Only install Our Mine.ZIP Deleted Single Sim Patch Deleted:
1)Gsi .omg https://drive.google.com/open?id=1i8Jnh-ycbQXWChqqbeVG9lKQ4nL9Lhkl
Advice for everyone, no one uses a Project_Spaget X or 3.0 or old Do not use it with any gsi Except for pixels
Because you will notice a lot of problems with it, even if it is
He repaired it
Because I repaired and added files from Xiaomi
I think that if Astmrr society here will take the fittest and suits him for himself
Everything links has been deleted because it violates Forum Law No. 12
must read
Because I modified the work of a person
His work corrected him, with a lot of things being deleted
It is not enough to add his name to the topic
As for some of the last links, they were deleted
Because she was making very little profit from her
* This violates the forum rights
So bye guys
:good:
it May Take some time after go to wipe:select dalvik/art and cache and reboot to recovery
2) Extract Our Mine.ZIP and copy it TO Recovery Restore Click on the file Our Mine.ZIP and swipe to Restore Swipe to Restore ReboOt to System
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Everything has been deleted because it violates Forum Law No. 12
Because I modified the work of a person
His work corrected him, with a lot of things being deleted
It is not enough to add his name to the topic
So bye guys
:good:
First, this not a MIUI 11, because MiRoom build before MIUI 1 version, this just a MiRoom 11 Android 9
Fingeprint fix : can't fix because this not build by Phhusson's source, this Rom build from ErfanGSI tool so OEM Rom will error if using OEM Rom with other device
SIM Card : CronosKernel and Kraken RC9 just support Rom based Pixel Experience, AOSP so MiRoom can't using kernel to fix SIM Card
Real MIUI Port can be found here, this build from Phhusson's source with ErfanGSI Tool so you can be assured of safety : https://sourceforge.net/projects/aoihara-gsi/files/MIUI/
NindoS said:
First, this not a MIUI 11, because MiRoom build before MIUI 1 version, this just a MiRoom 11 Android 9
Fingeprint fix : can't fix because this not build by Phhusson's source, this Rom build from ErfanGSI tool so OEM Rom will error if using OEM Rom with other device
SIM Card : CronosKernel and Kraken RC9 just support Rom based Pixel Experience, AOSP so MiRoom can't using kernel to fix SIM Card
Real MIUI Port can be found here, this build from Phhusson's source with ErfanGSI Tool so you can be assured of safety : https://sourceforge.net/projects/aoihara-gsi/files/MIUI/
Click to expand...
Click to collapse
Yes my friend and i know ,,,But everything can be fixed and I will try,,,,When my mind gets rest ,,,I will not give up hhhh :laugh:
you are a genius thanks for continuing to fix for sure it is not easy to solve and that gives you twice as much merit to continue to fix almost everything
martinxdla said:
you are a genius thanks for continuing to fix for sure it is not easy to solve and that gives you twice as much merit to continue to fix almost everything
Click to expand...
Click to collapse
Thank you so much My friend
I will continue
Super plz fix volte for jio sim in india
Xxxnano said:
Super plz fix volte for jio sim in india
Click to expand...
Click to collapse
Okay I will do the beginning volte It takes time But I was fixing In something else in this rom fm radio and Searchlight
Our Mine said:
Okay I will do the beginning volte It takes time But I was fixing In something else in this rom fm radio and Searchlight
Click to expand...
Click to collapse
Thanks i wait your update your great.
Xxxnano said:
Thanks i wait your update your great.
Click to expand...
Click to collapse
I fixed VoLTE :good: u can try or stay
smart view soon i will fix it
Searchlight soon
hotspot soon Unstable
Wow very very Nice ,you are really cool because you don't give up I will Install this Rom
May Ahmed said:
Wow very very Nice ,you are really cool because you don't give up I will Install this Rom
Click to expand...
Click to collapse
شكرا مي
I can't because of google account
Edenilson10 said:
I can't because of google account
Click to expand...
Click to collapse
After app from Xiaomi
Very important Install it to work google play good
https://www.mediafire.com/file/9xvrh...r.com.apk/file
Excuse me for the delay
You can provide another link of the gsi not let me download it. thanks
External storage are not properly configured. It can't be read/scanned by apps like music player.
chechemon said:
External storage are not properly configured. It can't be read/scanned by apps like music player.
Click to expand...
Click to collapse
i understand
And sorry Although you addressed such a problem
to fix it
u you can move it to the system
download app Apps2SD from play store
and go to the app music player And moved it to
* the system
* And restart the device
Wait for the update to i will fix it
Our Mine said:
After app from Xiaomi
Very important Install it to work google play good
https://www.mediafire.com/file/9xvrh...r.com.apk/file
Excuse me for the delay
Click to expand...
Click to collapse
Link error
Edenilson10 said:
Link error
Click to expand...
Click to collapse
i update link http://www.mediafire.com/file/9xvrh...eabi-v7a%29%28nodpi%29_apkmirror.com.apk/file
Work
After app from Xiaomi
Very important Install it to work google play good
[/url]
Our Mine said:
Work GOog ROM MIUI 11 pin GSI
Stable
Quote:
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here.
Please take caution and be aware of what you are doing. And Always backup !
Wait for More Update (Soon)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello everyone
What's working :
Boots
RIL (Calls, SMS, Data)
VoLTE fixed
Wi-Fi
Blutooth
Camera fixed camera when video work good https://apk4free.net/footej-camera-premium/https://apk4free.net/google-camera/
Camcorder
Video Playback
Audio
Flash in In camera work When only used Without a camera flashlight is not working soon i will fix it
FM,I'm still fixing it , With a new update
GPS
what's not work
Soon I will fix it Wait for the updatehotspotIt works but is not stableSearchlight
Fm radio
You Tell me IfRany thing works
Now How INSTALL IT It is very important to take stepsWarning
*
These steps should be done in orderSo as not to make a mistake when taking off
This is just for make Partition vendor to work INSTALL Create vendor Only once used
https://drive.google.com/file/d/1xwHQzjYYvW-cxYq6e60YYXpEn1TCZLzj/view
Restart to Recovery[/url]
With the New update to the patch file work good If you have Gsi MixMiui No need Install it from the start
It was a mistake because I didn't pay attention to the site when uploading and now it's free to download Everyone can download now
Only install Our Mine.ZIP and CronosKernel-V5.0 GS-¦ Single Sim Patch :
https://www.europeup.com/8sb7jlvd3qeh
How INSTALL it
1)Gsi .omg https://drive.google.com/open?id=1i8Jnh-ycbQXWChqqbeVG9lKQ4nL9Lhkl
it May Take some time after go to wipe:select dalvik/art and cache and reboot to recovery
2) Extract Our Mine.ZIP and copy it TO Recovery Restore Click on the file Our Mine.ZIP and swipe to Restore Swipe to Restore ReboOt to System
And IF sim card not work don't worry will work Install this
GS-¦ Single Sim Patch, this last because if not the signal comes and goes.
