Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.x (Nougat),
which is designed to increase performance and reliability over stock Android for your device.
All the source code for LineageOS is available in the LineageOS GitHub repo.
And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Official LineageOS website : http://lineageos.org
Downloads Links
LineageOS 15.x (Unlocked Bootloader) :
Nightlies : https://download.lineageos.org/odin
Google Applications (optional) :
OpenGapps : http://opengapps.org/ (Use packages for ARM, Android 8.1, Nano or Pico)
Information : Flash the GApps before the first boot. If not, a clean flash is recommended.
Flashing and updating
LineageOS clean install :
- (Optional) Flash the boot.img kernel from the ROM zip with Fastboot or Flashtool
- (Optional) Wipe the data & cache (Backup to make sure not to loose data)
- Flash the LineageOS ROM zip from the Recovery
- (Optional) Flash the GApps to have the Google Applications
- (Optional) Every additional zip you want to flash
- Reboot
LineageOS update / upgrade :
- (Information) Don't wipe anything unless you want to
- (CM / UNOFFICIAL) Nothing to wipe when switching
- (FUTURE RELEASES) Might need clean, informations will be updated
- Flash the latest LineageOS ROM zip from the Recovery
- (Optional) Flash the GApps on first install / upgrade. Not required later, but do update sometimes
- (Optional) Every additional zip you want to flash
- Reboot
LineageOS addonsu for root access :
- (Information) Read the Root section of the Q&A thread
- (Download) Download the addonsu for arm : LineageOS Downloads / Extras
- (Optional) Flash the zip on a working Lineage installation (once)
- (Information) Upon ROM updates, the addonsu is preserved
- Reboot
Issues and reports
- Report issues only if you are using the ROM kernel
- If an additional mod is installed, make sure it's unrelated, and mention it
- Make sure the issue wasn't discussed earlier in the threads
- Share a log of the error with CatLog for example
About LineageOS Legal : http://lineageos.org/legal/
The LineageOS team would like to thank everyone involved
in helping with testing, coding, debugging & documenting! Enjoy!
Also thanks to :
- The LineageOS Team
- The CyanogenMod Team
- Everyone involved in working and testing
XDA:DevDB Information
[ROM][NIGHTLIES][8.1.0] LineageOS 15.1 for Xperia ZL, ROM for the Sony Xperia ZL
Contributors
Daedroza, Chippa_a, CyberWalkMaN, AdrianDC
Source Code: https://github.com/fusion3-common
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2017-12-19
Last Updated 2018-12-22
Reserved
FEATURES AND ISSUES
Code:
- Boot : Ok
- GApps : OpenGApps Micro Ok
- FOTA Recovery : Ok (see below)
- WiFi : Ok (real SONY MAC address)
- Bluetooth : Ok (real SONY MAC address)
- WiFi Hotspot : Ok (2.4GHz and 5GHz)
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Work in Progress
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- AOSP sensors : Ok
- FM Radio : Ok
- Vibrator : Ok
- Microphone : Ok
- Audio & external audio : Ok
- Bluetooth audio : Ok
- NFC : Ok
- Kernel : Ok, Updating frequently
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Work in progress
- SEPolicies : Work in progress
Awesome thanks a lot for the newest version. I tried it for about an hour.
I flashed supersu 2.82 instead of rootsu.
Everything seemed smooth. Had to go back to v14 because the recovery of my apps with titanium didn't work.
Also copying files from internal storage to external didn't work.
Gesendet von meinem Xperia ZL mit Tapatalk
Tap2wake and root not work
Everything is smooth,thanks for your hard work!! :good:
---------- Post added at 12:40 PM ---------- Previous post was at 12:21 PM ----------
I flashed Magisk 14.0 and now my device is rooted!!
But Tap2wake still not work
[email protected] said:
Tap2wake and root not work
Everything is smooth,thanks for your hard work!! :good:
---------- Post added at 12:40 PM ---------- Previous post was at 12:21 PM ----------
I flashed Magisk 14.0 and now my device is rooted!!
But Tap2wake still not work
Click to expand...
Click to collapse
No idea, I need a log (dmesg / logcat) when you perform tap to wake.
Also,
Updated build.
Newer sources, fixes most of the application crashes (specifically Files android app).
Nothing special at the moment to test (other than rotation sensors and GPS). Please give it a try.
Daedroza said:
No idea, I need a log (dmesg / logcat) when you perform tap to wake.
Also,
Updated build.
Newer sources, fixes most of the application crashes (specifically Files android app).
Nothing special at the moment to test (other than rotation sensors and GPS). Please give it a try.
Click to expand...
Click to collapse
Tap2wake works fine in the latest build
SIM card can be recognized now!
Thanks a lot!!
Works perfectly with today's build. Root worked for me only with magisk. No problem until now. Testing it since 2 hours.
Thanks!!!
Gesendet von meinem Xperia ZL mit Tapatalk
Daedroza said:
FEATURES AND ISSUES
Code:
- Boot : Ok
- GApps : OpenGApps Micro Ok
- FOTA Recovery : Ok (see below)
- WiFi : Ok (real SONY MAC address)
- Bluetooth : Ok (real SONY MAC address)
- WiFi Hotspot : Ok (2.4GHz and 5GHz)
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Work in Progress
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- AOSP sensors : Ok
- FM Radio : Ok
- Vibrator : Ok
- Microphone : Ok
- Audio & external audio : Ok
- Bluetooth audio : Ok
- NFC : Ok
- Kernel : Ok, Updating frequently
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Work in progress
- SEPolicies : Work in progress
Click to expand...
Click to collapse
Thank's for updating our ZL. It's amazing...
But connecting to hidden WiFi SSID is not possible. If I show my SSID everything is fine. Responding Google many Oreo user on Nexus Devices had the same Problem. May can you fix it?
Gesendet von meinem Xperia ZL mit Tapatalk
@Daedroza thanks a lot man.
Really means a lot when their is still development for this device
Daedroza said:
No idea, I need a log (dmesg / logcat) when you perform tap to wake.
Also,
Updated build.
Newer sources, fixes most of the application crashes (specifically Files android app).
Nothing special at the moment to test (other than rotation sensors and GPS). Please give it a try.
Click to expand...
Click to collapse
Are you still developing?
If we get 8.1 working I could get some roms for the device
rituj26 said:
Are you still developing?
If we get 8.1 working I could get some roms for the device
Click to expand...
Click to collapse
Yes, we are. :angel:
8.1 should be working if you try building with fusion3-common sources.
At the moment, all Lineage sources for 8.1 are on staging / development branch, hence I haven't touched them.
I will use 8.1 sources once they are easier to work upon.
web.a said:
Thank's for updating our ZL. It's amazing...
But connecting to hidden WiFi SSID is not possible. If I show my SSID everything is fine. Responding Google many Oreo user on Nexus Devices had the same Problem. May can you fix it?
Gesendet von meinem Xperia ZL mit Tapatalk
Click to expand...
Click to collapse
Sorry, no development on this. There is a similar issue that occurred on 14.1 by one user and has reported the BUG.
But I don't have any viable solution to this, maybe in future 8.x releases, Google would fix it.
Thanks.
Uploaded a new build (20171231_184033). Fixed governor change on boot, now it correctly sets to Interactive instead of Performance.
There should be a noticeable improvement in battery life.
NOTE: We've switched on boot and system dex-preopt, so, "Wipe Dalvik + Cache" is necessary step. Still, if the device doesn't boot, please do a clean flash.
EDIT: Also, please look "Ambient Display Gestures" (located under System > Languages & Input > Ambient Display Gestures).
They contain wake device on Hand wave / Pick-up / Pocket feature.
Thank you and Happy New Year 2018 all!
Battery life improved a lot in this new build.
Perfect [emoji108].
Gesendet von meinem Xperia ZL mit Tapatalk
button settings not available
The button settings are not available, when i search fo torch in settings the settings appear but with selection of it the message "LineageOS Settings has stopped" appears.
