You may also call this reversed USB tether.
This might come in handy if you're near a computer (Win XP/Win7) and there's no Wifi to connect to etc..
So after some research and trying I've found some information on how to do this.
Requirements:
* Android 2.2 (or an older version with a root tethering app)
* ADB from Android SDK, or a rooted Android 2.2 with terminal in root mode
STEP 1:
Install USB drivers from Android SDK.
STEP 2:
Connect USB cable and activate USB Tethering.
You should see a new network interface. (On XP you might need to install the RNDIS driver manually, see below)
If you're also missing RNDIS driver on Win7, look here.
Win XP manual driver install Android USB Ethernet/RNDIS: (You can skip this if you're on Win 7)
1. Download the following configuration file inside the *.zip attached to this post (tetherxp.inf) to your Windows XP computer.
2. Use the USB cable that came with your phone to connect your phone to your computer.
3. On the Android phone, press Home > Menu > Settings to open the Settings application.
4. Press Wireless & networks > Tethering & portable hotspot.
5. Check USB tethering.
6. When Windows XP’s New Hardware Wizard opens, select No, not at this time and click Next.
7. Select Install from a list or specific location and click Next.
8. Click Browse to browse to the directory where you installed the configuration file you downloaded in Step 1 and click Next. Windows XP uses the configuration file to configure itself to support USB tethering with the Android phone. (This might take a while)
9. When Windows XP finishes installing the software for Android USB Ethernet/RNDIS, click Finish.
STEP 3:
Bridge the 2 network interfaces.
STEP 4:
Setup usb0 interface of your phone. You have to options:
1. From your computer, execute:
./adb shell netcfg usb0 dhcp
2. Or in a root terminal on your phone, type:
su
netcfg usb0 dhcp
You should now be able to connect to Internet on your phone using your computer's Internet connection.
Try to do a ping www.google.com to be sure.
STEP 5:
To shut down the reverse-tethering, first unbridge interfaces on your computer:
sudo ifconfig eth0 down
sudo ifconfig usb0 down
sudo ifconfig br0 down
sudo brctl delbr br0
sudo ifconfig eth0 up
sudo dhclient eth0
Then on your phone, uncheck the USB Tethering option.
Quote...
It is working now. After setting up ICS type in console emulator on your phone:
ifconfig usb1 192.168.2.2 netmask 255.255.255.0 up
route add default gw 192.168.2.1 dev usb0
iptables -F
iptables -F -t nat
setprop net.dns1 8.8.8.8
setprop "net.gprs.http-proxy" ""
Click to expand...
Click to collapse
Hope this helps some one who wants this to the right direction.
And maybe we're able to create an app to do this all automated.
Known issues but does not apply to all users:
1. Internet in browser application does not work.
2. Can't ping domain name.
For a little more info check out the sources, this includes the Linux version too.
Sources: Google android, Mycila
Nice info
Going to post a link on the hero forum where someone was wanting to do this. I wonder if this will work on a froyo hero too...
it would be cool if one of the devs could write a small app to switch this on n off great find tho shoemeistah
Thank you for the guide, It worked fine. There are several things not working though:
- can't download apps from market, they stuck on "downloading"
- my google account don't sync
- other apps don't update themselves. For example my twitter app won't show any new tweets until I open it and manually press "refresh"
I searched for this long time ago, even created a thread about it awhile back, didnt have luck like you did though
I gave up on it eventually, it would be nice to make an app out of it.
mind asking how did you confirm the net to be working on browser? by pinging google.com?
since i saw the last line you put "Internet in browser application does not work."
You can do that in the terminal
[U][B] Internet connection on your Android phone via your PC [/B][/U]
I think I found the best solution. Check it out connectify.me
I wanted to use my PC wired internet & I was astonished that this wasn't available in my HTC Desire & 1st Android device!. I looked over the net, I found many options but most asked for a rooted device! I didn't want to root my brand new Desire.
Connectify is an easy to use software router for Windows 7 computers. After downloading and installing the lightweight application, Connectify utilizes your computers' built in Wi-Fi card to wirelessly share any available Internet connection: a cable modem, a cellular card, or even another Wi-Fi network. Other Wi-Fi enabled devices including laptops, smart phones, music players, and gaming systems can see and join your Connectify hotspot just like any other Wi-Fi access point and are kept safe and secure by password-protected WPA2 Encryption.
I tried it & it's working perfectly for me .. It's a free app.