https://drive.google.com/file/d/1Ej9CoyxuwK70isiU-mwHb5oPZ2yigo0J/view
after INstall CronosKernel-V5.0-Treble Reboot to Recover
after Install magisk
https://www.europeup.com/yy97oepvvyhi
8.Fix NFC
SIZE="3"]https://drive.google.com/open?id=1BhmaLbMyn4_Ivcz8a6FPyprh-1ro8BXL magisk ,module install it[/SIZE]
Restart to Recovery
7.fix, volte
https://drive.google.com/file/d/160ZCLvzzAAWIriBsnQLUZnEM6B8mY8rd/view go to recovery
After ,used this code is "*#*#86583#*#*"
wait for More Update (Soon) [/url]
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Fix SafetyNet on GSI open text follow the steps
Go to Recovery install magisk and after go to xda download module busybox for android ndk and download Magiskhide
props config and go to xda follow my steps this It takes time at
https://www.europeup.com/4touk9h21mmi
After app from XiaomiVery important Install it to work google play good
http://www.mediafire.com/file/9xvrh...eabi-v7a%29%28nodpi%29_apkmirror.com.apk/file
AppMusic It can be moved to the system By this Apps2SD You can download it from the Google Play Store
https://www.mediafire.com/file/gdor5ytwlyf2yse/Music_com.miui.player.apk/file
I've already done a file update
Because I worked to integrate everything from the reforms and With new applications from Xiaomi
But I have a bad internet in Egypt (Internet package)
And about Andorid 10 ROM MIUI 11 Q GSI ARM64 FOR J7Pro .,,It needs more time I still fix it When I find the time of the net mind[/CENTER]
Click to expand...
Click to collapse
Congratulations! Our Mine.
This MIUI works very well.
What works:
1.Adjustable brightness
2. good sound
3.The camera works very well, but for those who see the stretch image, go to the camera settings and choose the maximum resolution, and for the front and back.
4.Wi-fi works
5.Nfc works
6. VoLTE works
7.And more...
This rom can be used daily, with all confidence.
Congratulations Our Mine, and all the respect.
:good::good::good::good:
IMPORTANT
Can you indicate how to install step by step?
the directions you gave are very confusing
PLEASE CANNOT INSTALL IT
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is modded JUI ROM by @Cuoco92 running on android 7.1.1. I do not own and make this ROM but I have asked for @Cuoco92 permission to make a thread here so that we can all refer and share this ROM in one, easy and organized place.
I'm using C103 device but so far this ROM is working fine for me with working wifi, hotspot, bluetooth, compass and fingerprint.
Installation :1. Boot into TWRP
2. Make a backup (optional. I don't need backups because I'm flashing this right from the beginning, migrating from EUI)
3. Wipe>Format Data (this is to remove device encryption so that you can see your internal memory in TWRP)
4. Wipe>Advanced>Cache, Dalvik/ART, System, Data (wipe)
5. Copy ROM into internal memory.
6. Go back to TWRP main page and select Install.
7. Flash the ROM.
8. Device will be automatically restarted after flashing finished. Don't worry if it does.
Downloads :
- ROM (VR12 from GDrive)
- VR10 (stable, from AFH)
BETA Builds Updates :- VR13.2
Features :
- Android 7.1.1 Nougat
- New recents compared to the iOS like EUI
- Tethering data limit
- Auto connect in File Transfer Mode
- Dolby and Viper4Android pre-installed
- Latest 3.2.1 TWRP automatically flashed after ROM flash finished.
- CameraHAL3 enabled ( in Cuoco app ; pre-installed with ROM)
- Adaway pre-installed (also in Cuoco app)
- Gapps preinstalled
- Better battery life, better heating management
- Rooted with Magisk v16.3
What's working :
1. Wifi and tethering
2. Fingerprint unlock
3. Root
4. Compass
5. SLR (bokeh), Mono Mode in camera.
6. Band 3 and Band 5 LTE, WCDMA, GSM.
7. Pretty much everything so far...
What's Not Working (in BETA):
- Some users reported speaker bugs coming from C103 devices. You can try this fix here
- For some reason Vanced youtube is not working in both TWRP install and Magisk Install
- Video recording does not work due to mic problem.
- You can try the mic fix using Magisk module here and see if it fix it. Voice call is working after using this module.
- PreInstalled Viper4Android do not work and buggy. @Cuoco92 has removed it in VR13 release.
Special thanks to @Cuoco92 for this wonderful ROM and for allowing me to create a thread for his ROM here. Check out all of his wonderful work in AFH here :
Screenshots :
Some camera samples :
Bokeh :
Mono :
Auto :
Some extra notes to C103 users :
This ROM was built by @Cuoco92 for C106 devices. So expect some bugs for your device as I have already written on the 1st post. However, you can this fix as shared by my local Coolpad Cool 1 community users and see if it works for you. It works for them but I have not yet tried this fix as I currently doesn't have much free time due to work.
If you're eager to fix it, you can try to :
1) Roll back stock EUI for C103.
2) Install stock EUI for C106 using Coolpad Manager.
3) Install official JUI for C106 using Coolpad Manager.
4) Install TWRP on your Official JUI.
5) Flash this Cuoco ROM.
*Some users reported their C103 works well without bugs when doing this steps since this ROM was built for C106 originally. I have not tested this yet because I have no problem with unable to record video since I don't use them. But you can try and let us all know if it works.
Thank you for shearing this Rom and a big thanks to the Dev @Cuoco92.
Magisk modules are working?
It can be works for c103 indian version??
reddsmokee said:
Magisk modules are working?
Click to expand...
Click to collapse
Which module?
[email protected] said:
It can be works for c103 indian version??
Click to expand...