I want to activate "long press for torch" !
(1) when watching YouTube, the picture is leggy sometimes.
(2) when sharing objects to another apps it will crash
That's what I found, but can be daily used
Thanks!
Updated to Lineage 15.1 / Android 8.1.0 sources.
Please note: Lineage specific additions are not ready as of yet. So use them with a pinch of salt.
Z thread contains a small change-log, if anyone is interested.
Thanks!
Xperia zl oreo button
Thanks so much for Android 8!
The camera can not write to extern SD.
The button settings (powerbutton long torch) not available in 15.1 too.
Thank you!!
First of all thank you and sorry if i commit some errors, cuz english is not my primary language!!. Been using your roms (RR since android M) to keep my zl up to date for a long time!
I installed this last release by TWRP 3.2.1!! Been using since 18/01/07 and very satisfied with it! I wiped Sistem, cache and dalvik and i got no errors about camera writing to sd card. Missing advanced options to restart/reboot but can live without this. Installed root via SuperSu 2.8 and its working fine until now.
Sometimes my mobile network data stops working but it comes back if I turn it off and turn on again...maybe its a problem im my carryer..
Another thing is about the status bar theme.. When i made the flash the status bar theme was black or grey... and changed to white today after a reboot...
To an Alpha release its very Stable and i would like to thank you again for this!!
With LOS 15.1 I have the issue with the wifi drop again. I always had the Problem with LOS 14 and any other Android 7.x Rom.
With LOS 15 it seemed the issue is gone but now with LOS 15.1 it is back. Anyone else noticed this Problem? I use the kodi remote APP frequently, so this issue is a pain in the ass.
Need a logfile?
Gesendet von meinem Xperia ZL mit Tapatalk
BeatB said:
With LOS 15.1 I have the issue with the wifi drop again. I always had the Problem with LOS 14 and any other Android 7.x Rom.
With LOS 15 it seemed the issue is gone but now with LOS 15.1 it is back. Anyone else noticed this Problem? I use the kodi remote APP frequently, so this issue is a pain in the ass.
Need a logfile?
Gesendet von meinem Xperia ZL mit Tapatalk
Click to expand...
Click to collapse
No such issue over here
Related
CyanogenMod is discontinued.
This ROM is continued as a LineageOS ROM.
Check the G800F LineageOS ROM for more info.
This is a CyanogenMod 13.0 ROM for the Exynos3470 based Samsung Galaxy S5 mini (G800F/G800M/G800Y) by CTXz and hennymcc.
DO NOT USE IT FOR G800H OR YOU WILL BRICK YOUR DEVICE
Although G800F and G800H share the same name they are not related in terms of hardware due to the different SoCs used (Exynos vs. Snapdragon).
Hence please do not ask for support or ROMs for the G800H.
Working features
Internal Root
Brightness slider
Option to use soft keys
Additional settings (Buttons menu in settings)
HW accelerated GUI
Camera (pictures+video: Back+Front)
MTP storage
Flash Light
Bluetooth (A2DP, HFP, HID)
IR
Lock Screen
Sound
SMS
Initiate and receive calls
Wifi
Mobile Data
USB-OTG (Keyboard, Mouse, USB-Audio, Mass-Storage)
NFC
Hardware sensors (Orientation, Compass, Proximity, Acceleration, Hall sensor, Step counter)
Light sensor (needed for auto-brightness)
Pulse sensor (preliminary and very inaccurate. Works with Apps like Kardiograph)
SD-Card as internal storage (new Android M feature)
GPS
Multi-Window support (new experimental CM setting, can be enabled via developer settings)
Fingerprint scanner
Non-working features:
SELinux
Known issues:
See the Bug Report section of this thread
Disclaimer:
You flash this image at your own responsibility. I am not responsible for any damage that might be caused by flashing this image (bricked device, lost data, ...)
Flashing this kernel image will trigger the KNOX counter, so your warranty will be void.
Applications that use KNOX (e.g. "Private Mode") might not work anymore when returning to the stock ROM, as the device is regarded as compromised. Do not flash this ROM if you need those applications.
The image is only for Exynos3470 based S5 Mini variants SM-G800F/M/Y.
It might be instable, crash your device, drain your battery, or even might damage your smartphone (e.g. if an USB-OTG device drains too much power)
Some users reported that their touch-screen stopped working permanently after some weeks of usage. For some user's (two at the moment including me) NFC stopped working permanently. Probably this issues are not related to this ROM as also many stock user's complain about hardware issues (random reboots, black screens, unresponsive touchscreen) but you have been warned.
Backup your data before flashing and check if the original firmware is present (e.g. at SamMobile)
Click to expand...
Click to collapse
Before you start:
Backup your data, like call history, contacts, sms, WhatsApp messages, favourite app settings that are on internal and external sd (by using Titanium Backup or other apps available on PlayStore). At least all internal data will be lost in any case. If you have bad luck you might also loose data from your external sd card.
Download:
Odin3-v3.07 (it is contained in CF-Auto-Root)
TWRP 3.0.0 recovery image [25/03/2016] (AndroidFileHost Mirror)
The newest CM 13.0 releases as well as the latest TWRP can be found here:
https://aykevl.nl/android
-Credit and thanks to @ayke
CM 13.0 ROM for G800F/M/Y (Android File Host)
Google Apps (contains Google Play, ...) for Android 6.0, one of the following two is recommended:
Open GApps Project, Platform:ARM, Android:6.0, Variant: whatever you prefer (e.g. "mini" or "nano")
Install recovery:
Reboot your device into Odin mode: turn off your device, then press Volume-Down + Home + Power button at the same time and release them.
Confirm the following warning message with the Volume-Up button.
Connect your device to your PC via USB
Make sure the device driver's are installed on your PC
Start Odin
In Odin select PDA and select the recovery image (recovery.tar.md5)
Check that only "Auto Reboot" and "F. Reset Time" is set
Click on "Start": the kernel image should be flashed now and the device should reboot afterwards. By flashing the recovery, your warranty will be void.
After the recovery flashing process was successful, power of your device. If not restart into Download mode and flash again or flash the stock rom.
Before you flash:
You need the latest TWRP recovery (see above). Otherwise TWRP might not be able to flash the ROM. This is because TWRP checks now if the device is "supported".
Wipe the device to avoid problems with remaining files from the old installation (see instructions below). This also applies if you already installed an older version of CM 13.0.
Flash CyanogenMod:
Reboot into recovery mode (Press Volume-Up + Home + Power button)
If you come from a stock ROM, this is your opportunity to make a Backup of your phone(Backup, then select Boot, System, Data, then swipe to backup). Note that the recovery might fail to restore the backup when you want to go back to the stock ROM (for me it got stuck after a restore during boot. But the backup was made with a different version of TWRP, so it might work in general) - simply do not expect too much of it at the moment.
If you haven't copied the installation files yet, you can now copy the GApps and CyanogenMod zip to your internal sd or external sd (be careful not to put the files into the data directory of the internal sd card as this will be deleted in the next step). Be sure that MTP is enabled (inside Mounts, click on Enable MTP), then, from your pc, copy the files. If MTP does not work from recovery, try it directly from Android or remove the external sd card from the phone and put it into your PC.
Wipe Dalvik Cache, Cache, System and Data (inside Wipe -> Advanced Wipe). Do not report problems if you did not wipe those partitions as the problems are most probably related to this!
Install the CM 13.0 ROM zip-package
Install the GApps zip-package
How to root:
No SuperSu is needed as CyanogenMod already comes with integrated root support. Root access is disabled by default.
You normally do not need root access. If you want to activate root access for apps, do the following:
Open the Settings menu, select "About Phone"
Tap on the "Build number" entry seven times. You should be notified, that the developer settings are now active.
Open the Settings menu, select "Developer options". Enable root access by selecting "Apps" in the "Root-Access" setting.
