.apps.photos)
- Calculator (https://play.google.com/store/apps/details?id=com.google.android.calculator)
- Chrome (https://play.google.com/store/apps/details?id=com.android.chrome)
- Clock (https://play.google.com/store/apps/details?id=com.google.android.deskclock)
- Gboard (https://play.google.com/store/apps/details?id=com.google.android.inputmethod.latin)
- Gmail (https://play.google.com/store/apps/details?id=com.google.android.gm)
- Google Calendar (https://play.google.com/store/apps/details?id=com.google.android.calendar)
- Google Camera (https://play.google.com/store/apps/details?id=com.google.android.GoogleCamera)
- Google Now Launcher (https://play.google.com/store/apps/details?id=com.google.android.launcher)
Rooting
You can flash the latest SuperUser (phh's open source fork), Chainfire's SuperSU, or Magisk to get rooted.
Oreo/Pie Status & CAF Notes
Oreo 8.1 builds are almost bug-free at this point, but still tagged as experimental. While last issues are sorted out, I will trigger manual builds, also published at https://builds.unlegacy-android.org/aosp-8.1/hammerhead.
To my knowledge, these are the remaining issues:
Bluetooth HFP speaker (mono/SCO) output is garbled. This seems related to a more general issue with audio effect/ACDB blobs.
Once all visible issues are fixed, and stability is comparable to Nougat builds, I'll switch on official builds on our Jenkins server.
Pie 9.0 builds are also becoming fully usable. Current builds have the same one remaining HFP bug described above.
Beyond "official" experimental builds, I post personal builds (including CAF experiments) in the hammerhead folder here.
Regarding sources for the WIP CAF kernel-based builds, see https://github.com/airend/android_kernel_lge_hammerhead/commits/tmp/caf+113+common. Corresponding device tree is still in rough shape and not uploaded yet, but assuming everything goes well, it'll replace current device tree when it's ready.
I've used the 05/04 build for 2 days a few weeks ago and it was a great rom.
The only issue I came across back then was that it has the green flickering when recording videos.
It's nice that the project has a XDA thread now and I gonna test this rom asap.
Thanks for keeping our good old Nexus 5 up to date.
Nexive said:
The only issue I came across back then was that it has the green flickering when recording videos.
Click to expand...
Click to collapse
Should be fixed on current builds (both green bar, and Google Camera flickering).
have a volume wake option?
Does it have issues with network location (Battery saver location)?
Some AOSP-based ROMs have this issue, so many apps (Chronus, Google Fit, f.lux, Instagram) can't get location.
alessio89g said:
Does it have issues with network location (Battery saver location)?
Some AOSP-based ROMs have this issue, so many apps (Chronus, Google Fit, f.lux, Instagram) can't get location.
Click to expand...
Click to collapse
No, all UA ROMs have this issue fixed
Ziyan said:
No, all UA ROMs have this issue fixed
Click to expand...
Click to collapse
Great, I think I'll try this ROM tomorrow!
--- --- ---
EDIT:
Is there any kind of changelog?
--- --- ---
RE-EDIT:
Okay, I found this:
https://gerrit.unlegacy-android.org
Hi....
Any screen shot?
keretapanau said:
Any screen shot?
Click to expand...
Click to collapse
Umm… it's barebones AOSP?
Buttery smooth,everything seems to be working fine here..Awesome jobs dev..keep it up.Finally this is the rom i been waiting for.:good:
CreateYourDream said:
have a volume wake option?
Click to expand...
Click to collapse
It is not an AOSP feature. It is something custom roms introduced.
Android-Andi said:
It is not an AOSP feature. It is something custom roms introduced.
Click to expand...
Click to collapse
thanks for answer, but i have broken power button :crying:
Cant Install Gapps
I've flashed it for about half a day, and it's very promising, it seems a great ROM!
I've noticed only three defects:
- The blue light filter (Night mode) is missing;
- With stock kernel, SuperSU will be in system mode;
- The Clock app crashes if you try to add another Time zone in the main screen.
Everything else works fine.
CreateYourDream said:
thanks for answer, but i have broken power button :crying:
Click to expand...
Click to collapse
Did you try this
Check out "Custom Navigation Bar"
https://play.google.com/store/apps/details?id=xyz.paphonb.systemuituner
Thanks for the ROM guys!