Click to collapse
Works for me. Just wipe everything before flash. Follow the guides. It should work fine. I'm using C103 too.
But c103 indian version is different than Malaysian ....
After installing JUI Indian version c103 have bugs like no sound , second sim not working.
Congratulations on the initiative and thank you!
[email protected] said:
But c103 indian version is different than Malaysian ....
After installing JUI Indian version c103 have bugs like no sound , second sim not working.
Click to expand...
Click to collapse
Bro...read the first post. I AM using C103. When you do a full wipe, your device will be recognized as C106 after flashing this rom. I'm using it and so far everything is working fine. 4G LTE, second sim, speakers...
kodbz said:
Congratulations on the initiative and thank you!
Click to expand...
Click to collapse
It's about time actually. We need more thread in order to gain full functional device section.
vulturext said:
It's about time actually. We need more thread in order to gain full functional device section.
Click to expand...
Click to collapse
Maybe you should include a "From EUI to JUI" guide to avoid bricked devices.
You need to upgrade using Coolpad assistant, right?
I haven't made the move yet, but thanks for posting an organized thread. Going to upgrade my C103 soon.
Also, perhaps throw a link to GCam. Not sure which version/settings work best (haven't tested yet).
vulturext said:
Which module?
Click to expand...
Click to collapse
Generally friend, except youtube vance. For example viperx, ios emojis or systemless xposed?
Palm Trees said:
Maybe you should include a "From EUI to JUI" guide to avoid bricked devices.
You need to upgrade using Coolpad assistant, right?
I haven't made the move yet, but thanks for posting an organized thread. Going to upgrade my C103 soon.
Also, perhaps throw a link to GCam. Not sure which version/settings work best (haven't tested yet).
Click to expand...
Click to collapse
Coming soon. I don't have too much time at hand for now. Only some free time.
Edit : Guide to flash TWRP in EUI here : https://forum.xda-developers.com/android/development/guide-easy-twrp-root-using-qfil-eui-t3781171
reddsmokee said:
Generally friend, except youtube vance. For example viperx, ios emojis or systemless xposed?
Click to expand...
Click to collapse
Bro, viper4android is included in rom. Font changer is included too. I've installed busybox module from magisk manager and it's working fine. I don't use Xposed.
Very good rom, keep up the great work.
Hello, thank you for the great Work, the ROM works almost perfect.
BUT I have the Problem that my sim Card can't find any Connection at all. Before i flashed the ROM there was no Issue with it. Can anyone help?
Pavel0815 said:
Hello, thank you for the great Work, the ROM works almost perfect.
BUT I have the Problem that my sim Card can't find any Connection at all. Before i flashed the ROM there was no Issue with it. Can anyone help?
Click to expand...
Click to collapse
Have you tried creating new APN?
Yes, created new APN, checked Baseband, IMEI, Airplane Mode and so on, everthing fine. But at Testing Menu it says that Radio is turned off. (Wifi/BT is working)
Also, the SIM is not detected after a Reboot. I have to take it out and in again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
''#DroidOnTime''
Device: LG G4 (H815/H811)Build Status: Unofficial
"This is a user friendly thread, all your suggestions are important to us and will be taken into consideration.."
DotOS is an Android Rom which focuses on performance and stability. We focus on making our rom look and feel great without struggling on Performance and Battery! So that one can get most out of his/her device.....
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, Data and ART/Dalvik cache.
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Flash the root solution of your choice (optional).
7. Reboot your device.
Download ROM:H815/H811:http://https://mega.nz/#F!q8JUyYaY!UqDjGUC2guCKVyQYQ1LKjA
dotOSteam
AOSP
JDC Team
Aosp Extended
Dirty Unicorns And all other open source Devs/Teams.
Kernel source:
https://github.com/Suicide-Squirrel/Titan-Kernel-LG-G4
DotOS Telegram Channel:
http://t.me/dotOSchannel
DotOS Telegram Group:
http://t.me/dotOS
KNOWN ISSUES- Distorted Bluetooth Audio in a call
Special thanks to:@aoleary
@VmasterL
@ThePiGuy
@steadfasterX , your TWRP kick ass
@kessaras , G4 development is live cause of you..
XDA:DevDB Information
DotOS 2.5 for LG G4 (Oreo), ROM for the LG G4
Contributors
WiZaRd981, VmasterL, aoleary, kessaras, ThePiGuy
Source Code: https://github.com/Suicide-Squirrel/Titan-Kernel-LG-G4
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: !!>>>>> Nougat v29A <<<<<!!
Based On: DotOS
Version Information
Status: Stable
Current Stable Version: 2.5
Stable Release Date: 2019-01-20
Created 2019-01-21
Last Updated 2019-03-26
Reserved
Screenshots:
Looks great man!!
Hey.
First of all thanks for Another ROM to this devices.
One question to anyone who maybe stumped on this?
All thread refer to the Bluetooth calls distorted bug, but there is one that at least on LineageOS is present: - Magisk will not work with a encrypted LG-G4 at least in LineageOS, and AICP roms with Titan Kernel from @kessaras . I suspect that will not work with any of the roms, can anyone she'd some light on this one?
So anyone who wants to go encrypted can only stay on Laos or AICP that supports Laos SU-Addon if you need root Access.
So, if it confirms can you add Magisk when encrypted to the known bugs where it applies?
Thanks and keep then coming ?
hteles said:
Hey.
First of all thanks for Another ROM to this devices.
One question to anyone who maybe stumped on this?
All thread refer to the Bluetooth calls distorted bug, but there is one that at least on LineageOS is present: - Magisk will not work with a encrypted LG-G4 at least in LineageOS, and AICP roms with Titan Kernel from @kessaras . I suspect that will not work with any of the roms, can anyone she'd some light on this one?
So anyone who wants to go encrypted can only stay on Laos or AICP that supports Laos SU-Addon if you need root Access.
So, if it confirms can you add Magisk when encrypted to the known bugs where it applies?
Thanks and keep then coming ?
Click to expand...
Click to collapse
Even if we add it to known bugs , we do not develop magisk.
Someone already tried to report it to magisk thread and he grabbed logs and we checked them , but logs don't say anything. In dmesg and logcat we can clearly see everything going fine and when magisk start suddenly everything starts to die.
The magisk developer didn't even try answer to that guy.
So without a way to find the problem , we can't fix that problem.