In case you want to go back to the stock ROM:
lf you do not have the latest ROM for the G800F you can download it from SamMobile
Reboot your phone into Odin mode
Open Odin on your PC and connect your smartphone with your PC via USB
If you have a zip-file unzip it so that you have a .tar.md5 file
In Odin click on the PDA button and select the .tar.md5 file. Then press "Start".
Normally the stock rom fails to boot as the data from CM is still on the data partition. So after flashing the stock rom, reboot into recovery mode (it looks a bit different now). First wipe the data partition, then wipe the cache.
Reboot
Changelog
Code:
25/03/2016:
* USB OTG disabled by default for improved waterproofness (can be re-actived via Advanced Settings App)
* how to enable USB OTG:
* start the "Advanced Settings" App
* open the "USB-OTG Mode" setting
* select "Powered (Not waterproof)"
* add support for call recording
* how to record a call:
* start/Receive a call with the CM Dialer App
* During call open settings (icon: three vertical dots)
* Select "record call"
* (if you get an error message that recording failed, try to enable developer settings and enable root access for apps+adb)
* how to playback recorded call:
* open the call history in the Dialer app (icon: clock symbol)
* open details of recorded call
* in the detailed calling list, click on the play button for the recorded call
* removing fingerprints works now
* updated some stock libs with LP versions
* support for F2FS (needs new TWRP recovery)
* updated TWRP recovery (with F2FS support)
* synch with latest CM sources
22/02/2016:
* Fixed lock-screen freeze
* Fixed Infrared support
* Fixed search for mobile networks (search will take ~1min until results are shown)
* Updated some libs with LP versions
* Initial support for a fingerprint scanner
* Sync with CM sources
16/02/2016:
* Fixed camera problems with WhatsApp
* Fixed preferred radio family settings (LTE/GSM/...)
* Added default long-press actions for home and app-switch buttons (DJSteve)
* Switched to LP kernel (G800FXXU1BOL4)
* libsensors: replaced with open source implementation (fixes light sensor which is needed for auto-brightness)
* Preliminary (and very inaccurate) support for heart-rate sensor
* Update to TWRP 3.0 (TWRP 2.x will still work)
* Sync with CM sources
30/01/2016:
* Fixed BT calling problems (only noise)
* CM Camera replaced with CM Snap Camera
* better image quality (check picture quality settings), resulting in image file sizes of > 1MB instead of 200KB
* Saving images to SD card supported (check settings)
* Improved RIL support
* Use stock soft-key layout (left capacitive button is app-switch instead of menu now)
* Key-layout can be configured via button settings.
* Fixed adb root problem (root permissions were lost after reboot)
* SamsungServiceMode app works now
* Sync with CM sources
14/01/2016:
* Add soft keys option under settings > buttons
* Fix crash after hanging up call
* Sync with newest CM sources
31/12/2015:
* Receiving calls works now
* psyafter: SD-Card can be used as internal storage (new Android M feature).
Can be used to store photos on SD-Card.
IMPORTANT: the SD-Card will be formatted if you activate this feature.
* GPS works now
* Sensors work now (Orientation, Compass, Proximity, Acceleration, Hall sensor, Step counter).
Light and Pulse sensors do not work yet.
* Youtube/Screencast crash fixed
26/12/2015:
* Wifi and Mobile Data work
20/12/2015 Hennymcc :
* Audio Fix
- Audio is now working (Still a bit quiet though)
- Making Calls is now working
14/12/2015 Hennymcc, CTXz :
* 6.0.1
- Updated to Android 6.0.1
- Fixed reboot when locking phone
- Fixed Internal Root in developer options not working
30/10/2015 CTXz :
* Added 'Buttons' settings
- Integrated Buttons/Capacitive Keys menu into settings
- Double tapping or holding button to open camera now works (In CM12 it didn't work)
- Power Menu is added under buttons menu
- Minor fixes
-!- NOTE : Setup Wizard may have some issues/crashes with this build. I will exclude it in the next one
29/10/2015 CTXz :
* Synced to newest sources
- Ugly looking Google search box removed
28/10/2015 CTXz :
* Changed from eng to userdebug
- No more red frames flashing
- Fixed Browser crashing
- Fixed crash after first boot
- More user friendly
- No additional boot.img flashing required
28/10/2015 hennymcc:
* First CM 13.0 test-build
This section is for developers:
A README file with build instructions can be found here:
Code:
https://github.com/cm-3470/android_device_samsung_kminilte
Sources:
Code:
https://github.com/cm-3470/android_device_samsung_kminilte
https://github.com/cm-3470/android_vendor_samsung_kminilte
https://github.com/cm-3470/android_kernel_samsung_kminilte
https://github.com/cm-3470/android_device_samsung_smdk3470-common
Developers welcome
At the moment the G800F/M/Y specific port of this ROM is only done by two persons (CTXz and hennymcc). Although Unjustified Dev also works on this ROM he does not own an Galaxy S5 Mini but a Galaxy Light which has a similar base but is different when it comes to camera, nfc and other components (maybe even slightly when it comes to audio and radio).
Help from other developers is always welcome. See the bug/feature section and this thread to see what is missing. Just give some short info (here in this thread or PM) that you want to work on some issue or feature so that work can be synchronized. Maybe there are also other devs that want to work with you on the same issue.
Knowledge in how the kernel works and good programming skills in C, C++ and Java would be nice but not necessary for all problems. At least you should be able to build the ROM and test your changes yourself but you do not need experience in porting ROMs.
Thanks to CTXz for his awesome work on getting Marshmallow to the G800F
Thanks to spookcity138 and ayke for providing new builds of this ROM.
Thanks to Psyafter for some patches and working on the G800F.
Thanks to Unjustified Dev from Team Regular for the initial work to get the G800F ready with CM.
XDA:DevDB Information
[G800F/M/Y][ROM][6.0][MHC19J] CyanogenMod 13.0 for G800F/M/Y [Beta 25/03/2016] [eol], ROM for the Samsung Galaxy S5 Mini
Contributors
hennymcc, CTXz, spookcity138, psyafter, Unjustified Dev, ayke
Source Code: https://github.com/cm-3470
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP Recovery [version >= 15/08/2015]
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-10-28
Last Updated 2017-01-26
If you already flashed stock LP, you will get the following message on boot:
KERNEL/RECOVERY IS NOT SEANDROID ENFORCING
If you wait for some seconds (or press some buttons) the message text turns blue:
KERNEL/RECOVERY IS NOT SEANDROID ENFORCING
and after some seconds (or buttons presses) CM will start.
Reserved
You (both of you) are making a great job !
Envoyé de mon SM-G800F en utilisant Tapatalk
$wap said:
You (both of you) are making a great job !
Envoyé de mon SM-G800F en utilisant Tapatalk
Click to expand...
Click to collapse
Ditto!
Sent from my SM-G800F using XDA Premium HD app
I don't see the point in cm13 when we didn't even get official Lollipop required to make cm12 better, "legit". Can someone enlighten me...?
Is it supposed to have the same bugs as cm12 or will there be more of them? Is Marshmallow statistically faster than Lollipop on other phones?
hennymcc said:
This is just a test build.
At the moment you have to flash the following boot.img with Odin after installing CM 13:
https://www.androidfilehost.com/?fid=24052804347848059
CM 13 may reboot after the initial configuration and may not be able to start again. I wiped the data partition and started again. This time it worked without a reboot (I also choose English as language and did not configure Wifi).
Click to expand...
Click to collapse
Updated the link with the boot.img build in
---------- Post added at 07:37 AM ---------- Previous post was at 07:33 AM ----------
n3n00 said:
I don't see the point in cm13 when we didn't even get official Lollipop required to make cm12 better, "legit". Can someone enlighten me...?
Is it supposed to have the same bugs as cm12 or will there be more of them? Is Marshmallow statistically faster than Lollipop on other phones?
Click to expand...
Click to collapse
CM13 is for people that enjoy its minor speed boost, smoother animations, cool new features and less Android related bugs over Lollipop. If you want a, well... almost bugless experience (Cough cough touchwiz) then use the stock rom.