When I flash Open Gapps this message appears:
"This Gapps pkg is for Android 7.1.x ONLY
Please download the correct version for you ROM: 5.1.1 (SDK 22)"
I've flashed build ua_hammerhead-7.1.2-20170423031839 before gapps
Is there any alternative app for kcal..?KCAL app seems to be force closing once installed.
substratum support please
Code:
/*
* Your probably long dead warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 7 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
This thread is organized into different posts so that people dont quote the whole OP.
Please read all the posts and updates, before flashing.
Changelog Summary:
For full changelog follow the link.
#FINAL: 28 Jan 2018
Repo synced with latest LineageOS 14.1 sources.
Updated system webview to 64.
Added postinstallzip due to kernel not being flashed.
Added Magsik 15.3 support in ramdisk.
#4: 14 Nov 2017
New feature: UA:CMA
Added back Device Settings.
#3: 14 Nov 2017
Switched to a more stable kernel with improvments
Fixed Camera
Fixed Bootanimation
#2: 12 Nov 2017
Enabled OpenGLES 2.0
Fixed Audio/Video Playback.
Fixed Webview.
#1: 11 Nov 2017
Initial build.
Latest Download:
You need to flash lineage-14-postinstall.zip after installing the ROM, or else it wont boot.
For some reason ramdisks arent being flashed.. and I cant be bothered to figure out why..
lineage-14.1-20180127-UNOFFICIAL-galaxysmtd.zip
lineage-14-postinstall.zip
Older builds
#4 lineage-14.1-20171117_140654-UNOFFICIAL-galaxysmtd.zip
#3: lineage-14.1-20171114_062105-UNOFFICIAL-galaxysmtd.zip
#2: lineage-14.1-20171112_085706-UNOFFICIAL-galaxysmtd.zip
#1: lineage-14.1-20171111_094959-UNOFFICIAL-galaxysmtd.zip
XDA:DevDB Information
GalaxyS1 Resurrected Nougat Project, ROM for the Samsung Galaxy S I9000
Contributors
(°_o), ColdwindOfnowhere, xc-racer99
ROM OS Version: 7.x Nougat
Based On: LineageOS
Version Information
Status: Beta
Created 2017-11-11
Last Updated 2017-11-14
XDA:DevDB Information
GalaxyS1 Resurrected Nougat Project, ROM for the Samsung Galaxy S I9000
Contributors
(°_o), ColdwindOfnowhere, xc-racer99
ROM OS Version: 7.x Nougat
Based On: LineageOS
Version Information
Status: No Longer Updated
Created 2017-11-11
Last Updated 2018-01-28
Working List:
Boots
RIL (SMS, Call)
WiFi
Audio/Video Playback (fixed in build#2)
Camera Pictures (fixed in build#3)
Not Working List:
RIL Data
FAQ:
Dont install too many apps obviously
The first boot should be faster than previous nougat roms.. Since I have now used pre-odexed /system.
Known Issues:
Lagginess ofc, due to our device being old
Sometimes SystemUI gets killed due to low memory and we get Black Screen of Death
Install Instructions :
[WARNING]:
You must be already on at least Lollipop/Marshmallow ROM and have latest TWRP 3.1.1.
You must format /data as f2fs in TWRP.
Bootanimation is working since build #3.
You should already been familiar with flashing custom ROMs before.
And know how togo from gingerbread -> nougat.
Please check other threads for that..
If someone wants to contribute install instructions for this ROM.
I will be happy to add here and give credits.
Gapps
I havent tested GAPPS.. but I can guess the performance will be horrible with it.
However, I have included the patch for microG GmsCore signature spoofing. So you could try that.
Additional Info:
Built from latest LineageOS 14.1 Sources.
Latest kernel from @xc-racer99 aosp-7.1 branch
Live wallpapers, LineageOS Updater, Weather Service removed for low memory footprint.
Reserved.811919
Reserved.224232
Credits:
@xc-racer99 and @Coldwindofnowhere for getting the device upto android 7.1.1
And all others who had worked from beginning till now on this device.
Sources
Galaxy S1 Resurrected: Project Nougat
Device Trees:
https://github.com/galaxys1-resurrected/
https://github.com/galaxys1-nougat
Kernel:
https://github.com/galaxys1-resurrected/android_kernel_samsung_aries
I'm delighted that there's still someone who is working on this device. I'll be appreciated to wait for a more stable version of nougat.