If the magisk developer can guide you guys on how to get a log that's showing the issue and if the issue is somewhere in device tree or blobs or kernel, I will be glad to fix it.
kessaras said:
Even if we add it to known bugs , we do not develop magisk.
Someone already tried to report it to magisk thread and he grabbed logs and we checked them , but logs don't say anything. In dmesg and logcat we can clearly see everything going fine and when magisk start suddenly everything starts to die.
The magisk developer didn't even try answer to that guy.
So without a way to find the problem , we can't fix that problem.
If the magisk developer can guide you guys on how to get a log that's showing the issue and if the issue is somewhere in device tree or blobs or kernel, I will be glad to fix it.
Click to expand...
Click to collapse
Thanks.
I guess the developer is doing army service.
I was not complaining, Everytime a new Magisk major version cakes out I test it. So, let's wait, and LineageOS is working fine and been updated with Android monthly updates. Thanks for that.
Now if we could only buy a 3.5" Jack to a Bluetooth phone adapter, that would do the trick
can't wait to try this one, thank you! i hope cts profile will be ok
ps: i can't find this release 2019-01-20 but only otOS-O-v2.5-h815-UNOFFICIAL-20181227, is it ok?
Gigio755 said:
can't wait to try this one, thank you! i hope cts profile will be ok
ps: i can't find this release 2019-01-20 but only otOS-O-v2.5-h815-UNOFFICIAL-20181227, is it ok?
Click to expand...
Click to collapse
Yea it's okey.. CTS profile is still false but something is wrong with build.prop (fingerprint some creepy craps).. I will let you know when I resolve this..
Gigio755 said:
can't wait to try this one, thank you! i hope cts profile will be ok
ps: i can't find this release 2019-01-20 but only otOS-O-v2.5-h815-UNOFFICIAL-20181227, is it ok?
Click to expand...
Click to collapse
Resolved
Hi all,
I am currently on Stock MM. I just unlocked the bootloader and started looking for a good ROM to start with.
Do I read the OP correctly, that I first need Nougat before I install this ROM?
cheers,
HaMaHe
WiZaRd981 said:
Resolved
Click to expand...
Click to collapse
thank you!
please upload the new build as soon as you can, i don't know why i have problems with the 27/12 build
sometimes after it boot, booting animation > bip sound > text android > after the clock on unlock screen appears > screen bright at maximum, then black screen with a blu led and it freeze T_T
i re-downloaded rom and pico gapps 20/01/2019 .. i wipe everythings, i flashed in order rom, gapps and magisk and now it works, but even after some hours and reboot, it still slow to open everything, it not lag in menu etc.. wifi network is slow slow slow (i have a 200mbit) but 4g is fast, i can't understand which is the problem
I will re-try everything removing sd card and installing everything with usb-otg
I really like the rom style is very amazing, i hope with the next build, thank you again for your hard work
update:
i changed gapps pico with the 22/01/2019 release and now it seems it goes better (it's a little bit slow install apps: download and installation process)
it's not the first time it happened to me and with other rom that some gapp release broke something .. it seems strange or i'm just unlucky ^^ i really don't know and i'll not bore you about that, i'll continue to test and try about it
update 2:
it installed everything, a few reboot .. but it have micro freeze i notice because the seconds clock skip a lots of seconds and sometimes it shows the same seconds time :'(
update 3:
i don't know why, it's all very laggy and slow in every operations :'(
Gigio755 said:
thank you!
please upload the new build as soon as you can, i don't know why i have problems with the 27/12 build
sometimes after it boot, booting animation > bip sound > text android > after the clock on unlock screen appears > screen bright at maximum, then black screen with a blu led and it freeze T_T
i re-downloaded rom and pico gapps 20/01/2019 .. i wipe everythings, i flashed in order rom, gapps and magisk and now it works, but even after some hours and reboot, it still slow to open everything, it not lag in menu etc.. wifi network is slow slow slow (i have a 200mbit) but 4g is fast, i can't understand which is the problem
I will re-try everything removing sd card and installing everything with usb-otg
I really like the rom style is very amazing, i hope with the next build, thank you again for your hard work
update:
i changed gapps pico with the 22/01/2019 release and now it seems it goes better (it's a little bit slow install apps: download and installation process)
it's not the first time it happened to me and with other rom that some gapp release broke something .. it seems strange or i'm just unlucky ^^ i really don't know and i'll not bore you about that, i'll continue to test and try about it
update 2:
it installed everything, a few reboot .. but it have micro freeze i notice because the seconds clock skip a lots of seconds and sometimes it shows the same seconds time :'(
update 3:
i don't know why, it's all very laggy and slow in every operations :'(
Click to expand...
Click to collapse
Sometime I have that lags when wanna flash any Oreo ROM.. So..
• Download MM bootloader with N modem file
• Clean wipe (System, Data, Dalvik, Cache)
• Flash MM bootloader with N modem file
• Flash DotOS 2.5 and Gapps (nano or pico recommended)
• Reboot (Don't flash Magisk!!)
• It should be lag-free now, setup your Google account
• Reboot into Twrp and flash Magisk
Try with this way..
WiZaRd981 said:
Sometime I have that lags when wanna flash any Oreo ROM.. So..
• Download MM bootloader with N modem file
• Clean wipe (System, Data, Dalvik, Cache)
• Flash MM bootloader with N modem file
• Flash DotOS 2.5 and Gapps (nano or pico recommended)
• Reboot (Don't flash Magisk!!)
• It should be lag-free now, setup your Google account
• Reboot into Twrp and flash Magisk
Try with this way..
Click to expand...
Click to collapse
oook thank you! i'll try tomorrow and i hope to give you a positive feedback
ps: please can you link the .zip flashable mm bootloader with N modem file?
Is this one ok?
http://droid.binbash.it:8008/stock/LG/h815/29a/
http://droid.binbash.it:8008/stock/LG/h815/29a/LG-H815_v29A_bootloaderonly.zip
Gigio755 said:
oook thank you! i'll try tomorrow and i hope to give you a positive feedback
ps: please can you link the .zip flashable mm bootloader with N modem file?
Is this one ok?
http://droid.binbash.it:8008/stock/LG/h815/29a/
http://droid.binbash.it:8008/stock/LG/h815/29a/LG-H815_v29A_bootloaderonly.zip
Click to expand...