CTXz said:
Updated the link with the boot.img build in
---------- Post added at 07:37 AM ---------- Previous post was at 07:33 AM ----------
CM13 is for people that enjoy its speed and less internal bugs. If you want a, well... almost bugless experience (Cough cough touchwiz) then use the stock rom.
Click to expand...
Click to collapse
Hi, so you think it will be easier to make a CM13 version with less bugs than the unfinished CM12 (Yes / No) ?
I enjoy to use a rom for every day not just having the last version to amaze my friends...
Depends. What I know for sure is that bugs related to Lollipop will be fixed. However we are hoping to get it as stable as cm12 if not more
Screehots
Screenshots with phone frame
Screenshots within Android
What‘s the current status of the mobile-data-connection in this build? Is it working?
In the first build of CM12.1 is was not working.
My experience was that this feature was always a problem in the beginning-time of every CM-build. Even with the official CM-builds.
WarStars said:
What‘s the current status of the mobile-data-connection in this build? Is it working?
In the first build of CM12.1 is was not working.
My experience was that this feature was always a problem in the beginning-time of every CM-build. Even with the official CM-builds.
Click to expand...
Click to collapse
We didn't build the correct RIL yet but it should be working in hopefully only few builds
New update
Download link has been updated
Changed from eng to userdebug
- No more red frames flashing
- Fixed Browser crashing
- Fixed crash after first boot
- More user friendly
- No additional boot.img flashing required
Also for anyone asking if there are really some differences in Marshmallow compared to Lollipop. Yes, the animations are allot smoother. There are some new native features. It has cleaned the mess of Lollipop's Android related bugs and is what Lollipop should have been from begin on. It is snappier than Lollipop and I can see/feel that. You may have realized that gingerbread-ish google toolbar. This is CM13 related since the official CyanogenMod 13 source is still in beta. However we no longer have the problem that the toolbar is laggy, instead it has a smooth animation when selecting it.
Could you please give some information when the RIL is done? Thank you in advance.
WarStars said:
Could you please give some information when the RIL is done? Thank you in advance.
Click to expand...
Click to collapse
It's on our priority list so hopefully soon
You know I have both the G800H and the G800F (the camera bug on the G800H prompted me to get the G800F), and now I don't know which one I should get rid of... I know, I know: "hard problem there KC... ya bloody wanker"
CTXz said:
It's on our priority list so hopefully soon
Click to expand...
Click to collapse
Awesome job so far, guys!
Sent from my SM-G800F using XDA Premium HD app
New update
Download link has been updated
Synced to the newest CM13 sources
- Ugly looking Google search box removed
CTXz said:
New update
Download link has been updated
Synced to the newest CM13 sources
- Ugly looking Google search box removed
Click to expand...
Click to collapse
Working features from page 1 still the same for this new build?
Sent from my SM-G800F using XDA Premium HD app
Mobile connections working now?
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This firmware was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Multi-window mode
Enable Developer options
Enable Multi-window mode
MTP
By default in Marshmallow charge only, need select MTP
ExtSdcard
On start need once set up sdcard - portable/internal storage
Root
Settings -> About tablet -> press 7 times "Build number"
Then Settings -> Developer options -> Root access
Stylus gestures
Settings -> Language & input -> Stylus gestures
Gestures work only when you press a button on the stylus.
Known Issues
...
Links
LineageOS Build:
6: 20170713: restore livedisplay functionality, security patch 2017-06-01: https://drive.google.com/file/d/0B-6nm7Jks0W5UjZDNlN5V2dXdlU/view?usp=sharing
5: 20170516: https://drive.google.com/file/d/0B-6nm7Jks0W5WElSSzNJSE9nMnM/view?usp=sharing
4: 20170411: security patch 2017-04-01: https://drive.google.com/file/d/0B-6nm7Jks0W5OHRMMWNEb09xWHc/view?usp=sharing
3: 20170307: https://drive.google.com/file/d/0B-6nm7Jks0W5Nk1rM0RTcW5lakU/view?usp=sharing
2: 20170217: https://drive.google.com/file/d/0B-6nm7Jks0W5dE9fQ3hOeXdjOVk/view?usp=sharing
1: 20170125: microphone in the skype - done: https://drive.google.com/file/d/0B-6nm7Jks0W5U0N5WldUZHdkSkE/view?usp=sharing
CyanogenMod Build:
36: 20161109: https://drive.google.com/file/d/0B-6nm7Jks0W5YXNjTWlUQlNERk0/view?usp=sharing
35: 20161012: https://drive.google.com/file/d/0B-6nm7Jks0W5V1QwRE9maWxmVU0/view?usp=sharing
34: 20160921: the September update of the Google Security systems: https://drive.google.com/file/d/0B-6nm7Jks0W5OFdud3BqeV8ycnc/view?usp=sharing
33: 20160807: the August update of the Google Security systems: https://drive.google.com/file/d/0B-6nm7Jks0W5aEx1NlpZdVQ5U3c/view?usp=sharing
32: 20160708: the July update of the Google Security systems: https://drive.google.com/file/d/0B-6nm7Jks0W5elZWRXNvU1hIdWs/view?usp=sharing
31: 20160609: the June update of the Google Security systems: https://drive.google.com/file/d/0B-6nm7Jks0W5TWJNb0pYeGRZbG8/view?usp=sharing
30: 20160525: with cyanogenmod gello browser: https://drive.google.com/file/d/0B-6nm7Jks0W5Qm5zeHBSblQ3b3c/view?usp=sharing
29: 20160524: https://drive.google.com/file/d/0B-6nm7Jks0W5cGVESjhteDA5STg/view?usp=sharing
28: 20160510: https://drive.google.com/file/d/0B-6nm7Jks0W5VXRSZEV2NGJ2dGs/view?usp=sharing
27: 20160504: the May update of the Google Security systems: https://drive.google.com/file/d/0B-6nm7Jks0W5M2FDa0FJdG96Ykk/view?usp=sharing
26: 20160430: https://drive.google.com/file/d/0B-6nm7Jks0W5SkduNTNsN3dNYzA/view?usp=sharing
25: 20160415: https://drive.google.com/file/d/0B-6nm7Jks0W5ZHpVS2UtbHctcU0/view?usp=sharing
24: 20160406: the April update of the Google Security systems: https://drive.google.com/file/d/0B-6nm7Jks0W5UDBJd1NnVW05THc/view?usp=sharing
23: 20160402: https://drive.google.com/file/d/0B-6nm7Jks0W5MnB3MkJHMHl0M2s/view?usp=sharing
22: 20160317: android-6.0.1_r22, rollback fips_crypto_utils: https://drive.google.com/file/d/0B-6nm7Jks0W5OHBtMWEwX19SeVk/view?usp=sharing
21: 20160308: the March update of the Google Security systems, small update Wi-Fi (on the load some games (like Boom beach) was the problems with WiFi - it was reconected several times, as a result - long download): https://drive.google.com/file/d/0B-6nm7Jks0W5eDFXSXdmZEVVV0k/view?usp=sharing
20: 20160303: https://drive.google.com/file/d/0B-6nm7Jks0W5VUNPQTFpZ2diRnM/view?usp=sharing
19: 20160301: https://drive.google.com/file/d/0B-6nm7Jks0W5N2R6OXMyTFNLRTA/view?usp=sharing
18: 20160226: huge graphic update - gpu driver (adreno) from latest lg g3 kernel and the new adreno proprietary files (up OpenGL ES 3.0 from 127 to 140 version): https://drive.google.com/file/d/0B-6nm7Jks0W5c0M2NENVWWJROVE/view?usp=sharing
17: 20160222: new config for audio and graphics: https://drive.google.com/file/d/0B-6nm7Jks0W5WS1DYTlTUnR0VU0/view?usp=sharing
16: 20160218: https://drive.google.com/file/d/0B-6nm7Jks0W5VGRkdXBuR05LLVU/view?usp=sharing