-----------
Phone: HTC Desire (SIM Free)
Type: Desire
Build: HTC Desire 2.2, 2.10 (kernel: htc 2.6.32.15)
Baseband: 5.09.05.30
Network: UMTS auto (EGY)
By me it didn't work. Using OpenDesire with Froyo 2.2
So I made it work, by edititng the .inf file.
Here the file for USB\VID_0BB4&PID_0C02.
For all which still have a problem(USB TETHERING ON DEVICE MUST BE ACTIVE, ALSO THE IDs DIFFERS BETWEEN CONNECTED WITH ADB OR NOT), go into the device manager -> open the device -> goto tab details -> choose device id
look at it, you see somewhere vid_XXXX and further pid_XXXX
open my file -> goto line 31 -> change vid_YYYY and pid_YYYY with what you see in your device dialog. the same you do on line 35. be careful with 0 or o.
Regards
Ralph
I am also using connectify, easy to install, set it up, connect with Desire, anything works fine.
Thanks GhostOfTheNet.
chrismast said:
I am also using connectify, easy to install, set it up, connect with Desire, anything works fine.
Click to expand...
Click to collapse
I appreciate the recommendations for other solutions.
But as you can see this thread is for a internet solution at places where is no Wifi available.
So please keep it on topic, thanks!
browser & webviews
Any idea why browser won't work?
I'm interested in testing against internal sites (of course no WAP here.. cuz they be scared i guess).. both Browser and embedded webviews.
connectify great program.works fine
its a default feature in hd roms but that doesnt work in all programs
Connectify doesn't work correctly with my Galaxy 5. It keeps connected for a short time then disconnects and then, connects again, connect, disconnect...
Does anyone know how to fix it?
Thanks Man
plz make a video tutroial of this
its difficult to under stand
does it actualy work?? anyone tried this and actualy worked??? just a simple yes or no.
thanks
small proble plz solve it
hi
I have a small problem in it when my device is not in usb tethering mode
i can see it in my adb devices
as soon as is start usbtethering it say no device found
plz help me
thanks a lot !!!
realy nice guide! Thanks!
Hi there, I am using CM7 RC1v2 on my motorola defy. I am facing a problem which whenever i connect my phone to windows using phone portal the usb tether cnt be checked. But when i connect using "charge only" the things become available again but i still could not connect. Anybody face this problem and can help me to solve it? Thx very much!
Phone portal run on specific IP number and it uses different port and this explain why USB tether won't run.
I'm using it and here's my steps.
AFAIK, the pc required the USB tether driver for it to run properly. It should automatic install of the required driver. Once the driver is installed, you could perform a few steps here. I'm using Windows 7
1) Goto Control Panel - Network and Sharing Center - Change Adaptor settings.
2) Disable any active Local Area Connection if there are any of them running
3) Enable the one USB tether(it might already enabled by default but you could double check it).
4) It will auto verifying and connect once it done verified.
5) Start your internet browser and enjoy(you may need to do: Internet Option - Connections - Lan Settings - Unchecked proxy server .
farsight73 said:
Phone portal run on specific IP number and it uses different port and this explain why USB tether won't run.
I'm using it and here's my steps.
AFAIK, the pc required the USB tether driver for it to run properly. It should automatic install of the required driver. Once the driver is installed, you could perform a few steps here. I'm using Windows 7
1) Goto Control Panel - Network and Sharing Center - Change Adaptor settings.
2) Disable any active Local Area Connection if there are any of them running
3) Enable the one USB tether(it might already enabled by default but you could double check it).
4) It will auto verifying and connect once it done verified.
5) Start your internet browser and enjoy(you may need to do: Internet Option - Connections - Lan Settings - Unchecked proxy server .
Click to expand...
Click to collapse
I have tried following ur steps but it still can't work. My pc was able to install all the driver except that when installing MTP USB driver, it failed.
i have the latest firmware ALL4, and this simple guide works perfects for tethering.
Thanx to user "AGENTFOUR20"
Found a solution to tmobiles user agent sniffer .
**Must be rooted for this to work * *
Steps:
1. Get TrevE Mod tether app
http://forum.xda-developers.com/show...php?p=34037922
(you will not get a internet connection using any other tether app while using the VPN app)
2. Get Hotspot Shield VPN
https://play.google.com/store/apps/d...51bGwsMSwyLDNd
(was mentioned in earlier post but couldn't get it to work)
3. Start Hotspot Shield VPN and connect
4. Start TrevE Mod Tether app
Problems?