Click to collapse
This one: https://androidfilehost.com/?w=files&flid=194933
Big thanks to @kessaras
WiZaRd981 said:
This one: https://androidfilehost.com/?w=files&flid=194933
Click to expand...
Click to collapse
damn!!!! now it's fast like a bolt! i can't believe it
thank you! really really thank you
Light torch working?
Can you tell me somebody if light torch is working? Bad Bt-call is only one known bug?
Thank You!
Gigio755 said:
damn!!!! now it's fast like a bolt! i can't believe it
thank you! really really thank you
Click to expand...
Click to collapse
No worries :good:
avro04 said:
Can you tell me somebody if light torch is working? Bad Bt-call is only one known bug?
Thank You!
Click to expand...
Click to collapse
Torch is working with this app:
https://m.apkpure.com/flashlight-tile-fix-kenzo/com.umang96.flashlight
And yea Bluetooth Calls stays like a bug
WiZaRd981 said:
This one: https://androidfilehost.com/?w=files&flid=194933
Click to expand...
Click to collapse
MEIN GOTH
YOU SAVED MY LIFE
i thought i had a core problem or that roms were underperformend to reduce board problems... THANKS:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android Q for Daisy
Release: 10_R2 gsi by Erfan
Magisk: Magisk-v19.5-2019092201-ianmacd
Kernel CAF kernel by Ahmed (With changes thanks to Nysascape and Lacia-chan/me)
Changelog 9/4/2019 (i think)
- Added Google Play Services
- Fixed CTS
- Disabled Fingerprint gestures
- Added a fix for the fingerprints not saving
Changelog 26/9/2019
- Updated Google Play Services
- Updated Magisk to > Magisk-v19.5-2019092201-ianmacd
- Security : The security patch has been updated to 2019-09-05.
- Kernel : Default kernel is now CAF kernel with a few changes to improve boot times and the overall user experience. (flashing a custom kernel will revert those changes) and the charge speeds have been restored too from 1800 to 2000.
Bugs:
Audio - the headphone jack MAY not work it works for some users
Audio - some users reported in call audio problems/ mic problems
Bluetooth - Some users have been unable to use Bluetooth for file transfer.
System - System ui sometimes crashes when you log in to fast
CPU - There is a possibility your cpu will get stuck at the 2016 freq this can be fixed using the guide below
GMS - You may not be able to login to chrome etc. till you install the LATEST BETA GMS apk.
USB - You are unable to change the default USB config using your notification settings you can go to settings > developer options> default usb config. to change it in there.
Wallpapers - The live wallpaper picker will now crash by default switch to a static wallpaper as mentioned on older versions and disable the app if you encounter lag or battery drain.
Notes:
- Since i haven't managed to find a GCAM good enough to my comfort my standards yet i recommend you guys to use footej cam from the play store since you can record in 4K too!
- A way to fix the high cpu freq stuck bug is to make a script that runs on boot using either FKM or kernel adiutor and pasting this code from del.dog > https://del.dog/lapucunoqa.shell
when you create a script it should say system/bin or something after that press enter and paste the above code and make sure it runs on boot (ONLY DO THIS IF YOU EXPERIENCE THIS ISSUE CREDITS TO @eternityson FOR THIS FIX)
- To revert the repartition flash any stock version you want using edl you can find guides on how to do that on internet ^-^
Download:
https://drive.google.com/open?id=1bklaXtqKV_EeJMFiyfBZ8-BOPr6JEtgJ
DONT CHANGE SLOT AS THIS INSTALLER WILL ONLY INSTALL Q ON THE A SLOT
Install Guide:
Install the stock base 10.0.10.0 (some users reported that other builds work too i use 10.0.10.0)
Flash the Repartition script (https://drive.google.com/open?id=142fREwVsVSbaPse57LUgcGKHylYEhm9p)
Wipe data (yes)
Wipe everything except OTG and Sdcard
Flash Android Q install zip and boot to system
Welcome on Q
Please note that i don't support the use of custom kernels on Q
And keep in mind that modules like pixelarity can cause the overlay to look bad.
If you like my work feel free to donate over at : https://paypal.me/Lacia0chan
And feel free to join my telegram group where i release updates and more: https://t.me/joinchat/KMuhJlaL2qTkh_oTq7wKsg
XDA:DevDB Information
Android Q , ROM for the Xiaomi Mi A2 Lite
Contributors
kirito sao
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 10.0.10.0
Based On: AOSP
Version Information
Status: Stable
Created 2019-09-14
Last Updated 2019-09-26
Reserved
RESERVED
Just tried to flash ,but TWRP gives me this error: invalid zip file format
nikoman1987 said:
Just tried to flash ,but TWRP gives me this error: invalid zip file format
Click to expand...
Click to collapse
Yeah sorry bout that i screwed the zipping up new link has been posted my excuses for the problems >-<
kirito sao said:
Yeah sorry bout that i screwed the zipping up new link has been posted my excuses for the problems >-<
Click to expand...
Click to collapse
No problem ,thanks for your hard work ,will try the rom tommorow and i'll give you a feedback
nikoman1987 said:
No problem ,thanks for your hard work ,will try the rom tommorow and i'll give you a feedback
Click to expand...
Click to collapse
Amazing will be looking out for it ^^
Version
Hey, I'm sorry, I understand that you've tried on 10.0.10.0 but I wonder if you've got any feedback referencing anything about 10.013.0 build number aka august update. Thank you in advance.
bookerds said:
Hey, I'm sorry, I understand that you've tried on 10.0.10.0 but I wonder if you've got any feedback referencing anything about 10.013.0 build number aka august update. Thank you in advance.
Click to expand...
Click to collapse
Hiyaa welp i havent tried it myself there is someone that succeeded it so feel free to try it do note that if it doesnt work that i recommand clean flashing 10.0.10.0 before asking for help.
i hope everything ends up going okay lemme know! :good:
The download link is broken. Just to let you know. Thanks for your great work!
kirito sao said:
Amazing will be looking out for it ^^
Click to expand...
Click to collapse
Sorry bro ,but Error 404 -file not found. I just want to ask - is this rom a modified version of Q developer preview v6 ,or it is a stable version? Thanks
nikoman1987 said:
Sorry bro ,but Error 404 -file not found. I just want to ask - is this rom a modified version of Q developer preview v6 ,or it is a stable version? Thanks
Click to expand...