15: 20160213: https://drive.google.com/file/d/0B-6nm7Jks0W5QV8zSmdVbDFhd1k/view?usp=sharing
14: 20160212: fix gps:
in new format: https://drive.google.com/file/d/0B-6nm7Jks0W5bmRSZHl0UGdwZTA/view?usp=sharing
in old (like 1-12 versions) https://drive.google.com/file/d/0B-6nm7Jks0W5cTQzMEFaSnAxOVU/view?usp=sharing
if you get error during flash firmware in new format - flash old version and please send me system partition size (you can simply install terminal and run command df)
13: 20160211: https://drive.google.com/file/d/0B-6nm7Jks0W5UHJqak9KU3g4LVE/view?usp=sharing
12: 20160209: https://drive.google.com/file/d/0B-6nm7Jks0W5YXo2eDBVdkRSNnM/view?usp=sharing
11: 20160202: https://drive.google.com/file/d/0B-6nm7Jks0W5R0tpTjNOYkNSUVk/view?usp=sharing
10: 20160128: https://drive.google.com/file/d/0B-6nm7Jks0W5bU5DWlhad28weWM/view?usp=sharing
9: 20160124: https://drive.google.com/file/d/0B-6nm7Jks0W5VGp3QlQ5dHA0NG8/view?usp=sharing
8: 20160123: https://drive.google.com/file/d/0B-6nm7Jks0W5OTJpX2NTLVJGRUk/view?usp=sharing
7: 20160116: fix changing network type (lte3g2g): https://drive.google.com/file/d/0B-6nm7Jks0W5LW15TlJ2UHdwdjA/view?usp=sharing
6. 20160112: fix incoming calls, enable accept all file types in code (bt, meneses.leonardo please check it): https://drive.google.com/file/d/0B-6nm7Jks0W5VDV2bnhVMlhHbzQ/view?usp=sharing
5. 20160110: https://drive.google.com/file/d/0B-6nm7Jks0W5MUdWZEMtQVQwa3M/view?usp=sharing
4. 20160106: fix ril: https://drive.google.com/file/d/0B-6nm7Jks0W5THg2QUpUdmgtVG8/view?usp=sharing
3. 20160104: fix ir and flip: https://drive.google.com/file/d/0B-6nm7Jks0W5UG14UWU2QWVuTGs/view?usp=sharing
2. 20160104: fix camera, AudioFX, sdcard, general update: https://drive.google.com/file/d/0B-6nm7Jks0W5MllsQ2ZJeXBuMVE/view?usp=sharing
1. first public, but still very draft version: https://drive.google.com/file/d/0B-6nm7Jks0W5VkdhM1dkMlJQR1k/view?usp=sharing
Gapps
http://opengapps.org/
Platform: ARM
Android: 6.0
Recovery
Official TWRP: http://forum.xda-developers.com/showthread.php?t=2706982
Sources
cm13.0 branch, in readme file (see device tree) all instructions for build.
Sources: https://github.com/CyanogenMod/
Device: https://github.com/Valera1978/android_device_samsung_viennalte
Kernel: https://github.com/Valera1978/android_kernel_samsung_viennalte
Vendor: https://github.com/Valera1978/android_vendor_samsung_viennalte
Thanks
Thanks to CyanogenMod team
XDA:DevDB Information
CM13.0 for SM-P905, ROM for the Samsung Galaxy Note Pro 12.2
Contributors
Valera1978
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 20160112
Stable Release Date: 2016-01-12
Created 2016-01-14
Last Updated 2016-01-14
Can we expect also a MM version for the p900? Nothing happens there.
Gesendet von meinem LG-H815 mit Tapatalk
FrankFieb said:
Can we expect also a MM version for the p900? Nothing happens there.
Gesendet von meinem LG-H815 mit Tapatalk
Click to expand...
Click to collapse
Unfortunately at this moment I have only p905.
Thx for that sad answer.
Gesendet von meinem LG-H815 mit Tapatalk
@Valera1978
Thanks my friend for this also awesome rom!
Looking forward for new updates :good: :good: :good:
Awesome!!!! :good: :good: :good: New rom available!
---------- Post added at 09:56 AM ---------- Previous post was at 09:29 AM ----------
@valera1978
Such an awesome advance into fix those, now old, bugs huh!? Kudos, excellent work my friend!
Does not detect simcard.
Read first post:
Known Issues
1. RIL....
lauffer said:
Does not detect simcard.
Click to expand...
Click to collapse
The LP version has RIL working flawlessly if you really need it. For now, I gonna stay on LP until our beloved dev @Valera1978 gets RIL fixed :good: :good: :good:
havent tried this yet
but man thank you so much please keep working and updating this one
have a pleasant day ahead
Thanks for this Awesome ROM
1st I tried the 2nd version and another day I installed the latest (3rd) version on top of it.
Looking forward for new updates...
New CM13 build is up! RIL is fixed! Thanks to our beloved dev @Valera1978
Yes, sim card is working fine with 20160106 version.
Overall looks fine.
is there a simple way to fix sdcard permissions in MM?
abofaizan said:
Yes, sim card is working fine with 20160106 version.
Overall looks fine.
is there a simple way to fix sdcard permissions in MM?
Click to expand...
Click to collapse
@Valera1978
Supersu would fix also this?
abofaizan said:
Yes, sim card is working fine with 20160106 version.
Overall looks fine.
is there a simple way to fix sdcard permissions in MM?
Click to expand...
Click to collapse
What is wrong with sdcard? On first start - you can setup it as portable\internal and then all working as usual in Lollipop.
for example: https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/109134/p/1449,9582
@Valera1978: I can confirm that so. The sdcard is detected then normal and has write access. I've marked the sdcard as portable.
Just a short feedback..
The rom runs like a boss! No glitches or issues at all.
It's running fast, smooth and reliable. For sure a daily driver.
I thought that it should become an Official CM13 for sure.
All thanks to our beloved dev @Valera1978 Excellent job my friend!
@Valera1978, do you accept donations? Excelent Job!!!
I get a 404 error trying to download the Recovery link. Any alternative?
aviator1 said:
I get a 404 error trying to download the Recovery link. Any alternative?
Click to expand...
Click to collapse
I'm sorry, my fault. I copied from the cm12.1 thread. Link updated.
http://forum.xda-developers.com/showthread.php?t=2706982
This Thread is deprecated!
Please use https://forum.xda-developers.com/sony-xperia-z1-compact/development/rom-lineageos-15-1-xperia-z1-compact-t3884247/
We'll provide Lineage 15.1 builds there as well. They come in two different flavours:
pure LineageOS
Security hardened microG LineageOS
Functionality is completely the same as provived by the builds from this thread - they are build from the same sources. Only difference: The new builds are signed to guarantee a maximum of security.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Status
List template by AdrianDC
Code:
- Boot : Ok
- GApps : OpenGApps Micro recommended
- Partitions (Data, Cache) : Ext4 and F2FS supported
- Bluetooth : Ok
- WiFi : Ok
- WiFi Hotspot : Ok
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Ok
- Lights : Ok
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- Touchscreen : Ok
- FM Radio : Ok
- ANT+ : Ok
- Vibrator : Ok
- Microphone : Ok
- Audio & music : Ok
- Bluetooth audio : Ok
- MHL: didn't test
- NFC : Ok
- Kernel : Ok
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Ok
- USB : Ok
- USB OTG : Ok
- Encryption : Ok, but installing updates only works with adb sideload!
- SEPolicies : Enforcing
Download
https://androidfilehost.com/?w=files&flid=269301
latest version: https://www.androidfilehost.com/?fid=11410963190603873784
Click to expand...
Click to collapse
FAQ
What about device encryption?
Device encryption is working. You only have to keep in mind that you need a PC with adb to install systemupdates.
Flashing via recovery isn't working until now, because there isn't a recovery capable of decrypting Oreo /data partitions at the moment. But an easy "adb sideload" should do the job. Or installing from the external SD card.
Click to expand...