The rom is indeed quite stable.
However, Webview doesn't seem to work. I think you should take a look here.
Also, built-in root with the Su-addon doesn't work.
And flashing a Magisk or SuperSu zip (made by @xc-racer99 ) resulted in a bootloop, but I was able to access the recovey.
MYEUHD said:
The rom is indeed quite stable.
However, Webview doesn't seem to work. I think you should take a look here.
Also, built-in root with the Su-addon doesn't work.
And flashing a Magisk or SuperSu zip (made by @xc-racer99 ) resulted in a bootloop, but I was able to access the recovey.
Click to expand...
Click to collapse
Expect lot of stuffs dont work at the moment.. listed in Not working.
About webview I will try to replace it.
Magisk and SuperSu try to patch boot.img and ramdisk.. and our device uses a very hacky way to load ramdisks.
I will create a patched ramdisk with latest Magisk then..
This has to be the fastest Nougat ROM I've flashed on this phone! Thanks for keeping this amazing phone alive. Can't wait to see it become more stable in the future
Full changelog: build #2
Fixed Audio/Video playback
I had to remove ffmpeg codecs as they were causing hardware decoding to not work.
Hardware decoding is working fine and 720p playback is smooth too..
I've tested without bigmem mode.. I havent implemented bigmem libs for 720p playback.
So please try without bigmem before reporting issues with it.
Fixed Webview
AOSP Webview was somehow not working on our device.. as pointed out by @MYEUHD
The solution he linked was to revert to older webview.
But that is outdated and unsafe so I tried with latest Android System Webview.
It seemed to work so I set it to default.
I havent tried but we can also use Chrome as our Webview..
Switched to OpenGL 2.0
We were stilling using OpenGL 1.4 for rendering.. this shouldnt affect much.. but animations should be smoother
Since we no longer get Shader errors with OpenGL 2.0
Let me know if you find any difference performance wise compared to build #1.
Downloads are in OP.
Status Update:
Project discontinued.
Status Update:
You can skip this paragraph if are not intrested in my long story cut short.
So I have been trying to fix stuffs which means.. rebuilding and flashing the ROM.
Wiping data .. getting logs.. testing if something works.. Repeat
I hadnt really used my Galaxy S1 phone.. It was just lying around a corner of my table getting dust.
Until one day I thought, let's build Oreo for this old time phone.. turns out the battery was RIP due
to not charging it for so long.. so I got a replacment battery then booted to see cm-14.1 build by
Coldwindofnowhere and missing IMEI which I sucessfully restored after creating a thread here.
Again thanks for that to @xc-racer99 and @MYEUHD
So I started out device trees and repos based on Coldwindofnowhere and xc-racer99
and made it compatabile with Oreo. And thanks to rInanD0 I was able to pick stuffs necessary on
kernel side.
Then me and @xc-racer99 discussed some stuff and I picked changes from Unlegacy-Android gerrit to properly do some stuff.. I fixed lots of stuffs.. but I couldnt get the display to initialize... so I decided
to wait for Unlegacy-Android for their take on Galaxy Nexus which shares same GPU as us to bring up Oreo first.
In the mean time, I thought again.. why not build Nougat for now.. so I again setup device tree and repos for
nougat. and we are here..
Okay so I havent really used my Galaxy S1 let alone this ROM.
This ROM does seem fast while moving around just after a first boot.
And really I hadnt installed or used any apps besides the one that came with LineageOS.
But today while trying to fix Camera, I had to actually take photos. Oh, and the reason camera was not working
was due to I had disabled building of Camera HAL in Oreo which stuck around... big derp
So camera preview was working now.. Snap camera wasnt savinf photos at first..
so I thought to install Open Camera.. I installed F-Droid.. then Open Camera..
Then I clicked some photos which seemed to be saved.
There were a lot of photos created so I decided to delete them.
But Files app wasnt deleting them.. must be a permission issue?
So i installed a file manager from F-Droid and deleted the photos.
Good enough.. then I thought I need to download these apps again after a data wipe..
Lets backup them.. so I installed an apk backup again from F-Droid.
While it was downloading.. BAM Screen went all BLACK.
I tried clicking home button but nothing.. then I clicked power button nothing.