Click to collapse
for some reason xda keeps reverting the changes link will up in a sec, oh and its semi-stable i would say if you follow the guide everything should be fine beside the mentions bugs and no this is actually the first version of Q 10.r1 from walleye if im right (pixel 2) the system reports Pixel 2 XL because i used those props to pass cts and we get acces to ar stuff etc!
iastizar said:
The download link is broken. Just to let you know. Thanks for your great work!
Click to expand...
Click to collapse
Link has been fixed now sorry but xda keeps reverting my thread changes for some reason
iastizar said:
The download link is broken. Just to let you know. Thanks for your great work!
Click to expand...
Click to collapse
Link has been added again lets appreciate xda reverting my thread changes? or lets appreciate how buggy xda has become
kirito sao said:
for some reason xda keeps reverting the changes link will up in a sec, oh and its semi-stable i would say if you follow the guide everything should be fine beside the mentions bugs and no this is actually the first version of Q 10.r1 from walleye if im right (pixel 2) the system reports Pixel 2 XL because i used those props to pass cts and we get acces to ar stuff etc!
Click to expand...
Click to collapse
That's perfect ,because i have used all of the available developer previews ,and they were just pain in the...
Thanks for the fast responses!
kirito sao said:
for some reason xda keeps reverting the changes link will up in a sec, oh and its semi-stable i would say if you follow the guide everything should be fine beside the mentions bugs and no this is actually the first version of Q 10.r1 from walleye if im right (pixel 2) the system reports Pixel 2 XL because i used those props to pass cts and we get acces to ar stuff etc!
Click to expand...
Click to collapse
So i have downloaded the ROM ,tried to install it as you said: But then i have an error: Failed to mount vendor (invalid argument) ,right after this error,it says everything done,no need to install any patch,then reboot, but when i hit the reboot to system button,TWRP says : No OS installed. Tried almost everything: Fresh stock installation, tried to flash without formatting the system,tried to change slots.Every try gives me a boot loop,or no OS installed. Any advice?
nikoman1987 said:
So i have downloaded the ROM ,tried to install it as you said: But then i have an error: Failed to mount vendor (invalid argument) ,right after this error,it says everything done,no need to install any patch,then reboot, but when i hit the reboot to system button,TWRP says : No OS installed. Tried almost everything: Fresh stock installation, tried to flash without formatting the system,tried to change slots.Every try gives me a boot loop,or no OS installed. Any advice?
Click to expand...
Click to collapse
Ah Hiya can you use edl? you need to download mi flash and boot to fastboot when in fastboot type fastboot oem edl and open mi flash after that select your installer directory (you should be able to get what i mean hopefully >-<) and make sure that you select CLEAN not clean and lock after that boot to twrp and flash repartition after that boot twrp again and flash 2.1 should work that way lemme know!
kirito sao said:
Ah Hiya can you use edl? you need to download mi flash and boot to fastboot when in fastboot type fastboot oem edl and open mi flash after that select your installer directory (you should be able to get what i mean hopefully >-<) and make sure that you select CLEAN not clean and lock after that boot to twrp and flash repartition after that boot twrp again and flash 2.1 should work that way lemme know!
Click to expand...
Click to collapse
That was the first thing ,that i did after the first fail, i will try again ,but with different stock rom version and will get back to you
nikoman1987 said:
That was the first thing ,that i did after the first fail, i will try again ,but with different stock rom version and will get back to you
Click to expand...
Click to collapse
kk :good:
kirito sao said:
kk :good:
Click to expand...
Click to collapse
I have found the problem! It is with the Repartition script zip file, i have used another one ,that i was using for flashing beta preview Android Q and it worked from the 1st try, now testing
nikoman1987 said:
I have found the problem! It is with the Repartition script zip file, i have used another one ,that i was using for flashing beta preview Android Q and it worked from the 1st try, now testing
Click to expand...
Click to collapse
Could you share the script you used please?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 15.1 for Xiaomi Redmi Note 2 (HERMES)
ABOUT:
ROM Version: Beta
Device: Xiaomi Redmi Note 2 (HERMES)
Maintainer: @ibilux
Build Status: Unofficial
DISCLAIMER:
I am not responsible for anything that may happen to your phone as a result of installing custom ROMs and/or kernels.
You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
FEATURES:
• Working:
Adjustable brightness
Audio
Auto brightness
RIL (calls & mobile data & ussd)
Video
Gallery
Mic
Wi-Fi
FM-Radio
Bluetooth
Internet
GPS
Hotspot
SD Card
Online/Offline charging
Built-in Signature Spoofing (for MicroG)
USB tethering
IR Blaster
Vibration
Rotation sensor
MTP and Mass Storage modes
Lights
Camera (Photos & Video recording) [It's better to use Open Camera or Footej Camera Apps]
DT2W support.
• NOT working:
?
• Bugs:
?
PRECAUTION:
Read the entire OP before posting, downloading, or flashing ANYTHING
Follow all instructions
Please use the search function and read back a few pages before you post any questions
ALWAYS MAKE A NANDROID BACKUP
ALWAYS MAKE AN EXTERNAL BACKUP OF ALL DATA
INSTRUCTIONS:
NOTE:
If you are using the old unofficial Build make a clean flash and don't dirty flash.
CLEAN FLASH:
Reboot into the latest version of TWRP (from here)
Make a NANDROID backup and copy it an external medium (laptop, flash drive, etc) just in case something goes wrong!
Wipe Dalvik/ART cache, system, data, and cache partitions (ANY LESS IS NOT A CLEAN FLASH!)
Flash build
Wipe Cache [Not Necessary]
OPTIONAL: If you want root access, flash Addon SU or from official LineageOS extras
Reboot
DIRTY FLASH:
Reboot into the latest version of TWRP (from here)
Make a NANDROID backup and copy it an external medium (laptop, flash drive, etc) just in case something goes wrong!
Flash build
Wipe Cache [Necessary]
OPTIONAL: If you want root access, flash Addon SU or from official LineageOS extras
Reboot
DOWNLOADS:
ROM
TWRP 3.3.1
BUG REPORTING:
DO NOT REPORT BUGS IF YOU HAVE FLASHED MAGISK, XPOSED, A CUSTOM KERNEL, OR ANY OTHER UNSUPPORTED THIRD-PARTY MODS
The very first step will be to attempt a new download and CLEAN FLASH (WIPE DALVIK/ART CACHE, SYSTEM, DATA, AND CACHE).