Click to collapse
What about reboot to recovery?
Reboot to recovery is only working with magisk installed. Investigating this...
Reboot to recovery is working as it should now (and of course also without magisk).
Click to expand...
Click to collapse
What about GPS?
GPS apps like GPS Status&Toolbox or SatStat don't get location fixes. Nevertheless navigating with Osmand or googleMaps should work. Positionfinding is also slow. Got better
Click to expand...
Click to collapse
I found a bug. What should I do?
We need your feedback for optimization. But your feedback is only useful in connection with logs --> see section Bugreports
Click to expand...
Click to collapse
What about root access?
Root isn't included per default (except root over adb, but it's off by default).
If you want to gain root access to your apps use one of these (depending on your taste/needs):
Official Lineage Add-on https://download.lineageos.org/extras use su (arm) 15.1 here and flash via TWRP
Magisk https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
Bugreports
You'll find information about logging here.
Please also note how you got the error or how it can be reproduced.
Click to expand...
Click to collapse
Sources
Kernel: https://github.com/AICP/kernel_sony_msm8974
Manifest: https://github.com/115ek/manifest
Click to expand...
Click to collapse
Credits
SpiritCroc: big thanks to him for maintaining the device trees and a lot of very useful hints
rcstar6696
SuperLamic
drakonizer
AdrianDC
munjeni: thanks for tips and tricks
nailyk: thanks for tips and tricks
All the other contributors on sony msm8974 platform
LineageOS team
Click to expand...
Click to collapse
XDA:DevDB Information
Lineage OS 15.1 for Xperia Z1 compact - amami, ROM for the Sony Xperia Z1 Compact
Contributors
115ek, SpiritCroc, drakonizer, rcstar6696, SuperLamic, AdrianDC, nailyk, LineageOS team
Source Code: https://github.com/115ek/manifest
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Beta Release Date: 2018-09-10
Created 2018-09-10
Last Updated 2019-03-18
Changelog
13.12.2018
fixed wrong bluetooth MAC address (00:00:00:00:5a:ad on all devices), now displaying correct device specific one
12.12.2018
synced LineageOS sources (security patch level December 05, 2018)
11.11.2018
fix problem with Lineage SU addon by using 64-bit binder API (thanks @NyQuilXT)
synced LineageOS sources (security patch level November 05, 2018)
14.10.2018
fixed GPS 3D fix
08.10.2018
fixed MHL (thanks @koron393)
added callrecording
synced LineageOS sources (security patch level October 05, 2018)
23.09.2018
fixed reboot to recovery without magisk
minor improvements from AICP devices trees (thanks @SpiritCroc)
synced LineageOS sources
10.09.2018
initial release
Hi 115ek. Thanks for making this. I'm not new to flashing but I have a question nonetheless. What do you mean by
Encryption : Ok but needs recovery capable of Oreo decryption for installing updates (AFAIK such a recovery doesn't exist until now for our device...)
Click to expand...
Click to collapse
I'm actually having some trouble finding a up-to-date recovery.
Jeroen1000 said:
Hi 115ek. Thanks for making this. I'm not new to flashing but I have a question nonetheless. What do you mean by
I'm actually having some trouble finding a up-to-date recovery.
Click to expand...
Click to collapse
You can use this https://androidfilehost.com/?fid=5862345805528046823 or that https://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/recovery-twrp-3-2-1-t3759450.
For Lineage 15.x flashing you need TWRP>=3.2.x If the version is older you'll end up in a error 7.
Concerning decryption: Google introduced some new encryption stuff and so the decryption of /data from inside TWRP is broken. Some guys are working on it (@nailyk).
Encrypting the device should work fine, but I don't know what happens if you want to update the encrypted device. (I'm going to test that ).
Basically you need to store the update package outside of encrypted partitions... Maybe adb sideload works - but it's circumstantial.
Edit:
That's only interesting if you plan to encrypt your device. Otherways you can relax.
Edit2:
adb sideload should do the job. But you need a PC for updating. Installing an image directly via recovery isn't possible until now.
With sources for both kernel and system unlike the other port! Thanks, I'll definitely be using this!
Xperia J1 Compact
could this work on an Xperia J1 Compact?
it's basically the same phone with the same specs right?
The rom looks very stable and balance, but I've some problems with root procedure. I tried the lineage addon, the root seems active, but opening apps (es. Ad away) results unrooted, any ideas?
Update: Now Works. Flashed lastest Magisk
Amazing to see this old device on Oreo, just installed and it feels smooth and nice. Just a pity that I have broken the sim card connectors inside so I cant use it as a phone but I will fins use of it at home just for fun. Thank you for your work 115ek :good:
Great to see this rom realy! This rom have stock camera?
munjeni said:
Great to see this rom realy! This rom have stock camera?
Click to expand...
Click to collapse
What do you mean with stock camera?
There was a thing with kernel versions 3.4 and 3.10, wasn't it? We're using 3.4.
Concerning the camera: I'm not that expert, but it looks okay I would say.
Feel free to contribute: There's still the reboot-to-recovery problem and Pie is in the starting blocks.
115ek said:
Feel free to contribute: There's still the reboot-to-recovery problem and Pie is in the starting blocks.
Click to expand...
Click to collapse
my phone reboots to recovery.
Need to install Magisk
without it I also do not reboot to recovery
raschad said:
my phone reboots to recovery.
Need to install Magisk
without it I also do not reboot to recovery
Click to expand...
Click to collapse
Thanks, but I already knew this
But I like to reboot to recovery without magisk. I think there are people around who don't like/need magisk (including me).
The fact that it works with magisk may locate the problem to the boot.img. I have init_sony in mind and will check that.
Any ideas welcome
115ek said:
Thanks, but I already knew this
But I like to reboot to recovery without magisk. I think there are people around who don't like/need magisk (including me).
The fact that it works with magisk may locate the problem to the boot.img. I have init_sony in mind and will check that.
Any ideas welcome
Click to expand...
Click to collapse
I meant does this rom have stock camera blobs? Do you have property: ro.bootmode
and does /proc/cmdline shows diferent bootreason when you set reboot reason to recovery?
munjeni said:
Do you have property: ro.bootmode
and does /proc/cmdline shows diferent bootreason when you set reboot reason to recovery?
Click to expand...
Click to collapse
Good news: an easy import of your init_board_device.h did the trick. Maybe a timing problem?
Anyway: reboot to recovery is now working correctly, even without magisk
Is that okay for you: http://gerrit.aicp-rom.com/c/AICP/device_sony_msm8974-common/+/73688 ?
I just found this https://github.com/LineageOS/androi...neage-15.1/init/init_sony/init_board_device.h its just prototype so seems you have missed init_sony/init_board_device.h in your device tree...
munjeni said:
I meant does this rom have stock camera blobs?
Click to expand...
Click to collapse
We're using them https://github.com/AICP/proprietary_vendor_sony/tree/o8.1/rhine-common/proprietary/vendor, so I guess yes.
You're more into topic, aren't you? How to distinguish between AOSP and stock blobs? There were some mysteries around DRM, camera quality and so on. I remember a separate thread you also participated in...
But I'm not really into this topic.
munjeni said:
I just found this https://github.com/LineageOS/androi...neage-15.1/init/init_sony/init_board_device.h its just prototype so seems you have missed init_sony/init_board_device.h in your device tree...
Click to expand...
Click to collapse
No, it's actually in here: https://github.com/AICP/device_sony_msm8974-common/blob/o8.1/include/init_sony/init_board_device.h
But It's different from yours. Yours performs another keycheck.
Seems rom have stock blobs. To distinguish between AOSP and stock blobs... depends on kernel you have using, aosp kernel can't be used with stock blobs since aosp camera kernel module is diferent, but I'm out of development for long, have no free time and to be honest I still didn't forgot treatment & injustice for my status on xda, that made me more inactive here. Recognised members have bad treatment here, seems senior members have much more priority than recognised members, and thats reason why everybody here need to care how many hours per day to waste here. I decided to stop wasting my time on xda since xda leaders do not respect anybody's hard work here. I recommend the same to everyone here.