Then I hold power button.. i got the options...
Now I was reminded of this bug which has been around since Lollipop? or Marshmallow days..
Screen going all black.. back then Coldwindofnowhere predicted it might due to out of memory issues..
And he is right.. I had adb running so I checked free memory and swap.. The swap file was and memory was nearly full.
I checked dmesg for logs... then I saw lowmemorykiller killing all kinds of stuff.. but there was only one time it killed this..
Code:
lowmemorykiller: Killing 'system:ui' (5642), adj 902,
And thats the reason for the black screen.. Now we all know this device doesnt have much memory.
So the option would be to not install many or any apps.. on this option..
Ofcourse I could try to get CMA working properly.. which adds just around 70-80mb I guess..
And we could just white list system ui to not get killed.. but then it would kill other important processes..
So I've decided to stop working on Nougat. I dont wanna give people false hope of *stable* nougat.
I will still upload a build with Camera fixed.. Well video recording still doesnt work.. Looking at logs.. i need to resurrect
the old way of video buffer. which got removed in Nougat.
And while Project Nougat is offically discontinued, Project Oreo is still alive just paused.
I will at least get Oreo bootanimation on this device.
Thanks for trying out this short lived nougat ROM.
Full changelog: build #3
Switched kernel from @Coldwindofnowhere to @xc-racer99
I think xc-racer99 kernel has better memory management. since the lowmemory killer doesnt kill many processes..
However I did make some changes to it.
Disabled CMA
Enabled and set zRAM to 1/4 of total memory
Some kernel build optimizations.
Note that.. this kernel doesnt have BigMem Support so wer'e stuck with 383MiB ram for now.
Fixed Bootanimation
Yeah.. that was a my mistake.. err..
At least you know its booting now.. but since we use pre-odexed ROM first boot shall be done in 5 minutes now..
Fixed Camera
Taking pictures should work now. Video recording is broken.. It needs to updated for Nougat..
Added Magisk in ramdisk
Latest version 14.0. Just install magisk manager AND DONT TRY TO PATCH BOOT.IMG..
We use very differnet system for boot.img and ramdisks..
I will try to update Magisk to latest version.
Fixed a big mistake in updater
https://github.com/galaxys1-nougat/...mmit/a6f51178503a01f6b1e7b0c8222e875392af8a8e
Flashing boot.img would actually result in wiping it in some cases..
If you had troubles installing this ROM or any ROMs in the past.. this might be the case..
The flash over mm dont work for me i have an error 7 i try to reflash and now no twrp i need to restore via odin any help?
laharl_22 said:
The flash over mm dont work for me i have an error 7 i try to reflash and now no twrp i need to restore via odin any help?
Click to expand...
Click to collapse
Error 7 is assert error... which I guess is coming from updater script..
You dont need to restore whole stock ROM..
I have built a twrp only recovery image... so you can just straight boot to recovery after Odin..
You can also flash recovery.img from heimdall .
https://drive.google.com/drive/folders/1KthyR6QWPswaIT8fw2nbiR4fathP-QU0?usp=sharing
How is this Rom compared to the LineageOS 4.4.4?
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.x (Nougat),
which is designed to increase performance and reliability over stock Android for your device.
All the source code for LineageOS is available in the LineageOS GitHub repo.
And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Official LineageOS website : http://lineageos.org
Downloads Links
LineageOS 15.x (Unlocked Bootloader) :
Nightlies : https://download.lineageos.org/odin
Google Applications (optional) :
OpenGapps : http://opengapps.org/ (Use packages for ARM, Android 8.1, Nano or Pico)
Information : Flash the GApps before the first boot. If not, a clean flash is recommended.