Pull an ADB LOGCAT and copy & paste it to HASTEBIN .
Save the log and copy the URL.
Visit HERMES (REDMI NOTE 2 / 2 PRO) - OFFICIAL GROUP and post your issue with the HASTEBIN link of your bug.
Please also tell us what device you're running, what date the build is from, if it was a release build, what packages you flashed with it (what Gapps package, Magisk version, etc).
You may also report bugs in this thread.
Join us at Telegram:
https://t.me/joinchat/AAAAAEAcYGMW9RpRIW2-XQ
XDA: DevDB Information
LineageOS for Xiaomi Redmi Note 2, ROM for the Xiaomi Redmi Note 2
Contributors
Maintainer: @Bilux
This is all based on the work of @Dinolek and the help of other developers.
Thanks to @Dargons10 For building the roms.
XDA:DevDB Information
LineageOS 15.1 for Xiaomi Redmi Note 2 (HERMES), ROM for the Redmi Note 2
Contributors
ibilux, Dinolek
Source Code: https://github.com/ibilux/android_device_tree_hermes
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader & Latest TWRP Recovery
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 1.0.0
Stable Release Date: 2020-04-22
Created 2020-04-23
Last Updated 2020-05-04
TWRP:
MUST FLASH LATEST VERSION OF TWRP TO FLASH THIS BUILD, OR ELSE WILL GET THIS ERROR
DOWNLOAD TWRP 3.3.1
Reservation
Heads up, there seems to be an error in the device path in META-INF/com/google/android/updater-script which causes installation to fail (/system won't get mounted).
/dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name
on my particular phone this needs to be changed to....
/dev/block/platform/mtk-msdc.0/by-name
jblake said:
Heads up, there seems to be an error in the device path in META-INF/com/google/android/updater-script which causes installation to fail (/system won't get mounted).
/dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name
on my particular phone this needs to be changed to....
/dev/block/platform/mtk-msdc.0/by-name
Click to expand...
Click to collapse
you need to update TWRP to 3.2.3 or 3.3.1.
you can download it from (from here):
https://mega.nz/file/klkxybiL#IPM8W3uu3fd7ecD0hm87FWFRVs0tG02SfEjYezNtVQw
ibilux said:
you need to update TWRP to 3.2.3 or 3.3.1.
Click to expand...
Click to collapse
I updated to 3.3.1 in the process of trying to get the rom to install. I'll give your build of TWRP a try at some point.
Nice work by the way :good:. I've not tested extensively yet, but it boots up and appears to work without any obvious problems.
Dude, THANK YOU SO MUCH for this! I am so grateful
It works flawlessly and you gave life to my old phone.
BTW does anyone know any good Camera app? Or if you can enable Camera2Api in this device?
Thank you in advance
Just confirming..
Can this be dirty flashed over android 7 LineageOS
Xrredmi said:
Dude, THANK YOU SO MUCH for this! I am so grateful
It works flawlessly and you gave life to my old phone.
BTW does anyone know any good Camera app? Or if you can enable Camera2Api in this device?
Thank you in advance
Click to expand...
Click to collapse
Footej Camera works perfectly for me. But tbh i didn't test any other camera apps. so if u found any better camera app u can share it here to the rest of users.
https://mega.nz/file/Y1EQXIiA#Z8lGV9XbrkEbEmRuAQh4NK17hgXV7WxSQ8hQGF2hJbA
lohtse said:
Just confirming..
Can this be dirty flashed over android 7 LineageOS
Click to expand...
Click to collapse
Didn't test it. it may or may not work. u can test it and share the experience.
backup your data & apps just in case, using Migrate app, and do a clean fresh flash if it didn't work.
ibilux said:
Footej Camera works perfectly for me. But tbh i didn't test any other camera apps. so if u found any better camera app u can share it here to the rest of users.
[Mega Download Link: See above]
Click to expand...
Click to collapse
Just downloaded the app, and it is pretty much better than any other had already tested.
Thank you again mate, you made my day
ibilux said:
Didn't test it. it may or may not work. u can test it and share the experience.
backup your data & apps just in case, using Migrate app, and do a clean fresh flash if it didn't work.
Click to expand...
Click to collapse
Thank you for replying
Next question
Gapps? which version??
great work thank you
Ok so dirty flash was a huge fail for me so did a clean flash and EVERYTHING works great in fact it feels like a brand new phone.. DAMN it's great again... Having used LineageOS 14 and being hugely disappointed by it this rom is a MASSIVE BREATH OF FRESH AIR.. And has actually made my RN2 USEFUL again.... Thank you for your excellent hardwork...
one questions I have
How do I change from SU to Magikdisk, ???
So happy with this rom... Thank you for everything
lohtse said:
Thank you for replying
Next question
Gapps? which version??
great work thank you
Click to expand...
Click to collapse
i never used gapps. but some user recommended using this :
http://downloads.codefi.re/jdcteam/javelinanddart/gapps/MindTheGapps-8.1.0-arm64-20180808_153856.zip
ibilux said:
i never used gapps. but some user recommended using this :
http://downloads.codefi.re/jdcteam/javelinanddart/gapps/MindTheGapps-8.1.0-arm64-20180808_153856.zip
Click to expand...
Click to collapse
thank you in the end I used the ones off the gapps website and all worked fine.
lohtse said:
thank you in the end I used the ones off the gapps website and all worked fine.
Click to expand...
Click to collapse
I also used MindTheGapps from here wiki.lineageos.org/gapps.html
MindTheGapps-8.1.0-arm64-20180808_153856.zip filedownloads.codefi.re/jdcteam/javelinanddart/gapps,
like @ibilux said
Works fine
anyone flash MAGIK and XPOSED mods yet????
Just friggin loving this rom.... only issue I have had is occassionly it disconnects from WIFI and then take a long time to reconnect... other than that all works great.
for those wanting a better camera all the following work great
manual camera fx
open camera
camera zoom fx
rectrica
bandacam
DSLR camera
all with similar results and all pretty damn good.
possible second issue
if I add or change unlock pin code... RN2 just locks up... have to pull battery out, once rebooted code has been changed and can unlock phone fine after that... seems too be the initial action of adding or changing it that causes issue.