I tried "reboot to recovery", after Sony logo the phone reboot again (also if you press recovery button), and to enter in recovery you've to push again the button at the second reboot.
It is like a normal reboot... But it's not a problem ?
ULT][MO said:
I tried "reboot to recovery", after Sony logo the phone reboot again (also if you press recovery button), and to enter in recovery you've to push again the button at the second reboot.
It is like a normal reboot... But it's not a problem
Click to expand...
Click to collapse
What recovery are you using? I recommend this one: https://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/lineageos-12-1-z1c-current-sec-patches-t3614936.
With mine from here https://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/recovery-twrp-3-2-1-t3759450 it still won't work. Maybe a timing thing.
But it's okay if we have at least one working TWRP.
And oreo /data decryption is still an issue we have to address.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.x (Pie),which is designed to increase performance and reliability over stock Android for your device.All the source code for LineageOS is available in the LineageOS GitHub repo.And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.Official LineageOS website : http://lineageos.org
Downloads Links
LineageOS 16.0 (Unlocked Bootloader) :Test builds :
lineage-16.0-20191019-UNOFFICIAL-odin.zip | by CyberWalkMaN for Xperia ZL
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Google Applications (optional) :OpenGapps : http://opengapps.org/ (Use packages for ARM, Android 9.0, Nano or Pico)Information : Flash the GApps before the first boot. If not, a clean flash is recommended.Flashing and updatingLineageOS clean install :- (Optional) Flash the boot.img kernel from the ROM zip with Fastboot or Flashtool- (Optional) Wipe the data & cache (Backup to make sure not to loose data)- Flash the LineageOS ROM zip from the Recovery- (Optional) Flash the GApps to have the Google Applications- (Optional) Every additional zip you want to flash- RebootLineageOS update / upgrade :- (Information) Don't wipe anything unless you want to- (CM / UNOFFICIAL) Nothing to wipe when switching- (FUTURE RELEASES) Might need clean, informations will be updated- Flash the latest LineageOS ROM zip from the Recovery- (Optional) Flash the GApps on first install / upgrade. Not required later, but do update sometimes- (Optional) Every additional zip you want to flash- RebootLineageOS addonsu for root access :- (Information) Read the Root section of the Q&A thread- (Download) Download the addonsu for arm : LineageOS Downloads / Extras- (Optional) Flash the zip on a working Lineage installation (once)- (Information) Upon ROM updates, the addonsu is preserved- Reboot
Issues and reports- Report issues only if you are using the ROM kernel- If an additional mod is installed, make sure it's unrelated, and mention it- Make sure the issue wasn't discussed earlier in the threads- Share a log of the error with CatLog for example
About LineageOS Legal : http://lineageos.org/legal/The LineageOS team would like to thank everyone involvedin helping with testing, coding, debugging & documenting! Enjoy!
Also thanks to :- The LineageOS Team- The CyanogenMod Team- Everyone involved in working and testing
XDA:DevDB Information
[ROM][FINAL][9.0] LineageOS 16.0 for Xperia ZL, ROM for the Sony Xperia ZL
Contributors
CyberWalkMaN, AdrianDC
Source Code: https://github.com/fusion3-common
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2019-04-22
Last Updated 2019-10-20
FEATURES AND ISSUES
Code:
- Boot : Ok
- GApps : OpenGApps Nano Ok
- FOTA Recovery : Ok (see below)
- WiFi : Ok (real SONY MAC address)
- Bluetooth : Ok (real SONY MAC address)
- WiFi Hotspot : Ok (2.4GHz only)
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Ok
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- AOSP sensors : Ok
- FM Radio : Ok
- Vibrator : Ok
- Microphone : Ok
- Audio & external audio : Ok
- Bluetooth audio : Ok
- NFC : Ok
- Kernel : Ok
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Ok
- SEPolicies : Work In Progress
At the moment, FM radio, manual network selection and auto brightness does not work (maybe something else). New builds will be uploaded as source updates / bug fixes are updated.
camera ok?
using as a daily cell phone, this is fast, congratulations.
Switch from nkomarn Lineage 16.O build. Camera works okay, so it was great. Only problem is flashing twrp, cannot successful flash using the app. Always go back to lineage recovery even light indicator goes purple to orange. Any workaround?
Also power off function not work, it rebooted. Anyways, it was great and thank you for continue work on this. Cheers! ?
Sent from my Sony Xperia ZL using XDA Labs
Just started testing this Rom, my feedback for now is:
Autorotate is not working.
Can't change any sound (calls, SMS, etc)- (APP crashes).
I've experienced some random reboots in the first few hours after flashing, it seems stable now.
Advanced reboot is not working properly.
Magisk is working fine.
Nova Launcher is working fine.
I'll continue to test...
Hope my feedback can help make this better.
hi, many thanks to develper! smooth running even such older device! the only issue is battery indicator always start from 12% but I am not sure if it is common issue.
Flash the latest build 0803, Sensors are now working. Auto Rotate is working, since sensor driver is there. FM Working properly also.
Still have issue on Turn Off, it keep restarting.
Cannot able to flash Twrp Recovery, still booting to lineage recovery.
But still, thank you for your time on updating this Rom
Sent from my Sony Xperia ZL using XDA Labs
Fiz uma instalação limpa do zero. Há 2 dias estou usando e sem bugs, ou reinicialização inesperada. Ótimo trabalho e muito obrigado por isso =D
New build uploaded (lineage-16.0-20190824-UNOFFICIAL-odin.zip), major changes since May:
All sensors works now (Thanks to @Chippa_a)
Manual network selection fixed
Telegram calls fixed (Need to confirm)
FM Radio fixed
Small gps improvement
Performance improvement
Updated kernel (fixed bug with rebooting instead of shutting down and some other bugs), also we now use binder and lmk from AOSP 3.18 kernel
SELinux denials resolved at 90%
Magisk issue fixed
Android 9.0.0_r46 (August security patches)
Addonsu is already included, you can enable root access in the developer settings
CyberWalkMaN said:
New build uploaded (lineage-16.0-20190824-UNOFFICIAL-odin.zip), major changes since May:
All sensors works now (Thanks to @Chippa_a)
Manual network selection fixed
Telegram calls fixed (Need to confirm)
FM Radio fixed
Small gps improvement
Performance improvement
Updated kernel (fixed bug with rebooting instead of shutting down and some other bugs), also we now use binder and lmk from AOSP 3.18 kernel
SELinux denials resolved at 90%
Magisk issue fixed
Android 9.0.0_r46 (August security patches)
Addonsu is already included, you can enable root access in the developer settings
Click to expand...
Click to collapse
Thank you for the update! I dirty-flashed it over the 0803 build. You see, I run the stable Magisk v19.3, which, along with some modules, then allowed me to pass both Safetynet tests. Not anymore. As you stated that Selinux was almost ready, I had uninstalled ibuprophen's The SELinux Switch app prior to flashing the new build. I was using it in order to set Selinux to enforcing. As Selinux is still off in the new build, I tried to install the app back, but the new build doesn't allow me to do it. Even the zip, although correctly installed in recovery, after booted up, no SELinux Swich app is in the drawer, because directory /data/app/com.ibuprophen.selinux-1 has been deleted during the boot up process! What's happening?
EDIT: I decided to do a clean install. Everything is back to normal! Thanks, anyway!
Pixel Launcher
Thanks again for your hard work in bringing Android 9 to this very old, but still powerful, device of ours.
Well, I prefer Pixel Launcher over the embedded home app, but it keeps crashing all the time upon being selected as the default home app. For those who also plan to use Pixel Launcher, edit /data/system/packages.xml, and add up the following entries, under <package name="com.google.android.apps.nexuslauncher"> and <perms>:
Code:
<item name="android.permission.STATUS_BAR" granted="true" flags="0" />
<item name="android.permission.MANAGE_ACTIVITY_STACKS" granted="true" flags="0" />
Could you make such changes in your next build?