Flashing and updating
LineageOS clean install :
- (Optional) Flash the boot.img kernel from the ROM zip with Fastboot or Flashtool
- (Optional) Wipe the data & cache (Backup to make sure not to loose data)
- Flash the LineageOS ROM zip from the Recovery
- (Optional) Flash the GApps to have the Google Applications
- (Optional) Every additional zip you want to flash
- Reboot
LineageOS update / upgrade :
- (Information) Don't wipe anything unless you want to
- (CM / UNOFFICIAL) Nothing to wipe when switching
- (FUTURE RELEASES) Might need clean, informations will be updated
- Flash the latest LineageOS ROM zip from the Recovery
- (Optional) Flash the GApps on first install / upgrade. Not required later, but do update sometimes
- (Optional) Every additional zip you want to flash
- Reboot
LineageOS addonsu for root access :
- (Information) Read the Root section of the Q&A thread
- (Download) Download the addonsu for arm : LineageOS Downloads / Extras
- (Optional) Flash the zip on a working Lineage installation (once)
- (Information) Upon ROM updates, the addonsu is preserved
- Reboot
Issues and reports
- Report issues only if you are using the ROM kernel
- If an additional mod is installed, make sure it's unrelated, and mention it
- Make sure the issue wasn't discussed earlier in the threads
- Share a log of the error with CatLog for example
About LineageOS Legal : http://lineageos.org/legal/
The LineageOS team would like to thank everyone involved
in helping with testing, coding, debugging & documenting! Enjoy!
Also thanks to :
- The LineageOS Team
- The CyanogenMod Team
- Everyone involved in working and testing
XDA:DevDB Information
[ROM][NIGHTLIES][8.1.0] LineageOS 15.1 for Xperia ZL, ROM for the Sony Xperia ZL
Contributors
Daedroza, Chippa_a, CyberWalkMaN, AdrianDC
Source Code: https://github.com/fusion3-common
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2017-12-19
Last Updated 2018-12-22
Reserved
FEATURES AND ISSUES
Code:
- Boot : Ok
- GApps : OpenGApps Micro Ok
- FOTA Recovery : Ok (see below)
- WiFi : Ok (real SONY MAC address)
- Bluetooth : Ok (real SONY MAC address)
- WiFi Hotspot : Ok (2.4GHz and 5GHz)
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Work in Progress
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- AOSP sensors : Ok
- FM Radio : Ok
- Vibrator : Ok
- Microphone : Ok
- Audio & external audio : Ok
- Bluetooth audio : Ok
- NFC : Ok
- Kernel : Ok, Updating frequently
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Work in progress
- SEPolicies : Work in progress
Awesome thanks a lot for the newest version. I tried it for about an hour.
I flashed supersu 2.82 instead of rootsu.
Everything seemed smooth. Had to go back to v14 because the recovery of my apps with titanium didn't work.
Also copying files from internal storage to external didn't work.
Gesendet von meinem Xperia ZL mit Tapatalk
Tap2wake and root not work
Everything is smooth,thanks for your hard work!! :good:
---------- Post added at 12:40 PM ---------- Previous post was at 12:21 PM ----------
I flashed Magisk 14.0 and now my device is rooted!!
But Tap2wake still not work
[email protected] said:
Tap2wake and root not work
Everything is smooth,thanks for your hard work!! :good:
---------- Post added at 12:40 PM ---------- Previous post was at 12:21 PM ----------
I flashed Magisk 14.0 and now my device is rooted!!
But Tap2wake still not work
Click to expand...
Click to collapse
No idea, I need a log (dmesg / logcat) when you perform tap to wake.
Also,
Updated build.
Newer sources, fixes most of the application crashes (specifically Files android app).
Nothing special at the moment to test (other than rotation sensors and GPS). Please give it a try.
Daedroza said:
No idea, I need a log (dmesg / logcat) when you perform tap to wake.
Also,
Updated build.
Newer sources, fixes most of the application crashes (specifically Files android app).
Nothing special at the moment to test (other than rotation sensors and GPS). Please give it a try.
Click to expand...
Click to collapse
Tap2wake works fine in the latest build
SIM card can be recognized now!
Thanks a lot!!
Works perfectly with today's build. Root worked for me only with magisk. No problem until now. Testing it since 2 hours.
Thanks!!!
Gesendet von meinem Xperia ZL mit Tapatalk
Daedroza said:
FEATURES AND ISSUES
Code:
- Boot : Ok
- GApps : OpenGApps Micro Ok
- FOTA Recovery : Ok (see below)
- WiFi : Ok (real SONY MAC address)
- Bluetooth : Ok (real SONY MAC address)
- WiFi Hotspot : Ok (2.4GHz and 5GHz)
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Work in Progress
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- AOSP sensors : Ok
- FM Radio : Ok
- Vibrator : Ok
- Microphone : Ok
- Audio & external audio : Ok
- Bluetooth audio : Ok
- NFC : Ok
- Kernel : Ok, Updating frequently
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Work in progress
- SEPolicies : Work in progress
Click to expand...