Hotspot Shield does not connect or you get error 1028?
Get Tun.Ko from market and install it
Repeat step 3 and 4
https://play.google.com/store/apps/d...luc3RhbGxlciJd
Connected device does not receive internet?
I HAD TO FOLLOW THE STEPS BELOWS ON MY NOTE 2 STOCK ROM IN ORDER TO MAKE IT WORK
In TrevE Mod tether app go to settings and select Device profile and select Generic ICS/JB wanl0 . Now select setup and select Netd-Ndc master . Check box that says send Nets Max client . Check box WiFi-Reloads driver 2 . Check Routing fix .You may need to change ssid too .
I am using Chrome with no user agent switcher and no longer get errors when trying to play youtube videos
Please hit the Thanks Button
This work for anyone yet?
What is the purpose of the VPN? Is it required for tethering?
I'm trying to find information about a multimedia system i have installed in my Skoda, the sticker on the device says CNT100, which is manufactured by CarNeTek (device page - https://www.carnetek.com.tw/products_detail/15.htm, not sure if they are the manufactures or just a reseller).
The company which sell and install it locally are not willing to share any information about the device, and of course are not willing to unlock it (to install applications from the play store, tweak configuration, etc.).
On the device there are 6 dip switches (which i couldn't figure out what they control), and no visible button (to get into recovery), i can get to the play store, and install applications - but as soon the installation is completed - they get uninstalled (there is a list of application that are not automatically uninstalled).
The launcher looks like a custom local version, there is no way to get into the settings page and the notification bar cannot be clicked (or dragged down), if i click multiple times on the menu - i get a dialog for some configuration, where i'm prompt for password (the dialog has a random number on it - which i suspect is used to generate correct password).
is anyone familiar with this device? or can suggest a way to unlock it?
(attached images of the device and the boot screen)
Hey mrtowel!
Trying to figure out that as well.
You said "if i click multiple times on the menu"
Where is this menu? possible to send a photo of that?
I'm talking about an Israeli version
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
mrtowel said:
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
Click to expand...
Click to collapse
Hey!
Just found that new to me. Pushed 6 times on the clock of the weather widget and got a prompt for the password. I receive a 9 digit number with that.
Also found that if you do the same on the temperature indication, you'll be prompt for device restart.
So that's a progress.
Anyways, I will be happy to hear from you, what progress you have made on this.
Will send you a PM.
Did someone have any success?
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
gtrs36 said:
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
Click to expand...
Click to collapse
try to get to app store (in case it is installed) through one of the installed apps using the 'rate us' option, you can also try and push a play store link through bluetooth, if it works - the android system will launch the play store app, and you'll be able to setup your account.
Once you get to the play store - download and install Googel app (https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en) this will let you ask google assistant to 'Open Display Settings' (in my case this option let me enable the drag down menu, where i could easily access the settings and other stuff).
hope that helps
?
Hey did you succeed?
please help
Hi
did any one of you had any success with getting into setting menu ?
i can get to google play...but as was posted before, everything i try to install immediately erase itself.....
does any one have the approved app list from ituran ?
i do believe that together we can crack this....
thanks
Thanks for the tips I've made it to download youtube! But how I can bypass the limit to install all apps from play store?
Also how can I cancel the restrictions of using apps during drive?
Thanks
Allon
Hey @mrtowel any change you can share some more details?
I tried connecting to the USB with my laptop to try doing some adb commands but it did not detect anything
I'm also wondering about the dip switch
and how to get the password bypass
Would really like to hear some more details if you can share please?
Just came here to see if can recall my steps from last time i played with the device (i kind of gave up, as it worked well with what there is, but recent update made it work really slow).
turns out there is a post on facebook (https://facebook.com/groups/gilcar/permalink/729881061134680/?comment_id=729883497801103), i'm going to try and build some utility to generate unlock codes (last time, i managed to get to an adb terminal, but i wasn't aware of the `pm hide` option to disable the installation blocker ****).
will post updates here if i get some progress
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
mrtowel said:
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
Click to expand...
Click to collapse
Does this method work with Hyundai, Mitsubishi, etc...?
Hi Mr.
mrtoweldo you have any videos explain the steps in post #13 I will be thankful if you provide me with for urgent case.
thank you dear for great job