After flashing the 0824 build, i experienced much better scrolling experience, performance improved a lot.
Also Twrp works now and turn off function work properly, no need to reboot and press volume down go to stock recovery just to turn this off. So thank you for continue working on this
Sent from my Sony Xperia ZL using XDA Labs
I thank you for continuing to develop! I'll install that, i report issues!
Perfect, bug-free, fast and stable ROM, using with magisk, everything runs perfectly.
New build uploaded (lineage-16.0-20191019-UNOFFICIAL-odin.zip), major changes since August:
Fast battery drain fixed (for 15.1 nightlies too)
SELinux denials resolved at 99% (You can make builds in enforced SELinux, but I would recommend continuing to build them in permissive). Current build in permissive SELinux.
Oktober security patches
Minor performance and stability improvements (for 15.1 nightlies too)
Added missing props for gps and Miracast.
Build status - Stable.
Addonsu is already included, you can enable root access in the developer settings
This is where my support for android 8-9 for Z/ZL/ZR/Tablet Z ends, this build will be the last. All the changes made in the sources are already available on github.com/LineageOS, if someone wants to continue supporting and get the official LineageOS 16.0 - write to PM, I will explain in detail what remains to be done in the sources. Also, if someone wants to try to build other roms for our devices based on android 8-9 from the available sources - try to choose CAF-based roms (for example, AOKP, LineageOS, Ressurection Remix, AICP, etc.), then with 95% chance you will build and run the rom. Our sources are based on CAF, and for the build of roms based on AOSP, additional fixes are required, plus there will be problems with sound anyway.
I also want to note that I made a most part of the changes made in 16.0 to the official 15.1 nightlies, which should significantly improve their stability and performance
CyberWalkMaN said:
New build uploaded (lineage-16.0-20191019-UNOFFICIAL-odin.zip), major changes since August:
Fast battery drain fixed (for 15.1 nightlies too)
SELinux denials resolved at 99% (You can make builds in enforced SELinux, but I would recommend continuing to build them in permissive). Current build in permissive SELinux.
Oktober security patches
Minor performance and stability improvements (for 15.1 nightlies too)
Added missing props for gps and Miracast.
Build status - Stable.
Addonsu is already included, you can enable root access in the developer settings
This is where my support for android 8-9 for Z/ZL/ZR/Tablet Z ends, this build will be the last. All the changes made in the sources are already available on github.com/LineageOS, if someone wants to continue supporting and get the official LineageOS 16.0 - write to PM, I will explain in detail what remains to be done in the sources. Also, if someone wants to try to build other roms for our devices based on android 8-9 from the available sources - try to choose CAF-based roms (for example, AOKP, LineageOS, Ressurection Remix, AICP, etc.), then with 95% chance you will build and run the rom. Our sources are based on CAF, and for the build of roms based on AOSP, additional fixes are required, plus there will be problems with sound anyway.
I also want to note that I made a most part of the changes made in 16.0 to the official 15.1 nightlies, which should significantly improve their stability and performance
Click to expand...
Click to collapse
Thanks for your hardwork and making a stable build, but i encounter issue Installing it.
Clean Flash it including system, but result in Rebooting to twrp, tried to flash previous Build then Update, stuck to Boot Animation and Reboot to Twrp. I'm quite sure the file is not corrupted, downloaded it two times. Sadly it was the Final build but hoping you will address and fix it. Thanks
[Updated]
Hello!!
Kran007 said:
Thanks for your hardwork and making a stable build, but i encounter issue Installing it.
Clean Flash it including system, but result in Rebooting to twrp, tried to flash previous Build then Update, stuck to Boot Animation and Reboot to Twrp. I'm quite sure the file is not corrupted, downloaded it two times. Sadly it was the Final build but hoping you will address and fix it. Thanks
[Updated]
Click to expand...
Click to collapse
Could you try the rom? or you can't intall it anyway? I gonna try it in the xperia zl that i will give to my father, but i can't get some error, He gona kill me! Actually , his ZL is running august version.
Can someone make a Build with December Security Patch?
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Display > lockscreen > advanced settings (this wont to do anything)
- Instagram video recording (You will sound like a robot)
- Wi-Fi display reboots the phone
- Green pictures when using the stock camera/ Whatsapp in lowlight (this is related to YUV processing). Use provided gcam instead.
- Report unknown bugs with logs please!
Instructions :
Clean flash:
- Flash latest Pie ROM by Xiaomi (10.0.13.0). You may use option to retain userdata.
- Use fastboot to boot to latest TWRP.
- Falsh the TWRP installer zip and Force-encryption-disabler zip
- Reboot to TWRP
- Flash the ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Dirty flash (upgrade from existing AOSiP 9 install):
- Reboot to TWRP
- Factory reset in TWRP. No need to wipe userdata! (Skip if you are on ten already)
- Flash ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Note: It is strongly advised to make a backup before upgrading!
Downloads :
Download from Sourceforge
Open GApps Note: OpenGAPPS for ten now officially out, so link changed. Nano package is still recommended!
Recommended Gcam
Kernel Source
Device Tree
Vendor Tree
Props to all the guys from daisy-development-q and especially Lyceris-chan!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
Lyceris-chan
Tunasahinn
acras01
pawelik001
Offain/33bca
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
gumka77 said:
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
Click to expand...
Click to collapse
I used the OpenGAPPS from test folder I linked in the OP. Bit... might work, but no guarantee. Just try them and report back, so maybe other users can learn from your experiences.
Note: Updated my main phone from AOSiP Pie to Ten and had some wierd issues. Factory resetted in TWRP and now everything working. So making a backup and factory reset before updating is recommended
When viperos q?
Thanks you , I see your sources is stable thanks for upgrade aosip
opal06 said:
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Device side should be fine, but please report all bugs here with logs!
Instructions :
Follow guide by davidrocher: https://github.com/tkchn/daisyinstall
This works for Android 10 too! Please use correct version of OpenGAPPS.
Note: It is strongly advised to make a backup before upgrading and performing a factory reset in TWRP.
Downloads :
Download from Sourceforge
Open GApps
Kernel Source
Device Tree
Props to all the guys from daisy-development-q and especially acras1!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Click to expand...
Click to collapse
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
See if this works for you:
View attachment Clock_v1.0.0.zip
Thanks for the rom, what base is needed?, is November security patch?
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
opal06, kudos for signature spoofing built-in, I can use microG.
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Thank you all very much for your positive feedback.
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
As for the missing clock, I did not notice it during testing, but you are obviously right. For a stock feeling you can download the Clock app by Google, but there are many other good alternatives.
AOSiP updater is not working because I did not update the OTA file. AOSiP ten is still beta from ROM source side, so I won't enable OTA until it's official from their side.
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
As base any pie base should work, but latest is best.
schmidt_here said:
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
Click to expand...
Click to collapse
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
gumka77 said:
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Click to expand...
Click to collapse
Probably, just try and report. If something goes wrong, go to TWRP and flash ROM again without wiping data. You won't loose any settings or data.
Plis build with nitrogen kernel
test
opal06 said:
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
Click to expand...
Click to collapse
Yes, it's enabled. It doesn't disturb me, maybe i've to make a fresh install and take another version base.
Yesterday i had an issue, i couldn't download from play store until i deactivated and reactivated the app. Also i couldn't install apk's downloaded manualy from website.
Maybe it's a unique incident
schmidt_here said:
Also i couldn't install apk's downloaded manualy from website.
Click to expand...
Click to collapse
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
celrau said:
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
Click to expand...
Click to collapse
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
lacia-chan said:
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
Click to expand...
Click to collapse
I just did some reading on this, you are right
Flashing Nitrogen R2 kernel results in bootloop with this rom. R1 works fine. Any fix?
good job
I'm using your rom for 1-2 days now Looks like every features work really well to me. I'l report back later if I see anything. Thanks OP