Click to collapse
Thank's for updating our ZL. It's amazing...
But connecting to hidden WiFi SSID is not possible. If I show my SSID everything is fine. Responding Google many Oreo user on Nexus Devices had the same Problem. May can you fix it?
Gesendet von meinem Xperia ZL mit Tapatalk
@Daedroza thanks a lot man.
Really means a lot when their is still development for this device
Daedroza said:
No idea, I need a log (dmesg / logcat) when you perform tap to wake.
Also,
Updated build.
Newer sources, fixes most of the application crashes (specifically Files android app).
Nothing special at the moment to test (other than rotation sensors and GPS). Please give it a try.
Click to expand...
Click to collapse
Are you still developing?
If we get 8.1 working I could get some roms for the device
rituj26 said:
Are you still developing?
If we get 8.1 working I could get some roms for the device
Click to expand...
Click to collapse
Yes, we are. :angel:
8.1 should be working if you try building with fusion3-common sources.
At the moment, all Lineage sources for 8.1 are on staging / development branch, hence I haven't touched them.
I will use 8.1 sources once they are easier to work upon.
web.a said:
Thank's for updating our ZL. It's amazing...
But connecting to hidden WiFi SSID is not possible. If I show my SSID everything is fine. Responding Google many Oreo user on Nexus Devices had the same Problem. May can you fix it?
Gesendet von meinem Xperia ZL mit Tapatalk
Click to expand...
Click to collapse
Sorry, no development on this. There is a similar issue that occurred on 14.1 by one user and has reported the BUG.
But I don't have any viable solution to this, maybe in future 8.x releases, Google would fix it.
Thanks.
Uploaded a new build (20171231_184033). Fixed governor change on boot, now it correctly sets to Interactive instead of Performance.
There should be a noticeable improvement in battery life.
NOTE: We've switched on boot and system dex-preopt, so, "Wipe Dalvik + Cache" is necessary step. Still, if the device doesn't boot, please do a clean flash.
EDIT: Also, please look "Ambient Display Gestures" (located under System > Languages & Input > Ambient Display Gestures).
They contain wake device on Hand wave / Pick-up / Pocket feature.
Thank you and Happy New Year 2018 all!
Battery life improved a lot in this new build.
Perfect [emoji108].
Gesendet von meinem Xperia ZL mit Tapatalk
button settings not available
The button settings are not available, when i search fo torch in settings the settings appear but with selection of it the message "LineageOS Settings has stopped" appears.
I want to activate "long press for torch" !
(1) when watching YouTube, the picture is leggy sometimes.
(2) when sharing objects to another apps it will crash
That's what I found, but can be daily used
Thanks!
Updated to Lineage 15.1 / Android 8.1.0 sources.
Please note: Lineage specific additions are not ready as of yet. So use them with a pinch of salt.
Z thread contains a small change-log, if anyone is interested.
Thanks!
Xperia zl oreo button
Thanks so much for Android 8!
The camera can not write to extern SD.
The button settings (powerbutton long torch) not available in 15.1 too.
Thank you!!
First of all thank you and sorry if i commit some errors, cuz english is not my primary language!!. Been using your roms (RR since android M) to keep my zl up to date for a long time!
I installed this last release by TWRP 3.2.1!! Been using since 18/01/07 and very satisfied with it! I wiped Sistem, cache and dalvik and i got no errors about camera writing to sd card. Missing advanced options to restart/reboot but can live without this. Installed root via SuperSu 2.8 and its working fine until now.
Sometimes my mobile network data stops working but it comes back if I turn it off and turn on again...maybe its a problem im my carryer..
Another thing is about the status bar theme.. When i made the flash the status bar theme was black or grey... and changed to white today after a reboot...
To an Alpha release its very Stable and i would like to thank you again for this!!
With LOS 15.1 I have the issue with the wifi drop again. I always had the Problem with LOS 14 and any other Android 7.x Rom.
With LOS 15 it seemed the issue is gone but now with LOS 15.1 it is back. Anyone else noticed this Problem? I use the kodi remote APP frequently, so this issue is a pain in the ass.
Need a logfile?
Gesendet von meinem Xperia ZL mit Tapatalk
BeatB said:
With LOS 15.1 I have the issue with the wifi drop again. I always had the Problem with LOS 14 and any other Android 7.x Rom.