Hello,sir will you make DotOS v2.0 too For our Xiaomi Note 2?
my sim cards don't seem to work on this rom. i've had this issue before in RR 5.8.5 and the only way to fix it is just to reboot my phone and voila, it's fixed, but in this rom it can't even read my sim cards at all
edit :
sim 1 is working as of right now. i just had to wait for it to work though the signal cluster icons don't show that it does. sim 2 is still not working
i have successfully installed both magisk and xposed. they both work like a charm thus far. i'll let you know if there's anything going on
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
gapps (Download from here)
Magisk 20.0 or newer for root - (Download from here)
First time installation:
Boot a custom recovery
Format data, cache and system
Flash ROM
Flash GApps (optional)
Flash Magisk for root (optional)
Reboot
Update installation:
Boot a custom recovery
Flash new build
Reboot
Sources:
ROM: https://github.com/crdroidandroid
Device tree: - https://github.com/adazem009/android_device_asus_Z00L
- https://github.com/adazem009/android_device_asus_Z00T
- https://github.com/adazem009/android_device_asus_msm8916-common-Z00L/tree/Z00L/lineage-17.1
Vendor tree: https://github.com/markkiths/android_vendor_asus
Kernel source: https://github.com/AkagiShiroe/ICEY/tree/ICEY-TEST
Download:
ROM (Z00L): https://sourceforge.net/projects/adazem009-builds/files/asus_Z00L/crDroid/
ROM (Z00T): https://sourceforge.net/projects/adazem009-builds/files/asus_Z00T/crDroid/
Known issues:
SELinux permissive.
Screen recorder crashes SystemUI.
Camera app crashes.
Visit official website @ crDroid.net
Asus Zenfone 2 Laser/Selfie Telegram
crDroid Community Telegram
Donate to help our team pay server costs
Thanks for the hard work @adazem009.
Unfortunately there is the same audio bug as the other LineageOs based roms ....
I also confirm the camera crash after taking a photo.
Too bad, because the rom is very fluid and stable on Ze550kl Z00l.
Thanks a lot anyway
jimjack12 said:
Thanks for the hard work @adazem009.
Unfortunately there is the same audio bug as the other LineageOs based roms ....
I also confirm the camera crash after taking a photo.
Too bad, because the rom is very fluid and stable on Ze550kl Z00l.
Thanks a lot anyway
Click to expand...
Click to collapse
I'm going to fix camera and maybe screen recorder in the next build.
Update - 08/14/2021
Download (Z00L)
Download (Z00T)
August 2021 security patch
Fixed camera app crashes
Fixed some screen recorder crashes
Hi @adazem009.
The camera is now working.
Unfortunately there is always the problem of audio and speakerphone during calls.
It is a pity that this problem cannot be solved, it would be a great Rom.
Anyway great job and thank you very much
-
KevinTaswin said:
This ROM is great and so snappy, smooth like never before. This was an unedited footage using ScreenCam with 60 FPS. Unfortunately using the built-in Screen Recorder and with Audio Internal recording make the System UI not responding (at least on z00l 08/14/2021 build) and always pop-up again when you click Wait, by Closing the System UI I get the control back again, but l was throw back at the lock screen and the recording not saved.
If you kinda person that like to move your User App to System App like me to free up some space, I've got good news and I just found it. I try to move app to /system/priv-app folder, or /system/product/priv-app folder will resulting my device to bootloop, but I didn't try yet move app to /system/app. By removing the moved app to those 2 wrong folders I can get the bootloop away using TWRP File Manager. The right folder to not make your device bootloop is on /system/product/app. I don't know the exact reason, but that will make your phone boot normally when you move your User App to that folder. No need to change the permissions of each individual items, just move the App's folder you want right away to /system/product/app folder. I use the Xplore app to move the app, I guess you can also try using the TWRP File Manager.
Maybe that's all, thanks to @adazem009 for the great ROM.
Click to expand...
Click to collapse
You should never move apps to priv-app, I think that will give them more privileges.
adazem009 said:
You should never move apps to priv-app, I think that will give them more privileges.
Click to expand...
Click to collapse
Yup.
-
KevinTaswin said:
Hi @adazem009 I found a bug it's like Data Cellular leakage. I didn't buy a Mobile Plan and not turning on the Mobile Data whatsoever because I've WiFi at home. From day to day my balence goes down by a bit. Can you take a look how many messages below screenshot said "Sisa pulsa kamu continued with the balance left in Rp currency" that's roughly translate to "Your balance left in real world money currency in that SIM card (like Dollar $ currency)"
View attachment 5399209
At first I guess this not a big of a deal, but it's really a big problem till my basically run out and not even Rp 1 is left, fortunately that time I only put Rp 12.000 there (or equivalent to $0,80). I hope you can fix this bug on the September Security Patch update. Thanks.
Click to expand...
Click to collapse
It's possible that WiFi turns off to save power when you turn off the screen, but I'm not sure. Disabling cellular data should fix it.
adazem009 said:
It's possible that WiFi turns off to save power when you turn off the screen, but I'm not sure. Disabling cellular data should fix it.
Click to expand...
Click to collapse
I guess not, I always get this phone plugged into the wall all the time when it's turned on. Anyways I always used this phone like watching YouTube, Video Conference for 8hrs+ straight and never turned off the screen. Before I sleep at night, I powered off the phone
Edit: I guess this happen when the phone start-up because I'm getting the message again every start-up
Update
Download (Z00L)
Download (Z00T)
September 2021 security patch
Update
Download (Z00L)
Download (Z00T)
October 2021 security patch
Thanks!
Any updates on Android 11?
ghazh said:
Thanks!
Any updates on Android 11?
Click to expand...
Click to collapse
Someone has already built it, but I can't find the download link.
adazem009 said:
Someone has already built it, but I can't find the download link.
Click to expand...
Click to collapse
I see, please let us know if you do.
Thanks again for all the efforts
Update
Download (Z00L)
Download (Z00T)
November 2021 security patch.
Hi everyone. I have this old phone that I want to upgrade. It says it is z00ld but I am not seeing one from this section. Is it the same with the z00l variant? Thank you.
jayzky00 said:
Hi everyone. I have this old phone that I want to upgrade. It says it is z00ld but I am not seeing one from this section. Is it the same with the z00l variant? Thank you.
Click to expand...
Click to collapse
Yes, you can use the Z00L variant for Z00LD. It's what I'm using too.
hey guys, there seems to be a problem with sending an SMS. Is anyone else facing this issue?
nvm it works