With LOS 15 it seemed the issue is gone but now with LOS 15.1 it is back. Anyone else noticed this Problem? I use the kodi remote APP frequently, so this issue is a pain in the ass.
Need a logfile?
Gesendet von meinem Xperia ZL mit Tapatalk
Click to expand...
Click to collapse
No such issue over here
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Display > lockscreen > advanced settings (this wont to do anything)
- Instagram video recording (You will sound like a robot)
- Wi-Fi display reboots the phone
- Green pictures when using the stock camera/ Whatsapp in lowlight (this is related to YUV processing). Use provided gcam instead.
- Report unknown bugs with logs please!
Instructions :
Clean flash:
- Flash latest Pie ROM by Xiaomi (10.0.13.0). You may use option to retain userdata.
- Use fastboot to boot to latest TWRP.
- Falsh the TWRP installer zip and Force-encryption-disabler zip
- Reboot to TWRP
- Flash the ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Dirty flash (upgrade from existing AOSiP 9 install):
- Reboot to TWRP
- Factory reset in TWRP. No need to wipe userdata! (Skip if you are on ten already)
- Flash ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Note: It is strongly advised to make a backup before upgrading!
Downloads :
Download from Sourceforge
Open GApps Note: OpenGAPPS for ten now officially out, so link changed. Nano package is still recommended!
Recommended Gcam
Kernel Source
Device Tree
Vendor Tree
Props to all the guys from daisy-development-q and especially Lyceris-chan!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
Lyceris-chan
Tunasahinn
acras01
pawelik001
Offain/33bca
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
gumka77 said:
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
Click to expand...
Click to collapse
I used the OpenGAPPS from test folder I linked in the OP. Bit... might work, but no guarantee. Just try them and report back, so maybe other users can learn from your experiences.
Note: Updated my main phone from AOSiP Pie to Ten and had some wierd issues. Factory resetted in TWRP and now everything working. So making a backup and factory reset before updating is recommended
When viperos q?
Thanks you , I see your sources is stable thanks for upgrade aosip
opal06 said:
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Device side should be fine, but please report all bugs here with logs!
Instructions :
Follow guide by davidrocher: https://github.com/tkchn/daisyinstall
This works for Android 10 too! Please use correct version of OpenGAPPS.
Note: It is strongly advised to make a backup before upgrading and performing a factory reset in TWRP.
Downloads :
Download from Sourceforge
Open GApps
Kernel Source
Device Tree
Props to all the guys from daisy-development-q and especially acras1!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Click to expand...
Click to collapse
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
See if this works for you:
View attachment Clock_v1.0.0.zip
Thanks for the rom, what base is needed?, is November security patch?
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
opal06, kudos for signature spoofing built-in, I can use microG.
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Thank you all very much for your positive feedback.
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
As for the missing clock, I did not notice it during testing, but you are obviously right. For a stock feeling you can download the Clock app by Google, but there are many other good alternatives.
AOSiP updater is not working because I did not update the OTA file. AOSiP ten is still beta from ROM source side, so I won't enable OTA until it's official from their side.
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
As base any pie base should work, but latest is best.
schmidt_here said:
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
Click to expand...
Click to collapse
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
gumka77 said:
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Click to expand...
Click to collapse
Probably, just try and report. If something goes wrong, go to TWRP and flash ROM again without wiping data. You won't loose any settings or data.
Plis build with nitrogen kernel
test
opal06 said:
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
Click to expand...
Click to collapse
Yes, it's enabled. It doesn't disturb me, maybe i've to make a fresh install and take another version base.
Yesterday i had an issue, i couldn't download from play store until i deactivated and reactivated the app. Also i couldn't install apk's downloaded manualy from website.
Maybe it's a unique incident
schmidt_here said:
Also i couldn't install apk's downloaded manualy from website.
Click to expand...
Click to collapse
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
celrau said:
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
Click to expand...
Click to collapse
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
lacia-chan said:
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
Click to expand...
Click to collapse
I just did some reading on this, you are right
Flashing Nitrogen R2 kernel results in bootloop with this rom. R1 works fine. Any fix?
good job
I'm using your rom for 1-2 days now Looks like every features work really well to me. I'l report back later if I see anything. Thanks OP